Intel 915pm sound card can not work

My notebook PC's sound card is onboard 915pm (ICH6M), Audio codec is ALC880. When I use hwd, it can not find the sound card. Then I use alsaconf, it find snd-hda-intel. After I " modprobe snd-hda-intel", xmms can work with mp3 file, but there is no sound output from my speaker.
Why ???

I have this sound card and I was able to get it to work with standard and archck kernels. But there are some bugs and sound sounds corrupted(it's fixed in 2.6.16). Compiling these modules in to the kernel helps a little. But you sould get it to work without any problems.

Similar Messages

I cannot get any sound..it says my sound card is not working properly...how do i fix this.

HP PC 2000 notebook, windows 7 operating system
can't get any sound..says the sound card is not working..how can i fix this...

You need to contact Adobe for you billing problem this is a user four not adobe customer support.
For your Photoshop Problems this user community may be helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

External usb sound card is not working correctly

When my computer usb sound card is working correctly. If your computer to sleep and wake up the sound card is working correctly. If you disable the sound card and connect again, it appears extraneous sound on the background music playing. Each time the sound is different. The sound is very similar to not match the sampling frequency. If the computer is rebooted, then the sound card is working properly again.
Soundcard Infra-sonic.com model Amon.
I have not experienced problems when using the same card with Mac OS 10.5.8 with the drivers for Mac OS 10.5
Manufacturer issued driver for Snow Leopard, but the card still does not work correctly.
Also such problems, other users complain about an external USB audio card. None of the users can not find a solution to this problem.

Contact Infra-Sonic tech support.

Intel pro wireless card can not connect

Since some weeks, i can not use my wireless network, it does not associate the access point.
The cared is a intel pro, using the agn driver.
I can not connect to my wep key protected home network, or public, unprotected accesspoints.
I tried various parameters with iwconfig, without success, so I assume the kernel module is broken.
Any help would be appreciated.

B wrote:
sredna wrote:Yes, I read the wiki page. Yes, everything is installed. It worked for a long time. I read the various manuals. I do it the correct, recomended way. It just does not work.
Rather than blaming devs for putting out faulty software, if I were you I'd look at myself - the PEBKAC problem . So an upgrade broke it. When was this? What packages where upgraded? Check your pacman log (yes, it exists).
You are aware the module name for Intel's wireless cards changed? Instead of referring to the card model it's now iwlcore and iwlagn. But then again, if you let udev figure it out, there shouldn't be the slightest problem in that upgrade.
Care to share any of your cherished errors? Without them there's not much we can do. The BBS has been out of crystal bowls for a long time.
Dear mr. B, I do not blame anybody anything. I report, as is, it does not work. On my system, in the hope that someone have something meaningful to say, not because I hoped for you to call me names. I do not know what your acronym means, and I do not wish to find out, since it appearently is there to make me less. I do not care for that.
The kernel modules that are loaded on my system, and was back when I had working wifi support, are iwlcore and iwlagn. I do not know that the iwlwifi-4965-ucode package is used for anything, I installed it because the before-mentioned wiki page recommends that, and I did get working support. I do not try to configure it by hand, I trust udev/hal/whatever is there to handle the hardware.
But, sorry for repeating, since some time, I can not connect to an access point. No matter if I try cli commands or use wicd or networkmanager applets. The result appears to be the same, there is no error from iwconfig, which does not succeed.
I can't even remember the date it went wrong, but i know that the kernel was updated as a part of that particular update. rolling back the kernel did not help though.

Automatic update to Tiger and now MBP sound card is not working properly?

A month ago there was an automatic Mac Book Pro OS update to the Tiger OS and since then the sound card on my MBP is popping and clicking during all music playback using the Sibelius music software program. All of my music composition friends (who use MBP and Apple computers) had the same experience at the same time...problems (popping and clicking) began right after a particular OS automatic update. Does anyone else have this problem or have a solution to this Sibelius music playback problem with a recent Mac OS automatic update?

Welcome to the forums!
Yes there are other posts here recently about noise along with some Audio APPs, there might even have been a cure, but I'm on Dial-up & just getting off work, but thought I could give you a hint about searching for it.

Hp Windows 8 - Sound Card is not working

I noticed that my music wasn't playing on itunes and it said that my soundcard was not working properly. When I troubleshoot the 'playing audio', it says that they could not identify the problem. I uninstalled and reinstalled the RealTek HD Audio Driver and still no luck. My computer did run an update before the poblem occured and i'm guessing that's why it happened.If anyone could help it would be greatly appreciated! Thank you!
It is an hp laptop, Windows 8 (I have not installed 8.1 yet)
The Product # - C2M44UA#ABA
Model # - 2000 - 2B29WM
Edit: It actually started working for a while and then stopped again the next time I opened my computer.

Bump

Playing back files at 96KHZ in Sonar with built-in sound card is not working

I just bought a dv6-2150us a few days ago for music recording. I tried opening a few files in Sonar that were recorded at 96KHZ and they won't play. Files recorded at 44.1KHZ are playing back fine...and at very low latency with the ASIO drivers.
Anyone have this kind of problem? I'm searching the Cakewalk forums, though I'm wondering if other audio recording programs (ie Cubase, Reaper, etc.) would have the same problem.

Please, someone help!

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Okay, I did my best searching and I couldn't find anything that matched all your descriptors. I did do a search on both decoder numbers. SB0256 returned very little results, but with SB0466, I was able to find this ebay listing:
http://cgi.ebay.com/ws/eBayISAPI.dll...6_fvi%3D&_rdc=
This card isn't a Champion like you suggested. And with my complete lack of knowledge, I don't know what I/O dri've bay means. But since it is PCI and the decoder matches the number you gave me, this card should be adequete, right?
Whether it works or not, my search indicated it might be very hard for me to find that card (or any PCI card for that matter). Everything I saw was out of stock. I know this is a forum for Creative, but are there any other manufacturers that will allow me to accomplish my goal, either with current cards, or discontinued cards? Thanks again
Oh, and I will vote on that thread. I probably won't wait for them to release the decoder since I need it now, but I still believe Creative should be giving the customer what they want

Network card: e1000g (Intel PRO/1000 MT) did not working properly

Hi to everyone!
I'm having some strange trouble.
All computers attached to one DLink gigabit switch
Server #1:
nf4-based motherboard, Intel PRO/1000 MT net card, onboard net card (forcedeth driver used) Ubuntu Linux 2.6.25 kernel version.
All just working.
Server #2:
nf6-based motherboard, same Intel net card, SunOS 5.11 snv_86.
All just working.
Server #3:
Same as server's #1 nf4-based motherboard. Same onboard card. Same SunOS 5.11 snv_86 as server #2 have installed.
Its work. BUT..
Intel card is not working as expected.
It is seen by system. It is properly up and running. It is sending packent and receiving packets. Ierrs=Oerrs=Collis=Queue=0.
But thru e1000g0 interface no one computer can reach this one, and from server #3 no one computer is seen thru e1000g0. Exept...
Except two old Sunray1 devices (attached to the same switch for testing purposes)! But even these devices seen only by arp requests, and is not pingable.
It is some mistery, but if I turn on jubmo frames, these rays got a picture from SRSS, testing on this sevrer! Not for long, heh, they hung up fast, but this is proof a physical connection :)
So, I can not disable onboard network card on Server #3 - server becoming unreachable :(
I know, those network cards must work on Solaris - as they did it on server #2. I know, those network cards work with my nf4-based motherboards - as they did it on server #1.
But I can't uderstand, whait is going on with e1000g driver on server #3!
P.S. Kernel driver e1000g settings are the same. All difference from servers #2 and #3 is: #2 had Intel netcard installed then Solaris was setting up, and #3 had Intel netcard installed later. All netcards are working (I trying to swap them from one computer to another - did not change anything).

*) #3 thinks it is sending, but a NIC/driver error prevents it.NIC is fully health. It is tested on another PC. Driver error - or driver's bad implementation - is the one I'm thinking.
*) #3 has a bad transmit pair of wires (would affect all communication)This patchcord works w/o problems on other PCs and even on onboard NIC of server #3.
*) Network problemsHeh :)
*) Firewall or other device is dropping the ARP repliesIt is some very stealthy and very selective firewall, affecting only external NICs :)
BTW, then cord is attached to NIC, it sends "who has this IP" requests, asking to be shure there will not be an IP conflict. No one seen this requests.
*) #1 has a NIC/driver error preventing it from seeing the reply.Only for send from #3? It is like a firewall on #3 :) And, there is more PCs, not only #1-#3. No one can see #3's replays (or asks), not only #1..
I'm repeating: this PC works in network now on onboard NIC w/o problems. But onboard NIC is only 100 Mb/s, and we need 1 Gb/s.
I was thinking, Solaris took wrong MAC for NICs - but not, ifconfig shows the same MACs as marked on NICs.
Even more, yesterday i plumbed e1000g1 - second Intel NIC in server #3. And I was surprised - it worked perfectly!
But I make "touch /reconfigure; init 6" - and after reboot, no one of two Intel NICs working again :( They both have the same behavior - no one can see packets they sends.)
I even try to restrict connection on 100 Mb/s by driver's .conf modify - it works, link become yellow instead of green (take a note, NIC is able to "speak" properly with switch!), but all other stay the same.
Strange, really strange behavior. More strange is a fact this NICs work on another instance of same SunOS, but on different motherboard, while the same MB with same NIC is working w/o problems under Ubuntu. Looks like some bug in Solaris driver.

Hi. Unfortunately my ethernet card was not working anymore. This is the message "This computer does not appear to have any PCI Ethernet card. How can I fix it?

Hi. Unfortunately my ethernet card was not working anymore. This is the message "This computer does not appear to have any PCI Ethernet card. How can I fix it?

i would try an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964
if it still gives that message, you need to take it to apple store or apple service provider to have a new card installed. the apple site gives listings of providers and stores in your area:
https://locate.apple.com

My iphone 4 of ios 7.1.1 sim card is not working, it always shows searching whenever i insert sim in it. What can i do? please help me.

My iphone 4 of ios 7.1.1 sim card has not working from since yesterday, it always shows searching whenever i insert sim in it, i do it again and again, but it cant be fix. What can i do? Please help me.

Get a new SIM from your carrier.

TS1574 optic digital port can't be shut off and the sound of speakers not working! what to do?

optic digital port can't be shut off and the sound of speakers not working! what to do?
this happened after taking out the head-phones. Now even after pressing CMD+ALT+P+R when booting - the sound of booting appeares BUT after the desktop is ready the sound doesn't work and sound buttons show the sign "circle with crossed line"

If there is a red light visible in the audio output port, the switch id stuck. Insert the earphone jack a few times. If that fails to trip the switch, try a toothpick or similar device and jiggle it inside the port. If that fails, try a shot or two of compressed air. If still no success, go to a repair facility.
Ciao.

HT201303 Hi this is Sai I was trying to change my card details because my old card is not working so I want to change the details . So can you help me out please

Hi this is Sai I was trying to change my card details because my old card is not working so I want to change the details . So can you help me out please ..
<Edited By Host>

These are user-to-user forums, you are notalking to Apple here - I've asked the hosts to remove your email address from post.
Are you not able to log into your account and change your account details e.g. via Store > View My Account on a computer's iTunes ?

Siri, sounds, video, alarm not working. Need help with backing up my iPad so I can do a factory reset....need help doing that also.

Siri,sounds,alarm, videos not working. How do I back up my iPad and how do I do a factory reset?

Try this:
Make sure IOS is updated to latest version
(How to update your iOS device
http://support.apple.com/kb/HT4623)
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).
If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766

Macbook Pro Retina - nVidia card does not work correctly

Hi,
having a MacBook Pro Retina. It ran fine till yeasterday when I fired up a game which was laggy and it was running fine before. It took me several hours to find where the problem is and it seems to me that the nVidia dicrete card is not working. But strangely not working. I installed gfxCardStatus to see whether the card is being switched to run the game and it actually is. But the performance is the same as running it on an internal Intel. I took another test and downloaded CINEBENCH to see the differences and sadly the results are the same if I switch to nVidia or to Intel and run the benchmark.
Obviously something is not right here. It happened over night. Before it worked corectly. I do not remember installing something that day/night that could have broken it (in case it is a SW problem). Only one thing comes to my mind - Apple Java update. But I tried to uninstall it and got the same result. I did try to restart several times. But otherwise there is no visible flaw, e.g. flickering or black screen when swithech do nVidia - nothing. gfxCardStatus shows that the system switches the card and I notice no change. Only in heavy load it is obvious that it is slow (slower than it was).
Is there a way to see if the nVidia card is working? I suspect that even if the system is trying to switch to a discreet card it still runs on the Intel in reality. Any way how to distinguish this rather than to rely on gfxCardStatus? Any log that would make this clear? Any test I can run (Apple HW test shows "no problem detected")?
Many thanks for hints.

To show what I am talkin about I did another test. I downloaded and ran LuxMark. There it is possible to test CPU and GPU separately on a same benchmark scene. FIrst I let the system switch to nvidia and did the test:
Then I manually switched to Intel/CPU in gfxCardStatus and also selected CPU in the LuxMark and did the same test. The result is:
You see? How it is possible that in OpenCL computation CPU with internal graphic card is even faster then the descreet one? This is what I am experiencing now and cannot figure out where the problem lies.
Would the Apple HW test discover a dead nvidia card? Because nothing shows that the card is dead but as you can see it is not performing as it should.

Intel 915pm sound card can not work

Similar Messages

Maybe you are looking for