Integration with Third-Party using WLC logs
Hello everyone,
In my scenario, the WLC Controller is in a different part of my network, controlling APs that are all are running in FlexConnect mode.
Between APs and Controller I have WAN connections and a border firewall. I have locally PDC and AAA servers.
The problem is: My wired end users when go to outside zone (from LAN to internet), need do a captive portal authentication that is integrate with AAA server using Radius.
In WLAN network, I have a SSID using 802.1X that use the same VLAN as used by wired. Therefore, users that are using WLAN connections are needing to authenticate twice.
My idea to contour this situation depends the level of logs that WLC can provide me. I had looking for SNMP traps and Syslog (debug level), but neither one log user/IP/MAC. If I had this informations, I can integrate with my firewall border using XML API and bash scripts.
Anyone had this issue? Can help me with suggestion or other ways/ideias?
Kind Regards.
Hello,
I understand that anyone that is using your VLAN (call it VLAN x) toward the internet will be interrupted by the firewall and is directed to a captive portal to provide the credentials.
For those who use WLAN with dot1x, they have to provide credentials twice, once when they authenticate to the WLAN and once when they try to browse internet.
Is that correct?
I think the best solution for you is to utilize a separate VLAN for your WLAN.
If you are looking for user MAC address via SNMP, that is exist AFAIK. What you may need to do is to enable that trap to be sent (not sure if its on or off by default). Go to SNMP config in GUI and then go to snmp trap controls page. There you may be able to allow traps for authenticated and associated clients.
HTH
Amjad
Similar Messages
-
SharePoint 2013 on-premises integration with third party email account
the Email sending issue from SharePoint is causing too much time waste
First let me explain how our SharePoint is deployed
Sharepoint version : 2013
Deployment type : on-premise
Authentication : from Domain controller also hosted locally
domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
SharePoint computer name on local DNS : sharepoint.domain.com
OS and IIS : 2008 r2 , IIS 7.5
Network firewall : 25 26 ports opened for sharepoint , both incoming and outgoing.
Server firewall : turned off
Email configuration Attempts by IIS 6.0
We tried following setting on IIS 6.0 SMTP local server properties
In General tab
qualified name was shown as : sharepoint.dts-solution.com
IP assigned : sharepoint server IP , advanced putted two entries of IP with ports as 25,26
In Access tab
Authentication : selected as Anonymous
Connection : All except below list : empty list
Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
in Delivery tab
outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working
outbound connection: all default values and port = 25
Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked
On sharepoint central management settings
Outbound email = sharepoint.domain.com
from and reply to address = [email protected]
IIS 7.5 SMTP settings
In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port .
Godaddy account
Our website hosted on godaddy with same name as domain.com
open relay not possible on emails.
Results
After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
success.
Tech LearnerHi,
As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
From SharePoint side, I'd suggest you refer to the link below to configure email integration:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
I'd recommend you contact their support engineer for more assistance:
https://support.godaddy.com/help/category/154/email
https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Best practices for apps integration with third party systems ?
Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja -
EP integration with third party BI tools
Hi,
I was looking for information and pointers on EP integration with third party BI tools like Business Objects etc. Would be grateful.
Thanks,
MadhuThanks. We have a full fledged Business Objects reporting environment. My question is: As a beginner in the EP space, I would like to understand how to treat the Business Objects environment as one of the content providers for the Enterprise Portal? Are there any documents or manuals that talk about the integration of EP with Business Objects? I know the question is too broad, but any pointers would be useful.
-
SAP IDM 7.0 integration with third party system
Hi Experts,
I know SAP IDM 7.0 can integrate with third party systems and create user ids on most of the third party systems.
But I need to know regarding If it is possible to integrate with following systems
1) Microsoft Exchange 2007 ( I know till exchange 2003 SAP IDM support )
2) Microsoft Active directory 2008 ( I know till Actice directory 2003)
3) EMC Documentum 6.5
4) ARIS 7.1.0
5) BlackBoard, Release 9.0
6) Oracle 10g ( Is it possible to create users at oracle level ? or at what level ? )
7) Sun Solaris Sparc ( Is it possible to create users at OS level )
If you have information how on this please share. I know that provisioning framework will have templates for most of the target systems. I want to know if they are available for above systems on SAP IDM 7.0 or if not have we can connect to them?Hi Matthew
Your expertise in SAP IDM is indeed a great help!!
>Can't see why not, it's all done via SQL commands. I've done similar things with MSSQL
You mean that there will be oracle 10g drivers/oledb connectors in SAP IDM and in through SQL commands like "create user alfredo identified by alfredos_secret; " we can create user in oracle database ?. As you said this should be possible. What about creating user( user management ) in oracle 10g application like dba or scot and assigning the privileges in oracle application?
>might need to do via UNIX scripts, but it can be done
You mean that Unix scripts will be defined in SAP IDM and SAP IDM will execute these scripts in the Sun Solaris Sparc ?. It should be possible as you said. By the way how we will be able connect to Sun Solaris sparc ? Is it via the option "file " under the "Repositories" with repositories wizard and later executing the file from SAP IDM ?
Thank you once again for your expert answers on third party systems. -
Integration with Third party Help Desk
Hello,
We need to integrate SAp solution Manager 3.2 with third party Help Desk software Like REMEDY ....
So that messages updated in Remedy are updated with Solution manager and vice versa.
Can we have some soltuion on that ?
Deeptilook here:
<a href="http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm">http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm</a> -
R12 iStore integration with third party content management system
We are facing several challenges and are already a month behind for Go-Live with the iStore implementation. Hence, I wanted to check if anyone has worked on a similar setup
1. iStore being used only for cart functionality
2. All content, web pages are on a thrid party site
3. iStore's deep linking is being used for cart updates
4. We have a dmz environment and reverse proxy setup
5. Payments is integrated
We are finding several application errors, there is a loss during the back & forth communication between iStore & third party site. Could somebody please advise if there can be a better setup or if they have implemented a similar network topology.
Thanks.Hi All,
We are also facing same issues(Application Errors) and our setups include third party website linking, DMZ configurations and Reverse Proxy setups. Unable to know the root cause for these application errors as it was intermittent.
Please help me on this.
Regards -
EBP 5.0 integration with Third Party
Hi
We need to integrate EBP with a third part J2EE web based application
INtegration touch point
while creating free text requiistion(indirect material) user need to call the third party application, the thirdparty application will return an aditional value(based on the parameter passed by EBP) which needs to be passed back to the backend system
Can anyone suggest an approach(BADI, BAPI extensions?) as how one should go ahead with INtegration
Thanks in advance
SachinHi Vadim
Thanks a lot ,
here is the functional need
1. while creating a shopping cart in EBP , a user can either search an item from a catalogue
2. if the item is not found user will enter a description for the Item
3. this description needs to be passed to third part J2EE application which will return an additional (Custom)field
4. SO i want to get that custom field returned by J2EE application and update it back to the respective PO which will be created
5. ALso i need to include an UI interface which will allow user to select the value which needs to be returned , so user will explicitly call this J2EE application
CAn i use the standard custom fields for updating the value returned(this will be a numeric value) by the J2EE application
PLease let me know if there are any doubts
looking forward to your answer
Thanks in advance
Sachin -
Realtime data integration with Third party application
A customer wants to send data to a third party application when a user modifies some information on a business object (ie PO Amount, Employee Name etc). How can you trap this change as close to realtime as possible within SAP?
In addition to Senthil's reply, it may also be possible to hook into a workflow event, provided such an event is raised. Whilst I prefer the change pointer approach outlined by Senthil, it does enforce a delay between the "application event" itself and change pointer processing.
To see if a workflow event is raised, in a non-production system, use transaction SWU8 to activate the workflow trace. Next perform the update that you wish to trap. Finally, use transaction SWU9 to display the workflow log. Hopefully you'll see a workflow event raised for your update (for example a CHANGED event).
This will allow you to perform either synchronous or asynchronous processing immediately (the norm is for workflow processing to be triggered immediately but asychronously).
It would be great if all SAP objects supported a common event model, with BADI's for standardised events for create, change, etc. Maybe one day, but not today...
Cheers,
Scott -
Cisco ISE integration with third-party firewalls
Can Cisco ISE be integrated with a third-party firewall (such as Checkpoint), to provide authentication/authorization services to remote VPN user devices (based on device MAC address)?
The remote user would establish a VPN connection to a third-party firewall, based on a username/password authentication, but the user would only be allowed to send/receive traffic to the internal network if the MAC address of the device being used was authorized by Cisco ISE.
Thank you in advance.Rui,
I do not think the vpn client sends the ip address in a called-station-id, that might be the public ip address that the client is initiating the request from. If you have an existing radius server or can run a packet capture you should be able to verify that.
If the client does send the mac address in the radius packet then you can create a custom condition that can be used to check the mac address along with the username to allow it access to the session. However in VPN deployments there is no concept of profiling since 802.1x deployments usually include the client's mac address.
Thanks,
Tarik Admani
*Please rate helpful posts* -
Lync integration with Third-Party mail server's
Hi all,
Does Lync integrates with any third party mail servers?
Or it integrates only with Exchange Server?
Regards,
ArunKumar.JAgree with Thamara. Exchange is the only platform supported for presence as well as voice functionality. The client uses EWS to communicate with the server to check calendar integration, nothing else is going to mimic this properly enough to
avoid issues.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
OAAM Integration with Third Party Authentication tool
Hi Guys,
In our project we are planning to integrate OAAM11GR2 with OIM11GR2 and OAM11GR2 through Advanced integration. We have a requirement to call a third party authentication service from OAAM as a step up authentication for a particular user base (based on the group membership). Kindly suggest if this requirement is feasible and if you can provide any pointers to implement this requirement.
ThanksYes, you can use third party step up authentication.
You can customize the challenge flow. Here is the link.
http://docs.oracle.com/cd/E28389_01/doc.1111/e15480/igotp.htm
(It is for 11gR1 but same applies to 11gR2) -
ChaRM integration with third party tool
Hello,
I have some talks withn customers regarding a scenario where Change Requests comes from a third party tool like HP Demand and Portfolio Management. A possible scenario is when there is a request for change which goes for a complex review and process approval before going directly into the ChaRM creation, without going into a service desk ticket.
I imagine a kind of web service similar to that of the Service Desk but in this case to work with the SDCR or SDHF tickets, so that external systems can interchange data with those Charm tickets. Does anybody face such type of integration?? What other alternative path you follow for this requests which do not come form a incident/problem workflow?
I appreciate your comments.
Regards
Estebanlook here:
<a href="http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm">http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm</a> -
XI interface with third party using Java API
Hi All,
We have the following requirement:
XI needs to interface with an external third party system which has JAVA API capabilities and the corresponding JAR files available to us.
I have seen a few threads where it was mentioned that we could call the Java methods directly in User Defined functions:
Process Integration (PI) & SOA Middleware
My question: Is this approach feasible in our scenario? Also I guess we do not need to configure any adapter for this Java Method call within the UDF.
Your help will be greatly appreciated and rewarded.
Regards,
Jai.Thanks Stefan.
Our requirement has slightly changed. We have installed a thirdparty application on XI Server (within our network , inside filrewall). The application with Java API Jar file. All it does is a Lookup and retruns a value.
We are planning to import the Jar file into imported Archives and call the method within a UDF.
Is this feasible? I am going to give it a try.
Your expert comments are greatly appreciated.
Thanks
Jai -
Sap integration with third party software
hey all,
we are actually trying to integrate sap with EAI( IBM WEBSPERE third party software) and here date needs to flow from EAI - SAP.
and we have done that through BAPI and in the EAI we got a message saying that the data base has been created but infact when i am trying to check the same in my sap screen am not able to find it i have also checked the database table but its not available .
do anyone has any idea as to where do we exactly go and search for a particular data once its transferred from a third party software????
any help is highly appreciated
Thanks & Regards,
Vinila Kanakala.COMMIT WORK is necessary after most BAPIs. What you describe is usually a result of calling BAPI without COMMIT WORK. The message tells you that document was created, but when you look into database, the document is not there.
I'm not sure how to resolve this in case of the 3rd party software though. Maybe instead of just using a plain BAPI you will need to write a custom function module, which will capp BAPI and do COMMIT.
Hope this helps.
Maybe you are looking for
-
Help Please!! my computer won't finish my update for my iphone and it says it needs to restore my iphone. I don't know why it is doing this? If I restore the phone with itunes it will wipe out all my media and contacts and I don't want to do that. Bu
-
I have 16gb of RAM, but only 10gb are usable?
Hello everyone, I have a Mid 2012 15" Macbook Pro running Yosemite. When I first got it, I upgraded to 16gb of 1600 MHz DDR3 RAM because I would be needing it for a lot of the programs I run. I have the 2.3 GHz i7 processor. Stock 500gb hard dri
-
Hello, i have enabled iCloud Photo Library in all my devices as well as in OSX photos app. after a few days, all my devices, including Photos, reads "updated at xx:xx", what supposedly means every device finished uploading photos to icloud. all my iO
-
I setup my yahoo and gmail account on my MacBook Pro but i'm having trouble setting up my me.com email account. It says that the user name and host already appear. Thanks Fabian
-
How to make SAP Instance on Windows without SAPinst (manually)
Dear colleagues! On unix platform It's usually more convenient for me to make an additional sap instance by manually copying of sapmnt, usr and a couple of others folders, making links, editing /etc/services. It's faster than running SAPINST (for me)