Integration of T&EM with MM

What is the importance of integration of T&EM with MM.
Is it like, if every material (PC, projector, intercom set) is to be monitored for T&EM we need to do this?
My client is very young (one year) and there are not more than 200 employees. As of now they won't monitor materials for T&EM. But they are going to expand very fast. Do they need this integration?
Points assured!
Thanks
Nivedita.

see from page number 456 in the pdf:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PE/PE.pdf

Similar Messages

  • Integration of Adobe Flex with SAP Web Dynpro ABAP

    I am new to adobe flex development. i am following a tutorial prepared by
    Mr. Karthikeyan Venkatesan (Infosys Technologies Limited) Integration of Adobe Flex with SAP Web Dynpro ABAP-for ABAPers
    He used flex 3 to develop the flex application. i am using flex 4 downloaded from adobe(At a time Build release I used low version only 3.5). I followed all the steps. At a time of Run the data was not came.
    How to fetch the data?
    Please Guide how to proceed.

    Hi Laxmikanth,
    For Adebo Flex help..
    Please go through Thomas tutorial..
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163&overridelayout=true
    and ...
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307b434f-ff32-2b10-e885-991247270480?quicklink=index&overridelayout=true
    Hope it might helps you
    Thanks,
    Kris.

  • Integrating SuccessFactors PMS solution With SAP HCM without saving any employee master data in SF

    Hi Friends,
    We’re implementing SuccessFactors’s Performance Management Solution only at one of the client location in Saudi Arabia and trying to integrate with the On-Premise SAP HCM and Push the employee data to SF.
    However, due to security concerns customer doesn’t want to store any data on SucessFactors cloud solution to run the PMS cycle.
    During the purchase of license for SuccessFactors SAP has demonstrated client that, in SF a unique Id will be created for each employee, which will not be the actual UserID(PERNR)from SAP, and with this unique ID actual employee data will be tagged/linked  in SF which will fetch the data from SAP On-Premise system to run  the PMS cycle.  Once the user logins in SF, based on the unique ID data will fetch from SAP On-Premise system to SF on a real time basis and when the user logged out from the SF system, data should be cleared/deleted and nothing will be saved or stored in SF with respect to employee Master Data.
    I understand SAP has provided the standard add-on for the Employee Data Scenario between SuccessFactors and SAP HCM, which could have been leveraged here for integration using PI, however with the above limitation this solution is absolutely out of scope.
      Please advice, is there any solution where with PI if we can achieve the above requirement of client.
    Thanks,
    Farhan

    Hi Friends,
    We’re implementing SuccessFactors’s Performance Management Solution only at one of the client location in Saudi Arabia and trying to integrate with the On-Premise SAP HCM and Push the employee data to SF.
    However, due to security concerns customer doesn’t want to store any data on SucessFactors cloud solution to run the PMS cycle.
    During the purchase of license for SuccessFactors SAP has demonstrated client that, in SF a unique Id will be created for each employee, which will not be the actual UserID(PERNR)from SAP, and with this unique ID actual employee data will be tagged/linked  in SF which will fetch the data from SAP On-Premise system to run  the PMS cycle.  Once the user logins in SF, based on the unique ID data will fetch from SAP On-Premise system to SF on a real time basis and when the user logged out from the SF system, data should be cleared/deleted and nothing will be saved or stored in SF with respect to employee Master Data.
    I understand SAP has provided the standard add-on for the Employee Data Scenario between SuccessFactors and SAP HCM, which could have been leveraged here for integration using PI, however with the above limitation this solution is absolutely out of scope.
      Please advice, is there any solution where with PI if we can achieve the above requirement of client.
    Thanks,
    Farhan

  • Regd Integration of Domino.doc with Oracle 9i AS Portal

    I want to know whether the integration of domino.doc with oracle 9i as portal
    is possible or not.
    Can anyone guide me whether the integration is
    possible or not and if it is possible which document
    should i refer for the same.
    and i dont know much about domino.doc
    pls consider this as urgent
    Regds
    Rajesh Kanna.V

    1)Portal is an integrated component of 9iAS. You need to download all of 9iAS and select the minimal install option.
    2)We haven't tested this configuration, but as long as you set up apache appropriately to use different ports than the existing software it should work.
    3)Portal requires 8.1.6.2 Enterprise edition or 8.1.7 Standard edition. Personal Edition will not work.

  • [svn:osmf:] 13357: 1) Modified a integration tests to correspond with the change to PluginInfo becoming a class .

    Revision: 13357
    Revision: 13357
    Author:   [email protected]
    Date:     2010-01-07 17:05:22 -0800 (Thu, 07 Jan 2010)
    Log Message:
    1) Modified a integration tests to correspond with the change to PluginInfo becoming a class.
    2) Modified the DFXPParser class in the CaptioningPlugin to use the new TimeUtil class in the framework.
    Modified Paths:
        osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/parsers/DFXPParser.as
        osmf/trunk/plugins/CaptioningPluginIntegrationTest/src/org/osmf/test/captioning/TestCapti oningPluginInfo.as
        osmf/trunk/plugins/MASTPluginIntegrationTest/src/org/osmf/test/mast/TestMASTPluginInfo.as
        osmf/trunk/plugins/MASTPluginIntegrationTest/src/org/osmf/test/mast/managers/TestMASTCond itionManager.as

  • Integration of Oracle Apex with EBS R12.1.1

    Dear All,
    We are in process of integrating Oracle Apex 4.0.2 with EBS R12.1.1 with the help of http://www.oracle.com/technetwork/developer-tools/apex/apex-ebs-wp-cabot-consulting-169064.pdf.
    After doing all the steps, the moment when we navigate from EBS application to Apex application by clicking on the EBS menu link it ends up with below error
    "404 Not Found
    Resource /OA_HTML/null/pls/apex/f not found on this server"
    After some analysis i found the below code in "LaunchApex.jsp" for getting the profile value (supposed to be 'http://myserver:port') from custom system profile "APEX_HTTP_SERVER" and prefixing to "/apex/f?p=applicationid:page::APPS:::" is not happening properly
    String l_launcher = ctx.getProfileStore().getProfile("APEX_HTTP_SERVER");
    l_launcher = l_launcher + "/apex/f?p=" + p_application + ":" + p_page;
    l_launcher = l_launcher + "::APPS:::" + p_item_names + ":" + p_item_values;
    as we found that the custom system profile "APEX_HTTP_SERVER" not exist in EBS system. But it works without any page error if we hard code the entire apex application URL in l_launcher variable, but this takes us to EBS login page instead of Apex application page.
    So i feel we can't bypass using profile value from "APEX_HTTP_SERVER" as it has some relation with EBS application session.
    So could anyone please help me how we could create custom system profile "APEX_HTTP_SERVER" or any other options to make the seamless integration of Oracle apex with EBS works without any second login page
    Thanks in advance
    Edited by: 805196 on Aug 25, 2011 12:23 AM

    Hi,
    Create a profile under Application Developer Responsibility as follow:
    Name OAE_LAUNCHER
    Application <whatever>
    User Profile Name Oracle Application Express Launcher
    Description Oracle Application Express Launcher
    2. Set above profile value under System Administrator Responsibility -> Profile -> System, and search for the ‘OAE_LAUNCHER’.
    Set the value at Site Level as:
    http://<hostname>:<Apex port>/pls/apex
    Then instead of hardcoding the URL in the jsp, just give the profile name OAE_LAUNCHER that you have just created in the jsp.
    Hope this helps you
    Brgds,
    Mini
    If this is helpful or correct, assign points promptly.

  • Facing problem in integrating my custom jsp with the workflow engine

    Hi,
    I am using Jdeveloper 11.1.1.6.0 for BPM 11g implementation on my Application.I have Weblogic Server 10.3 Installed and configured the domain. Also the server is up and running.
    I am trying to create workflow and wants to integrate it with my custom jsp but i am facing problem in integrating my custom jsp with the workflow engine.Can you please answer the following questions:
    1)how to link BPM human task with my custom jsp (Requester jsp).
    2)how my custom jsp data(Requester data) will be stored in workflow engine and how the same data will be visible to the next custom jsp(Reviewer jsp).
    This is urgent .Any early reply will be great help.
    Thanks in advance.
    Edited by: 990133 on Mar 24, 2013 5:31 AM

    you forgot to add the usage dependency in the DC metadata section in your DC, you have to add the XSS~utils and fpm as a used DC's as part of your DC, try to add those, if you already done that, so check where missed the adding of used webdynpro components in any of the VAC's or FC's,
    Cheer,
    Appa

  • Integration of Oracle Apps with the Third Party Label Printing Software

    Hi,
    I am integrating Oracle Apps R12 with the third party Label Printing Software(Bartender).
    For generating the Label, I have to create the XML file in Oracle Apps and with the help of Oracle WMS i have to transfer the XML file to the TCP/IP Port.
    Third Party Label Printing Software will pick the file from the TCP/IP Port.
    I am not able to find the way to send the XML file generated by the concurrent program to the TCP/IP Port using Oracle WMS.
    Below are the few links for Oracle WMS:
    http://docs.oracle.com/cd/B25284_01/current/acrobat/115wmsug.pdf
    http://docs.oracle.com/cd/E18727_01/doc.121/e13434/T210618T210847.htm#T210864
    Thanks In Advance..

    Hi,
    I assume, i have already setup profile 'WMS: Label Print Mode' to Synchronous - TCP/IP.
    Basically, you dont have to create any concurrent program for XML creation, Oracle will do it for you 'out of box'.
    Also set 'WMS: Synchronous TCP/IP label request delay' to 100, this is a required step, though none of the documentation talks about it.
    if you think that all the requests are not handled correctly, then you will need to increase this delay further.
    Lastly, verify that the printer is setup correctly in Oracle (Place where you specify IP Address and port)
    Thanks,
    Hrishikesh

  • Integration of Oracle Apps with the Third Party Label Printing Software(Bar

    Hi,
    I am integrating Oracle Apps R12 with the third party Label Printing Software(Bartender).
    For generating the Label, I have to create the XML file in Oracle Apps and with the help of Oracle WMS i have to transfer the XML file to the TCP/IP Port.
    Third Party Label Printing Software will pick the file from the TCP/IP Port.
    I am not able to find the way to send the XML file generated by the concurrent program to the TCP/IP Port using Oracle WMS.
    Below are the few links for Oracle WMS:
    http://docs.oracle.com/cd/B25284_01/current/acrobat/115wmsug.pdf
    http://docs.oracle.com/cd/E18727_01/doc.121/e13434/T210618T210847.htm#T210864
    Thanks In Advance..

    Pl do not post duplicates - Integration of Oracle Apps with the Third Party Label Printing Software

  • Integration of service processing with warranty claims node not appearing

    Dear experts,
    Plant Maintenance and Customer Service => Maintenance and Service Processing => Integration of Service Processing with Warranty Claims
    Integration of service processing with warranty claims node not appearing in SPRO.We are using ECC 6.0.How should we get this node?
    regards,
    ashraf

    Hi,
    It will not be in core solution. As far as I know you need Aerospace & Defence solution (DIMP) for this functionality.
    -Paul

  • Integrating EP 6.0 with Solution Manager 3.2 .

    Can anyone please help me regarding the steps for integrating EP 6.0 with solution Manager 3.2.
    It would be nice if any one would direct me to any link or any presentation where in the steps for the above subject are illustrated.
    Regards,
    Ashish .A. Poojary

    Ashish,
    What is your requirement?
    Could you be more specific about the area your exploring
    Solution manager is huge...
    Please assign pts if it helps

  • Integrating Oracle eBusiness Suite with banking services using Oracle SOA

    Hi ,
    I am working on a project for integrating Oracle eBusiness Suite with banking services using Oracle SOA. We have implemented Oracle SOA and trying to call bank's services using SOA.
    The bank has provided its web services over http which accepts XML data as string through HTTPS post invocation and provides response accordingly in string XML Data.
    For each service, specific format of request and response message has been provided.
    I am trying to call their web services using HTTP binding adapter.
    I would like to know whether my approach of calling bank's web service using HTTP binding adapter is correct or not.
    Looking ahead for your valuable insight and advice.
    Thanks

    Hi,
    Thank you for your reply.
    Is the usage of B2B not applicable for this project ?
    Thanks

  • Integration of ABAP workflow with portal

    Hello Experts,
    Need urgent help on UWL configuration.
    We have integrated our ABAP workflow with portal through UWL.
    We have a Ad Hoc link in the ABAP workflow which takes us to some transaction. For some reason we are not able to view that link when we see this workflow through portal.
    1. Is is possible to show any Ad hoc links from ABAP workflow into portals?
    2. If yes, what is the process for the same? We did not get any relevant documents.
    Any inputs/sugessions are most welcome.
    Ashutosh

    Hi Ashutosh,
    Can you please send me the documents how did you resolve this issue?
    koti

  • Integration of BW system with R/3 system

    Hi,
    I have a doubt regarding integration of BW system with R/3 system.
    Can we integrate both the systems without using NetWeaver-XI,
    If so how can we integrate them and make the data to be interchaged between both BW and R/3 servers.
    Can we load both servers in a single opreating system and simultaneoulsy run both the servers and if so what is Hardware requirement we need.
    thanks and regards
    konala

    Hi,
    I am working on ABAP-XI and now I want to move in to BW stream.
    I am looking for Certification in NetWevaet2004s-BI7.0. through SAP / Seimens.
    Can any body tell the approximate Cost of Certification on BI7.0 in India as well as in USA also.
    Bye
    Satish Kumar Reddy

  • Integration of HR Masterdata with the third party Recruitment system

    Hi folks,
    I was doing some analysis regarding the process of integrating the HR Masterdata with the thrid party recuritment system. One of the process is exporting all the new hire data coming from the third party soffware( the entire hiring process will happen in this sytem)  into the HR Masterdata.
    From SPRO documentation I found there are two ways one is Inbound IDOC and the other is through interface. Since we do not have EDI service, we have to with interface, however it should not be an automated process. Because, the person getting hired has to have the intial procedure completed before hiring process occus and his data is entered into HR Masterdata. Hence the data coming from the interface file has to be processed manually
    How to configure this process in HR? The version we are using is 4.6C How can this be done?
    Any thoughts or ideas or leads would be really helpful.
    Thanks in advance,
    SK

    Hello Sk,
    i think the integration between SAP Recruitment and SAP Administration would be a bit more complicated as it is supplied from the SAP Recruitment tables which you probably would have to fill.
    As promised I had a look to t752f. Run the following code to add lines into the table. After the values were inserted you can run PA48 without any other configuration. You will see an new line which you can select and than choose the Hire button. The system will guide you through the hiring screens and set the Name fields as default values.
    REPORT  zrwe_fill.
    CALL FUNCTION 'HR_PREPARE_NEW_EE'
      EXPORTING
        lastname       = 'Test_Lastname'
        firstname      = 'Test_Firstname'.
    The function module us part of the standard HR component and offers many fields to preset in T752F. If you supply an existing EmployeeId the PA48 transaction will suggest you to do an organizational change when you choose the "hire" button. If you do not fill the value the system sets a dummy Id and suggests a hiring.
    The function module is RFC enabled so if you can call an RFC from your external recruitment application you can fill the T752f table. If that works and you need additional fields just copy the module and add whatever you want.
    Rgds.
    Roman

  • Error 10218 while integrating scom 2012 r2 with scvmm 2012 r2

     hello,
    We are working to integrate the SCOM 2012 R2 With SCVMM 2012 R2 .But while creating connection of integration it got failed with error in job on scvmm as below :
    Error (10218)
    Setup could not import the System Center Virtual Machine Manager Management Pack into Operations Manager server because one or more required management packs are missing. The VMM Management Packs cannot be deployed unless the following component management
    packs are present in Operations Manager :
    Windows Server Internet Information Services 2003,
    Windows Server 2008 Internet Information Services 7,
    Windows Server Internet Information Services Library,
    SQL Server Core Library.
    Recommended Action
    To provide the missing component management packs, ensure that the following management packs have been imported into Operations Manager server:
     Microsoft Windows Server 2003 Internet Information Services Management Pack for OpsMgr 2012 (version 6.0.6278.0 or later)
     Microsoft SQL Server 2005 Management Pack(version 6.0.5000.0 or later)
     You can download the management packs from the System Center Operations Manager Catalog at http://go.microsoft.com/fwlink/?LinkId=86411 
    Reference link used :-  http://technet.microsoft.com/en-us/library/hh882396.aspx ,We have imported all the required MPs as mention in above link on scom.
    Regards
    Richa KM

    Have you imported all of the packs it mentions:
    Windows Server Internet Information Services 2003,
    Windows Server 2008 Internet Information Services 7,
    Windows Server Internet Information Services Library,
    SQL Server Core Library.
    There's a good walkthrough
    here which details all the pre-reqs.
    It was some time ago but i also did a walk-through with pictures
    http://myopsmgrblog.wordpress.com/2013/04/23/scom-integration-with-scvmm/
    Hope this helps

Maybe you are looking for