Integration with ECC 6 and Xcelsius

Hi,
I would like to know if its possible to integrate Xcelsius directly with an ECC report.
For example, take the ALV data and 'send' it to Xcelsius in order to have an Xcelsius report.
I know that Xcelsius has (now), built in integration with BW queries, but wonder if that is proprietary with BW, or can the concept of integrating a report from BW work in ECC?
Please advise.
Thanks.
JP

Hi,
in case you would like to build an Xcelsius dashboard on top of ERP data you can use Crystal REports to connect to the ERP system  (see here: /people/ingo.hilgefort/blog/2008/03/23/businessobjects-and-sap-part-4) and then you can use Live Office to connect Xcelsius to a Crystal REports objects. see here:
XC, CR and LO Part 1 of 4
/people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 2 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 3 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 4 of 4
/people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
In regards to an ALV - there will be an integration with Crystal Reports but not for Xcelsius and keep in mind that an ALV is a push model and is only available when the transaction is been executed.
Ingo

Similar Messages

  • How is the integration with ECC in SRM 7.0??

    Hi,
    Working with SRM 5.0 or 5.5  the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts,  we only use the RFC´s and the abap programs.
    Is the same behavior with SRM 7.0?????
    Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
    Thanks

    SRM70 is closely integrated with XI for transferring docs between ECC and SRM.  SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
    Thanks,
    Jagadish

  • CRM 3.0 integration with ECC 6.0

    Hi all, I wanted to confirm if CRM 3.0 can be integrated with ECC 6.0
    If yes, then which support pack,etc. will be applicable and what all issues could be encountered in integration?
    Thanks in advance.

    Hi Animesh,
    just to be clear.
    the CRM and the backend ECC60 are communicating via  Plug -ins
    you can read more information here
    http://service.sap.com/r3-plug-in
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000601131&
    The other  SP level of the systems (BASIS etc.) are independent.
    Once you could conect the systems at basis level. You can begin your work at
    Application level.
    Whether you can have problems here please ask the CRM Gurus in a separate therad in other forum.
    I Hope I have answered all of your questions.
    Kind regards
    Imre Takácsi-Nagy
    Senior Support Consultant II.
    SAP Global Support Center Austria
    Netweaver WEB Application Server ABAP / JAVA

  • CRM 5.0 Integration with Twitter and facebook

    HI Experts,
    i am working with SAP CRM 5.0 version,
    My existing client want to set up SAP CRM with twitter and Facebook specially customor services ,
    Does SAP CRM 5.0 has tight integration with twitter and facebook ,
    if yes will you please share iinformation in terms of
    1)Effort Estimation :manpoer
    2)Costing details 
    Thanking you in advance
    Pravin shete

    @sherrysarath:  Could you share some documents to understand how standards works for this issue? And if there aren't standards requirements, could you share your custom solution.
    @pravin wipro : Could you explain what are your requirements?

  • DMS integration with PP and PS.

    Hi SAP PLM experts,
    I would like to know how mySAP PLM's DMS module  is integrated with PS and PP module.
    Any small scenario with T codes and configuration help is highly appriciated.
    If you guyz have any documents/materials for this question, please mail the same to sudhu03 at gmail dot com.
    Thanks in advance,
    S.Achar.

    It is only through the object linkwhich you provide.
    In the business perpective, we attach the contract documents, design drawings and other doucuments to the project for ready referance.
    You can create the DIR directly from PS transaction or you can create it in DMS and attach it to the Project.
    We do have the red lining to identify teh changes reqd in the document.

  • Quality Center 11 (ALM) Query - Integration with Subversion and Jenkins

    Hi OHPCPaT Forum,
    Are there any restrictions to enabling the QC integration with Subversion and Jenkins when the QC server is a SaaS cloud instance? Is there any additional config I should be aware of?
    Thanks in anticipation

    Hi,
    Yes all the users are facing the issue. Please find more details for the issue.
    Currently we are upgrading Quality Center 10.0 to 11.0 with HP Enterprise Integration module for SAP applications. The project successfully upgraded from QC 10.0 to 11.0 but there are some error popup for the project for which Application Module and Enterprise Integration for SAP applications Version 2.6 was enabled
    Quality Center Details:
    HP Application Lifecycle Management 11.00
    ALM patch level: 07
    Quality Center 11.00 Enterprise Edition
    Component     Build
    OTA Client     11.0.0.6051
    User Interface     11.0.0.6051
    WebGate Client     11.0.0.6051
    Test Run Scheduler     11.0.0.6051
    Execution Flow     11.0.0.6051
    Site Administration Client     11.0.0.6051
    Extension Version     
    Enterprise Integration for SAP applications     2.6.0.3232
    Sprinter     11.0.0.6051
    Application Model     2.6.0.917
    Installation Steps followed:-
    1.Installed HP ALM
    2.Installed Patch Service Pack 2 (Patch 2,3,4)
    3.Installed Patch 6
    4.Installed Patch 7
    5.Installed the Extensions HP Enterprise Integration module for SAP applications using Extension Deployment Tool by following the steps provided in the Addin Page
    6.Created new project in HP ALM
    7.Login to the project (no issue)
    8.Enabled the Project Extensions
    9.Login to the project (able to access the project but error message is popup when we access Test plan and Defect module)
    Note: There is no error when we access the project for which the HP Enterprise Integration module for SAP applications EI not enabled. QC 11.0 is not integrated with any tools.
    Let me know is there any step we missed or we need to do any manual steps we need to do before enabling EI

  • Exchange 2013 owa integration with ADFS and cooexistance with exchange 2007

    Team,
    I have successfully integrated adfs 3.0 and Exchange 2013 owa and ecp.  However, we have a coexistence environment with exchange 2007.  When you access owa, which then redirects you to adfs, sign-in, and then get redirected back to owa. If your
    mailbox is still within exchange 2007, you get a blank login page.  If you mailbox is in exchange 2013 then you successfully get the owa page for 2013.  The problem is that all exchange 2007 mailbox users get blank pages at login. So I have determined
    that exchange 2013 cas is not doing the service location lookup on the mailbox to determine if a redirect to the legacy owa address is needed.  Is there a configuration setting that I might be missing? Or does the integration with adfs and owa not support
    the much needed mailbox lookup for a coexistance environment?  A side note: if we enable FBA with owa, both login scenarios work just fine (legacy and new 2013). The legacy namespace has been created, and applied to the exchange 2007 urls.  

    Hi,
    Try using AD FS claims-based authentication with Outlook Web App and EAC
    http://technet.microsoft.com/en-us/library/dn635116(v=exchg.150).aspx
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Steps: SNC (Supplier Network Collaboration) Integration with ECC through XI

    Hi,
    Has anyone worked on the SNC(Supplier Network Collaboration) integration with SAP ECC via SAP XI.
    Could you pls share any documentation related to this. And also could anybody tell me the setup required to go ahead with the integration.
    Thanks,
    S

    Hi Xavier,
    SNC integration with XI has predefined mappings. So ask your basis guys to download the XI content for SNC using with PI. Once they deployed you will have a builtin predefined content in XI. Within the predefined content mostly they all are xsl mappings.
    If your requirement is with the standard idocs then you can use them directly. Else if their is customization they you may need to change the mappings according to your requirements.
    Also check this help:
    http://help.sap.com/esoa_scm_snc2007/helpdata/en/index.htm
    Regards,
    ---Satish

  • Sourcing integration with ECC using PI (percentage rebate scenario)

    Hi Experts,
    Sourcing - OP 7
    ECC - configurations done for rebate conditions as mentioned in standard configuratin guide
    PI - SP02 patch 0
    We are publishing percentage rebates in Master agreement from sourcing to ECC to create Online Agreement using standard predelivered content for PI from SAP, however ECC returns error in RFC response mentioning
    No currency code found for ISO code P1 in field HEADER_CONDITION/CURRENCY_ISO
    I checked PI content & I see for % rebates, field HEADER_CONDITION/CURRENCY_ISO is always populated in PI with P1.
    What are the next steps to be done in ECC or in PI to overcome the mentioned error.
    Any pointers will be appreciated, Thanks.

    Hello Jeet,
    I would suggest to check first that in both your SAP ERP and SAP Sourcing an ISO Code P1 for percentage exists. Further I would check if a rebate with an absolute amount works fine (also create multiple amounts and check if a scale is created in ERP, just to ensure that it works in general). E.g. check if the price condition/condition type exists and is configured correctly in ERP.
    If that all looks good you might want to check the ERP transaction BBP_ES_ANALYZE. I recently created a SDN blog about some tips and tricks, it also explains this transaction, please see ERP integration with SAP Sourcing – tips and tricks Maybe the error message(s) in this transaction will help you to better understand what is going on.
    Hopes that will help you
    Markus

  • Pro/E integration with ECC 6.0

    I want to integrate Pro/E with ECC 6.0 in order to transfer/exchange engineering data such as materials, BOMs, engineering changes, documents, etc.
    Does anyone know of Pro/E functionality or a 3rd party product that does this sort of thing?
    Kind regards,
    Rex L. Farris

    A direct interface is developed by .riess GmbH and SAP.  It is SAP certified and supported by SAP.
    For more information,
    Go to <a href="http://service.sap.com/plm">http://service.sap.com/plm</a>
    Life-Cycle Process Support -> Product Development -> Integration -> MCAD Integration -> Pro/ENGINEER

  • C4C integration with ECC 5.0

    Guru,
    My company is looking for implementing cloud for customer, but our backend system is running on ECC 5.0.
    SAP had strongly recommended us to upgrade our ECC before implementing C4C project.
    Through some reading, it seems that integration prerequisite is ECC has to be version 5.0
    Or there is any workaround to integrate (standard integration) C4C to ECC 5.0 through HCI? Like by applying or enhancing standard iflow that released for ECC 6.0?
    Thanks.
    Cheers,
    Jim

    Not sure where you have read that ECC 5.0 would be supported. The official SAP position is summarised in the table below. You can clearly see that some functionalities even depends on what EHP level you are at with ECC 6.0.
    SAP PI and HCI leverage the same iFlow content.

  • CRM2007 integration with ECC 5.0

    Hi All,
    Will appreciate if someone can send a document or link that can help me with ECC5.0 and CRM 2007
    Regards,
    Suren

    this is copied from the installation guide
    Prepare an OLTP Backend System:
    n SAP R/3 or R/3 Enterprise systems as well as ECC 5.0
    systems require the R/3 Plug-In 2004.1 with at least
    SP10.
    See SAP Note 704564 (R/3 plug-in:PI 2004.1
    installation/delta upgrade) and SAP Service Marketplace at
    http://service.sap.com/r3-plug-in
    n As of SAP ECC 6.0, the R/3 Plug-In is no longer
    required. New and extended interfaces for integrating
    SAP ECC 6.0 are directly contained in SAP ECC 6.0.
    [SAP ERP 6.0 <Technology> on <Operating System>: Database
    then it should be done as with any OLTP system.
    I've done a connection to a R/3 Enterprise 4.7 system and that worked fine.
    Follow the Best Practices documenation and you will be fine!
    http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm

  • Excel integration with Entry and Approval for SSM not working

    Iu2019m having trouble getting excel integrated with E&A for being able to enter large number of historic data points into a cube-built model u2013 Iu2019ve gone through all the docs several times and there is no good concrete explanation on how to do this. I keep getting the following error message:
    Error opening Excel Automation server can't create object. This can be caused by:
    1. - The application is not installed on your machine
    2. - The browser security does not support ActiveX scripts.
    3. - Your were prompted to run ActiveX and you said No, if that is the cause close all browser instances and reopen.
    However, I've done the following:
    -          Iu2019ve installed the excel add-in on both the server and my local machine, and Iu2019ve enabled the add-in part in Excel on my local machine.
    -          The browser security is definitely set to accept all active X scripts
    -          I am never prompted to run activeX when I select u201CHistorical Datau201D within entry/approval. I just get the above error message.
    -          Iu2019ve flushed cache and restarted listener several times.
    What am I missing? I donu2019t see it in any of the docs.
    Thanks!

    Robb,
    Looking at what you've done, there doesn't seem to be an obvious answer. The best suggestion I can make is to fill out a support ticket on this. There must be other factors at work here that will require a deeper look.
    Regards,
    Bob

  • SAP XI 2 BI Integration with ECC 6.0

    Dear all,
    we are planning to do XI integration between ECC 6.0 to BI
    1) How to Get the BI Standard data from ECC 6.0?
    2)We are planning to integrate Standard BI reports with ECC 6 0 through XI.
    Please sugget the scenario for integration between ECC 6.0 to BI through SAP XI.
    Thanks In Advance.
    Mahesh

    Hi Mahesh,
    Please go thru these links
    To push data from BW to XI, please check
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20push%20data%20into%20bw%20from%20xi.pdf
    To send data from XI to BW please check
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate%20bw%20via%20xi.pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
    XI-BI Integration unsing RFC
    Pushing data from BI to XI using RFC Adapter
    https://forums.sdn.sap.com/click.jspa?searchID=17734474&messageID=5878682
    Thanks,
    Shweta

  • SocialMiner Integration with Linkden and Whatsapp

    Hi Everybody,
    One of my customers wants to integrate Cisco SocialMiner with Linkden and Whatsapp but I did not find integration information in product guides. One of my team members told me that we can achieve Linkden integration through REST APIs, but I am still doubtful because it was not mentioned anywhere in the documents. So please guide me, how can we achieve it.Thanks in advance 
    Cheers :)
    Regards
    Qamar Khan

    I had the client implement a DMZ and have part of the public IP block be assigned to the it. We then placed the SocialMiner server in the DMZ and only opened the necessary ports from the OUTSIDE to DMZ and from the DMZ to the INSIDE. PDI said that doing NAT to the SocialMiner server is not currently supported. Also, we are doing this without setting up the optional proxy server.

Maybe you are looking for