Intel and CS2

I am having a problem installing a legit copy of Adobe CS2 on my iMac. The installation seems to run very fast (too fast), but when I go into my applications folder, no adobe apps can be found. I have tried running the installer multiple times and have managed to correctly install bridge and photoshop once, but nothing else. I am sure it is a full version and that it is a mac version. any help would be appreciated.
thank you

Same problem when I called Apple, I had to ask for a level 2 tech right away since the first person had no idea what I was talking about when I said I wanted to uninstall the recent 2006-003 update and her accent was very difficult to understand since I have a slight hearing problem.
Anyways, I am new to Mac computers, I am a long time Windows and Unix Admin, and multiple flavors of Linux for certain services. We were told we had to buy these Imac machines because we were bought out and the new company said we had to use macs, because everyon that does printing uses macs, I begged not to get the intels because of having to use Rosetta, but they would not listen, I almost quit over the ordeal since I was basically threatened and told to keep my mouth shut.
Regardless of all that, I am the one working countless overtime to get these Imacs working again. I ran into the problem when I did the 2006-003 security update. I tried an archive install which would not even finish, kept hanging on iweb. So I did an erase install, then installed Indesign CS2, and did not install the version cue, since I was already aware this was a problem. I then started updates one at a time, and tried created a PDF after a restart after each install. I did the quicktime install 7.1 first, worked no problem, and could make PDF's still, I did the 10.4.6 update and rebooted tried to make a pdf with acrobat and system hung. Restart in safe mode and remove the cache from library\caches\ and then reboot and as soon as I open acrobat the system hangs. Everytime I remove the cache I can then reboot normally until I open Acrobat.
I have noticed in my short time with Apple, that when something does not work, all I hear is that "well that isnt our problem, you should call adobe" or whoever the other program is. The plain simple fact, is that adobe is not the only program having problems, apple remote desktop is also having problems, and safari, and others, just search the message boards and you will see, but Apple refuses to resolve the issue, but if you dont install the update, then your system is open to security problems.
The fact that I can not just uninstall a secuirty update is unbeleiveable. The Apple level 2 tech told me that MOST updates including all security updates could not be uninstalled, you either had to archive or erase install the system to go back.
I think the Apple OS is great, but they should test products with their largest vender, Apple before putting out these intel Imacs, or security updates that cause problems. If Windows did this, Man everyone would blame Microsoft right away, but if it is apple, you end up with a apple community that is so defensive they will just say, well its not our fault its the program. Well guess what, a system without any programs is not very useful.
This whole mindset that I get from the other plants that windows crashes and I hear them joke about the blue screen of death and garbage like that is rediculus. I havent seen a blue screen since windows 98, until after the apple update that gave me the blue screen, and all the talk about how insecure the windows machines are. They are only insecure if an admin doesnt do his job. If he allows users to be administrators or doesnt do any updates for 6 months. I have numerous windows machines on this network and they run flawless, no virus, no spyware, no problems. 5 Windows servers, and 25 linux boxes running as thin clients booting to a windows XP remote desktop. I have had to tell people how to restart their computer since they forget and leave them running constantly, of course, I network boot them and restart for needed updates, but they forget how, because XP is solid.
So, sorry for the rant, but basically this is not acceptable for Apple. They need to fix their product and take responsiblity for problems, if they want to gain market shares above what they have, they will run into the same problems as microsoft, and they will be forced to make there machines run with certain required programs.
So, does anyone have a fix for this problem, besides dont use acrobat or dont install updates?

Similar Messages

  • IMac Intel and CS2 using RAW

    Does anyone have problems working with RAW images on CS2 and the iMac Intel machine?
    Everytime I try to convert an image from RAW to TIFF ( in Bridge ) and then open in CS2 I get a window saying that it cannot open due to an error.
    Any help or comment is welcome.
    Thanks
    Pedro

    Problem solved.
    I re-installed Photoshop CS2 and the problem is gone.
    Why it didn't work the first time, I don't know, although after finishing the installation it showed a window saying that the installation was successful....
    Pedro

  • I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues.  I am not familiar with macs as this is my home computer used by other family members.  Any help on how to troubleshoot why such latency issues?

    I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues.  I am not familiar with macs as this is my home computer used by other family members.  Any help on how to troubleshoot why such latency issues?

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • HP Envy 15 Graphics Problem with Windows 8.1 (Intel and NVidia Graphics). Help!

    I bought an HP ENVY TouchSmart 15-j013ea about 6 months ago and I have had a major problem with the graphics that I cannot seem to solve. I think it started when I updated to Windows 8.1, even though I am not 100% certain.
    I have noticed the following three problems, and I think they are related:
    Some windows (such as Chrome, Skype, or even Device Manager or other windows) are very blurry compared to others.
    The firefox menu window has some deformed black arrows instead of the normal ones.
    When playing a game (specifically, Star Wars the Force Unleashed 2), after a while I get an error that the computer has ran out of memory. However, according to task manager, only about 50% is in use, not to mention that I have 8 GB of RAM + 2 GB graphics memory. At the same time, the computer gets rather loud (like a fan working overtime) and hot.
    The laptop has both Intel and NVidia graphics, and both are enabled in Device Manager. To be honest, I have no idea which is used when, or how to check that (let me know if there is a way)
    I have tried the following without success:
    Uninstalling the Intel graphics driver from device manager and installing a version I downloaded from the HP website for my laptop and OS. After that, Windows would NOT BOOT, and I had to do a system restore.
    Uninstalling the Intel graphics from Programs and Features, and installing 2 different versions from the Intel website. Nothing changed.
    Updating Nvidia driver through GeForce Experience. Nothing changed.
    Updating Intel drivers from Windows Update. Nothing changed.
    Quite frankly I am not sure what the problem could be, since the graphics versions are supposed to be compatible with WIndows 8.1. I also don't get why some windows are blurry and others are not. I am thinking the computer uses only the Intel graphics and not the Nvidia (at least in the blurry windows), but even if that was the case (and it shouldn't be), I don't think I should be having this problem.
    At this point, I really need help. My graphics details are:
    Intel HD Graphics 4600: Driver version: 10.18.10.3412
    NVidia GeForce GT 740M: Driver version: 335.23
    NVidia GeForce Experience version: 1.8.2
    I am attaching screenshots that show driver details and the problems.
    Thank you.
    Blurry Chrome:
    Firefox menu problem:
    Device Manager and driver windows are also blurry, both graphics are shown

    I had a similar problem with a Dell laptop.  I found the problem was the laptop wanted to switch between the Intel and NYIDIA video cards.  It would switch to the Intel when high graphics was not required then to the NIVIDIA when high graphics was required.  The laptop does this to save power when high graphics is not required but it caused problems with some applications, specifically high graphics games.
    For me the solution was to disable the Intel graphics processor.  You can do this by right clicking on your Wallpaper, select the NIVIDIA Control Panel, then select Set Physx Configuration.  You will see a dropdown box labeled Select Physx Processor.  It is set to Auto by default.  This allows the switching I described. Select this dropdown box and select your NIVIDIA processor.  This will prevent the laptop from switching and force it to use your NVIDIA processor exclusively.
    Hope this helps.
    Sacto Fred
    Owner and CEO
    H&O PC Soultions

  • Do I need to install  Mac OS X 10.4.8 Update (Intel) and firmware

    Hiya,
    I recently bought a new Macbook Pro,it is Mac OS X version 10.4.8, i am just wondering whether I need to install Mac OS X 10.4.8 Update (Intel)?
    I also tried to install MacBook Pro EFI Firmware Update 1.2, however it says the computer doesn't need to install it. And I checked my Boot ROM Version is MBP22.00A5.B00. After the update it should be: MBP11.0055.B08 (MacBook Pro 15 inch). So I don't know what to do?
    please help!
    Thanks.
    Catherine

    "Do I need to install Mac OS X 10.4.8 Update (Intel) and firmware"
    You don't "need" to install anything. If you think you can benefit from the updates then go ahead.
    "i am just wondering whether I need to install Mac OS X 10.4.8 Update (Intel)? "
    If it came with 10.4.8 preinstalled, then you do not need to install it.
    "So I don't know what to do?"
    Nothing. If it says the update isn't needed, then it's already been applied at the factory.

  • Intel and PowerPC Final Cut project compatibility

    I have two computers, a laptop and a desktop, that I use with Final Cut Studio. Both run PowerPC chips. If I purchase a new computer with the Intel chipset, will Final Cut projects be able to go back and forth between the Intel and PowerPC computers? I spend quite a bit of time editing on the road with my laptop then get back to the office and copy the project file over to my office computer. When going back on the road, I copy the project file from my office computer and put it back on my laptop so I can keep editing while traveling.
    Thanks!

    There is no compatibility issue between PowerPC and Intel as far as Final Cut Pro is concerned. You just have to make sure you have the same version of Final Cut on all machines, because older versions of Final Cut Pro will not open files created in newer versions. You don't have to worry about the processor.

  • CS1 and CS2 InDesign file type problems and Tiger

    Dual 2.7GHrz G5, 2GB RAM, OSX 10.4.5
    Previously, InDesign 3 (CS1 version) was installed on this Mac. I needed to install the full CS2 package. Everything installed just fine. The problem I am having is the file type associations. The Mac now sees CS1 InDesign files as Indesign CS2 files. I got info on a file I knew to have been created and saved in InDesign CS1. I changed the "open with:" to InDesign CS and it worked until I hit "Change all". It then reverts back to a CS2 file type. On other sites I found some different things to try like rebuilding or deleting the LaunchServices pref files, checking to see if their was a CFBundleIdentifier, etc. Anyway, what I seem to have found is that Tiger gets confused when the Type and Creator are the same in the info.plist files. Panther, however, does not seem to have this same problem. We have 10+ other G5's of similar hardware specs as the one listed above, running Panther 10.3.9, have CS1 and CS2 installed, and we are not having the same file type problems.
    As a test, I modified the CFBundleIdentifier to be different than the one found in the CS1 info.plist, and it let me "change all" the CS1 files to CS1. Of course, CS2 files could not be associated with CS2 now.
    Is there a fix for this? Or, is there a patch being worked on that will fix this problem? We really need to keep both versions of the software installed, and I don't want to have to rely on users making the decision about what version they are working in.
    Tom

    If Get Info shows both app versions (& it should) as "Open with:" choices, you can at least still set individual docs to open with the preferred version. Instead of having to open Get Info windows, you can do the same thing a bit more easily with the contextual menu that pops up when you right (or CMD) click & hold on a Finder document icon.
    Normally, the "Open with >" choice in this menu is a one time thing, but if you hold down the option key, it changes to "Always Open With >" & makes the new app choice permanent as it opens the doc, all in one step.

  • I have a IMac 7.1 Intel and trying to download vidoes to an Ipad version 5.1.1 - i keep getting error's stating that the ipad does not support this version - any suggestions?

    I have an Imac 7.1 intel and trying to download videos into an Ipad - I keep getting error messages that states not supported - any ideas?

    What is a 7.1 intel?

  • My new Canon MarkIII and CS2 are not compatible...

    Hi - I wish I could go into a camera shop or an Apple shop to get this sorted. But there are none where I live so I hope someone can help me. I have a legal version of CS2 and use a G5 mac. I'm a professional photographer and I want only to open my RAW pix in PS without converting via Digital Photo Professional or anything else. I never have my G5 hooked up to the internet and therefore have not imported latest versions of anything. I have tried an illegal CS3 and that cannot open my RAW files either so I am loathe to buy a legal version if it does not solve my problem. While I know both my camera and CS2 back to front I am not a computer geek. I have had a look through the forums but cannot find any answers. Chao and thanks. H

    Adobe doesn't offer "forever" support for new cameras, except for offering an ongoing update for their DNG converter. So, to get your canon raw files to open with CS2 you need to download the most recent version of ACR+DNG. See:
    http://www.adobe.com/products/dng/
    I cannot help too much, being more familiar with Windows, but the DNG converter does not need to be installed - it just simply works by pointing it at a folder of raw files.
    The version of CS3 you tried probably didn't install with the most recent version of ACR, which is why it didn't work with your Canon files. ACR v4 is much improved over v3 - you might consider CS3. Another option, for approximately the same price of upgrading to CS3, is Lightroom (v2 in beta test). It offers a slightly different approach to digital photography that includes a library (i.e., database approach as opposed to Bridge's "browser" approach).
    HTH :)

  • Can i purchase and CS2 upgrade, or do I have to buy new

    I have CS2 and need to upgrade to Maverick.  Can i purchase and CS2 upgrade, or do I have to buy new

    Adobe does not provide upgrades for CS2 applications, nor a special introductory offer for Creative Cloud Membership, unless you have at least CS3.
    If you also use Adobe Photoshop, InDesign or at least two other Adobe CC applications, you'd get an Adobe Creative Cloud Membership, which will cost U$49.99 a month.  .
    Alternatively if you only use Adobe Illustrator, you can get a single-app plan for U$19.99 a month.
    Both those prices are based on you locking in for an anual plan.
    For more information see: http://www.adobe.com/au/products/creativecloud/buying-guide.html
    Cari

  • Will quark 6 and cs2 work on snow leopard

    Want to update to 10.6.8. Will my old Quark 6 and CS2 still work?

    CS2 was working in 10.6.8 but now crashes hard (especially Indesign/Illustrator) as of latest updates. Can't reinstall it either. A wonder it had worked as long as it did. Had migrated CS2 from an older imac to a newer imac last year.
    I had purchased Photoshop Elements 8 right about the time Elements 9 came out, and soon after received a Great Deal offer via email to purchase a full version of Photoshop CS5 for about half price. I jumped on it; also received free upgrade to 5.5.
    Since Photoshop was all I was using anyway, worked out perfect.

  • Install Acrobat 7 and CS2 applications - running Windows 2000 and IE 6

    need to install replacment Acrobat 7 and CS2 applications - running Windows 2000 and IE 6. Any problems with this?

    http://web.archive.org/web/20070203090721/http://www.adobe.com/products/creativesuite/syst emreqs.html

  • Leopard: Office and CS2 Flawless

    I loaded Leopard last night with an erase and install because my system never really seemed to run as fast as I expected. Especially, when the systems at work are faster and have slower CPU’s and 2 less gigs of RAM. But I have 2 HD’s and I moved all my files to the slave drive. Installed the OS and then loaded MS Office 04 and Adobe CS2. Went ahead an added all updates to both applications and they run smoothly. I am currently building a catalog in CS2 and it runs flawless. My system is quite faster, but I think that is attributed to never re-installing Tiger in the past for optimization. So for those who wonder, “YES” Office and CS2 run fine in Leopard. Leopard is solid, great job Apple.

    loribwith wrote:
    When I launch the program, it gets to the end and force quits.
    What do you mean by "force quits"?  Force quit is when you force an application to quit.  Programs don't "force quit" on their own.  Do you mean the program crashes?  Any error message(s)?

  • CS and CS2 Metadata Preferences are dropped intermittently

    I work for a forensic laboratory and my section uses Photoshop CS and CS2 on WindowsXP. While working with images for comparative analysis any enhancements or changes to the image must be documented. We set the Preferences to record a "detailed" history log in the metadata for the image.
    We have found that sometimes these Preferences are dropped for some reason and the Metadata History Log is not set. Is this a common problem and is there a fix?

    > I work for a forensic laboratory and my section uses Photoshop CS and CS2 <br /><br />I would have thought you'd be using Photoshop CSI. <g><br /><br />Sorry, I just couldn't resist.<br /><br />Bob

  • CS3 and CS2

    I was searching forum and read that it may be an issue with installing CS3 and CS2 on the same computer. Can someone confirm this for me as true.
    Thanks,
    Tim

    Never had any problem at all, although (disclaimingly yours) YMMV.
    I should mention that my experiences are based on chronologically installing CS, CS2, and CS3,
    i in that order.
    (It might be important -- perhaps someone with lots of free time can experiment with different install orders.)
    As the file extension for all three versions is the same (".indd"), Windows cannot link files made with different versions to their original creators, and using the Explorer, the latest installed version will lways open. However, each separate program can be started manually, and can open its own documents and older ones w/o any problem at all.

Maybe you are looking for

  • Step by step installation for java card kit 2.2.2

    can anyone help me with a complete step by step installation information for java card kit 2.2.2, i already tried to follow the instruction given in the software i download n still stuck in setting the java path. any recommendation thanks for the hel

  • How can I send photos from my iPhoto account to another account?

    Hi, I recently got me a new MacBook and thus dumped my old one at my parents. They also have an iPad 3 and I configured their MacBook on Mountain Lion to work with their iPad. I have a bunch of pictures in my iPhoto library that I want to make availa

  • C4180 problem with printing photos

    have a problem with printing photos on my C4180. Got a color photo ink 348 but the printer prints photos only in balck and white, anyone knows how to fix it??

  • Launch javascript function from a C++ plug-in

    Hello, I succeed to launch a javascript file from my c++ code but I would like to directly go to a specific function. I used IScriptUtils to get a result data WideString scriptPath("/path/myscript.jsx"); IDFile scriptFile(scriptPath); InterfacePtr<IS

  • TAM 6.1 with IDM 6.0 SP1

    I tried configurng TAM with IDM 6.0 SP1. This is the error i am getting Resource adapter class 'com.waveset.adapter.AccessManagerResourceAdapter' could not be instantiated: com/tivoli/pd/jutil/PDException (Unsupported major.minor version 49.0) The re