Integration Repository not registering in SLD
I have had a server released to me for final config, (PI7.0 SP10) but I am having some errors during final config/post installation steps.
There errors are:
#10 13:24:04 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.BaseRuntimeException
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository
I have checked the ExchangeProfile, SLD, Users are not lcoked. I have looked into rep/support/public/index.html Log
407 12:54:13 [SAPEngine_Application_Thread[impl:3]_188] ERROR com.sap.aii.ib.core.util.AbstractWebUtils: Internal error: Could not find SLD name for XI Application "RWB"
Thrown:
MESSAGE ID: com.sap.aii.ib.bom.landscape.rb_landscape.SLD_***_NOT_FOUND_EX
com.sap.aii.ib.bom.landscape.SLDElementNotFoundException: Unable to find an associated SLD element (source element: SAP_XIIntegrationRepository, [CreationClassName, SAP_XIIntegrationRepository, string, Name, repository.xib.vpsddbvirt, string], target element type: SAP_XIIntegrationServer)
Basically, the Integration repository will not register in the SLD.
Any ideas? I have run SXI_CACHE, and /CPACache/refresh?mode=full but this hasn't helped. I have asked Basis to check all Applications are running in Deploy in the Java Visual ADmin.
Everything appears to have registered correctly. I am loathe to use OSS Note 764176 as this is a Major component.
> Hi,
>
> Have you mentioned the necessary parameters for the
> IR in Exchange Profile?
>
> Regards,
> Kumar
I have only mentioned that I have checked them - and by that I mean compared to Test and Dev (with the domain changing for different servers)
Similar Messages
-
Integration Repository - Not starting up
Hi All
I am new to SAP XI . We have recently Installed Netweaver 2004s . When we are trying to open Integration Repository from 'Exchange Infrastructure Tools' it tries to open '"SAPj2eeclient.jar" or "repository.jnlp" through http://prosindia:50100/rep/repository/sapj2eeclient.jar but it gives error i.e. "Could not verify signing in resource: http://prosindia:50100/rep/repository/sapj2eeclient.jar"
Appreciate if anybody could put some light on this issue as I am new to SAP XI .
Edited by: Rocky on Oct 12, 2008 6:42 PM
Edited by: Rocky on Oct 12, 2008 6:45 PM
Edited by: Rocky on Oct 12, 2008 6:46 PMHi,
Unable to open Integration Builderu2026checklist
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
Or, you can do it as mentioned below:
Integration builder is a fat client and the required java libraries are downloaded for the same from the server. Downloading of libraries only happen for the first time using the Java Web Start.
Sometimes there can occur problems while downloading theses libraries and error will show up as 'Unable to open Integration Builder'.Following is the checklist when this error occurs.
1. Ensure that the required JDK is being used in the clent system
2. Set the proxies to NONE in the Java Web Start by navigating
Start>Programs>Java Web Start>File>Preferences-->Proxies
3. Also check for the Host name & IP Address in the Hosts file under u201CC:WINDOWSsystem32driversetc hostsu201D
Regards,
Sarvesh -
Oracle Integration Repository not available
Hello,
there is a problem with Oracle Integration Repository which was available
at http://irep.oracle.com. The Welcome page is available but I cannot open the repository.
Is there a new address for this repository or it is not available anymore ?
Kind regards,
Marcinthere is a problem with Oracle Integration Repository which was available
at http://irep.oracle.com. The Welcome page is available but I cannot open the repository.
Is there a new address for this repository or it is not available anymore ?It should be available but looks like there is an issue with the site. Just wait for some time and it should be fixed.
There is no alternative site for iREP.
If you are on R12, you can use "Oracle Integration Repository" which is available as a responsibility.
Thanks,
Hussein -
XYZ.SystemHome.sapxyz not registered in SLD in HA environment
We have an HA (High Availability) Solution Manager 7.0 EHP1 system (SID = XYZ) installed on Unix servers. Virtual host names were used during the HA installation. The database runs on its own server (virtual hostname oraxyz) and the application runs on its own server (virtual hostname sapxyz). The SLD is local on the Solution Manager system. RZ70 (ABAP) and the VA SLD Data Supplier (Java) are both
configured and report regularly to the SLD.
We are trying to set up SMD agents. In the Solution Manager system we execute transaction solman_workcenter -> Root Cause Analysis -> Agent Administration. On the Agent Administration screen, we click on Agent Candidates Management. On the next screen, the following error is displayed: "Managing System 'XYZ.SystemHome.sapxyz' is not registered in the SLD". Also, the 'XYZ.SystemHome.sapxyz' entry in the Information section on this screen has a yellow triangle. The SLD connection tests work from this screen.
There are entries in the SLD for 'XYZ.SystemHome.oraxyz' but none for 'XYZ.SystemHome.sapxyz'. In SLD Administration -> Content Maintenance, the class SAP AS Java Cluster (SAP_J2EEEngineCluster) is named XYZ.SystemHome.oraxyz and is the only Content entry we found with that naming format (SID.SystemHome.orasid). I could not find any SLD Content with the name of XYZ.SystemHome.sapxyz.
Has anyone seen this error on their HA (or other) installation? Can the SAP_J2EEEngineCluster SystemHome property in SLD Content Maintenance be changed to XYZ.SystemHome.oraxyz without breaking anything else? Is there another way to eliminate this error?
Any help will be greatly appreciated.
WLThanks you Shailesh. I checked out the link but it looks like it's PI and not Sol Man. There appears to be a parameter in the PI ExchangeProfile to address this but there is no ExchangeProfile in Solution Manager.
I didn't see a way to change the SystemHome property of SAP_J2EEEngineCluster, but I don't know if that is the correct solution. I don't know why the managing system is not registering itself properly in the SLD with the correct hostname.
Any other ideas?
Regards,
WL -
IR and ID not registered in sld as exchange infrasructure ?
Hi Guys,
We have installed NW2004s and SP 14. The PI is configured for central sld on the solmanager. I did all the settings for the central sld.
If i go to Technical systems of type Exchange Infrastructure on central sld all the components except IR and ID are registred. I see there adapter engine, integration server,RWB but not ID and IR.
I cannot even import the SWCV from central sld into IR and i also dont see the list of adapters in ID and i get the error during the cache notification saying central sld cannot be reached.
any help would be really appreciated
Thanks,
SriniHi,
They will register themselves when you run them for the first time. Try it, if they don't, I can give you more information on the issue.
Also, check your Exchange Profile parameters for the host names, users and passwords.
For the adapter metadata missing in ID, did you import XI Content to the IR?
Regards,
Gökhan
Edited by: S. Gökhan Topçu on Jan 25, 2008 6:12 PM -
INtegration Repository not opening
Hi to all,
when am opening IR it will showing as unknown file type, and also it is saving a file as repository.jnlp , could you plz clear my problem ,Hello Ravi,
Go through these blogs:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
1) check the entries in the Host file for the XI boxes.
2) Check if the JWS has J2SE 1.4.2 installed.
3) check if the Cache contains comething for this boxes.
Thanks,
Satya Kumar
Reward points if it is useful.. -
Changing Message Mappings in Integration Repository not possible
Hi!
we are trying to make a change to our XI 7.0 SPS14 system in the design but the change button in message mapping (also other objects in Design) is greyed out. We do have the proper role SAP_XI_CONFIGURATOR_J2EE and SAP_XI_DEVELOPER_J2EE.
Did anyone experienced this before?
Thanks
NesimiDebashish wrote:
Please open the SWCV in IR and check the boxes........
>
> Objects are modifible and objects are orignal objects.
>
> Then you can edit all the objects.
Hi
That helped:) thanks.
Dawid -
Not able import SLD setings into my Integration repository
Hi,
I am not able import SLD setings into my Integration repository.
It says error while doing import via tools menu.
Please help to import SLD.
Regards,
Bala RajaHi,
While doing 'import of software component versions' in the IR thro tools menu, I have encountered an error like below.
"Unable to read software component versions from System Landscape Directory "sapserv:50000".
Note: I was not able to select SXI for related integration server in the Business System Wizard(SLD Setting).
Kindly advice me. -
Not able to import software component into Integration Repository from SLD
Hi,
I am new in XI(PI). I have created Technical system, business system and software component properly.
But when I go to IR and import the software component, it gives me an error message +*'Unable to read software component versions from System Landscape Directory "sapxi:50000".
Can anyone tell me the reason for this...and solution...Please help me out...
Thanks/Regards
Dinesh Singh.Hi,
As your question says that,your are not able to import your software component version in to IR.
First better you cross check your software component is available or not in the SLD.
Can you please go to SLD and got to search field and give your software component name and search for the availablity.If you are able to see your software component detailse and after referesh your cache.environment->clear sld data cache
and try once and also please check your SLD information like logical system name and everything and try If still your facing the same problem let me know.
Just check if the replies in this thread help you:
unable to import from SLD
Unable to read software component versions from SLD
Please reward points
Thanks
Vikranth -
Hi,
I am on the way of integrating ABAP API in PI 7.1 EHP 1 with MDM 7.1
I installed MDM ABAP API in PI system.
In transaction MDMAPIC, created MDM Server Connection with default port, DBMS Hosts and MDM Repository.
After I did the above tasks, I tested the RFC Connection, But its failed with the following error.
Connection Test MDM_API_GEN_DEFIANCEDEP
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67
Error Details ERROR: program DEFIANCEDEP.MDS not registered
Error Details LOCATION: SAP-Gateway on host DEFIANCEDPI / sapgw00
Error Details DETAIL: TP DEFIANCEDEP.MDS not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 87
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1714
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 711
Error Details TIME: Sat Mar 12 13:53:55 2011
Error Details VERSION: 2
Appreciated if replied with the proper resolution at the earliest.
Thanks in Advance
Pradeep ShettyHi Kanstantsin Chernichenka,
Thanks for your reply.
I tried the given suggestion. And even restarted the PI and MDM system.
Still, I am facing the same problem.
My allow.ip file contains
122.183.187.24;
122.183.187.25;
115.242.211.112;
115.184.2.47;
My MDS.ini file contents are
[MDM Server]
XCS Ini Version=1
Accelerator Dir=E:\usr\sap\MDM\MDS02\mdm\accelerators
Log Dir=E:\usr\sap\MDM\MDS02\log
Report Dir=E:\usr\sap\MDM\MDS02\mdm\reports
Archive Dir=E:\usr\sap\MDM\MDS02\mdm\archives
Distribution Root Dir=E:\usr\sap\MDM\MDS02\mdm\distributions
Transport Dir=E:\usr\sap\MDM\MDS02\mdm\transport
Modifications Dir=E:\usr\sap\MDM\MDS02\mdm\modifications
Lexicon Dir=E:\usr\sap\MDM\MDS02\exe\Lexicons\
Extra DBConnection Validation=True
Log SQL Errors=True
String Resource Dir=E:\usr\sap\MDM\MDS02\exe\LangStrings\
Stemmer Install Dir=E:\usr\sap\MDM\MDS02\exe
Wily Instrumentation=False
Wily Instrumentation Level Threshold=10
SLD Registration=True
Skip Unchanged Records=False
Autostart=0
MDS Ini Version=1
RELEASE\UseAssert=True
Tracing Level=3
LogViewer Format Logging=False
LogViewer Format Tracing=False
Trusted SAP Systems=DPI
TrustFiles Dir=E:\usr\sap\MDM\MDS02\config
Max Threads Per Operation=Auto
Lock Account After Failed Password Attempts=5
Lock Account Duration=1800
Minimal Password Length=5
Password Expiration Days=90
Password Expiration Warning=7
Disable Read Access To Corrupt Repositories=False
MDS Scone=
Log SQL Modifications=False
Maximum DBMS Bind Count=512
Oracle\Dll=OCI.DLL
Allow Console to Retrieve Files=True
Oracle Tablespace Files=1
Default Interface Language Code=eng
Default Interface Country Code=US
Client Ping Timeout Minutes=0
Inactive Client Timeout Minutes=30
Value Retrieval Threshold=0
Protect Family Nodes With Locked Data=False
Number Of Stemmers Per Language=2
TrexDllPath=
Import Slice Size=2048
Bulk Import Silo=True
Safe Silo Mode=False
Enable Change Stamp Logging=False
Always Verify DBMS Connection Before Executing SQL Statements=False
Disable Read Access To Repositories That Require Restart=False
Family Retrieval Threshold=30000
Enable Client Dictionaries=False
Restricted Url For Client Export=
Index_Page_Margin=10
Default Slice Size=500
Default Slice Wait Time MS=300
Enable Slicing For Non-Bulk Operations=False
Multithreaded Matching=True
SAP RFC Gateways=
[MDM Server\Databases\MDM_1MDMORCL_5_3_4_3]
Port=2345
Login=SYSTEM
Password+=ES066H2NVHDCFSJ206LJ9I995SLBVSA21OMQPM0
Stemmer Language=
Stemmer Variant=
Valid Keyword Chars=abcdefghijklmnopqrstuvwxyz0123456789
Max Large Text Length=250000
Number of Rows Per Fetch=100
Max Initial MB to Retain=4
Max Send Failure MB to Retain=4
Workflow Detailed Report=False
Mail Server=
Mail SMTP Timeout=1
Here I am requesting you to send your valuable feedback at the earliest.
Thanks
Pradeep Shetty -
Error in Integration Repository: ..SecStore.properties does not exist
Hi Guys!
I'm getting this error when I try to tick and save the values "Objects Are Original Objects" and "Objects Are Modifiable" in a software component version in the Integration Repository:
"ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
<hostname>\sapmnt\XIP\SYS\global\security\data\SecStore.properties" does not exist although it should.."
Would any of you know what might be wrong?
I'm using PI 7.0.
Warm Regards,
GlennIs your XI installed on SQL Server? Seems like there is a db connection error woth XI to the underlying database.
Check if the DB instance is running.
VJ -
Modification Buttons not active in Integration Repository
Hello,
we have a strange behaviour in Integration Repository. With java 1.3 on frontend all looks fine but with 1.6 modification buttons (text-preview...) for message-mapping objects (tab Design) are not active.
Does anybody know this issue? What can we do to sail round this problem?
Thanks
AndreasHi Andreas,
I faced the same issue some times back, when I upgraded java from 1.4 to 1.6 version.
So I had to disable all the java version later than java 1.4.2.
Try this steps :-
1. go to Control Panel - Java.
2. In Java control panel , go to General tab.
In temprory internet files click View. Here delete all the entries related to Your XI link.
3. In Java control panel, go to Java tab.
In java Applet Runtime Settings, click View. Uncheck all the version later than java 1.4.2.
In java Application Runtime Settings, click View. Uncheck all the version later than java 1.4.2.
Regards,
Sunil Chandra -
Users not able to create new ojects in Integration Repository
Hi,
We did a heterogeneous copy of PI from AIX to HPUX. After that we have done few post installation steps w.r.to PI Specific usage type.
all the developers are able to login to the integration repository, but when they are trying to "Edit" or "Create" new objects they are getting the following error
"You are not permitted to create new objects since the software component cannot be changed".
this is working with PISUPER user but not with any development user id and passwd.
any response is higly appreciated.
Thanks
SouravHey NM,
Thanks a lot for your suggestion. problem got resolved when i did what you said (checking the attributes with developers user id's)
Thanks
Sourav -
Not able to see "External Definitions" in Integration Repository
Hi Experts,
I am working on PI 7.1.
In the Integration Repository Menu :
SAP Basis --->SAP Basis 7.10 ->http://sap.com/xi/XI/System ->
"Service Interfaces",
"Message Types"
"Fault Message Types",
"Data Types",
"Adapter Metadata"
only are visible.
We need the "External Definitions". Is it not available in the standard SAP PI 7.1 ?
Do we have to import it explicitly?
Kindly advice.
Thanks in advance
~ SurajHey NM,
Thanks a lot for your suggestion. problem got resolved when i did what you said (checking the attributes with developers user id's)
Thanks
Sourav -
How to create abapProxy in nw 7.01 not 7.1 from integration repository
i use nw 7.01 , it's sproxy inteface is different old and new ones like 7.1 so i couldnt create abap proxy in sproxy.I created an message interface in integration repository but i couldnt find any object releated to this in sproxy..
I found some documentation about 7.1 , it mentions that you must create a service interface in IR but in my version it doesnt exist.
so how to create or copy existing proxy class?
Thanks alotI guess it should be similar to PI 7.0 environment wherein you have to create message interface in IR. Then use SPROXY transaction at R3 (not XI). From there you may select the interface and create proxy. For this make sure that abap proxy is activated at your R3 system.
Regards,
Prateek
Maybe you are looking for
-
I am trying to open a recent document in Pages. It says I need a newer version of pages to open document. When I go to install pages it says I already have on this computer and to check software updates. There are no updates showing. Now what?? I can
-
How to place the date in photos
How can you place the date in photos as they are taken?
-
Please help, simple requirement using Layers, there must be a solution?!
Hi, I am using a trial version of Adobe Acrobat X Pro, with a view to purchasing the program for several members of my staff. However, it does not seem to be able to do something fairly simple which I need.. unless someone can help please! I work wit
-
Word (version XP or onwards) could not be found on the machine
I am currently test driving LiveCycle Designer ES3. When I try to convert a Word document I get the error message "Word (version XP or onwards) could not be found on the machine". - I have tried the registry hack posted by ES2 users on another forum.
-
Testing Reports within Reports Builder
I am using Oracle Reports Builder 9i 9.0.2.0.3. I have created a simple report using a JDBC query and J_JDBCPDS. I have saved the file as a RDF and a JSP. I want to test this from within Reports Builder. I created a simple selection.HTM file that has