(intel 10.4.4) Mail 2.0.6 message search malfunctions...
I've been having a consistent mail search issue with the current Mail program in that it's search function does not work with the "Entire Message" option (only From, To and Subject). Every time I do a search with Entire Message, I get no results. I run the iMac Duo side-by-side with an iBook 12" and it's searches achieve normal (complete) results with the same search using Entire Message. I have the exact same settings and messages on both (IMAP servers, w/ all messages and attachments stored locally, same settings, etc.).
I have done a rebuild of the Spotlight metadata a couple of times (w/ Tiger Cache Cleaner), but didn't help.
any other ideas? (no excited at doing a full reinstall, and would rather find a solution)
hi Blue,
I've got the same problems with Mail. Also, it disconnects me from my incoming mail server randomly. I checked with service provider and hosting company and both are working fine. It seems a software problem.
BTW - if you clean install and have disc 1 = ***-5736-A nothing will happen and will continue to exhibit the same problems.
Similar Messages
-
How can I stop Mail from replicating a message & trying to send?
A few days ago I tried to send out an email with three attachments which totaled over 53 megs. Of course it was too large for the server and I recieved bounce back that the message could not be sent. I then created two seperate messages with the attachments at appropriate sizes. I have multiple email accounts and didn't tink anything of the event other than "I should have checked before sending..."
The next day I started getting the system warnings that there was no available space on my hard drive. The previous day I had over 5 gigs of available space.
After researching a few options I noticed the Mail application was having trouble sending an recieveing from one of the four accounts. Then I spotted the culprit - the account was trying to send out the mail with the 53 meg attachment. It was replicating and storing the message and attachment in the "On My Mac" saved mail folders as "Recovered Mail". It had replicated 100 times - 5 gigs worth. The message was not in my Outbox or Sent mail folders.
When accessing the newly created "Recovered Mail" folder and trying to delete the specific messages the application would crash. The work around was to delete the folder. Howver, the next day the folder re-appered and began populating the hard drive with duplicate files.
- Have tried virus scan (Norton AntiVirus) and using Norton Firewall to lock down all drive to internet traffic (annoying with block / allow mesages).
- Have tried deleting the account and re-creating it.
After a few hours or a day the dreaded "Recovered Mail" file was back and hogging drive space.
The account is accessible from my iPhone and through web browsers with no issues. I can't even find the offending message and attachment. So I suspect there is a bug / corruption in Mail.
HELP!
need to know how to fix it or if I have a new virus.
Thanks!Is this an IMAP account?
If so, delete the messages in Mail from all folders and quit Mail.
Go the the website and clear the messages from all folders there.
Reopen Mail and verify the messages have been deleted for all folders. -
After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic) -
When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
* This site may be experiencing a problem
* The site may not be a member of the Windows Live Network
You can:
* You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" -
My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to initiate setup is that the Apple ID is already in use. Any ideas on how to complete the setup of the new iPad since we both share the e-mail account?
If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other. -
Is it possible to have Thunderbird send an e-mail automatically when a message with a specific subject is received?
I basically want to create a rule that will send an automatically crafted form e-mail to the sender when I receive an e-mail with the subject line "New Swimmer". Is this possible?Thank you Todd, I was able to get it to work but I do have a few more questions...
1) When I tested this, at the top of the message, before any of the text I created, this showed up: This is a multi-part message in MIME format. --------------040406040801080102080500 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
2) After the signature line, this showed up: --------------040406040801080102080500 Content-Type: image/jpeg Content-Transfer-Encoding: base64 Content-ID: /9j/4AAQSkZJRgABAQEAYABgAAD/4QAiRXhpZgAATU0AKgAAAAgAAQESAAMAAAABAAEAAAAA AAD/2wBDAAIBAQIBAQICAgICAgICAwUDAwMDAwYEBAMFBwYHBwcGBwcICQsJCAgKCAcHCg0K CgsMDAwMBwkODw0MDgsMDAz/2wBDAQICAgMDAwYDAwYMCAcIDAwMDAwMDAwMDAwMDAwMDAwM DAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAz/wAARCAC5ApUDASIAAhEBAxEB/8QA HwAAAQUBAQEBAQEAAAAAAAAAAAECAwQFBgcICQoL/8QAtRAAAgEDAwIEAwUFBAQAAAF9AQID AAQRBRIhMUEGE1FhByJxFDKBkaEII0KxwRVS0fAkM2JyggkKFhcYGRolJicoKSo0NTY3ODk6 Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZmqKjpKWm p6ipqrKztLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6/
(It was actually much longer than that)
Is there anyway that I can get that to go away? I obviously would prefer a nice, cleanly formatted e-mail to be sent just like I would send if I were creating it on the spot.
Thanks,
Evan -
My mail is getting stuck in outbox, but I am receiving mail just fine. Message says 'server timed out'. What can i do to fix this?
Hello Naila1,
It sounds like you are unable to send emails, as they go straight to the outbox, but you can get the emails without issue. I recommend using the Connection Doctor to help you troubleshoot what is happening with the following article:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thank you for using Apple Support Communities.
Take care,
Sterling -
I can no longer send mail....today I cannot get mail..., I can no longer send mail....today I cannot get mail...a message pops up that says:A copy has been placed in your outbox.Sending the message content to the server failed....any help?
How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.
-
Mail no longer does Entire Message search
I am no longer able to get Mail to do an "Entire Message" search. When I type a word in the Search box, the 'Entire Message' button appears "grayed out", and the only options available with All Mailboxes are From, To, and Subject. I did a Rebuild, I checked the settings in Preferences for searching Trash, Junk, Encrypted Messages (not that those should matter), I'm using a POP server, etc This seems to have just started since the 10.5.7 update. (help! thanks <Edited by Host>)
bbbbobbb,
Quit Mail, open System Preferences>Spotlight>Privacy, and add your Macintosh HD to the list. Wait a couple of minutes, and then remove your Macintosh HD from the Privacy list. You should notice (after a short delay) that Spotlight is reindexing your HD. After Spotlight completes the index, open Mail and see if your search works.
;~) -
Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?
Outlook 2013. Under Start Up Options, I have checked "Make Outlook the default program for E-mail, Contacts, and Calendar".
-
After upgrading to Snow Leopard, Mail will not let me archive any mail. All archived messages re-appear in my inbox (I have tried archiving and placing in the trash bin). How do i regain control of my inbox?
The main differences that can cause a problem are scripting additions (64-bit vs 32-bit and security reasons) and the usage of dates (it is not as forgiving). AppleScript itself is basically the same, so if empty paragraphs are what caused your problems the update would have just been a coincidence.
-
I have just bought a Macbook Pro and sync data from my old version onto the new one...However when I tried opening the mail client...Message window does not appear. The old Macbook Pro I was using used Snow Leopard. Now with the new it is a Lion. Toruble now when I click onto new message window I have the spinning icon which show it is trying to load. However it fails and Im left with having to Force Quit it. How can I resolve this problem
Tunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases. -
I have duplicate mail accounts and deleted messages keep redownloading in gmail
I am using Mountain Lion and I have a me.com email account, gmail account, and sbcglobal.net account. I set up my accounts in iMail and I use iCloud, but now I have duplicate mail accounts and every time I delete messages from my gmail account, the next time I go into Mail, all the deleted messages are back in my gmail account. How do I stop this from happening and how do I make it so that I don't have duplicates of everything!
All 3 email accounts show up under Inbox, but all three also show up as iCloud, sbcglobal.net, and gmail. The iCloud account will occasionally get duplicates, the sbcglobal.net account only gets mail that sbcglobal.net has put into a "bulk" folder and seems to be all junk mail and does not show up in the sbcglobal.net inbox account and the gmail shows up in both places, but I can delete messages in the gmail inbox account and they do not download again, but the second gmail account is the one that keeps redownloading the already deleted messages into the gmail "all mail" folder. I have tried deleting the gmail account and have gone to gmail's help page, but they are behind with set up for Mac Mail. The set up is for Mail 3.0 and not 6.2. It keeps downloading over a thousand emails into this gmail "all mail" folder. Is there any way to stop this?
-
How to configure Symantec Mail Security for SMTP & Messaging Server 6.3
Hi!
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.
- Could you help me with this issue?,
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.
Regards, CRctemp1 wrote:
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.I take it that you have configured the symantec software like this?
internet -> symantec mail security system -> sun messaging server -> recipientA better approach is the following
internet -> sun messaging server -> recipient
|
V
symantec mail security system(refer here: http://blogs.sun.com/factotum/entry/messaging_server_correctly_deploying_the)
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.There is no documentation specifically for symantec software but we do document how to send emails via the symantec mail security server using the aliasdetourhost channel keyword:
http://docs.sun.com/app/docs/doc/819-4428/6n6j42615?a=view#bgaqy
Regards,
Shane. -
10.9.2 Mail - Shows 5 flagged messages; clicked - no messages in the list
My upgrade from OS X Lion 10.7.5 to OS X Mavericks 10.9.2 was fairly straightforward. No major issues.
However, Mail shows 5 flagged messages. When clicking on Flagged indicator, there are no message in the list. Strange. Everything else appears to work as expected.Is an external display connected and turned off? If not, open Mission Control. Do you see the window(s) in any other spaces?
Maybe you are looking for
-
How to generate a PDF view in flex?
The text should be selectable and the selected text should span across multiple pages. There will be a page break between two pages, when selected and dragged on the text n the first page, the selection should carry to the second page as well.
-
Constant Purple & Orange Flashing light on BTHH3
We're currently experiencing problems with our line. No internet. As mentioned on the subject, the light on the Hub3 is constantly flashing purple and orange. On the white Openreach modem, the LED light labeled DSL will blink for a few of seconds, th
-
Can't stop auto email from support community
Couple of days ago I was logged on to the Apple Support Communities. Apparently while there I clicked on a wrong link and have been getting dozens Emails concerning questions from that particular group. I logged in to my PROFILE and revised e
-
Dear All, While we are entering data in F-02, we have to Give GL accounts and posting keys 2 times, in lsmw after recording , while field mapping system is giving only one field name for gl account , and only one field name for posting key, whe
-
Will iPhoto store raw photos shot from a Canon or Nikon camera? Thanks.