Integration Process - Graphical Definition

Hi,
I am trying to use the Graphical Definition inside Integration Process but the panel is blank. The Correlation Editor and BPEL4WS work fine. Some say it has to do with the java version but some say its another problem. Can anybody help?
My java version is: 1.4.2_15
Reward All Helpfull Answers

Hi,
The panels are applet pannels. Check your webstat version. disable proxy settings. Westat load all your sceens into your local machine. I think it might be the problem. Try by disabling the proxy settings in lan settings tab.
Thanks,
RamuV

Similar Messages

Integration Process exception handling & alerts, Java

Hello,
I would like to enhance my basic scenarios fool proof and with as much Java as possible.
I have set up several asynchronous and synchronous File to SOAP transfers between systems A and B
using PI70 including my own Java mapping classes and PI's AF_Modules beans. They work just fine.
I have not designed my own Integration Processes yet, so execution is based on channel settings and availability timing.
I have learned this aproach may be exposed to general faults resulting manual monitoring and repairing.
For example server problems at receiver side can result data losses as sender channel just keeps removing source
files like normally, as the process would be better to just stop right there and alert or something.
My question is, is the "Enterprise services Builders" Integration Process & Graphical definition screen the one and only tool to
customize whole process exception handling and alerts in PI, and Java is not an option?
Appreciate your advice on this.
Kind regards m

Hi m,
Strange Name
>>I have learned this aproach may be exposed to general faults resulting manual monitoring and repairing. For example server problems at receiver side can result data losses as sender channel just keeps removing source files like normally, as the process would be better to just stop right there and alert or something.
If you are looking to handle this particular scenario, then we have the alert mechanism and CCMS monitoring. There you will come to know whether the end system down or not.
Also in addition to this you can write your own java (in message mapping, as modules, java mapping) /abap code (as abap mapping, user exit in standard functions etc) for providing more details in error scenarios. But you need to validate whether the maintenance/development cost for the code is justified in your scenarios
Regards
Suraj

Integration of new BPM (NWDS EHP1) and Solution Manager process graphics

Hi Experts,
we are trying to use Solution Manager for our client's process documentation. Now, Solution Manager generates a graphic which unfortunately is almost unusable (no lanes, no transaction link, just visio-like graphic). Even the old ASAP 4.6C graphic tool was better and more interactive.
On the other hand the new BPM in NW Developer Studio EHP1 Composition Environment seems to provide a perfect graphical tool for process modeling and documentation.
Does anybody know if there is a (future?) possibility to integrate these two tools?
As an alternative, does anybody have an idea how to get better Solution Manager process graphics?
Michael Meissner

I also digged a little into this topic since I was wondering about the different modeling techniques SAP currently provides and how they will be integrated in the future.
[This|http://www.feedingthesapecosystem.com/2009/05/sapphire-09-part-ii-high-stakes-of.html] great blog entry about NW BPM also includes some comments about the future vision of integration between NW BPM and SolMan. It looks like in NW BPM 7.2 (planned for end of the year) there will be a "read-only" integration with SolMan processes while in the future there will be a bidirectional integration which means that BPM can import SolMan processes, enhance them and again export the models to SolMan. This is a great step further to the Common Process Layer SAP is referring in the [BPM Roadmap document|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/003cf0a1-e8fa-2a10-7db5-ba245a663d9f&overridelayout=true].
Cheers,
Mane

Cannot Activate the Integration Process

Hi Friend,
File Merging:
==========
I wonder why the receiver step not taking the " Use Correlation" or "Activate Correlation" value even after creating the correlation list and check(F7) the same.
At receivers step in Graphical Definition(BPM) I can see the red question mark against Activate correlation value, I can see the value to choose. But when I choose the value and save the value does not stay there it disappears.
I feel that the correlation list value is not been activated and hence unable to use it for the receivers steps.
When I activate the Integration Process, below is the error message appears.
Activation of the change list canceled
Check result for *Integration Process kanchuBPM_IS | http://kanchuBPM_merge.com: *
Step does not use any correlations
Step does not use any correlations
One more information:
Used steps in BPM....
Fork : Fork1
Receive: Receive1
Receive: Receive2
Transformation: Transformation1
Send: Send1
Here the problem is at Receive1 and Receive2 steps. - Unable to choose the correlation value created.
Regards,
Venkat Ramana K.
Edited by: Venkat on Dec 9, 2008 3:09 PM

Hey Carlos,
Did the SXMB_MONI and IP.
Got th ebelow error message:
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Unable to figure out what could be the problem..
Please help me and guide me in detail to clear th error .
Regards,
Thank you.

Integration Process Functions

Hello all,
Some functions withing the Graphical Definition of an Integration Process are not clear to me. Can some explain what the following functions do:
- Switch
- Control
- Block
- Fork
Hope someone can help me out.
Thnx!

hai
go through the sap help link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/81/756c927b54dd4c98d3d2f832b54de1/frameset.htm
it will give u an clear idea
regards
rose.

Changes to Integration Process not reflected at runtime.

I have changed an Integration Process (eg removed a loop) and then activated this in IR and ensured that RunTime Cache is refreshed - I even forced another Run Time Cache refresh via SXI_CACHE.
however the Process is still running under the old version (I can see this from SXMB_MONI_BPE and drilling down into the workflow graphic).
How do I get XI to run the next time with the new version of my process ?

I think you will get an answer sooner when you post in the XI forum which you can find[here.|Process Integration (PI) & SOA Middleware;
Regards,
Martin
Edited by: Martin Nooteboom on Apr 18, 2008 1:20 PM

Question on BPM Integration Process

Hello Experts,
I am following this BPM article which is very similar to what I want to do.
We are using PI 7.1 without EP1.
I have an XML to IDoc scenario where my XML's external definition resides in a seperate SCV (SCV1) and my imported IDoc resides in a seperate SCV (SCV2). We did this to follow the Sender-Mapper-Receiver model. We have a different SCV for Mapping which holds MM and OM (SCV3). Now, I have my Abstract Service Interfaces for external definition in SCV1 and abstract interface for IDoc in SCV2. And, Integration Process in SCV1 (no good reason). But, now I am not able to access SCV2 abstract interfaces (IDoc abs) in my Integration Process since it sits in SCV1. I am thinking if I have to crate my external definitions, idoc, abstract service interfaces, MM, OM and Ingtration Process in one SCV instead of having them in three different SCVs. I was trying to follow sender-mapper-reciever model but seems like for BPM you need to have all your stuff in one SCV. Please help if you know how to resolve this issue wiithout getting rid of sender-mapper-receiver concept.
Thank you in advance for your help.
- Mayur

Thanks Jose. I think creating dependencies is a away to go. I also found this this where Stefan suggested same thing.
So, now Sender (SCV1) and Receiver (SCV3) have been added under Mapper (SCV2)'s dependencies list and I will have my BPM Integration Process in the SCV2 which will give me access to both sender and receiver abstract service interfaces.
Re: Software Component Dependencies PI 7.1
Thanks,
Mayur

Integration Process w/ return code 99

Have a very weird situation with an integration process. In our development environment, in SXI_CACHE, it returns a return code of 99 signalling some type of error. The weird problem is that the process works just fine. It's an IDOC to flat file scenario and the flat file gets generated each time perfectly. This is with the process status of 99 in SXI_CACHE.
However, when the process is moved to QA, it does not work at all. The messages get stuck in SXMB_MONI with message "message has error on outbd. side". When I click on the PE to view the error, it appears the workflow behind the process is defined incorrectly becasuse in the event trace I see:
Workflow definition of task 'WS90100009' cannot be activated.
The reason for this error is
Container element '_CRL_I001ZMTRLNO_0025' not available
What is killing me is that this same error occurs in our development environment, yet the process still works fine.
Can someone possible explain what the container error might mean and how to fix? The workflow never gets kicked off because the definition is not active.
Thanks

all green in that transaction...
in the process, i have two branches.. one to receive a MATMAS the other to receive a ZCLFMAS IDOC....
a file gets generated when any of the following conditions occur
- both IDOC's are received for the same material
- only MATMAS or ZCLFMAS are received and the other message type is not received within 3 minutes... we have time controls on the two branches
the error is in the initial receive step...keeps saying that container element is not available yet I have no idea what that means

Correlate MDN to AS2 message using an integration process

Hello,
I had a similar question in a previous thread but closed it as the problem might have not been to clear.
Problem is that we have to use BPM for an AS2 scenario and correlate the MDN back to the process as we need BPM functionalities such as error handling and time-outs as well as some data enrichment.
Problem is even when I request the MDN synchronously on Adapter Level it is delivered as asynchronous message back. So I need to figure out how to correlate it.
MDN contains the messageID so I tried to use the messageID of the original message as correlation. However problem is that a new message ID is assigned when the message is sent by the integration process and the second on is used then as ID in the MDN.
It seems to me that it is therefore not possible at alle to correlate the MDN? However this is a definitive requirement so I am really stuck at the moment.
Do you have any idea?
Thank you very much!

Hello,
well, actually the correlation itself would work as I extract the messageID in a transformation step and then activate the correlation in a send step.
If I check the flag "Refer MDN to XI" in AS2 receiver channel the MDN is delivered back to the integration server and the original messageID is then part of the MDN message payload.
However, and that is the big problem, the MDN uses the second messageID that is created when sending the message from the integration process (and not the first one when the message is sent from sender and process by the integration process).

Internal error: Link from Integration Process

Hello,
i´ve got a big problem with a process in PI 7.1
When I try to save my process I get this Error Message:
Internal error: Link from Integration Process IP_ASSET_EXCHANGE | http://hiddennamespace.com to object type "ifmextmes" with role "d77b01873ae811de8f28000c294f2f80" is not permitted
For my Abstract interfaces I use External Definitions.
Does anyone has a tip?
Thnx,
Rgds,
Steffen

Hi!
I have same problem.
Have you decided this issue?
Thnx,
Serg

PI 7.1 Integration Process Error

Hi,
I am trying to configure a BPM scenario on our 7.1 system. I tried 2-3 different scenarios but always get the same error.
For example after the file is picked up and sent to the Integration Process it doesn't continue. I researched and I find always the same error. The message get stuck in qRFC (inbound Queue) with the error "Permanent error in BPE inbound processing". When I display the Trace I always get this error:
Error during start of process of type WS90000001 by message XXX
Class Attributes CL_SWF_XI_INBOUND For Message XXX
Anyone knows what exactly this error means?
ESR
My Integration Process:
1. Receive Step:
Mode: Asynch.
Message: ContainerA (Abstract, Asynch. Interface)
2. Send Step:
Mode: Asynch.
Message: Container B (Abstract, Asynch. Interface)
Process Integration Scenario:
http://picasaweb.google.com/arman.eker/DropBox?authkey=Gv1sRgCPX586Kaq4CFsQE&pli=1&gsessionid=x7hKm0rn3TYwR49UD6YRaA#5358012257900568274
Thanks for your help.
Arman

Open SXMB_MONI ---> Check the processing entry for your BPM ---> click on PE and open the graphic workflow....this will tell you where the BPM fails....
Since you are getting the same error for all your BPMs perform the below generic checks:
1) Sender and receiver MIs match....have the required MTs and mode
2) In SXI_CACHE check the return code of your BPM...ensure that it is 0....if anything other than 0 then perform activation (click on the match-stick symbol)
3) From tcode SWWL remove the errored entries for your BPM....
Regards,
Abhishek.

Integration Processes within Integration Scenario

The process I need to model is as follows:
SRM XML PO => OAG XML PO => Embeded OAG XML PO in another message.
I have looked at trying to use an integration process to handle the first conversion and then a regular interface mapping for the 2nd. However despite creating the Integration process in the same software component as the Integration Scenario I get nothing in the drop down list when searching for the Integration process in the Application Component definition. Even if I try to create a new integration process from within the Application component I get an error saying that the SCV of the integration process and the SCV of the Application component are not the same
Does any one have any suggestions

Hi Rajasekar,
       Hope u do fine.
   Ur not mentioned any of ur requirement.
   In BPM scenarios only we can create the INTEGRATION PROCESS.
   In REPOISTERY--> we can design the INTEGRATION PROCESS.
   In DIRECTORY--> Service can installed the Directory.
Regards,
sateesh N.

Integration Process single steps?

Hello everybody,
asuming I have a WSDL-File with
a) one request message
b) one response message.
Can anybody tell the steps to use this external definition in a synchronous SEND step in an integration process?
What to do first, next an so on?
Thanks a lot
Regards Mario

Hi Mario,
You can use the wsdl file which is defined as an external definition to create the message interfaces, since ur using bpm, it would be an abstract interface. The rest of the steps would be the same, refer this link on how to do that:
http://help.sap.com/saphelp_nw04/helpdata/en/43/6211331c895f6ce10000000a1553f6/frameset.htm
regards,
Chandra

Integration Process Doubts

Hello everyone,
I have the next scenario requirement:
Informix -> XI -> R/3
but the answer from the R/3 BAPI has to be evaluated to send an email in case of error and to update some rows in Informix database, the query in the sender jdbc is a JOIN from several tables, so my doubt is as follows, I could obtain 'n' rows from Informix in the same structure, but they need to be processed in R/3 in pairs, one field is the difference in this pair some 210 and 212 values, so I need to send to the ABAP Server Proxy two rows one with 210 and one with 212, how can I divide this rows in XI in my Integration Process????, or is there a way to configure the sender communication channel to restrict the query for two rows so every message taken via JDBC are going to be the exactly quantity of rows I need in this case two, thanks in advance for your answers.
Regards,
Julio Cesar

>> how can I divide this rows in XI in my Integration Process????,
I m not really sure about your actual scenario but if you are looking to club together values based upon some key,you can easily do that in message mapping by using formatByExample standard function.
Please have a look at the below blog to see its functionality.
New functions in the Graphical Mapping Tool XI 3.0 SP13

Problem with Integration Process

Hi all,
I have a problem within a Integration Process.
I created a loop with help of a local integer element.
On the development system it was running without any issued. But on the productive machine the Integration process runs until he has to increase my local element by one.
The system is raising the following error message. (Within the graphical BPM log / Process Engine)
Expression ''1'{TYPE=SWFXST_INTEGER}' does not correspond to data type () of element
In general I understand the error message. The Integer expression 1 (should increase variable by one) is the wrong
data type.
But I am not able to understand why it is running on the development system but not on the productive system.
I already compared the main configuration settings for BPM between development and production but the settings are equal.
Do you have any ideas about such a problem. Ideas about additional logs ...
cheers,
Stefan

Hi,
Your container operation is perfect. there is no iisue with assigning valuee to counter
I am telling about the condition in Loop step
in BPM loop step you need to provide a condition . its basically a while loop.
i guess you are providing condition based on Counter element
What are you putting there as loop condition? Please check that one.

Integration Process - Graphical Definition

Similar Messages

Maybe you are looking for