Intel+AMD Graphics no drivers available?

Hello,
I updated to Windows 8.1 and I can not find any working graphics driver for my ultrabook Hp Envy 4 1103TX.
I downloaded the .exe file from Hp (for windows 8) and tried to install...
Result....
Without any of the drivers (intel's or AMD's) its very difficult for me to work around.
I also tried installing Generic versions of the drivers but it crashes very often.
i cant even inc/dec the screen brightness....my pc's looking like crap/...
PLEASE HELP!
My product is still under warrenty.
If Hp doesent Roll out updates for it's products Who will?

Dont worry , somebody close HP allways with You!!!
Your driver is available on
http://support.amd.com/en-us/download
just choose 32 or 64 version.
GOOD LUCK,enjoy HP

Similar Messages

  • V570 - unable to toggle brightness despite installing newest Intel HD Graphics 3k Drivers

    I'm not entirely sure what happened to my machine, it used to work when I got it out of the box. I was able to toggle the brightness higher/lower, but now it stays maxed out. By brightness, I mean the LCD display backlight is at full brightness. I am unable to turn it down by pressing FN + Down Arrow as well.
    See this screenshot:
    http://i.imgur.com/0PfHQ9O.png
    Basically, whenever I try to press FN + Up or Down arrow it stays there and is unable to change. I think this is some kind of problem with Windows Drivers, as I have tried to load my Ubuntu Linux distro and was able to change the brightness there. I know it's not a hardware issue, it's most likely a software issue. I have tried re-installing my graphics drivers many times, and I know my Intel Integrated HD 3000 Graphics Driver is up-to-date.
    If you have any suggestions or advice, please leave a reply below. Oh, I am tech-savvy so I will be able to follow your replies, there will be no need to dumb it down for the average electronics consumer!
    Thanks in advance.

    This is your problem:
    (From your dxdiag) Intel HD 3000  Driver Version: 9.17.10.2932
    These are the drivers that work on the 470/570's
    Win 8 Version
    9.17.10.2828 (HD Audio 6.14.0.3097)
    Win 7 Version
    8.15.10.2462
    See this FAQ:
    http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Lenovo-Y470-Brightness-Toggle-Problem/ta-...
    Or this thread:
    http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Lenovo-Y470-Brightness-Toggle-Problem/m-p/5...
    This affects all 470/570 models.
    If you want the On Screen Display to work, either roll back your Intel HD 3000 display drivers to the original Lenovo driver, or download the display driver from the Lenovo site. 
    Note: The Windows update site WILL install newer versions of this driver, so you may run across this problem again. To make sure it doesn't, exclude the Video update when you do the procedure. (make hidden).
    DragonRider
    I'm DO'ing IT
    Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
    IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
    YOGA Tablet 2 Pro-1380F
    X1 Carbon 2nd Gen (20A8) ThinkPad + T420

  • T530 with 2 display adapters - NVIDIA NVS 5400M and Intel HD Graphics 4000 Drivers not loading

    Both the Nvidia and Intel graphic drivers show in device manager that they have problem and can't load properly. I have tried uninstalling both they both reinstalled on a reboot with same issues. Is this hardware or corrupt drivers?? Or?

    Failure progressed to a point where I could login remotely (GoToAssist) and see the screen but the LCD and External Monitor both were black.
    Called tech support, they dispatched a tech (after 3 days, and a bunch of phone calls).  They replaced the system board and display board?  same problem.  Their answer was I needed to reimage the machine.
    I found out that Windows had done an update.  We did a system restore to before the update (30 some updates) and restored the local displays.
    BUT....both the NVidia and Intel HP Graphics devices in Device Manager indicate problems.  And this was after reinstalling the video drivers I pulled down from Lenovo.
    Any thoughts on where I go next??  Lenovo has washed their hands of this problem....
    I am about to wash my hands of Lenovo as a vendor for PCs. 
    Larry

  • Wifi Not Working!!! AMD Graphic Card Drivers Not Available as well!!

    Hello Everyone, I bought this HP 15-ac025TX (M9V00PA) Notebook laptop and I am having the same problem that others on this forum with this notebook are having i.e. wifi is not working/available and AMD/Intel Switchable High-Definition (HD) Graphics Driver is not available for download. I saw one solved post regarding this problem but the guy had Windows 7 32 bit and also I couldn't understand much that was discussed in that post. Here is the link to that post: http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Network-controller-amp-USB-controller-driver-not-found-and/td-p/5177717 And yes, I have downloaded all the available drivers on the hp site. Help Needed!!

    Hi: These wifi and BT drivers should work... Wifi: ftp://ftp.hp.com/pub/softpaq/sp71501-72000/sp71528​.exe Bluetooth: This package contains the Broadcom bluetooth driver and software for supported notebook models that are running a supported operating system. Broadcom Bluetooth 4.0 Driver is required to enable Broadcom bluetooth 4.0 devices and is compatible with Broadcom bluetooth 3.0 and earlier versions. File name: sp71440.exe I reported the graphics driver problem to HP a couple of weeks ago.  I hope they get that sorted out soon!

  • Can't update AMD graphics card drivers in Macbook Pro 15" 2011

    I've been having this problem for a while now, and from what I understand, it's a fairly common issue with bootcamp but I have not been able to find a solution to the problem nonetheless. I am using a 15" Macbook Pro from 2011 (purchased in early September, not sure if that was before the 'late 2011' model or not), running Windows 7 Home Premium x64 through bootcamp v4.0. The graphics card is an AMD Radeon HD 6750m last updated on 6/13/2011 to version 8.812.0.0.
    I have tried many times to update the card using the AMD catalyst control center supposedly made for windows 7 in bootcamp, but no matter what compatibility options I choose, the installer either tells me there is no graphics adapter (auto detect) or just crashes immediately after starting installation of the catalyst control center. I've also attempted reinstalling bootcamp several times, each with a fresh download of the windows support software, though I have not completely uninstalled Windows 7. I'm not sure if the problem is with the bootcamp drivers themselves or with AMD's software or a combination of both, and a solution would be greatly appreciated.
    Also, I know this is completely the wrong spot for this, but while I'm here, does anybody else have issues running EA's Origin download service? I just installed it in bootcamp a few days ago to play Mass Effect 3, and ever since then my computer gets display lag (e.g. in windows media player the video freezes for a few seconds at a time, while the sound continues playing) sometimes, especially during and after attempting to play Mass Effect 3. I already checked to make sure that both Origin and Mass Effect 3 are fully up to date, so I thought it might have something to do with the graphics card.
    Anyway, thanks for the assistance, and I apologize for asking a question that has probably been answered several times. I searched through several posts, I couldn't find any answers to my problem.

    Despite all of these helpful posts from the community, I'm still coming up short. I'm attempting to update my ATI Radeon HD 6770m driver on windows 7 64-bit. I've followed this guide:
    https://discussions.apple.com/thread/3866652?start=0&tstart=0
    (third post down) - I also use Drive Sweeper after using CCCleaner and device manager uninstall.
    Every time I attempt to install the driver after rebooting, I receive an error message stating "Driver install: the INF file was not found" with a log stating that the driver failed to install upon completion.
    When I attempt to use control panel>Device Manager>Display Adapters>Update Driver Software>Browse My Computer For Driver Software and then choose the appropriate file path (including subfolders) or by choosing from a list of device drivers and selecting one of the two inf files in c:/amd/support/12-2_mobility../packages/drivers/display/w76a_inf, I receive the following error message:
    "Windows Encountered a problem installing the driver software for your device
    Windows found driver software for your device but encountered an error while attempting to install it.
    AMD Radeon HD 6700m Series
    There is no driver selected for the device information set or element.
    If you know the manufacturer of your device, you can visit its website and check the support section for driver software."
    I'm hitting nothing but dead ends here. I just want to play SWTOR with an updated driver!
    Please provide a detailed, step-by-step solution (if you have one). It is not safe to assume that I have any experience regarding graphics drivers or running windows in bootcamp. Thanks in advance.

  • X230T and OLD Intel HD Graphics 4000 drivers

    the X230T won't let me update the graphics drivers, reporting them as newest (at least for Windows 7?), but version 9.18.10.3359 is from 2013, and my Adobe products keep complaining i need to update my drivers to use their performance features (don't even get me started on all the pen pressure issues i've had). isn't there a newer compatible driver?

    Try this one?
    http://www.station-drivers.com/index.php/outils/Drivers/Intel/HD--and--Iris-Graphics/Serie-15.33.x/Intel-HD--and--Iris-Graphics-Drivers-Version-15.33.38.64.4252-WHQL/
    Wrong link.
    http://www.station-drivers.com/index.php/outils/Drivers/Intel/HD--and--Iris-Graphics/Serie-15.33.x/Intel-HD--and--Iris-Graphics-Drivers-Version-15.33.37.64.4242-WHQL/

  • Satellite C660 - Intel HD Graphics update issue

    Hello,
    sorry for my English level, I'm French
    I have an issue without solution with my Satellite C660 (for the moment i hope!) I downloaded the software google sketchup 8, dedicated to the architecture drawing, but it doesnt work, I always have a bug message informing that it is necessary to update de drivers of the graphic card (According to google support it seems that OPENGL functions should be implemented in the drivers of my laptop)
    So I have downloaded the last available drivers for the configuration I have ( Intel HD graphics for pentium, windows 7 64 bits) ;
    the link ( french website, the one for Intel is not currently available, it is an .exe document)
    http://www.touslesdrivers.com/php/constructeurs/telechargement.php?v_code=37057&v_langue=fr
    I have tried to manually update de graphic card driver with the device manager menu (graphics card > update the drivers button> manual file.exe selection ), but at the end there is no update, I only have a very quick message informing that windows has determinated that the drivers are already updated.
    Actually there is no changes on the drivers (still the same date of the pilotes 28/07/2010 in the graphics card properties) and sketchup is still out of work
    Any suggestions?
    Thanks in advance

    Hello
    Thank you for the reply, the type of the laptop is the C660 2RG with windows 7.
    Regarding the Intel HD graphics I've tried to download it directly in Intel website but the appropriate file (name Intel HD graphics for Intel Pentium and Celeron Processors with Intel HD Graphics) is not available, when you click on itn you have a displayed screen which propose to scan you laptop in order to determinate your needs
    But even with this function you have at the end a message telling that the configuration is specifically done by the laptop builder and no action could be taken.
    To run the application Sketchup i need, the driver must support the OpenGL components (usually available in the graphics cards driver, but it seems that Toshiba configuation has been done without it)
    Thanks

  • [W520] Can't install updates for Intel WiDi or WiFi drivers

    The Lenovo ThinkVantage System Update is telling me there are Intel WiDi and WiFi drivers available.  When I try to install them they seem to install fine, I get a Windows pop-up saying 'you're new hardware has installed correctly', then my system restarts and the updates are still listed as new available updates.  In the ThinkVantage update history it says for both "Did not install".  When I look at the driver version for the WiFi driver it is 14.03.0000.0 but I already have version 15.1.0.18 according to the ThinkBantage Toolbox System Information.  So I already have the newest drivers?  Why is the Update tool prompting for these updates?  Should I just hide these updates?  I don't care about WiDi but I'd like to have the newest WiFi drivers.
    W520 i7-2720QM | 32 GB RAM 1333 MHz | FHD 1920x1080 | Quadro 1000M | Windows 7 & Ubuntu 14.04
    Crucial M500 480GB mSATA + 2 x 1 TB Hitachi Travelstar 7200 rpm | BIOS 1.38

    Hello biznatch,
    I understand the frustration this must cause you.  If You uninstall and reinstall the System update and the WiDi and WiFi drivers. This could fix your problem.
    You can find the System Update Driver here:
    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063273
    Here is the WiDi Driver:
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014948
    And Here is the WiFi Driver:
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS030245
    Let us know how it goes,
    I hope this helps,
    Alex
    Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve the problem you encountered? Click Solution Provided to let us know!
    What we Do in Life will Echo through Eternity. -Maximus Aurelius

  • AMD 5650/Intel switchable graphics setup configuration woes

    I was wondering if someone could help me with my POS HP DV7-4100 ATI Radeon 5650/Intel switchable graphics setup.  I'm so annoyed with this and don't know how to proceed but it looks like I'm not completing the configuration properly.
    I have tried seemingly everything so far: 
    Catalyst w/ Catalyst-utils
    Catalyst-hook
    Catalyst w & w/out utils-pxp
    Catalyst-total-pxp
    Anyway, loading catalyst without xorg.conf seems to get me the closest to a working setup but once I log into Cinnamon, I get a message saying that it has loaded in fallback mode and if I would like to try to restart cinnamon (nothing happens).
    This leads me to believe that this is a config issue.
    This is the dmesg without an xorg.conf file.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
    [ 0.000000] [mem 0x25be00000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
    [ 0.000000] [mem 0x258000000-0x25bdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
    [ 0.000000] [mem 0x200000000-0x257ffffff] page 2M
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x9b5fffff] page 2M
    [ 0.000000] [mem 0x9b600000-0x9b63efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] [mem 0x9b7ff000-0x9b7fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000009b75e000 00040
    [ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
    [ 0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
    [ 0.000000] NODE_DATA [mem 0x25bff5000-0x25bff9fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25bffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b63efff]
    [ 0.000000] node 0: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] node 0: [mem 0x200000000-0x25bffffff]
    [ 0.000000] On node 0 totalpages: 2045404
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9881 pages used for memmap
    [ 0.000000] DMA32 zone: 632384 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22272 pages used for memmap
    [ 0.000000] Normal zone: 1409024 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
    [ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013166
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7968736K/8181616K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2527.100 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.79 BogoMIPS (lpj=8423666)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000033] Security Framework initialized
    [ 0.000044] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000045] Yama: becoming mindful.
    [ 0.000537] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002402] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003219] Mount-cache hash table entries: 256
    [ 0.003418] Initializing cgroup subsys memory
    [ 0.003430] Initializing cgroup subsys devices
    [ 0.003432] Initializing cgroup subsys freezer
    [ 0.003434] Initializing cgroup subsys net_cls
    [ 0.003435] Initializing cgroup subsys blkio
    [ 0.003456] CPU: Physical Processor ID: 0
    [ 0.003457] CPU: Processor Core ID: 0
    [ 0.003463] mce: CPU supports 9 MCE banks
    [ 0.003473] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003483] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003568] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.004537] ACPI: Core revision 20130725
    [ 0.013846] ACPI: All ACPI Tables successfully acquired
    [ 0.038849] ftrace: allocating 20318 entries in 80 pages
    [ 0.048808] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.081797] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
    [ 0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.187283] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.187285] ... version: 3
    [ 0.187286] ... bit width: 48
    [ 0.187287] ... generic registers: 4
    [ 0.187288] ... value mask: 0000ffffffffffff
    [ 0.187288] ... max period: 000000007fffffff
    [ 0.187289] ... fixed-purpose events: 3
    [ 0.187290] ... event mask: 000000070000000f
    [ 0.660504] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.647139] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.700394] Brought up 4 CPUs
    [ 0.700400] smpboot: Total of 4 processors activated (20224.16 BogoMIPS)
    [ 0.702976] devtmpfs: initialized
    [ 0.705408] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
    [ 0.706249] RTC time: 18:58:44, date: 01/06/14
    [ 0.706292] NET: Registered protocol family 16
    [ 0.706388] cpuidle: using governor ladder
    [ 0.706389] cpuidle: using governor menu
    [ 0.706414] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.706416] ACPI: bus type PCI registered
    [ 0.706418] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.706482] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.706485] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
    [ 0.713484] PCI: Using configuration type 1 for base access
    [ 0.714057] bio: create slab <bio-0> at 0
    [ 0.714171] ACPI: Added _OSI(Module Device)
    [ 0.714172] ACPI: Added _OSI(Processor Device)
    [ 0.714174] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.714175] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.715777] ACPI: EC: Look up EC in DSDT
    [ 0.723731] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.729362] ACPI: SSDT 000000009b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.729739] ACPI: Dynamic OEM Table Load:
    [ 0.729741] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.729882] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.730243] ACPI: Dynamic OEM Table Load:
    [ 0.730245] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.750624] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.751035] ACPI: Dynamic OEM Table Load:
    [ 0.751037] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.760515] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.760902] ACPI: Dynamic OEM Table Load:
    [ 0.760904] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.813748] ACPI: Interpreter enabled
    [ 0.813763] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.813769] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.813788] ACPI: (supports S0 S3 S4 S5)
    [ 0.813790] ACPI: Using IOAPIC for interrupt routing
    [ 0.813825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.813932] ACPI: No dock devices found.
    [ 1.447844] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
    [ 1.447876] \_SB_.PCI0:_OSC invalid UUID
    [ 1.447877] _OSC request data:1 8 0
    [ 1.447907] \_SB_.PCI0:_OSC invalid UUID
    [ 1.447908] _OSC request data:1 1f 0
    [ 1.447911] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.447913] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.448565] ACPI: \_SB_.PCI0.ACEL: can't evaluate _ADR (0x5)
    [ 1.448567] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 1.448573] PCI host bridge to bus 0000:00
    [ 1.448575] pci_bus 0000:00: root bus resource [bus 00-7e]
    [ 1.448577] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.448578] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.448580] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.448581] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
    [ 1.448589] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
    [ 1.448606] DMAR: Disabling batched IOTLB flush on Ironlake
    [ 1.448669] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
    [ 1.448699] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.448735] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.448767] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
    [ 1.448778] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 1.448783] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.448787] pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
    [ 1.448892] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 1.448920] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
    [ 1.449016] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.449101] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 1.449515] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
    [ 1.451973] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.452031] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.452072] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 1.452093] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
    [ 1.452188] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.452234] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.452267] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 1.452365] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.452412] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.452444] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 1.452541] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.452588] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.452634] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 1.453043] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
    [ 1.455490] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.455548] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.455583] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 1.455686] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 1.455720] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
    [ 1.455888] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
    [ 1.455915] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
    [ 1.455926] pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
    [ 1.455937] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
    [ 1.455947] pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
    [ 1.455958] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
    [ 1.455969] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
    [ 1.456035] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.456106] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 1.456126] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
    [ 1.456155] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
    [ 1.456246] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
    [ 1.456272] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
    [ 1.456465] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
    [ 1.456479] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.456489] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
    [ 1.456496] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
    [ 1.456507] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    [ 1.456544] pci 0000:01:00.0: supports D1 D2
    [ 1.456587] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
    [ 1.456603] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
    [ 1.456673] pci 0000:01:00.1: supports D1 D2
    [ 1.456730] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.456732] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.456735] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.456738] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.456862] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
    [ 1.456921] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
    [ 1.457132] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.466741] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.466749] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.466756] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.466765] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.466869] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.466888] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.466916] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
    [ 1.466934] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
    [ 1.466946] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 1.467011] pci 0000:03:00.0: supports D1 D2
    [ 1.467012] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.467054] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 1.476687] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.476695] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.476702] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.476712] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.476826] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    [ 1.476839] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.476840] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.476842] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.476843] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
    [ 1.477284] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.477332] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.477378] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.477428] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.477474] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.477521] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.477569] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.477615] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.680263] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
    [ 1.680266] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.680268] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.680328] PCI host bridge to bus 0000:7f
    [ 1.680331] pci_bus 0000:7f: root bus resource [bus 7f]
    [ 1.680335] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
    [ 1.680372] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
    [ 1.680411] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
    [ 1.680444] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
    [ 1.680478] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
    [ 1.680511] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
    [ 1.680856] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 1.680862] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.680897] ACPI: \_SB_.CPBG: notify handler is installed
    [ 1.680908] Found 2 acpi root devices
    [ 1.680944] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 1.681029] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.681034] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.681036] vgaarb: loaded
    [ 1.681036] vgaarb: bridge control possible 0000:01:00.0
    [ 1.681037] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.681073] PCI: Using ACPI for IRQ routing
    [ 1.685883] PCI: pci_cache_line_size set to 64 bytes
    [ 1.685985] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 1.685987] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
    [ 1.685988] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
    [ 1.686076] NetLabel: Initializing
    [ 1.686077] NetLabel: domain hash size = 128
    [ 1.686078] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.686090] NetLabel: unlabeled traffic allowed by default
    [ 1.686116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.686121] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.688150] Switched to clocksource hpet
    [ 1.692075] pnp: PnP ACPI init
    [ 1.692093] ACPI: bus type PNP registered
    [ 1.692220] pnp 00:00: [dma 4]
    [ 1.692249] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.692269] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.692384] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.692417] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.692471] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 1.692473] system 00:04: [io 0x0800-0x080f] has been reserved
    [ 1.692475] system 00:04: [io 0xffff] has been reserved
    [ 1.692477] system 00:04: [io 0xffff] has been reserved
    [ 1.692479] system 00:04: [io 0x0400-0x047f] could not be reserved
    [ 1.692480] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.692482] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 1.692484] system 00:04: [io 0x0380-0x038e] has been reserved
    [ 1.692487] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.692512] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.692543] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.692578] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.692691] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.692891] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.692893] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.692895] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.692897] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.692899] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
    [ 1.692900] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.692905] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.692906] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.692908] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
    [ 1.692911] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.891768] pnp: PnP ACPI: found 10 devices
    [ 1.891775] ACPI: bus type PNP unregistered
    [ 1.898277] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 1.898281] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 1.898320] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
    [ 1.898323] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.898326] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.898328] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.898331] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.898334] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.898337] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.898343] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.898347] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.898355] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
    [ 1.898356] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.898359] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.898365] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.898369] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.898376] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 1.898391] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.898392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.898394] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.898395] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.898397] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.898399] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
    [ 1.898400] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.898402] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 1.898403] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
    [ 1.898405] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.898406] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 1.898408] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
    [ 1.898409] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.898411] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 1.898413] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 1.898414] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.898416] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.898448] NET: Registered protocol family 2
    [ 1.898658] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.898905] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.899101] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.899137] TCP: reno registered
    [ 1.899150] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.899184] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.899281] NET: Registered protocol family 1
    [ 1.899297] pci 0000:00:02.0: Boot video device
    [ 1.924902] PCI: CLS 64 bytes, default 64
    [ 1.924949] Unpacking initramfs...
    [ 1.973386] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
    [ 1.973392] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.973394] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
    [ 1.973427] Simple Boot Flag at 0x44 set to 0x1
    [ 1.973607] Scanning for low memory corruption every 60 seconds
    [ 1.973892] audit: initializing netlink socket (disabled)
    [ 1.973905] type=2000 audit(1389034724.406:1): initialized
    [ 1.984356] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.985602] zbud: loaded
    [ 1.985767] VFS: Disk quotas dquot_6.5.2
    [ 1.985802] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.985955] msgmni has been set to 15569
    [ 1.986298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.986347] io scheduler noop registered
    [ 1.986349] io scheduler deadline registered
    [ 1.986371] io scheduler cfq registered (default)
    [ 1.986564] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.986816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.986829] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.986868] vesafb: mode is 1600x900x32, linelength=6400, pages=0
    [ 1.986869] vesafb: scrolling: redraw
    [ 1.986870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.987210] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
    [ 2.194780] Console: switching to colour frame buffer device 200x56
    [ 2.401807] fb0: VESA VGA frame buffer device
    [ 2.401818] intel_idle: MWAIT substates: 0x1120
    [ 2.401819] intel_idle: v0.4 model 0x25
    [ 2.401820] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.401952] GHES: HEST is not enabled!
    [ 2.402009] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.402448] Linux agpgart interface v0.103
    [ 2.402509] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.424294] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.424318] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.424413] mousedev: PS/2 mouse device common for all mice
    [ 2.426083] rtc_cmos 00:05: RTC can wake from S4
    [ 2.426226] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.426258] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.426312] drop_monitor: Initializing network drop monitor service
    [ 2.426376] TCP: cubic registered
    [ 2.426451] NET: Registered protocol family 10
    [ 2.426607] NET: Registered protocol family 17
    [ 2.426615] Key type dns_resolver registered
    [ 2.426872] registered taskstats version 1
    [ 2.427642] Magic number: 14:769:998
    [ 2.427665] pnp 00:00: hash matches
    [ 2.427763] rtc_cmos 00:05: setting system clock to 2014-01-06 18:58:45 UTC (1389034725)
    [ 2.427806] PM: Hibernation image not present or could not be loaded.
    [ 2.428656] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 2.428658] Write protecting the kernel read-only data: 8192k
    [ 2.430898] Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
    [ 2.431903] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 2.444295] systemd-udevd[57]: starting version 208
    [ 2.454799] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.473820] SCSI subsystem initialized
    [ 2.474804] ACPI: bus type USB registered
    [ 2.474841] usbcore: registered new interface driver usbfs
    [ 2.474855] usbcore: registered new interface driver hub
    [ 2.474933] usbcore: registered new device driver usb
    [ 2.474994] libata version 3.00 loaded.
    [ 2.475610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.475775] ehci-pci: EHCI PCI platform driver
    [ 2.475950] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.475967] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.475975] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.475992] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.479915] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.479939] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
    [ 2.487831] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.488136] hub 1-0:1.0: USB hub found
    [ 2.488148] hub 1-0:1.0: 3 ports detected
    [ 2.488623] ahci 0000:00:1f.2: version 3.0
    [ 2.488766] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.488870] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 2.488874] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
    [ 2.488880] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.508305] scsi0 : ahci
    [ 2.508478] scsi1 : ahci
    [ 2.508661] scsi2 : ahci
    [ 2.508872] scsi3 : ahci
    [ 2.509076] scsi4 : ahci
    [ 2.509232] scsi5 : ahci
    [ 2.509314] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
    [ 2.509319] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
    [ 2.509322] ata3: DUMMY
    [ 2.509324] ata4: DUMMY
    [ 2.509328] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
    [ 2.509332] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
    [ 2.509617] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.509640] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.509655] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.509681] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.513619] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.513636] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
    [ 2.521138] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.521432] hub 2-0:1.0: USB hub found
    [ 2.521446] hub 2-0:1.0: 3 ports detected
    [ 2.794491] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.827773] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.827866] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.830049] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
    [ 2.831101] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.831251] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
    [ 2.831257] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 2.832374] ata2.00: configured for UDMA/100
    [ 2.834382] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.841297] ata1.00: configured for UDMA/133
    [ 2.841651] scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F60 2.0 PQ: 0 ANSI: 5
    [ 2.842799] scsi 1:0:0:0: CD-ROM hp BD ROM BC-5501H 2.90 PQ: 0 ANSI: 5
    [ 2.918525] hub 1-1:1.0: USB hub found
    [ 2.918713] hub 1-1:1.0: 6 ports detected
    [ 2.974340] tsc: Refined TSC clocksource calibration: 2527.281 MHz
    [ 3.024393] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 3.148413] hub 2-1:1.0: USB hub found
    [ 3.148604] hub 2-1:1.0: 8 ports detected
    [ 3.227872] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
    [ 3.231028] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
    [ 3.231032] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 3.232183] ata5.00: configured for UDMA/100
    [ 3.232540] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
    [ 3.236887] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
    [ 3.236939] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.236941] sd 4:0:0:0: [sdb] 4096-byte physical blocks
    [ 3.237016] sd 4:0:0:0: [sdb] Write Protect is off
    [ 3.237019] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 3.237035] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.237040] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.237050] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.237086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.237518] sda: sda1 sda2 sda3 sda4
    [ 3.237920] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.237923] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.237954] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.238066] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.280297] sdb: sdb1 sdb3
    [ 3.281140] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 3.320840] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.324133] usbcore: registered new interface driver usbhid
    [ 3.324137] usbhid: USB HID core driver
    [ 3.324888] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
    [ 3.325079] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.1/input0
    [ 3.384362] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
    [ 3.550965] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
    [ 3.714287] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
    [ 3.795307] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.853249] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.854872] systemd[1]: Set hostname to <HP-DV7>.
    [ 3.858373] systemd-fstab-generator[118]: Mount point swap is not a valid path, ignoring.
    [ 3.909882] systemd[1]: Cannot add dependency job for unit atieventsd.service, ignoring: Unit acpid.socket failed to load: No such file or directory.
    [ 3.910099] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.910161] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.910174] systemd[1]: Starting Login Prompts.
    [ 3.910186] systemd[1]: Reached target Login Prompts.
    [ 3.910195] systemd[1]: Starting Remote File Systems.
    [ 3.910203] systemd[1]: Reached target Remote File Systems.
    [ 3.910213] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.910241] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.910250] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.910267] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.910276] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.910299] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.910309] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.910330] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.910359] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.910451] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.910465] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.910492] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.910501] systemd[1]: Starting Paths.
    [ 3.910535] systemd[1]: Reached target Paths.
    [ 3.910550] systemd[1]: Starting udev Kernel Socket.
    [ 3.910571] systemd[1]: Listening on udev Kernel Socket.
    [ 3.910582] systemd[1]: Starting udev Control Socket.
    [ 3.910602] systemd[1]: Listening on udev Control Socket.
    [ 3.910612] systemd[1]: Starting Journal Socket.
    [ 3.910647] systemd[1]: Listening on Journal Socket.
    [ 3.910661] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.911488] systemd[1]: Starting Apply Kernel Variables...
    [ 3.911775] systemd[1]: Mounting Huge Pages File System...
    [ 3.912052] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.914336] systemd[1]: Starting Load Kernel Modules...
    [ 3.919413] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.920515] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.920540] systemd[1]: Starting Journal Service...
    [ 3.920857] systemd[1]: Started Journal Service.
    [ 3.934908] systemd-journald[130]: Vacuuming done, freed 0 bytes
    [ 3.936662] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 3.936668] ACPI: Power Button [PWRB]
    [ 3.936710] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 3.937069] ACPI: Lid Switch [LID0]
    [ 3.937129] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 3.937132] ACPI: Power Button [PWRF]
    [ 3.938040] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 3.938042] AMD IOMMUv2 functionality not available on this system
    [ 3.968968] EXT4-fs (sda4): re-mounted. Opts: discard
    [ 3.974125] Switched to clocksource tsc
    [ 3.990703] systemd-udevd[155]: starting version 208
    [ 3.994113] systemd-journald[130]: Received request to flush runtime journal from PID 1
    [ 4.011409] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 4.011415] Disabling lock debugging due to kernel taint
    [ 4.022291] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
    [ 4.022509] <6>[fglrx] vendor: 1002 device: 68c1 count: 1
    [ 4.022812] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
    [ 4.022823] pci 0000:01:00.0: enabling device (0000 -> 0003)
    [ 4.023031] <6>[fglrx] Kernel PAT support is enabled
    [ 4.023051] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
    [ 4.092258] ACPI: Requesting acpi_cpufreq
    [ 4.101543] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 4.101553] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101558] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101563] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101568] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101573] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101575] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101580] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101585] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101589] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101591] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 4.101595] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 4.101600] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 4.101604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.101606] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 4.103941] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 4.104143] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
    [ 4.106273] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 4.106627] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
    [ 4.106742] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 4.108091] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 4.108226] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 4.108419] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 4.109161] mei_me 0000:00:16.0: setting latency timer to 64
    [ 4.109212] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
    [ 4.116824] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 4.116833] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.125699] [drm] Initialized drm 1.1.0 20060810
    [ 4.151578] [Firmware Bug]: Invalid critical threshold (0)
    [ 4.152801] hp_accel: hardware type DV7 found
    [ 4.153398] lis3lv02d: 8 bits sensor found
    [ 4.162429] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.162451] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 4.162458] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
    [ 4.162734] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 4.163141] [drm] Memory usable by graphics device = 2048M
    [ 4.163146] checking generic (b0000000 580000) vs hw (b0000000 10000000)
    [ 4.163149] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 4.163171] Console: switching to colour dummy device 80x25
    [ 4.163258] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90008efe000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 43
    [ 4.163262] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 4.165071] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.165073] ACPI: Thermal Zone [TZ01] (60 C)
    [ 4.167001] i915 0000:00:02.0: setting latency timer to 64
    [ 4.189598] Bluetooth: Core ver 2.16
    [ 4.189618] NET: Registered protocol family 31
    [ 4.189620] Bluetooth: HCI device and connection manager initialized
    [ 4.189632] Bluetooth: HCI socket layer initialized
    [ 4.189636] Bluetooth: L2CAP socket layer initialized
    [ 4.189642] Bluetooth: SCO socket layer initialized
    [ 4.189750] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.193820] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
    [ 4.200427] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 4.200432] Copyright(c) 2003-2013 Intel Corporation
    [ 4.200504] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 4.200613] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 4.200826] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 4.203438] usbcore: registered new interface driver btusb
    [ 4.206393] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
    [ 4.209620] i915 0000:00:02.0: irq 45 for MSI/MSI-X
    [ 4.209634] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 4.209636] [drm] Driver supports precise vblank timestamp query.
    [ 4.209838] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
    [ 4.212021] input: PC Speaker as /devices/platform/pcspkr/input/input7
    [ 4.224616] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
    [ 4.235557] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 4.235562] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 4.235564] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 4.235566] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 4.235664] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.259013] fbcon: inteldrmfb (fb0) is primary device
    [ 4.262350] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 4.284850] iTCO_vendor_support: vendor-support=0
    [ 4.285523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 4.285561] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 4.285676] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.286793] media: Linux media interface: v0.10
    [ 4.290737] Linux video capture interface: v2.00
    [ 4.301250] systemd-udevd[174]: renamed network interface eth0 to enp3s0
    [ 4.302202] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
    [ 4.304880] cfg80211: World regulatory domain updated:
    [ 4.304881] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 4.304883] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.304883] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.304884] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
    [ 4.304885] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.304886] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.304887] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
    [ 4.309128] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9
    [ 4.309335] usbcore: registered new interface driver uvcvideo
    [ 4.309336] USB Video Class driver (1.1.1)
    [ 4.311646] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
    [ 4.316794] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.325688] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
    [ 4.327465] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
    [ 4.328001] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.337248] systemd-udevd[192]: renamed network interface wlan0 to wlo1
    [ 4.345739] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 4.355989] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.364320] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.398187] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.405698] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.414845] ACPI: AC Adapter [ACAD] (on-line)
    [ 4.415293] wmi: Mapper loaded
    [ 4.435932] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 4.467799] input: HP WMI hotkeys as /devices/virtual/input/input10
    [ 4.498300] r8169 0000:03:00.0 enp3s0: link down
    [ 4.498337] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 5.050228] Console: switching to colour frame buffer device 200x56
    [ 5.056819] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 5.056821] i915 0000:00:02.0: registered panic notifier
    [ 5.062898] acpi device:02: registered as cooling_device5
    [ 5.063042] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 5.063105] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
    [ 5.074847] acpi device:14: registered as cooling_device6
    [ 5.081681] acpi device:15: registered as cooling_device7
    [ 5.081715] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 5.081795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input12
    [ 5.081995] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 5.082246] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 5.096419] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
    [ 5.114610] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 5.114695] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 5.114984] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 5.115037] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
    [ 5.123576] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
    [ 5.343735] wlo1: authenticate with 04:a1:51:18:3f:5a
    [ 5.357336] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
    [ 5.360056] wlo1: authenticated
    [ 5.363243] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
    [ 5.367023] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=1)
    [ 5.370719] wlo1: associated
    [ 5.370764] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
    [ 5.649701] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    [ 5.737424] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [ 9.301633] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
    [ 12.411184] systemd-journald[130]: File /var/log/journal/9f3480e1044d4c389152563598411bae/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 12.848912] fuse init (API version 7.22)
    [ 14.026946] traps: cinnamon[570] trap int3 ip:7ff3d815c289 sp:7fffd52060f0 error:0
    [ 14.114772] systemd-journald[130]: Deleted empty journal /var/log/journal/9f3480e1044d4c389152563598411bae/[email protected]~ (3256320 bytes).
    [ 14.116644] systemd-journald[130]: Vacuuming done, freed 10727424 bytes
    [ 14.129219] systemd-journald[130]: Failed to write entry (26 items, 14336620 bytes) despite vacuuming, ignoring: Argument list too long
    [ 14.305135] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 14.347792] ISO 9660 Extensions: RRIP_1991A
    [ 62.027286] Corrupted low memory at ffff880000006598 (6598 phys) = 100000000000
    [ 62.027363] ------------[ cut here ]------------
    [ 62.027373] WARNING: CPU: 0 PID: 45 at arch/x86/kernel/check.c:140 check_for_bios_corruption+0x10f/0x120()
    [ 62.027375] Memory corruption detected in low memory
    [ 62.027417] Modules linked in: nls_utf8 isofs fuse snd_hda_codec_hdmi snd_hda_codec_idt hp_wmi sparse_keymap joydev intel_powerclamp coretemp kvm_intel kvm crc32c_intel uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media iTCO_wdt iTCO_vendor_support arc4 iwldvm mac80211 microcode psmouse serio_raw pcspkr btusb iwlwifi bluetooth cfg80211 r8169 snd_hda_intel rfkill hp_accel mii i915 thermal snd_hda_codec lis3lv02d wmi snd_hwdep snd_pcm input_polldev drm_kms_helper snd_page_alloc ac video drm snd_timer i2c_i801 i2c_algo_bit snd battery mei_me i2c_core soundcore intel_agp mei shpchp intel_ips intel_gtt lpc_ich acpi_cpufreq processor evdev fglrx(PO) amd_iommu_v2 button ext4 crc16 mbcache jbd2 hid_generic usbhid hid sr_mod cdrom sd_mod ahci ehci_pci ehci_hcd libahci libata scsi_mod
    [ 62.027498] usbcore usb_common
    [ 62.027504] CPU: 0 PID: 45 Comm: kworker/0:2 Tainted: P O 3.12.6-1-ARCH #1
    [ 62.027506] Hardware name: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 62.027511] Workqueue: events check_corruption
    [ 62.027513] 0000000000000009 ffff88024f0b5d30 ffffffff814ee4fb ffff88024f0b5d78
    [ 62.027518] ffff88024f0b5d68 ffffffff81062bcd 0000000000000000 ffff880000010000
    [ 62.027521] ffffffff81a28c50 0000000000000001 ffff880000000000 ffff88024f0b5dc8
    [ 62.027525] Call Trace:
    [ 62.027534] [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
    [ 62.027541] [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
    [ 62.027545] [<ffffffff81062c3c>] warn_slowpath_fmt+0x4c/0x50
    [ 62.027548] [<ffffffff8105046f>] check_for_bios_corruption+0x10f/0x120
    [ 62.027552] [<ffffffff8105048e>] check_corruption+0xe/0x40
    [ 62.027558] [<ffffffff8107dbc7>] process_one_work+0x167/0x450
    [ 62.027561] [<ffffffff8107e5d1>] worker_thread+0x121/0x3a0
    [ 62.027565] [<ffffffff8107e4b0>] ? manage_workers.isra.23+0x2b0/0x2b0
    [ 62.027572] [<ffffffff81084fe0>] kthread+0xc0/0xd0
    [ 62.027576] [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
    [ 62.027581] [<ffffffff814fcffc>] ret_from_fork+0x7c/0xb0
    [ 62.027585] [<ffffffff81084f20>] ? kthread_create_on_node+0x120/0x120
    [ 62.027588] ---[ end trace 7db8b9483b232f3c ]---
    [ 379.895022] systemd-journald[130]: Vacuuming done, freed 7458816 bytes
    [ 382.437200] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
    [ 382.535763] usb-storage 2-1.1:1.0: USB Mass Storage device detected
    [ 382.535904] scsi6 : usb-storage 2-1.1:1.0
    [ 382.536046] usbcore: registered new interface driver usb-storage
    [ 383.537746] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5
    [ 383.539529] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 383.541031] sd 6:0:0:0: [sdc] Write Protect is off
    [ 383.541037] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
    [ 383.542023] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 383.554355] sdc: sdc1
    [ 383.558183] sd 6:0:0:0: [sdc] Attached SCSI removable disk
    If I run aticonfig --intial, xorg does not start and the dmesg output is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bfffff

    I have toyed with the catalyst-total-pxp configuration and it will now launch x but executing a cinnamon session kicks me back out into the console.
    E: Dmesg output and Xorg log both look fine (to me).
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000025bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/144B, BIOS F.29 11/07/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-combining
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25C000000 mask FFC000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b800 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25be00000-0x25bffffff]
    [ 0.000000] [mem 0x25be00000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x258000000-0x25bdfffff]
    [ 0.000000] [mem 0x258000000-0x25bdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x257ffffff]
    [ 0.000000] [mem 0x200000000-0x257ffffff] page 2M
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b63efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x9b5fffff] page 2M
    [ 0.000000] [mem 0x9b600000-0x9b63efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] [mem 0x9b7ff000-0x9b7fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009b7fe120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000009b7e9000 0F50F (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000009b75e000 00040
    [ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
    [ 0.000000] ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: WDAT 000000009b7e1000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 000000009b7de000 01B34 (v01 AmdRef AmdTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025bffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25bffffff]
    [ 0.000000] NODE_DATA [mem 0x25bff5000-0x25bff9fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880253600000-ffff88025b5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25bffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b63efff]
    [ 0.000000] node 0: [mem 0x9b7ff000-0x9b7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] node 0: [mem 0x200000000-0x25bffffff]
    [ 0.000000] On node 0 totalpages: 2045404
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9881 pages used for memmap
    [ 0.000000] DMA32 zone: 632384 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22272 pages used for memmap
    [ 0.000000] Normal zone: 1409024 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
    [ 0.000000] e820: [mem 0xa0000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025bc00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013166
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7968736K/8181616K available (5116K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 212880K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2527.115 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.82 BogoMIPS (lpj=8423716)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000034] Security Framework initialized
    [ 0.000044] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000045] Yama: becoming mindful.
    [ 0.000540] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002404] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003228] Mount-cache hash table entries: 256
    [ 0.003423] Initializing cgroup subsys memory
    [ 0.003435] Initializing cgroup subsys devices
    [ 0.003437] Initializing cgroup subsys freezer
    [ 0.003439] Initializing cgroup subsys net_cls
    [ 0.003440] Initializing cgroup subsys blkio
    [ 0.003461] CPU: Physical Processor ID: 0
    [ 0.003462] CPU: Processor Core ID: 0
    [ 0.003467] mce: CPU supports 9 MCE banks
    [ 0.003478] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003488] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003577] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.004553] ACPI: Core revision 20130725
    [ 0.013862] ACPI: All ACPI Tables successfully acquired
    [ 0.040074] ftrace: allocating 20317 entries in 80 pages
    [ 0.050041] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.083030] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
    [ 0.187276] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.187282] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.187285] ... version: 3
    [ 0.187285] ... bit width: 48
    [ 0.187286] ... generic registers: 4
    [ 0.187287] ... value mask: 0000ffffffffffff
    [ 0.187288] ... max period: 000000007fffffff
    [ 0.187289] ... fixed-purpose events: 3
    [ 0.187290] ... event mask: 000000070000000f
    [ 0.663841] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.650477] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.703729] Brought up 4 CPUs
    [ 0.703734] smpboot: Total of 4 processors activated (20225.29 BogoMIPS)
    [ 0.706247] devtmpfs: initialized
    [ 0.709362] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
    [ 0.710207] RTC time: 6:14:18, date: 01/25/14
    [ 0.710248] NET: Registered protocol family 16
    [ 0.710345] cpuidle: using governor ladder
    [ 0.710347] cpuidle: using governor menu
    [ 0.710375] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.710377] ACPI: bus type PCI registered
    [ 0.710379] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.710443] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.710446] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
    [ 0.717442] PCI: Using configuration type 1 for base access
    [ 0.718023] bio: create slab <bio-0> at 0
    [ 0.718137] ACPI: Added _OSI(Module Device)
    [ 0.718139] ACPI: Added _OSI(Processor Device)
    [ 0.718140] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.718141] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.719738] ACPI: EC: Look up EC in DSDT
    [ 0.727062] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.732709] ACPI: SSDT 000000009b691918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.733085] ACPI: Dynamic OEM Table Load:
    [ 0.733087] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.733226] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.733586] ACPI: Dynamic OEM Table Load:
    [ 0.733588] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.757289] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.757699] ACPI: Dynamic OEM Table Load:
    [ 0.757701] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.767184] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.767569] ACPI: Dynamic OEM Table Load:
    [ 0.767571] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.827076] ACPI: Interpreter enabled
    [ 0.827091] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.827097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.827117] ACPI: (supports S0 S3 S4 S5)
    [ 0.827119] ACPI: Using IOAPIC for interrupt routing
    [ 0.827154] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.827263] ACPI: No dock devices found.
    [ 1.461183] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
    [ 1.461215] \_SB_.PCI0:_OSC invalid UUID
    [ 1.461216] _OSC request data:1 8 0
    [ 1.461245] \_SB_.PCI0:_OSC invalid UUID
    [ 1.461246] _OSC request data:1 1f 0
    [ 1.461249] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.461251] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.461907] PCI host bridge to bus 0000:00
    [ 1.461911] pci_bus 0000:00: root bus resource [bus 00-7e]
    [ 1.461912] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.461914] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.461915] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.461917] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
    [ 1.461925] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
    [ 1.461941] DMAR: Disabling batched IOTLB flush on Ironlake
    [ 1.462003] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
    [ 1.462034] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.462069] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.462102] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
    [ 1.462112] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 1.462118] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.462122] pci 0000:00:02.0: reg 0x20: [io 0x5050-0x5057]
    [ 1.462225] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 1.462253] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
    [ 1.462346] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.462430] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 1.462844] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
    [ 1.465285] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.465342] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.465384] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 1.465404] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
    [ 1.465500] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.465545] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.465580] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 1.465677] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.465723] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.465756] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 1.465853] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.465899] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.465946] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 1.466360] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
    [ 1.468800] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.468856] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.468891] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 1.468992] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 1.469026] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
    [ 1.469192] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
    [ 1.469218] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
    [ 1.469229] pci 0000:00:1f.2: reg 0x14: [io 0x505c-0x505f]
    [ 1.469239] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
    [ 1.469250] pci 0000:00:1f.2: reg 0x1c: [io 0x5058-0x505b]
    [ 1.469261] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
    [ 1.469272] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
    [ 1.469336] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.469405] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 1.469425] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
    [ 1.469455] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
    [ 1.469543] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
    [ 1.469570] pci 0000:00:1f.6: reg 0x10: [mem 0xc4507000-0xc4507fff 64bit]
    [ 1.469761] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
    [ 1.469775] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.469785] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
    [ 1.469792] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
    [ 1.469803] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    [ 1.469840] pci 0000:01:00.0: supports D1 D2
    [ 1.469884] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
    [ 1.469899] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
    [ 1.469966] pci 0000:01:00.1: supports D1 D2
    [ 1.470024] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.470027] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.470029] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.470032] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.470151] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
    [ 1.470195] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
    [ 1.470407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.480075] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.480083] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.480090] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.480101] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.480205] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.480221] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.480247] pci 0000:03:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit pref]
    [ 1.480264] pci 0000:03:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
    [ 1.480276] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 1.480339] pci 0000:03:00.0: supports D1 D2
    [ 1.480340] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.480382] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 1.490020] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.490028] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.490035] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.490046] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.490160] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    [ 1.490173] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.490174] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.490176] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.490177] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
    [ 1.490618] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.490666] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.490712] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.490761] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.490808] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.490854] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.490902] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.490948] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.693626] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
    [ 1.693629] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.693631] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.693691] PCI host bridge to bus 0000:7f
    [ 1.693694] pci_bus 0000:7f: root bus resource [bus 7f]
    [ 1.693698] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
    [ 1.693735] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
    [ 1.693774] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
    [ 1.693808] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
    [ 1.693841] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
    [ 1.693875] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
    [ 1.694220] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 1.694226] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.694261] ACPI: \_SB_.CPBG: notify handler is installed
    [ 1.694272] Found 2 acpi root devices
    [ 1.694307] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 1.694393] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.694397] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.694399] vgaarb: loaded
    [ 1.694400] vgaarb: bridge control possible 0000:01:00.0
    [ 1.694401] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.694436] PCI: Using ACPI for IRQ routing
    [ 1.699238] PCI: pci_cache_line_size set to 64 bytes
    [ 1.699337] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 1.699339] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
    [ 1.699340] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
    [ 1.699428] NetLabel: Initializing
    [ 1.699429] NetLabel: domain hash size = 128
    [ 1.699430] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.699443] NetLabel: unlabeled traffic allowed by default
    [ 1.699467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.699472] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.701500] Switched to clocksource hpet
    [ 1.705449] pnp: PnP ACPI init
    [ 1.705466] ACPI: bus type PNP registered
    [ 1.705591] pnp 00:00: [dma 4]
    [ 1.705621] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.705641] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.705757] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.705791] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.705846] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 1.705848] system 00:04: [io 0x0800-0x080f] has been reserved
    [ 1.705850] system 00:04: [io 0xffff] has been reserved
    [ 1.705852] system 00:04: [io 0xffff] has been reserved
    [ 1.705853] system 00:04: [io 0x0400-0x047f] could not be reserved
    [ 1.705855] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.705857] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 1.705858] system 00:04: [io 0x0380-0x038e] has been reserved
    [ 1.705861] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.705887] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.705918] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.705955] pnp 00:07: Plug and Play ACPI device, IDs SYN1e1d SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.706069] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.706268] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.706270] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.706272] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.706274] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.706275] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
    [ 1.706277] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.706281] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.706283] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.706285] system 00:09: [mem 0xc4600000-0xc4600fff] has been reserved
    [ 1.706287] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.905114] pnp: PnP ACPI: found 10 devices
    [ 1.905115] ACPI: bus type PNP unregistered
    [ 1.911635] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 1.911639] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 1.911677] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
    [ 1.911680] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.911682] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.911685] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
    [ 1.911687] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.911691] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.911694] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 1.911699] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
    [ 1.911704] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.911711] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1410000-0xc141ffff pref]
    [ 1.911713] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 1.911716] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    [ 1.911721] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
    [ 1.911726] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.911733] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 1.911747] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.911749] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.911750] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.911752] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.911753] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.911755] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
    [ 1.911756] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.911758] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 1.911760] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
    [ 1.911761] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
    [ 1.911763] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 1.911764] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
    [ 1.911766] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
    [ 1.911767] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 1.911769] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 1.911770] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.911772] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
    [ 1.911805] NET: Registered protocol family 2
    [ 1.912015] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.912263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.912459] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.912493] TCP: reno registered
    [ 1.912506] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.912542] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.912641] NET: Registered protocol family 1
    [ 1.912657] pci 0000:00:02.0: Boot video device
    [ 1.938251] PCI: CLS 64 bytes, default 64
    [ 1.938297] Unpacking initramfs...
    [ 1.987010] Freeing initrd memory: 2960K (ffff880037a28000 - ffff880037d0c000)
    [ 1.987017] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.987019] software IO TLB [mem 0x9763f000-0x9b63f000] (64MB) mapped at [ffff88009763f000-ffff88009b63efff]
    [ 1.987050] Simple Boot Flag at 0x44 set to 0x1
    [ 1.987234] Scanning for low memory corruption every 60 seconds
    [ 1.987523] audit: initializing netlink socket (disabled)
    [ 1.987536] type=2000 audit(1390630458.423:1): initialized
    [ 1.998005] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.999257] zbud: loaded
    [ 1.999421] VFS: Disk quotas dquot_6.5.2
    [ 1.999457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.999614] msgmni has been set to 15569
    [ 1.999955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.000004] io scheduler noop registered
    [ 2.000006] io scheduler deadline registered
    [ 2.000029] io scheduler cfq registered (default)
    [ 2.000219] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 2.000474] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.000487] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.000526] vesafb: mode is 1600x900x32, linelength=6400, pages=0
    [ 2.000528] vesafb: scrolling: redraw
    [ 2.000529] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.000872] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90008f00000, using 5632k, total 5632k
    [ 2.208493] Console: switching to colour frame buffer device 200x56
    [ 2.415572] fb0: VESA VGA frame buffer device
    [ 2.415583] intel_idle: MWAIT substates: 0x1120
    [ 2.415585] intel_idle: v0.4 model 0x25
    [ 2.415585] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.415721] GHES: HEST is not enabled!
    [ 2.415778] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.416220] Linux agpgart interface v0.103
    [ 2.416282] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.437802] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.437825] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.437928] mousedev: PS/2 mouse device common for all mice
    [ 2.439572] rtc_cmos 00:05: RTC can wake from S4
    [ 2.439720] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.439752] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.439804] drop_monitor: Initializing network drop monitor service
    [ 2.439867] TCP: cubic registered
    [ 2.439942] NET: Registered protocol family 10
    [ 2.440100] NET: Registered protocol family 17
    [ 2.440110] Key type dns_resolver registered
    [ 2.440362] registered taskstats version 1
    [ 2.441127] Magic number: 14:648:216
    [ 2.441252] rtc_cmos 00:05: setting system clock to 2014-01-25 06:14:19 UTC (1390630459)
    [ 2.441297] PM: Hibernation image not present or could not be loaded.
    [ 2.442333] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 2.442335] Write protecting the kernel read-only data: 8192k
    [ 2.444650] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
    [ 2.445600] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 2.458198] systemd-udevd[57]: starting version 208
    [ 2.466960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.485606] SCSI subsystem initialized
    [ 2.487357] ACPI: bus type USB registered
    [ 2.487410] usbcore: registered new interface driver usbfs
    [ 2.487487] libata version 3.00 loaded.
    [ 2.487522] usbcore: registered new interface driver hub
    [ 2.487576] usbcore: registered new device driver usb
    [ 2.488154] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.488305] ehci-pci: EHCI PCI platform driver
    [ 2.488453] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.488473] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.488484] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.488507] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.492709] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.492734] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
    [ 2.501178] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.501456] hub 1-0:1.0: USB hub found
    [ 2.501468] hub 1-0:1.0: 3 ports detected
    [ 2.501772] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.501779] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.501786] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.501801] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.505713] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.505733] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc4509000
    [ 2.514513] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.514735] hub 2-0:1.0: USB hub found
    [ 2.514741] hub 2-0:1.0: 3 ports detected
    [ 2.514993] ahci 0000:00:1f.2: version 3.0
    [ 2.515120] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.515225] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 2.515229] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
    [ 2.515236] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.535192] scsi0 : ahci
    [ 2.535558] scsi1 : ahci
    [ 2.535764] scsi2 : ahci
    [ 2.535955] scsi3 : ahci
    [ 2.536149] scsi4 : ahci
    [ 2.536359] scsi5 : ahci
    [ 2.536451] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 41
    [ 2.536457] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 41
    [ 2.536459] ata3: DUMMY
    [ 2.536462] ata4: DUMMY
    [ 2.536467] ata5: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508300 irq 41
    [ 2.536471] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 41
    [ 2.807839] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.854462] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.854564] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.854611] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.854735] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.856919] ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
    [ 2.859217] ata2.00: configured for UDMA/100
    [ 2.861881] ata1.00: ATA-8: Corsair CSSD-F60GB2, 2.0, max UDMA/133
    [ 2.861886] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.871886] ata1.00: configured for UDMA/133
    [ 2.872196] scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F60 2.0 PQ: 0 ANSI: 5
    [ 2.873244] scsi 1:0:0:0: CD-ROM hp BD ROM BC-5501H 2.90 PQ: 0 ANSI: 5
    [ 2.903929] ata5.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
    [ 2.903933] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.905148] ata5.00: configured for UDMA/100
    [ 2.905285] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
    [ 2.909966] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
    [ 2.910041] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.910048] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.910091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.910499] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.910501] sd 4:0:0:0: [sdb] 4096-byte physical blocks
    [ 2.910526] sd 4:0:0:0: [sdb] Write Protect is off
    [ 2.910528] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.910540] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.910633] sda: sda1 sda2 sda3 sda4
    [ 2.911010] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.911016] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.911095] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.911204] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.932118] hub 1-1:1.0: USB hub found
    [ 2.932226] hub 1-1:1.0: 6 ports detected
    [ 2.953159] sdb: sdb1 sdb3
    [ 2.953757] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 2.987624] tsc: Refined TSC clocksource calibration: 2527.285 MHz
    [ 3.037677] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 3.161529] hub 2-1:1.0: USB hub found
    [ 3.161615] hub 2-1:1.0: 8 ports detected
    [ 3.241106] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
    [ 3.333324] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.336248] usbcore: registered new interface driver usbhid
    [ 3.336250] usbhid: USB HID core driver
    [ 3.336850] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
    [ 3.337086] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.2/input0
    [ 3.397519] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
    [ 3.486816] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.546180] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.548701] systemd[1]: Set hostname to <HP-DV7>.
    [ 3.553751] systemd-fstab-generator[119]: Mount point swap is not a valid path, ignoring.
    [ 3.564291] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
    [ 3.601149] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 3.601160] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 3.601361] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.601419] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.601433] systemd[1]: Starting Remote File Systems.
    [ 3.602633] systemd[1]: Reached target Remote File Systems.
    [ 3.602645] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.604045] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.604055] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.605524] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.605534] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.606751] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.606760] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.608067] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.608103] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.610164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.610180] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.610209] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.610218] systemd[1]: Starting Paths.
    [ 3.611135] systemd[1]: Reached target Paths.
    [ 3.611150] systemd[1]: Starting udev Kernel Socket.
    [ 3.612271] systemd[1]: Listening on udev Kernel Socket.
    [ 3.612284] systemd[1]: Starting udev Control Socket.
    [ 3.613423] systemd[1]: Listening on udev Control Socket.
    [ 3.613435] systemd[1]: Starting Journal Socket.
    [ 3.614518] systemd[1]: Listening on Journal Socket.
    [ 3.614535] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.616439] systemd[1]: Starting Apply Kernel Variables...
    [ 3.617780] systemd[1]: Mounting Huge Pages File System...
    [ 3.619103] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.622065] systemd[1]: Starting Load Kernel Modules...
    [ 3.626618] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.629265] systemd[1]: Starting Set Up Additional Binary Formats...
    [ 3.630812] systemd[1]: Starting Journal Service...
    [ 3.633257] systemd[1]: Started Journal Service.
    [ 3.643151] systemd-journald[134]: Vacuuming done, freed 0 bytes
    [ 3.643416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 3.643422] ACPI: Power Button [PWRB]
    [ 3.643483] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 3.643552] EXT4-fs (sda4): re-mounted. Opts: discard
    [ 3.643855] ACPI: Lid Switch [LID0]
    [ 3.643927] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 3.643930] ACPI: Power Button [PWRF]
    [ 3.644676] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 3.644679] AMD IOMMUv2 functionality not available on this system
    [ 3.705533] systemd-udevd[157]: starting version 208
    [ 3.714133] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
    [ 3.723418] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 3.723419] Disabling lock debugging due to kernel taint
    [ 3.734452] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7558 MBytes.
    [ 3.734648] <6>[fglrx] vendor: 1002 device: 68c1 count: 1
    [ 3.734918] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
    [ 3.734926] pci 0000:01:00.0: enabling device (0000 -> 0003)
    [ 3.735095] <6>[fglrx] Kernel PAT support is enabled
    [ 3.735114] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
    [ 3.783368] ACPI: Requesting acpi_cpufreq
    [ 3.784868] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 3.785719] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
    [ 3.785798] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 3.786504] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 3.786902] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 3.787185] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 3.787188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787192] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787195] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787198] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787198] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787200] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787203] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787205] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787206] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787208] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.787210] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SGGP 2 (20130725/utaddress-251)
    [ 3.787213] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.P0P3.PEGP.GPIO 3 (20130725/utaddress-251)
    [ 3.787213] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.787214] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 3.788226] mei_me 0000:00:16.0: setting latency timer to 64
    [ 3.788279] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
    [ 3.803478] hp_accel: hardware type DV7 found
    [ 3.804108] lis3lv02d: 8 bits sensor found
    [ 3.806403] [drm] Initialized drm 1.1.0 20060810
    [ 3.817825] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 3.820698] usb-storage 2-1.1:1.0: USB Mass Storage device detected
    [ 3.821478] scsi6 : usb-storage 2-1.1:1.0
    [ 3.822190] usbcore: registered new interface driver usb-storage
    [ 3.836293] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
    [ 3.840807] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
    [ 3.842785] [Firmware Bug]: Invalid critical threshold (0)
    [ 3.848265] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 3.848278] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.848284] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
    [ 3.848512] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 3.848684] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90000c4e000, 78:ac:c0:41:2a:dc, XID 083000c0 IRQ 44
    [ 3.848685] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 3.848994] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.848996] ACPI: Thermal Zone [TZ01] (60 C)
    [ 3.854926] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 3.855035] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 3.855410] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 3.855479] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
    [ 3.856762] [drm] Memory usable by graphics device = 2048M
    [ 3.856877] checking generic (b0000000 580000) vs hw (b0000000 10000000)
    [ 3.856906] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 3.861908] cfg80211: Calling CRDA to update world regulatory domain
    [ 3.867315] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
    [ 3.872505] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 3.873734] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 3.873734] Copyright(c) 2003-2013 Intel Corporation
    [ 3.873811] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 3.875297] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.875446] iwlwifi 0000:02:00.0: irq 46 for MSI/MSI-X
    [ 3.879450] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
    [ 3.879788] Bluetooth: Core ver 2.16
    [ 3.881003] NET: Registered protocol family 31
    [ 3.881005] Bluetooth: HCI device and connection manager initialized
    [ 3.881016] Bluetooth: HCI socket layer initialized
    [ 3.881019] Bluetooth: L2CAP socket layer initialized
    [ 3.881026] Bluetooth: SCO socket layer initialized
    [ 3.883938] usbcore: registered new interface driver btusb
    [ 3.884347] Console: switching to colour dummy device 80x25
    [ 3.886414] i915 0000:00:02.0: setting latency timer to 64
    [ 3.892348] ACPI: AC Adapter [ACAD] (on-line)
    [ 3.906181] systemd-journald[134]: Received request to flush runtime journal from PID 1
    [ 3.910134] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 3.910140] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 3.910142] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 3.910145] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 3.910257] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 3.930630] i915 0000:00:02.0: irq 47 for MSI/MSI-X
    [ 3.930654] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 3.930656] [drm] Driver supports precise vblank timestamp query.
    [ 3.931084] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.934147] input: PC Speaker as /devices/platform/pcspkr/input/input11
    [ 3.936986] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 3.950834] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
    [ 3.966690] fbcon: inteldrmfb (fb0) is primary device
    [ 3.987780] Switched to clocksource tsc
    [ 3.996141] iTCO_vendor_support: vendor-support=0
    [ 3.996902] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 3.996972] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 3.997186] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.022206] systemd-udevd[171]: renamed network interface eth0 to enp3s0
    [ 4.023553] cfg80211: World regulatory domain updated:
    [ 4.023554] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 4.023555] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.023556] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 4.023557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
    [ 4.023558] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.023558] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
    [ 4.023559] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
    [ 4.080995] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
    [ 4.098822] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
    [ 4.099319] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
    [ 4.099803] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.100209] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.100361] wmi: Mapper loaded
    [ 4.103136] input: HP WMI hotkeys as /devices/virtual/input/input13
    [ 4.104748] systemd-udevd[164]: renamed network interface wlan0 to wlo1
    [ 4.125347] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 4.240631] media: Linux media interface: v0.10
    [ 4.244154] Linux video capture interface: v2.00
    [ 4.252000] uvcvideo: Found UVC 1.00 device HP Webcam (064e:f209)
    [ 4.257341] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14
    [ 4.257488] usbcore: registered new interface driver uvcvideo
    [ 4.257489] USB Video Class driver (1.1.1)
    [ 4.770357] Console: switching to colour frame buffer device 200x56
    [ 4.778627] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 4.778629] i915 0000:00:02.0: registered panic notifier
    [ 4.785739] acpi device:02: registered as cooling_device5
    [ 4.785956] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 4.786022] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15
    [ 4.797354] acpi device:14: registered as cooling_device6
    [ 4.802976] acpi device:15: registered as cooling_device7
    [ 4.803025] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 4.803087] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/LNXVIDEO:02/input/input16
    [ 4.803440] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 4.803977] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 4.805256] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 4.805400] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 4.805408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.824848] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5
    [ 4.827187] sd 6:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 4.828646] sd 6:0:0:0: [sdc] Write Protect is off
    [ 4.828651] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
    [ 4.830784] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 4.839857] sdc: sdc1
    [ 4.843514] sd 6:0:0:0: [sdc] Attached SCSI removable disk
    [ 4.894625] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.902120] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.937012] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4.944514] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
    [ 4.978524] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 5.038118] r8169 0000:03:00.0 enp3s0: link down
    [ 5.038174] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 5.376682] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    [ 5.470179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 5.851763] wlo1: authenticate with 04:a1:51:18:3f:5a
    [ 5.865752] wlo1: send auth to 04:a1:51:18:3f:5a (try 1/3)
    [ 5.868512] wlo1: authenticated
    [ 5.869715] wlo1: associate with 04:a1:51:18:3f:5a (try 1/3)
    [ 5.873551] wlo1: RX AssocResp from 04:a1:51:18:3f:5a (capab=0x411 status=0 aid=2)
    [ 5.876272] wlo1: associated
    [ 5.876327] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
    [ 38.341494] fuse init (API version 7.22)
    Xorg.0.log
    [ 20.932]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 20.932] X Protocol Version 11, Revision 0
    [ 20.932] Build Operating System: Linux 3.12.6-1-ARCH x86_64
    [ 20.932] Current Operating System: Linux HP-DV7 3.12.8-1-ARCH #1 SMP PREEMPT Thu Jan 16 09:16:34 CET 2014 x86_64
    [ 20.932] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a303086c-e564-4347-92f1-8ec5ecbdcf85 rw
    [ 20.932] Build Date: 08 January 2014 01:35:51PM
    [ 20.932]
    [ 20.932] Current version of pixman: 0.32.4
    [ 20.932] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 20.932] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 20.932] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 25 01:16:07 2014
    [ 20.935] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 20.938] (==) No Layout section. Using the first Screen section.
    [ 20.938] (==) No screen section available. Using defaults.
    [ 20.938] (**) |-->Screen "Default Screen Section" (0)
    [ 20.938] (**) | |-->Monitor "<default monitor>"
    [ 20.938] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 20.938] (**) | |-->Device "Intel Graphics"
    [ 20.938] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 20.938] (==) Automatically adding devices
    [ 20.938] (==) Automatically enabling devices
    [ 20.938] (==) Automatically adding GPU devices
    [ 20.947] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 20.947] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
    [ 20.947] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 20.947] (II) Loader magic: 0x7fac20
    [ 20.947] (II) Module ABI versions:
    [ 20.947] X.Org ANSI C Emulation: 0.4
    [ 20.947] X.Org Video Driver: 14.1
    [ 20.947] X.Org XInput driver : 19.1
    [ 20.947] X.Org Server Extension : 7.0
    [ 20.947] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 20.948] (--) PCI:*(0:0:2:0) 8086:0046:103c:144b rev 2, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005050/8
    [ 20.949] (--) PCI: (0:1:0:0) 1002:68c1:103c:144b rev 0, Mem @ 0xa0000000/268435456, 0xc4400000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
    [ 20.949] Initializing built-in extension Generic Event Extension
    [ 20.949] Initializing built-in extension SHAPE
    [ 20.949] Initializing built-in extension MIT-SHM
    [ 20.949] Initializing built-in extension XInputExtension
    [ 20.949] Initializing built-in extension XTEST
    [ 20.949] Initializing built-in extension BIG-REQUESTS
    [ 20.949] Initializing built-in extension SYNC
    [ 20.949] Initializing built-in extension XKEYBOARD
    [ 20.949] Initializing built-in extension XC-MISC
    [ 20.949] Initializing built-in extension SECURITY
    [ 20.949] Initializing built-in extension XINERAMA
    [ 20.949] Initializing built-in extension XFIXES
    [ 20.949] Initializing built-in extension RENDER
    [ 20.949] Initializing built-in extension RANDR
    [ 20.949] Initializing built-in extension COMPOSITE
    [ 20.949] Initializing built-in extension DAMAGE
    [ 20.949] Initializing built-in extension MIT-SCREEN-SAVER
    [ 20.950] Initializing built-in extension DOUBLE-BUFFER
    [ 20.950] Initializing built-in extension RECORD
    [ 20.950] Initializing built-in extension DPMS
    [ 20.950] Initializing built-in extension X-Resource
    [ 20.950] Initializing built-in extension XVideo
    [ 20.950] Initializing built-in extension XVideo-MotionCompensation
    [ 20.950] Initializing built-in extension XFree86-VidModeExtension
    [ 20.950] Initializing built-in extension XFree86-DGA
    [ 20.950] Initializing built-in extension XFree86-DRI
    [ 20.950] Initializing built-in extension DRI2
    [ 20.950] (II) LoadModule: "glx"
    [ 20.951] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
    [ 20.954] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 20.954] compiled for 6.9.0, module version = 1.0.0
    [ 20.954] Loading extension GLX
    [ 20.954] (II) LoadModule: "intel"
    [ 20.955] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 20.959] (II) Module intel: vendor="X.Org Foundation"
    [ 20.959] compiled for 1.14.2, module version = 2.21.15
    [ 20.959] Module class: X.Org Video Driver
    [ 20.959] ABI class: X.Org Video Driver, version 14.1
    [ 20.959] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
    [ 20.960] (++) using VT number 1
    [ 20.963] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 20.963] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 20.963] (==) intel(0): RGB weight 888
    [ 20.963] (==) intel(0): Default visual is TrueColor
    [ 20.963] (**) intel(0): Option "AccelMethod" "sna"
    [ 20.964] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
    [ 20.964] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
    [ 20.964] (**) intel(0): Framebuffer tiled
    [ 20.964] (**) intel(0): Pixmaps tiled
    [ 20.964] (**) intel(0): "Tear free" disabled
    [ 20.964] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 20.964] (II) intel(0): Output LVDS1 has no monitor section
    [ 20.965] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 20.965] (II) intel(0): Output VGA1 has no monitor section
    [ 20.965] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
    [ 20.965] (==) intel(0): DPI set to (96, 96)
    [ 20.965] (II) Loading sub module "dri2"
    [ 20.965] (II) LoadModule: "dri2"
    [ 20.965] (II) Module "dri2" already built-in
    [ 20.965] (==) Depth 24 pixmap format is 32 bpp
    [ 20.969] (II) intel(0): SNA initialized with Ironlake (gen5) backend
    [ 20.969] (==) intel(0): Backing store disabled
    [ 20.969] (==) intel(0): Silken mouse enabled
    [ 20.969] (II) intel(0): HW Cursor enabled
    [ 20.969] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 20.972] (==) intel(0): DPMS enabled
    [ 20.972] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 20.972] (II) intel(0): [DRI2] Setup complete
    [ 20.972] (II) intel(0): [DRI2] DRI driver: i965
    [ 20.972] (II) intel(0): direct rendering: DRI2 Enabled
    [ 20.972] (==) intel(0): hotplug detection: "enabled"
    [ 20.972] (--) RandR disabled
    [ 20.984] (EE) GLX error: Can not get required symbols.
    [ 20.996] (II) intel(0): switch to mode [email protected] on pipe 0 using LVDS1, position (0, 0), rotation normal
    [ 21.006] (II) intel(0): Setting screen physical size to 423 x 238
    [ 21.139] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 21.139] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 21.139] (II) LoadModule: "evdev"
    [ 21.140] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 21.141] (II) Module evdev: vendor="X.Org Foundation"
    [ 21.141] compiled for 1.14.3, module version = 2.8.2
    [ 21.141] Module class: X.Org XInput Driver
    [ 21.141] ABI class: X.Org XInput driver, version 19.1
    [ 21.141] (II) Using input driver 'evdev' for 'Power Button'
    [ 21.141] (**) Po

  • Solution of dv6-3040ee and 8.1 with vCards Amd mobility radeon HD 5000s and Intel HD Graphics

    With my windows 8.1
    If I setup the two vCards Amd mobility radeon HD 5000s and Intel HD Graphics
    the windows can't open unless I uninstalled one of them
    but I need a solution allow me adjust brighness that not found in AMD card but found in Intel vCard
    and the most of games Intel can run it but AMD can
    Help !!
    Now I'm installing The two cards but if i restarted my laptop it wouldn't run
    The photo show that ...
    http://www3.0zz0.com/2015/04/07/21/289209638.png

    Hi there @ZezoOo 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are looking for help with your video drivers for the adapters in your notebook. Unfortunately, after doing some searching, it appears that Windows 8.1 is not a supported operating system for this notebook. HP customized drivers are only available for the Windows 7 operating system.
    Please see the following, for some guidance.  HP Products - What If I Don't See My Operating System?
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Cant find driver for graphics AMD Radeon 6600M and 6700M series / Intel(R) Graphics 3000

    my graphic drivers doesnt work so my screen in stretched and wide then the usual. My hp assitant recommades the following two graphics drivers 
    AMD Radeon 6600M and 6700M series
    version: 14.501.1003.0
    Intel(R) Graphics 3000
    version: 9.17.10.2932
    cant any one help me reconfiguer my screen
    HP Envy 14  

    Hi:
    What is the full model number of your Envy 14 notebook and what operating system are you running on it?

  • Fresh windows 7 install for u400 wont take AMD graphics drivers

    So I did a fresh install of windows 7 and I stupidly deleted the D: partitions which included the drivers. So now i resort to getting my drivers from the consumersupport website and it's giving me trouble. 
    Whenever i download the amd drivers and i restart for the drivers to take effect, i get BSOD. All the other drivers and even hot fixes work perfectly, it's just there is an incompatibility with the amd driver, according to customer service.
    Any one had the same issue? if so, where did you download ur drivers to fix this issue?
    In my opinion, it has something to do with switchable graphics... I don't know if it's possible, but i think i'm installing the driver software onto the intel onboard graphics.
    Any help would be appreciated.

    I had the same problem, and after a day of reloading windows 7 Ultimate and drivers in a different order, I decided to just do a "custom" install, and only install the "video card driver" option, and unchecked everything else.  After loading the rest of the drivers from the Lenovo Support site, everything works perfectly...and this was after I installed a 512GB Samsung SSD.  So, long story short, just do a custom install of the AMD driver, and just load the video card driver...not the CCC.

  • Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

    Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

    The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

  • I need updated drivers for Intel HD Graphics 4000

    Hi,
    this is the laptop:
    SATELLITE L50-A-170
    PSKJNE-03L00MIT
    Microsoft Windows 8.1  6.3.9600 (64bit)
    I need the last drivers for Intel HD Graphics 4000, 64-bit version 15.33.32.64.4061 (10.18.10.4061).
    I downloaded the driver but I can't install because:
    "The driver being installed is not valid for this computer. Please obtain the appropriate driver from the computer manufacturer Setup will exit"
    ...but in your support page the last version is 10.18.10.3308.
    What can I do?
    Solved!
    Go to Solution.
    Attachments:
    dati laptop.txt ‏10 KB

    Try this workaround.
       How to Manually Install a Driver in Microsoft Windows 8* or Windows 8.1*
    -Jerry

  • Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: 140735120521568 GPUManager 2 Sniffer Result Code: 3 Help

    Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: <140735120521568> <GPUManager> <2> Sniffer Result Code: 3.  I have trashed the CUDA program and reinstalled Premiere and AE but no joy.  Same message followed by another error box with options to Retry, Send to Apple or ignore.  I have tried all 3 options but nothing works!  Every time I launch either program same message appears.

    Hi? today i too have this problem.
    I found a solution here: https://discussions.apple.com/message/25137524#25137524
    Now all good.
    Good luck!

Maybe you are looking for

  • Putting iMac to sleep with more than one user logged on

    Hi, Our family shares the iMca with an account for each member. They all leave them looged on all the time and we switch between each. I want to force th eiMac to sleep between mifnight and 6 AM to save power. When I set this up in Energy Save settin

  • Error in manual database creation in 10g for windows.

    hi, i have planned to create database manually in window command prompt by the following steps but i m getting this error, so guys provide me some idea to create db. D:\oracle\product\10.1.0\Db_1>set oracle_sid=god; D:\oracle\product\10.1.0\Db_1>orad

  • Data recover from a hard drive error 301

    Can anyone advise me of how to recover data from a hard drive error 301.  I have a pavilion dv7-4177 and i received the hard drive error code 301 two weeks after the warranty expired. I back up my data so I though but when tried to reload that data o

  • IOs 4.2.1 from 4.2 on Ipod Touch 2nd Gen my car wont read my ipod

    I just updated the 4.2.1 update on my ipod touch 2nd gen. I recently had the 4.2 update and it worked perfectly with my car. Now my car wont read it. I am trying to downgrade to any other ios in order to listen to my podcast. All the options online a

  • Exporting an iphoto slideshow to play in itunes

    I want to export a slideshow from iphoto to itunes so i can sync it with my iphone. I know it can be done, i did one 6 months ago to put it on my ipod, but i can remember how i did it. I know it has to be in the .m4v format please help!