Integration with Corticon Business Rules Server

Has anyone integrated the Corticon Business Rules Server into BEA WL ? The CBR Server can be deployed as a stateless session bean, but I am not really sure hwo to integrate a session bean into WL. Maybe sonmeone can point me to the proper docs. If someone has used Corticon, it would be even better!
Thanks

There are two ways you can do it.
1. Oracle Business Rules can be exposed as standard soap based web-services that can be consumed in OSB through Business Services. Proxy Services in OSB can call these BS created out of the rules services in their message pipelines.
2. Second option is to use DIRECT-BINDING to communicate between a Rule based Composite and OSB. Direct Binding optimizes the communication between OSB and SOA servers at the transport level.
Here are some couple of blogs that u might find helpful
http://beatechnologies.wordpress.com/2011/04/19/using-and-testing-complex-business-rules-in-oracle-soasuite-11g/
http://biemond.blogspot.com/2009/11/calling-soa-suite-direct-binding.html

Similar Messages

Third Party Systems Integration with SAP Business One

Different techniques are available in SAP Business One for Integration such as DI API, DI Server, B1WS, etc. In this blog article we tried to describe the architecture and details of different techniques through which ‘Third Party Systems Integration with SAP Business One’ usually happens
Third Party Systems Integration with SAP B1 - APPSeCONNECT

Hi,
Thanks for sharing such excellent blog with advantage and limitations.
Thanks & Regards,
Nagarajan

OAM 11g is supporting direct integration with E Business ??

Hi All,
Is OAM 11g supporting Direct integration with E Business suite instead of going through the OSSO ??
Please give me some pointers how to do the OAM 11g and E Business suite integration.
Thanks & Regards,
Vaasu.

Duplicate thread (please post only once).
Integrating E-Business suite with OAM 11g
Re: Integrating E-Business suite with OAM 11g

Outlook Express Integration with SAP Business workflow

Hi,
There is a user requirement for Outlook Express Integration with SAP Business workflow for PR approvals.
They want a link to be put in there outlook inbox so that the approvers can directly release the PR's worklist without seperately login into the SAP system. We are using 4.7 version.
I went through some ABAP material where i came across T-Code SCOT and Program RSWUWFML to schedule a job to pull worklists. But Iam not sure about this.
I want to know that whether this is possible in first place and if it is then how can we do it.
Regards
Vivek Nair

Hi ,
Thanks for the link..
but its not the one I have been looking for ragarding the mentioned scenario.
!)A User will be present in both outlook express and SAP system ,when we add a security group (SG *) in outlook expressthe user will get authorization on Portal screen.
2) After assigning a role in R/3 ,we should add the security group to that use for some access permission.
Could u pls explain me how the concept could be and Integration method.
Thanks in advance
I appreciate all your help.

Issue with executing Business Rules from Planning web

Hi,
We are using Hyperion Planning 9.3.0.1 and we keep getting an issue with the Business Rules. We get an error if we try to run the rules from Planning web. The same rules validates and executes fine if we run it from AAS. This issue gets resolved if we restart the Planning and RMI service. But this issue keeps happening randomly. Is there a permanent resolution to it? Is it a bug or I am missing something here?
Thanks and Regards,
Amol
Edited by: user638718 on Apr 7, 2009 5:20 PM

Hi,
Have you installed any of the patches for 9.3.0.1, I think it goes up to 9.3.0.1.09
One of the fixes was :-
8-665086601 (6588823) – When the Business Rules connection to the relational database is lost, Business Rules does not reconnect to it. To solve this problem, an optional property, HBR_CONNECTION_VALIDATE_TIME, was added to HBRServer.properties. This property specifies a time interval for checking the connection between Business Rules and the relational database. If the connection is not valid, a new connection is established. The time interval is specified in milliseconds and defaults to 300,000 (five minutes).
Though I know there has been more attention to fixing known issues on 9.3.1 than 9.3.0.1
Cheers
John
http://john-goodwin.blogspot.com/

Using third party jars with Oracle Business Rules

Hi
I am working on Oracle AS 10g release 2.
We are using Oracle Business Rules in integration with Oracle BPEL.
While using third party jars however, Oracle Business Rules end is facing errors.
Error during unmarshallingProvider com.sun.xml.bind.ContextFactory_1_0_1 not found
oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: com.sun.xml.bind.ContextFactory_1_0_1
Dependent class: javax.xml.bind.ContextFinder
Loader: oracle.xml:10.1.0_2
Code-Source: /D:/oracleasr3/lib/xml.jar
Configuration: <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\oracleasr3\j2ee\home\oc4j.jar
Can anybody help in figuring out where Jaxb jars(3rd party jars) are to be kept so that OAS access it?
We tried using the applib folder to load the jars but we are getting class loading errors.
When new instances are created, class loading is not happening.
Pls help.
Thanks
Kavya

Are you using Application Server Release 3 or Release 2? There are different versions listed in your mail.
I think you probably want to add this as a shared library via EM and then import the shared library to your application with the application's xml config files.

Help: Oracle data transition with enhancing business rules

The work referred here is sql load flat file to Oracle table. However, due to the possible data errors, the flat file may not be able to load to Oracle table totally. The type of errors involve like unique constraint, invalid characters etc. Instead of sql load direct to the destination table, I am planning to load to a temporary table. The temp table has flags to each potential field which needs to enhance the business rules. The diagram looks like:
Flat-File -> temp_table -> dest_table
Take an example:
temp_table with col_1, col_2, flg_1, flg_2
dest_table with col_1, col_2
temp_table will take all data from Flat-File with all varchar(x) fields.
What I plan to is to write stored procedure to move the correct data from temp_table to dest_table. If there are any errors, through a trigger to update the temp_table flags. If there are no errors, the record will move to dest_table and the corresponding records will be removed from temp_table. A serve package utilizing Oracle FORMS will take care of the error data.
I'd like to hear all suggestions before I implement this.
Any suggestions are greatly appreciated.
Thanks.
Jimmy

Hi Jimmy,
Another approach could be to move data from temp table to dest_table using [DML Error Logging|http://www.oracle.com/technology/oramag/oracle/06-mar/o26performance.html]
Or maybe even the [Badfile and External Tables|http://www.gennick.com/ETLandBad.html]
Regards
Peter

CCME integration with Microsoft Business Contact Manager

Hi,
Can anyone tell me, if a CCME can be integrated with Microsoft BCM such that when a call comes in details of the client pop up, should they exist in the Business Contact Manager.
Finding exact information is like find a needle in a hay stack.
Regards
LN

Hi Swinster,
Apologize for the late reply.
What is your current situation? As JS2010 stated, also in this KB article:
http://support.microsoft.com/kb/2101557
During the 'Specialize phase' of Sysprep, Sysprep.exe looks at the Last Modified Date of the ntuser.dat file for each user profile to determine which user profile to copy to the default user profile. However, the earlier cleanup functions of sysprep.exe
loads each Ntuser.dat file to make security ID (SID)generalizations. You cannot predetermine which user profile will be copied if more than one user profile exists.
How about we skip the copyprofile option?
Further, see if the following article would help to customise the user profiles settings:
Configuring Default User Settings – Full Update for Windows 7 and Windows Server 2008 R2
http://blogs.technet.com/b/deploymentguys/archive/2009/10/29/configuring-default-user-settings-full-update-for-windows-7-and-windows-server-2008-r2.aspx
Or we may consider seek help at the office outlook forum for the BCM deployment.
Best regards
Michael Shao
TechNet Community Support

Portal integration with E-Business and Discoverer 10g

Hello Everyone,
We have a R12 integrated with SSO/OID. We also have a standalone Oracle BI Discoverer 10g. We want to implement Oracle Portal here. One of the requirements of this project is to have a common home page for both E-Business Suite login as well Discoverer access. Right now E-Business Suite login is seperate and Discoverer home page is seperate (because it comes from a Standalone installation)
1) What are the benefits of having AS Portal 10g for end users ?
2) To begin with, we would like to go with the minimum portlets.
3) Is it possible to have a common home page for both E-Biz access and the Discoverer acess after Portal integration ?
4) Do you have some screenshots of how things look after Portal integration
-Thanks
Srinivas

Hi,
take a look in metalink Note:313418.1. :
"Using Discoverer 10.1.2 with Oracle E-Business Suite 11i"
Look in section 6 - post installation.
Follow the steps and have a very good luck.

E-Business Suite Integration with Oracle Business Intelligence

Hi,
To integrate E-Business Suite with Oracle Business Intelligence I have done all the configurations as specified in DocId. *552735.1* of Metalink. I have tested the configurations by logging in from EBS and navigating to OBIEE Presentation Services. I'm able to navigate with no errors but not able to view Subject Areas in the Answers link. I'm testing this with 'Administrator' user. When I directly login to Presentation Serivices with the Administrator user I'm able to see the Subject Areas.
Can anyone have idea what is the problem?
Thanks in Advance,

Hi,
Think I spotted the problem - probably specific to OBIA 7.9.5.
There is no "Authorization" initialization block: in previous incarnations (e.g. OBIA 7.9.4 and earlier I guess) there was a FndGetResp intialization block that assigned a value to the OBIEE "GROUP" system variable.
So I did the following and now I'm getting Subject Areas and Answers answers, but Dashboards still not working for me - maybe another issue.
1. Create system variable GROUP, temporarily with initialization block "Authentication"
2. Create initialization block "EBS Responsibility to Group" with query (note I've modified based on new session variable name RESP_ID goes to OLTP_EBS_RESP_ID in 7.9.5):
SELECT RESPONSIBILITY_KEY
FROM FND_RESPONSIBILITY
WHERE RESPONSIBILITY_ID = 'valueof(NQ_SESSION.OLTP_EBS_RESP_ID)'
Set the execution precendence to include EBS Security Context and EBS Single Sign-On Integration
NB: Had to create dummy variable GROUP_TMP for the "OK" button to come up, will replace that with real GROUP in next steps
3. Go back and edit System variable GROUP and change initialization block to EBS Responsibility to Group
4. Go back and edit initialization block EBS Responsibility to Group and remove variable GROUP_TMP
5. Created an OBIEE Group with name = responsibility key e.g. for my "SBA Administrator" responsibility, key = "SBA_ADMIN_KEY", so I created group named "SBA_ADMIN_KEY"
6. Made your new group (e.g. SBA_ADMIN_KEY) a member of the Administrators Group
7. Copy across rpd and restart sa / saw
Still awaiting response from Oracle Support ... so no guarantees this is correct and no guarantees that it won't break something else that Oracle suggests later!
Regards,
Gareth

Interactive activity with multiple business rule transitions

I use BPM standalone and studio 10g. I create two business rules.
Business rule 1: amount greater than 100.
Business rule 2: amount greater than 300.
An interactive activity has two business rule transitions and an unconditional transition. This activity is set to auto complete.
In an instance, I set the amount is 400. Then, the instance goes business rule 1 transition.
If I set this interactive activity to user select transition, the workspace lists 2 business rule transitions and let me to select one.

Hi Ye,
Eduardo brings up a good point. When you have multiple Conditional transitions leaving an activity, you can specify the order in which you want them to be evaluated by right mouse clicking the originating activity -> "Conditional transitions order". This is helpful because, even though several conditional transitions can evaluate as true coming out of a single activity - you still only want the work item instance to flow out of the activity via one of them.
It would be good if you could do the same thing when you have multiple business rule transitions leaving an activity, but unless this has been fixed on a patch that I'm not currently using - you cannot do this with business rule transitions. Unlike Conditional transitions, when you have multiple business rule transitions coming out of an activity and more than one evaluates as true, you have no control over the sequence you want them to be evaluated.
Guessing you've already done this, but I believe your options are to:
1) Avoid having multiple business rule transitions coming out of a single activity or
2) Do what Eduardo suggests and to make sure that none of the rules overlap (e.g. "amount > 100 && amount < 300") or
3) Do Eduardo's other suggestion and have a cascading list of Conditional activities. Each Conditional activity has one unconditional transition (going to another Conditional activity) and one business rule transition. If the business rule is true, you're done. If it's not true then you continue to the next Conditional activity which also has an unconditional transition (going to another Conditional activity if you have 3 business rule transitions you wanted to evaluate) and a second business rule transition.
Dan

Can not run the Business rules with Hyperion Business Rules Desinger

I created a business rules with Business Rules Designer,and validate is ok, but when I run it, pop a blank window withtitle "Run Error", how to solve it ? Thanks

I would export the rule to essbase and test it there. I should run and the log will tell you something. I would also look at the business rules log to see what it says.

How to incorporate table data with Oracle Business Rule

hello
I want to use table with data in Oracle Business Rule can i do it.
if yes please write how .
with regs
saleem

Hi,
like with coloring of cell according to value and so many.How to do that?
Answer is, you can't
Frank

How to work in RH9 when project is integrated with TFS and TFS server is down

My RoboHelp 9 project is integrated with TFS/Visual Studio. The server went down yesterday and won't be back up until late today.
If I open the project locally (rather than from Version Control), how do I eventually get the latest files (those that I've worked on locally) into Version Control?
Thank you.

Hi,
I use the following method:
1.       Open the project and disconnect from source control.
2.       Modify any files you need. Be aware that when you add/rename/remove/move files, the RoboHelp control files are modified too. (.apj and .fpj)
3.       When TFS is up, check out the files using team explorer. Do NOT overwrite local files. (Make a backup first.)
4.       Using TFS, check in all modified files. Do NOT check in the XPJ file. If you do, the project will lose its connection with source control.
5.       Thrash the local project.
6.       Get the latest version from the server.
Be aware that this requires that you know what you’re doing. Especially when control files are modified. When you only modify the content of existing topics and check the existing topic in, you should be fine.
Greet,
Willam

Netmeeting Integration with Sun One Portal Server 6.2

Hi,
we are trying to integrate MS Netmeeting with Sun one portal server 6.2,using netlet ,has anybody done similar things earlier .then plz help me,
or any other solution to call netmeeting from portal.

Suggest trying other forums, as we're specialized into Messaging Server, not portal nor Netmeeting

Integration with Corticon Business Rules Server

Similar Messages

Maybe you are looking for