Integration Service not enabling

By default, the services in windows will be running in MS Latin codepage. The Repository Service can be configured in UTF-8 codepage, the Integration Service data movement can be set to Unicode. However, if you run the Integration Service in UTF-8 codepage, the following error is displayed:serviceType serviceName severity timestamp threadName messageCode message
IS ISwinutF8 0$_:_$FATAL 09/26/2012 22:55:51.237 PM 1520 LM_36011 Code page mismatch. Service process is running in code page [MS Windows Latin 1 (ANSI), superset of Latin1] whereas the service is configured in the Admin Console to run in code page [UTF-8 encoding of Unicode]However, you can enable the Integration Service on Windows to run in UTF-8 codepade with the following settings in the Adminconsole > Integration Service > Environmental Variables:
NLS_LANG                               American_America.AL32UTF8
INFA_CODEPAGENAME             UTF-8
LANG                                      C
LC_ALL                                   C

Hi We installed Informatica 9.5.1 in windows 7. Repository service is up. While configuring Integration service, it is not anabling. Follwing error is coming."LM_36011 code page mismatch. Service process is running in Code page [UTF-8 encoding of Unicode] Where as the service is configured in admin console to run in code page [MS Windows Latin 1(ANSI) Superset of Latin1] " We have set the following environmental variables in Integration environment Variables.NLS_LANG American_America.AL32UTF8INFA_CODEPAGENAME UTF-8LANG CLC_ALL C Can you please let me know How to Enable Integration Service? Attached the Log files here. ThanksDigambar

Similar Messages

Icq on Blackberry "Service not enabled for this handheld"

Every time I try to login to icq on my blackberry it gives me an error that says "Service not enabled for this handheld". I called Sprint whom my service is through and they told me that everything is enabled for messaging programs on my account. Does anyone know how I can get this working? My blackberry is an 8830 world edition.
Message Edited by harley9 on 03-03-2009 03:31 PM

Reminder to remain courteous and on topic. Thanks

Aim service not enabled

Whenever I try to sign on to aol instant messaging (aim) it gives me this message "service not enabled for this handheld."
Anyone know how I can get this to be enabled?

This means that your carrier and blackberry and AIM do not have an agreement set up. Like I can't use WLM on att. Try a third party messenger service like webmessenger. That's what I use so I can talk with my WLM contacts. It may work for AIM too. Give it a try.
~Lorrie~ Master of All Things Blackberry!

Google talk not working on my 8310..."service not enabled for this handheld"

Hi,
I use a 8310 curve (I use a 8310 Curve software version 4.2.2.181 (Platform 2.5.0.35). My firm has an enterprise server.
I tried installing google ttalk on my device but i get an error message...."Service not enabled for this handheld".
My colleagues using the same device with the same software version did not face this problem and are able to use GTalk mobile.
Please let me know how this can be solved.
Thanks,
Jassi

It should be installed without any issue!!!
Check with your BES admin to know whether they've blocked GTalk usage for employees.
Another thing are you on AT&T? If yes then you won't be able to use Google Talk. Check this link for details.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Essbase Integration Services Not Starting

Hi All,
I am using EPM 11.1.2.1 and unable to start the Essbase Integration Services. When I started the services from services.msc, I got the below error:
Windows could not start the Hyperion Integration Services on Local Computer.
For more information, review the System Event Log. If this is a non-Microsoft service, contact the service
vendor, and refer to service-specific error code 0.
Event ID 7024
What could be wrong with it / Does someone could help me ?
Thanks,
Alvaro

To whom it may concern......
1. Check in Windows Task Manager for the 'olapisvr.exe' process, and if it's running stop it.
2. Start the EIS Service Windows Services (Service.msc) as normal.
EIS started sucessfully...
Thanks

Service not enabled for this handheld.

I have downloaded yahoo messenger for my BB curve 8310, but when I go to log in it says that the service is not enabled for this handheld. How do I enable it?
thanks!!

Please check with your carrier whether your carrier or your region supports yahoo access.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Windows Live Messenger - Service not enabled on this device

Hi
Just got my BlackBerry Curve 8900 today, and firstly it won't let me install AppWorld? It's the most up to date software but it says "System requirements not met"
Also I managed to download Windows Live Messenger, but it won't let me sign in. When I try all it says is "This service is not enabled on this handheld".
I've used and installed AppWorld on my brothers phone which is the same, and with the same network; Vodafone. His works fine, am I doing something wrong?
Thank you very much!

shroudedsoulz wrote:
did you get any support for this
im also having the same problem
Hi and Welcome to the Forums!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should check with your carrier to ensure that you have an adequate data service from them to enable the services you desire:
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hyper-V windows 7 embedded standard VHD install integration services not working

My existing VM (windows 7 embedded standard) is not letting me install integration services. Has anyone been able to do it, is there somewhere I can find this "integration disk" that will install this on this windows 7 edition? The current integration
disk does not support windows embedded standard.

You are correct, there is no support for Embedded.
The drivers would need to be incorporated into the image, just like any other drivers. However, you cannot get driver installation files like you can with 3rd parties.
In this case, the drivers are essentially becoming part of the kernel itself.
I don't know about embedded 8 or 8.1 either.
The better place to ask would be in the Windows Embedded forums on MSDN.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

IM services not enabled

IM services not enabled

Hi there!
There are a multitude of questions/answers to go through to help you out, but those won't work unless you come to the forums and register an account. Please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Pref Pane Error - Service Not Enabled

As I await my answer from Chronos support, thought I might ask here. Just upgraded their iClipboard program to the new v4. But when I try to turn it ON in the Pref Pane, I get a, "Service not available. The service application either could not be found or an error occurred during launch. Locate and double-click the service application to see if there's a problem."
Any idea what I may be doing wrong?
Clint Bradford

As I await my answer from Chronos support, thought I might ask here. Just upgraded their iClipboard program to the new v4. But when I try to turn it ON in the Pref Pane, I get a, "Service not available. The service application either could not be found or an error occurred during launch. Locate and double-click the service application to see if there's a problem."
Any idea what I may be doing wrong?
Clint Bradford

Generic Object Services not enabled in MB23 Material Reservation

Hi all,
The Generic Object Services Toolbox is not available in SAP MM transaction MB23 used for accessing Material Reservations. SAP version is 4.7/620.
As its a standard SAP transaction referring to standard business object type BUS2093, so I was expecting that the Object Services will be enabled for this.
Kindly help as to how I can configure the display of Object Services toolbox in this transaction to link attachments. (If its regarding changing some code like including cl_gos_manager or SWU_OBJECT_PUBLISH, then kindly explain in detail.
With Regards
Neha

Thanks Deepak,
But I thought the described methdology in the PDF pointed by the URL is for how to do it for any custom business object type, will it be useful for the SAP standard business object as well like BUS2093. When I try to edit an already created SAP object, it starts asking for an access key.
With Regards
Neha

Yahoo Messenger - Service Not Enabled on this Handheld

I just installed Yahoo Messenger and get this error when I try to sign on.
Is there something I'm doing wrong? I have a BlackBerry Unlimited Internet and Texting package through ATT and I have the BB Curve.

AT&T doesn't allow yahoo messenger. There is a workaround, but I don't have a link to it. It is kind of involved, but doable. (Having said that . . . I didn't do it.) You should be able to find it through google or crackberry.com or even the RIM forums.
I just downloaded JiveTalk. $20 and it works like a charm across pretty much any messenger service I think. I know for sure it works on yahoo and ms live messengers.

Hyperion Integration Services - Not responding

Hi,
I forcefully closed the EIS console during Member Load using windows "Task Manager". When I re opened the EIS console and trying to connect to the EIS server it's not responding. It happened many times. It works again only if I restart the EIS server. But restarting the server every time is not recommended. Could you guess what would be the reason for this. And suggest me the solution.

Hi,
Have you had a look at the EIS log in Hyperion\AnalyticIntegrationServices\log\olapisvr.log to see if you can see any clues to why it is crashing.
Cheers
John
http://john-goodwin.blogspot.com/

EPM 11.1.2 hyperion integration services is not started

Hi People,
I have an issue in my EPM 11.1.2, sometimes the service "Hyperion Integration Services" not start up.
I dont know if I need this service running... all others services are running sucessfully.
Does anyone know why would I need that service running ?
Thanks in advance
Claudia

Have you met the prereqs:
When creating a Microsoft SQL Server database for use as a repository, ensure that you set these options:
Set READ_COMMITTED_SNAPSHOT = ON
Set ALLOW_SNAPSHOT_ISOLATION = ON
Also worth checking out the following Oracle Support doc:
Unable to Start EPMA Process Manager Service When Using SQL Server Named Instance or Non Standard Port (Doc ID 1162697.1)
Cheers
John
http://john-goodwin.blogspot.com/

Windows audio service is not enable

windows audio service not enable, when i try to enable it, error1068 the dependency service or group failed to start and 1059 cercular dependency service specified are displayed

Quote from irfan H
The error message indicates that the Audio service is failing to start on your computer.
You can try the below methods to fix this issue:
Method 1:
Run Audio troubleshooter that will automatically diagnose and fix any audio issues. You can refer this article to run Audio troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Playing-Audio-troubleshooter
Method 2:
Check the services manually.
I suggest that you check if the dependency services are started and check if you have the same issue.
a.     Click Start, type Services.msc in the Start Search box.
b.     Scroll down the list of services, right-click Windows Audio and select Start.
c.       Select Properties for Windows Audio and set its Startup Type to Automatic.
If the Windows Audio service does not start and you get the error ‘Error 1068: The dependency service or group failed to start, then make sure that the following services are started and their Startup Type is set to Automatic’
a.     Plug and Play
b.     Multimedia Class Scheduler
c.      Windows Audio Endpoint Builder
Method 3:
If the dependency services are not starting, you can uninstall and reinstall the Audio drivers. This will reset all the Audio components on your computer.
To uninstall a device with Device Manager:
a.     Click on start and type devmgmt.msc
b.     In Device Manager's left panel, open the node that represents. You should be able to find the Audio device under the Sound, Audio and Game controller. Uninstall and then right-click the device entry.
c.      On the shortcut menu, click Uninstall.
d.     On the Confirm Device Removal dialog box, click OK to start the uninstall process.
Once you uninstall the device, install the latest drivers by downloading it from the manufacturers’ website (Realtek).
Note:Make sure that you have the source to install the Audio drivers before you install it. Also create a System restore point before uninstalling the device.
Thanks,
Irfan H, Microsoft Answers Support Engineer. Visit our Microsoft Answers Feedback Forum and let us know what you think.

Integration Service not enabling

Similar Messages

Maybe you are looking for