Intel card uses Cisco PEAP supplicant

I have installed an Intel card on a PC running XP which also has the Cisco drivers installed. When I set up the Intel card to use PEAP, it also uses the Cisco PEAP supplicant, instead of the XP PEAP supplicant.
Any comments from a technical and licensing viewpoint?

The Cisco Peap supplicant will overwrite the Microsoft PEAP.
That is the reason why it uses the Cisco PEAP supplicant.
Microsoft upgrades may wipe out Cisco PEAP implementation.

Similar Messages

Can I use Sandisk Compact 4GB Flash card on Cisco 2800 series Routers

Can I use Sandisk Compact 4GB Flash card on Cisco 2800 series Routers

Yes can confirm the Sandisk Compact 4GB Flash Card works in 2800 series, the exact card above...
Initially I attempted to shrink the partition on the card to a 2GB FAT partition using the steps here http://timescience.wordpress.com/2010/08/09/how-to-downsize-a-4gb-compact-flash-card-to-2gb/
However when I inserted it into the router and tried a directory list it wouldn't have a bar of it...
*Jun 23 14:11:01.391: %FILESYS-5-CF: CompactFlash insertedrtrvoip#dir flash:%Error opening flash:/ (Invalid DOS media or no media in slot)rtrvoip#format flash:
So I ended up running a format flash and voila, 4GB of flash memory no problems...
rtrvoip#format flash:Format operation may take a while. Continue? [confirm]Format operation will destroy all data in "flash:". Continue? [confirm]Writing Monlib sectors....Monlib write completeFormat: All system sectors written. OK...Format: Total sectors in formatted partition: 7812945Format: Total bytes in formatted partition: 4000227840Format: Operation completed successfully.Format of flash: completertrvoip#dir flash:Directory of flash:/No files in directory3999793152 bytes total (3999793152 bytes free)

AMD CPU with Vista cannot connect to WLAN using MS-PEAP with WEP-128

We have a notebook "HP Pavilion tx1000 (AMD Turion64 CPU with Vista 32bits)". The notebook is using Broadcom 802.11a/b/g chipset, running AMD and Vista. It cannot associate to WLAN using MS-PEAP and WEP-128. Also, it cannot associate to PEAP and WPA2-AES.
The AP's log shows:
Oct 11 15:35:20 CCT: %DOT11-7-AUTH_FAILED: Station xxxx.xxx.xxxx Authentication failed
The ACS's log shows:
"EAP-TLS or PEAP authentication failed during SSL handshake"
We do not validate the certificate in the wireless setup. Vista's WLAN AutoConfig is used to configure the wireless profile. We are running Autonomous AP with Switch-Based WDS (WLSM).
We have no issue with Intel Centrino on the above authentication and encryption scheme.
Have checked the CCX program, broadcom 802.11a/b/g chipset is supported only for windows 2000 and xp. There is no mentioning about support for vista. Could this be a compatibility issue?
Please advise and thks

Maybe look at this post: http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf9be9/5#selected_message

MAC OS X unable to download Cisco ISE supplicant agent

Hi,
I have a problem with MAC OS X clients unable to download the Cisco ISE supplicant agent using Safari browser but able to login on the ISE guest portal. If the same client was to login to the ISE guest portal using Firefox; it has no issues downloading the ise supplicant and posture agent.
I have tried to update the Java version on the client to the latest; however it does not resolve the issue. As I am new to MAC OS clients; I was wondering what may be the cause of the issue?
I have summarized the issue as follows:
1. MAC OS X 10.8 with safari 6 -- unable to download agent but can login successfully on the Cisco ISE guest portal
2. MAC OS X 10.8 with Firefox -- able to login to Cisco ISE guest portal and download agents; no issues
3. MAC OS X 10.7 with safari and firefox --- unable to download agent but can login successfully on the Cisco ISE guest portal
4. Windows XP & Windows 7 & Iphone/Ipad/Android -- able to login/download agent without any issues
Any suggestions is appreciated.
Thanks.

For Agent Download Issues on Client Machine
• Ensure that a client provisioning policy exists in Cisco ISE. If yes, verify the
policy identity group, conditions, and type of agent(s) defined in the policy.
(Also ensure whether or not there is any agent profile configured under Policy >
Policy Elements > Results > Client Provisioning > Resources > Add > ISE
Posture Agent Profile, even a profile with all default values.)
• Try reauthenticating the client machine by bouncing the port on the access
switch.
Remember that the client provisioning agent installer download requires the following:
• The user must allow the ActiveX installer in the browser session the first time an agent is installed
on the client machine. (The client provisioning download page prompts for this.)
• The client machine must have Internet access.
Client Machine Operating Systems and Agent Support in Cisco ISE
Check the following link
http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html#wp95449

How can ftp service on non-standard port be load balanced using Cisco ACE.

How can ftp service on non-standard port be load balanced using Cisco ACE.For example ftp service required on tcp 2000 port

Hi Samarjit,
you can do this by specifying the port number in the class map that you create . Please find the below mentioend config guide where you can specify the tcp/udp port , range or ports or even the wild card to match the port.
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/configuration/administration/guide/mapolcy.html#wp1318826
Regards
Abijith

Tunneling using Cisco VPN Client 4.9

Hello,
in recent times I used the Cisco VPN Client 4.7 with no problems:
1. I installed the software
2. I started "Internet Connect.app", created a VPN connection (PPTP) with no entries
3. created a new network connection ("Tunnel to company"), with ETH and VPN (PPTP) enabled
4. the ethernet interface points at the local router wich is connected to my ISP
5. DHCP-Client-ID: our.company.de, DNS-Server: no entry, Domain-Names: our.company.de
6. Proxies: our companies proxies
7. the VPN (PPTP) interface is configuered as PPP, DNS-Server: our companies server IPs, Domain-Names: no entries, Proxy: no entries
8. Starting the Cisco VPN Client I configuered an new session, connected, ok
As said, this was in the old days.
Now using Cisco VPN Client 4.9 on a MacBookPro (Intel) this works also with one exception:
I can establish a network connection (ping, smb, AFP, intranet/HTTP) only using the companies fully qualified domain name, e.g.:
1. ping server1: unable to resolve name
2. ping server1.our.company.de: works as exspected
I am using Cisco VPN Client 4.9.00 (0050), Mac OS X 4.8 with all available updates.
Any help would be appreciated
Roland

...
trying the same (without the "Internet Config.app" / VPN PPTP) using VPN Tracker works fine. But I don´t want to spend Euro 79.-...
Roland

VLAN Assignment of SSID using Cisco AV Pair or Dot1x ?

Hi.
I am looking to setup wireless access to 2 of my internal VLANs. I am using Cisco 1130AG, PEAP and RADIUS for the authentication as one network is for employees only and one restricted to guests only.
I was wondering which was the most recommended solution.
1. To have 2 SSIDs, with one in each VLAN with the access restricted using the Cisco AV Pair attribute in RADIUS
or
2. Use one SSID and use Dot1x and the Tunnel attribute to assign the VLAN?
This option I feel is more complicated and I am still unsure how this works in reality as the SSID itself can only be part of one VLAN????
Do I have to configure a Dot11Radio and Fastethernet interface for each intended vlan in this case?
Could someone please explain and suggest their preferred option.
Thanks.

You should have two ssid's one for your internal and one for guest. You should use 802.1x for your internal and your guest should be open with a Login page of some sort. You can still use dynamic vlan assignments so that your internal users who try to access the guest page will be put on the internal vlan. Of course the guest will always be placed on the guest vlan. If you have a WLC, the login page and setup is easier, because in autonomous you will have to use something like ZoneCD for guest if you want a HotSpot type wifi.

Windows 7 Cisco PEAP overwrote Microsoft Protected EAP (PEAP)

I installed the Cisco Aironet PEAP supplicant in order to get EAP-GTC support that is lacking in Windows 7. Instead of adding it as an option, it replaced/overwrote the Microsoft PEAP choice...which would have been fine but the version I installed lacks MSCHAPv2 support, which I also needed in addition to EAP-GTC.
I tried to uninstall the Cisco driver, it shows up in the uninstall list, but it does not uninstall.
My question is how can I uninstall the Cisco piece OR how can I re-install Microsoft PEAP w/o reinstalling the OS?
Thanks!

I did, blue screening on all the ones I tried.
I ended up just re-installing. Its a little bit ridiculous, but I am fine now. Thanks for the reply.

Cisco PEAP vs. MS PEAP

Can anyone tell me advantages/disadvantages of using one type of PEAP over another? If anyone has a nice, non-biased link that can sum it up that would be appreciated as well. Thanks.

During my testing with MS-PEAP I had machine authentication on. When the computer boots, the computer performs a machine authentication (before the ctrl-alt-del screen appears) into the AD domain. I can see the machine ID (computer name) in the clear before the tunnel is created. Once the user logs into the computer, another EAP authentication occurs. During this authentication the username is sent in the clear before the tunnel is created.
All of Microsofts documentation on PEAP gives the perception that all authentication credentials are transmitted within the tunnel. Which is not the case.
I have not tested the Cisco PEAP client but when I opened a Cisco case (600215327) the TAC stated:
Whether the username is sent in the clear in phase one of PEAP authentication, depends upon the client you are using. The Cisco Aironet PEAP client sends the username through the SSL tunnel only. The initial identity, used in phase one and which is sent in the clear, is MAC address of the end-user client with "PEAP_" as a prefix. The Microsoft PEAP client does not provide identity protection; the Microsoft PEAP client sends the username in the clear in phase one of PEAP authentication.
Rob

I bought the wrong gift card. I wanted to buy an itunes gift card but instead I accidentally got Apple store gift card via email. How can I buy an itunes gift card using my apple store gift card?

I Wanted to buy itunes gift card but instead I got apple store gift card accidentally how can I buy itunes gift card using my apple store gift card?

You can't from Apple, they don't let you buy iTunes gift cards with an Apple Store gift card. You could see if a different store in your country might let you (though they possibly won't), or try selling the card to somebody e.g. family, friend, eBay etc

Unable to delete files from encrypted external SD Card using File Commander

I've run into some trouble trying to delete the directory com.spotify.music from my external SD Card (encrypted) after a hard reboot using the reset button next to the sim card.
I need to do this for the Spotify app to work (FC on starting it) and I'm currently unable to delete the folder and its contents from Sony provided file explorer(FC File Commander).
Is there a way to delete this app from adb or other command line tool or how should I go about this? Developer options are enabled because I'm learning to develop apps. Not particularly keen on rooting or otherwise format my SD Card but it's an option if there are no other ways to do it.
I can see the contents of my card using File Commander just fine. Spotify app is uninstalled, I tried remove cache and data before uninstall also.

Thommo wrote:
Are you able to delete files via your Pc or are you able to remove the card from your phone and connect it to a Pc for file deletion - There is a free program called Unlocker currently on version 1.9.2 which is excellent at deleting files that don't want to be deleted - You would install the program then right click the file and choose Unlocker and then when the program starts choose delete
I guess he will not be able to move the SD card to the computer since it's encrypted and is working only with that particular device, but he should be able to access it via PC.
If you can try to uninstall Spotify from your phone. I assume Spotify is not working due to some rubbish inside it's directory, but on the other hand you can't delete the folder because it may be used by Spotify. If you uninstall app folder may be unlocked.
Best regards,
Sergio PL
Xperia Z1 / Nexus 7 (2012)

How do I use Cisco Registered Email Service with 10.7?

I received a email via someone using Cisco Registered Email/Envelope Service. The authentication process required the latest version of JAVA for 10.7, which I downloaded and installed. When I try to logon, the screen hangs with the message "Loading Envelope Tools." If I press "open" again it states "Inactive tools." The alternate method is to open the mail via a secure Web site, which I can open, but I am unable to download attachments. To download attachments, I am directed to a page that begins with "x-msg:" and I get a message that says: "Safari can't open the address .. . because MAC OX doesn't recognize Internet Addresses starting with "x-msg:"

Thanks for the info Roger, this is indeed did work for me (at least the part about signing in on apple.com, haven't tried the rest). Since Apple does not allow for the merging of Apple IDs, my plan is to use the old me.com address (from the free trial) with iCloud but then forward all the messages from the old me.com to my current Apple ID. Problem is all my devices are already associated with iCloud. So... if I want to activate iCloud using the old me.com, how do I do it?
I have two ideas: 1) as you suggest, signing out and signing back in through the iCloud preference pane (either on Mac OS or iOS); but I'm worried this will have consequence - will I be able to sign back in to my main Apple ID account after doing this?
2) create a new user on my Mac and then sign in to iCloud with the old me.com address there, then delete the account.
Thanks for any help with this.

*SD:Payment Cards: Use of Payment Gift card for a purchase on Sales Order*

I have to implement the use of GIft card on the SAP Sales Order. The scenario is listed below.
1.Customer Calls the Call center and want to use the Gift Card issued for Purchases which he/she is making.
2.The asscoiate should be able to enter Gift card Number in the Credit card field of the SAales Order and should be able
to Process the transaction.
3.The authunticity of Gift Card will be checked by the thirdparty Provider ( Like Moneris, Paymetric,etc).
Can this Gift card scenario can be implemented in SAP on Sales Order?.
During the phase of the Saving the order, the Card Funds checking and final purchase need to be completed.
My Questions are:
1.Can this scenario be Implemented on SAP Sales Order.
2.Can we use the current card type and Credit card fields on the Sales order.
3.Can we write the new function Modules to achive this.What Function Modules can be used as basis for this devlopment
4.This scenario is just like a Debit card Transaction( where the Gift Card has certain amount of money on it and when used, the money will be debited from Gift card and transaction is processed).
5.How the settlement is done in this case, will after the Sales order is successfully used this Gift Card, will we need to generate invoice for our account purposes and send the settlemnt file to the thirdparty proviedrs(Moneris,Paymetric ).
6.Did SAP implemented this any where?.
I have full idea of Credit card, but not sure if we can implement this for Gift Card use on sales Order.
Any help is Greatly appreciated and rewarded with many points.
Regards,
Raj
Edited by: RAJENDAR REDDY on Jul 24, 2009 10:04 AM

Hi Raj,
You can process gift cards just like debit cards. You will still have to create billing for it for settlement process.
If your gateway is Moneris, you will still need a middleware such as Paymetric solution to connect to Moneris. My team work with Paymetric to help clients implementing credit card and gift card solutions. We have implemented several gift card solutions though each project has a slightly different solution due to the difference in business requirements.
Hope this helps,
Noriko

HT204053 How can I purchase an iTunes gift card using Apple Store gift card

How can I purchase an iTunes gift card using Apple Store gift card

You can't, Apple does not allow it.

I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 on the page Am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 spaces on the page. I am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

I do the following: Hold down the command key and highlight all the items to be reproduced. Then hold down option and drag the items from the first to each subsequent card.

Intel card uses Cisco PEAP supplicant

Similar Messages

Maybe you are looking for