Intel driver needed for overclocking the Z68MA-ED55?

Purchased the Z68MA-ED55 a few days ago and loaded most of the software off the accompanying disk.  Through LiveUpdate I was invited to download the latest version of Control Center.  After downloading and launching Control Center, I received a pop-up stating "Please install Intel ME driver for CPU over-clocking".
Attempting to download the Intel ME Driver from Intel itself I get a message saying the system is not eligible.  Cannot find the driver directly from MSI.
*NOTE* I am able to overclock through BIOS, it's just not as efficient as Control Center would be.

Thanks for the assistance.  Once I went back to it I realized I tried to install it before and received a message that there was a newer version already installed on the computer.  Installed the older version and it now works.  Seems Control Center has not been updated to work with the newest ME version yet.

Similar Messages

  • Requirements for JDBC Driver needed for SOA 8 }connection pool

    Hi,
    I have an AS400 jdbc driver. This driver is JDBC API version 2.x. Also is a Driver Type 4.
    What are the requirements of a JDBC Driver needed for connection pool in SOA 8?
    Thanks.
    Lorenzo Jimenez

    You can use pretty much any jdbc driver, including type 2 and type 4.
    You need to make sure your shared libraries needed by the driver are available to the appserver when you boot.
    Other than that, it is no different than configuring any other driver.

  • Windows 8.1 display driver needed for HP G62 laptop

    Windows 8.1 display driver needed for HP G62 laptop

    Help us to help you by posting the following information.
    1.  The complete Model Name. or Product Number. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.
    2.  The complete version and name of the operating system you are using ( ie Windows 7 64bit ).
    It would also help if you let us know which CPU your notebook has installed.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HT3951 helo   when i want to dollar from the online manager football and need for speed the game , i try to buy but i cannot because they told ( your purchase could not be completed contact itunes store support to complete this transaction.)  pleasr help

    helo
    when i want to dollar from the online manager football and need for speed the game , i try to buy but i cannot because they told ( your purchase could not be completed contact itunes store support to complete this transaction.)
    pleasr help me for that , i can not buy any thing inside the game .
    i wating , thank you
    Email : [email protected]

    Click here and request assistance.
    (75245)

  • Driver needed for PCI Data Acquisition and Signal Processing Controller of HP 15- r247tu

    Install the Windows 10 Intel IMEI Intel Management Engine Interface (MEI) Driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69593.exe The latest version of the Intel chipset driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69575.exe All Windows 10 drivers available from HP are at the following link.http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7693973#Z7_3054ICK0KGTE30AQO5O3KA30R1

    Hi: Try the chipset driver directly from Intel...the second file is the auto install file. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- If that driver does not install the PCI Data Acquisition and Signal Processing Controller, which the chipset driver should install, download the first file listed above (zip file). Unzip and extract the contents to its folder. Go to the device manager and click on the above device needing the driver.  Click on the driver tab. Click on Update driver.  Select the Browse my computer for driver software option, and browse to the unzipped driver folder. Make sure the Include Subfolders box is checked, and see if the driver installs that way. Then reboot.

  • Windows XP LAN driver needed for my Satellite A100-784

    I bought Satellite A100-784 with Windows Vista. I've removed Vista and installed Windows XP (taken from other non-Toshiba notebook)) and then SP2. Now I can't use the internet because there's no LAN driver. The drivers downloaded from this Toshiba site don't work.
    Any solution for me? I expect other problems to appear soon, with the sound and so on. Isn't there any pack of drivers for this model with WinXP?
    (I'd be very happy to get a quick restore disk with Windows XP in English but customer support won't provide any.)

    Hi
    Your A100 unit belongs to the PSAANE series.
    Toshiba European website provides two different XP Intel Lan driver versions:
    1. Intel LAN driver 8.0.43.0
    2. Intel LAN driver 9.2.24
    The first one 8.0.43.0 was designed for LAN Pro100 and the other 9.2.24 for LAN Pro1000
    Additionally I would recommend following the guidelines described in the installation instruction! The drivers must be installed in the right order.
    Please also take a look into another thread about the same theme:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24125

  • ATI Radeon 9000 Pro Mac AGP (driver needed for OS 9.2?)

    Hi guys!
    How's everybody doin?
    I just picked up a used ATI 9000 AGP 128 MB (as an upgrade for my G4 Quicksilver 800 MHZ).
    I'm using 2 HD's (one with OS9), the other (with OSX)
    I think OS 9.2 will do ok without the need for a driver, but I just wanna make sure ...
    Thanx
    Everyone is very helpful around here
    Mike

    Hello again Carl, and Dave
    I know it's been a while since we last talked about this issue. Well apparently, I do have OS freezing problems
    with 9.2 and the ATI 9000 Mac Pro - take a look:
    http://discussions.apple.com/message.jspa?messageID=4289264#4289264
    Wonder if your driver would solve this?
    But can I put your driver in the system while it's still functioning with the older OEM video card back in?
    (that's the only way I can get the system not to freeze)
    Thanks
    Mike

  • Hp hs2434 windows 7 driver needed for dm1 4310nr

    Hi all,
    I recently formatted my dm1 4310nr from windows 8 to windows 7.  I went to the driver page for the dm1 and it had the Ericsson HP hs2320/hs2330/lc2000/lc2010/hs2340 drivers for win7/8, but not the HP hs2434 drivers.
    The hardware ID is 
    USB\VID_03F0&PID_4B1D&REV_0002&MI_05
    USB\VID_03F0&PID_4B1D&MI_05
    Thanks!

    You don't need monitor drivers, the operating system runs it natively (plug'n'play).
    What Photoshop is requesting is an updated video card driver. Not that Photoshop won't work without it, but some (minor) features may be disabled.

  • CS6: Windows 7: Driver needed for Monitor Philips 200 WP7

    A friend and I have spent about an hour this afternoon trying to get an updated driver for my monitor - Philips 200 WP7.   My current driver is 1.0.0.0.     I only recently got CS6, and it says I should ideally update my driver.   Regrettably Philips doesn't supply a driver for my monitor with Windows 7, only with earlier versions of Windows.      Has anyone here updated this driver for Windows 7, and can they recommend anywhere where we can get hold of an update?
    Help would be much appreciated.

    You don't need monitor drivers, the operating system runs it natively (plug'n'play).
    What Photoshop is requesting is an updated video card driver. Not that Photoshop won't work without it, but some (minor) features may be disabled.

  • CanoScan 88))F driver needed for Snow Leopard

    I need a Driver for the Canon CanoScan 8800F. It does not work with the system. I checked ith Caon and there isn't a driver for it. Does anyone know how to fix it?

    Looking at the Canon Australia web site, there is a version 13.9.1 driver posted for the CS8800F that quotes 10.6 as being supported.
    http://support-au.canon.com.au/contents/AU/EN/0100018002.html

  • Relative size of external hard drive needed for Time Machine

    I have Time Machine up an running on an old 250Gb disk. My new iMac has a 500Gb disk, but lots of free space, so Time Machine is reporting adequate remaining space on the backup disk. Has anyone calculated the sort of ratio in disk sizes that will be necessary over time? For instance, with a 500Gb disk in the Mac, will a 500Gb external drive be sufficient for all time, or will it get full. Should be be considering doubling the external disk size to 1 Tb?
    I need to replace the 250Gb drive and am wondering what size is optimum.

    I've been seeing knowledgeable people writing that a good rule of thumb for "typical" home users is they should have a drive with a capacity of 3 - 4X their system's normal operating size...to maintain a full year's worth of Time Machine data before it starts scrolling off.
    So I guess that means I should be looking at a 1TB drive for my iMac which currently has ~250GB of data on it. Time to review that Bare Feats 1TB drive shootout (http://www.barefeats.com/hard94.html).

  • Chipset driver needed for DV2432NR - Vista 64 bit OS

    I need the Windows Vista 64 bit chipset driver for a DV2432NR laptop.  Would someone from HP or a member with this driver please send me a link for download? The chipset driver is missing from the HP support page of the DV2432NR for some reason.
    Thanks!!
    This question was solved.
    View Solution.

    Hi:
    You need this driver...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46259-1&cc=us&dlc=en&lc=en&...

  • Driver needed for Network controller,PCI Device,SM Bus controller

    Need helpt to get the drivers for win 7 64 bit for Network controller, PCI Device,SM Bus controller, Universal Serial Bus controller, PCI Encryption/Decryption controller

    Hi: For the smbus and usb 3 controllers, download and install the amd chipset drivers and reboot. http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064 PCI device: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141812-1&cc=us&dlc=en&lc=en&os=4063&product=7174407&sw_lang= PCI Encryption/Decryption controller: Download and run this driver.  Then you have to manually install it. http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_133833_1 To manually install the driver, go to the device manager, click on the PCI E/D Controller needing the driver. Click on the driver tab.  Click on update driver.  Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file. That folder will be located in C:\SWSetup\sp66974. Make sure the Include Subfolders box is checked and the driver should install.   Then reboot. Network controller...need the hardware ID for that because I don't know what model wireless card your model has. Since there is no wireless driver installed, there should be a device labeled Network Controller in the device manager under an Other Devices category.  The network controller device will have a little ! mark next to it. So, find the network controller device, click on that and then click on the Details tab. Now you see a Property drop down list and it is defaulted to Device Description. Drop down on that list and select the third item (Hardware ID's). Post the top string of characters you see in the window.  

  • Canon 3245 driver needed for Mac OS X Yosemite 10.10.1

    Dear
    All the drivers available on Canon website do not support version 10.10.1
    I am urgently in the need for a driver Canon 3245.
    Please help.
    Thanks and Regards
    Shubham
    Mackbook Pro, OS X Yosemite, Version 10.10.1

    This includes drivers for 10.10
    http://www.usa.canon.com/cusa/support/office/b_w_imagerunner_copiers/imagerunner _3225_3230_3235_3235i_3245_3245i/imagerunner_3235#DriversAndSoftware

  • Exit/BADI needed for updating the PERNR data in infotype 0105

    Hi team,
    We are getting the external system data through IDocs and we need to process the data in our systems,
    But the PERNR in external system is different than in our system.How we can handle this .
    is there any USerexits/Badi's available for this to handle.
    Please let me know the solution if anybody encounter this problem earlier.
    Thanks for your help
    Regards
    Murali

    Hello Murali,
    If you are using HRMD_A message type the function module IDOC_INPUT_HRMD contains lot of exits and badi's
    here are few
    EXIT_SAPLRHA0_003 - Include ZXHALU07
    EXIT_SAPLRHA0_002 - Include  ZXHALU06
    you may do more research in the function module  IDOC_INPUT_HRMD

Maybe you are looking for