Intel 3945ABG wireless adapter

I have a wireless adapter problem.
I am unable connect to my wireless modem using the wireless adapter. I can only connect with the Ethernet adapter and cable. I am unable to renew or release an IP address or get a manually set IP to work on the wireless network. Another laptop computer connects to the wireless modem fine.
I tried downloading and installing the adapter driver from Lenovo, but that failed halfway through unpacking and transferring to the hard drive, with the message "access is denied" on C:\SWTOOLS\DRIVERS\WLLANINT\Vista\Apps\v32\Thumbs.db.
Does anyone have any ideas about my wireless network problem or how to successfully install a new driver?
Many thanks
Gil Lambert

delete the thumb file then try to re-install.
by the way, do not forget to switch the wireless button ( probably front side of your computer ) and make sure you activate wireless by pressing fn + f5 ( also make sure your function keys are working, if not, re-install power management )

Similar Messages

Event ID 1 for Intel Bluetooth Wireless High Speed after Windows Update

After the automatic update for Windows I received the following error message in the Event viewer, telling me that Intel Bluethooth Wireless High Speed has to be reinstalled after the update.
How do I reinstall Intel Bluethooth Wireless High Speed on my notebook?
Source: ApplicationExperienceInfrastructure
"Bei der Anwendung (Intel Bluethooth Wireless High Speed, von Lieferant Intel) sind folgende Probleme aufgetreten: Um eine einwandfreie Funktion zu gewhrleisten, muss Intel Bluethooth Wireless High Speed nach der Aktualisierung von Windows neu installiert werden."
+ System
- EventData
DBType 15
AppNameCount 36
AppName Intel Bluetooth Wireless High Speed
VendorNameCount 6
VendorName Intel
SummaryCount 149
Summary Um eine einwandfreie Funktion zu gewhrleisten, muss Intel Bluetooth Wireless High Speed nach der Aktualisierung von Windows neu installiert werden.
SessionID 0

Yeah, I tried it exactly as described.
I use the Satellite U940-11X (PSU6SE) which has as network adapters the Realtek PCIe FE Family Controler and the Intel Centrino Wireless Adapter N 2230. The OS platform is Windows 8, 64bit.
I first uninstalled the existing Intel Bluetooth driver, then the Intel ProSet Wireless software.
I downloaded the newest software from Intel's website which is:
- BT_2.6.1212_e64.exe, version 2.6.1212, 19-3-2013, for the Intel bluetooth software and
- Wireless_15.6.1_e64.exe, version 15.6.1, 19-3-2013, for the Intel PROSet/Wireless Software and Drivers
I have installed both software packages correctly and did not receive any error messages.
The installation seems to be faultless.
However, the bluetooth switch in PC settings (wireless tab) remains gray.
I cannot switch it from off to on.
In the device manager the bluetooth button is listed under hidden devices.
Where is the mistake?
Is it possible that my notebook requires specially modified drivers from the Toshiba website and/or additional drivers like to "bluetooth filter driver package" provided by Toshiba for my notebook model?
As to the bluetooth filter driver package it reads on the website that this driver is needed to enable bluetooth on your Atheros wlan-combo-card.
I am confused now because the notebook Satellite U940 11X (PSU6SE) doesn't have the Atheros card.
Any advice for me?
Thanks in advance
Rafu
Message was edited by: Rafu

Intel PRO/Wireless 3945ABG Crashes XP-Pro T61

I recently updated my windows XP Pro SP2 version of windows to SP3. When I went to connect my wireless, it successfully connected, but then I got the BSOD suggesting I uninstall any recently installed h/w or s/w. Windows error reporting suggested a wireless adapter problem, and sure enough, as soon as I disabled the Intel® PRO/Wireless 3945ABG Network Connection adapter, the crashing stopped. So I went into device drivers, and attempted to update the driver, but was told that it was already updated.
Then I went to Intel’s website and found a couple of updates, but they indicated:
“The driver version of the following products will not update. The Intel PROSet/Wireless WiFi Software version will be updated.
Intel® PRO/Wireless 3945ABG Network Connection”
So since I prefer to use the ThinkVantage Access connections, I decided to run ThinkVantage System Update, but got the message: “An error occurred while gathering user information.” So I was going to try the solution George had given me a few days ago to solve my “T42 will not connect to secure home wireless/ThinkVantage Access Connections Freezes” problem:
Of downloading the latest version of System Update from here:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013489
But I wasn’t sure that would work for my T61 Type 7665-CTO s/n **-***** 08/05. Product ID 7665WZK.
Moderator note: serial number removed for member's protection.

'afternoon.
first, you should edit your post to remove your serial number.
next, the version of TVSU you linked is correct for your XP machine. the version for win7 was just updated to v5.
finally, if you want to bypass TVSU, for now, you can get any drivers for your PC from the driver matrix here:
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-67853
looks like the WLAN driver pack you could use is v14.03.000 available here:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS030245
hth.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Unable to autoconnect to Wifi network after installing Windows update 8.1 - Toshiba Satellite - Intel Pro/Wireless 3945ABG-netwerkverbinding

Hello, got a problem connecting to my wifi: every time I start up my Laptop (5 year old Toshiba Satellite L300) the wificonnections are listed but windows is unable to connect to the WIFI. Wificonnection states unable to connect, after running Windows Network
Control the issue is found en the WIFI connects correctly.
I need to run the troubleshooter every time after staring up windows in order to get my wifi running, this is rather annoying..
Does anybody have a solution? I downloaded and installed the latest driver from intel, and also tried to enter below without any improvement.
netsh winsock reset catalog (reset winsock entries)
netsh int ip reset reset.log hit (reset TCP/IP stack)
see below error report:

Hi,
With the google translate, It seems that you are facing with the following problem:
A network cable is not connected correctly or may be damaged
Problem with wireless adapter or access point
For this issue, I suggest you try the following steps:
Try with another account, or test with another system, another cable.
Reinstall network adapter.
Open Device Manager then Network Adaptors, find the wireless NIC and choose properties then open the power management tab and uncheck the one that says "Allow the computer to turn off this device to save power".
Test this issue in safe mode with networking
Windows Startup Settings (including safe mode)
http://windows.microsoft.com/en-IN/windows-8/windows-startup-settings-including-safe-mode
Does this work? and I would be appreciate if you could update the diagnostics with English.
Regards,
Yolandac

New Intel WIFI Wireless Network Adapter does not recognize Wireless Router

I have had a Linksys BEFW11S4 Version 4 Wireless router for quite some time. It works like a champ and I have one Laptop wired to it and a second using Wireless working just fine. Recently, I received a new ThinkPad W500 Laptop with an Intel WIFI Link 5100 AGN wireless network adapter. The older laptop that works just fine with the router uses a
11a/b/g Wireless LAN Mini PCI Express Adapter by Atheros. However, the NEW laptop with the Intel Adapter fails to connect to the Router. It will either indicate a failure while "Waiting for Association" or it will indicate a failure when waiting to "renew IP Address". Sometimes, it will show a signal strength close to ZERO (Even as the older laptop with the other adapter is showing a signal strength close to 100%) When I called Linksys support, I was told that the facts that the Router (a) works find with the wired Laptop and (b) works fine with the 11a/b/g NEtwork Adapter and (c) works fine when WIRED to the new laptop all indicate that the problem is NOT with the router at all -- but with the Network Adapter. Can anyone tell me what has to be adjusted in the Adapter settings? Right now, I am using IBM Access Connections for BOTH of the wireless laptops. I have made sure to set IDENTICAL values for SSID and WEP (128-bit) [static] password. I have also ensured that all OTHER settings are the same for the two laptops. Yet, in one laptop, there is NO PROBLEM while in the other, I can not get the Wireless Adapter to "see" the signal from the Router. TO further check this, I have [temporarily] disabled the WEP password, enabled SSID broadcast, and disabled the MAC address restrictions that I put in (so that the system would be totally "open") yet the Intel Adapter STILL did not "find" anything. In addition, when I use the "Find WIFI" feature in Access Connections, I find that SOMETIMES the network with SSID is found and sometimes, it will display "unknown network" and not pick up the SSID.
This is all very frustrating. If anyone has experience with the Intel WIFI Link 5100 AGN Adapter, I would appreciate any hints, tricks, ideas, etc.
Think you!!!!
--Zvi

I installed the LATEST version of IBM Access Connections as well as verifying that I have teh LATEST drivers for the Intel Wireless NEtwork Adapter.
What now happens is that I am able to authenticate to the Router. However, I get a failure on "renewing IP Address" -- which [according to the diagnostic message] means that the Rotuer fails to provide me with an IP address to use. Do you have any suggestions?

X201 wireless adapter : Thinkpad vs intel centrino?

Hi- I am going to purchase a X201 laptop- but am confused about the wireless adapter option. There is the thinkpad bgn and then intel centrino wireless, advanced and ultimate "n" . The help buttons are of no help. Under what circumstances would I need to opt for one of the intel centrino adaptes? Are they faster or more compatible?

Well I'm not and expert, but in a nutshell, with the right antenna setup and router/access point for each, you get speeds up to:
• ThinkPad Wireless BGN
• Intel® Centrino® Wireless-N 1000 BGN
• Intel® Centrino® Advanced-N 6200 AGN
• Intel® Centrino® Ultimate-N 6300 AGN
• Intel® Centrino® Advanced-N + WiMAX 6250 AGN
ThinkPad Wireless BGN: 150Mpbs transmit/300Mbps receive (Realtek-based last I heard).
Intel® Centrino® Wireless-N 1000 BGN: 150Mbps transmit/300Mbps receive.
Intel® Centrino® Advanced-N 6200 AGN: 300Mbps transmit and receive.
Intel® Centrino® Ultimate-N 6300 AGN: 450Mbps transmit and receive.
Intel® Centrino® Advanced-N + WiMAX 6250 AGN: Adds WiMAX.
These are theoretical maximum speeds and of course the real world rate is lower and ymwv.
I don't work for Lenovo. I'm a crazy volunteer!

Intel Pro wireless 3945ABG and WPA 2 Question

I see that Intel says this adapter is compatible with WPA2 but I can only find WPA support in the Lenovo driver download. Without WPA2 AES I can't connect this laptop to many of the newer N wireless routers. Has anyone found a driver that support WPA 2?
Solved!
Go to Solution.

Welcome to the forum!
I'm not sure I quite understand your dilemma...any Lenovo driver for this card will enable the type of encryption that you're looking for...typing this on a X60s with the exact same card and connected to the WPA-PSK network...
I'm using Windows to configure my networks, not Access Connections.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

[SOLVED] Authentication with AP on 3.6.* with Intel Wireless adapter

Edit 06/2014: Solved ages ago via 3.10+
Kernels tested: 3.6.2-1, 3.6.3-1, 3.6.4-1.
After the latest kernel upgrade my wireless can't authenticate with my AP, wicd-gtk hangs on "authenticating" and then says "bad password".
lspci -vnn | grep -i net
02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] [8086:0083]
A snip from /var/log/messages showing errors at boot. The last messages just repeat continuously.
Oct 16 14:52:44 localhost kernel: [ 9.337732] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 3513
8
Oct 16 14:52:44 localhost kernel: [ 10.079892] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Oct 16 14:52:44 localhost kernel: [ 10.079898] iwldvm: Copyright(c) 2003-2012 Intel Corporation
Oct 16 14:52:44 localhost kernel: [ 10.079930] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
Oct 16 14:52:44 localhost kernel: [ 10.079933] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
Oct 16 14:52:44 localhost kernel: [ 10.079935] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
Oct 16 14:52:44 localhost kernel: [ 10.079937] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
Oct 16 14:52:44 localhost kernel: [ 10.079938] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
Oct 16 14:52:44 localhost kernel: [ 10.079941] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 100
0 BGN, REV=0x6C
Oct 16 14:52:44 localhost kernel: [ 10.080008] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:44 localhost kernel: [ 10.087424] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
Oct 16 14:52:44 localhost kernel: [ 10.100826] iwlwifi 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
Oct 16 14:52:44 localhost kernel: [ 10.100828] iwlwifi 0000:02:00.0: Device SKU: 0x50
Oct 16 14:52:44 localhost kernel: [ 10.100830] iwlwifi 0000:02:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
Oct 16 14:52:44 localhost kernel: [ 15.821575] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:44 localhost kernel: [ 15.829048] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:44 localhost kernel: [ 15.879478] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:44 localhost kernel: [ 15.886902] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:44 localhost acpid: starting up with netlink and the input layer
Oct 16 14:52:44 localhost acpid: 4 rules loaded
Oct 16 14:52:44 localhost acpid: waiting for events: event logging is off
Oct 16 14:52:53 localhost kernel: [ 25.219799] jme 0000:04:00.5: eth0: Link is down
Oct 16 14:52:53 localhost acpid: client connected from 600[0:10]
Oct 16 14:52:53 localhost acpid: 1 client rule loaded
Oct 16 14:52:56 localhost kernel: [ 28.035738] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:56 localhost kernel: [ 28.043276] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:56 localhost kernel: [ 28.268085] jme 0000:04:00.5: eth0: Link is down
Oct 16 14:52:56 localhost kernel: [ 28.309378] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:56 localhost kernel: [ 28.316816] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:59 localhost kernel: [ 31.543667] wlan0: authenticate with 84:c9:b2:b8:cb:f0
Oct 16 14:53:01 localhost kernel: [ 33.551368] wlan0: failed to insert STA entry for the AP (error -5)
Oct 16 14:53:01 localhost kernel: [ 33.551710] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:01 localhost kernel: [ 33.551758] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:01 localhost kernel: [ 33.559158] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:03 localhost kernel: [ 35.603895] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:03 localhost kernel: [ 35.603953] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:03 localhost kernel: [ 35.611394] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:05 localhost kernel: [ 37.656025] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:05 localhost kernel: [ 37.656093] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:06 localhost kernel: [ 37.663560] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:08 localhost kernel: [ 39.708223] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:08 localhost kernel: [ 39.708277] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:08 localhost kernel: [ 39.715713] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:10 localhost kernel: [ 41.760384] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:10 localhost kernel: [ 41.760415] ------------[ cut here ]------------
Oct 16 14:53:10 localhost kernel: [ 41.760424] WARNING: at drivers/net/wireless/iwlwifi/dvm/../iwl-trans.h:607 iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]()
Oct 16 14:53:10 localhost kernel: [ 41.760425] Hardware name: K52F
Oct 16 14:53:10 localhost kernel: [ 41.760432] iwl_trans_wait_tx_queue_empty bad state = 0
Oct 16 14:53:10 localhost kernel: [ 41.760435] Modules linked in: reiserfs arc4 iwldvm mac80211 uvcvideo jme iwlwifi videobuf2_vmalloc videobuf2_memops videobuf2_core videodev joydev snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec acpi_cpufreq snd_pcm snd_page_alloc snd_hwdep snd_timer snd jmb38x_ms serio_raw media sdhci_pci asus_laptop iTCO_wdt iTCO_vendor_support cfg80211 mperf sdhci mei intel_ips lpc_ich mmc_core i2c_i801 mii soundcore microcode kvm_intel psmouse memstick input_polldev evdev processor kvm ac thermal battery sparse_keymap coretemp crc32c_intel rfkill tun loop ext4 crc16 jbd2 mbcache sr_mod sd_mod cdrom ahci libahci libata scsi_mod ehci_hcd usbcore usb_common i915 video button i2c_algo_bit intel_agp intel_gtt drm_kms_helper drm agpgart i2c_core
Oct 16 14:53:10 localhost kernel: [ 41.760539] Pid: 658, comm: wpa_supplicant Not tainted 3.6.2-1-ARCH #1
Oct 16 14:53:10 localhost kernel: [ 41.760542] Call Trace:
Oct 16 14:53:10 localhost kernel: [ 41.760554] [<c0139f22>] warn_slowpath_common+0x72/0xa0
Oct 16 14:53:10 localhost kernel: [ 41.760565] [<fa8e4922>] ? iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]
Oct 16 14:53:10 localhost kernel: [ 41.760574] [<fa8e4922>] ? iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]
Oct 16 14:53:10 localhost kernel: [ 41.760579] [<c0139ff3>] warn_slowpath_fmt+0x33/0x40
Oct 16 14:53:10 localhost kernel: [ 41.760588] [<fa8e4922>] iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]
Oct 16 14:53:10 localhost kernel: [ 41.760608] [<fa840803>] __ieee80211_recalc_idle+0x1f3/0x2d0 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760626] [<fa84112a>] ieee80211_recalc_idle+0x2a/0x50 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760642] [<fa83942e>] __ieee80211_start_scan+0xfe/0x510 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760659] [<fa83a37e>] ieee80211_request_scan+0x2e/0x50 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760677] [<fa846f29>] ieee80211_scan+0x69/0x80 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760693] [<f9864178>] cfg80211_wext_siwscan+0x248/0x2e0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760700] [<c02294ed>] ? __kmalloc+0x12d/0x160
Oct 16 14:53:10 localhost kernel: [ 41.760713] [<f9863f30>] ? cfg80211_find_vendor_ie+0xc0/0xc0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760722] [<c04ad214>] ioctl_standard_call+0x2d4/0x3c0
Oct 16 14:53:10 localhost kernel: [ 41.760729] [<c04d0fc3>] ? schedule+0x23/0x60
Oct 16 14:53:10 localhost kernel: [ 41.760741] [<f9863f30>] ? cfg80211_find_vendor_ie+0xc0/0xc0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760748] [<c04ad4fd>] wext_handle_ioctl+0x1fd/0x230
Oct 16 14:53:10 localhost kernel: [ 41.760760] [<f9863f30>] ? cfg80211_find_vendor_ie+0xc0/0xc0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760768] [<c03f8cc3>] dev_ioctl+0xb3/0x4e0
Oct 16 14:53:10 localhost kernel: [ 41.760776] [<c03e3f4d>] ? sys_sendto+0xfd/0x140
Oct 16 14:53:10 localhost kernel: [ 41.760784] [<c03e2025>] sock_ioctl+0x85/0x260
Oct 16 14:53:10 localhost kernel: [ 41.760790] [<c03e1fa0>] ? sock_fasync+0x90/0x90
Oct 16 14:53:10 localhost kernel: [ 41.760796] [<c0243eca>] do_vfs_ioctl+0x7a/0x570
Oct 16 14:53:10 localhost kernel: [ 41.760804] [<c02f70e1>] ? copy_to_user+0x31/0x50
Oct 16 14:53:10 localhost kernel: [ 41.760813] [<c01855b7>] ? getnstimeofday+0x47/0x130
Oct 16 14:53:10 localhost kernel: [ 41.760819] [<c0244428>] sys_ioctl+0x68/0x80
Oct 16 14:53:10 localhost kernel: [ 41.760826] [<c04d7e1f>] sysenter_do_call+0x12/0x28
Oct 16 14:53:10 localhost kernel: [ 41.760830] ---[ end trace 004dc83771a21a26 ]---
Oct 16 14:53:10 localhost kernel: [ 41.760841] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
Oct 16 14:53:10 localhost kernel: [ 41.760938] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:10 localhost kernel: [ 41.768376] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:12 localhost kernel: [ 43.825863] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:12 localhost kernel: [ 43.825917] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:12 localhost kernel: [ 43.833397] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:14 localhost kernel: [ 45.881485] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:14 localhost kernel: [ 45.881488] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
Oct 16 14:53:14 localhost kernel: [ 45.881593] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:14 localhost kernel: [ 45.889068] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:16 localhost kernel: [ 47.940286] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:16 localhost kernel: [ 47.940344] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
dmesg output (this repeats also)
[ 81.793548] iwlwifi 0000:02:00.0: Loaded firmware version: 39.31.5.1 build 35138
[ 81.796181] iwlwifi 0000:02:00.0: Start IWL Error Log Dump:
[ 81.798709] iwlwifi 0000:02:00.0: Status: 0x0000204C, count: 5
[ 81.801253] iwlwifi 0000:02:00.0: 0x00000005 | SYSASSERT
[ 81.803780] iwlwifi 0000:02:00.0: 0x0001E404 | uPc
[ 81.806261] iwlwifi 0000:02:00.0: 0x0001E3E8 | branchlink1
[ 81.808719] iwlwifi 0000:02:00.0: 0x0001E3E8 | branchlink2
[ 81.811080] iwlwifi 0000:02:00.0: 0x00000826 | interruptlink1
[ 81.813361] iwlwifi 0000:02:00.0: 0x00000000 | interruptlink2
[ 81.815543] iwlwifi 0000:02:00.0: 0x0000020D | data1
[ 81.817643] iwlwifi 0000:02:00.0: 0x00000009 | data2
[ 81.819695] iwlwifi 0000:02:00.0: 0x0000020D | line
[ 81.821702] iwlwifi 0000:02:00.0: 0x000186E0 | beacon time
[ 81.823683] iwlwifi 0000:02:00.0: 0x00000920 | tsf low
[ 81.825611] iwlwifi 0000:02:00.0: 0x00000000 | tsf hi
[ 81.827480] iwlwifi 0000:02:00.0: 0x00000000 | time gp1
[ 81.829333] iwlwifi 0000:02:00.0: 0x0000BE04 | time gp2
[ 81.831170] iwlwifi 0000:02:00.0: 0x00000000 | time gp3
[ 81.833008] iwlwifi 0000:02:00.0: 0x0001271F | uCode version
[ 81.834856] iwlwifi 0000:02:00.0: 0x0000006C | hw version
[ 81.836706] iwlwifi 0000:02:00.0: 0x00C8330C | board version
[ 81.838560] iwlwifi 0000:02:00.0: 0x04150010 | hcmd
[ 81.840401] iwlwifi 0000:02:00.0: 0x00022080 | isr0
[ 81.842231] iwlwifi 0000:02:00.0: 0x00000000 | isr1
[ 81.844048] iwlwifi 0000:02:00.0: 0x00000002 | isr2
[ 81.845845] iwlwifi 0000:02:00.0: 0x0040D440 | isr3
[ 81.847639] iwlwifi 0000:02:00.0: 0x00200080 | isr4
[ 81.849426] iwlwifi 0000:02:00.0: 0x01000002 | isr_pref
[ 81.851216] iwlwifi 0000:02:00.0: 0x000114DA | wait_event
[ 81.853015] iwlwifi 0000:02:00.0: 0x00000000 | l2p_control
[ 81.854816] iwlwifi 0000:02:00.0: 0x00000000 | l2p_duration
[ 81.856637] iwlwifi 0000:02:00.0: 0x00000000 | l2p_mhvalid
[ 81.858438] iwlwifi 0000:02:00.0: 0x00000000 | l2p_addr_match
[ 81.860230] iwlwifi 0000:02:00.0: 0x00000005 | lmpm_pmg_sel
[ 81.862012] iwlwifi 0000:02:00.0: 0x10021644 | timestamp
[ 81.863786] iwlwifi 0000:02:00.0: 0x00001020 | flow_handler
[ 81.865622] iwlwifi 0000:02:00.0: Start IWL Event Log Dump: display last 20 entries
[ 81.867473] iwlwifi 0000:02:00.0: EVT_LOGT:0000047246:0x0000000f:0484
[ 81.869314] iwlwifi 0000:02:00.0: EVT_LOGT:0000047256:0x00000010:0484
[ 81.871100] iwlwifi 0000:02:00.0: EVT_LOGT:0000047269:0x00000015:0484
[ 81.872853] iwlwifi 0000:02:00.0: EVT_LOGT:0000047280:0x00000016:0484
[ 81.874572] iwlwifi 0000:02:00.0: EVT_LOGT:0000047290:0x00000017:0484
[ 81.876261] iwlwifi 0000:02:00.0: EVT_LOGT:0000047301:0x00000018:0484
[ 81.877917] iwlwifi 0000:02:00.0: EVT_LOGT:0000047306:0x00000019:0484
[ 81.879530] iwlwifi 0000:02:00.0: EVT_LOGT:0000047312:0x000001c9:1108
[ 81.881116] iwlwifi 0000:02:00.0: EVT_LOGT:0000047313:0x00000024:1108
[ 81.882667] iwlwifi 0000:02:00.0: EVT_LOGT:0000047313:0x00000001:1108
[ 81.884192] iwlwifi 0000:02:00.0: EVT_LOGT:0000047314:0x00000033:1108
[ 81.885679] iwlwifi 0000:02:00.0: EVT_LOGT:0000047319:0x0002000d:0464
[ 81.887129] iwlwifi 0000:02:00.0: EVT_LOGT:0000047320:0x0000000d:0462
[ 81.888553] iwlwifi 0000:02:00.0: EVT_LOGT:0000047339:0x00002806:1062
[ 81.889959] iwlwifi 0000:02:00.0: EVT_LOGT:0000047343:0x02020202:1074
[ 81.891368] iwlwifi 0000:02:00.0: EVT_LOGT:0000048434:0x00000325:1074
[ 81.892767] iwlwifi 0000:02:00.0: EVT_LOGT:0000048483:0x000001a4:0602
[ 81.894182] iwlwifi 0000:02:00.0: EVT_LOGT:0000048638:0x04150010:0401
[ 81.895595] iwlwifi 0000:02:00.0: EVT_LOGT:0000048640:0x0000000d:0451
[ 81.897017] iwlwifi 0000:02:00.0: EVT_LOGT:0000048646:0x00000000:0125
[ 83.703038] iwlwifi 0000:02:00.0: Error sending REPLY_RXON: time out after 2000ms.
[ 83.704232] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 21 write_ptr 22
[ 83.705636] iwlwifi 0000:02:00.0: Error clearing ASSOC_MSK on BSS (-110)
[ 83.707703] ieee80211 phy0: Hardware restart was requested
[ 83.707758] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 83.715263] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[ 83.779279] iwlwifi 0000:02:00.0: Microcode SW error detected. Restarting 0x2000000.
[ 83.780573] iwlwifi 0000:02:00.0: CSR values:
[ 83.782128] iwlwifi 0000:02:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG)
[ 83.783982] iwlwifi 0000:02:00.0: CSR_HW_IF_CONFIG_REG: 0X00c8330c
[ 83.785851] iwlwifi 0000:02:00.0: CSR_INT_COALESCING: 0X00000040
[ 83.787730] iwlwifi 0000:02:00.0: CSR_INT: 0X00000000
[ 83.789610] iwlwifi 0000:02:00.0: CSR_INT_MASK: 0X00000000
[ 83.791486] iwlwifi 0000:02:00.0: CSR_FH_INT_STATUS: 0X00000000
[ 83.793353] iwlwifi 0000:02:00.0: CSR_GPIO_IN: 0X00000000
[ 83.795234] iwlwifi 0000:02:00.0: CSR_RESET: 0X00000000
[ 83.797121] iwlwifi 0000:02:00.0: CSR_GP_CNTRL: 0X080403c5
[ 83.799023] iwlwifi 0000:02:00.0: CSR_HW_REV: 0X0000006c
[ 83.800936] iwlwifi 0000:02:00.0: CSR_EEPROM_REG: 0X00001885
[ 83.802860] iwlwifi 0000:02:00.0: CSR_EEPROM_GP: 0X90000001
[ 83.804785] iwlwifi 0000:02:00.0: CSR_OTP_GP_REG: 0X00010001
[ 83.806720] iwlwifi 0000:02:00.0: CSR_GIO_REG: 0X00080044
[ 83.808653] iwlwifi 0000:02:00.0: CSR_GP_UCODE_REG: 0X00000010
[ 83.810592] iwlwifi 0000:02:00.0: CSR_GP_DRIVER_REG: 0X00000000
[ 83.812535] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP1: 0X00000000
[ 83.814490] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP2: 0X00000000
[ 83.816425] iwlwifi 0000:02:00.0: CSR_LED_REG: 0X00000078
[ 83.818360] iwlwifi 0000:02:00.0: CSR_DRAM_INT_TBL_REG: 0X88032ccf
[ 83.820300] iwlwifi 0000:02:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200
[ 83.822206] iwlwifi 0000:02:00.0: CSR_ANA_PLL_CFG: 0X00880300
[ 83.824092] iwlwifi 0000:02:00.0: CSR_HW_REV_WA_REG: 0X0001001a
[ 83.825997] iwlwifi 0000:02:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0000
[ 83.827923] iwlwifi 0000:02:00.0: FH register values:
[ 83.829885] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X032d5a00
[ 83.831941] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X0032dbd0
[ 83.834023] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000010
[ 83.836138] iwlwifi 0000:02:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80811104
[ 83.838284] iwlwifi 0000:02:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc
[ 83.840464] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000
[ 83.842674] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
[ 83.844919] iwlwifi 0000:02:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001
[ 83.847190] iwlwifi 0000:02:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000
Any ideas?
Edit: changed thread title
Last edited by Minsc (2014-06-19 01:06:15)

d41f3a76dbc185paulinchenk wrote:
Not for me :-(
I have an Intel(R) Centrino(R) Advanced-N 6205 AGN and the only way get it connecting to my WPA2-AES network was downgrading to linux 3.5. But because I have optimus graphics, this means I can no longer use bumblebee, as it depends on 3.6.
Anyone got a hint for a workaround to get both working?
Thanks
Does the 11n_disable workaround work for you?
Just upgraded to 3.6.5, I still have the problem on Centrino Wireless 100 N, with some differences: now it seems to authenticate but with very low speeds and the connection isn't stable. I haven't found out much more, I'll try to get more information during the week. Right now I still use the 11n disabled.
Last edited by pulce (2012-11-04 18:06:38)

X41 wireless adapter not found

I have just reinstalled XP on my x41 version 2525-65g using a version of XP professional I happened to have.
I thought that I had re-installed all the drivers but I keep getting the message "No supported wifi adapters in the system in the system". I have installed Intel PROset/wireless utility which used to work before the reinstall.
I am also having trouble getting bluetooth going as well.
I have various drivers with yellow question marks in device manager.
Can anyone tell me what to try next?
Solved!
Go to Solution.

Please first of all identify the unkown wireless device as described here to verify, that the "factory-default" wireless lan-card is built in.
Next step will be to uninstall all wrong WiFi-drivers if installed (Controlpanel - Add or remove Software).
The WiFi driver for the Intel of your X41 is this one:
- Intel PRO/Wireless 2200bg, 2915abg, 3945bg, 3945abg, 4965ag, 4965agn Mini PCI adapter.
(view the readme in the ZIP-file with Wordpad)
Sometimes users tune up their wireless by replacing it by an Atheros/Phillips WiFi-Card:
- ThinkPad 802.11abg, 802.11abgn, 802.11bg, and 802.11bgn Wireless LAN Mini PCI Adapter
or Cisco Wireless lan:
- ThinkPad Dual-Band ab and 802.11abg wireless LAN Mini PCI adapter
Please read the installation instructions on the concerning download-page.
Have success.
P.S.:
I use a german user-profile in this forum. So the english word "Subject" will be translated to the german "Betreff"
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Wireless adapter Z-Com XG-703A doesn't work with WPA after reboot

Hello everybody,
Arch doesn't load kernel module arc4 during boot with usb wireless adapter Z-Com XG-703A. So WPA doesn't work and It can connect to only opened access points.
I found two work arounds but I don't know how to fix the issue completely.
1. Remove usb adapter and plug it in again (it causes arc4 module to load), then restart networking.
2. rmmod p54usb, rmmod p54common, modprobe arc4, modprobe p54usb and after that restart networking.
Could anybody help to fix the problem generally?
$ lsusb
0cde:0008 Z-Com XG-703A 802.11g Wireless Adapter [Intersil ISL3887]
$ uname -a
Linux arch 3.1.9-2-ARCH #1 SMP PREEMPT Sat Jan 14 08:11:41 UTC 2012 i686 Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz GenuineIntel GNU/Linux
Stas

Does the p54common get loaded again as well when you do modprobep54usb?
If not, you might just put that into modprobe.conf blacklist.
If it does get loaded as well, there might be another wireless module getting loaded that perhaps does cause problems. You can check that with
mkinitcpio -v
now, or with lsmod after a reboot before your workaround.

Aironet cb21ag vs intel 3945abg

I purchased a Cisco Aironet CB21AG PC-Card because it comes with a decent site survey tool to determine signal strengths, etc. I also thought it was supposed to be a really decent card.
I'm using it in a laptop that has a built in Intel Pro 3945ABG wireless card, and it seems like the Intel Pro 3945ABG card is always showing a stronger signal to the network than the Cisco card.
How reliable is the Signal Stength value that shows up on the wireless icon in the taskbar. For example, the laptop is stationary, not moving, etc. and the signal strength of the Cisco card is showing LOW, yet the signal strength of the Intel card is showing VERY GOOD.
At these readings, the Cisco site survey tool is showing the signal strength at -77dBm and SNR at about 18-20dBm with the link speed set at 24Mpbs. I do not know the exact signal stength readings of the Intel 3945 card because Cisco's tool doesn't report on that card, just on the Cisco card. So I have to base my opinions off the icon in the taskbar that shows signal strength at VERY GOOD.
So I guess I'm looking for input here as to whether the Intel card is possibly more sensitive and can achieve a better connection than the Cisco card, or whether it's more likely that the reported numbers on the Cisco card or just more accurate...
Any thoughts?
JR

Just a quick followup.
For example.
On my laptop with the built in 3945abg card, and a Cisco Cb21AG PC card installed, when both devices are communicating with the same WLAN, the Cisco card is showing a -77dBm signal strength (+/-1 dbM varies) according to the Cisco Aironet Site Survey Tool while the Intel 3945ABG card is showing a -66dBm signal strength (+/-1dBm varies) according to the Intel ProSet Tools.
Same AP, same laptop, just different wireless devices... reporting a 10-11dBm difference between them.

WLC 5508 : WPA2 enabled SSID - especially Intel & Dell wireless cards are not getting connected

Hi ,
I have one pecular issue in my wireless lan set-up. I have some laptop users who are using below inbuilt wireless adapter/cards :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
1 ) Dell wireless 1397 WLAN Minicard
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
2 ) Intel Centrino Advanced N6200 AGN
above card are having issue with WPA2 enabled ssid connecitivity. strange is , the same users are getting connected to other wep enabled SSID but its not working for WPA2 SSID.
I have external ACS server which is used for radius authentication. Last time I had put same query in support forum did some workaround.
eq. disabling DHCP proxy option in WLC and moving all DHCP scope in external server.
After doing this workaround this mentioned users are still facing issue. I gone through some cisco document and some forums and came across that there is something to be done in " Session Timed Out " optionin WLC
which is default 1800 sec based on that I tried to capture debug outputs for mentioned above problematic clients and user who is working fine .
I gone through the same debug output and observed :
User who is working fine :
Processing Access-Accept for mobile 00:22:5f:8d:55:84
00:xx:xx:xx:xx:xx Setting re-auth timeout to 1800 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:8d:55:84 setting dot1x reauth timeout = 1800
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:8d:55:84 (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:1f:ca:2c:f3:01 to PMKID cache for station 00:22:5f:8d:55:84
New PMKID: (16)
The User / card which is having issue :
Processing Access-Accept for mobile 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Setting re-auth timeout to 0 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:90:a2:ac setting dot1x reauth timeout = 0
00:xx:xx:xx:xx:xx Stopping reauth timeout for 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:90:a2:ac (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:26:cb:1d:fe:31 to PMKID cache for station 00:22:5f:90:a2:ac
New PMKID: (16)
Please suggest me to do workaround.

Hi,
According to output of working as well as not working wireless cards ,
below is my observations :
Not working wireless cards observation :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client passed the L2 authentication and that, after successful association, it is now going into the DHCP_REQD state
Not-working wirelss card :
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 Stopping retransmission timer for mobile 0c:60:76:3e:8c:49
*Apr 06 11:58:15.869: 0c:60:76:3e:8c:49 10.10.232.137 Added NPU entry of type 1, dtlFlags 0x0
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.137 but after that , I am getting below output
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:ea:e0
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy WLAN LOCP EssIndex:2 aid:50 ssid:USTRI_SECURE
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Username LOCP :   U25744
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy IP LOCP: 0xa0ae889
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy CCX LOCP 4
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy MobilityData LOCP status:1, anchorip:0x0
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) State Update from Mobility-Complete to Mobility-Incomplete
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 Clearing Address 10.10.232.137 on mobile
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Change state to DHCP_REQD (7) last state RUN (20)
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMmProcessDeleteMobile (apf_mm.c:522) Expiring Mobile!
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMsExpireMobileStation (apf_ms.c:4427) Changing state for mobile 0c:60:76:3e:8c:49 on AP 00:1f:ca:2c:ea:e0 from Associated to Disassociated.
working cards ouput :
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 10.10.232.190 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 Stopping retransmission timer for mobile 00:22:5f:8d:55:84
*Apr 06 12:16:28.042: 00:22:5f:8d:55:84 10.10.232.190 Added NPU entry of type 1, dtlFlags 0x0
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.190 and as expected , I am getting below output
*Apr 06 12:16:28.749: 00:22:5f:8d:55:84 DHCP received op BOOTREQUEST (1) (len 321, port 29, encap 0xec03)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP processing DHCP REQUEST (3)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   xid: 0x6eefbbb8 (1861204920), secs: 0, flags: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   chaddr: 00:22:5f:8d:55:84
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   ciaddr: 10.10.232.190, yiaddr: 0.0.0.0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   siaddr: 0.0.0.0, giaddr: 0.0.0.0
*Apr 06 12:16:28.753: 00:22:5f:8d:55:84 DHCP successfully bridged packet to DS
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:f3:0
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy WLAN LOCP EssIndex:2 aid:10 ssid:USTRI_SECURE
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy Username LOCP : USTR\U17967
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy IP LOCP: 0xa0ae8be
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy CCX LOCP 4
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy MobilityData LOCP status:1, anchorip:0x0
Finally client is getting stuck with DHCP-REQD state ..................
Please look into this and put light on this ............

Disabling Wireless Adapter

I want to run a Powershell Startup Script to disable the Wireless adapters on some systems. I thought I'd want to get some WMI stuff
Get-WmiObject -Class Win32_NetworkAdapter -Filter "Name = 'Intel(R) Centrino(R) Advanced-N 6205'
Then run netsh to disable it
netsh interface set interface "Wireless Network Connection" DISABLED
After looking at this I wondered why not just run the
netsh interface set interface "Wireless Network Connection" DISABLED
I don't really need the Get-WmiObject do I?
Orange County District Attorney

Here are a couple of scripts ( ps and vbscript ) that can be used on a dell bios.. You could adapt it to disable the wireless adapter in the bios if you want ..
( pcombobox app is on www.justcode.ca )
Powershell ( may require dell client management agent )
(gwmi DCIM_BIOSService -namespace root\dcim\sysman).SetBIOSAttributes($null,$null,"Wake On LAN","4")
Possible values are:
1 - Disable
2 - Add-in
3 - On board
4 - LAN
5 - PXE boot enable
6 - LAN or WLAN
7 - WLAN only
vbscript
' Set Dell Bios items
' Requires that the Dell Client Management software is installed
'Dell DCIM values
' Wake on LAN values
'Enables or Disables Multiple CPU Core support on next boot.
'Possible values are:
'1 = Other
'2 = Unsupported
'3 = Enabled
'4 = Disabled
'The actual values are not the above, but the below - Paul Jorgensen - Nov 2011 ( Dell gx760 )
'1 = Disabled
'2 = Enabled
'AC Power Recovery Mode
'1 = ?
'2 = ?
'Processor Logical Processor(HyperThreading)
'1 = ?
'2 = ?
Option Explicit
'*** Declare variables
Dim strNameSpace
Dim strComputerName
Dim strClassName
Dim strKeyValue
Dim objWMIService
Dim ColSystem
Dim objInstance
Dim oInParams
Dim returnValue
Dim strAttributeName(2)
Dim strAttributeValue(2)
Dim strAuthorizationToken
Dim psDellBios
Dim WshShell, objWshScriptExec
Dim psAttribute
Dim psValue
Dim pbAttributeFound
Set WshShell = WScript.CreateObject("WScript.Shell")
'*** Check that the right executable was used to run the script
'*** and that all parameters were passed
If (LCase(Right(WScript.FullName, 11)) = "wscript.exe" ) Or _
(WScript.Arguments.Count < 1) Then
Call Usage()
WScript.Quit
End If
'*** request combobox input as to which bios setting should be updated
psDellBios = GetComboInput("pcombobox.exe /p:WakeOnLAN,EnableDualCPU")
WScript.Echo("This is setting ->" & psDellBios)
'*** Initialize variables
strNameSpace = "root\dcim\sysman"
strComputerName = WScript.Arguments(0)
strClassName = "DCIM_BIOSEnumeration"
'*** Set Variables based on combobox selection
If psDellBios = "WakeOnLAN" Then
psAttribute = "Wake On LAN"
psValue = "4"
End If
If psDellBios = "EnableDualCPU" Then
psAttribute = "Multiple CPU Cores"
psValue = "1" ' see value notes at top of script
End If
'*** Retrieve the instance of DCIM_BIOSEnumeration class for the TPM
Set objInstance = GetObject("WinMgmts:{impersonationLevel=impersonate," &_
"AuthenticationLevel=pktprivacy}\\" & strComputerName & "\" &_
strNameSpace)
'*** print out attribute if found
Set ColSystem = objInstance.execquery("Select * from " & strClassName)
For Each objInstance In ColSystem
'*** Check every instance
'iTKVal = objInstance.Properties_.Item("CurrentValue").Value(0)
'*** Auto On Hour and Auto On Minutes don't have PossibleValues and PossibleValuesDescription properties
If (objInstance.AttributeName = psAttribute) Then
WScript.Echo("Specified Attribute found " & objInstance.AttributeName & ", " & ( objInstance.CurrentValue(0) ) & VbCrLf )
pbAttributeFound = True
End If
Next
strClassName = "DCIM_BIOSService"
strAttributeName(0) = psAttribute ' Wake on LAn or Multi Core CPU, see psAttribute in query section above
WScript.Echo("strAttributeName-> " & strAttributeName(0))
strAttributeValue(0) = psValue
WScript.Echo("strValue-> " & strAttributeValue(0))
strAuthorizationToken = ""
'*** Retrieve the instance of DCIM_BIOSService class
Set objWMIService = GetObject("WinMgmts:{impersonationLevel=impersonate," &_
"AuthenticationLevel=pktprivacy}\\" & strComputerName & "\" &_
strNameSpace )
Set ColSystem=objWMIService.execquery ("Select * from " & strClassName)
For Each objInstance In ColSystem
Set oInParams = objInstance.Methods_("SetBIOSAttributes").InParameters.SpawnInstance_
oInParams.AttributeName = strAttributeName
oInParams.AttributeValue = strAttributeValue
oInParams.AuthorizationToken = strAuthorizationToken
Set returnValue = objInstance.ExecMethod_("SetBIOSAttributes", oInParams)
Exit For
Next
'End If
'*** If any errors occurred, let the user know
If Err.Number <> 0 Then
WScript.Echo "Enabling Wake On LAN failed."
End If
'*** Sub used to display the correct usage of the script
Sub Usage()
Dim strMessage
strMessage = "incorrect syntax. You should run: " & vbCRLF & _
"cscript.exe /nologo SampleWakeOnLAN.vbs <systemname>"
WScript.Echo strMessage
End Sub
Function GetComboInput(cbparam)
Dim sTempPath, sTempResult, sTempExitCode
sTempPath = cbparam
WScript.Echo sTempPath
Err.Clear
'WshShell.run sTempPath, WINDOWNORMAL, True
Set objWshScriptExec = WshShell.Exec(sTempPath)
' ***** BELOW - ** USE RegRead to read reg return value **** !!!!
'wscript.Echo WshShell.RegRead(testregpath)
'WScript.Echo Err.Number
Do While objWshScriptExec.Status = 0
WScript.Sleep 100
'WScript.Echo "this is the status code" & objWshScriptExec.Status
Loop
'**** if item was not picked from combobox, take action based on errorlevel
sTempExitCode = objWshScriptExec.ExitCode
If (objWshScriptExec.ExitCode = 0 Or objWshScriptExec.ExitCode = 100 Or objWshScriptExec.ExitCode = 102 Or objWshScriptExec.ExitCode = 101) Then
'If(objWshScriptExec.ExitCode > 20 )Then
Select Case sTempExitCode
Case 0
WScript.Echo "User clicked cancel"
WScript.Quit(0)
Exit Function
Case 100
WScript.Echo "User clicked return abort"
WScript.Quit(100)
Exit Function
Case 101
WScript.Echo "User clicked ok with NULL item"
WScript.Quit(101)
Exit Function
Case 102
WScript.Echo "User clicked ok with data entry"
'WScript.Echo " result is " &
GetComboInput = WshShell.RegRead("HKCU\Software\Green-Frog-Software\pComboBox\RData\PComboBox")
WScript.Echo " GetComboInput is " & GetComboInput
Exit Function
Case Else
End Select
End If
'WScript.Echo objWshScriptExec.ExitCode
'**** return the error value
'*****ACTUALLY - parse "cbparam" using the exitcode to return the
'***** the string required rather then run another function
'***** or run a generic function from here...
'***** this will make the function single line usage
'***** which is way more script friendly
sTempResult = pfParseResult(cbparam, objWshScriptExec.ExitCode)
'WScript.Echo sTempResult
GetComboInput = sTempResult
End Function
' ** Application: VB MapDrives
' ** Function: pfParseResult
' ** Purpose: match the errorlevel returned to the input string desired
' ** Update:
' ** Date: Jan 6 2009
' ** Author: Paul Jorgensen
Function pfParseResult(cbparam, pi_Result)
Dim sTempPath, sSplitFirst, piLen
Dim paParseArray
sTempPath = cbparam
'WScript.Echo sTempPath
Err.Clear
piLen = Len(cbparam)
If (piLen > 17) Then
sSplitFirst = Right(cbparam, piLen - 17) ' 17 = 3 for /p: and 14 for pcombobox.exe with spaces
End If
'WScript.Echo "this is sSplitFirst" & sSplitFirst
paParseArray = Split(sSplitFirst, ",", -1, 0) ' string, delimiter, count -1 = all, binary(0) or text (1)
'WScript.echo CrLf
'WScript.echo paParseArray(0)
'WScript.echo CrLf
'WScript.echo paParseArray(1)
' ie a valid selection was returned from GetComboInput, so use the return code ( pi_Result) which represents the item
' selected to select the item from the paParseArray which is the cbparam parameter minus the exe and the /p: with
' the /p: parameters split into the paParseArray ( ie D,L,R,S,V.... )
pfParseResult = paParseArray(pi_Result - 1)
'Do While objWshScriptExec.Status =0
'WScript.Sleep 100
'WScript.Echo "this is the status code" & objWshScriptExec.Status
'Loop
End Function
just code, no beer...although that would probably help..

My wireless adapter not detecting the Network

I have a Lenovo 3000 Y100 Laptop. My Wireless network adapter is Intel PRO Wireless 2200B/G. I dont know why but it is not detcting the wireless network in my office network. Do i need some more driver or patch to apply.
Premanand

tiki_icwai, Welcome to the forum.
Try the link below to find solutions to the Intel Pro Wireless 2200b/g adapter connection problems.
http://www.intel.com/support/wireless/wlan/sb/CS-025332.htm
Hope this would help you.

No Wireless adapter

I just bought All-In-One ThinkCentre Edge (Free DOS)
System SN: xxxxx
System Brand ID: ThinkCentre Edge 62z
Machine Type and Model: 2117FMG
I loaded Windows 7 Pro, I downloaded all driver on support.lenovo.com
the wifi is not working, it shows no driver install
I checked Device Manager, no wireless adapter display only LAN
I just purchase this PC 3 days
*** NOTE : i bought the AIO purposely for the wireless reason.
Kindly help out
Moderator comment: Serial number(s) removed to protect member from mischief.

Thanks for your prompt response.
This is the specification sent to me from the distributor before making the
purchase
RF5FMUM
Edge 62z AIO Non-touch Intel® Pentium Dual Core Processor G2030 (3M
Cache, 3.00 GHz) G2030 2GB 2.5"/500G/5400/SATA Slim Rambo No OS Wifi
1 Year On-Site
The only different with what they supplied is the RAM
from the download driver window i got: http://support.lenovo.com/ng/en/products/desktops-and-all-in-ones/thinkcentre-edge-desktops/thinkcentre-edge-62z/downloads/DS031469
This packages install Intel PROSet/Wireless WiFi that applies to the
following Lenovo systems
Supported systems
- Think Centre Edge 62z (type 2117, 2118)
Supported Operating Systems
- Microsoft Windows 7 (64-bit)

Intel 3945ABG wireless adapter

Similar Messages

Maybe you are looking for