Integration Services Console

Hi all,
I installed relational database(ORACLE) and Essbase in seperate machine.
Then i created the DSN name in Oracle Installed Machine.
I mentioned that DSN name in Integration Services Console [Essbase Installed Machine], after doing this i get following Error.
http://minus.com/m8Cehe6iP*
Kindly view that URL and guide me.
Thanks in advance
ChiDam

Did u configure EIS to Essbase server? and did u see essbase server Services is running ?
Once u confirm above steps
Try to Check the Network Connectivity between the Server and Client Machines by using the commands:
* telnet
* ping
Using ping:
On Client Machine, open a Windows command prompt.
1. Type the Command:
C:\>ping <Server_Machine_IP Address>
2. Press "Enter" key which should return Ping Statistics with all Packets Sent. This confirms if there is Network Connectivity.
Using telnet:
On Client Machine, open a Windows command prompt.
1. Type the Command:
C:\>telnet <Server_Machine_IP Address>
2. Press "Enter" key which should return either an error or an open telnet session with the requested server. This confirms if there is Network Connectivity.
try checking these ..Hope this helps to show ur connectivity between ur client and server

Similar Messages

Integration Services Console cannot start

Windows XP Professional SP2
Installed the following;
- Hyperion Shared Services Release 9.3.1
- Hyperion Essbase - System 9 Release 9.3.1 Server
- Hyperion Essbase - System 9 Release 9.3.1 Client
- Essbase Administration Services Release 9.3.1
- Essbase Integration Services Release 9.3.1
When I tried to start Programs > Essbase > Integration Services > Integration Services Console, olapbldr crashes.
Anyone seen similar problems?
Thanks,
Kun

Installing Reporting & Analysis software changes the value of the system variable ARBORPATH, perhaps that's causing EIS to hiccup. If you still have Reporting installed just make sure your ARBORPATH on your server & clients is:
C:\Hyperion\AnalyticServices
(or whatever the path is to where you have AnalyticServices installed). Remove the extraneous entry that Reporting creates! It is not needed unless you have it installed on a box that has no Essbase installed, and only if you plan to use Essbase as a reporting data source. It causes issues with the Excel add-in for sure and I suspect it may be messing with your EIS.
Let us know if that helps. I assume this is 9.3.1?
-Karen

Error while trying to log into Essabase integration services console

Hi all,
I've installed successfully Essabase integration services in standalone mode,
The EAS works correcty,
now every time I try to log into the Essabase integration services console the OLAP METADATA CATALOG combobox is empty and I got an error
"error: there is currently no connection between the console and integration server. Ensure that the server is running and try reconnecting.
Any suggestion?
Thanks in advance

Hi All,
Even iam getting the same error when loggin into the EIS console. before getting into the console i started the EI Server.
when entering the EIS console this above error is thrown, i am new to the EIS, and OLAP and meta ouline configuration, some DSN creation little confused with the configuration.
i have ORacle 9i as the DB.
Any help will be really appreciated.
Thanks

Chinese Character Problem in Essbase Integration Service & Oracle9i

I installed oracle9i on windows2000,which character set is SIMPLIFIED CHINESE_CHINA.zhs16cgb231280. And I installed Essbase Integration Service 6.5.4 on HP-UNIX server. I designed an OLAP Model in Integration Services Console and I defined some dimensions name using chinese characters. When I saved the model, the chinese characters I inputed is saved as some question marks(?) in the tables in oracle 9i. After I loaded the dimension data which include the chinese charaters, the dimension data which is chinese characters also displayed question marks in the EIS console. I have added the variable NLS_LANG="SIMPLIFIED CHINESE_CHINA.zhs16cgb231280" in the .profile, but it did not work either. How can I solve this problem? Can I do any configuration on EIS files to solve this problem? Would you please help me? Thank you very much!

Check for SETLOCALE in EIS<BR>SETLOCALE <LANGUAGE_TERRITORY.CODEPAGE@SORT><BR>SETLOCALE .UTF8@default<BR>this might help you.

Hyperion analytic integration services

How to add formulas on members of metaoutline in hyperion analytic integration services console? It is throwing up error like "members only with dynamic hierarchy can be added with formulas".How to give a member as dynamic hierarchy in integration services ?
Pls help me out with some formula-- as the client needs to have the avg of the members of profitcenter dimension in its parent instead of the consolidated sum.Eg: i have a member velocity1 in measure dim and in profitcenter dim,asia underwhich i have india ,china ,pak etc. so teh client wants the velocity1 value for asia to be the avg of india,china and pak instead of sum.
You can also mail me at [email protected]

By default, only the accounts dimenion can have formulas, If you want formulas on other dimensions they have to be set as dynamic. As the last poster said, right click on the dimension go to properties and on the member info tab set it to dynamic. A couple words of warning. Dynamic hierarichies are not stored in aggregations so they can cause retievals to be slower. Also, you may have to use solve order on members with formulas to get the formula to work correctly

[Forum FAQ] How to upgrade the Linux Integration Service

Symptom
When you move a Linux guest virtual machine from the legacy system to Windows Server 2012 R2 Hyper-V host, you may face the incompatibility issues. The most common problems are that the mouse pointer maybe a little inaccuracies, the guest VM cannot use the
dynamic memory.
Cause
The cause may be that the integration service not compatible with the Windows Server 2012 R2 Hyper-V host.
Solution
We need to upgrade the integration service to at least version 3.5.
In this demo, we use the CentOS 5.8_x86_x64.
You can refer to the following steps to perform the upgrading.
1. Before install the Integration service you can use the following command to check the version of the installed Integration service. (Figure 1)
#su root
#/sbin/modinfo hv_vmbus
Figure 1: check the version of the installed Integration service
2. Download the Integration Service 3.5 image from here.
http://www.microsoft.com/en-us/download/details.aspx?id=41554
3. Insert the Integration Service 3.5 image.
a. Open Hyper-V Linux guest VM console.
b. Click-> Media->DVD Drive-> Specific the Integration service image location, insert Disk.
4. Mount the image.
If automount is enable, the Integration service image will be mounted automatically. If not, please use the following command to mount the image. (Figure 2)
#mount /dev/cdrom /media
Figure 2: Mount the image
After that, we can see the image content. (Figure 3)
Figure 3: Imange content
5. Upgrade the integration service.
Use the following command locate to the current Linux Distribution Directory. In this example, we select the RHEL58. (Figure 4)
#cd RHEL58
#./upgraee.sh
Figure 4: Locate the Linux Distribution Directory
When you see the message, "Linux Integration Service for Hyper-V has been upgraded. Please reboot your system", it means the upgrading is finished.
6. Reboot your Linux system. (Figure 5)
Figure 5: Reboot the system
7. Confirm the upgrading.
After Linux boots up, use the following command to check if the upgrading is succeed. (Figure 6)
#/sbin/modinfo hv_vmbus
Figure 6: Verify the upgrading.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

May be you should write a WIKI article on same.

Integrated Services act up when VM is part of domain?

Running Server 2012 R2 Datacenter on a HP Proliant 380p Gen8 (the HP was patched with the latest SPP)
I have created two templates running 2012 R2 Standard. (A Gen 1 and a Gen 2) The following scenario applies to machines made from both these templates.
All Oss are patched to current (as of Wed).
When the server is not part of the domain, and one selects shutdown within Hyper-V manager, the machines shut down with no issue. Fast. (You’ll see “shutting down 5%” then “Succeeded”)
However, when joined to the domain, and one shuts it down, the process is slower (You’ll see “shutting down 5%...10%...15%” etc. in 5% increments until…)
at 65% of shutdown integrated services clears from "Up to date" to ‘blank' - meaning states nothing. This is observed in the summary of the VM.
At 90% of shutdown the process hangs, then after some time the Heartbeat reports Lost Communication. This is observed in the summary of the VM.
One can not log into the server via console.
One is forced to turn off the VM, however when turned off the status goes to Shutdown Succeeded (this is different than a straight Turn Off…the process is ID’d as Turned Off.
The event logs on the guest are clean (not only within granular Applications and Services, but just reviewing the EventLog entries within System. As far as the OS is concerned, these are clean shutdowns (unless a Turn Off was
initially initiated).
Confirmed integrated services are current (built into OS, but when I rerun it is reported up to date at 6.3.9600.16384.
Ran sfc /scannow on the guest, no issue reported.
same results if the guest server is connected to network or not.
Now, I have tested by removing the server from the domain and re-adding it back three separate times and the results are the same (in a workgroup no issue, when part of domain, the above occurs).
The Host is within the domain. They are all on the same network. Should be noted, when joined to the domain, the domain functionality (shares, etc) function as expecte

I don't think this has anything to do with Hyper-V integration service. What I'm reading is consistent with the integration service working as designed, initiating a shutdown, that includes shutting itself down. Slow shutdown when domain joined has to do
with domain GPOs, or shutdown procedures when domain joined. Possibilities include:
Maybe you clear the page-file at shutdown. This may be set via GPO. To check it, in regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management, locate the value ClearPageFileAtShutdown and make sure it is set to
0.
By default on shutdown, Windows waits 12 seconds per each active application to close before forcing it. You can try tweaking the wait time to see if you speed up the shutdown process. In regedit find HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control,
modify the WaitToKillServiceTimeout value in milliseconds
Make a
shutdown trace to determine the cause with a tool like this one. See
this post for more details.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

How ro move integration services from dev to test

hi
how ro move integration services from dev to test

You should be able to export/import the models/metaoutlines.
In the EIS console go to File > XML Import/Export and export the Model and Outline to XML, then import into your target environment.
Cheers
John
http://john-goodwin.blogspot.com/

Integration Service not enabling

By default, the services in windows will be running in MS Latin codepage. The Repository Service can be configured in UTF-8 codepage, the Integration Service data movement can be set to Unicode. However, if you run the Integration Service in UTF-8 codepage, the following error is displayed:serviceType serviceName severity timestamp threadName messageCode message
IS ISwinutF8 0$_:_$FATAL 09/26/2012 22:55:51.237 PM 1520 LM_36011 Code page mismatch. Service process is running in code page [MS Windows Latin 1 (ANSI), superset of Latin1] whereas the service is configured in the Admin Console to run in code page [UTF-8 encoding of Unicode]However, you can enable the Integration Service on Windows to run in UTF-8 codepade with the following settings in the Adminconsole > Integration Service > Environmental Variables:
NLS_LANG                               American_America.AL32UTF8
INFA_CODEPAGENAME             UTF-8
LANG                                      C
LC_ALL                                   C

Hi   We installed Informatica 9.5.1 in windows 7.    Repository service is up. While configuring Integration service, it is not anabling.    Follwing error is coming."LM_36011   code page mismatch. Service process is running in Code page [UTF-8 encoding of Unicode] Where as the service is configured in admin console to run in code page [MS Windows Latin 1(ANSI) Superset of Latin1] "  We have set the following environmental variables in Integration environment Variables.NLS_LANG                                 American_America.AL32UTF8INFA_CODEPAGENAME             UTF-8LANG            CLC_ALL          C Can you please let me know How to Enable Integration Service? Attached the Log files here. ThanksDigambar

DOM_10079 error while starting integration services of Informatica 9.0

Hi Team,
We are getting error DOM_10079 while starting integration services of Informatica and integartion services not started . Repository service is running fine.
Thanks in Advance ,
Prashant Salve

This info is not sufficient to tell the reason.
Check your domain logs in admin console and see the error messages. Post your domain logs
Make sure integration services is connected with repository and also the code page

Loading metadata through integration services

Hi, I am trying to load metadata into a BSO cube through integration services. In the log file (Olapisvr), I see that dimensions are being built but it's unable to save the outline in the end. I get these error messages:
EssbaseAPI: You have been logged out by supervisor [CONSOLE], please login again
Analytic Services Error Number 1051021.Failed to save outline
Analytic Services Error Number 1051021.Failed to get information for Database Plan1.
When I try to load smaller number of members, it works fine. Why do you think, I am facing this problem?
Thanks.

How long are these metadata builds taking?
It looks like you need to increase your auto timeout settings in AAS/EAS.
This from error messages...
1051021 You have been logged out due to
inactivity or explicitly by the
supervisor.
The system logged you off
because of extended
inactivity.
Your system administrator
or supervisor has logged
you off.
Log in to the system and
resume your processes.
See your system
administrator or
supervisor.
Robert

Integrations services error 4000 - integration services does not match the expected version

I have a 2 node high availability cluster built on 2012r2 DataCentre. One VM continually fails to backup and gives the event log error
"Hyper-V Volume Shadow Copy Requestor failed to connect to virtual machine 'QuadPro' because the version does not match the version expected by Hyper-V (Virtual machine ID 094B6B22-BBED-4D0B-8E47-D8D4D0D3F986). Framework version: Negotiated (0.0) -
Expected (3.0); Message version: Negotiated (0.0) - Expected (5.0). To fix this problem, you must upgrade the integration services. To upgrade, connect to the virtual machine and select Insert Integration Services Setup Disk from the Action menu."
When I do the suggested action I get a message stating
"The computer is already running the current version of integration services (version 6.3.9600.16384)".
This VM was built through the failover management console under 2012r2. The VM in question is a 2008r2 standard server running a single database application.
Please advise.
Matt

Hi,
I have run the command using both nodes and get the following error:
PS C:\Users\*******> Get-VMIntegrationService -ComputerName node01 -VMName quadpro
Get-VMIntegrationService : A parameter is invalid. Hyper-V was unable to find a virtual machine with name quadpro.
At line:1 char:1
+ Get-VMIntegrationService -ComputerName node01 -VMName quadpro
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: (quadpro:String) [Get-VMIntegrationService], VirtualizationInvalidArgum
   entException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.GetVMIntegrationServiceCommand
However I tried one of the other VMs for testing purposes (and to check syntax etc) and got the following success message.
PS C:\Users\******> Get-VMIntegrationService -ComputerName node02 -VMName appserver01
VMName      Name                    Enabled PrimaryStatusDescription SecondaryStatusDescription
Appserver01 Time Synchronization    True    OK
Appserver01 Heartbeat               True    OK
OK
Appserver01 Key-Value Pair Exchange True    OK
Appserver01 Shutdown                True    OK
Appserver01 VSS                     True    OK
Appserver01 Guest Service Interface False   OK

Where do I find the Integration Services Setup Disk?

When I connect to my VM and select Insert Integration Services Setup Disk from the Action menu, nothing happens. Should this be on my my Windows Server 2008 R2 DVD that I used to set yp Hyper-V and my two VMs?
Thanks

Again, the Integration Services are ONLY for installation inside a virtual machine. You aren't gonig to see an option for them unless you're connected to a VM via the Hyper-V management console (the option is under the Action menu.)
Windows 7 includes the Hyper-V integration components, you may need to upgrade them depending on what service pack levels your Win7 and Hyper-V server are on.
However, the legacy adapter and integration components aren't dependent upon each other.
The legacy adapter would be added to your VM before you install an OS in your VM and IC are installed after you finish installing your OS. With Windows7 you don't need to use the legacy adapter since Windows 7 is a supported OS and Integration
components are available.
Also, are you trying to add the legacy adapter while the Windows 7 VM is running or in a saved state? If so, that is the reason it isn't available to install, the VM needs to be powered off.

Unable to register Informatica Integration Service & Repository on DAC

hi Gurus:
I´m not able to register the Informatica services on DAC. The services are running and I also created a Custom Property on the Integration Services to set the server port to 4006, I created the Administrator user on the Informatica Administrator Console, but nothing has worked.
My OBIEE Apps version is 7.9.6.3 and Informatica is 9.0.1 hotfix 2.
Thanks

Check these
For Type=Informatica
Service--> Give Integration service name
Server Port: 6007 as per my config
Domain-->Doamin_<hostname>
Repository Name-> as per your config
For Type=Repository
Hostname-><hostname>
Server Port : 6005 as per my config
Domain-->Doamin_<hostname>
Repository Name-> as per your config
The host and port number can get from file \Informatica\9.0.1\domains.infa
there is a possibility for work with same ports as I mentioned
Make sure your dac and informatica servers are up and running
Mark if helps

Essbase Administration Services Console Login Error.

Hi All,
I am new to Hyperion and Essbase. I have been working in OBIEE for sometime. Few days back I have installed most of the available products in Oracle EPM 11.1.1 in my XP machine with Oracle10g. It looks like all the configuration went good - green marks in EPM System Configuration utility, and I am able to login Shared Services using "hypuser/password".
But when I try to login Essbase Administration Services Console using the following
Server: "MyMachineName",
User: "WindowsUser" &
Pwd: "WindowsPwd"
I am getting an error "Could not Connect to Administration Server machinename".
Could anyone help me in solving this issue.
Do I need to make any change in any parameter files or any other settings need to be done before string exploring the application.
Also, I am struggling to find the starting point to learn Hyperion related products could you please shed some light on it. I have read few documents provided by Oracle but still I couldn't make much progress.
Thanks
Yar.

Thanks for the reply.
I am using Tomcat included in the package. I am not using 10gApps.
I have installed EPM system in another machine, but to my surprise I GOT THE SAME ISSUE. I used Tomcat which is included in the package. I don't know where it went wrong altough I followed the procedures in the installation and configuration guide.
One more thing is I am able to open Integration Services and connect to my Oracle SH schema through ODBC adn able to ready for creating OLAP Cubes.
When examining the log file ESSBASE.log I noticed an error message
Single Sign On function call css_init failed with error CSS Error: CSS method invocation error: com.hyperion.css.CSSSystem.<init>
So, I believe there may be some configuration settings missing but not sure.
Hope these are added info.
Thanks
Yar
Edited by: Yar on Aug 28, 2008 11:35 AM
Edited by: Yar on Aug 28, 2008 11:36 AM

Integration Services Console

Similar Messages

Maybe you are looking for