Integration problem with Obssocookie

Hi Guys,
I installed following with for integration:
1) OIF IdP 10.1.4.2.0
2) OIF SP 10.1.4.2.0
3) OAM 10.1.4.2.0
4) Portal 10.1.4
5) Oracle Infrastructure Component 10.1.4.0.1
Scenario :
We have Portal authenticating to OSSO and OAM is custom to OSSO. Therefore actual authentication is done by OAM. This is working fine.
Another setup is like that user authenticates at OIF Idp, its identity is federated at OIF SP side. OIF SP side "User data store" is OAM (same used with Portal). This is also working fine.
My problem is that after federation I am redirecting the user to Portal page http://twelve.mydomain.com/portal/page/portal/TOPLEVELSITE/Welcome
which is Portal home page. But portal is not automatically authenticating user. It asks me again username/password for login to portal.
I observed using ieHttpheaders that whenever a request comes to OAM it sets Obssocookie. Can I expect the same Obssocookie (set by OAM during federation) should automatically authenticate user after redirected to Portal?
Any Pointers?
Regards
Jatin

Hi Vinod,
Thanks for reply.
Obssocookie is being sent to Portal after federation takes place. I have checked this using ieHttpheaders.
I guess federation never setsup the cookie. OAM sets up the cookie.
One more thing I observed that if I login to Portal first and later on paste the URL of OAM it doesn't ask for authentication. And works perfectly.
But in reverse case if I login to OAM first (another browser) and then paste the URL of Portal it shows login page and when I click on login link. the server throws excepton in ssoServer.log file
Mon May 26 19:04:11 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 SSOStatusServlet: Entered doGet method ...
Mon May 26 19:04:11 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 SSOStatusServlet: Entered doPost method ...
Mon May 26 19:04:11 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 SSOStatusServlet: Leaving doPost method
Mon May 26 19:04:11 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 SSOStatusServlet: Leaving doGet method
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered doGet method ...
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered doPost method ...
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 SSOLoginServlet.doPost     l_sassoToken null
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 SSOLoginServlet.doPost     l_site2psToken v1.2~47D6B77E~000444E189A4F17CBDC51A88573051ADD965B34DA2F16E9A1DF312B27A1262B010CE2DA5FCA47323653F0E21B7FD4BC8FE5FAA7635EA6F3BF777B1569B251BD87D0CEBAB161076BAF227D7B9C147AC2337B7A1378D3DF1C52CCA57ABEC139756949A3A37187D8CFE9A31FE5D1C823B0917BB58D644BFEF607F1490E6116E95385715AEA87B773489C73D787772F5A8D8496954184165665DF160410F2054F64590E9AEE425F16641E4B60FEEF5E730256024785986109DE3FC3B2A8420F38FDEFD6C70A21EDDA922DE78B6F5C7D34E37935FC166C853EEF03D2EEF4D1C3B78CB
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 URI received is: /sso/auth
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_sassoToken null
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_site2psToken v1.2~47D6B77E~000444E189A4F17CBDC51A88573051ADD965B34DA2F16E9A1DF312B27A1262B010CE2DA5FCA47323653F0E21B7FD4BC8FE5FAA7635EA6F3BF777B1569B251BD87D0CEBAB161076BAF227D7B9C147AC2337B7A1378D3DF1C52CCA57ABEC139756949A3A37187D8CFE9A31FE5D1C823B0917BB58D644BFEF607F1490E6116E95385715AEA87B773489C73D787772F5A8D8496954184165665DF160410F2054F64590E9AEE425F16641E4B60FEEF5E730256024785986109DE3FC3B2A8420F38FDEFD6C70A21EDDA922DE78B6F5C7D34E37935FC166C853EEF03D2EEF4D1C3B78CB
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Type: SSOPartner
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Auth URI = : /sso/auth
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 URI received is: /sso/auth
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_sassoToken null
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_site2psToken v1.2~47D6B77E~000444E189A4F17CBDC51A88573051ADD965B34DA2F16E9A1DF312B27A1262B010CE2DA5FCA47323653F0E21B7FD4BC8FE5FAA7635EA6F3BF777B1569B251BD87D0CEBAB161076BAF227D7B9C147AC2337B7A1378D3DF1C52CCA57ABEC139756949A3A37187D8CFE9A31FE5D1C823B0917BB58D644BFEF607F1490E6116E95385715AEA87B773489C73D787772F5A8D8496954184165665DF160410F2054F64590E9AEE425F16641E4B60FEEF5E730256024785986109DE3FC3B2A8420F38FDEFD6C70A21EDDA922DE78B6F5C7D34E37935FC166C853EEF03D2EEF4D1C3B78CB
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Type: SSOPartner
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Site ID: 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 entry: getPartnerConfiguration. p_site_id 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Decrypting partner token:
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token Version: v1.2
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token Site Id: 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token: 000444E189A4F17CBDC51A88573051ADD965B34DA2F16E9A1DF312B27A1262B010CE2DA5FCA47323653F0E21B7FD4BC8FE5FAA7635EA6F3BF777B1569B251BD87D0CEBAB161076BAF227D7B9C147AC2337B7A1378D3DF1C52CCA57ABEC139756949A3A37187D8CFE9A31FE5D1C823B0917BB58D644BFEF607F1490E6116E95385715AEA87B773489C73D787772F5A8D8496954184165665DF160410F2054F64590E9AEE425F16641E4B60FEEF5E730256024785986109DE3FC3B2A8420F38FDEFD6C70A21EDDA922DE78B6F5C7D34E37935FC166C853EEF03D2EEF4D1C3B78CB
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App Key: 65DA429FA7BE14ED
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App MaskPre: DF020AFE614B09BCE2FA403EB51575B0
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App MaskPost: 2C962379CF1AF5B1E519C58A73848110
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Decrypting early version token.
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Clear s2ptoken: hC8@g#Br<|}\Gu~HACS65WV47D6B77E~20080526190515~http%3A%2F%2Ftwelve.mydomain.com%2Fportal%2Fpls%2Fportal%2FPORTAL.home~http%3A%2F%2Ftwelve.mydomain.com%2Fportal%2Fpls%2Fportal%2FPORTAL.home~0~B5F1B4DB987BB2C47A27E4108CE94A91@
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Partner Version:v1.2
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Verifying hash for older partner token version.
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Partner application 9.0.2/9.0.4/10.1.2/10.1.4.0.1
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Site Key: 65DA429FA7BE14ED
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Requested URL: http%3A%2F%2Ftwelve.mydomain.com%2Fportal%2Fpls%2Fportal%2FPORTAL.home
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 after getPartnerConfiguration
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Calling getAuthLevel for /sso/auth
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered FilePolicyManager.getAuthLevel: authUri=/sso/auth
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 FilePolicyManager.getAuthLevel: papp success Url=http://twelve.mydomain.com/pls/portal/portal.wwsec_app_priv.process_signon
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 FilePolicyManager.getAuthLevel: pappHostPort=twelve.mydomain.com
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 No auth level found. Returning DefaultAuthLevel
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 FilePolicyManager.getAuthLevel returns 40
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Requested Auth Level: 40
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered SSOLoginServlet: :processSSOPartnerRequest method ..
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 AuthUtil: SSO Cookie received: null
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Current Auth Level: -1
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 AuthUtil: Header Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 AuthUtil: isMobileClient: false
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Site ID: 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 entry: getPartnerConfiguration. p_site_id 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Decrypting partner token:
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token Version: v1.2
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token Site Id: 47D6B77E
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Token: 000444E189A4F17CBDC51A88573051ADD965B34DA2F16E9A1DF312B27A1262B010CE2DA5FCA47323653F0E21B7FD4BC8FE5FAA7635EA6F3BF777B1569B251BD87D0CEBAB161076BAF227D7B9C147AC2337B7A1378D3DF1C52CCA57ABEC139756949A3A37187D8CFE9A31FE5D1C823B0917BB58D644BFEF607F1490E6116E95385715AEA87B773489C73D787772F5A8D8496954184165665DF160410F2054F64590E9AEE425F16641E4B60FEEF5E730256024785986109DE3FC3B2A8420F38FDEFD6C70A21EDDA922DE78B6F5C7D34E37935FC166C853EEF03D2EEF4D1C3B78CB
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App Key: 65DA429FA7BE14ED
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App MaskPre: DF020AFE614B09BCE2FA403EB51575B0
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner App MaskPost: 2C962379CF1AF5B1E519C58A73848110
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Decrypting early version token.
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Clear s2ptoken: hC8@g#Br<|}\Gu~HACS65WV47D6B77E~20080526190515~http%3A%2F%2Ftwelve.mydomain.com%2Fportal%2Fpls%2Fportal%2FPORTAL.home~http%3A%2F%2Ftwelve.mydomain.com%2Fportal%2Fpls%2Fportal%2FPORTAL.home~0~B5F1B4DB987BB2C47A27E4108CE94A91@
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Partner Version:v1.2
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Verifying hash for older partner token version.
Mon May 26 19:05:17 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Partner application 9.0.2/9.0.4/10.1.2/10.1.4.0.1
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Forced auth type: 0
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Explicit authentication required
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Calling Authentication Director
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 FilePolicyManager.getAuthClassName: retrieving plugin name for, MediumSecurity_AuthPlugin
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 FilePolicyManager.getAuthClassName: returning auth plugin name, oblix.security.ssoplugin.SSOOblixAuth
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Creating instance of auth plugin: oblix.security.ssoplugin.SSOOblixAuth...
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Creating instance of auth plugin: oblix.security.ssoplugin.SSOOblixAuth Done
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Calling Authentication method
Mon May 26 19:05:17 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Requesting Login Page to collect credentials
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 User-Agent header: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; SV1; .NET CLR 1.1.4322)
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Searching for userAgentStr : Mozilla
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 WS Request: FALSE
Mon May 26 19:05:18 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Leaving doPost method
Mon May 26 19:05:18 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Leaving doGet method
Mon May 26 19:05:18 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered doGet method ...
Mon May 26 19:05:18 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered doPost method ...
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 SSOLoginServlet.doPost     l_sassoToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 SSOLoginServlet.doPost     l_site2psToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 URI received is: /sso/auth
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_sassoToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_site2psToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Type: SSOPartner
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Auth URI = : /sso/auth
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 URI received is: /sso/auth
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_sassoToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 getAuthIntegrationType l_site2psToken null
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Partner Type: SSOPartner
Mon May 26 19:05:18 GMT+05:30 2008 [ERROR] AJPRequestHandler-ApplicationServerThread-5 No site2pstoretoken from SSO partner
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 exception before getAuthLevel
oracle.security.sso.ias904.toolkit.IPASAuthException: No site2pstoretoken from SSO partner
     at oracle.security.sso.server.auth.AuthDirector.getAuthLevel(AuthDirector.java:206)
     at oracle.security.sso.server.ui.SSOLoginServlet.doPost(SSOLoginServlet.java:480)
     at oracle.security.sso.server.ui.SSOLoginServlet.doGet(SSOLoginServlet.java:333)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:826)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:332)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
Mon May 26 19:05:18 GMT+05:30 2008 [DEBUG] AJPRequestHandler-ApplicationServerThread-5 Calling getAuthLevel for /sso/auth
Mon May 26 19:05:18 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Entered FilePolicyManager.getAuthLevel: authUri=/sso/auth
Mon May 26 19:05:25 GMT+05:30 2008 [ERROR] AJPRequestHandler-ApplicationServerThread-5 Unexpected Exception received
java.lang.NullPointerException
     at oracle.security.sso.server.policy.FilePolicyManager.getAuthLevel(FilePolicyManager.java:396)
     at oracle.security.sso.server.auth.AuthDirector.getAuthLevel(AuthDirector.java:234)
     at oracle.security.sso.server.ui.SSOLoginServlet.doPost(SSOLoginServlet.java:480)
     at oracle.security.sso.server.ui.SSOLoginServlet.doGet(SSOLoginServlet.java:333)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:826)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:332)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
Mon May 26 19:05:26 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Leaving doPost method
Mon May 26 19:05:26 GMT+05:30 2008 [INFO] AJPRequestHandler-ApplicationServerThread-5 Leaving doGet method
Regards
Jatin

Similar Messages

WDK 8.1 update download issue and integration problem with VS Express 2013

I have VS Express 2013 in my machine and want to download the WDK 8.1 Update. However, I am facing two issues:
1. The download site says : "You have to register for downloading. Click on continue to register and download". On doing so it asks for what I want to download. Then it redirects to the page saying "Thank You for downloading". However,
it has been more than 10 times since yesterday and yet no file has popped up for download. It is the same problem with other machines.
2. On installing WDK 8.1 from softonic, it has created a separate folder and shows no way for its integration with VS express 2013. I do not get any "Windows driver functionalities" in VS Express 2013.
Could somebody point me where I am wrong.
Thank You in advance

Hi codeahead,
About this (1) issue, could you please tell me where you download the WDK 8.1 Update?
Generally, I know that we can download the WDK 8.1 Update from the following Microsoft Official site.
http://www.microsoft.com/en-us/download/details.aspx?id=42273
So please you check if you download the WDK 8.1 Update from the above link.
(1) If no, please try to download this WDK 8.1 Update from the above link check this issue.
(2) If yes, could you please tell me if you register a life user account from this Microsoft?
Generally, I know that when we download some software from this Microsoft site, we will need to register a life user account.
So please check if you have a life user account from this Microsoft site.
However, as you said about the (2) issue. Since it is related to install the WDK 8.1 with VS2013 Express. Since I am not the VS Install experts, so I suggest you can post this issue directly to this VS Install forum:https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup
, you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Office Integration: Problems with MS Word

Hi all,
I have a problem with word integration in SAP CRM 7.0 EhP1 SP04.
I have created, activated and populated a web service and created a word template. When creating a new document in the WebUI (button "With Template") Microsoft Word not even starts. However, the Word document based on the template was enriched with data via the web service and is available in the assignment block "Documents". When I click on the link and open the document I can make changes, but then I only can save it local and have no possibility to save it at the content server which usually should be done automatically. When I use the button "Edit" in the document details page word will not start.
All prerequisites mentioned in different sap notes and forum threads (active services in sicf, alias for content management, browser settings, ...) are completed.
Has anyone had similar experiences or has ideas for a possible solution why word will not start when using the edit button?
Do I have do make any additional settings concerning content management?
Thanks in advance!
Sebastian
Edited by: Sebastian Lenz on Oct 19, 2011 5:07 PM

Hi Andrei,
Thank you very much for your quick response and your suggested SAP notes.
With the help of note [1566793 'Procedure to create word template in EHP1 & higher versions'|https://service.sap.com/sap/support/notes/1566793] I was able to successfully create a template that is filled with data from our web service. Because we have already installed SP04 the corrections mentioned in note [1459264 'Microsoft Word does not open in CRM Template Designer'|https://service.sap.com/sap/support/notes/1459264] are implemented as well.
I would be very grateful if you could suggest any more possible solutions.
Or means "For security reasons, Microsoft Word can no longer open the document and write it back to the CRM server using the save function." it is absolutely impossible to edit a Word document, that alreay exists on the content server, and save it as new version?
Appreciating your help very much,
Sebastian
Edited by: Sebastian Lenz on Oct 20, 2011 8:44 AM

Account integration problem with ECC 6.0

Hi
We have using PPM 5.0 system with ECC 6.0 system (No EHP). Problem we are facing is we are not able to created the PS project automatically.
I have done already all the necessary settings and in manual case it working fine it seems. I eager to know any suggestions on this to resolve, to achieve automatic creation of project.
Do you feel there is any issue with EHP?
Regards,
Pramod

Hi Pramod,
Refer to the note 1427365 for details. The pre-requisite for PS integration is as below:
SAP Portfolio and Project Management 5.0 SP02
and
SAP ERP 6.0 SP 17
or
SAP ERP 6.0 EhP2 SP07
or
SAP ERP 6.0 EhP3 SP06
or
SAP ERP 6.0 EhP4 SP06
or
SAP ERP 6.0 EnhP5
Regards
Amit

SOAP API integration problem with OIM 11g R1

Hi,
We're facing a problem when we are attempting to provision for a third party Web Service application in OIM 11g R1.
During development and test running in an IDE environment, JDeveloper, the soap wsdl requests are triggered and a response is received successfully. However, when we shift the work and integrate it with OIM using design console, there seems to be an error indicating an invalid wsdl location. We have used the super class Exception, in try-catch block for handling of the exceptions. Please see the log message.
Xl Home Dir :/oracle/Middleware/Oracle_IDM1/server
Running CREATEUSERTASK
Target Class = org.identityconnectors.Provisioning.QuickShareUserProvisioning
URL : XXXXX
User ID : XXXX
Password : XXXX
ERROR: Invalid wsdl location robi/XXXX_saved_wsdl.wsdl
When we simply run the jar file from the command line, it gives us, java.lang.NoClassDefFoundError: javax/xml/rpc/Service
[oracle@idmlab JavaTasks]$ java -jar archive1.jar
URL : XXXXX
User ID : XXXX
Password : XXXX
Exception in thread "main" java.lang.NoClassDefFoundError: javax/xml/rpc/Service
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)
at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
at java.net.URLClassLoader.access$000(URLClassLoader.java:58)
at java.net.URLClassLoader$1.run(URLClassLoader.java:197)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at org.identityconnectors.Provisioning.QuickShareUserProvisioning.createUser(QuickShareUserProvisioning.java:41)
at org.identityconnectors.Provisioning.QuickShareUserProvisioning.main(QuickShareUserProvisioning.java:215)
Caused by: java.lang.ClassNotFoundException: javax.xml.rpc.Service
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
... 14 more
Any help or suggestion, appreciated!
Thanks
Tamim Khan

Hi Kevin,
Thanks a lot for the response. But, when i deployed the composite SAR in to the server from Jdeveloper, i checked the option to "Overwrite any existing composite with same revision ID". SO, i used the same revision ID (Say 1.0), will this also need to be disabled?
Thanks,
Srini

WLP 9.2.3 integration problem with ALDSP 2.5

HI,
I am having the following issue when using WLP 9.2.3 and ALDSP 2.5 on WebLogic 8.1.
We have recently upgraded from WLP 9.2.1 to WLP 9.2.3,
We were initially getting this error,
following error observed if accessed via application or a standalone test case.
context :: javax.naming.InitialContext
com.bea.dsp.dsmediator.client.exception.SDOMediatorException: weblogic.rjvm.PeerGoneException: ; nested exception is:
java.io.EOFException
at com.bea.dsp.dsmediator.client.XmlDataServiceBase.invokeFunction(XmlDataServiceBase.java:322)
at authenticationdataservices.logical.FirmUser.getFirmUserId(FirmUser.java:98)
at src.AuthenticationUtil.main(AuthenticationUtil.java:27)
Caused by: weblogic.rjvm.PeerGoneException: ; nested exception is:
java.io.EOFException
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:215)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:338)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
at com.bea.ld.Server_ydm4ie_EOImpl_816_WLStub.executeFunction(Unknown Source)
at com.bea.dsp.dsmediator.client.XmlDataServiceBase.invokeFunction(XmlDataServiceBase.java:312)
... 2 more
Caused by: java.io.EOFException
at weblogic.rjvm.t3.MuxableSocketT3.endOfStream(MuxableSocketT3.java:383)
at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:737)
at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:684)
at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:845)
at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:792)
at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:283)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
To overcome this issue we have read this [ information |http://download.oracle.com/docs/cd/E13167_01/aldsp/docs25/appdev/intro.html] and have done the required.
Re: ALDSP 2.1 QName problem
To enable interop from 9.x client to DSP 2.1 server, follow the following steps.
1. Put ${WL_HOME}/liquiddata/lib/wls90interop.jar in PRE_CLASSPATH on
2.1 server by editing setDomainEnv.cmd
2. Put ${WL_HOME}/liquiddata/lib/wls90interop.jar in workshop's classpath
by modifying -cp key's value in Workshop.cfg
3. Build the application inside the workshop.
4. Build the client side jar using ${WL_HOME}/liquiddata/bin/ld_clientapi.xml
with following arguments on the command line:
-Dapproot=<application directory>
-Dxbeanjarpath=${WEBLOGIC9x}/server/lib/xbean.jar
5. Copy ${WL_HOME}/liquiddata/lib/wlsdo90interop.jar, ld-client.jar and
<appName>-ld-client.jar in WEB-INF/lib or classpath of the 9.x side.
Since network classloading is turned off in any WebLogic server, we need to copy wlsdo.jar and ld-client.jar on the client side.
Also added the flag -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 on the startup of the server (JDK 1.50_12 which is used WLP 9.2.3). We also downgraded the JVM version (JDK 1.5.0_06) for WLP server (as explained in the BUG to JDK 1.5.0_06.)
Now we are getting another issue:
Here is the exception observed:
com.bea.control.servicecontrol.util.memento.ServiceClassMementoUtil> <000000> <com.bea.control.servicecontrol.util.memento.ServiceClassMementoUtil: Cou
ld not load the ServiceClassMemento from the following resource file: uk/gov/fsa/mer/csadminservice/servicecontrol/AdministrationServiceControlServiceClassMemento.ser. This is probably due to a v
ersioning issue and if the developer was astute when they made the change then this should not be the reason. Another possibility is that this resource has become corrupt. The good news is a reb
uild of your app should fix it.
Throwable: java.io.InvalidClassException: javax.xml.namespace.QName; local class incompatible: stream classdesc serialVersionUID = -9120448754896609940, local class serialVersionUID = 4418622981026545151
Stack Trace:
java.io.InvalidClassException: javax.xml.namespace.QName; local class incompatible: stream classdesc serialVersionUID = -9120448754896609940, local class serialVersionUID = 4418622981026545151
at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:519)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1546)
at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1460)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1693)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:339)
at java.util.HashMap.readObject(HashMap.java:1012)
at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:919)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1813)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1713)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)
Please advice on how to overcome this issue.
Your attention to this issue will be highly appreciated.
Regards,
Edited by: user738507 on Jan 6, 2011 12:46 PM

I don't know what the .ser file is that it is complaining about, but if it contains an (old) serialized QName object, you'll get that exception on an attempt to de-serialize it into a new QName object. Did you try rebuilding your app like the error message suggests?
You can also try :
@ Also, In 1.5 JDK, the javax.xml.namespace.QName class is bundled in
@ jre/lib/rt.jar. If you have to replace that in your classpath, you should be
@ pre-pending the wls90interop.jar to the bootClasspath.
@ For eg, in my wls9.2, i set the classpath as follows:
@ -Xbootclasspath/p:D:/releases/81sp5platform/weblogic81/liquiddata/lib/wls90int
@ erop.jar

Teaming Groupwise integration problem with workspaces

Hello volks,
i just made the teaming groupwise integration on a testsystem. the integration works fine, i can see my personal workspace and the team workspaces, i am assigned to. but now, i want to see the global workspace and the personal workspaces too, but i can't find any function to activate or anything like that.
The access rights to the workspaces are set correctly, from the website i can access them, but groupwise doesn't show them.
So, does anyone have a glue about this?
Thanks for help.
Greets Patrick

ulerius,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Crystal Report Integration Problem with VS 2012 Ultimate

I installed Crystal Report (Support Pack 13 v.13.0.13.1597) for VS 2012 Ultimate. When I create a crystal report, the Crystal Reports Gallery didn't pop up. Instead it just jump to *.rpt file and shows one hell of a hex codes
Did anyone faced the same issue, like mine?
Pliz, help me out.

Hi MisterEpic,
Welcome to the MSDN forum!
First,
I recommend you verify the ISO checksum for Visual studio 2012. You can download the File Checksum Integrity Verifier (fciv.exe) described at
following locations.
http://support.microsoft.com/kb/841290/en-us
The CRC and SHA1 hash values of the ISO should match these:
CRC: 68068922
SHA-1: 4F1E90E5FDE85AD636233A812A140E89E11A7DEA
Detail from:
http://www.microsoft.com/en-in/download/details.aspx?id=30678
Then, you can use the .NET Framework Setup Verification Tool to verify the installation state of one or more versions of the .NET Framework
Download from :
http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-99-90-04/netfx_5F00_setupverifier_5F00_new.zip
If the verification tool finds any issues, there is a .NET Framework Repair Tool that can be found at the following locations:
http://support.microsoft.com/kb/2698555
More information is in the blog at the following locations.
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx
Best regards.
Samson sun
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

SSO Integration problem with Java version in 10g

Hi,
I'm following the instructions to integrate my HTML DB with 9iAS 9.0.2 SSO. The instructions tell me to download the SSO PDK and extract the file SSOHash.class then load it into my FLOWS_xxxx schema. My database version is 10g, and the loadjava fails with the following message:
Error while testing for existence of dbms_java.handleMd5
ORA-03113: end-of-file on communication channel
The reason is that the function handleMD5 is no longer in the dbms_java package in 10g, it is in this package in 9i. Has anyone got a workaround to this?
Thanks,
Steve

Scott,
Actually I'm wrong about the function not being there, it is. But someone else is having the same issue, please look here:
loadjava hangs
Steve

Data Integrator Problem with the profiles of the "Security Manager" module.

Hi!!!,
I wanted to be able to obtain a profile that do not eliminate anything in the “Topology Manager” module. I duplicated de original “TOPOLOGY ADMIN” profile and for each object I removed the “delete” method.
That with the purpose of the user that has to asigned this profile can not delete anything of this module. The option delete is disabled, but when the user made clic in the trash can icon or he types ENTER, he can delete only the master repository.
I do not if this is because some update, I´m use 10.1.3.5 ODI version.
Can somebody helpme please???.
Thanks.
Edited by: 807694 on 5/01/2011 11:07 AM

Hi,
For BI 7 data source, you need transport active version from BW development to quality. So the procss is
1. Transport data source in source system
2. Replicate data source in BI system.
3. Transport active version of data source from BI system.
4. Transport other objects.
5. Load data till PSA.
6. Load DTP from PSA to data target.
Regards,
Pravin

JBoss 3.2.1 integration problem with Toplink 9.0.3

hi, there
it seems that the XML parser of Toplink 9.0.3 not happy with that of JBoss 3.2.1, when we try to build the toplink
SessionManager.getManager().getSession(...)
call
1) if i did not let Xerces.jar (1.4.4) in, it complaints the missing class
org/apache/xerces/framework/XMLParser
2) if i put Xerces.jar in classpath, it throws
java.lang.VerifyError: (class: oracle/toplink/tools/sessionconfiguration/XMLLoader, method: retreiveDOM signature: (Ljava/lang/ClassLoader;)Lorg/w3c/dom/Document;) Incompatible object argument for function call
any ideas of the work-around???
appreciated!!!
zhuoer
[email protected]

see Tomcat?

VL060 integration problem with WM

If accessing VL06O the outbound delivery monitor and I attempt to create a WM transfer order for a delivery either with the foreground button or from the menu (Subsequent functions-> create transfer order) SAP appears to create the transfer order, as it appears in the delivery document flow. However if I try and view the transfer order with LT21 (display TO) the transfer order does not exist.
I can create the transfer order successfully from within the Delivery transaction (VL02N) but not the Delivery monitor (VL06O).
We're still on 46C patch level 47.
Am I missing something please to create the TO?
Regards

If accessing VL06O the outbound delivery monitor and I attempt to create a WM transfer order for a delivery either with the foreground button or from the menu (Subsequent functions-> create transfer order) SAP appears to create the transfer order, as it appears in the delivery document flow. However if I try and view the transfer order with LT21 (display TO) the transfer order does not exist.
I can create the transfer order successfully from within the Delivery transaction (VL02N) but not the Delivery monitor (VL06O).
We're still on 46C patch level 47.
Am I missing something please to create the TO?
Regards

Sitestudio integration problem with ucm10gR3

hi
we are install ucm 10gr3 s/w done successfully, but when we are trying to integrate with sitestudio verson (10gr4[10.1.4.5.0]) we geting a error
Failed to get search results with query "Fragment".
(csSSUnableToRetrieveSearchResults Unable to retrieve search results. Unable to create result set for query 'SELECT IdcColl1.dID, dDocName, dDocTitle, dDocType, dRevisionID, dSecurityGroup, dDocAuthor, dDocAccount, dRevLabel, dFormat, dOriginalName, dExtension, dWebExtension, dInDate, dOutDate,  dPublishType, dRendition1, dRendition2, VaultFileSize, WebFileSize, URL, dFullTextFormat, dFullTextCharset, DocMeta.*
          FROM IdcColl1, DocMeta
          WHERE IdcColl1.dID=DocMeta.dID AND ((xWebsiteObjectType LIKE 'Fragment')) ORDER BY dInDate DESC'. ORA-00942: table or view does not exist
can any one slove this one thank you in advance

hi
as per your direction we create a table with IdcColl1 and kepted all fileds (like dId,dDocName.dDocTitle,dDocType) in table and add those details to view form Adminstartion-->Admin applets --> confugaration manager -->then tbles,view tabs for this error
but it throughing same error
Failed to get search results with query "Fragment".
(csSSUnableToRetrieveSearchResults Unable to retrieve search results. Unable to create result set for query 'SELECT IdcColl1.dID, dDocName, dDocTitle, dDocType, dRevisionID, dSecurityGroup, dDocAuthor, dDocAccount, dRevLabel, dFormat, dOriginalName, dExtension, dWebExtension, dInDate, dOutDate,  dPublishType, dRendition1, dRendition2, VaultFileSize, WebFileSize, URL, dFullTextFormat, dFullTextCharset, DocMeta.*
          FROM IdcColl1, DocMeta
          WHERE IdcColl1.dID=DocMeta.dID AND ((xWebsiteObjectType LIKE 'Fragment')) ORDER BY dInDate DESC'. ORA-00942: table or view does not exist
please direct us
Thank you,
linesh & jagan.
Edited by: 862858 on Jun 7, 2011 3:00 AM

Has anyone solved the car integration problem with iOS8?

iOS8 broke my car radio's ability to control my iPhone to play music. I use USB, but many people in this community also suffered this over Bluetooth.
Resetting network settings, or installing an iOS update, will make it work once or twice (connecting to the car) but not more.
Has anyone figured out a permanent fix?
Does Apple acknowledge this bug?

Afraid start up is still rough. Even more button pressing required to access. Some apps still reluctant to open. Either slow or simply won't open.
THanks for your comments.

Problem in starting Integration service with DAC 11g

Hi friends,
Im @ the step of registering integration service and the repository service in DAC 11g. I can start the Repository service well in DAC, but facing issue in starting integration service with DAC, while trying to test connection im getting a message like
Failure connecting to BIA_IS!
Im not sure the reason to this problem in DAC. I have also setted the necessary environment variables like INFA_HOME and INFA_DOMAINS_FILE referring the domains.infa file like
INFA_DOMAINS_FILE = C:\Informatica\9.1.0\domains.infa
Also checked with the dac_env file which has the below contents
REM -----------------------------------------------------
REM
REM ENVIRONMENT VARIABLES THAT YOU MAY NEED TO SET FOR
REM PROPER INFORMATICA 8.x or 9.x HANDSHAKE.
REM
REM INFORMATICA_SERVER_LOCATION denotes installation of
REM Informatica components. Example:
REM C:\Informatica\PowerCenter9.1
REM
REM DOMAINS.INFA_FILE_LOCATION denotes the location
REM (including name) of domains.infa file
REM
REM Please make sure to set correct values for variables
REM mentioned above
REM
REM -----------------------------------------------------
set INFORMATICA_SERVER_LOCATION="C:\Informatica\9.1.0"
set DOMAINS_INFA_FILE_LOCATION=C:\Informatica\9.1.0\domains.infa
set INFA_CMD_STYLE=8
set PATH=C:\Informatica\9.1.0\server\bin;%PATH%
set INFA_DOMAINS_FILE=%DOMAINS_INFA_FILE_LOCATION%
What could be the problem and where to check with the logfile related to the integration service failure in DAC.
Thanks in advance.
Regards,
Saro

Hi guys,
The issue is sorted out. The below are the two precautions to be considered.
*) Make sure of INFA_HOME/Server/bin exist @ the end in the PATH variable.
*) For each and every change in the PATH variable, it is better to restart the services(both infa and DAC) then and there for the changes to take effect.
Regards,
Saro

Integration problem with Obssocookie

Similar Messages

Maybe you are looking for