Integration with PLC, Weigh Bridge, Attendance Machine & Spectrometer
Dear Friends,
Can anyone help me with any knowledge on how to integrate
1) PLC
2) Weigh-Bridge
3) Attendance Machine
4) Spectrometer
with SAP System?
I have never done any integration...and looking for help.
Points assured if helpful.
Regards,
Rohan Das
Dear Rohan,
You need to go through the SAP xApp Manufacturing Integration and Intelligence (SAP xMII) technology, which offers a sophisticated yet easy-to-use application for aggregating, transforming, and distributing plant and production information.
Do go through some OPC (Object for Process Control) documents also.You can visit the link below to get a feel of it.
http://www.opc-to-sap.com/
Bye
Take Care
Sauvik
Similar Messages
-
B1 integration with PLC based machines
Dear Experts,
Is it possible to integrate SAP B1 with PLC based machines used in manufacturing.What is the format in which data can be exchanged with B1?
Thanks ,
AsapFanDear Gordon,
The functions would be pertaining to production figures captured by the machines.Additionally the machine parameters and shift details would would required to be entered into SAP B1.
Regards,
Sameep -
Issue in workbench integration with Dev studio on unix machine
Hi,
I am trying to integrate my workbench on unix machine with dev studio on windows machine. To do so, I did the following:
1. created a new application in dev studio
2. In dev studio - Tools - Workbench settings I gave the host and port of my unix workbench. It was able to connect properly.
3. Then through Tools - Workbench - Set Instance Configuration, I sent these configurations of my application on dev studio to that of workbench(which I had selected earlier in step #2)
4. Then in my unix machine, I replaced the wine data with my new data feed
5. Ran initialize services, load baseline update and baseline update scripts.
5. My baseline update script Failed at Forge with the following error:
FATAL 03/07/13 12:21:30.718 UTC (1362658890718)
+FORGE {config}: Could not open "/app/ENDECA/endeca/endeca/apps/Test/data/processing/wine_data.txt.gz": No such file or directory +
+ERROR 03/07/13 12:21:30.719 UTC (1362658890719) FORGE {config}: Forge failed with 1 error and 0 warnings.+
I am not able to figure out why it is still looking for wine data. Any suggestions on this are highly welcome!
Thanks,
VineetVineet,
Using a text editor, search for "wine.data.txt.gz" in your ./Test/config/pipeline/pipeline.epx. If you find it, note the record adapter's name trying to read it and then remove it in DEV Studio and reupload your pipeline project. If you don't find it, check the same file in the ./Test/data/processing/pipeline.epx directory. If you find it there, you may have an issue with your baseline update script as defined in your ./Test/config/script/AppConfig.xml file. Make sure that your Forge.getConfig(); command is successfully copying contents from the ./Test/config/pipeline directory to the ./Test/data/processing directory (you may want to clear out the processing directory before your next run to make sure of it).
HTH,
Dan
http://branchbird.com -
Can we link GR [Receipt Quantity field] to weighing bridge to compy the Wt.
Dear Experts,
I have the requirement In Goods Receipt -
Material Quantity is to be copied Automatically at Good receipt quantity field from the weighing bridge digital meter.
Is it possible to link
if it is possible, please explain how to link?
which tools we have to use in SAP?
please brief me on the my requirement.
Thanks in AdvanceHi,
It is possible to link.
SAP has a command program that is setup and linked with the weigh bridge application.
The program pushes data to R/3. -
Weighing Scale integration with SAP ( Packing Station)
Hi All,
We need to have our Weighing Scales integrated with SAP to capture the READINGS for parcels / cartons / shipments automatically.
I observe there is a provision for maintaining RFC connection , Scale Checkbox etc in SPRO--->Logistics Exec ---> Packing --->Set profile for packing w.r.t HUPAST tcode ...
Would you plz help me with some work-arounds ...???
Regards
JamnaHi Folks,
There is XMI technology available that can be potentially leveraged for this type of requirements in integrating any electronic gadgets talking to SAP ....
I think SAP XMI will be vry useful for this.
XMI is having ability to capture real time data from other system and update accordingly.
It has have connectors which will capture values from other system and pull in SAP.
How to Integrage Weigh Scale with OPC server via xMII 12.0
Hello Experts,
I am new to xMII. We want to integrate shop floor weigh scale into SAP PI Sheet to read the value from weight scale into PI Sheet. We have the infrastructure Ohaus weigh scale, xMII 12.0, SAP ERP 4.70, Kepware OPC Server, installed xMII framework for UDS and UDS 4.0. We are able to integrate the OPC Data tags into SAP PI Sheet successfully. But we need help to integrate weight scale with OPC server to read the scale value into OPC data tag.
Can any one give the steps to integrate weight scale with OPC server?
with best regards
K. Mohan Reddy
I know someone who have developed few applications on integrating weighing machines with R/3.
By: | 04 Dec 2008
i am working as a ABAPer in my company and developed DLL in VB6 on integrating weighing machines with R/3.
implemented and working in more than 10 sites.
By: | 12 Dec 2008
ERP-Scale from Pocket Programs provides a standardized u201Cplug & playu201D interface for weighing equipment. It is SAP Certified and can be used for integration of weigh-scales with the SAP Packing Station transaction (HUPAST) or with custom ABAP developments. Major international companies are already gaining benefit by implementing ERP-Scale in their plants worldwide.
By: | 04 Feb 2009
Re: Custom development for UDS
What have to say folks about the possibilities with the above ? But shouldnt SAP have some standard FM / RFC / BAPI owefully facilitating the same???
But the available FM HU_GET_RFC_DATA doesnt have any documentations attached to it ?
Regards
Jamna -
Hi SAPERS,
Please provide me the information about how to connect the vehicle weigh bridge system to SAP system to get automatic net weight should be populates at the time of GR. Is there any interface is required for it.
Thanks in Advance,
Durga Prasadhi
u have to create gate module with helpof ur abapers
like for inward movement there will be a T code
and for out ward there will be another and u will get diffrence which will be use fo gr
in same frist t code u can proide the gate pass system
what u can do is create a new table for in ward movement and another table for outward
then link them for two t codes for in ward an out ward movement
do t code one for truck+load
then t code 2 truck
so u will get the diff
then do gr for the diff
while doing t code one u can develope some thing for the gate pass like trcuk no or cahllan no etc
just discuss this with ur developer hewill do it
LECI aslo can be use for the in and out pass
regards
kunal -
How to interface the Weigh Bridge System with ABAP thru' RS232 PORT
Hi Gurus,
Can any one guide me how to interface the Weigh Bridge System with ABAP thru' RS232 PORT. I think we have to use the BAPI. What is the name of the BAPI.
I have to capture the GROSS WEIGHT, TARE WEIGHT. can any one give me the code for that.
Goodwill
Jacob charlesHi Jacob,
<b>You can integrate Weigh Bridge with SAP ABAP .
I have done this for one of our projects
The technology used in RFC SDK and DCOM Connector.
Refer to this link
SAP Business One SDK Version 2005 [original link is broken]
Search here for sap software distribution center link
https://websmp203.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dndcom/html/sapintegration.asp
http://www.intelligententerprise.com/channels/applications/feature/archive/homann.jhtml;jsessionid=BR44S4YLZ0HSGQSNDLOSKHSCJUNN2JVN?_requestid=505707
www.sapgenie.com/sapgenie/docs/SAP%20Connectors.doc
help.sap.com/printdocu/core/ Print46c/en/data/pdf/BCMIDDCOM/BCMIDDCOM.pdf</b>
Good Luck and thanks
AK -
Connection Microsoft Dynamics Nav to a weigh bridge machine
I want to read data from a digital weigh bridge from Navision anyone out there with a solution.
You can use web-services in NAV for it. If you need details, try on Dynamics Community forum: https://community.dynamics.com/nav/f/34.aspx
-
We want to read data from weigh bridge and display in oracle forms & store
Sir/Madam,
in our organisation we had one requirement. i.e is reading data from weigh bridge using serial port, displying that data in oracle forms and when ever user click save button we store that into my oracle database. we are using oracle 8i and forms 6i and windows OS environment. we don't know reading data from serial port and placing that into form items. please help me as early as possible if there is any property available in d2k regarding this requirement .
thank you,
vishnuThere's no property in Forms that makes you read serial ports, but as far as I know you need to know the API of the machine which you want to read data from (it should come with machine's manual) and then it will be easy to store it in forms item.
Tony -
Reading Weight from Weigh Bridge....
Hi.
The scenario here is that we have to create module pool for picking up
the weights of trucks from weigh bridge ( AVERY brand ).
The existing system is in foxpro . Please find attached the text of AVERY guidance which exhaustively shows how the fox system is reading the
weight from the port, to which the weigh bridge is attached, on the
system kept at the location.
I wish to have the info regarding how, this functionality can be
achieved in ABAP as my perception is that this is not a simple
execution / run of an external program.
regards,
Suman
TEXT
getwt.prg
sample weight recieving program for Avery CTH
this is demo program for getting weight from the CTH
using the CALL and LOAD commands of dBASE III PLUS only.
This demo program demonstrates the use of LOAD and CALL commands
of dBASE III PLUS to get the weight from the CTH. The actual
program to get the weight is a file called GETCTH.BIN
To use GETCTH.BIN directly do the following:
1. Start dBASE III PLUS normally.
2. Type the command - LOAD GETCTH at the dot prompt of dBASE III PLUS.
(Be sure to give the correct drive and/or directory where the
file GETCTH.BIN resides in your computer system).
3. The program GETCTH.BIN will return the weight in a variable
passed from dBASE III PLUS, so first initialize a variable in
dBASE III PLUS to recieve the weight.
The weight string returned by the CTH is 26 charecters long so
define a variable of length 26 by typing the following command
at the dot prompt:
WEIGHT = "ABCDEFGHIJKLMNOPQRSTUVWXYZ" { Any dummy value }
or
WEIGHT = "2BCDEFGHIJKLMNOPQRSTUVWXYZ" for COM2 port
( Note -> The choice for the name of the above variable is
purely arbitrary. Any name could have been chosen)
4. Next type the following command at the dot prompt to call the
GETCTH function :
CALL GETCTH WITH WEIGHT
5. After some time the dot prompt will return. At the dot prompt
type the following :
? WEIGHT
If the GETCTH function has been successfull in getting the weight
from the CTH then this function will return the weight as a string
of 26 charecters containing the weight and other information.
Otherwise, if the function is not successfull then the value of
the variable passed will be set to 26 spaces. The major reason
for the failure of the function will be a timeout error i.e.
the CTH did not respond after a preset time interval had elasped.
The returning of 26 spaces makes it easy for a dBASE III PLUS
program to retry the weighing operation if failure is detected.
The use of this in a loop till the function succeeds in getting
a weight is illustrated below in the program.
The weight returned by the CTH consists of a string of 26 charecters
A sample weight that could be returned is reproduced below:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
19600 kg G 000016 O
The following is the sequence of charecters :
1. The first two charecters ( positions A - B above ) are
space charecters.
2. The next five charecters ( positions C - G above ) is the
weight from the CTH - ( 19600 in this case).
3. The next charecter ( position H above ) is a space charecter.
4. The next two charecters ( positions I - J above ) are the weight
units - ( kg in this case ).
5. The next four charecters ( positions K - N above ) are space
space charecters.
6. The next charecter ( position O above ) specifies mode of
operation. It shows 'G' for Gross mode and 'T' for Tare
mode of operation.
7. The next charecter ( position P above ) is a space charecter.
8. The next six charecters ( positions Q - V above ) is the
consecutive number which is unique for each weighing.
9. The next charecter ( position W above ) is a space charecter.
10. The next charecter ( position X above ) is the machine ID number.
11. The last two charecters ( positions Y - Z above ) are
Carriage return and Line feed charecters.
Clear the screen and show the copyright notice.
clear
@ 0, 0 TO 23, 79 DOUBLE
@ 3, 1 TO 3, 78
@ 11, 25 TO 18, 57
set color to w/n+
@ 1, 26 SAY "A V E R Y I N D I A L I M I T E D"
set color to
set color to n/w+
@ 2, 10 SAY " Demo program for getting weight from Avery weight digitiser - CTH "
set color to
set color to w/n+
@ 6, 3 SAY "(C) Avery India Ltd.- 1989,1990 All rights reserved."
@ 8, 10 SAY "The source code of this program is for pure demo purposes and all"
@ 9, 10 SAY "copyright of this demo program and its source rests with"
@ 10, 10 SAY "Avery India Ltd."
@ 20, 10 SAY "This program and its accompaining source code cannot be used"
@ 21, 10 SAY "without the prior permission of Avery India Ltd."
set color to
set color to n/w+
@ 17,26 say " Press any key to continue... "
set color to
wait ""
@ 4,0 clear to 23,79
@ 0,0 to 19,79 double
WEIGHT = space(26) && define a variable to get the weight
load getcth && load the module from disk
&& this assumes that the file GETCTH.BIN
&& is in the current drive/directory.
&& If not, use drive specifier.
do while weight = space(26) && the main loop
call getcth with weight
enddo
set color to w/n+
As explained above the last two charecters of the weight string
are the Carriage return (CR) and the Line feed (LF) charecters
out of the total of 26 charecters of the weight string. So to get
the whole weight string other than these last two chareceters we
can use the SUBSTR command of dBASE III PLUS as follows :-
@ 14,20 say "The weight is : " + substr(weight,1,24)
This will show the whole weight string on the screen i.e. all
24 charecters ( it will not show the CR and the LF charecters ).
The CR and the LF charecters are as it is unprintable charecters
and will show up as control charecters if printed on the screen.
If the whole weight string is not required and only, say, the
weight and the weight units are required, then the following command
could be used :-
@ 14,20 say "The weight is : " + substr(weight,1,10)
This will show the weight value and the weight units (this substring
will include the embedded space charecters in this susbtring).
Similarly, other parameters from the weight string could be
incorporated, if required, from the whole string to enhance
the weighing process on the computer.
The idea of putting the CALL statement above in a loop is that
sometimes due to unavoidable reasons, there may some garbage
charecters on the serial port. Thus it may be necessary to flush these
charecters from the port by CALLing the function again.
Sometimes, the function may return without a timeout error but the
variable may contain some control charecters which do not make sense.
In this case the function should called repeatedly till the proper
charecters are returned. This occurs due to the reason explained
above.
@ 14,20 say "The weight is : " + substr(weight,1,24)
set color to
set color to n/w+
@ 16,5 say "Please read the README.DOC file on this disk for more information"
release module getcth && release module from memory
set color to
Please refer to the dBASE III PLUS manuals for a
complete discussion on the LOAD, CALL and RELEASE
commands.
Message was edited by: Suman TyagiThanks, but I've already seen this thread and done the steps described on it.
Actually, my question is very specific... How to populate the fields LinkVal and LinkUnit of the registry...
I read all the threads here in SDN and they don't answer my question...
I'd be glad if someone had already done tcode HUPAST works for Filizola...
Tks again. -
Seimens HMI Integration with SAP MII
Dear MII Experts,
We are trying to integrate shop floor systems with SAP MII for discrete manufacturing industry.
I came across the client has 70+ machines in the plant .the vendor is "DMG"
Seimens HMI is installed on each machine .
What are the possible ways here to connect to PLC from MII
I am very new to this integration part .
Can MII directly connect to Seimens HMI .
I am very new to this area , client is ready to pay extra cost for any extra interfaces .
Please suggest me the architecture to follow .
Please give me a detailed explanation here , please correct me if I my explanation is wrong here
Please reply me for any other clarificationHi Eswaraiah,
To access the PLC data in MII, you would need couple of things more.
1. OPC Server where the PLC stores the data.
2. PCo (SAP Plant Connectivity) that can read the data from OPC Server and send the data to MII for manipulation.
From PCo MII can read the data and you can then perform your business logic. Also, PCo has built-in notification settings which can trigger MII's transactions based upon some conditions.
So I believe, your landscape would look like
Siemens HMI --> OPC Server -> PCo --> MII
Check these out...
PLC Integration with SAP MII
Connecting MII to PLC devices
Communicating with PLC
Regards
Tufale Ashai -
Dear ABAPers,
I am in Cement Implementation Project and they asked for an interface between ERP and Weigh Bridge in SD cycle .
Kindly could anyone tell me how can i start with this task? or can anyone provide methodology for performing this interface?
ThanksDo you have a process controlling the gate, identifying the truck, and collection two weigh-tickets empty/loaded from teh weighbridge?
If so we have an integrated solution to collect all relevant documents (weigh tickets, delivery sheet, truck identification, even photo), outside SAP, and when all is complete send it as one object on-line to the SAP screen for entry validation. This way you get two important benefits: No SAP load for programming and server load, robustness.
Have a look at [SIP Ltd > solutions ISEC|http://www.sip.com.gr:8081/triboni/exec/x/gr.sip.site.display/xsl/display/displayChapter/solutions/displaySubChapter/ISEC/page/chapter.html] the Integrated Services ERP Connector does this exactly. Its a separate server communication directly with SAP. This way the whole process of weighing and making the invoice is off line, easy parametrizable, and on-line with the SD.
Hope this info helped
Spyros -
RE: Legacy Integration with PI/Open
Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Excel integration with Entry and Approval for SSM not working
Iu2019m having trouble getting excel integrated with E&A for being able to enter large number of historic data points into a cube-built model u2013 Iu2019ve gone through all the docs several times and there is no good concrete explanation on how to do this. I keep getting the following error message:
Error opening Excel Automation server can't create object. This can be caused by:
1. - The application is not installed on your machine
2. - The browser security does not support ActiveX scripts.
3. - Your were prompted to run ActiveX and you said No, if that is the cause close all browser instances and reopen.
However, I've done the following:
- Iu2019ve installed the excel add-in on both the server and my local machine, and Iu2019ve enabled the add-in part in Excel on my local machine.
- The browser security is definitely set to accept all active X scripts
- I am never prompted to run activeX when I select u201CHistorical Datau201D within entry/approval. I just get the above error message.
- Iu2019ve flushed cache and restarted listener several times.
What am I missing? I donu2019t see it in any of the docs.
Thanks!Robb,
Looking at what you've done, there doesn't seem to be an obvious answer. The best suggestion I can make is to fill out a support ticket on this. There must be other factors at work here that will require a deeper look.
Regards,
Bob -
Unity Connection Integration with CS 1000 and Meridian 81 - PIMG
I have a customer who have (2) Nortel Meridian 81 and (1) CS1000 for their 3 locations along with Octal 350 servicing 2500 voicemail users today. Customer also has a Cisco UCM in their network today which is servicing their wireless phone users.
UCM and CS1000 are networked together using Q.Sig trunks today. Customer is looking at replacing their Octal solution with a new Voice mail solution.
I was looking at integration documents for Unity Connection using PIMG.
In this scenario, would I need 3 separate PIMG 's at the three remote sites and integrate it with Unity connection or Can I achieve this using just one PIMG at one of the sites, considering the three sites are trunked together using tie-trunks.
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/7x/integration/pimg/guide/cucintpimg090.html#wp1051831
Appreciate any pointers/ help.Hi there,
Just to add a note to the great tips from Hailey (+5 Hailey!)
We are in the final stages of replacing our "old" Octel with Unity Connection, part of
which is integrated to our CS1000 and CUCM in a "Hybrid" deployment like yours
Centralized Voice Messaging
Cisco Unity Connection supports centralized voice messaging through the phone system, which supports
various inter-phone system networking protocols including proprietary protocols such as Avaya DCS,
Nortel MCDN, or Siemens CorNet, and standards-based protocols such as QSIG or DPNSS. Note that
centralized voice messaging is a function of the phone system and its inter-phone system networking,
not voice mail. Connection will support centralized voice messaging as long as the phone system and its
inter-phone system networking are properly configured.
Setting Up a Nortel Meridian 1 Digital PIMG
Integration with Cisco Unity Connection
Attachments:
cucwithnortel.pdf (308.1 K)
Centralized voice messaging provides voice messaging services to all users in a networked phone system environment. Connection can be hosted on a message center PINX and provide voice messaging services to all users in an enterprise assuming the message center PINX and all user PINX phone systems are properly networked.For a centralized voice messaging configuration to exist, a suitable inter-phone system networking protocol must exist to deliver a minimum level of feature support, such as:•Message waiting indication (MWI).•Transfer, which ensures that the correct calling/called party ID is delivered to the voice messaging system.•Divert, which ensures that the correct calling/called party ID is delivered to the voice messaging system.Other features may be required depending on how the voice messaging system is to be used. For example, if it is also serving as an automated attendant, path-replacement is needed as this feature prevents calls from hair-pinning.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/design/guide/7xcucdg050.html#wp1053538
Cheers!
Rob
Maybe you are looking for
-
Using payoneer service as US bank account
Heslo, I have a paypal account that i often use. I have a verfied Slovak bank account linked to it and i use it for withdrawals. What i would like to do is also add a US bank account. Since the us banks dont open accounts for foreigners i would like
-
Issue with Aborting Instances in 10gR3
All, I have a business requirement where I need to be able to abort instances ( Parent & Child) for a particular Process. Here is what I do 1) in my parent Process I create a "Message Wait" while allows External Notification and also interrupts. I th
-
I wanted to use my $20 reward certificate, but the subtotal was $19.98 (the total without tax). I was told that I needed to purchase another item to make the total over $20. I asked if they could just override it because I didn't care about the $.0
-
Upgraded to Exchange 2007 - Problems with opening attachments in e-mail Treo700wx
We upgraded our server at work to Exchange 2007. Ever since then, there have been multiple problems, on of which I am not able to open pdf files, excel or word files on my handheld 700wx. Anyone else have this problem. Talked with Verizon, they su
-
4s turn off suddenly while using
my 4s will turn off suddenly while using ,and i have to hit home and power button same time to turn on the iphone.it happens every two days,and sometimes twice a day.is it a hardware problem?