Integration with modules in different clients

Hi Experts,
We are designing a PS solution and its integration with MM and CO modules. The difficulty comes as these modules are maintained in a different client than the PS module. My questions are:
Is there any standard mechanism that SAP provides to make this integration out of the box?
For business strategy reasons we may have to choose a PI based integration scenario. Given that we have retreived the values we need from the different clients, how can we avoid the standard checks SAP performs before saving the data?
Have anyone experienced this situation before? Could you explain the main difficulties that you faced?
Thanks a lot in advance for your answers
Kind regards,
Neil

Not really,
in the past we had a split to:
Box with masterdata
Box for sales and purchasing
Box for Finance
In the master data I see still things like Logical System ( D00CLNT100)
We went go back to 1 box and had to upload the data from the"old" boxes to 1 box.
Perhaps you can better put this question in the technical forum, It should be possible what you want

Similar Messages

SAP integration with Lotus Notes

Hello Experts,
As we can do MS-Outlook integration with SAP BOne,my client is using "Lotus Notes",so if I want to integrate it with SAP Business One How it will be possible.
Plase let me know,
Thanking You!
Gauraw

Hi Gauraw,
Some information a colleague found on this:
==================
How to connect Microsoft Outlook with Lotus Notes e-mail servers
As none of the applications are SAP B1, the best resource is from
Microsoft and IBM
How to connect Microsoft Outlook with Lotus Notes e-mail servers
http://support.microsoft.com/kb/290834
Use Outlook to access your Lotus Domino mailbox
http://office.microsoft.com/en-us/outlook/HA010739021033.aspx
Deploying Microsoft Outlook Connector for Domino
http://office.microsoft.com/en-us/orkXP/HA011364481033.aspx
==================
Also:
The SBOMailer Service uses SMTP for sending emails - that means if the
Lotus Notes have an SMTP gateway/connector your client will be able to
use it for sending emails. Be aware that the gateway should not use SMTP
authentification (please see the note 782611). In that case you should
use an additional program between Lotus Notes and SBOMailer Service.
==================
Any other intergration does not exist to the best of my knowledge.
Hope some of this is useful.
Jesper

SAP E - Recruitment Integration with SAP PA ES Module

Hi all,
I have SAP Recruitment Application to be integrated with SAP PA_ES Module (SAP HR) through XI..
Now I have 2 questions;-
1.Does SAP recommends both the above mentioned applications on same SAP BOX ie the system will have both the application with the different clients on SAP system or a sort of addon...If yes , how the integration can made?
2.What is recommended/Suggested scenario for integration i.e. which adapters shall be used for this configuration??
it would be really very helpful if someone could throw some light on this
Regards,
AshwinM

Aswin
Why dont you check the following thread for more info
E-Recruitment
regards
krishna

BEx Integration with different source systems

Hi All
I know we can create BEx querys on top of an infoprovider. But instead of storing data into BW and creating reports using BEx tools can we integrate BEx with the other source systems. Like Business Objects tool which can be integrated with different sources. My client wants to know whether we can integrate with BEx for the following
Support data source -- SAP BW
Support data source -- Oracle
Support data source -- MS SQL Server
Support data source -- MS Access
Support data source -- MS Excel
Support data source -- ASCII Text files
Support data source -- XML/XSD
Support data source -- Web Services
Support data source -- SAP R/3
Support data source -- BO Universe
Thanks for letting me know your opinions

Hi,
in theory you can. You will still have a virtual provider on top of your Infosource which will be connected to your datasource; thus you'll have to create the structures; you'll have to load master data as well... so not so nice solution if you think that at this stage, the storage will be the less of your costs....
How are you going to deal with R/3 data?? I mean a great advantage of BW is really when you have an R/3 behind...
I'd rather consolidate all these disparate datasources using the Visual compsoer which can get this data out of nearly an datasource and merge them in one single report; in theory again you could implement all BEx functionalities but at which cost and effort??
Weird that a customer is asking such a question because it is usually the other way around: use SAP BW data in another front-end... by the way SAP is going to acquire BO soon....
hope this helps...
Olivier.

Problem with RFC call between different clients. Plesae help!

Hi Experts,
 I have a RFC enabled function module in one SAP instance 'A' where the client is 130. I am trying to call this function module from another SAP systen 'N' where client is 220. RFC destination has been set in 'N' system.
The RFC functin module pulls data fromm a custom table. For a given input it is puuling data in 'A' system.
But when I call it from 'N' system with the same input it is not pulling the data.
I feel the problem is with teh different clients.
please help me how to resolve this.
Is there any setting in RFC destination?
Thanks
Gopal

Hi gopalkrishna,
1. Is there any setting in RFC destination
Ofcourse there is.
2. The tcode is sm59.
3. Where u have maintained in system 'N',
 we have to specify
 a) Server 'A'
 b) Client Number 130
4. So while calling from N(220),
 it will connect A(130)
 and fetch data from A(130) only.
regards,
amit m.

DO integration with other modules

Hello Gurus,
When delivery is created, this means , it can be saved without picking packing or pgi or it can be pgi just done.
When this is created, why is there no integration with MM? for example , when PGI, the stock count is it reduced in MM?
So, it should reduce MM stock but not Reserve MM stock in this situation?
Also, how is it integrated to PP?
Will the delivery place demand in PP when it is created? Should the demand not already placed at time of order creation?
regards
M Russo

First of all, please dont get confused with the postings happening in SAP with each module.
SAP has distinguished different modules for easy way of operation and to have certain control over the related activities. Having said this, you cannot treat (assuming that you intend to say unrestricted stock) the stock as MM. In fact, MM activities would come to an end once they inward any component and made the relevant FI / Excise postings. Subsequent to this, PP activities starts where only, the stock will be posted to unrestricted subsequent to which SD activity starts.
why is there no integration with MM
There is an integration with MM/PP once you create a sale order which is based on customization in OVZG and VOV6.
Based on the above settings, stock will get reserved to either sale order or delivery.
thanks
G. Lakshmipathi

FI/CO integration with PM, PS, MM modules

Hello,
Any body have information about ' FI/CO integration with PM, PS, MM modules
Could you please some explore above topic
Thanks,
Alex

HI Luciano,
It works as designed because of the following reasons:
1. The WBS ID in ERP system must be unique.
2. The phase-id in the cProject is NOT unique, you have e.g. same phase-id for two phases.
That is why the replication does not use the phase-id to create the WBS ID. The internal ID of phase is (default ID during creation of a phase) is used for replication
Though there is a Badi method let you change the the WBS ID, but I would not recommend you to do it because of above reasons.
Kind regards,

Calling a ESS WDJ COmponent with different Client no

Hi,
my task is to make ESS available on a different Client (100) instead of 001.
i was reading about the "Mapping Logical Systems" using the parameter sap-wd-arfc-useSys :
http://help.sap.com/saphelp_nw70/helpdata/en/af/84a34098022a54e10000000a1550b0/content.htm
I did the following :
1. Create a new JCODestination :
SAP_R3_HumanResources_MetaDataHNL and SAP_R3_HumanResourcesHNL with the new client.
2. Call the URL
http://<portal>:<port>/webdynpro/dispatcher/sap.com/ess~lea/com.sap.xss.hr.lea.appl.LeaveRequest?sap-wd-arfc-
useSys=SAP_R3_HumanResources:HNL&sap-wd-arfc-useSys=SAP_R3_HumanResources_MetaData:HNL
Result : i get a 500 internal Server error after the login for this client.
Test 2: The same with the default JCO Destinations : same error
Test 3: The same without the additional parameter : working
The JCO Destination is only SAP_R3_HumanResources when i looked it up the Content Admin Area for Web Dynpro.
What is the point i am missing ? Has someone done it successfully to connect to 2 systems per sap-wd-arfc-useSys ?
Regards,
Kai

Hi Arun,
the JCODestination Tests (Metadata) are successful.
The Assignment for ess~lea is only for :
SAP_R3_HumanResources
SAP_R3_HumanResources_MetaData
It is a standard ESS iview. How and why should i assign additional JCODestinations ?
I overweite it per parameter sap-wd-arfc-useSys
Regards,
Kai

Oracle Sales Integration with other modules - Flow Diagam

Hi,
Where can i find a flow chart showing Oracle Sales Integration with other modules?
Thanks,
Hari

Hi
You can refer to my publishing in this site which might help you to some extent
http://apps2fusion.com/at/sk
Hope this helps
Regards
Sivakumar

WebSurvey: questionary Versioning and Integration with web-mail clients

We have SRM 5.0 SRM_SERVER 5.5 SP level 7
Vendors access to a free link where they insert their data and register in SRM system. Automatically a questionnaire is sent to the vendor. Vendor complete the questionnaire and send it back to SRM with a mail sent by Outlook.
If now, we want to send back the questionnaire to the vendor (i.e. he forgot or he failed to insert one important data) the questionnaire received by the vendor is always empty, and there is no possibility to send back the questionnaire previously filled, in order to complete it just with a delta of data. This is a serious problem because our questionnaire are very long.
Moreover, it is not possible for the vendors to save a draft of the questionnaire locally on his pc, in order to complete it in more steps. This is important, because of the length of our questionnaire.
Another point of discussion is the integration with other client mail like Google o Yahoo.
Is it possible to send the questionnaire by a web client? Or the only way to send the questionnaire is by Outlook? Outlook express is good too?
Thank you very much for you attention.
Guido

Hi
Please go through the following pointers ->
Note 779972 - SURVEY: Configuration required to receive emails
Note 889963 - ROS: Questionnaires are not updated
Re: Supplier Registration Questionnaire
Supplier self registration browser settings
SUS - registration e-mail
ROS Questionnaire Recipient Email in So50
Re: BSP Error - HTTPS has not been configured on this Server.
Response Questionnaire of Supplier Registration
SRM - questionnaire submission by the supplier
Registration - Switch from URL to Attachment
Re: Notification for Partner creation after Supplier pre screening
ROS_PRESCREEN with ROS on SUS, how to view in EBP
Sending Questionnaire
ROS Questionnaire link sent by email
Send custom email to an external server.
ROS Questionnaire Recipient Email in So50
Hope this will help.
Regards
- Atul

What SAP-modules can be SAP HR integrated with?

Hi to all!
I have a following question: What SAP-modules can be SAP HR integrated with? What HR objects and business processes could be involved in integration. What are the main advantages of this kind of integration.

The best advantage of SAP HCM is that we have Integration with other Modules
as per as SAP HCM i worked integration with FICO , SD
Business objects form FICO side will be Cost Center
and there are many Advantages with the integrations with other modules

WBS element integration with Trade Claims Management Module

Hi All,
anybody knows if Trade Clams Management module of CRM is integrated with management of WBS elements?
We actually want to post the amounts paid to customers through Trade Claims Management into CO-PA; we're trying to understand if using WBS element is a viable solution. Moreover if this is the case i'd be curious also to understand how COPA posting of accruals would work.
Regards
C

m

PS integration with other modules

Hi Experts
Pl tell me from configuration point of view how ps integrates with MM , SD and FI. What are all the necessary steps we have to do in integration .
Thanks in Advance

Hi Amit,
PS is integrated with all modules of SAP.
MM and PS, we can create Purchase requisition in PS itself rather than doing in MM. This PR can be converted into Purchase order. To create PR in PS, we have to use the MM master data.
SD and PS, we can check the revenues in PS. This can be done while creating the Sale order we have to give the WBS element.
FI and PS: We can provide the direct financial entries in FI to post cost to the project in PS by selecting the WBS element.
I hope i clarified your query
Regards
Sankar

Integration of R3 Systems(Different ECC Versions) with PI

Hi,
I have a situation where a PI system has to be integrated with R3 Systems of different ECC Version.
Please explain me what is the best practiced solution for this situation?
With Regards,
Manikandan Rajendran

Hi,
Integration of R/3 with Pi can be achieved by most frequently used communication wasy as IDOC, RFC, Proxy etc.
Now the type of communciation depends upon R/3 versions such as Proxy can be used for WAS > 6.4.
For mass data and asynchornous communciation IDOC can be good solution. In lower versions (WAS<6.4), where proxy can't be used, RFC is good option for Synchronous communciation.
Refer the similar discussion and few links as study material
Integration r/3 system with xi
Thanks
Swarup

Integration with other modules

Hi Sap Gurus.
Hi,
Plz explain...
MM module is integrated with which modules .
And how it is Integrated??
How MM module to integrate with CO(Product Costing).
If thr any material please send me to [email protected]
Thanks..
Raju

Hi,
FI-MM Integration:
When you go for transactions like GR,GI,SES,MIRO,STO,Payment then your respective G/L account updated.For updatinging the G/L account, You have to go for Automatic Account determination and steps are as follow;
1.OMSK: Creation of valuation class and assigning account category refrence,
2.OMWM: Active valuation Grouping Code,
3.OMWN: Active movement type with G/L account,
4.OMWD:Active valuation Area,
5.OMWB: Active chart of account, transaction key,valuation grouping code,account grouping Code, valuation Class and G/L accounts.
Data flow to costing in the concept of cost element.
SD-MM Integration:
Generally SD is integrating with MM in Stock Transport Order (STO) and Third Party Order.
Basically STO is divided in to three types,
A.STO with SD delivery
B.STO without Delivery
C.STO with SD delivery and billing.
FI-SD Integration:
In T.Code:VKOA
If helpful then reward.
Regards,
Biju K
Message was edited by:
Bijay Kumar Barik

Integration with modules in different clients

Similar Messages

Maybe you are looking for