Integration with Microsoft Exchange!!! How is it???
Hi!
I need to know in which level of integration has Oracle Portal with Microsoft Exchange?
Do we have any Pre-Built Portlet?
Thank you!
Eduardo,
Download the MS Exchange portlets here, and look at the documentation here.
regards,
Stewart
Similar Messages
-
Groupware integration with microsoft exchange server
I have a query regarding Groupware integration with microsoft exchange server.whether we require IIS server and microsoft exchange server on the same machine for groupware integration.or they can be on different machines.
thanks,
Pramodhi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N -
Oracle HRMS Integration with Microsoft Exchange Server 2007
I would like to know if it is possible to integrate Oracle HRMS 11.5.10.x with Microsoft Exchange Server 2007 using Microsoft Identity Lifecycle Management (ILM) 2007?
Has anyone ever come across something like this and successfully achieved it? Does anyone know of a step-by-step guide (or forum discussion) to achieve this?
Response(s) will be highly appreciated.hi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N -
Portal Integration with Microsoft Exchange 2007
Hi all,
I would like to integrate MS Exchange 2007 with portal so that I can enable all the groupware services including calendar, emails, appointments, availability etc.
Our Exchange landscape is integrated with our ADS, but portal uses its own user data store with a different set of User Ids.
I need to implement SSO between both these systems, where the user id is different.
I found few articles in SDN explaining how to configure SSO, but i couldn't quite find anything on how i can accomplish my objective here.
Can any of you help me out?
Thanks a lot
ShobinEduardo,
Download the MS Exchange portlets here, and look at the documentation here.
regards,
Stewart -
How effective does iPhone 4 sync with Microsoft Exchange
Hello,
Sorry for a possible repost but I did try to search for this topic but didn't find anything.
I'm really into the new iPhone 4 to use as a business phone. I have a Dell PC with Windows XP. The most important thing for me regarding iPhone is that the sync with Microsoft Exchange is flawless.
Can somebody (who has an iPhone and Microsoft Exchange) tell me how effective the sync is with iPhone and Microsoft Exchange? Does the e-mail sync quickly and how does the sync work with contacts and calendar. If I put a new calendar item in Outlook does it appear on my iPhone without me asking it to sync and etc.?
Please do share your experienceCan I put the sync settings on the iPhone 4 to only sync between certain time interval? Say, monday to friday from 08am to 7pm?
If you want push sync, then, no, you can't set a time interval. The entire point of push support is that the server notifies your system whenever something new arrives or something is changed. If you want to control when your iPhone contacts the server, then you can't use push. You can have the system fetch data at a set interval, or you can set to do it manually, if you prefer, but there's no setting where you can set a time window.
And can I put the sync settings only to store a certain amount of e-mails? Say the 100 newest?
You can set how may days of mail to sync, and also how many emails to show.
You might find the the user's guide helpful in learning about features and settings:
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
Regards. -
Configure sharepoint 2013 with Microsoft exchange 2010
Hi,
I am want to configure SharePoint 2013 with Microsoft exchange 2010.
Please let me how can I integrate these server to Send/ Receive domain E-mails.
Thanks,
C MahoneFor email integration there really isn't anything special about Exchange 2010 vs. any other mail server. Check the links here on configuring Incoming and Outgoing mail in SharePoint:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
UCM certified with Microsoft Exchange Server ??
Hi,
Is UCM certified with Microsoft Exchange Server ? how can we integrate UCM with Microsoft Exchange Server as we have Desktop Integration Suite to integrate with MS Outlook..
Thanks,
NLAs for the link to the manual, for 10g it's here (I believe for 11g it will be similar if not the same): http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/admin/managing_system_10en.pdf
It also mentions that SMTP protocol is used. Therefore, you will need to know the SMTP address of your Exchange Server.
As for who uses it, I believe it is the majority or at least a significant part of the clients' installed base. Note that it is one of the most widespread email servers. -
DPM integration with Microsoft Azure backup queries
Hi All,
We have made the test set-up environment with installed the below details
DPM 2012 R2 on VM (Windows 2012 R2)
We are using a raw disk of 200 GB for disk staging.
DPM integrated with microsoft azure.
Able to take file backup and databases backups from DPM and can perform the restore from Disk staging as well as from azure
Queries:
Will DPM support deduplication for exchange (2007,2010,2013) databases and for sql databases (2000, 2005,2008,2012,2014) ?
on the wire compression is enabled but how to verify that?
Is it possible to mount the raw disk to some other drives except local Disk (C:\)
How to do granular recovery in DPM 2012 R2 for microsoft exchange?Chris,
Really sorry for the delay in response.
I found lots of warning messages in the logs like below one:
578 788 24-Apr 20:49.7 18 readeriterator.cpp(587) [000000002435A140] 0BABF215-19DF-49F5-B8DF-7210CB336DD5 NORMAL
"CFileReaderIterator:GetNextFileReader -> Skipping Hardlink with Physical FilePath: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy34\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042b_31bf3856ad364e35_6.2.9200.16384_none_f8e4c1f6d2951dd3\KBDARMW.DLL,
Logical FilePath: \\?\Volume{bd3973d0-2f82-11e4-93f6-806e6f6e6963}\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042b_31bf3856ad364e35_6.2.9200.16384_none_f8e4c1f6d2951dd3\KBDARMW.DLL"
578 788 24-Apr 20:49.7 18 readeriterator.cpp(587) [000000002435A140] 0BABF215-19DF-49F5-B8DF-7210CB336DD5 NORMAL
"CFileReaderIterator:GetNextFileReader -> Skipping Hardlink with Physical FilePath: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy34\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042e_31bf3856ad364e35_6.2.9200.16384_none_fa395780d1ba2b68\KBDSOREX.DLL,
Logical FilePath: \\?\Volume{bd3973d0-2f82-11e4-93f6-806e6f6e6963}\Windows\WinSxS\amd64_microsoft-windows-i..l-keyboard-0001042e_31bf3856ad364e35_6.2.9200.16384_none_fa395780d1ba2b68\KBDSOREX.DLL"
So, I'm checking with concerned guys in here about this. I'll get back to you once I receive any update from them. However, if it very urgent and need immediate assistance, I suggest you to open up a support ticket with Azure technical Support team
as they will be able to provide you very quick solution.
Regards,
Manu -
ECC 6.0 integration with Microsoft Dynamics CRM
Hi All
I am working on a ECC 6.0 integration with Microsoft Dynamics CRM. I need to send the customer master data, va01/va02, vl01n/vl02n/ vf01/vf02 to CRM system. One option I have is to send in the form of IDOC with TRFC - TCP/IP. But looks like this needs a middleware like Biztalk.
Is there a way I can send this data using a Internet service in ECC 6.0 ??? As this would cut the cost of the Biztalk.
I really appriciate your thoughts on this. We don't have XI either.
Thanks a lot
VanHI Van Dan Jan,
We have just implemented integarion of SAP with Microsoft stack (Microsoft CRM, Share point and Axapta), But in all integration BizTalk as a middleware used.
There is two way requirements :
1. whenever Most of the control are at the Microsoft level like : Customer creation, Creation of orders, which need to be synchronus activity we have used RFC which internally calls BAPI. (So SAP adapter Configured at BizTalk). and whenever Biztalk receives request file from CRM or share point to there location they call SAP RFC's.
2. When DATA is needed from SAP to microsoft stack like to syncronize the missing transaction like customer pad and all.
Scheduled job at BizTalk end which call SAP to get the DATA via RFC mode :
In SAP we have two things
1. if DATA size is small (below 2 MB) like in last 1 hrs what are the sales contract created in SAP that need to updated in Microsoft other system than Biztalk will trigger a job at 1 hr interval or on deemand to get the detail which directly we pick from data base or using BAPI to get the detail via RFC.
2. If Data Size is large (more than 2 MB) like total transation happened in a day for all customers: then we wriiting the data in OS or application server and that job also get initiated from Biztalk end by sending any parameter to SAP.
advantage of using BizTalk is most of the control you can give it to them so they can run there job on deemand basis.
There is a something known as web service we can use to avoid Interfacing tool, but I dont have much Idea about that,
and please check how many interfacing point is there with SAP in your project, because if Interfacing points are more then I think it is not good to write a web services for so many things.
do let me know if you need further information. -
iTunes says my contacts are being synced with Microsoft Exchange over the air, but I do not have an Exchange account, and I have disabled over the air syncing on both my iPhone 4, as well as in iTunes. How do I remedy this? I did a complete Restore on my phone to rectify this, but got the same results.
I have worked for a couple of hours now; at first, none of my contacts were syncing with Outlook, even though iTunes said they were. Then after checking and unchecking everything I could find relating to syncing, some of my contacts synced. Now I've managed to get them all synced, but still getting this message. I need to make sure that going forward, all changes and updates are correctly synced manually whenever I plug my phone into my computer. Any suggestions?You are getting this message because you are trying to create an iCloud account on a PC. You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.
-
Hello,
I'm trying to sync the contacts on my iPhone 5 with my contacts on my Mac Book Air (merge them), I'm also using Outlook (Microsoft) to manage my email account and my contacts. I used to sync my contacts from my previous iPhone (4S) with my contacts on my Mac and also with contacts on Outlook.
Now that I have iPhone 5 I missed that sync (iPhone-Mac-Outlook), so I figure it out that in iTunes there is this message: "your contacts are being synced with Microsoft Exchange over the air. Your contacts will also sync directly with this computer. This may result in duplicated data showing on your device"
Every contact created on iPhone doesn't sync with my Mac or Outlook.
How should I configure my iphone and my mac to sync properly??
Thanks a lot!
Kind Regards,
Silvana
Mac book Air OS X 10.8.3
Processor 1.7 GHz Intel Core i5
iTunes 11.0.4
iPhone 5 iOS 6.1.4Not surprisingly there have been no answers to this question because the only person who knows how to use iTunes/iCloud/iPhone is too busy.
-
CCME integration with Microsoft Business Contact Manager
Hi,
Can anyone tell me, if a CCME can be integrated with Microsoft BCM such that when a call comes in details of the client pop up, should they exist in the Business Contact Manager.
Finding exact information is like find a needle in a hay stack.
Regards
LNHi Swinster,
Apologize for the late reply.
What is your current situation? As JS2010 stated, also in this KB article:
http://support.microsoft.com/kb/2101557
During the 'Specialize phase' of Sysprep, Sysprep.exe looks at the Last Modified Date of the ntuser.dat file for each user profile to determine which user profile to copy to the default user profile. However, the earlier cleanup functions of sysprep.exe
loads each Ntuser.dat file to make security ID (SID)generalizations. You cannot predetermine which user profile will be copied if more than one user profile exists.
How about we skip the copyprofile option?
Further, see if the following article would help to customise the user profiles settings:
Configuring Default User Settings – Full Update for Windows 7 and Windows Server 2008 R2
http://blogs.technet.com/b/deploymentguys/archive/2009/10/29/configuring-default-user-settings-full-update-for-windows-7-and-windows-server-2008-r2.aspx
Or we may consider seek help at the office outlook forum for the BCM deployment.
Best regards
Michael Shao
TechNet Community Support -
after lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?
I've had a similar problem. On my first boot up after installing 10.7.4, Firefox would not open. Crashed every time. Safari was not affected. I have no idea if it was related to the flash plugin, but I did install a the latest version of that a couple of weeks ago.
Here's what fixed it: a second boot up. -
IC Webclient Integration with MS Exchange
Hi
Can someone please help me with configuration/customization documents on crm IC Webclient Integration with MS Exchange. Please email me at [email protected]
Thanks
AbhijitHi,
Telephone is PBX system. In order to connect the telephone system to SAP Phone(CRM system), you need CTI Server. CTI enables the integration to ICI of CRM System using XML/SOAP protocols.
ANI module is a part of the Telephone system which enables to identify the customer number in CRM application. In other words, as you said, it is the phone system passing the phone no. of the calling person to CRM system. CAD generated on the IVR module part of telephone system).
CTI transfers the CAD to CRM and BP is displayed in the Interaction Center.
Hope this helps your understanding. Please give points if so.
Thanks,
John -
Crm IC Webclient Integration with MS Exchange
Hi
Can someone please help me with configuration/customization documents on crm IC Webclient Integration with MS Exchange. Please email me at [email protected]
Thanks
AbhijitHi,
Telephone is PBX system. In order to connect the telephone system to SAP Phone(CRM system), you need CTI Server. CTI enables the integration to ICI of CRM System using XML/SOAP protocols.
ANI module is a part of the Telephone system which enables to identify the customer number in CRM application. In other words, as you said, it is the phone system passing the phone no. of the calling person to CRM system. CAD generated on the IVR module part of telephone system).
CTI transfers the CAD to CRM and BP is displayed in the Interaction Center.
Hope this helps your understanding. Please give points if so.
Thanks,
John
Maybe you are looking for
-
Email is at a crawl. I have compacted. What else should I do?
I changed the automatically compact to 1 in each field (was at a different default) ...it takes about 60 seconds between screen changes...I am going crazy
-
How to create download prompt for mp3 link
Hello fellow flash users- I have been building my website all in flash and have a simple question that I cannot figure out for some reason (maybe its too simple) . Anyhow I have uploaded my mp3 songs of my music and used the geturl and _blank so that
-
Error Occured. Please check your settings and try again while opening a RTF
Hi, I'm having the above error while opening a template in MS-Word to create BIP Reports. I see a lot of messages on the BIP forum with similar error. Could anyone over there help on this issue please. Thanks Aravind
-
Anyone have experience with using Flip4Mac with Compressor?
I am suddenly getting a strange QT error. I just upgraded my QT version to the latest one, 7.4.5 and now I can't encode anything using Flip4Mac's WMV encoder through Compressor. Everything was working just fine before I did the upgrade, but now whene
-
HT1420 where can i view all my authorized devices and then deathorize one of them
Where can I view my authorized devices and then deauthorize one of them without deauthoriveing all of them ?