Integration Repository Objects not visible after Succesfully Import
Hello everybody,
I'm importing design objects via File System, the system gives a succesful message after import, but the objects are not imported, I've checked Cache and everything is green, anyone have any suggestions on why could this be happening, we have PI 7.0 SP 17, thanks in advance for your answers.
Regards,
Julio Cesar
Hello guys, thanks for your answers, actually is the correct .tpz file, and we are exporting a hole namespace, the software component version already exists in the target system, the objects are active in the source system, actually there is no change list with inactive objects in any of the systems the source or the target.
Regards,
Julio
Similar Messages
-
Objects not migrated after using import script
Hi All,
I had successfully export 1 schema with script below :
exp username/passwd@SID_*.*.*.* file=username.expdat (Export from remote server)
Then import refer to above file with script below:
imp username/passwd file=username.expdat fromuser=username touser=username (Import to local user)
Message been displayed is : Imported terminated successfully without warnings.
But the problem is cannot found any object (table,procedure,function,etc) migrated to my local DB.
Any suggestion would be very appreiciate :D
NB:
I also already create same tablespace name
Thanks,
Rizkyyes... the objects displayed is considering not imported .
Log file will only show you sql of the dump file . Show=y parameter is generally used to exact the sql statement in log file .
for example say while importing a dump file by any means one get few errors , then one can track the sql and fired the sql staement to get ridw of error instead of re-importing it.
Hope now it is clear to you.
--neeraj -
Integration Repository objects
Is it possible to store Integration Repository objects (Data Types,Message Types,Message Interfaces,Message Mappings and Interface Mappings) separately in the repository like (VSS ,CVS etc,.).Some times it will be helpful to merge specific versions of the objects and activate.If i am not wrong i can only see exporting IR objects as a whole and store in the repository.
Hi Anand,
I dont have a exct answer for it but i can give you a solution.....
the thing is you can export your datatype as XSD and save that XSD at your coninient path.....so once your are in need of datatype you just import that XSD so you can see your datatype there..............so once you have your datatype i dont think it will take much of time to build IR Objects other than Mapping....this too can be solve if you use Java or XSLT Mapping...just have a copy of your pgm in local so that you can make use of it wherever you want ....hope this simplifies your task...f you feel im wrong kindly inform me...
Cheers,
Sundararamaprasad -
Indesign transparency multiply pdf/x-1a pdf/x-4 export pdf object not visible
Hello,
I've created a simple Indesign cs4 document under osx demonstrating the problem. I've copied from an Indesign document a rectangle with a fill color 100% cyan and a transparency effect multiply and paste the object within a new created document. I've paste the same rectangle again and switched off the transparency effect. Then I've create a new rectangle again with the same fill color and multiply transparency effect.
When I create a pdf with the standard pdf/x-4 settings the copied rectangle with the multiply transparency effect has disappeared, while the other 2 rectangles are visible. Creating a pdf with the standard pdf/x-1 settings in Indesign, then all 3 rectangles are visible.
I've created a zip file named Indesign.zip with the following 3 elements:
- multiply.indd - indesign document
- pdfx1.pdf - export pdf with pdf/x1 settings (3 rectangles are visible)
- pdfx4.pdf - export pdf with pdf/x4 settings (only 2 rectangles are visible)
Opening the document with CS5 and creating pdf files, we obtain the same strange result.
You can download the zip file from the following link:
http://www.symeta.be/symeta/static/files/Indesign.zip
How do we explain this peculiar problem?
Regards,Peter, John,
If there is no solution finding corrupt objects before going to production (creating pdf files), then the problem is only detected when the job is printed! More important, if the corrupt object is located in an advertisement, then you customer wouldn't pay.
To further investigate the problem I've create 2 snippets with the following names:
- Snippet_Good_PDFx4_Result.idms (snippet of the object who's visible after conversion to pdf/x-4)
- Snippet_Wrong_PDFx4_Result.idms (snippet of the object who's not visible after conversion to pdf/x-4)
You can download these snippets from the following link.
http://www.symeta.be/symeta/static/files/Snippets.zip
When I replace the following 4 lines from the bad snippet:
<PathPointType Anchor="0.21122640285165062 35298.673065771356" LeftDirection="0.21122640285165062 35298.673065771356" RightDirection="0.21122640285165062 35298.673065771356"/>
<PathPointType Anchor="0.21122640285165062 35440.40534923592" LeftDirection="0.21122640285165062 35440.40534923592" RightDirection="0.21122640285165062 35440.40534923592"/>
<PathPointType Anchor="141.94350986741858 35440.40534923592" LeftDirection="141.94350986741858 35440.40534923592" RightDirection="141.94350986741858 35440.40534923592"/>
<PathPointType Anchor="141.94350986741858 35298.673065771356" LeftDirection="141.94350986741858 35298.673065771356" RightDirection="141.94350986741858 35298.673065771356"/>
With the following 4 lines from the good snippet:
<PathPointType Anchor="154.96062992125985 161.1023622054882" LeftDirection="154.96062992125985 161.1023622054882" RightDirection="154.96062992125985 161.1023622054882"/>
<PathPointType Anchor="154.96062992125985 302.8346456700551" LeftDirection="154.96062992125985 302.8346456700551" RightDirection="154.96062992125985 302.8346456700551"/>
<PathPointType Anchor="296.6929133858268 302.8346456700551" LeftDirection="296.6929133858268 302.8346456700551" RightDirection="296.6929133858268 302.8346456700551"/>
<PathPointType Anchor="296.6929133858268 161.1023622054882" LeftDirection="296.6929133858268 161.1023622054882" RightDirection="296.6929133858268 161.1023622054882"/>
Then the result is ok!
The bad one has very strange coordinate values, such as 35298.673065771356 which is about 12452 mm! When placing the bad snippet in a new Indesign document the result is ok, just after converting to pdfx/4 the object isn't visible anymore!
Who can justify this strange behaviour?
Regards? -
Renaming Integration Repository objects?
Hello everybody,
is there any way to rename already created integration repository objects (e.g. integration scenarios)? There are some distinct naming conventions for some of the SAP certification programs and some of the content already developed does not adhere to those conventions.
Thanks for your answers!
Regards
Jörg StrebelThe renaming is not given as an option, mainly because of the dependcies that are involved. If renamed, the object dependencies are very difficult to manage.
1) Copy the objects to new names.
2) Change the dependencies from bottom up, to point to the new names. Data Types first, then Message Types, then Interfaces, then Mappings etc.
3) Delete the objects with old names.
4) Activate the changes.
Hope this helps,
Bhanu -
Portal content not visible after installation nw2004s
Hello
Portal Content folders not visible after logon to EP after installation
using the url http://172.22.218.120:50400/irj
logon is using Administrator id.
top level navigation is displayed. but no folder hierarchy in PCD.
Please help
regards
JohnHello John,
Used the host name instead of the ip address in the url http://<host name>:50400/irj/portal.
Maintain the host name in the host file of the OS.
ip address host name.
Regards
Deb
[Reward Points for helpful answers] -
Google toolbar buttons (other then print) are not visible after installing Firefox 4 for Mac.
Yes - there is a fix... called IE9... http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages
-
Autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not visible after converting excel
Hello, I am having an issue with Autocad 2010 drawings not showing up in a pdf document. Normally, I cut and paste part of an Autocad 2010 drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe Distiller, I convert the Excel spread sheet into a pdf document for propriatary purposes. However, recently the drawing pasted into Excel will not fully appear on the pdf, the drawing is cut off past a certain point. The drawing will print normally in Excel, but in pdf will not print normally. If the drawing is shrunk below the "cut off" point, it appears normally. If the drawing is expanded above the "cut off" point, any additional image is lost. Any suggestions on how to fix the problem would be appreciated.
See "[Creating, Editing & Exporting PDFs] How to correct bad PDFdisplay
of Excel 2007 graph-Adobe ProX?" and similar discussions. Are you
scaling it to less than 100%?
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers -
quickly, easily, and for free!
>>> jblairdynis <[email protected]> 4/19/2012 10:44 AM >>>
autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not
visible after converting excel created by jblairdynis (
http://forums.adobe.com/people/jblairdynis ) in Creating, Editing &
Exporting PDFs - View the full discussion (
http://forums.adobe.com/message/4346704#4346704 )
Hello, I am having an issue with Autocad 2010 drawings not showing
up in a pdf document. Normally, I cut and paste part of an Autocad 2010
drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe
Distiller, I convert the Excel spread sheet into a pdf document for
propriatary purposes. However, recently the drawing pasted into Excel
will not fully appear on the pdf, the drawing is cut off past a certain
point. The drawing will print normally in Excel, but in pdf will not
print normally. If the drawing is shrunk below the "cut off" point, it
appears normally. If the drawing is expanded above the "cut off" point,
any additional image is lost. Any suggestions on how to fix the problem
would be appreciated.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4346704#4346704
To unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/4346704#4346704. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email (
mailto:discussions-community-acrobat-creating__editing_%[email protected]
) or at Adobe Forums (
http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message. -
Hot spot s not visible after latest iOS version update on my iPad please help
hey personal hot spot is not visible after iOS latest version update on my iPad mini please help
Hey Devinder from chd,
For most issues with Personal Hotspot, try out the basic troubleshooting in the article below. It does talk about iPhone but the troubleshooting is the same for your iPad. If you are still having issues, let me know and I can see what else we can do after that.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/en-us/HT203302
Basic troubleshooting
See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
Install the latest version of iOS.
Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
If you still see the issue, restore the iPhone.
Take it easy,
-Norm G. -
Download button on appstore is not visible after I have upgrated IOS 7 in my Iphone 5
Download button on appstore is not visible after I have upgrated IOS 7 in Iphone 5, how can I fix it?
I am using iPhone 4S. Under iOS 7.04 everything was working fine. Now that I have updated to new 7.1 version, I am finding that the overall phone speed as been degregated.
Some times when answering the phone, you select to answer or swipe, it seems to hang up the phone. I end up missing the call.
Some times when I try to hang up the phone, it does not hang up right away. The phone appears to get stuck, you hear voices on the other end, but the call has not dropped. It takes a while for the call to drop and free up the phone.
Typing is slow. As you type, it does not show right away, only after 2 to 4 words have been typed then it will show all those characters.
Internet browsing is slow.
I mostly use the phone for 3 things - Making/Receiving calls, Texting, and Internet browsing. I don't play apps.
This is NOT a jailbrake phone, it's as original as it can get. I am hoping a fix is put into place. I have really lost faith in Apple's way of iOS upgrades. This is my 2nd regret in upgrading to new iOS. -
I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com -
Data in CSV uploads successfully, but it is not visible after upload.
Hi,
I am using Apex 3.2 on Oracle 11g.
This is an imported application for which I am making changes as per my requirements. As I am new to Apex and even SQL, I request forum members to help me with this.
Please find below the old code for uploading data from CSV. It displays only 6 columns - Database Name, Server Name, Application Name, Application Provider, Critical, Remarks. This was successfully uploading all the data from CSV and that data was visible after upload.
OLD CODE:_
--PLSQL code for uploading application details
DECLARE
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len NUMBER:= 1;
v_line VARCHAR2 (32767):= NULL;
v_data_array wwv_flow_global.vc_arr2;
v_rows NUMBER;
v_count NUMBER;
v_dbid NUMBER;
v_serverid NUMBER;
v_sr_no NUMBER:=1;
v_last_char varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,APPNAME,APP_PROVIDER,DBID,SERVERID,CRITICAL,LAST_UPDATE_BY,LAST_UPDATE_DATE,REMARKS) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(3),
v_data_array(4),
v_dbid,
v_serverid,
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
==============================================================================================================================
Please find below the new code (which I modified as per my requirements) for uploading data from CSV. It displays 17 columns - Hostname, IP Address, Env Type, Env Num, Env Name, Application, Application Component, Notes, Cluster , Load Balanced, Business User Access Mechanism for Application, Env Owner, Controlled Environment, SSO Enabled, ADSI / LDAP / External Directory Authentication, Disaster Recovery Solution in Place, Interfaces with other application.
This is successfully uploading all the data from CSV, But this uploaded data is not visible in its respective tab.
_*NEW CODE:*_
--PLSQL code for uploading application details
DECLARE
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len NUMBER:= 1;
v_line VARCHAR2 (32767):= NULL;
v_data_array wwv_flow_global.vc_arr2;
v_rows NUMBER;
v_count NUMBER;
v_dbid NUMBER;
v_serverid NUMBER;
v_sr_no NUMBER:=1;
v_last_char varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
--SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
--SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
--SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,HOSTNAME,IPADDRESS,ENV_TYPE,ENV_NUM,ENV_NAME,APPLICATION,APPLICATION_COMPONENT,NOTES,CLSTR,LOAD_BALANCED,BUSINESS,ENV_OWNER,CONTROLLED,SSO_ENABLED,ADSI,DISASTER,INTERFACES) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8),
v_data_array(9),
v_data_array(10),
v_data_array(11),
v_data_array(12),
v_data_array(13),
v_data_array(14),
v_data_array(15),
v_data_array(16),
v_data_array(17);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
============================================================================================================================
FYI, CREATE TABLE_ is as below:
CREATE TABLE "REPOS_APPLICATIONS"
( "APPID" NUMBER,
"APPNAME" VARCHAR2(50),
"APP_PROVIDER" VARCHAR2(50),
"DBID" NUMBER,
"CRITICAL" VARCHAR2(3),
"REMARKS" VARCHAR2(255),
"LAST_UPDATE_DATE" TIMESTAMP (6) DEFAULT SYSDATE NOT NULL ENABLE,
"LAST_UPDATE_BY" VARCHAR2(10),
"SERVERID" NUMBER,
"HOSTNAME" VARCHAR2(20),
"IPADDRESS" VARCHAR2(16),
"ENV_TYPE" VARCHAR2(20),
"ENV_NUM" VARCHAR2(20),
"ENV_NAME" VARCHAR2(50),
"APPLICATION" VARCHAR2(50),
"APPLICATION_COMPONENT" VARCHAR2(50),
"NOTES" VARCHAR2(255),
"CLSTR" VARCHAR2(20),
"LOAD_BALANCED" VARCHAR2(20),
"BUSINESS" VARCHAR2(255),
"ENV_OWNER" VARCHAR2(20),
"CONTROLLED" VARCHAR2(20),
"SSO_ENABLED" VARCHAR2(20),
"ADSI" VARCHAR2(20),
"DISASTER" VARCHAR2(50),
"INTERFACES" VARCHAR2(50),
CONSTRAINT "REPOS_APPLICATIONS_PK" PRIMARY KEY ("APPID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R01" FOREIGN KEY ("DBID")
REFERENCES "REPOS_DATABASES" ("DBID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R02" FOREIGN KEY ("SERVERID")
REFERENCES "REPOS_SERVERS" ("SERVERID") ENABLE
==============================================================================================================================
It would be of great help if someone can help me to resolve this issue with uploading data from CSV.
Thanks & Regards
SharathHi,
You can see the installed dictionaries and change between them by right-clicking and choosing '''Languages''' inside a live text box eg. the box you are in when replying or right-clicking on the '''Search''' box on the top right corner of this page and choosing '''Check Spelling'''. -
VST edit screen not visible after a certain number in a session
Hi folks, I have a small strange problem. After I add a certain number of VSTs to a project, I can't see the GUI of the VST anymore. It's there, and working, but I can't edit any parameters because I can't see them anymore. Anyone with this problem and why it happens?
It seems to be worst with new Waves plugins (I have Gold bundle) but it's general with any VST. Strangely, it doesn't happen with DirectX plugins at all.
Lenovo laptop, i5, using firepod.The main screen is scrollable. The sub screen does not need to be. The box frame has been expanded to allow space for the new objects and the entire new space is visable. Only the objects located in the lower portion of the box are not visible.
-
Integration repository/directory not opening
I am new to XI, I have DPI box installed, after launching integration builder (SXMB_IFR) and click on Integration repository link I get a message
Do you want to open or save this file
Name: repository.jnlp
Type: Unkown File type
From: cor-str-app37
Then I have three options OPEN SAVE CANCEL
When I click on save it downloads a file with name repository.jnlp but nothing happens.
Same thing happens if I click on Integration Directory
Any help is appreciated.
I have Java Webstart installed on my laptop
cheers
chetanyaRight click on "My Computer", select properties tab.
-> advance- click on Environment Variables at bottom.
under user defined variables or system variables, do you find PATH on left hand side..?
If yes, do you find C:\j2sdk1.4.2_14\bin maintained against PATH?
If not select new under user defined, and add PATH and C:\j2sdk1.4.2_14\bin.
check the jdk version. you might have a diff version.
Regards
Pushkar
Maybe you are looking for
-
ICloud storage for new photos app
iI've just updated Yosemite and the new photos app is asking me to upgrade my storage, now if I do this will it upload all my photos on my iMac to the cloud including external drives connected to my iMac?
-
Copy and Paste does not work in filter statement of table data
I am using SQL Developer 3.0.04. I can not copy nor paste in the filter criteria when watching or editing table data. Is it a bug or do I have to change some settings?
-
Reached my broadband limit in a day???!!
My broadband was switched to Option 1 effective today. I have just recieved an email saying that I am near my limit and have used 7GB of the 10GB. This is impossible. I doubt I have used more than 100mb. I cannot be doing with this. I have been go
-
I am looking for any solutions that will allow Mac owners/users access to the Verizon 4G LTE network. Thank you,
-
Apple TV3 iTunes ethernet issues
I have been unsuccessfully trying to trouble shoot an intermittent connection/communication issue accessing iTunes with my Apple TV3 via ethernet. The issue is this: I can always connect to my iTunes music library (stored on an iMac) via wifi but con