Integration scenario for Centralized Emergency Access and Helpdesk / CHARM

Hi,
Is any of you aware of a scenario doc between GRC and SOLMAN? Since Change Requests are referred in GRC, I assume there is an integrated scenario...
Thanks in advance,
Best regards,
Ádá

Can Firefighter logon using the Netweaver Business Client to launch Firefighter ID?
- No, GRAC_SPM is the way to go.
Is that mandate to use GRC system to launch Firefighter ID using GRAC_SPM transaction code? or can the user logon to local system as well?
- Yes. However, the option would be nice to have a workaround in case GRC is down
What about Portal based system Firefighting functionality? Can we have Firefighter IDs on Netweaver Java system?
- As far as I know only for transactional SAP systems.
Will I be able to grant a Firefighter ID to a Firefighter User on hourly basis?
- Same as answered already  - no. 
For initial setup , how the initial data load of Firefighter Ids Owners, Controllers and Firefighter Users can be done? Are there options like load from Excel or CSV available as part of setup toolset?
- Same as answered already  - no.

Similar Messages

  • Documentation on Integration Scenarios for BAS-PV and DES

    Hi,
    Is there any documentation on the Integration Scenarios for BAS Postal Validation, and Duplicate-Check and Error-Tolerant Search for ECC 5.0?
    What we have is only for R3 4.6, and the behavior of business partners for ECC 5.0 is very much different as compared to R3 4.6.
    Thanks!

    The newest release of the sharepoint kit called internally (ipoint) should work fine with java infoview. I haven't set this up my self and you may need to open an incident with support to verify if Edge supports the newest sharepoint kit.
    Regards,
    Tim

  • Integration Scenario for Enhanced Interface determination

    Hello Friends,
    I am modeling the integration scenario for 1:N Mapping case, that is 1 outbound Interface and  3 inbound Interfaces. I am finding difficultly in modeling the integration scenario for enhanced interface determination.
    Kindly provide me inputs in configuring this case.
    Thanks

    Have you look this help?
    http://help.sap.com/saphelp_nw70/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
    2.      Integration Directory: Define the interface determination.
    Note the following:
    ○     The outbound interface of the multi-mapping must be entered as the sender interface in the key of the interface determination.
    ○     The interface determination type must be set to Enhanced.
    ○     Select the multi-mapping you defined previously from the Integration Repository.
    To select the interface mapping, use the input help ().
    The target interfaces of the interface mapping are displayed in the Inbound Interfaces frame.
    The number of messages (for an inbound interface) created in the mapping step is displayed in the Occurrence column.

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • GRC 10.0 - Centralized Emergency Access

    Hi experts,
    Have a question lets see if someone else have faced this same concern.
    We are facing an implementation of the new GRC - AC 10.0 and when configuring the component Emergency Access (former SPM) we realized that in order to assign and end user to a FF ID, the end user account must be created in the GRC AC server.
    This concept changes from the last AC 5.3 version where end users only needed to be created in the SAP ERP and have the role /VIRSA/Z_VFAT_FIREFIGHTER assigned in order to access transaction code /n/VIRSA/VFAT.
    So if what Iam saying is correct, that means that we have to create one user in GRC for each user that we have in the SAP ERP, is that correct? And, if that is correct, that means that we need to buy as many licenses for GRC 10.0 as the one that we have for the SAP ERP?
    Thanks very much for your support
    Best regards,

    Hi,
    only user who shall be able to use FFIDs (EAM) need a user on the GRC box! I guess these are not all users in your SAP ERP system?!
    Regards

  • XI Integration scenario for material replication from SRM to SRM-MDM

    Hi Guys,
    We are working with the following landscape:
    SRM Server 5.5
    ECC 6.0
    SRM-MDM 5.5 SP6
    PI 2005_1_700 SP0006
    I have a question for you about replication of the material master form SRM EBP to SRM-MDM.
    In XI we are trying to configure this scenario. For this we have imported the following XI Content:
    - SAP SRM Server 5.5
    - SAP SRM-MDM 2.0
    We have the following problem; that when tring to configure the this scenario we are getting GUID errors. Probable because some XI content is missing. In the SRM-MDM 2.0 XI content we also see that SRM 6.0 scenario's are avilable in the currenlty imported XI content, but when clicking on 'Edit action' in these scenario's we are getting the following error:
    "Software component version with GUID XXXXXXXXXX... does not exists"
    Can any one tell me why SRM 6.0 scenario's are availble in the XI content for SRM-MDM 2.0, and which additional XI content we need to import to get rid of these GUID error's?
    Becasue of this the configuration in the Integration Directory fails.Transfering the integration scenario to the Integration directory  gives a couple of errors: "Unable to load action. Check whether all necessary actions have been released in the integration repository".
    Hopefully some of you know what to do, because I am currenlty stuck....... Do we need to import additional XI content, or maybe the Xi content for SRM 6.0. If so where can I get the XI content for SRM 6.0. It is not available on the SAP Support portal as a download.
    Thx In advance.
    Regards,
    Wouter

    Hi,
    >"Software component version with GUID XXXXXXXXXX... does not exists"
    try updating SLD (CIM DATA) with the latest patch available
    Regards,
    Michal KRawczyk

  • Configuring Process Integration Scenarios for Advanced Adapter Engine

    Hello @all,
    i've an asynchronous SOAP scenario and would like to configure an integrated configuration for Advanced Adapter Engine using a process integration scenario. In the documentation (Link below) it is described, that you can select local communication using AAE in the model configurator, but I couldn't find any hint. Any idea?
    Documentation:
    http://help.sap.com/saphelp_nw73/helpdata/en/48/ce987b18d3424be10000000a421937/content.htm
    Thanks and kind regards
    Andreas

    Hi,
    Use thse links:
    Advanced Adapter Engine Configuration in PI 7.1
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?QuickLink=index&overridelayout=true&47047071760975
    Sreeni.

  • XI SRM Integration Scenarios for ShoppingCart model

    We've loaded the XI content for SRM (XI7_0_SRM_SERVER_7.xxxx) from the sap marketplace and reviewed the data types, messages, and interfaces. It appears there are no pre-built integration scenarios associated with a Shopping Cart model (Purchase Orders, Advance shipment notice, etc). Does a set of pre-built integration scenarios exist, or are these generally built manually? We are going to be pushing purchase orders from ECC to SUS in most of our scenarios. Thanks in advance.

    Hi Brian,
    You will have to use the standard XI scenario - " Plan driven procurement with supplier enablement" for document exchange between ECC & SUS.
    This will help u push ur PO's from ECC to SUS.
    Thanks
    Nikhil

  • Activate Integration Scenario for import at Integration Directory

    Hello all,
    How can i (or is the workaround) activate a message mapping / interface mapping without configured messagemapping at "Display Message Mapping" side? When i try to activate the not already configured message mapping i get following errors: Source message missing, Target message missing, Metadata missing, Mapping not sufficiently defined.
    Cause:
    First i want to build the frame at Integration Repository for the defined scenario and import at Integration Directory. Later i want to build the message mapping for the scenario.
    Many thanks in advanced!
    Jochen

    Hi,
    you cannot activate it without all proper values - sorry
    have a look at this blog:
    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Integration Scenario with Oracle SOA Suite and SAP

    Hi to all
    I have the following integration scenario:
    The customer have some applications in the integration landscape. All of this applications are integrated with Oracle Soa Suite.
    This customer, want to buy SAP ERP (ECC 6.0), and they want to integrate SAP ECC in their infrastructure.
    I told to them, that is necesary have Process Integration (PI), by have a services oriented architecture.
    But, I want to hear options, possibilities and comments. Where I find information related ?
    Thank you very much
    Dario

    Hi Rodriguez  ,
    you can use Oracle AS Adapter for SAP for integrating SAP system to oracle .
    some step you need to do in SAP ECC side for data transfer - like create TCP/IP RFC connection ,
    for TCP/IP RFC config. you can generate program ID in Oracle AS Adapter ..Also Oracle provides a SAP JRFC library  for integrating SAP system .
    you can find more information in given link -
    http://www.oracle.com/technology/products/integration/adapters/dev_support.html
    Regards,
    Amit Shivhare

  • Need help for configuring integration scenario for AII

    Hi,
    We are referring to "RFID-Enabled Outbound Processing: Configuration Guide" for transferring materials from ECC to AII through XI.
    So far we have been successful sending the IDOC to XI.
    When we display the XML message in XI using IDX5, we get the error message "No receiver could be determined".
    I request you to help us with the configuration of the integration scenario in XI.
    Regards.
    Gaurav

    Hi Yogesh,
    Thanks for reply.
    Maintaining XI Directory configuration
    u2022 Generate business scenario using business scenario configurator
    u2022 Creating a scenario
                      It is fine upto these two steps
    u2022 assigning business systems
                      We have assigned "AII" business system
                      only (receiver)
    u2022 creating communication channels
                       Following parameters are set for comm channel
                        Adapter type: HTTP
                        Configured as Receiver
                        Transport Protocol: HTTP: 1.0
                        Message Protocol: XI payload in HTTP Body
                        Adapter engine: Integration server
                        Addressing type: URL Address
                        Target host: <name of AII system>
                        Service number: <service no>
                        path prefix: /sap/xi/engine?type=entry
    u2022 defining receiver determinations
    u2022 defining interface determinations
    u2022 defining receiver agreements
                       All these were generated automatically
    Are these configurations alright?
    Regards,
    Gaurav

  • PI 7.1 Integrated Configuration for AAE - Issue Accessing Attachment

    Hello All,
    PI 7.1 in its new features allows access to the Attachment using UDF's withing Graphical Mapping.
    Tried this feature and works good in Graphical mappings; am able to access the Attachment; and write it into a Field on my target. This works with the standard XI pipeline steps of passing message from AE to IE back to AE.
    When trying to use the same set up with the Advanced Adapter Engine, - Integrated Configuration; this feature doesn't seem to work and the mapping run time triggers a Null Pointer Exception.
    None of the SAP documentation discusses this as a limitation of AAE and hence am wondering if this is a bug or is this a limitation? Has anyone on the forum tried this?
    Regards
    Bhavesh

    Hi Bhavesh,
    I also tried this scenario long back when PI7.1 was in Rampup mode. We tried and first part was working fine as you also written, but in second part we got stuck. After some research, we found that we cannot configure additional communication scenarios that contain, for example payload-based routing or a message split, with Integrated Configuration. You must define separate receiver determinations, interface determinations, and communication agreements to configure communication scenarios of this type. We can only configure communication scenarios where message is transfered withing AAE.
    MAy be you need to check the receiver interfaces and Mappings or may somthing missing there.Also check for authorized Service User.
    Possibilities are like something missing is in Integrated Configuration but not sure.
    Regards
    Aashish Sinha

  • New business scenario for reapir from customer and sending them to vendor.

    Hello team,
                          We have a scenario where we need to configure in the system -
    We  recieve a material from my customer for repair.We need to send this to my vendor who will repair  it and send them back to Us. On this we  recieve revenue from the customer and pay i pay half amount my vendor for the service.
    We are following above scenario in SAP as
    In the first step
    The production team create a serviece order in IW31 for the material that need to send to the vendor, which was recieved from the customer. When service order is created in the back end a Purchase requisition is created.
    In next step we  created a  PO w.r.f to the above PR and  we need to send this  to vendor on subcontracting so that we can track the material from him after the repair.
    The problem is --- When PR is created automatically during serviece order creation (iw31) we are unable to create Po with Item category L (subcontracting) because PR is not created with L.We are even unable to change L in  PR since it is created automatically at the background.We ried to change the field at document type in spro. But no luck.
    Pls let us know is there any other business process where we can handle this situation or any technical help to change the PR.
    Regards,
    L.chaitanya.

    Hi,
    please work out in this way...
    It can be done Using PM02 and PM03 control keys. Select the operation row select the External button in the bottom u will find Sub con check box u can click it .The prerequisities are create a material BOM in the bom as L item select a row and click the item which will be near to the header cap 2nd tab status/long text click it .Mat. Provision Ind select Lor X if it is not available go to IMG setting.Plant maintenance ->Master Data in Plant Maintenance and Customer Service->Bills of Material->Item Data->Define Material Provision Indicators, K&L will be standrad create S Rework Material,XRework Material from Subcontrmake a tick mark in Recursivity of Subcontracting Component and save it . while creating the material to the operation to be assigned from bom then in the component select the row go to the general button in the bottom then Mat. Prov. Ind will be there select rework material the system allows you to proceed further . save the order then check the PR it will be Account assignment will be F and Item categeory will be L selected automatically.
    Then create PO then do MB1b (prerequsitie the material should have stock)using PO reference( movement type 541) the it will be moved to the vendor stock (check with mmbe)
    Aganist PO Material sent to the vendor .While doing Goods Recipt do with MB01with movement type 101, now u can check the stock in mmbe it will be in storage location...
    Kuber

  • Help Needed Creating AppleScript for Dial Up Access and Updates

    Hello,
    Due to my location I can only access the internet via Dial Up. I would like to create a script that wakes up my Mini early in the AM, dials my ISP and checks to see if there are any Apple Updates. I'd like to do this at night so my family doesn't have to compete with updates when they are using the computer.
    I've done the Apple Scripting tutorials and have a feel how to do the basics. But I cannot find any information on how to access the USB Modem (US Robotics), get it to dial, access the "Check for Updates" page, download, install and then disconnect.
    Can anyone point me to a functional script that will do this or tell me where I can find the modem related scripting commands?
    Thanks

    1). Does your script both get and install updates if they exist ? If not what should be added to accomplish that?
    If you use man softwareupdate to look at the command line options for softwareupdate you'll find:
    -i | --install
    Each update specified by args is downloaded and unarchived,
    and also installed. The install flag requires root. args
    can be one of the following:
    item ... One or more update names.
    -a | --all All appropriate updates.
    -r | --req All required updates.
    So '-i' tells softwareupdate to install the updates, and '-a' tells it to install all available updates, as opposed to a specific update, or 'required' ones.
    2). Can you suggest an addition to the script that will disconnect the dial up modem and then shut down our Mac Mini?
    That's going to be harder because, as written, the script performs the softwareupdate in the background. It does that so that you don't run into timeout issues (by default AppleScript will timeout after a certain period, canceling the script in progress). Since it's not clear how long the updates will take to download and install it isn't possible to predict what the appropriate timeout should be.
    The easiest way to disconnect would be to just configure the dialup connection to disconnect after a certain period of idleness (System Preferences -> Network -> Modem -> Advanced -> PPP -> Options or some such). If that doesn't suffice let me know and I'll craft up a revised script.

  • GRC 10: Centralized Emergency Access  - SPM Questions

    Can Firefighter logon using the Netweaver Business Client to launch Firefighter ID?
    Is that mandate to use GRC system to launch Firefighter ID using GRAC_SPM transaction code? or can the user logon to local system as well?
    What about Portal based system Firefighting functionality? Can we have Firefighter IDs on Netweaver Java system?  
    Will I be able to grant a Firefighter ID to a Firefighter User  on hourly basis?
    For initial setup , how the initial data load of Firefighter Ids Owners, Controllers and Firefighter Users can be done? Are there options like load from Excel or CSV available as part of setup toolset?
    Edited by: sarath govindarajual on Mar 16, 2011 4:53 PM

    Can Firefighter logon using the Netweaver Business Client to launch Firefighter ID?
    - No, GRAC_SPM is the way to go.
    Is that mandate to use GRC system to launch Firefighter ID using GRAC_SPM transaction code? or can the user logon to local system as well?
    - Yes. However, the option would be nice to have a workaround in case GRC is down
    What about Portal based system Firefighting functionality? Can we have Firefighter IDs on Netweaver Java system?
    - As far as I know only for transactional SAP systems.
    Will I be able to grant a Firefighter ID to a Firefighter User on hourly basis?
    - Same as answered already  - no. 
    For initial setup , how the initial data load of Firefighter Ids Owners, Controllers and Firefighter Users can be done? Are there options like load from Excel or CSV available as part of setup toolset?
    - Same as answered already  - no.

Maybe you are looking for