Integration with last

A simple request, can the Creative management software / firmware in our Zens make positi've steps towards sending play count information from our Zens to the last.fm website?
Commonly this process is known as Audio Scrobling and in this case could occur when we connect our Zens to our computers. Some iPods already do this through an iTunes plugin for the last.fm software and there are a lot of Zen owners screaming out for such a feature in mediasource /nomad explorer or the basic MTP interface in Windows. I would assume the folks at last.fm would be happy to hear from a new partner such as Creative.
Learn more about last.fm:
http://www.last.fm/about/
Having this feature may keep Creative fans who highly value last.fm, from switching to the iPod and further integration from creative such as downloading calendars from the last.fm site to our zens would be awsome. Apple should be thinking along the same lines too, how to use the calendar.Message Edited by duracell80 on 08-3-200703:58 PM
Message Edited by duracell80 on 08-3-200704:0 PM

Thanks for your answer,
here you find two files attached. One is the original and the other one is a vi which includes the peaks30 routine and was written by myself.
I found the peaks30.llb on a ni ftp page.
Attachments:
peaks30.llb ‏109 KB
integrat.vi ‏144 KB

Similar Messages

ECC 6.0 integration with Microsoft Dynamics CRM

Hi All
I am working on a ECC 6.0 integration with Microsoft Dynamics CRM. I need to send the customer master data, va01/va02, vl01n/vl02n/ vf01/vf02 to CRM system. One option I have is to send in the form of IDOC with TRFC - TCP/IP. But looks like this needs a middleware like Biztalk.
Is there a way I can send this data using a Internet service in ECC 6.0 ??? As this would cut the cost of the Biztalk.
I really appriciate your thoughts on this. We don't have XI either.
Thanks a lot
Van

HI Van Dan Jan,
We have just implemented integarion of SAP with Microsoft stack (Microsoft CRM, Share point and Axapta), But in all integration BizTalk as a middleware used.
There is two way requirements :
1. whenever Most of the control are at the Microsoft level like : Customer creation, Creation of orders, which need to be synchronus activity we have used RFC which internally calls BAPI. (So SAP adapter Configured at BizTalk). and whenever Biztalk receives request file from CRM or share point to there location they call SAP RFC's.
2. When DATA is needed from SAP to microsoft stack like to syncronize the missing transaction like customer pad and all.
Scheduled job at BizTalk end which call SAP to get the DATA via RFC mode :
In SAP we have two things
1. if DATA size is small (below 2 MB) like in last 1 hrs what are the sales contract created in SAP that need to updated in Microsoft other system than Biztalk will trigger a job at 1 hr interval or on deemand to get the detail which directly we pick from data base or using BAPI to get the detail via RFC.
2. If Data Size is large (more than 2 MB) like total transation happened in a day for all customers: then we wriiting the data in OS or application server and that job also get initiated from Biztalk end by sending any parameter to SAP.
advantage of using BizTalk is most of the control you can give it to them so they can run there job on deemand basis.
There is a something known as web service we can use to avoid Interfacing tool, but I dont have much Idea about that,
and please check how many interfacing point is there with SAP in your project, because if Interfacing points are more then I think it is not good to write a web services for so many things.
do let me know if you need further information.

Integration with MS VC++ DLL

Dear Forte - colleagues
I've got the following questions to clarify. They are mainly
regarding integration with External Systems.
1. To invoke my C function from Forte, I've created a project that
wraps C function, configured this as a library and made distribution
without autocompiling. (We are not able to use AutoCompile option). So
I have to build a DLL manually. I created a MS VC++ project
containing the following files:
1. fcinter.cc - is generated by Forte
2. fcinter.cpp - my C functions
3. Forte libraries fortent\install\lib\*.lib
Although FCInter.DLL has been compiled and linked successfully, but I
get the following diagnostic:
System Error: The specified procedure could not be found.,
loading the symbol 'fcint_GetScope' from the library
'c:\fortent\userapp\fcinter\cl0\fcinter.dll
However this function is seen by Dumpbin /EXPORTS.
I suspect that something is wrong in MS VC project settings. My
questions are: Which settings of MS VC++ project should I use to make
this function visible for Forte? Or what should be the command line
to run CL command line compiler?
2. And lastly, may be it seems funny but we cannot find the 'Release
Notes' doc in Forte manuals nor in the installation CDs. Can somebody
send it to us as email attachment? Mainly I need information about
interaction with C++ compiler on WinNT platform. We are happy
possessors of Forte 3.0.D.0.
Thank you in advance for your help.
Gleb Tulukin
IBC

I had to download the 64 bit librfc32.dll from SAP software download center as outlined in note 413708.
Please note that the librfc32.dll installed as part of SAP GUI is 32 bit. Hence, I was getting the BadImageFormat exception.

Autodiscover not working correctly when Office 365 integrated with Server Essentials 2012 R2

Hello!
This last weekend I setup our server as new and to ease the creation of users, integrated with our Office 365 (which to this point has worked fine) and imported the users. This had a somewhat unexpected side effect in that the import used the email address
as for the user forename and then synced that change back to Office 365 and so needed to enter this information back in on the dashboard which synced back to Office 365. This may or may not have any relevance to our issue below.
I should also point out that we have our own domain name so within the original Office 365 setup we had just one .onmicrosoft.com user with all the rest setup with our own domain name.
At the weekend when it came to the client install, Outlook (2010 or 2013) would fail on the autodiscover with it asking again for credentials but critically displaying a server name of .contoso.com rather than the office365srvr.contoso.com . As I mention,
Office 365 had been operating fine for some time and DNS records where checked and have been set for sometime. I spoke to Office 365 support and after a while come up with a temporary solution (so that I could complete the client installs) of assigning each
user a onmicrosoft address, using that in the new account wizard to pick up the server correctly and then signing in the the Office 365 .contoso.com credentials.
This worked OK to get us past the weekend (although I am having to reset up profiles on quite number of users where they get disconnected but with no credentials box appearing) but isn't a solution. The clients do not see public folders or their archives
and of course we don't want to keep having to reset the profiles.
I'm think that there must be something in the internal network that needs reconfiguring but I don't know what. I have tried pointing the client to an external DNS server just in case the internal DNS server was throwing the autodiscover out but this has
made no difference.

Ah - solved my own problem.
Despite the domain DNS record looking OK and the Office 365 Portal domain checker not highlighting any issue, it looks as though the autodiscover is picking up an imap account provided by the web host.
I've added an alias on the local DNS server to point to the Office 365 autodiscover server and this has solved the problem.

EBP Integration with thirdparty software

Hi SRM Gurus,
i know the procedure to how to replicate vendor/Material master data from R/3 to SRM server.But i dont know how to replicate a Vendor/Material Master data from Non sap Systems like Oracle system into SRM server. i Know that there is some Middleware systems like CRM middleware will be used.
Please let me know the Step by step procedure to replicate Vendor master data from ORACLE to SRM.
Thanks in Advance,
Kishor.

Hi Ajith,
PM and PS integration with SRM is possible in 2 ways:
- A scenario exists to get the PM order enriched in SRM, in this scenario the user can add items in the PM order from catalogs or manually. The additionnal items are sent back in R/3, there is no possibility of changing or deleting items that exist already in the PM order in R/3.
This scenario still exists in the system, but has been 'abandoned' by SAP.
- The other option is the 'Plan Driven Procurement': Making this customizing, you can integrate in SRM the PR from an SAP system (so it is after in the R/3 PM orders process, and is not limitated to PR created from a PM order). This PR can be integrated in SRM either as a requirement in the Sourcing Cockpit, or as a incomplete PO.
So please be more precise in the kind of integration you're looking for, the R/3 and the SRM versions you use (the second scenario has been enhanced in the last versions).
Hope it helps.
Vadim

Dispute Case Integration with FI-AR

Hi all,
Does anyone know whether there is a standard scenario to be able to create a dispute case in the Interaction Centre and for this to transfer to FI-AR or FSCM. In the documentation it seems to indicate that this is only available with FI-CA.
Paul

Hi,
Thank you very mutch for the information , I have check no 1 and that is OK, regarding number 2, I would like to do some settings in our IDES environement to try some features, but there the "Integration with Contract Accounting" is set, as I read this can not be deactivated, is there any meens for this.... please advice in that case.
Reagarding the last issue, we are not using Agency Business and SRM functionality, hope that will minor the non working part. Thy do not need contract agreement either.
BR
Eli
There are a few things you have to do, if you want to use FI-AR instead of FI-CA.
1. Replicate BP in CRM to customer in ERP. Set up FI-AR as active accounting in IMG -> CRM -> Master Data -> Business Partner -> Business Agreement -> Define Basic Settings.
2. Deactivate feature ACC_FICA (Integration with Contract Accounting) in Billing engine via IMG -> CRM -> Billing -> Configure Application.
You should note that lot of Leasing functionality with CRM releases higher than 5.0 are based on FI-CA as the active accouting system. These may not work if you use FI-AR.

Ask the Expert: C-Series Integration with Cisco Unified Computing System Manager

Welcome to the Cisco Support Community Ask the Expert conversation. This conversation is an opportunity to learn and ask questions about Cisco C-Series Integration with Cisco Unified Computing System® Manager (Cisco UCS® Manager) with Cisco experts Vishal Mehta and Manuel Velasco.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (Cisco IMC). When a C-Series rack-mount server is integrated with Cisco UCS Manager, the IMC no longer manages the server. Instead you will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager command-line interface (CLI).
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management. The following are the connectivity modes:
Dual-wire management (shared LAN On Motherboard [LOM]): Shared LOM ports on the rack server are used exclusively for carrying management traffic.A separate cable connected to one of the ports on the Payment Card Industry Express (PCIe) card carries the data traffic.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco UCS Virtual Interface Card 1225 (VIC1225) connects one cable that can carry both data and management traffic.
Direct Connect Mode: Cisco UCS Manager Version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
Vishal Mehta is a customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE® certification (number 37139) in routing and switching and service provider.
Manuel Velasco is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco UCS, Cisco Nexus 1000V, and virtualization. Manuel holds a master’s degree in electrical engineering from California Polytechnic State University (Cal Poly) and CCNA® and VMware VCP certifications. Remember to use the rating system to let Vishal and Manuel know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center, under subcommunity, Unified Computing, shortly after the event. This event lasts through May 23, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Sebastian,
The different modes of connecting C-Series with UCSM come into play depending on the type of infrastructure you already have along with C-Series and NIC model.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (CIMC) .
Powerful features provided by Cisco UCS Manager can be leveraged to manage C-Series server by integrating C-Series Rack-Mount Server with UCSM.
This not only gives you rich-feature set but also one management plane to operate UCS-B Series Chassis and UCS-C Series Rack Server.
You will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager CLI.
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management.
The following are the connectivity modes:
• Dual-wire Management (Shared LOM):
Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0100.html
This mode is recommended when you have C-Server which does not have or cannot support VIC 1225 card (such C-200 server)
• SingleConnect (Sideband):
Using Network Controller Sideband Interface (NC-SI), Cisco UCS VIC1225 Virtual Interface Card (VIC) connects one cable that can carry both data traffic and management traffic.
This feature is referred to as SingleConnect.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_011.html
This most recommended Integration model when using FEX and VIC 1225 card
• Direct Connect Mode:
Cisco UCS Manager release version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
This mode will eliminate the need for FEX module as Servers are directly plugged into the base ports of Fabric Interconnect
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html
Please let us know if you need more information. Thank you!
Thanks,
Vishal

ISE integration with Mobile Device Management ( MDM ) help required

Dear Techies,
     Am here bring to your notice an different issue and no much resources to support even in PEC or Cisco Document.
     We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Setup Brief :
=========
      Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory
     Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
Activity Brief:
=========
     As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
Clarifications Required
================
Wired Scenario - Require some configuration / steps on how to carryout posture for the guest wired users i.e. LAPTOP.
Wireless Scenario
MDM can be integrated to ISE ?
How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
Is MDM will do client provisioning or ISE should do ?
Is MDM send or update patches of Mobile Devices ?
As of now these are the scenarios, kindly revert if any good documents to show this or share your expertise on the Integration Part.
Thanks for Reading...
Arun

I would like to avail your valuable inputs to understand on the Client provisioning part for the Mobile Devices/ Laptop. I understand from your reply that MDM integration is not available in the current release ISE 1.1 - That is correct.
Kindly let me know your views or any documents on the following scenarios with the current release in mind
1. User with Mobile devices connecting to Wireless ( both Employee and Guest ) , How the Flow differs for the Employee and Guest. How the client provisioning is done ( i.e. Like Posturing or Compliance Check ).
The posturing and compliance check is done based on the user authentication information (i.e. AD memberOf vs Guest user) combined with the users endpoint (windows, mac osx, or a mobile device), ISE then has a few decisions to make based on the authorization policies. For example, if a Domain User coming from a Windows 7 machine joins the network, then can either use the nac agent, or the web agent. Then you can scan for registry settings, file settings, program requirements, hotfix compliance...and the list goes on. If the user fails a check then you can either assign an acl for the user so they only have guest access, or you can place them into a remediation vlan the options are entirely up to the requirements and however the solution is implemented.
2. User with Laptop connecting to Wireless ( both Employee and Guest ). How the client provisioning is done ( i.e. Like Posturing   or Compliance Check ).
Guests are usually redirected to the guest portal which they authenticate and their user group falls within the Guest container that is on the ISE internal database, that is usually coupled with an authorization profile that grants them internet access. For the client provisioning, that is usually done based on the operating system, via profiling (dhcp, and user agent string., netmap...etc) and can be fine tuned for all laptops or to a specific set of users based on their group membership.
3. What are advantages of having ISE also in place for Mobile devices, since most of the Mobile related tasks ( like Authentication, Authorization, Profiling and Posture ) are carried out by MDM. I am checking for the significant advantage of having ISE for Client network having only Mobile devices. Kindly clarify.
Currently the advantage of Cisco ISE is that it supports profiling within wireless and really fits well within a network that has mostly Cisco products since they are all part of of the Borderless security initiative being driven on the backend. The product teams for wireless, wired, security (vpn..etc) and ISE are pretty close in building their solutions so that you can get connected with any device any where (sorry for the sales pitch). The latests wireless code is improving and is going to have support similar to the ios sensor for wired devices where dhcp, cdp, and other attributes can be sent in the radius packet for better profiling decisions. With integration for an MDM platform coming soon, and also support for TACACS rumored (have to verify with your account rep) you have options that really stand out from a unit that only supports MDM. Cisco ISE also comes with a wireless product ID so that makes the budget work when it comes to deploying ISE if you arent looking for enforcement on your wired devices.
4. Do you recommend 802.1X Authentication to use for the Employee and Contractor? The Guest user authentication as Open ?
For internal users and vendors the best option by far is dot1x, almost all operating systems are capable of performing dot1x and the 1.1.1 MR has a piece now that can provision the supplicant for the users, by using scep to enroll certificates or configure peap settings.
There is a feature within the guest portal that allows you to statically assign guests into endpoint group, that feature is called device registration web authentication. It seems like an open network but uses mac filtering to assign these devices to an endpoint without requiring users to enter any credentials. They are presented with an AUP page, once they accept their mac address is mapped to the endpoint group
5. How can we ensure the Encryption of traffic from the Guest user to the NAD ( Network Access devices ) ?
This may be a wireless question but I am sure the encryption is done using AES and using dot1x as the key management here is a brief background for this - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml#L2
You can also use the anyconnect client which can provide macsec which is layer 2 encryption for wired - http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html
6. We are also looking for VDI ( Citrix, VMware ) solution for the client ( both Employee and Guest ) , how ISE can play a role in securing the VDI environment.
For most thin clients you can perform dot1x authentication on the device itself, however that is something the manufacturer will have to support. This is a little gray for me.
7. Is that any integration required with Citrix or VMware. How the VDI can be offered based on the User role ( i.e. Employee, Contractor or Guest ), since Guest database is available only with ISE, how the checks are made from the VDI environment.
IN ISE there is an identity sequence which can authenticate users in AD first, if the user is not found then it can look in the internal database.
Our solution demands MDM in the integrated solution, As on today ISE cant be integrated with MDM. so what kind of solution we can propose to have MDM and Cisco ISE .Do the clients now enter the network should have already installed the MDM agent (or) any other way of pushing the same to the Client.
Today there is no integration between the devices, the last release time I heard was December for this feature. However it would be best to confirm with your Cisco Account rep on this issue.
Thanks,
Tarik Admani
*Please rate helpful posts*

ADF Integration with BPEL

Hello,
I am new to BPEL. I am working on a sample .
I am working on ADF Integration with BPEL process.
I have an ADF Screen displaying data from an EMPLOYEE table in HR Schema . It has a button called "Update". I need to call a synchronous BPEL process on click of "Update" . This BPEL process will take the selected employee information as an XML input and update the last name to the first name as the response.
I have some doubts in that :
1. How to pass an XML Schema as input parameter to a BPEL process ? Can you please let me know some sample applications ?
2. I am creating a web proxy for the BPEL WSDL (created above) and my "Update" button is binded to a method which is calling the BPEL process.
How can i pass my XML input as the argument of the method to invoke the BPEL process ?
Thanks
Nutan

When using a web service proxy, you need to pass the data as an object, which' structure is defined in the web service proxy wrapper classes.
When you've defined a data control for your bpel process, you can just drag and drop the 'initiate'/'execute', your operation and bind this to the update-button.
When working with the proxy client, you need to populate your java class objects with the employee-object, this can be done in a backing bean or managed bean in your adf faces application.
For more information you can always have a look at my blog where I've provided an explanation about the different possibilities of interfacing adf with SOA.
Kind regards,
Nathalie

Siebel new LDAP adapter integration with BI Publisher

Hi All!!
We have configured our Siebel (8.1.1.3) security adapter with LDAP. BI Publisher is using Siebel security model.
We had to clone our AOM (fins_esn which is using the security adapter LDAP) to finsxx_esn because we are migrating the AD 2000 to 2008 (we are also changing the domain). The roll out will last 2 month, users will be migrated by branch, it wont be a big bang.
We have to generate a new LDAP security adapter to authenticate users who are logging to finsxx_esn to the AD 2008 (AD 2008 is on a diferent domain than AD 2000. This is working for application autehtication, no problems found here)
On a standalone environment report generation is working. But for a distributed environment (1 AOM, 1 NAOM, 1 Web Server) is not working.
Does anyone knows how to integrate to BI Publisher when you have two LDAP security adapters on Siebel Application? Or is there any authentication method to use instead of "Siebel Security" so as to achieve this?
Regards

We actually ran into a similar problem where I work. I created a support web ticket for our issue and the response is that BIP 11G is not supported for integration with Siebel 8.1, or any other version for that matter. Oracle is currently working on a fix to integrated the latest version of Siebel with BIP.
There advice to me was to downgrade to BIP 10G for the time being.

Integration with MQ 6.0

We have a requirement to integrate Oracle BPM with MQ version 6.0. The trigger point for instance creation would be the messages subscibed from MQ. Please let me know if there is any example showing the integration or any helpful documentation. Thanks in advance.

Hi,
I don't know of any documentation, but here are the steps a friend documented a couple years ago:
The MQ installer makes some changes to the environment variables, so restart Windows to ensure current settings are used.
1) Start the MQ Queue Manager
To start the queue manager, launch the WebSphere MQ Explorer (Start->Programs->IBM WebSphere MQ->WebShere MQ Explorer). Right-click on the queue manager and select Start:
2) Enable WebSphere MQ Publish/Subscribe (i.e. JMS Topic) Functionality
WebSphere MQ does not support JMS Topics out-of-the box. To enable this functionality, you'll need to do the following (QM_beaee06 is the name of my queue manager, be sure to use the correct queue manager name for your installation):
REM -- This assumes you've installed in the default MQ directory
PROMPT> cd C:\Program Files\IBM\WebSphere MQ\bin
REM -- This will check the broker status. After installation it should be inactive
REM -- IF YOU GET A DIFFERENT MESSAGE, BE SURE THE QUEUE MANAGER IS RUNNING
PROMPT> dspmqbrk -m QM_beaee06
WebSphere MQ Publish/Subscribe broker for queue manager QM_beaee06 not active.
REM -- Start the broker
PROMPT> strmqbrk -m QM_beaee06
WebSphere MQ Publish/Subscribe broker started for queue manager QM_beaee06.
REM -- Now we can verify the broker is running
PROMPT> dspmqbrk -m QM_beaee06
WebSphere MQ Publish/Subscribe broker for queue manager QM_beaee06 running
REM -- Last, we need to run a WebSphere MQ script to enable publish/subscribe
PROMPT> runmqsc QM_beaee06 < ..\Java\bin\MQJMS_PSQ.mqsc
8 MQSC commands read.
No commands have a syntax error.
All valid MQSC commands were processed. 3) Create a Sample Queue and Topic
While you can use WebSphere MQ Explorer to add destinations using a GUI, it's quite easy to do it from the command line:
REM -- This assumes you've installed in the default MQ directory
PROMPT> cd C:\Program Files\IBM\WebSphere MQ\bin
REM -- This will launch an interactive shell where you'll enter the subsequent commands
REM -- Note that the runmqsc shell does NOT provide any prompts
PROMPT> runmqsc
define qlocal (ALBPM.SAMPLE.QUEUE)
define qlocal (ALBPM.SAMPLE.TOPIC)
end4) Configure the JMS Administered Objects in JNDI
WebSphere MQ makes it very easy to use Sun's File System JNDI repository, so that's what you'll use here (if your client already has a JNDI repository in place, it can be substituted here). Before configuring JNDI, create this directory: C:\JNDI-Directory
You'll also need to edit the JMSAdmin.config configuration file to specify your JNDI connection parameters – you can find this file in the C:\Program Files\IBM\WebSphere MQ\Java\bin directory. To use the file-based repository, ensure the following values are used:
INITIAL_CONTEXT_FACTORY=com.sun.jndi.fscontext.RefFSContextFactory
PROVIDER_URL=file:/C:/JNDI-DirectoryOnce the JNDI parameters are set, you're ready to launch the MQ's JMS Administration command line interface:
REM -- This assumes you've installed in the default MQ directory
PROMPT> cd C:\Program Files\IBM\WebSphere MQ\Java\bin
REM -- This will launch an interactive shell where you'll enter the subsequent commands
REM -- Note that the 'hostname' will default to 'localhost' and could have been omitted
PROMPT> JMSAdmin
InitCtx> define q(albpmQueue) queue(ALBPM.SAMPLE.QUEUE)
InitCtx> define qcf(albpmQCF) transport(client) hostname(localhost)
InitCtx> define t(albpmTopic) topic(ALBPM.SAMPLE.TOPIC)
InitCtx> define tcf(albpmTCF) transport(client) hostname(localhost)
InitCtx> end 5) Test WebSphere MQ with a Stand-Alone JMS Client
Use a generic JMS client to test. This enables you to quickly test connectivity to WebSphere MQ (or any other JMS broker). Always test integration with back-end services (whether it's a JMS broker or some other type of integration) from outside Oracle BPM before attempting it with the tool -- once it's working ouside Oracle BPM, it's typically trivial to get things working inside Oracle BPM.
6) Configure Oracle BPM to Use WebSphere MQ
Once you have successfully tested WebSphere MQ (or another JMS provider) using the stand-alone client, you can use the same configuration with Oracle BPM.
a. Verify the following Java libraries have been added as an external resource:
com.ibm.mq.jar
connector.jar
com.ibm.mqjms.jar
dhbcore.jar
fscontext.jar
providerutil.jar
The Java External Resource should not be marked versionable.
b. Verify the JNDI Provider is configured with the same configuration as the stand-alone client. The resource type is (somewhat confusingly) a J2EE Application Server and the security principal and credential are both left blank.
c. Verify the JMS Message Service external resource is correctly configured for the queue. It will lookup the Queue Connection Factory as well as the Queue itself using the JNDI resource previously defined.
d. Similarly verify another JMS Message Service resource has been configured for the topic. It too will use the same JNDI resource.
7) Execute the Oracle BPM Process
a. Add Global Automatic activities (one for the queue and another for the topic) that each create a new work item each time a message is received. The runtime properties settings for these should be respectively:
Global automatic type: "Executes when an event occurs"
Listener class: "Fuego.Msg.MessageQueueListener"
Component event types: "anyMsg: Java.Lang.Object"
and
Global automatic type: "Executes when an event occurs"
Listener class: "Fuego.Msg.TopicListener"
Component event types: "anyMsg: Java.Lang.Object"
The logic in the Global Automatic has:
componentArguments as Any[String]
componentArguments = [
"contextFactory" : "com.sun.jndi.ldap.LdapCtxFactory",
"providerURL" : "ldap://fgdal-test1:389/dc=fuegotech,dc=us",
"securityPrincipal" : "cn=root",
"securityCredentials": "password",
"factoryName"        : "cn=qcf1",
"queueName"          : "cn=q1"
logMessage "MQLIstener:: MQListener initialized with this arguments:\n" + componentArguments
    using severity = DEBUG
logMessage "MQ Message Received is " + arg.anyMsg using severity = DEBUG
processargs as String[String]
processargs["mqData"]=String(arg.anyMsg)
// this creates the instance in the process passing the message into the input argument "mqData"
result2 = ProcessInstance.create(arguments : processargs,argumentsSetName:"BeginIn")b. Deploy the process and start the server. Login to the Oracle BPM WorkSpace. Add a message to the queue and/or topic and the work item instance should show up in the Inbox immediately.
Hope this helps,
Dan

Integrating with Oracle EBS using XMLGateway issues

Hi all,
I'm trying to integrating with Oracle EBS using XMLGateway, and I meet some issues. Here are the steps I did.
1) Update DATA_MAP.xgm file and DATA_TEST.dtd file into XMLGateway repository
2) Define transactions in EBS client:
Party Type: Supplier
Transaction Type: Cat
Transaction Subtype: Dog
Transaction Description: test for cat and dog
Standard Code: OAG
External Transaction Direction: IN
External Transaction Type: Cat
External Transaction Subtype: Dog
Queue: APPLSYS.ECX_IN_OAG_Q
3) Define trading partners in EBS client
Operating Unit: Vision Operations
Trading Partener Type: Supplier
Trading Partener name: ****
Trading Partener site: ****
Company Admin email: [email protected]
... other transaction info defined in step 2)
4) Send inbound message using OTA send Inbound Page. It succeed.
a. The return page display status code 1000 with status discription OK.
b. From the transaction monitor, I can see the inbound message was processed successfully.
c. From the database, I can see that this inbound message first arrived in ecx_inqueue table, and then moved to ecx_in_oag_q_table. And last disappeared from the ecx_in_oag_q_table. That means XMLGateway process the inbound message in transaction queue successfully.
5) Send inbound message using SOAPUi. It failed.
a. The return page display status code 200. That means the inbound message has been sent to inbound message queue successfully.
b. From transaction monitor, I cannot see this request record.
c. From the database, I can saw that this inbound message first arrived in wf_ws_jms_in table, then disappeared. It didn't moved to transaction queue which I selected when defined transations, so I guess it wasn't processed by XMLGateway. Using the following SQL, but cannot find error reason.
select * from ecx_inbound_logs where process_id='******************'
select * from apps.ecx_error_msgs where error_id='*****'
I guess the reason is something happend to prevent inbound message to move from inbound message queue to transaction queue. So XMLGateway cannot process this inbound message.
From XMLGateway user guide, I understand that there are three kinds of inbound queues(ECX_INBOUND which OTA uses, WF_WS_JMS_IN which soap over https uses, WF_JMS_IN which JMS uses), does't mention what are the corresponding transaction queues? Can they share the same transaction queue? Also see from this user guide, ecx_in_oag_q (transaction queue) is only for ecx_inbound queue. But when I try to define a transaction in EBS client, it seems that only ecx_in_oag_q can be chosen. I wondered why my second senarios failed when I used the same transation and trading partner. The message already arrived at wf_ws_jms_in and then disappeared. Is that because I selected the wrong transaction queue when defining transactions? But it was really cannot select any other transaction queues there. Or I missed some steps when using SOAP over HTTP/S?
Appreciate you can give me some suggestions. Hope to hear your voice. Thanks in advance.

Hi,
Regarding the integration what type of integration you want.
Can you please elaborate?There are some integration tools releases by Oracle for the integration.
Regards
Pramod

Sharepoint Integration with SAP and Logistic

Currently we have been integrating our .net server with SAP and all the project management and document management are stored in Sharepoint.. this is for a logistic company that we have been working with last 3 years.. we would like to make sure any data
points \integration points that should be considered with SAP during the integration
thanks -Pal

Hi,
As I understand, you want to integrate SharePoint with SAP.
SAP SharePoint integration enables frequent interaction with SAP processes, which means that systems are constantly being updated with newer, more relevant data. This timely interaction helps ensure the reliability of business information, and strategic
decision-makers can depend on “one version of the truth” regarding the performance and deployment of the company’s global workforce. There is three methods combining SAP and SharePoint: SAP BI Connector, Duet Enterprise for Microsoft SharePoint
and SAP, SAP Netweaver Gateway Productivity acceletor for Microsoft.
These articles below will help you.
http://www.winshuttle.com/solutions-sap/by-function-task/sap-sharepoint/
https://www.youtube.com/watch?v=aUmWrOR_B1M
http://stackoverflow.com/questions/11113381/how-to-integrate-sap-and-sharepoint-by-sap-pi
Best regards,
Sara Fan

Remedy CMDB Integration with SCCM 2012

We are facing an issue with duplicate entries of Hostname after remedy is integrated with SCCM2012.We have created custom view in SQL database which mapped to remedy database.Below is the query used for the integration.Can I get any help on this?
SELECT DISTINCT
                      dbo.v_GS_COMPUTER_SYSTEM.Name0, CASE WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('3', '4', '6', '7', '15')
                      THEN 'Desktop' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('8', '9', '10', '21') THEN 'Laptop' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('1')
                      THEN 'VDI' WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 IN ('2', '17', '23') THEN 'Server' END AS Chassis, dbo.v_GS_PC_BIOS.SerialNumber0,
                      dbo.v_GS_COMPUTER_SYSTEM.Manufacturer0, dbo.v_GS_COMPUTER_SYSTEM.Model0, dbo.v_GS_OPERATING_SYSTEM.Caption0,
                      dbo.v_GS_OPERATING_SYSTEM.CSDVersion0, dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.TopConsoleUser0,
                      dbo.v_R_System.User_Name0 AS [Last Logged], dbo.v_GS_PC_BIOS.ReleaseDate0, dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.IPAddress0,
                      dbo.v_R_System.AD_Site_Name0, dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.DefaultIPGateway0, dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0,
                      dbo.Processor_DATA.Name00, dbo.Processor_DATA.Manufacturer00 AS Expr2, dbo.Processor_DATA.ProcessorType00, dbo.Processor_DATA.NumberOfCores00,
                      dbo.CH_ClientSummary.LastHW, dbo.CH_ClientSummary.LastSW, dbo.v_R_System.Last_Logon_Timestamp0, dbo.v_GS_COMPUTER_SYSTEM.Domain0
FROM         dbo.v_GS_PC_BIOS INNER JOIN
                      dbo.v_GS_COMPUTER_SYSTEM ON dbo.v_GS_PC_BIOS.ResourceID = dbo.v_GS_COMPUTER_SYSTEM.ResourceID INNER JOIN
                      dbo.v_GS_NETWORK_ADAPTER_CONFIGUR ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.ResourceID INNER JOIN
                      dbo.v_GS_OPERATING_SYSTEM ON dbo.v_GS_OPERATING_SYSTEM.ResourceID = dbo.v_GS_COMPUTER_SYSTEM.ResourceID INNER JOIN
                      dbo.v_R_System ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_R_System.ResourceID LEFT OUTER JOIN
                      dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP ON
                      dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.ResourceID INNER JOIN
                      dbo.v_GS_SYSTEM_ENCLOSURE ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_SYSTEM_ENCLOSURE.ResourceID INNER JOIN
                      dbo.v_GS_X86_PC_MEMORY on (dbo.v_gs_x86_pc_memory.ResourceID = .v_GS_COMPUTER_SYSTEM.ResourceID) inner JOIN
                      dbo.Processor_DATA ON dbo.Processor_DATA.MachineID = dbo.v_R_System.ResourceID INNER JOIN
                      dbo.CH_ClientSummary ON dbo.CH_ClientSummary.MachineID = dbo.v_R_System.ResourceID
WHERE     (dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.IPEnabled0 = 1) AND (NOT (dbo.v_GS_NETWORK_ADAPTER_CONFIGUR.DefaultIPGateway0 IS NULL)) AND (dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0 >=512)
Thanks,
Shijil

Thank you Nash for your help.
I tried with dbo.v_R_System_Valid as suggested, still the same result.Is there any way to filter duplicate computer name in this query?
Below is the query.
SELECT
DISTINCT
dbo.v_R_System_Valid.Netbios_Name0,
CASE WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('3',
'4',
'6', '7',
'15')
THEN 'Desktop'
WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('8',
'9',
'10', '21')
THEN 'Laptop'
WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('1')
THEN 'VDI'
WHEN v_GS_SYSTEM_ENCLOSURE.ChassisTypes0
IN ('2',
'17',
'23') THEN
'Server' END
AS Chassis, dbo.v_GS_PC_BIOS.SerialNumber0,
dbo.v_GS_OPERATING_SYSTEM.Caption0,
dbo.v_GS_OPERATING_SYSTEM.CSDVersion0, dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.TopConsoleUser0,
dbo.v_R_System.User_Name0
AS [Last Logged], dbo.v_GS_PC_BIOS.ReleaseDate0, dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.IPAddress0,
dbo.v_R_System.AD_Site_Name0, dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.DefaultIPGateway0,
dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0,
dbo.Processor_DATA.Name00, dbo.Processor_DATA.Manufacturer00
AS Expr2, dbo.Processor_DATA.ProcessorType00, dbo.Processor_DATA.NumberOfCores00,
dbo.CH_ClientSummary.LastHW, dbo.CH_ClientSummary.LastSW,
dbo.v_R_System.Last_Logon_Timestamp0
from
dbo.v_GS_PC_BIOS
inner JOIN
dbo.v_R_System_Valid
ON dbo.v_GS_PC_BIOS.ResourceID
= dbo.v_R_System_Valid.ResourceID
INNER JOIN
dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION
ON dbo.v_R_System_Valid.ResourceID
= dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.ResourceID
INNER JOIN
dbo.v_GS_OPERATING_SYSTEM
ON dbo.v_GS_OPERATING_SYSTEM.ResourceID
= dbo.v_R_System_Valid.ResourceID
INNER JOIN
dbo.v_R_System ON dbo.v_R_System_Valid.ResourceID
= dbo.v_R_System.ResourceID
LEFT outer
JOIN
dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP
ON
dbo.v_R_System_Valid.ResourceID
= dbo.v_GS_SYSTEM_CONSOLE_USAGE_MAXGROUP.ResourceID
INNER JOIN
dbo.v_GS_SYSTEM_ENCLOSURE
ON dbo.v_R_System_Valid.ResourceID
= dbo.v_GS_SYSTEM_ENCLOSURE.ResourceID
INNER JOIN
dbo.v_GS_X86_PC_MEMORY
on (dbo.v_gs_x86_pc_memory.ResourceID
= .v_R_System_Valid.ResourceID)
inner JOIN
dbo.Processor_DATA
ON dbo.Processor_DATA.MachineID
= dbo.v_R_System.ResourceID
inner JOIN
dbo.CH_ClientSummary
ON dbo.CH_ClientSummary.MachineID
= dbo.v_R_System.ResourceID
WHERE
(dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.IPEnabled0
= 1)
AND (NOT
(dbo.v_GS_NETWORK_ADAPTER_CONFIGURATION.DefaultIPGateway0
IS NULL))
AND (dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0
>=512)
Thanks,
Shijil

Cisco WAAS moibile integrated with Symantec Backup Exec 2010

Here customer requirement is to take backup of opened Database file .fdb
(Microsoft Dynamic Navision) integrated with WAN optimization (Cisco WAAS
mobile).
Problem is Cisco WAAS mobile is not optimizing Symantec backup process when backup job is running.
Please find attached files (WAAS mobile accleration status with symantec
backup process).
Customer is using Microsoft Dynamics Navision (ERP application).
WAAS mobile client is connecting and file copy is accelerating, but
symatec backup (beremote.exe) and Navision (fin.exe) processes are not
accelerating.
I added above processes in WAAS mobile server's acceleration list.
Please advise if any changes has to made in WAAS mobile server.
Regards
Prasad
Cell: 9000012355

Hi Prasad,
According to the screen shots provided the fin.exe process is bypassed due to Low Latency. From the admin guide this means:
Bypassed : Low Latency. The latency between the client and the application server is less than the latency threshold, which is 10 ms by default. This threshold may be modified on the Connection Settings tab on the Configure > Clients > Networking page.
Also, I see SERVER.exe process is going to the same server or subnet as fin.exe but is bypassed due to Pre-Existing connection.
Bypassed: Pre-existing Connection. When WAAS Mobile is started after other applications, the existing TCP connections associated with those applications will not be reset unless the “Auto Reset Connection” property has been selected for the process in the Accelerated Processes table, and hence, these pre-existing connections will be bypassed.
Lastly, I see bermote.exe is listed as Bypass Reason Unknown in one of the screen shots.
Bypassed : Reason Unknown. This message will occur when an attempt to reset a TCP connection associated with an application that has been configured to have these connections be automatically reset (via the Accelerated Processes table on the Configure > Clients > Acceleration page) fails.
Is this client actually accessing a server that is remote for these first two processes?
For the last process, did we try to first exit the application in question and all the associated processes (beremote, and any other processes that may get started with this application), then start the WAAS Mobile client, then finally start the associated process/application?
Cheers,
Mike Korenbaum
P.S. If this answers your question please mark it as such.

Integration with last

Similar Messages

Maybe you are looking for