Intel Auto Config Assistant Error

I'm using the auto config boot disk, I boot the kernal from the CD, I select English as the install language, then I get the error message, " no disk found that meets the criteria to install the installation software" ? I'm confused because the disk and cd are found during the scan for booting the kernel. I tried formating the disk both fat16 and fat32. Please help. Thanks in Advance !

I had exactly the same problem.
Try booting directly from the Solaris CD 1 / 2
(without bootdisk).
This worked for me.I tried booting from CD 1 and I got the error message "cannot find boot.bin ". Now I have switched to another motherboard and install CD boots fine but now I have issue with installer software copying to hard disk, after mini.root and platform specific files copy I get the following error message on reboot attempt., "fdisk: cannot stat device /dev/rdsk/c0d0
" Thanks for any help in advance"

Similar Messages

Auto config error

Hi
when i run the auto config it shows the error
the log file is
The log file for this session is located at:
dten/w01/oracle/dtenappl/admin/DTEN_oraapps/log/07021351/adconfig.log
AutoConfig could not successfully execute the following scripts:
Directory: /dten/w01/oracle/dtencomn/admin/install/DTEN_oraapps
adgenjky.sh INSTE8_SETUP 1
AutoConfig is exiting with status 1
Regards

user11084555 wrote:
Hi
when i run the auto config it shows the error ...
General EBS Discussion
this is the place where you want to ask this question
>
Regardsbest and superb regards

Database Config Assistant - Oracle 9.2 on Linux

I installed Oracle 9.2.0.1.0 on Red Hat Linux v8.
When I try to use the Database Config Assistent to create a database, I get an ora-27123, "unable to attach to shared memory", error.
This occurs in the 3rd step of database creation,
Copying database files
Initializing database
Creating and starting Oracle Instance
I can create a database manually - using hand written scripts.
If I forget to define and export ORACLE_SID, I get
the same problem when I try to startup a database.
1. does the DBCA work correctly in Oracle 9.2.0.1.0
on Linux?
2. if so, how do I get it to work ok?

Just a question...
I have got Oracle 9.0.1 installed on win xp in C drive and 6i patch 15 installed in D drive..My window xp in on D drive.....
So after installation of LINUX will I be able to install another Oracle 9.2 database if yes..Which Drive ( C or D) should I install ? or its better to keep only on Oracle database version...
Thanks

Auto confing throws error

Hello
When I ran auto config on database tier i am getting this issue what could be the reason
I had install oracle apps R12 on windowsXp
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_sunrise
afdbprf.cmd INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_sunrise
adcrobj.cmd INSTE8_APPLY 1
when on appllcations i am getting auto config with erros
AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\inst\apps\VIS_sunrise\admin\install
adgendbc.cmd INSTE8_SETUP 1
afcpnode.cmd INSTE8_SETUP 1
afgcsreg.cmd INSTE8_SETUP 1
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\inst\apps\VIS_sunrise\admin\install
adadmprf.cmd INSTE8_PRF 1
afadmprf.cmd INSTE8_PRF 1
afcpctx.cmd INSTE8_PRF 1
afcpgsm.cmd INSTE8_PRF 1
igccmprf.cmd INSTE8_PRF 1
jtfictx.cmd INSTE8_PRF 1
okladmprf.cmd INSTE8_PRF 1
txkJavaMailerCfg.cmd INSTE8_PRF 1
txkWebServicescfg.cmd INSTE8_PRF 1
AutoConfig is exiting with status 12
thanks
Sunil
Edited by: RedRose on Jun 15, 2012 9:01 AM

hello
windows XP Service Pack 3 and application Rel 12.1.1
I hope i had problem with listener
database autoconfig log file information:
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : sunrise
sDbDomain : apps.com
sDbPort : 1567
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@sunrise.apps.com:1567:VIS
Exception occurred: java.sql.SQLException: ORA-28000: the account is locked
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sunrise.apps.com)(PORT=1567))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: ORA-28000: the account is locked
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sunrise.apps.com)(PORT=1567))(CONNECT_DATA=(SERVICE_NAME=VIS.apps.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
     Verifying connection to the Database : Could not be stablished
     No Restore Profile file created.
Restore Profile utility ran successfully
===========================================================================
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_sunrise\06142330\adcvmlog.xml.06142332
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_sunrise
afdbprf.cmd INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_sunrise
adcrobj.cmd INSTE8_APPLY 1
AutoConfig is exiting with status 2
applications side auto config log file information;
tantiateFile:
C:\oracle\VIS\inst\apps\VIS_sunrise\admin\install\igccmprf.cmd
script returned:
Thu 06/14/2012
11:08 PM
Enter the Username/Password: ECHO is off.
ECHO is off.
Thu 06/14/2012 11:08 PM
ECHO is off.
ECHO is off.
This script requires the following files:
ECHO is off.
C:\cygwin\bin\bin\vcvars32.bat
ECHO is off.
APPSORA.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : C:\oracle\VIS\apps\tech_st\10.1.2
ORACLE_SID :
TWO_TASK : VIS
PATH : C:\oracle\VIS\apps\apps_st\appl\au\12.0.0\bin;C:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\bin;C:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin;C:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;C:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\apps\apps_st\comn\util\unzip\unzip;C:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;C:\oracle\VIS\apps\tech_st\10.1.2\bin;C:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;C:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;C:\cygwin\bin;C:\WINDOWS;C:\WINDOWS\system32;C:\oracle\VIS\apps\tech_st\10.1.3\ant\bin
LD_LIBRARY_PATH : C:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\lib;C:\oracle\VIS\apps\tech_st\10.1.2\lib;C:\oracle\VIS\apps\apps_st\appl\cz\12.0.0\bin;C:\oracle\VIS\apps\tech_st\10.1.2\lib
ECHO is off.
ECHO is off.
Running SQL script
ECHO is off.
SQL*Plus: Release 10.1.0.5.0 - Production on Thu Jun 14 23:08:22 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
Error returned while running igccmprf.cmd
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
Product Top Drivers executed : AD_TOP FND_TOP ICX_TOP MSC_TOP IEO_TOP BIS_TOP AMS_TOP CCT_TOP WSH_TOP CLN_TOP OKE_TOP OKL_TOP OKS_TOP CSF_TOP IGS_TOP IBY_TOP JTF_TOP MWA_TOP CN_TOP CSI_TOP WIP_TOP CSE_TOP EAM_TOP FTE_TOP ONT_TOP AR_TOP AHL_TOP OZF_TOP IES_TOP CSD_TOP IGC_TOP
===========================================================================
Starting Restore Profile utility at Thu Jun 14 23:08:23 IST 2012
Using version 120.4
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=sunrise)(PORT=1567)))(CONNECT_DATA=(SID=VIS)))'
Trying to connect using APPS_JDBC_URL
Exception occurred: java.sql.SQLException: The Network Adapter could not establish the connection
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : sunrise
sDbDomain : apps.com
sDbPort : 1567
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@sunrise.apps.com:1567:VIS
Exception occurred: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sunrise.apps.com)(PORT=1567))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sunrise.apps.com)(PORT=1567))(CONNECT_DATA=(SERVICE_NAME=VIS.apps.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
     Verifying connection to the Database : Could not be stablished
     No Restore Profile file created.
Restore Profile utility ran successfully
===========================================================================
adcvmlog.xml renamed to C:\oracle\VIS\inst\apps\VIS_sunrise\admin\log\06142259\adcvmlog.xml.06142308
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\inst\apps\VIS_sunrise\admin\install
adgendbc.cmd INSTE8_SETUP 1
afcpnode.cmd INSTE8_SETUP 1
afgcsreg.cmd INSTE8_SETUP 1
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\inst\apps\VIS_sunrise\admin\install
adadmprf.cmd INSTE8_PRF 1
afadmprf.cmd INSTE8_PRF 1
afcpctx.cmd INSTE8_PRF 1
afcpgsm.cmd INSTE8_PRF 1
igccmprf.cmd INSTE8_PRF 1
jtfictx.cmd INSTE8_PRF 1
okladmprf.cmd INSTE8_PRF 1
txkJavaMailerCfg.cmd INSTE8_PRF 1
txkWebServicescfg.cmd INSTE8_PRF 1
AutoConfig is exiting with status 12
Edited by: RedRose on Jun 15, 2012 9:46 AM

9iAS Install: Config Assistant, Randomize Password Failing

Am installing 9iAS Rel 2, on a windows 2000 SP 2.
The hardware is as P3 Xeon with 4 CPU's and 3 Gig of Ram.
Install is failing on multiple config assistants but the first one to fail is the Randomize password. The error on the screen says, "oracle.ias.repository.schema.SchemaException: Cannot connect to this database".
I looked in the InstallActions log and this is the error,
" Launched configuration tool Oracle9i Application Server randomize Password Command which is being spawned is E:\ora9ias/jdk/bin/javaw -classpath .;E:\ora9ias/jlib/repository.jar;E:\ora9ias/lib/xmlparserv2.jar;E:\ora9ias/jdbc/lib/classes12.jar;E:\ora9ias/config/randomtool.jar;E:\ora9ias/jlib/jndi.jar;E:\ora9ias/jlib;E:\ora9ias/lib;E:\ora9ias/j2ee/home/jaas.jar;E:\ora9ias/jlib/ojmisc.jar;E:\ora9ias/lib/nls_charset12.zip;E:\ora9ias/j2ee/home/jazn.jar oracle.ias.randomtool.RandomTool r -o E:\ora9ias -f E:\ora9ias/config/noschemapwd
Configuration tool Oracle9i Application Server randomize Password failed
oracle.ias.repository.schema.SchemaException: Cannot connect to this database."
I bring up a command dos window and can connect to the database just fine. i.e.
C:\>sqlplus ods/ods@iasdb
SQL*Plus: Release 9.0.1.3.0 - Production on Wed Jul 17 07:13:07 2002
(c) Copyright 2001 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.3.1 - Production
With the Partitioning option
JServer Release 9.0.1.3.0 - Production
SQL>
Anybody have any ideas? Sure would be appreciated.
Thanks

Hi, we have exactly the same problems.
The Single Sign-On configuration assistent won't install either, as does the mod_osso.
Have you found a solution ?
Thanks,
Yuri Arts

Migration Assistant Error Some files from ".journal" could not be transferred?

Hello, world.
A few days ago I replaced my the 97% full 100GB hard drive in my Dad's Core Duo 2.0GHz Macbook Pro with a 500GB but I received an ominous error at the end of the Migration Assistant transfer. Here are the steps I took:
1. Replaced physical drive.
2. Booted up from OS X Snow Leopard disc.
3. Formatted new drive as OS X Journaled using Disk Utility.
4. Installed OS X Snow Leopard on the new drive.
5. When prompted by OS X Installation, I selected transfer data from another volume.
6. Placed the old drive in an enclosure and connected via USB.
7. At this point I let Migration Assistant take over.
It took an hour and a half or more to transfer the data and everything SEEMS fine. However, at the end I received the following error message from Migration Assistant:
Errors and Warnings:
- 2013-11-02 16:15:49 -0400 Some files from ".journal" could not be transferred
- 2013-11-02 16:15:49 -0400 Some files from ".journal_info_block" could not be transferred
I have searched around but I've been unable to find any information on this. In other instances of these warnings, people seemed to be pointing the finger at moving from PowerPC macs to Intel Macs but this was Intel-->Intel.
I did find someone suggest one other thing in another thread:
"My reading of those error messages indicates that there's something wrong with the journaling files on the PB. I suggest that you disable and reenable it on the PB"
However, I do not know how to enable or disable journaling without reformatting the drive from scratch as journaled or non-journaled.
(post found here: https://discussions.apple.com/message/8675337#8675337)
Question: Should I be worried and does anyone know specifically what this error indicates? Is it possible that my dad's old hard drive was NOT formatted for journaling and MA was looking for these journal related files and unable to find them?
Thank you all in advance for your help,
Nick

What options did you select for Migration Assistant to transfer? For instance, did you select network & computer settings?
"Opt" sounds like the name of a folder, not a file type. On your 13" MacBook, do you have any folder by that name, especially in your home folder?
Also, have you run Disk Utility's *verify disk* check on the MacBook's drive?

Boot camp assistant error update ROM

I apologize for cross-posting; I had this over at the Snow Leopard forum and it was suggested I try putting this over here.
I have a Mac Pro 4.1 using 10.6.5 and BC Setup Assistant 3.0.1.
I'd like to enlarge the space on my BC partition of my startup disk, but I have the familiar boot camp assistant error which tells the user that in order to install boot camp you must update the Boot ROM Firmware. I've already updated the firmware to 1.4 (MP4.0081.B07; SMC Version 1.39f5), so this gets me nowhere. What's a little different about my problem than most of the others I've seen is that I have an early 2009 Mac Pro, not a laptop, AND journaling is enabled on all my disks.
I tried downgrading to 10.5.6 by installing it on another drive and starting up from that. It shows that Boot Camp Setup Assistant is version 2.0, but still it tells me that I need upgrade the Boot ROM Firmware.
From within Windows I installed Boot Camp 3.1 and 3.2 and restarted both times. I've run Disk Utility and verified and/or repaired Disk Permissions on startup disks; so, too, Verify Disk.
I've tried installing Boot Camp on a new, blank, journaled drive. I get the same update your firmware message.
Any help you can offer over this American Thanksgiving Holiday will be greatly appreciated.

No I have only one physical HDD. Here is a diskutil list result
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.3 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            499.4 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
Also here is a system info
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.69f3
15-inch, Late 2011
current situation
- I've recovered from external drive (mountain lion 10.8.1 ) which i prepared by Lion Diskmaker before.
Current issues:
1) I have Recovery HD but when I boot from it - Reinstall Mac OS X option is not working
2) I have EFI password and won't be able to clear it as well as reset PRAM
3) Boot Camp Assistant is not working as well with the error in the subject
Any ideas how to fix all of these?

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Windows LV6.0 running on Linux Wine: config.cpp error (line 404)

Have anyone tried to run LabView (Windows version) under Linux using the Wine "emulator"?
Trying this on Debian Woody, with a Win98 install of LabView 6.0 returns:
config.cpp error (line 404)
I tried to search for such a file on both Win/Linux partitions: there's none.
So how am i gonna check this line 404?
Any clue would be strongly welcome!

I agree with Labviewguru about getting Labview for Linux. The only
problem is that you have to dish out $2000 or $3500. They don't have a
Base package.
I'm not sure if NI recomends a particular window manager but I do know it
will run on any of them. In an extreme case I used it on a PII 233MHz,
64MB ram, and a 300 MB disk. It was a Slackware distro using the fvwm2
window manager. Ran great. Presently I run it with Gnome.
My point is that if you have to buy a LV for Linux license, at least you
can save money buy putting it on a machine that's been used as a paper
weight for several years.
-kevin
In article <[email protected]>,
"Labviewguru" wrote:
> I don't believe you can run LabVIEW in an e
mulation environment. There
> is too much system control that LabVIEW needs a handle on to be able to
> run on an emulator.
>
> The reason you are not able to find and troubleshoot that file is
> because it is part of the source code for LabVIEW, and doesn't exist
> except in a super secret vault which may or may not be located in Austin
> Texas...
>
> Are you aware that there is a version of LabVIEW for Linux? I believe
> that they recommend running KDE or similar GUI, but check on the support
> website for that at ni.com/linux.
>
> I hope that was enough of a clue...

Outlook 2010 Auto Config doesnt tick the "use outgoing mail server auth" settings

Hi Guys
I've got a domain here and an auto-config setup for Outlook whereby it goes to a website on the domain controller and downloads an xml looking like this:
<?xml version='1.0' encoding='utf-8' ?>
<Autodiscover xmlns='http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006'>
<Response xmlns='http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a'>
<User>
<DisplayName>User Name</DisplayName>
</User>
<Account>
<AccountType>email</AccountType>
<Action>settings</Action>
<Protocol>
<Type>IMAP</Type>
<Server>mail.host.com</Server>
<Port>143</Port>
<LoginName>[email protected]</LoginName>
<DomainRequired>off</DomainRequired>
<SPA>off</SPA>
<SSL>off</SSL>
<AuthRequired>on</AuthRequired>
</Protocol>
<Protocol>
<Type>SMTP</Type>
<Server>mail.host.com</Server>
<Port>25</Port>
<LoginName>[email protected]</LoginName>
<DomainRequired>off</DomainRequired>
<SPA>off</SPA>
<SSL>off</SSL>
<AuthRequired>on</AuthRequired>
<UsePOPAuth>on</UsePOPAuth>
<SMTPLast>on</SMTPLast>
</Protocol>
</Account>
</Response>
</Autodiscover>
As can be seen, we use IMAP here rather than exchange
Now, when I go to set up an account, outlook DOES configure most things presented in this XML, but there seems to be a bug in that while it knows and enables "My outgoing server(SMTP) requires authentication" checkbox, it DOESN'T then enable the relevant
radio button that one would assume <UsePOPAuth> (== use the same settings as my incoming server) intends.. No radio button is checked, which means that mails do NOT send :/
Here's a pic:
So, alas, my auto-setup still requires the depeest level of manual interaction to set it up.. i.e. it's fairly useless. I'd say for sure this is a bug in outlook's auto config, but how to report it to microsoft?

Hello,
Thank you for your report. I am trying to involve someone familiar with this topic to further look at this issue.
Tony Chen
TechNet Community Support
A new Office has arrived, try it now.
A beautiful Start. It begins here. Windows 8 and Windows RT.
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Instrument I/O assistant error msg "Unable to view proterties"

Hi, NI's AE,
I have re-installed many times NI LabView8.2(EV) + DAQmx8.3 on all
in one SOC platform(X86) with WinXP(SP3) step by step, but all
rebooting fail after DAQmx8.3 installed.
Then I re-install pure WinXP(SP3) + LabView8.2(EV) + DAQmx8.9,
rebooting ok.
LabView simulated VI from template works well, however I got error
"Unable to view properties" when I drag & drop "DAQ Assistant"?
After google the related issue of "Instrument I/O Assistant error".
I check the "Add/Remove S/W List" and "System Services" of window,
everything seems ok.
Attach file description :
    Add_Remove_List.jpg -
        No extra software installed, except NI's S/W.
    Add_Remove_NI_List.jpg -
    The key drivers, NI Instrument I/O Assistant & NI-VISA 4.0 &
        NI-488.2.2.46 all be installed well.
    NI Service List.jpg -
        NI's related service be well active.
    Instrument IO Assistant - Unableto view properties error.JPG -
        Drag & drop "DAQ Assistant" VI, popup error dialog box
        "Unable to view properties", not "Create New Express Task"
        form.
Is there any compatible issue between LabView8.2 & DAQmx8.9 ?
B/R
Hank

Sorry, forget attach file!
Attachments:
Add_Remove_List.JPG ‏99 KB
Add_Remove_NI_List.JPG ‏132 KB
Instrument IO Assistant - Unableto view properties error.JPG ‏77 KB

Aspnet_compiler web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'

My latest MVC 5 project built with VS 2013 compiled and works fine on my PC but can not be published to server using command line aspnet_compiler. I kept getting the web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'
In my web.config file, I have the following as suggested by many for solution:
<add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<add assembly="System.Data.Entity.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
However, the error is persisting. I have no clue how to fix this. Hope someone can help.

Hello FredVanc,
As you mentions, it could work with your develop environment, so I am wondering it is that on the server machine, the assembly is not there actually. Here are some information I found which might be helpful:
https://support.microsoft.com/en-gb/kb/958975?wa=wsignin1.0
https://social.msdn.microsoft.com/Forums/en-US/1295cfa8-751b-4e9b-a7a7-14e1ad1393b6/compiling-error?forum=adodotnetentityframework
By the way, since this issue is related with ASP.ENT project, I suggest that you could post it to the ASP.NET forum, there are web experts will help you:
http://forums.asp.net/
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

DB Config Assistant Problem post install

I have downloaded Oracle 8i Personal Ed from Oracle Technet. I have gotten almost to the end of installation onto Win2K Professional. It has successfully configured Net8 Config Assistant and OMS NT Service, but the Oracle DB Config Assistant configuration fails. The dbSilentCreate.log file only says the following :
8i is an invalid command line argument.
Can you help me out please.
Thanks In Advance
Andrew
null

can you be a bit more specific about which parameters you need help with?
defaults are (to my understanding):
Listener port number: 1521
Database SID: $ORACLE_SID
Service name: $ORACLE_SID
Email address for notification: [email protected], if left null no emails are sent
Email gateway for notification: localhost (if you have sentmail or postfix installed and configured)
Password for dbsnmp: secret?
Password for sysman: secret?
Password for sys: secret?
This should help you.
@andreas: giving the advice to run a script that jlopes needs help with, isn't the best advice in the world. Trying to get your postcount up?

Oracle Net config assistant not opening on windows.

Hi,
I installed Oracle 9i server on a windows XP machine on Friday, 2nd December. I configured the listener service, netconfig name and my application was up and running.
Today I wanted to make some changes in the listener service; but the net config assistant window is not coming up. New processes launch.exe and jrew.exe are starting in the background with each attempt to launch.
I made sure I am logged in as the same user which installed Oracle on the machine(having ORA_DBA privilages), gave the full control privilages to this user. But the net config assistant is still not opening up.
Could anyone help in this regard.
Thanks
Puneet

Has anyone of you seen this problem before??
Kindly reply asap.
Thanks

How to change what a new tab opens to when auto:config does not work?

Hi,
For an unknown reason my new tab changed from google to a weird yahoo one today. I cannot find how to revert it back even after i made google my home page and default search engine. I checked online and saw that perhaps I could fix things with the auto:config but I cannot even get it to open. When I try a search engine opens up. Any help would be appreciated.

The correct name of that page is <b>about:config</b> and not 'auto:config'.
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
You can check the value of the browser.newtab.url pref.
See also this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites

Intel Auto Config Assistant Error

Similar Messages

Maybe you are looking for