Intel 945GM display driver problem after installing Vista on A100 PSAA8

After upgrading to Vista on Satellite *A100-207 PSAA8E-180049EN*, display adaptor "*Mobile Intel(R) 945GM Express Chipset Family*" does not work. In Device Manager, it reports "*This device cannot find enough free resources that it can use. (Code 12)*". Using the Vista driver on Toshiba Website and also tired latest driver from Intel Website to no avail. Re-installed all Vista drivers in the order recommended on Toshiba Website. Also tried multiple removals and re-additons of various drivers to no avail.
If someone out there has the same model, I would appreciate if you could send a snapshot of device manager screen (collapsed to show sub-devices under main devices). Also a second snapshot of device manager showing resources (Device Manager / View / Resources by type). My e-mail address is: [email protected]
Greatful for any other ideas or suggestions.

Problem resolved by a fresh install of Vista followed by all Vista drivers in order as described in the document on the Toshiba website. Thanks to all who reviewed this question. Don't hesitate to e-mail me for details at [email protected] Happy New Year!

Similar Messages

DVD drive problem after installing 10.5.6

I have MacBook Pro 15",
Model Identifier-MacBookPro 2,2,
Intel Core 2 Duo 2.16 Ghz
Problem: After Installing 10.5.6 from the software update panel, my dvd drive (MATSHITA DVD-R UJ-857D) make eject sounds (sound like ejecting disc) every 10 seconds..
But if I insert cd or dvd disc into the drive, every thing is ok - no sounds, and no ejecting the disc..
Before I install this update, everyting was ok!
Please Help!!
P.S Sorry, for my english

Hi Drug;
Have you tried resetting PRAM by holding down control, option, P and R during reboot?
Allan

Intel HD 5500 driver problem after upgrade to Windows 10

i have upgraded to Win 10 and the original intel 5500 driver didnt work then i had to upgrade the driver from device manager / so i updated the driver but after a restar i got a black screen i went to safe mode and removed the driver but still stuck @ black screen // i downloded the last driver from intel web site for windows 10 but still the same issue i checked the driver page for my mode p211ne but only a wireless monitor update and wireless button

the problem has been fixed by 1- reinstalled win 10 2- win 10 removed intel hd 5500 driver as expected , but i didnt update it manually nor by update from device manager nor make any changes , so i ran windows 10 update tool from system and made all 100% update after restart things are ok now every thing is ok and new intel hd 5500 driver has been installed by win 10 update tool : 10.18.15.4248 //driver date : 29/06/2015 also invidia 840m driver has been updated thanx for any try to help and if any one still stuck with black screen the problem is that win 10 read two monitors instead of 1 so you have to click "windows button + P while black screen already on " and try to hit and click on first choise or other choises till you can see the desktop , sure u cant see any thing while u are trying to choose but you should try or may be you connect another monitor or tv and fix this issue by win button + P good luck

Sync Problems After Installing Vista Service Pack 1

I just installed Vista service pack 1. Hotsync ceased to work. So, after checking Palm online help, I downloaded and installed Desktop 6.2 and Hotsync 7. The instructions said not to uninstall my previous version of Desktop 4.2 and Hotsync 6.01. After completing the installation, I find that my data had not been moved to the new location and that some Hotsync items had changed such as Quick Intall to Install. And, I still can't Hotsync. So, here's a series of questions:
How can I get my data over to Desktop 6.2?
Do I want to move the data over or should I reinstall Desktop 4.2? (I use an XP machine to print my schedule and usually simply copy the user folder from the Vista system to the XP system. There's no Vista print driver available for my hp printer.)
Is Palm trying to become Microsoft by changing where they store information to the confusion of a power user?
Any and all help would be appreciated.
Post relates to: Palm Vx

The version 6.2 of Palm desktop does not support your Vx.
Click here for the support page for 6.2; http://www.palm.com/us/support/downloads/windesk62.html
The only handhelds supported are Palm TX, Z22; Tungsten E2.
You will need to install the version that is on the CD that came with the Vx. You will need to "clean" uninstall Palm desktop on the Vista PC in order to re-install the older version of Palm desktop.
First thing to consider is, where is the current data. On the device or in the PC?
If you have the data in Palm desktop 6.2, do an export of the data for backup. After the re-install of the older palm desktop, import the data for each category. Since you are still using the XP PC and has data on that system, you can export the data from that PC.
In Vista, the userfolder is in documents-palm os desktop. One caveat here, the data format in the 6.2 user folder is not compatible with the data format in earlier versions of Palm desktop so you cannot copy and paste the entire user folder into the older version of Palm desktop.
Here is a procedure for backing up your data.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
To do the "clean" uninstall on the Vista PC, here are the instructions.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Disregard the first step above because your data is on the XP PC and we are just going to import the data.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before create a hotsync name.
Post relates to: Palm i705

Serious external drive problems after installing Mavericks

OK, so now I am seeing multiple external drive problems. Here is my setup: A GTech 4TB drive connected to MacBook Pro via Firewire, formatted of 2 partitions of 2TB each (called GT1 and GT2). This is then daisy chained to two WD drives of 2TB each, called WD1 and WD2.
After installing Mavericks everything worked fine (in fact I have an amazing speed increase). However, after restarting my machine this morning I have the following issues:
The GTech is now a single partition called MyBook (obviously a hangover from the WD drives. I suspect the WD drive managment software) with NO data files. Interestingly it shows the following USED 1,106,870,272 bytes (1.11 GB on disk). This suggests that one of the partitions has disapeared completely.
Whilst WD 1 launces ok, WD 2 causes the Finder to relaunch whenever selected, meaning I can't get to the files. I remember having this problem before when I upgraded to SL, and it having something to do with hidden files that needed to be deleted via the terminal. However, I have searched the web and can't find the solution again.
Given that WD 1 and 2 are my backups of GT 1 and 2, then I now have a situation where I cannot access my primary or backup files for GT 2. Very impressive - not!
Can anbody remember the hidden file solution for the finder relaunch?
Can anybody help me get back my GT1 and 2 partitions (as they have the latest work on them)?

FIrewire & Thunder bolt drives are having issues with Mavericks, avoid same until a fix is issued if you can.
many are reporting same, there is a firewire fault and TB HD on external HD from LaCie (Seagate) and from WD especially.
Technicians are looking into it.
Until there is resolution, consider setting up a USB ext. Time machine HD.
Until then consider confining Mavericks use with USB HD.
Ive tested a very long line of USB HD on Mavericks, all seem fine.
Recommend anyone DO NOT ATTACH any WD MyBook externals (firewire, thunderbolt or otherwise).
I dont have same to test, so I dont know if the problem is in the firmware on the SATA bridge or if its a problem with the WD software

Problem after Installing Vista - Anyone know how to make it Mac by default?

Sup everyone,
I have Leopard installed on my iMac (the new one), and i installed windows Vista, but now every time i turn on my iMac, it goes straight to Vista. I want it to start on Apple by default.
How do i do that exactly(step by step)? besides having to hold the option key at start-up...
Thanxz in advance to whoever helps me solve this...

While in Mac, go to System Preferences/Startup Disk - click on Mac OS 10xxx and if you want, in the lower left of this window you can lock your selection.
Also, there is an option while in Vista, open the Boot Camp tray. I would not select either Mac or Vista there, since if you have to restart Vista after a windows upgrade, it might restart in Mac. Then to get back to Vista, you would have to shut down Mac, then use the option key to get back into windows. (This part is a little iffy since I haven't had any upgrades in Vista yet)!

X301 problems after installing driver updates - won't come out of sleep mode

We have a new X301 with Vista 32 installed. Things were working fine until I ran system update the other day. I've set the power options so not shutdown hibernate, however, after a period of time the system seems to go to sleep or to a screen saver and will not come out of whatever state it is in. The only solution is to power off/on the system.
I have an X500 where there were display driver problems if there was an external monitor (dual monitor) attached. The only thing I can think of is that either there is some similar issue with the X301 since we have an external monitor attached or there is something that was messed up with the drivers that were installed. I do have (for now) restore points before these drivers were installed but I'm not ready to take that drastic step yet (or a full system restore and start over).
Anyone experience this type of issue or have any suggestions?
Thanks
Neil

Sadly, I had the issue resurface today. It went into standby/sleep mode while I was in a meeting (on battery power), and later I tried to wake it, and all I got was a black screen with a mouse cursor.
The keyboard brightness and volume keys on the keyboard were responsive (I could hear the audio level clicks as I changed it), but the visual overlay didn't show (where it shows the white speaker graphic with the bar of rectangles representing volume level). Also, the screen brightness keys did nothing.
I finally used Ctrl + Cmd + Power to force a restart. Luckily, my user account didn't get completely hosed like it did a couple weeks ago.
So, it looks like Migration Assistant isn't the culprit here. This is the system I just finished rebuilding. So it's either a bug in OS X/Mavericks, or it's due to an application I have running, or a configuration change I've made.
It seems to only happen when I'm on battery power, for what that's worth. I don't recall it ever happening when I'm plugged in. I have Power Nap disabled while on battery power, btw.
I'm going to enable SSH access so I can try to SSH in the next time this happens. Perhaps that will provide useful diagnostic info.
Anyone have any tips or suggestions?

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
But I Wont be Able To Play Games & Other Apps Please Solve This And Give Me Link For Video Card Driver Or
Graphic Card Driver For Windows 7 32-bit (x86)
THANKS
PROFESSOR TOM........................................

Hi:
See if this W7 32 bit graphics driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en...

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

No Wireless or Ethernet Driver After Installing Vista Ultimate on New Mac

After installing Vista Ultimate 32 bit on my 17" 2.6 GHz MacBook Pro (486 gb hard drive, 101 gb bootcamp partition), (4 gb ram) The Vista Installation has no Driver Listed (or connectivity) for either the Apple Wireless or Ethernet drivers.
Any thoughts?

Did you install the drivers from the computer's software install DVD?
Please post further questions regarding Boot Camp in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

Problems after installing Windows 7 Professional on Thinkpad T61

I have an old T61 that had Windows Vista installed. I wanted to use Windows 7 but didn't want to wipe out what I already had (for various reasons). So I bought a new disk drive and did a clean install of Windows 7 Professional. The disk drive is a Western Digital Blue Notebook 1TB drive. After installing the drive in the machine, I followed these instructions to install Windows 7: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74108. I chose to partition the drive into a C: drive (500GB) and a D: drive (431GB). After the install completed, I downloaded all the available Microsoft fixes (this took some time to complete).
For the Device Driver and Application install, I used the ThinkVantage System Update option. The site indicated that Microsoft .NET Framework 3.5 with Service Pack 1 or later was required. I downloaded and installed version 4. There were additional Microsoft fixes for version 4, which I downloaded and installed also. Then I downloaded and installed ThinkVantage System Update 5.03. I then executed System Update and selected all the available updates. They all installed, except for Windows 7 Update Module KB2615763 64bit. This update, after failing, gave the option to install manually but when I click on that option I receive a pop up saying: Installer encountered an error: 0xc8000247. The title of the pop up says Windows Update Standalone Installer.
I then attempted to install various applications on the machine: FileZilla FTP Client, Google Chrome, Notepad++, PrimoPDF were all installed without problems. When I installed a Cisco VPN Client for 64 bit machines, however, I was knocked off the network. Clicking on the WiFi symbol in the task bar showed that I had only limited connectivity to the network. I tried to do a IPCONFIG /ALL and neither the WiFi adapter nor the Ethernet LAN adapter showed up in the list. I uninstalled the VPN Client, from the Control Panel, and was immediately able to connect to the network. An IPCONFIG /ALL now showed all the network adapters. I installed/uninstalled the VPN Client several times just to make sure that it was causing the problem of no network connectivity.
I fgured that there might be updated network adapter drivers available to resolve the problem so I attempted both System Update and Windows Update again. System Update showed nothing available, except Windows 7 Update Module KB2615763 64bit. Windows Update had a message saying "Check for updates for your computer" but when I clicked on "Check for updates" it popped up a message saying "Windows Update cannot check for updates because the service is not running. You may need to restart your machine." I checked and the Windows Update service is running. I stopped and restarted it but received the same message when I tried to check for updates again. I rebooted the machine and tried Windows Update again. Same pop up message.
I tried the "Fix problems with Windows Update" option in the Control Panel but received a message saying - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting. The error details say:
Package ID: WindowsUpdateDiagnostic
Path: Unknown
Error Code: 0x8E5E0247
Source: Engine
I tried some of the other troubleshooting options and they all give similar errors - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting.
I then thought it might be a disk drive problem so I tried to do a CHKDSK /F but when the machine reboots the CHKDSK seems to start (there is a message that says it can be interrupted by pressing a key within 10 seconds) then, before the 10 seconds are up, it ends without checking the disk and the machine continues to boot up.
Has anyone seen any of these problems before? Did I miss something? Could this be related to the disk drive? Or missing device drivers? Bios?
Any help with this will be appreciated.
Solved!
Go to Solution.

A laptop drive that size is almost certainly an AF drive. You can check by looking up the model's specs on the vendor's site. You can also use the fsutil command to check the drive's physical sector size and verify that the size isn't getting reported correctly - which is what usually causes the update problem.
http://support.microsoft.com/kb/982018
Expand the "Issue 6 Fsutil.exe tool" entry in that link for more info. The entire KB may also be helpful.
If my guess is actually the problem you won't have to reinstall Windows 7. Just update - or roll back - the driver. You might first try going to Device Manager, selecting the storage controller, and rolling back to an earlier driver.
If that works, configure ThinkVantage System Update to not show the offending driver, or this will happen again. If that doesn't do the job, go to Intel's site and find the latest Matrix Storage Manager or Rapid Storage Technology that is specified for your chipset and operating system. Or just try the latest and if that doesn't work, try earlier ones.
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Software+Products&ProductL...
Here's a local KB addressing this (presumed) issue: http://forums.lenovo.com/t5/Windows-7-Knowledge-Base/Windows-Update-Fails-After-Installing-New-Hard-...
To repeat, this is a bit of a guess. It's pretty likely that your storage driver is the culprit. Either you need one new enough to support the physical size reporting ioctl, or you've been bitten by TVSU "updating" to a buggy driver. Either way the corrrect driver should fix things.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

DW CS3 preview issue after installing Vista SP2

I have DW CS3 installed on my desktop and laptop computers. One computer uses vista64 and the other vista32. After installing vista service pack 2, I now have the following issue previewing PHP pages under Apache: All browsers give me a "cannot display the webpage" error UNLESS I am connected to some kind of network--it could be the internet or my peer-to-peer network. My destop computer is attached to a printer via RJ45 cable. If the printer is turned on, I can preview webpages in DW. If the printer is turned off, I cannot! Or, if I am connected to the internet through my wireless internet card, I can preview pages, otherwise, not.
Previous to installing SP2, I was able to preview pages on both computers without the need to be connected to a network, so I am pretty sure that SP2 is involved in this new issue.
When Apache and MySQL start up in the XAMPP control panel, there are no errors, and I can go into PHPMyAdmin just fine.
Has anyone else run into this? Any thoughts?

I'm just following up here. I have not solved the issue, but I did figure out that the problem isn't with vista service pack 2 but with Kaspersky anti-virus 2009.

Problem after installing 10.4.8

Hello,
I installed the 10.4.8 update today. I have a brand new macbook. When the update finished downloading, my screen just turned blank, my computer didn't react at all. I could hear the fan and that was it.
So, I waited for some minutes, nothing happened. I decided to restart it by pressing the power button for a few seconds.
The computer is working perfectly now and the update was installed. But, how do I know if my computer or the HD were affected? I ran the HD test and it says that the HD seems OK.
Is that a problem with my computer or is it because of the new update? I read a posting that mentioned similar problems after installing the new update.
Thanks...

How did you update? Mac OS X 10.4.8 Update (delta)?
http://docs.info.apple.com/article.html?artnum=304200
After installing the delta version of this update on an Intel-based Mac, the computer will restart two times--the first restart after installing this update may take several minutes; please allow it to complete.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 
2.0 MacBook • 100GB HD • 2GB RAM Mac OS X (10.4.7) 60G Photo iPod • AppleCare

Aperture crashes when doing enhancements crashed at thread 35 which i think is a display driver problem any ideas folks

Aperture keeps crashing every time I try and do some auto enhancements crash log comes up with crashed at thread 35 or 36 which seems to point to a display driver problem imac 2.16 intel core 2 duo 3gb ram os x 10.6.7.
This is making aperture unusable I might go back to lightroom never had these problems with it.
Graham

Hi yes I'm running 3.1.2 I have tried 32 bit mode and it does just the same.
Graham

Intel 945GM display driver problem after installing Vista on A100 PSAA8

Similar Messages

Maybe you are looking for