Integration with POS to SAP 4.7 / ECC 6.0

Hi Experts,
Is it possible to use POS with SAP 4.7 or ECC 6.0 without using IS Retail. If possible can you please explain how can we do that ?
Thanks
Christine

this is not the forum to post your MM question???!! Post in appropriate forum.
--Ragu

Similar Messages

SAP 4.7 / ECC 6.0 integration with POS

Hi Experts,
Is it possible to use POS with SAP 4.7 or ECC 6.0 without using IS Retail. If possible can you please explain how can we do that ?
Thanks
Christine

this is not the forum to post your MM question???!! Post in appropriate forum.
--Ragu

SAP ISU(EpH 4) integration with MDUS using SAP PI 7.0

Hello Everyone,
As I am newbie to all this, I have been doing R&D to achieve the Integration between our SAP ISU and MDUS. Here is what I have already done.
Establish the link between SAP ECC and SAP PI Server (Ports, RFCs, etc.)URL: Connection Settings between ECC and PI system - Process Integration - SCN Wiki
SFW5: Switched the Utilities Component On
SPRO: Define Advance meter capabilities and Activation Groups
Imported the AMI related components IS-UT 604 to the IR
Defined Landscape, Technical and Business Systems
Here are the challenges I am facing and where I need your help.
How do I configure a scenario (e.g. Remote Disconnect) in PI, I will be very happy for step by step instructions
How do I configure that If I Disconnect the Device in ISU, a service call is generated in ISU which will flow from ECC -> PI Server -> MDUS and how do we test it?
How do I check if the call has reached PI Server? I mean there must be some logging like ABC Application requested for XYZ Service.
Your help is much appreciated. It is much like connecting the pieces yet unknown to me. Feel free to share if there is any guide or handbook available for a sample AMI Integration Scenario.
Regards,
Adil Khalil

Hi Adil,
Firstly download the Enterprise Services for SAP PI from the service market place, released for the Ehp eg Ehp6 of your back end ISU system.
go to the below link
https://websmp205.sap-ag.de/swdc
Download all the (ES)content related to utilities XI CONTENT-IS-UT and load this in your PI system. Once you have these ESR in PI, you will be able to connect your SAP ISU system with the help of a proxy.
Regards,
Iqbal

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

AD Integration with sap abap R/3 system

Hi All,
We are in the planning to setup AD integration with our present sap system, where ad user name is differently maintained and sap user ids are different. we don't have any java systems in our landscape. our requirement is simple , user id and password authentication should be through AD.
However was not able to find any specific implementation guide, it would be great if any one can share the best possible solution with steps to take an approach.
I have already gone through many post but couldn't find any thing suitable for our scenario.
Please help.
Thanks and Regards
JADS.

Hi Patrick,
Thanks for the link , we do not have SSO installed ,do we have to installation sso. if yes could you please let me know were can I find the installation Guide for the same.
1. Our requirement is very simple we want achieve the user id disable unable locked unlock through AD and our ad user names and sap user names are different. and we have only abap systems as you mentioned abap does not support ad integration. what will be the best Approch if we have to achieve this in our landscape.
Kindly help since im new to ad integration.
Regards
Jads.

POS DM integration with SAP IS Retail, BI, XI

Hello Gurus,
My client wants to go with POS DM. We already have XI 7.0, BI 7.0 , IS Retail 6.0 AND third party POS system. Please let me know whether these prerequisites are ok to implement POS DM. Please also provide the implementation procedure.
Your help will be highly appreciated.
Thanks in advance.
David.

HI,
Our Product Version - SAP NetWeaver 7.0 BI Content Add-On 4.
To perform planning activities in MAP- MDP, we can use the standard maintenance views provided with the application.
The standard maintenance views delivered with the system are included in group 0RMP_DEMO and are as follows:
View Type
0RMP_V1_STYLE_M    Create new style per hierarchy node and material category
0RMP_V2_COLOR_M   Create new color per merchandise group
0RMP_V4_PSQS_M      Maintain pack size and quota scale per style/color
0RMP_V5_SIZE_M        Create new size per merchandise group
0RMP_V3_STYCO_A   Assign color to style per merchandise group Assignment
0RMP_V6_STYSZ_A    Assign size per merchandise group
But, when I execute a transaction "UPARP_RPP - Example : Retail Purchasing Plan - Integration Planning Content " and then in the form, tab "Option plan", press "Create color", I receive message ''Maintenance View '0RMP_V2_COLOR_M' is invalid. Please verify its customizing'.
How can we install this group 0RMP_DEMO?
Regards,
Konstantin

ECC 6.0 integration with Microsoft Dynamics CRM

Hi All
I am working on a ECC 6.0 integration with Microsoft Dynamics CRM. I need to send the customer master data, va01/va02, vl01n/vl02n/ vf01/vf02 to CRM system. One option I have is to send in the form of IDOC with TRFC - TCP/IP. But looks like this needs a middleware like Biztalk.
Is there a way I can send this data using a Internet service in ECC 6.0 ??? As this would cut the cost of the Biztalk.
I really appriciate your thoughts on this. We don't have XI either.
Thanks a lot
Van

HI Van Dan Jan,
We have just implemented integarion of SAP with Microsoft stack (Microsoft CRM, Share point and Axapta), But in all integration BizTalk as a middleware used.
There is two way requirements :
1. whenever Most of the control are at the Microsoft level like : Customer creation, Creation of orders, which need to be synchronus activity we have used RFC which internally calls BAPI. (So SAP adapter Configured at BizTalk). and whenever Biztalk receives request file from CRM or share point to there location they call SAP RFC's.
2. When DATA is needed from SAP to microsoft stack like to syncronize the missing transaction like customer pad and all.
Scheduled job at BizTalk end which call SAP to get the DATA via RFC mode :
In SAP we have two things
1. if DATA size is small (below 2 MB) like in last 1 hrs what are the sales contract created in SAP that need to updated in Microsoft other system than Biztalk will trigger a job at 1 hr interval or on deemand to get the detail which directly we pick from data base or using BAPI to get the detail via RFC.
2. If Data Size is large (more than 2 MB) like total transation happened in a day for all customers: then we wriiting the data in OS or application server and that job also get initiated from Biztalk end by sending any parameter to SAP.
advantage of using BizTalk is most of the control you can give it to them so they can run there job on deemand basis.
There is a something known as web service we can use to avoid Interfacing tool, but I dont have much Idea about that,
and please check how many interfacing point is there with SAP in your project, because if Interfacing points are more then I think it is not good to write a web services for so many things.
do let me know if you need further information.

ECC 6.0 integration with MS Dynamics CRM 2011 on-demand thru PI

Hi Gurus,
sorry in advance if some of my doubts will appear to you experts as stupid....
Scenario: we're on the way to realize the integration between SAP ECC and Microsoft Dynamics CRM Online (so...in the cloud) using SAP PI 7.11. In our scenario SAP PI will be the client, consuming webservices provided by MS CRM.
Unfortunately during the PI configuration (following SAP HELP instructions) we're facing the following problems:
1. The system (PI, dual-stack installation) has the parameter 'ssl/pse_provider' set to 'ABAP'. Considering that we would like to use SSL with SOAP adapter, questions are:
- Can we use the ABAP stack to maintain the PSEs, or it's mandatory to do it into the AS Java in order to use SSL with SOAP adapter.
- If so, we need to switch the ssl/pse_provider parameter to JAVA. Could this change create some kind of problems?
For information, currently in transaction STRUST we only have a Local node, neither Server nor Client nodes.
2. We have already installed the SAP Cryptographic Library for SSL but:
- In NWA we can't find ICM_SSL_<instance_ID> view or CLIENT_ICM_SSL_<instance_ID> keystore view into the list of Keystore Views.
- We would like to change the default Profile into RZ10 but we Can't find the profile...
- MS CRM (ws server) give us only a public certificate but do we need a private key too or we have to generate it from SAP?
- We need to know if is possible to use the MS 'LIVEID' authentication with SAP PI or SAP ECC.
- Do we need additional modules for the SOAP adapter(maybe an Axis one in order to use soap protocol 1.2)?
Could you please suggest the right configuration and give us some tips about this kind of integration?
Thanks a lot,
MR

Hi Mauro,
Looking at your background I thought maybe you could help me out wit this integration question.
I'm looking for some feedback on how best to integrate Microsoft Dynamics AX (DAX) with SAP CRM. We have a PI server.
From reading on the net, I see many people are using a middleware product called Scribe or BizzTalk. We already made an investment with SAP PI and we'd like to use it.
Do you have any references for Microsoft DAX integration with SAP CRM via SAP PI/ XI?
Thanks in advance!

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

Steps: SNC (Supplier Network Collaboration) Integration with ECC through XI

Hi,
Has anyone worked on the SNC(Supplier Network Collaboration) integration with SAP ECC via SAP XI.
Could you pls share any documentation related to this. And also could anybody tell me the setup required to go ahead with the integration.
Thanks,
S

Hi Xavier,
SNC integration with XI has predefined mappings. So ask your basis guys to download the XI content for SNC using with PI. Once they deployed you will have a builtin predefined content in XI. Within the predefined content mostly they all are xsl mappings.
If your requirement is with the standard idocs then you can use them directly. Else if their is customization they you may need to change the mappings according to your requirements.
Also check this help:
http://help.sap.com/esoa_scm_snc2007/helpdata/en/index.htm
Regards,
---Satish

User license query while integrating with SAP HR system

One of our clients wants to develop web based employee self service applications (web enabled modules) on their existing SAP HR suite.
Currently they are on SAP HR , ECC 5.0
Would they need to buy extra licenses for integration with the existing system or can the existing licenses be used concurrently?
I am not sure where to look for this piece of information. In case this question is inappropriate to this forum my apologies for the same.
Best Regards
Yuvaraj

Yuvaraj,
The best thing would be for your client to contact their SAP account representative and check how many and what type of users their existing licensing agreement with SAP includes.
Best Regards,
Alexandra

Sourcing integration with ECC using PI (percentage rebate scenario)

Hi Experts,
Sourcing - OP 7
ECC - configurations done for rebate conditions as mentioned in standard configuratin guide
PI - SP02 patch 0
We are publishing percentage rebates in Master agreement from sourcing to ECC to create Online Agreement using standard predelivered content for PI from SAP, however ECC returns error in RFC response mentioning
No currency code found for ISO code P1 in field HEADER_CONDITION/CURRENCY_ISO
I checked PI content & I see for % rebates, field HEADER_CONDITION/CURRENCY_ISO is always populated in PI with P1.
What are the next steps to be done in ECC or in PI to overcome the mentioned error.
Any pointers will be appreciated, Thanks.

Hello Jeet,
I would suggest to check first that in both your SAP ERP and SAP Sourcing an ISO Code P1 for percentage exists. Further I would check if a rebate with an absolute amount works fine (also create multiple amounts and check if a scale is created in ERP, just to ensure that it works in general). E.g. check if the price condition/condition type exists and is configured correctly in ERP.
If that all looks good you might want to check the ERP transaction BBP_ES_ANALYZE. I recently created a SDN blog about some tips and tricks, it also explains this transaction, please see ERP integration with SAP Sourcing tips and tricks Maybe the error message(s) in this transaction will help you to better understand what is going on.
Hopes that will help you
Markus

Best practices of integration with SAP Netweaver

Hi All,
I'm totally new to SAP Netweaver but I have a task to integrate our system with SAP ECC (R/3). We are using SAP Netweaver 6.4. The goal of integration is to provide for user list of available modules (Sales and Distribution, Human Resource, Payroll, etc) and when user selected for example Payroll we need to display list of available BAPIs. In general weare able to create Enterprise Web Service for some BAPI and consume it. But the problem is that everytime when administrator changed BAPI process (for example added new field to Business Object) we need to regenerate wsdl and change our client application. Does Netweaver provide some Web Service which can retrieve list of applications, list of BAPI processes and can retrieve meta data of some BAPI? Something like Partner Web Service interface?
We are looking for best practices of integration with SAP Netweaver. We are trying to develop something like adapter which will be able to pull data into SAP ECC system is there any generic way to develop this adapter?
Thanks in advance for your help.
Yura.

Hi Yura !!
As far as I know, this is not possible yet. Using SAP Netweaver XI/PI, although it adds value to the webservice scenario exposing BAPI functionality, it also needs to maintain a refreshed version of the BAPI definition in its repository. Depeding the complexity of the change in the BAPI structure, maybe PI may allow you to continue working without changes.
Maybe a good practice is not to make too much changes to a production BAPI, instead make a review in development environment, and once it is stable, use it in production. Other good practice is to keep older versions of BAPIs and add the changed ones as new versions to have back-compatibility
Regards,
Matias.

Integration with SAP Records Management

Dear SAP gurus,
We are in SRM 7 EHP 1 with backend ECC 6 EHP 5. We are exploring PPS (Procurement for Public Sector) feature in SRM. We see that using PPS we can have integration with SAP Records Management. To be honest, I never see SAP Records Management so we want to confirm the functionality. Our legacy system require a electroning filing system, in which all documents related to procurement is scanned (whether it is document from system, or the one created manually), and then stored in a server in a pdf format.
Does SAP Records Management have this functionality in which it stores the pdf doc inside one server? If not, what is exactly the functionality of SAP Records Management?
Best regards,
John

Hi,
SAP Record Management is now known as SAP NetWeaver Folders Management.
Contact your NetWeaver consultant to imlement SAP NetWeaver Folders Management.
Some important links:
1. http://wiki.sdn.sap.com/wiki/display/HOME/SAPRecordsManagement
2. http://www28.sap.com/businessmaps/0531547C7FE54C6A9E9B5850836F5E43.htm
3. http://help.sap.com/saphelp_nw04/helpdata/en/f5/18fc39eb31a700e10000000a11402f/frameset.htm
Regards,
yaniVy
reward if helps

RoboHelp V6 - Using Context Sensitivity with SAP R/3 ECC 6.0

We are creating online help/procedures using RoboHelp,
Version 6. We are also upgrading from SAP R/3 4.6c to SAP R/3 ECC
6.0. ECC 6.0 has different backend coding than 4.6c that does not
allow us, at the moment, to implement context sensitivity. My
question is this: Can RoboHelp V6 be integrated with SAP R/3 ECC
6.0 that will allow for context sensitivity? Does coding exist for
this to happen? What must take place for this to work properly? Any
assistance would be greatly appreciated.

Welcome to the forum.
I can't help you on the coding side but is using a URL an
option? If it is, then see my site where I explain how to call
webhelp using URLs. That includes how to open the help pointing to
a specific topic, thus giving you context sensitive help.

Integration with POS to SAP 4.7 / ECC 6.0

Similar Messages

Maybe you are looking for