Intel 82845 problems

im having problems with my gfx card, whenever i try to switch to 1280x1024 resolution, it restarts X after about 15 seconds. i figured maybe it was my gfx drivers, and this is what happens when i try to load them manually:
[root@Darkstar ~]# modprobe i915
WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be ignored in a future release.
WARNING: Error inserting i2c_core (/lib/modules/2.6.31-ARCH/kernel/drivers/i2c/i2c-core.ko): No such device
WARNING: Error inserting i2c_algo_bit (/lib/modules/2.6.31-ARCH/kernel/drivers/i2c/algos/i2c-algo-bit.ko): No such device
WARNING: Error inserting agpgart (/lib/modules/2.6.31-ARCH/kernel/drivers/char/agp/agpgart.ko): No such device
WARNING: Error inserting drm (/lib/modules/2.6.31-ARCH/updates/drm.ko): No such device
WARNING: Error inserting drm_kms_helper (/lib/modules/2.6.31-ARCH/updates/drm_kms_helper.ko): No such device
FATAL: Error inserting i915 (/lib/modules/2.6.31-ARCH/kernel/drivers/gpu/drm/i915/i915.ko): No such device
any ideas why it wont let me load i915?

yeah, and agpgart. still the same results. the problem is, i dont think i915 is the right driver. correct me if im wrong, but shouldn't my card be using the i810 driver? i915 is the driver that X autoselects, and i believe it falls back to vesa, but not sure. here is my ~/.xsession-error file, in case it has any hints.
[root@DARKSTAR ~]# cat /home/nick/.xsession-errors
/etc/gdm/Xsession: Beginning session setup...
/etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
GNOME_KEYRING_SOCKET=/tmp/keyring-t0GPQA/socket
SSH_AUTH_SOCK=/tmp/keyring-t0GPQA/socket.ssh
(gnome-settings-daemon:2545): GLib-GObject-CRITICAL **: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
(gnome-settings-daemon:2545): GLib-GObject-CRITICAL **: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Window manager warning: Failed to read saved session file /home/nick/.config/metacity/sessions/1057999753958dcc371260238729410000000025180014.ms: Failed to open file '/home/nick/.config/metacity/sessions/1057999753958dcc371260238729410000000025180014.ms': No such file or directory
(polkit-gnome-authentication-agent-1:2583): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:2583): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
** Message: Initializing gksu extension...
database table: ubiquity_suggestion_memory already exists
Window manager warning: Fatal IO error 11 (Resource temporarily unavailable) on display ':0.0'.
gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
nautilus: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
polkit-gnome-authentication-agent-1: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
gnome-screensaver: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
gdu-notification-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
gnome-power-manager: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
gnome-panel: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
firefox: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.

Similar Messages

Solaris 2.8 on Intel Installation Problem

When attempting to install Solaris on Intel 2.8, everythin g goes fine and the files are copied, but it fails at the end with the following message:
Customizing system files
- Mount Point table (etc/vfstab)
- Network host address (etc/hosts)
Error: Could not copy file (tmp/root/etc/openwin/etc/devdata/SUNWaccel/monitors/pnp/edidgen.vda) to
(/a/etc/openwin/etc/devdata/SUNWaccel/monitors/pnp/edidgen.vda)
Error: Unable to copy a temporary file to it's final location
I have tried this time and time again, should I disable PNP in my Bios or what could be the cause of my problems?
Thanks in advance

Looks like the failure that you are having is when the install program is trying to copy the PNP moniter spec from the /tmp location to the /etc location. May be for some reason the edidgen.vda never got created in the first place.
Can you please mention the version of Solaris 8 you are installing and if you have a plug and play monitor.
Regards
Angelo
Sun Developer Support

MSI x48c PLatinum and Intel E8600 Problem

Hello, I'm from Greece
My computer Setup is:
Mobo: MSI X48C Platinum (bios version 7.0)
CPU: INTEL CORE 2 DUO E8600
PSU: HEROLCHI 525 Watt
RAM: OCZ OCZ3SOE10664GK DDR3 4GB (2x2GB)
VGA: Albatron 8800 GTS
HDD: WD 300GB SATA
The problem is:
I bought them yesterday because i want to upgrade my system.
I connect them all properly in my case and after i turn the PC on it freeze in the MSI logo screen and cant even enter BIOS Setup.
The first time i turned the power on a message like: "Your previous overclockinn atempt was not succssefull. Press a button except del to load defaults and continue." i do what it said and freeze after that message.
This just the first time, the other times it just freeze on the logo screen. Some times it beeps one time and reset by his own and sometimes beeps four times and then reset. The most of the times it just freezes in the logo screen.
I took everything off and reinstall them. Nothing Happen.
I tried with one dimm of RAM each time in deferent positions. Nothing Happen.
I did o clear CMOS from the back button. Nothing Happen.
I perform a clear CMOS with the old method (unplug power, remove battery, wait for a couple o minutes). Nothing Happens.
I believe the problem is with the bios version i have and the CPU compatibility. I look at www.msi.com.tw and it said that this board its compatible with the INTEL E8600 but only at the 7.2 version.
How will i update my bios if my computer doesnt even enter bios setup?
Please help me. any suggestion. I'm losing my mind here!
Thanks you in advance.

Quote from: triangle on 28-August-08, 17:00:43
the only thing i can suggest is to drop in a 7.0 compatible CPU (if you can) and flash the BIOS to 7.2 that way then switch back in your new CPU. A painful process, I know ... Alternatively, if your retailer is friendly they might set it up on a test bench for you and flash it.
Andrew
Like Andrew mentioned, this is the only way out though it is a long painful process.
The other is to get a board that is compatible to the E8600 right out of the box.

REMOVE: Multipler + Intel EIST problem on P35 NEO.

Allright you probaply are familiar with this problem.
When Im trying to change multipler on my motherboard settings it says that Speed Step haves to be disabled.
I have latest BIOS on my motherboard and in case of somebody suspecting OC albility of MSI p35 Neo; I had hit it to 400 FSB and it run without problems.
My system is;
Intel e6750 2.6 Ghz + Zalman cnps9700
Kingston Valueram 667 Mhz
Well rest of thing you dont probaply need to know.

I don't think I really understood what your problem is...
Can you try to explain it a little more in detail and tell us with what you need help or advice?

Does the Intel have problems with flip4mac?

Hi, I have a new intel Core 2 duo iMac and there are two websites that I cannot view flip4mac plugsin on but I can on all other websites. My powerpc eMac can view the websites (videos) that I can't view on my iMac and both of my computers have the exact same system software, Safari versions, Firefox versions, and they both have flip4mac version 2.2.0.49. The only difference is one computer is a powerpc and the other one is an intel.
Apple has not been able to help me. Does anyone else have this problem with their intel iMacs?
Thank you!
Martha

The reason I didn't put the links is because on both sites, you have to put in your email address to register. Anyway...
Try this website out:
http://www.crenshawchristiancenter.net/ecomm/index.php?option=com_content&task=v iew&id=2&Itemid=4
Put your mouse on "Media", go to "Ever Increasing Faith" and a new window will launch, then click on "archives." None of the archives or any links in that new wndow will work on my iMac.
The other website is:
www.godslearningchannel.com
You don't click on anything on the left side, you go down to below where it says:
"The GLC bookstore is proudly carrying V!BE. Click here for more information."
Go below that and you will see a moving box and you click on THAT. It will then ask for a faith pass, you put in an email address and then you can see the video link that is not working for me.
God's learning channel will NEVER send you anything even though you "joined".
I eagerly wait to see if you can view either videos.
Thanks,
Martha

[kinda SOLVED]video-intel KMS problems

Hello everyone.
I did a fresh install and I'd really appreciate some help setting up KMS properly.
So far I'm able to run gnome-shell with all the effects,
but:
1. I only get 1024x768 resolution instead of my native: 1920x1080.
2. console is limited to small area when booting up (even though I did as the wiki suggests)
3. I followed the wiki:(https://wiki.archlinux.org/index.php/Intel) step by step, several times
but nothing I do seems to have any effect!
At last, I decided to stop rebooting and ask for help.
please help me troubleshoot this!
thank you for your time!
p.s.1 here's a similar topic I found
though in my case I don't get weird artifacts
p.s.2. my graphics card is the one built in core i5.
[edit] I just fixed the resolution problem: for some unknown reason, gnome did not have my monitor selected by default
instead it defaulted to an "unknown device" which only supports 800χ600 and 1024χ1768. Weird.
Last edited by twin (2011-11-25 17:28:21)

Are you using a laptop or desktop?
Cause I had a similar problem with a nettop with an Intel Atom procesor; the fix for me was to disable the LVDS in grub to get working my native resolution.

Migrating from 1.25Ghz G4 to Intel iMac problem

Hi there!
Question in brief:
Can I install old (non-universal) software (such as IDCS2 and Qk6.5) on a new Intel iMac?
Question at length:
Just got a new iMac here, and wanteed to do a migration (which I've done problem-free between PCC Macs) and have hit upon a problem. The new iMac will not see the old Mac (connections/cables/old mac have been tested). New man just says "Waiting for your old mac to restart"
I came here looking for an answer, and fount this post
http://discussions.apple.com/thread.jspa?messageID=4753948&#4753948
So it looks like it's going to be a LONG job. Can I just reinstall non-universal 3rd party apps from original CDs? We have NO universal software at all.
Thanks for your help.

Hi Kappy
Thanks for your reply. Sorry for not being clear enough – ou see I'm not exactly sure of what migration assistant is capable of.
I know that when you connect the two macs MA Upon start up (Migration Assistant) can copy the user settings. I presumed it could do this because it was copying over the newer mac's user settings at a point where the newer mac a total access to the drive. I therefore presumed that if (instead) the iMac had been started up, and then I ran MA, it would not be able to replace the user data, because it is in use.
That link I put in the original post said that I shouldn't do applications via MA from a PPC to an Intel one. So I'll have to reinstall those from the original disks. That's O.K., right?
Thanks again ;0)
Macfool

P45 Q6600 Intel EIST problem

Hi All,
I have a Q6600 on a P45 neo3.
The cpu is overclocked by increasing the FSB Frequency.
I would work with a greater FSB using a lower multiplier (x8), so disabling Intel EIST.
The problem is that I run linux and disabling Intel EIST result in an unknown CPU and the cpu scaling doesn't work at all.
Has anyone the same problem ?

Uhm,
I'm not sure that's the right way !
I can run my q6600 at 3ghz (333 x 9) with linux (I don't use windows, I have installed it only for benchmark ) and my cpu is recognized and it's scaled fine. If I disable EIST the cpu isn't recognised and it's not scaled.
It seems that EIST is important

Ipw2200 intel wireless problem

Okay i got everything working pretty well with netcfg and ipw2200 drive ecept one thing. If there is not network activity on the wireless card then it goes to sleep. Then once i go to google.com it takes forever ot load up because the card has to start up again. The hole time it stays connected but it seems like the card goes to sleep. Has anyone else had this problem before?

Have the same card
02:06.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
and runs perfectly here, never had any problem with linux. I also use netcfg2 ... Do you have some kind of powersaving enabled? What does
iwconfig
show?

Solaris8 intel keyboard problem

I have been unable to make one key ("| \" on english keyboard or "<>" on spanish keyboard) work on either of my machines. The installation worked fine on both boxes but much to my surprise, neither of them have that key working. Incidentaly one box is a Pentium 4 PC and the other is an IBM laptop. I am using solaris 8 intel version 10/01.
After finding out, I ran the DCA on both machines and the key seems dead. Although using the DCA from the solaris 7 version the key seems to work. A Solaris 7 installation works fine.
Has anybody heard of this problem before.

Should be sufficient to apply the latest patch cluster to the 10/01 Solaris 8 installation. This way you save $20!
Running kdmconfig afterwards might be necessary, too.
I've never had a problem with my German keyborad BTW, not in Solaris 7 (FCS) and not in 8 (01/01 with latest patch cluster).

Z60T + INTEL SSD problem!

Hi,
I want to chance the old HAD from a Z60T to a Intel SSD.
Notebook type: 2511-EJG
SSD Model: SSDSA2M160G2GC
I had cloned the dates from the old HDD with Acronis True Image Home 2010 to the Intel SSD.
But after installing the SSD into the laptop the OS do not boot. I had contacted the lenovo telephone support but they can't help me to find the reason.
After checking some theadsof this forum I have the idée it can bee a problem with the SATA1/ SATA2 respectively 1.5 Gb/sec / 3 Gb/sec media transfer rat compatibility.
Is that the problem? And how can I fix it?
Tanks and sorry for my bad English skills. I hope you still understand me.

admindrey, welcome to the forum,
please try cloning again, but this time with the SSD inserted in the primary hdd slot in your Z60. The original drive in an usb external enclosure and boot from an Acronis rescue cd you can create with Acronis.
Let us know how you get on.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Imac intel browser problem

I am using a iMac intel 2Ghz core duo, on 10.6.8, it is about 8 years old, and very recently I have been experiencing a problem with Safari, when I try to open a webpage the progress bar will start to move the it will lock up, if I do a reboot, it will rectify the problem temporarily, but then the problem returns, I have turned off the IPV6, all to no avail.
I am using the new BT Hub 4, and it does not appear to be a router problem, as everything else is working fine, i.e. two ipads, and a Macbook Pro.
Maybe the old lass is getting a bit old.
Any Ideas
Many Thanks.

Have you tried emptying the cache or resetting Safari? In the Menu bar go to Safari >> Reset Safari. This will give you numerous options of browser items you can reset. On a more lighter note you can try emptying the cache which is Safari >> Empty Cache. This will clear files that Safari stores to help previous webpages load faster.

Intel AMT problem

Recently, I updated the AMT to 4.2 on my t400. This new release seems not compatible with Win7. It appears that everytime I start the laptop the Intel AMT icon does not pop up until 2~3 minutes later. It seriously slows down the startup. Everytime I have to wait for the AMT icon to show up before running any programs. When I open the Intel Management and Security Status, it shows the TPM is active and enabled, but unowned.
How do I solve this problem? ( I have flashed the bios to the latest version. But it doesn't work)

Looking into the XML file I found the name of the .inf file used...
Searched them and found them in :
C:\Windows\System32\DriverStore\FileRepository\heci.inf_amd64_6282584de27de808
C:\Windows\System32\DriverStore\FileRepository\mesrl.inf_amd64_2ea3e14df74fac30
Solved.

Solaris 8 (Intel) Installation problems

I have not been successful to install Solaris 8 (Intel version).I am
installing from the (Install CD) and I get to the Solaris Boot screen that
says:
Select one of the identified devices to boot the Solaris Kernel and
choose F2 to continue. Solaris identifies 2 IDE Disk Drives (on Primary Controller),
a third IDE HDD (Secondary master) and the CD ROM as a slave on the Secondary
Controller. When I choose the CD ROM as the Boot disk, the system hangs
forever!. Any suggestions?
P.S: The installation CD contains the following:
image = 550MB
(.VOLUME) : 47 bytes
ADD_INSTALL_CLIENT: 54.5KB
BOOT: 0 bytes
COPYRIGHT: 5.3KB
MODIFY_INSTALL_SERVER = 3.37KB
The total of these files is : 93KB
Dose this seem correct, having in mind that the image file is 550MB
Thanks,
Kamel Elchazli

At the "(b)oot or (i)nterpreter" prompt, type:
b kadb -v
This loads the Solaris kernel under kernel debugger (kadb) control.
Apparently your system crashes with a kernel panic, and when kadb
is loaded, kadb will catch the kernel panic error and drop you into the
debugger so that you can read the panic messages.
The "-v" option enables verbose kernel messages, which might be
useful to diagnose the problem.

Solaris 8 Intel install problems

I'm a noob to this, I try to install the Solaris 8 Intel on AMD XP as second os (XP Pro 1st os) but failed. I get this error message:
error: Configuration error - missing controller?
The root file system is not mounted and the configuration assistant has exited prematurely.
Booting is unlikely to succeed. CTRL-ALT-DEL may be used to reset the machine.
Failover to boot interpreter - type ctrl-d to resume boot
>
I tried ctrl-d it didnt work like it said and give these error message:
Cannot load drivers for
(can't load the root filesystem)
Please help, thank you

Did you get any help with these problems? I am worried now beacuse my install files are nothing like these sizes. I unzipped a v1-a to 128 Kb.
Did you find some isntructions? Could you forward them to me because I cannot find any. Thank you.
Mike
Hello,
I'm trying to create the 3 iso files from the Solaris
8 Intel download and am having
a problem with the iso formed file sizes. Two of the
iso files, the "install.iso"
and "v1.iso" are larger than 700 meg. (which is the
limit on my CDs) They are
944 meg and 729 meg respectively.
The sun intructions say to create the iso files from
the zipped files I downloads after
unzipping them. Well, combining 3 files each into
each iso file for the CD image is
creating these large iso images.
Is this the right procedure?
Also, do I even need the install.iso image as I see a
lot of talk on the newsgroups
about starting a fresh Solaris 8 install with CD 1
("v1.iso")?
Thank you!
- Steve

Intel 82845 problems

Similar Messages

Maybe you are looking for