Intel G5 iMac Security slot

instructions quote:
Security slot
Attach a lock and cable to prevent theft (available www.apple.com/store)
Where? I cant find one. Could anyone give me a link to it.

Welcome to the iMac Intel discussions.
http://uk.kensington.com/html/6839.html

Similar Messages

  • Security slot on iMacs

    Hello,
    my workplace is about to buy 30 iMacs (intel based ). I wonder if they have security slots like mac minis have?
    If so, then I am considering this kit http://www.computersecurity.com/mac/imac.htm to secure them to my existing furniture. I wonder if the scissor clip will fit into the iMac slot. The vendor recommends this kit but I want to make sure before ordering.
    Anyone, any idea?
    Thank you
    Message was edited by: aerosmith

    Yes they have one.
    Message was edited by: Templeton Peck

  • My old Intel-Based iMac is no longer recognizing USB wired input devices; it only recognizes Bluetooth.  What happened?

    My friend's old Intel-Based iMac is no longer recognizing USB-wired input devices (Kensington TrackBall, Logitech Mouse) plugged into any USB slot at the back of the computer.
    They were working before and for many years.
    All of a sudden, A pop up window came up. IT said no Bluetooth mice could be found.  We don't know what set off that window to pop up and look for a WL mouse. It never has before in the 5 or more years my friend has been using this computer.
    I supplied a wireless Apple mouse and his is back running again.
    But want to know why his USB-input devices (Except his keyboard) are not being recognized. He would prefer to use his  Trackpad (Wired), but can't find anything in SYstem PReferences to allow that.  The computer only seems to want a Bluetooth input device.
    Anyone have an idea what happened and if this can be reversed?
    I think he is still running Mac OS X 10.5.8.

    Hi Carol, lets try this...
    reset FW bus, same goes for USB reset...
    Reset the Firewire bus
    If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
    1. Shut the machine down.
    2. UNPLUG the power lead to the computer and any firewire/USB drive/devices.
    3. leave it for 10 minutes.
    4. Connect back up and reboot.
    http://www.macmaps.com/firewirebug2.html

  • Convert an iMac G5 PPC to Intel Based iMac early 2006?

    I have been working with Macs for some time and I know how annoying their hardware will only work for one series of computers and that's it. I was given an iMac G5 2004 for free and when looking to replace the motherboard I realized that it only uses DDR memory, terrible. I know they have 17" Intel based iMac G4 computers and figured with an iMac there are few parts you need to worry about. I would need to change out the LCD screen or connector and rewire it, I have hard drives that will work, I will need an Intel Core Duo processor (can pick a working one up real cheap), Motherboard will cost me $100, and I assume the DVD/CD drive is universal and will work with the Intel board. Now my concern is the power supply and the LCD inverter. That is pretty much all there is to these machines.
    Now why don't I just buy a 2006 iMac? Because where is the challenge in that? Has anyone ever attempted this conversion? Money is not a problem, I enjoy moding and having little projects like this. I have a flat screen eMac with an LED LCD screen, I have a G4 with Mac Mini guts, I have a Gen 1 Apple TV running 10.5... you get the idea. I am tearing the machine apart now I just need to find the proper information, Google has failed me. I assume the 2006 MOBO should be a direct fit because the form factor is almost identical. USB and other slots look to be the same, if not I can bust out the plastic fill and Dremel. Anyone have any thoughts besides that this is a dumb idea?
    If I go ahead with this I plan on doing a write-up. In theory, these seems like a very simple conversion just because everything is based around the MOBO and the parts that would need to be replaced I have or are inexpensive. I figure the project would cost me around $300. I run a tech shop and get parts dirt cheap. Any ideas or information would be great as I typically don't work on 2004 models, thanks!
    Please no flaming, if you intend to flame just go bother someone else thanks!

    You also have to consider to port locations, and if the ventilation is enough for the logicboard.
    Furthermore a Mac mini uses a SATA bus that is more geared towards powering 2.5" drives, not 3.5" drives.  Though I've seen some who hacked an eSATA on a Mac Mini on the net.  Don't forget a CoreSolo or CoreDuo Mac Mini won't give you much of an advantage over the G5.  Core2Duo 2.2 Ghz or higher is better unless you still depend on numerous non-Universal applications.

  • How can I format my intell based imac without the original Tiger discs? I have a user account on it that I dont want. I have upgraded to Snow Leopard but I want to to star affresh. Thank you.

    How can I format my intell based imac without the original Tiger discs? I have a user account on it that I dont want. I have upgraded to Snow Leopard but I want to to start affresh. Thank you. I have tried loading the Snow Leopard disc whilst holding down th C key but it goes straight into install mode. I am new to Macs and I have inherited this machine.

    Hello, many options...
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
       3. Click the Erase tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion do a new install.
    Or...
    Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    In the same pref pane highlight your old account, click the little minus icon, then use Disk Utility to Secure Erase Free Space.

  • Intel-based iMac stuck in grey screen with spinning wheel. SMC::smcReadKeyAction ERROR THOP kSMBadArgumentError(0x89)

    Hi guys,
    since yesterday my Intel-Based iMac doesn't boot normally, its stuck in grey screen with a spinning wheel.
    Its an Intel-based iMac 21.5'' purchased in 2011, and i recently (2 months ago) upgraded it to Mavericks.
    -2 weeks ago, i installed smcFanControl app
    -Tried start up in Safe Mode by holding Shift but its not working. i think i hear fans are working more than they were before the problem occurs.
    -entered Single User Mode and i get an error
    SMC ::smcReadKeyAction ERROR THOP kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8029fa1000
    -followed some instructions found online, but can execute the correct commands in SingleUserMode
    tried to remove FanControl as explained here: http://apple.stackexchange.com/questions/110667/errorr-kernel-smcsmcreadkeyactio n-in-console
    any ideas what may caused this and how can i fix this?
    Thanks in advance

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • What can happen to an intel-based iMac when a power outage occurs while it is on and I unplug it to avoid a surge when power comes back?

    The power went out today, while I was using my intel-based iMac (2008) and I rushed to unplug the power from the wall, before the poser could surge back on. Did I do damage?
    I have a surge protector that it was plugged into, but I thought just to be safe I should unplug!
    Thanks, Group!
    artdough

    Good point!
    Art a surge protector (a good one) is designed to provide contant power to the devices that are plugged into it. This is good in the event of a surge of power up or down however in the event of a complete power outage they're of no value.
    A UPS (Uninteruptable Power Supply) is just that, it has surge protection like a surge suppresor however it also has a battery integrated into it. The battery is designed to provide enough power for a user to do an orderly shutdown. In addition most UPS's can also plug into your iMac via a USB cable. Then you can set energy saver preferences that you cannot see now. For example you can set how long the computer should run in the event of power going off. You can also set if you want the computer to reboot or not when the power comes back on etc. For about $100 you can get a fine UPS that will add an additional layer of protection for your computer and give you extra peace of mind.

  • User Contributed Tips in Intel-based iMac Your Intel-based iMac Display

    *The following User Contributed Tips are located in the Intel-based iMac > Your Intel-based iMac Display forum:*
    a brody - Using a second Mac as a display for a first
    http://discussions.apple.com/thread.jspa?threadID=1587927
    Publish date: July 7, 2008
    *The following related tips are located in other areas of Apple Discussions:*
    See also User Tips Library

    My 20" 2.16 GHz Intel Core 2 Duo had become almost useless due to freezes and crashes- with NO crash reports in the logs.
    They were often preceeded by video glitches, so I assumed it was a bad video card- unfortunately soldered to mother board.
    Apparently, from forum postings, this is not an uncommon problem. The computer would run longer if the day was cooler, but rarely more than 10 minutes, so I suspected it was aggravated by heat.
    Then I found this post from Bodomann on an Apple Support forum:
    "Following up on my previous posting regarding my son's late model 2006 iMac that required a $900 logic board replacement:
    Turns out the problem is apparently related to a bad CPU temp sensor. I installed 'iMac Fan Control' (Google it) which reported the CPU temp always at 32 degrees Fahrenheit (obviously incorrect). The same software allowed me to adjust the CPU fan manually. After multiple trials I set the CPU speed to 2800RPM after which the system would run forever - never freezing with the dreaded grey box 'reboot me' screen. I tried several times reverting the software to default speeds and the system would always crash within 10 minutes. "
    I downloaded free Fan Control 1.2 for Imac from Derman Enterprises (they have an Intel iMac and a Mac Book/Pro version). It installs as a system preferences control panel. I cranked up all three fan speeds. The fans sped up noticeably. Horizontal lines have gone from screen (so far), no color artifacts and no crashes yet. I may have a real computer back! Hope Apple checks this out-
    The control panel also gives the temps sensors are reporting at the CPU, hard drive and DVD drive. The CPU sensor reports the CPU temp as 32 degrees F- which is clearly wrong, unless Apple has been installing little refrigerators inside.
    So thanks to Bodomann for posting- Hats off and three cheers to Derman and Cristoph for source code.
    http://www.derman.com/iMac-Fan-Control
    http://www.lobotomo.com/products/FanControl/index.html

  • HT1338 Left hand side of monitor dims on 2011/intel based iMac-any suggestions?

    Left hand side of monitor dims on 2011 /intel based iMac-any suggestions? Called apple support. Restarted-didn't help. Unplugged my second monitor from the thunderbolt port-didn't help. Unplugged center cord in the middle on the back of the monitor-waited 15 seconds, restarted, held down option-command-p-r and this didn't help. Apple support thought that it was most likely a video card/hardware issue, but would like to hear of any other trouble shooting suggestions.

    Not a hardware issue, since it shows up in a screenshot. Please boot in safe mode, launch Safari, and test. Same problem?
    Some things won't work in safe mode, possibly including wireless networking.
    After testing, reboot as usual (not in safe mode.)
    Mac OS X: Starting up in Safe Mode

  • Major problems with my new intel g5 imac

    I recently purchased a the new Intel duo imac (20", 512 ram). The computer has been a total nightmare and I finally have a little bit of time available to hopefully start addressing some of the major issues. When I first got the system, I easily hooked it up and starting using it, everything appeared to be fine. However, I began to notice almost all the applications were unstable and always lagging. For example, the pinwheel idle icon would come up for seconds at a time while switching from safari to itunes on the bottom dock. I installed CS2 on it and realized it was barely useable, it would always crash at least once or twice during a session. The application itself was so slow, it was painstaking just to clone or resize an image. I was really frustrated at this point because the system ran extremely slow compared to my 4 year old PC, which ran photoshop and the internet flawlessly. I thought that maybe I needed to start updating the OS, because I was always prompted to do so when I would start the system up.
    I was hoping maybe the updates would make the system more stable and fix the problems I was having. I went ahead and approved all the updates to the OS etc. The update on the OS was around 190 megs, so I went to dinner and came back. When I got home it told me the updates where complete, I just needed to restart. Upon restarting I was met with a flashing Apple, the system would not allow me to get into the OS, it was stuck at start up with a flashing apple with an X through it. I did nothing but download the updates and restart. After an hour of trying to boot up in every why possible, I finally had to boot from CD, nothing solved the problem (disk repair etc). I finally had to break down and reinstall the OS.
    Now I am back to square one again, the system is useable but every application is painfully slow. I can't for example, Use Safari, listen to itunes and type in Word. It has to be one or the other, if not the lag is unbearable. Photoshop CS2 is once again barely useable, when you start the application up you can literally read every name that comes up in the splash screen because it goes so slowly (on my PC all that start up info flew by so fast I couldn't make out any of it).
    I am at my wits end with it because I love the system I just need it to be functional. I was on some other forums and people suggested I had bad ram, but I have no way to test if the ram is actually bad. Others said I was a moron for trying to run CS2 on a intel mac because it barely works (go figure). They said my only option to running decent applications like photoshop consistently was to install boot camp then windows. I don't want the solution to my problems to be the installation of an OS that I am trying to move away from, because of its supposed inferiority. I think it's sad that people need to install windows just to run photoshop and/or any software with high requirements because the new Intel mac does such a poor job. I know I need to update the system and the OS, but I don't want to have to reinstall and lose everything if it fails upon restarting again. I want things to stop crashing out of no where. Can someone please help me.
    Some screen captures of some crashes.
    http://i51.photobucket.com/albums/f384/brad561/crash1.jpg
    http://i51.photobucket.com/albums/f384/brad561/Picture1.jpg
    PS: I Xbenched my Imac I got a score of 50.05 the average for all is 65.48 Why is that?
    Respectfully,
    -sb

    I do know that it is easy enough to test the RAM yourself to a fairly good degree.
    Memtest is simply the best ram-testing utility for the Macintosh platform with the ability to find intermittent memory problems that are the frequent cause of unexplained crashes or freezes in Macs running MacOSX. Memtest can identify random memory problems that commercially available utilities miss completely.
    Memtest 4.13 is now distributed as a universal binary. Just double-click the OS X image file to mount it and then double click the package file to install. Besides providing support for the new Intel-based Macs, version 4.13 also adds improved status reporting for each of the individual tests.
    http://www.memtestosx.org/
    Memory: 512MB is very minimal. Meaning programs may not have enough to load into memory or take advantage of OS X memory management. Rosetta is almost a mini-OS but very RAM hungry. If you can, I would add another 1GB of memory at a minimum. But first test what you have now.
    Also, do run Apple Hardware Test fully as well.
    In a very rare case, it could be the disk drive itself that just needs to be erased.
    Have you tried repairing your disk drive from the Install DVD? good idea. And backup your system and files to FireWire goes mostly without saying as essential.
    If your system does do a forced shutdown/freeze, I would not rely on it repairing itself, I like to boot into Single User Mode (command + s) and run the fsck routine.
    CS3 will not be out for -?- 9 months or more and then be "Universal Binary" format. Until then, well, CS2 is itself memory hungry and people buy G5s etc so that they can use 4GB RAM or more.
    The ideal would be to upgrade to 2GB RAM, Micron/Crucial or Samsung as well as RAMjet, some place reliable and that warrants their memory fully. I don't think you'll be happy with just the 512MB. And everything was fine to begin with, so that's good.
    And there probably are some special concerns with Photoshop, with plug-ins or other applications, or just a corrupt plist/pref file.
    Without "adequate" or enough memory, any OS is going to page itself to death, 'thrashing' as it is unable to page into memory enough to run properly.
    OS: 80-200MB
    Safari or web browser: 80-400MB
    etc.

  • HT1758 Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion?  My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB", mine starts with a "W." Purchased direct from Apple August 2007.

    Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion?  My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB" and mine starts with a "W." Purchased direct from Apple August 2007.

    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    Open System Profiler and report what you find displayed for the Model Identifier.

  • Hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

    hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

    On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
    http://liondiskmaker.com/
    Then boot from that on your computer and install
    You need an internet connection to install via Recovery mode

  • I have an Intel based iMac that has just developed two small spots on the screen. One 1/8" circle at bottom and a tiny circle at top.  The fading on and off light isn't working anymore either.  Does anyone know anything about this?

    I have an Intel based iMac that has just developed two small spots on the screen - they look light brighter spots on the screen. One 1/8" circle at bottom right and a tiny circle at top right.  The fading on and off light on area surrounding the screen isn't working anymore either.  Has anyone else had similar problems?  Any solutions?  Thanks!

    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • 2007 intel based iMac has the white screen of death with the mouse visible?? WHATSUP

    My 2007 Intel based IMAC has the white screen of death with the mouse cursor as the only visible item.  What is up with this?  Is this the equivalent of the windows blue screen of death?
    Doug

    Read the "More Like This" thread links located at the bottom left of this page.

  • Cloning Old iMac G4 HD to new (not Intel) G5 iMac HD????

    I have a 3yr old white round-base, flat panel iMac and need to replicate my 60gb hard drive to a new 160gb G5 (not Intel version) iMac flat panel hard drive??? I plan to connect the 2 via a Firewire cable, then transfer the hard drive contents..any recommendations on how I should do this? Any input would be appreciated...Thanks!

    Hi,Several different options including:
    Target mode. Switch off the iMac G4. Connect the two machines via FW. Boot the iMac G4 holding down 'T'. You'll then enter 'Firewire Target Mode'. On the iMac G5 the iMac G4's hard disk will appear underneath Macintosh HD (but will be coloured orange) - I'd rename them to something other than Macintosh HD to avoid confusion. You can then drag and drop at your will. Just drag the orange icon to the trash when you're finished and hold in the iMac's power button to switch it off.
    Use Tiger's Migration Assistant that automates and guides you through the above. MA will copy about 99% of your settings/documents/applications, icon positions, desktop picture, dock items etc. But most users notice a few errors/items not working properly - hence why I say 99%. MA can be found in Macintosh HD > Applications > Utilities > Migration Assistant.
    HTH
    mrtotes

Maybe you are looking for

  • Data migration b/w r11 and r12

    Hi, the place i worked have boht R11 & R12 intances, i need to move some clients (shared service cnetre) from r11 to r12. In terms fo data i.e. AP, AR & GL. i need to find a quick way around. My concern is 1) should i just move the Open POs if yes /n

  • Multi-room DVR Issues: Unable to locate hub, interrupted recording, skipping during playback

    Hi Guys, I was wonderng if you could help me.   I have been a FIOS customer for many years and have a multi-room HD DVR and 2 HD set-top boxes.   I have always had some problems during playback on some recordings where the picture and sound will skip

  • Buffering. Can I do anything to my computer to reduce or eliminate this?

    I don't understand buffering. Recently, I watched a video that lasted 20 minutes with no interruption of any kind. This is not uncommon. On the other hand, sometimes the video stops every few seconds and the screen says "buffering". Why is it that so

  • Apps not showing in Creative Cloud window?

    I started downloading from Creative Cloud downloader....all good. Opened and used Photoshop....all good. I then realized that I had downloaded too many apps that took up all my space on C drive. So I unistalled some apps from the programs folder, and

  • Nokia lumia 800 volume problem

    I can't turn my volume up or down. I think its something to do with the buttons because sometimes I can turn it up. Other times I try and it will turn it down. This does my head in as my volume is now stuck on 10/30