Intel Graphics Display Controller [Solved]

I like to spend time trying to understand my installation. In my investigatiosn I found the following:
# lshw -C display
*-display:0
description: VGA compatible controller
product: Mobile 4 Series Chipset Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 07
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:45 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:40f0(size=8)
*-display:1 UNCLAIMED
description: Display controller
product: Mobile 4 Series Chipset Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: 07
width: 64 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=0
resources: memory:d2400000-d24fffff
does this "*-display:1 UNCLAIMED" mean that the device is not used and lacks the correct driver?
Thanks
Andrew
Last edited by fdservices (2013-01-13 13:26:04)

That means you only have one display device connected, so unless you have two connected, just ignore it.
If you look under description you will see that one is VGA and the other is the display adapter.
Regards.
Andrzej
Last edited by AndrzejL (2013-01-13 13:31:09)

Similar Messages

[Solved] Compositing malfunctions (KDE, Intel graphic card)

Screenshots:
As you can see, there's no transparence. It's as if there was a black window behind. Also, when moving a window:
Notice the different color for the window border, and the black pixels at the corners.
The overall performance is very poor but I don't know if that's expected
00:02.1 Display controller: Intel Corporation Mobile GME965/GLE960 Integrated Graphics Controller (rev 0c)
Anyone else experiencing this?
Last edited by Butcher (2010-12-22 22:34:16)

toketin wrote:@Butcher which intel-dri driver are you using?
7.9.0.git20101207-2
toketin wrote:And have you tried to disable Blur effect?
Yes, it works fine now Thanks.

Windows Update for windows 7 won't update the Intel Corporation - Display - Intel (R) HD Graphics

Hi there, a couple of times the windows update on my windows 7 won't update the Intel Corporation - Display - Intel (R) HD Graphics.
What could be the problem?
How can this be solved?

Hello palette35,
Welcome to the community.
You’re having problems with windows not updating the graphics.
It could be security setting blocking the update
You can go to HP.com and download the driver directly.
Here is a link to the site. You’ll need your product number.
Let me know if this helps.

Intel Graphics Accelerator Display Driver for Windows 10 - L505-S5984

Mozilla Firefox will not stay, or open up, on my computer, AFTER the Windows 10 upgrade. An error message, constantly, appears, after my computer screen keep blinking to a black screen, before a BLANK box stay on the black screen ... and FREEZES everything. The computer curser, also, disappears. Obviously, this driver was not updated dring the upgrading. "Display driver Intel Graphics Accelerator Driver for Windows 7(R) stopped responding and has successfully recovered." Is there a fix, or Windows 10 driver update, for this?

MissBliss, I just ended up un-installing it, and re-installing it, again; which I will tell you is difficult to get done. It kept telling me that I already have the most recent one ... where it was installed/updated when my computer was updated to Windows 10. I, actually, played around with it, for like 2 days, trying to make it happen. Anyway, only some things seems to be working, now. I still can't try to open Firefox; without that black/blue screen flashing, and, then, finally, freezing ... my computer crashing. I, finally, just un-installed Mozilla Firefox on my computer that this keeps happening on. I still want to return to Windows Home Premium; everything was working so beautifully, when I had it. Personally, I wished that I have never reserved the Windows 10 app. They made it sound so great, when promoting it. I, now, understand that saying 'BEWARE of fox in sheep clothing,' more. There seems to be NO help from Microsoft; and no willingness to, even, help/solve, by Microsoft. I will admit that two of my computers that were upgraded seems to be doing okay ... although, the Windows 10 upgrade, did, make ALL but one printer, connected to them, AND the one that I am having problems with, inoperable. My computers do not, even, recognize them, or their drivers, as being installed. Everything as working just fine, before Windows 10 came along. So, this makes me angry, also. Good Luck with finding/getting an answer, THAT WORKS! I hope that you have more success, than I did. Windows 10 is becoming more and more of a disappointment.

X200 Intel graphics update today hosed external display

I'm running Windows 7 on my X200. So far its worked well. Today, however, TVSU (v4.0) installed an update to the Intel graphics driver (GM45 display driver, 32 bit, v8.15.10.1968) and now my external monitor is virtually useless. It's a Samsung 181T (1280x1024) and it was connected and in use at the time of the installation. After rebooting the monitor is so dark it's unreadable.
This is disappointing. I use my unit docked in an Ultrabase connected to a monitor and I need this to work properly.
It looks as if the system now detects the external monitor as having a resolution of 1280x800, instead of 1280x1024.

As an update to the previous message: the monitor was previously detected and workd as a Generic PnP monitor. I've now dug out an old CD and installed the driver for it. The monitor is now correctly listed by make and model and the screen resolution defaults correctly, but at no resolution is the problem of the horrible display any better, neither using the Ultrabase nor the VGA output on the side.
My external display is unusable.
I would like to roll back this update but the option to do so isn't offered.
So far all of my TVSU updates have been flawless. This is really no fun at all.
it seems I am not alone: http://communities.intel.com/message/73840
i don't understand the fix referred to at the end of that thread:
go into BIOS and disable the Intel VT-d
I do not see an option to disable anything in the BIOS relevant to the display.
Help please!

Windows 7 Control Panel Display and Intel Graphics Media Control Panel Constantly

I have a Nvidia NVS 5200 M running with Intel 4000 and Windows 7 on a Lenovo T430S.
Whenever I load the Control Panel -> Display settings, I can see options just fine, but I click on any of the drop down menus and they appear for a second, then immediately disappear (fast enough that I can't change settings).
There's a similar problem when I look in the Intel Graphics Media Control Panel. It constantly appears to be "loading" - the mouse icon turns into a little blue circle off an on, continuously. Similar thing with the settings, too - they appear and let me change them, but immediately return to the original setting. I can change them if I act SUPER quickly to make the change then click Apply. But 99/100 I'm not fast enough.
All drivers are up to date. I have no idea what to do (reinstall or uninstall this Intel Graphics control panel? How? Or somehow change a setting on my graphics card).
Please help!

Try uninstalling both drivers, then reinstalling them. Sometimes a clean driver update works better.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

I can't install Intel graphics driver for HP Pavilion G6 2240SH under Windows 8.1

HI!
I installed Windows 8.1 Update 1 x64 to my HP Pavilion G6 2240SH laptop. I started install the drivers and I got an error message in the Intel High-Definition setup: "This computer does not meet the minimum requirements for installing the software."
Intel HD driver version: 10.18.10.3277
Can anybody help me to solve this problem?
Thanks,
Spatrik
This question was solved.
View Solution.

Hello Spatrik,
I have read your post on how your notebook computer is displaying an error message that your updated driver does not meet your system requirements, and I would be happy to assist you!
The first step I recommend is to remove the Intel graphics driver, as well as removing the chipset drivers from Programs and Features. These chipset drivers will be named Intel Chipset Installation Utility and Driver, and Intel Management Engine Interface (MEI) Driver. Once the drivers are removed, please restart your computer.
When the computer powers back on, please download and install the following drivers:
Intel Chipset Installation Utility and Driver
Intel Management Engine Interface (MEI) Driver
Intel High-Definition (HD) Graphics Driver
Once these drivers are re-installed, please follow this document on Using HP Support Assistant (Windows 8). This should help in updating your computer's Intel drivers.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

KDE4 compositing no longer works with Intel graphics card

I recently upgraded to the new intel graphics card drivers and when I started KDE4, I got a black screen. I disabled compositing through the kwinrc file, but I want it back! Here's my xorg.conf
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AIGLX" "true"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "intel"
# Driver "vesa"
VendorName "All"
BoardName "All"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
and my Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-ARCH x86_64
Current Operating System: Linux michael-laptop 2.6.24-ARCH #1 SMP PREEMPT Sun Feb 10 15:44:59 CET 2008 x86_64
Build Date: 26 January 2008 09:52:13AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 12 11:23:12 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(==) |-->Input Device "<default pointer>"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7b0560
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 14c0,0026 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2a02 card 14c0,0026 rev 0c class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,2a03 card 14c0,0026 rev 0c class 03,80,00 hdr 80
(II) PCI: 00:1a:0: chip 8086,2834 card 14c0,0026 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 14c0,0026 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 14c0,0026 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2843 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,2845 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:5: chip 8086,2849 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 14c0,0026 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 14c0,0026 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2815 card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 14c0,0026 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 14c0,0026 rev 03 class 01,06,01 hdr 00
(II) PCI: 00:1f:3: chip 8086,283e card 14c0,0026 rev 03 class 0c,05,00 hdr 00
(II) PCI: 04:00:0: chip 14e4,1713 card 14c0,0026 rev 02 class 02,00,00 hdr 00
(II) PCI: 0c:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: 0e:06:0: chip 1180,0832 card 14c0,0026 rev 05 class 0c,00,10 hdr 80
(II) PCI: 0e:06:1: chip 1180,0822 card 14c0,0026 rev 22 class 08,05,00 hdr 80
(II) PCI: 0e:06:2: chip 1180,0592 card 14c0,0026 rev 12 class 08,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,14), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xc0000000 - 0xc3ffffff (0x4000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xcc000000 - 0xcdffffff (0x2000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:1), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:28:2), (0,6,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[b]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:3), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 8 I/O range:
[0] -1 0 0x00005000 - 0x000050ff (0x100) IX[b]
[1] -1 0 0x00005400 - 0x000054ff (0x100) IX[b]
[2] -1 0 0x00005800 - 0x000058ff (0x100) IX[b]
[3] -1 0 0x00005c00 - 0x00005cff (0x100) IX[b]
(II) Bus 8 non-prefetchable memory range:
[0] -1 0 0xb8000000 - 0xbbffffff (0x4000000) MX[b]
(II) Bus 8 prefetchable memory range:
[0] -1 0 0xc8000000 - 0xc9ffffff (0x2000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 10: bridge is at (0:28:4), (0,10,10), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 12: bridge is at (0:28:5), (0,12,12), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 12 non-prefetchable memory range:
[0] -1 0 0xf8200000 - 0xf82fffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 14: bridge is at (0:30:0), (0,14,14), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 14 non-prefetchable memory range:
[0] -1 0 0xf8300000 - 0xf83fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8000000/20, 0xd0000000/28, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8100000/20
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[1] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[2] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[3] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[4] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[5] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[6] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[7] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[8] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[9] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[10] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[13] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[14] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[15] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[16] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[17] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[18] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[19] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[1] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[2] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[3] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[4] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[5] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[6] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[7] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[8] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[9] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[10] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[13] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[14] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[15] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[16] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[17] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[18] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[19] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[20] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[21] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[22] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[23] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[24] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[30] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[31] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[32] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[33] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[34] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[35] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specifiedin the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified inthe config file.
(II) "glx" will be loaded. This was enabled by default and also specified inthe config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specifiedin the config file.
(II) "dri" will be loaded. This was enabled by default and also specified inthe config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 965GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[20] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[21] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[22] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[23] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[24] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[30] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[31] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[32] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[33] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[34] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[35] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[23] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[24] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[25] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[26] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[27] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[28] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[33] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[34] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[35] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[36] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[37] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[38] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF8000000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7616 kB
(II) intel(0): VESA VBE OEM: Intel(r)Crestline Graphics Chip Accelerated VGABIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)Crestline Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing on
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MS[b]
[1] 0 0 0xf8000000 - 0xf80fffff (0x100000) MS[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[7] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[8] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[9] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[10] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[11] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[12] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[13] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[14] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[15] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[16] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[17] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[18] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[22] 0 0 0x00001800 - 0x00001807 (0x8) IS[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[25] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[26] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[27] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[28] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[29] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[30] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[31] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[34] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[35] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[36] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[37] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[38] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[39] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[40] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[41] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[43] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238592 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 954364 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(==) intel(0): VideoRam: 262144 KB
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Success.
(II) intel(0): [drm] Registers = 0xf8000000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0xd0100000
(II) intel(0): [drm] mapped back buffer at 0xd1a00000, handle = 0xd1a00000
(II) intel(0): [drm] mapped depth buffer at 0xd2040000, handle = 0xd2040000
(II) intel(0): [drm] mapped classic textures at 0xd2680000, handle = 0xd2680000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xd0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
(II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
(II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
(II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
(II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(**) Option "dpms" "true"
(**) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard0: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1304 1336 1408 800 801804 813 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) 3rd Button detected: disabling emulate3Button
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
(II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
(II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
(II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
(II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0x2fff9000
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) <default pointer>: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
Last edited by miggols99 (2008-02-12 14:50:38)

Maybe it is this bug: http://bugs.kde.org/show_bug.cgi?id=154969
The decisive effect is 'Improved window management' - if this effect is enabled kwin works normally.
Last edited by May-C (2008-02-13 01:16:48)

T520 with Optimus - Can't install Intel Graphics Driver in XP

Hello,
I have T520 with Optimus FHD screen.
I have XP installed in my Ultrabay HDD.
I understand that XP doesn't support Optimus and that I must go to BIOS and choose either Discrete or Integrated.
OPTION 1 (Discrete Only) Which someone what works:
- So, when I have Discrete enabled in BIOS - and installed Nvidia Drivers in XP - everything works fine, expcept on 90% initial boot ups after going from Win 7 to XP (F12 Options) - I assume the NVIDIA driver doesn't get initially recognised and the XP boots up in non native resolution.
- It's only after I restart again and use (F12 again) to pick Ultrabay with XP, the Nvidia gets properly loaded. But this time, there is a prolong delay (60 to 90 seconds) of black screen after the WIndows XP Welcome screen before the desktop appears.
OPTION 2 (Intgrated Display Only) - Of couse, this after uninstalling NVIDIA Graphic Driver in XP
- In BIOS, Integrated Graphic in choosen.
- XP boots up in basic resolution.
- I download (From Lenovo T520 Driver Page) - Intel Integrated Driver for Win XP 32.
- When I try to install it, it says "The computer doesn't meet the minimum requirements for installing the software"
- BTW, I do have all the WIndows Updates including NET 3.0 and higher
- So then, I try to forcibly installed through Device Manager and Having DISK - but I get Error message.
- But somehow, it works after.
One guess I have and that confuses me is the Otimus Graphic Card - where maybe it can only work with either Optimus Drivers in Windows 7 or Nvidia Drivers in Windows XP. And that the Integrated Intel HD Graphic Drivers in for XP on Lenovo website are only meant for T520 with Intel Graphics ??!!
Or can optimus be used with intergrated intel drivers only in the XP?
If anyone can shed a small light, I would be grateful.
Thanks You
Solved!
Go to Solution.

Glad to know everything is working for you.
You shouldn't need the discrete to watch flash videos, the Intel integrated should be able to handle that on its own.
The nVidia card shouldn't be running at all when the machine is in integrated . In fact it doesn't even run in Optimus except when it is actively being used. nVidia proved this when it was first demoing the technology. nVidia removed the nVidia chip from the motherboard of an active system that was running in Optimus using only the integrated graphics, and the computer kept running without issue and the power consumption was the same with and without the chip on the board.
If you really wanted FireFox to always run with the nVidia card (again, I don't know why you would want this) you can change the settings in the nVidia control panel to force FireFox to run with discrete.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Intel graphic adapter

i have a hp 630 notebook, intell core i3. i installed a fresh windows 8.1 os. but couldnt find graphic driver for my device. i downloaded intell hd graphic driver and after installing, i get a message that my device doesnt have minimal requirement to install the driver. i have tried different version of intel graphic driver but the message is the same. i have tried to trouble shoot but to no avail. can you please help me out. i am currently on microsoft basic display adapter.

Hi Bennykym,
Thank you for your query. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Commercial/ More Sharing Services Subscribe Notebook PCs - Pavilions, Presario.
The support page for your product may be helpful in the meantime: HP 630 Notebook PC
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Odd shadowing effects in XFCE with dual monitors and intel graphics

Linux fowie-desktop 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010 i686 Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz GenuineIntel GNU/Linux
lspci shows:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
not using an xorg.conf
rc.conf (snippets)
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/Denver"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!usblp vboxdrv !saa7134 saa7134-dvb)
DAEMONS=(syslog-ng dbus hal @network @netfs @crond @alsa @cups @sensors @samba @ddclient @sshd @httpd @mysqld @smartd)
and my .xinitrc:
/usr/bin/xrandr --output VGA1 --left-of DVI1 --output DVI1 --mode 1920x1080
exec ck-launch-session startxfce4
Xorg.0.log at http://pastebin.ca/1925313
If I use the xf86-video-intel driver from extra, the xrandr command to do dual-outputs fails and I get both monitors showing the same desktop (mirrored mode). I switched to use AUR's xf86-video-intel-git (reading the forums it said this would fix the dual-monitor issue until extra moves to 2.12.0-2) and I do get the dual monitors working propery with the xrandr command, but I'm experiencing wierd effects. For every unminimized window on the desktop, if I put another window in front, the shadow of the window below stays on top of the window containing the focus. Hard to explain, so I'll use a photo:
That's what it looks like with xf89-video-intel-git, libdrm-git, dri-git, and anything else git and intel graphics related I can find. Any ideas what's wrong, or what I would even call this problem so I can look around and see if anyone else is having the same issues?
Last edited by fowie (2010-08-25 20:21:53)

Ok, I went into the XFCE4 setting manager and opened the "Window Manager Tweaks" module, Under "Compositor" if I disable display compositing the shadowing effect is gone, making the display much more usable (thanks!). But now compositing does not work. Guess I'll go report this to XFCE, or is the XFCE compositing manager handled by someone else?
Last edited by fowie (2010-08-25 23:11:54)

Driver intel graphic for windows 7 32 bit

Dear Hp expert,
I was install windows 7 32 bit for my HP 14-d039tu. Processor Intel Celeron CPU N2810.
I have got problem at display driver (graphic). I was check at device manager, see below information
Details
Standard VGA graphic adapter
Harware lds
PCI\VEN_8086&DEV_0F31&SUBSYS_218D103C&REV_0A
PCI\VEN_8086&DEV_0F31&SUBSYS_218D103C
PCI\VEN_8086&DEV_0F31&CC_030000
PCI\VEN_8086&DEV_0F31&CC_0300
Please help me how to find intel graphic adapteR for windows 7 32 bit.
Thank you
This question was solved.
View Solution.

Hi:
See if this driver works...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23889
Download, unzip and run the setup exe file.

Intel Graphics chip question

I've got a MBP with the i7 Processor. 15" model. I also got the upgraded 1680x1050 screen too.
Just tonight, when I turned on my machine it powered up normally, flashed the desktop and then went to a fuzzy/snowy screen. Kinda like snow on an old television set that's not getting a signal but with no movement or flickering. I get the pointer but that's it.
When I restart the machine connected to an external monitor via mini display port, all's fine. When I unplug the external screen it goes back to the same screen issue.
When I restart with external monitor, then turn off the auto graphics switching option in the energy saver system preference panel, all's fine, I can unplug the monitor and use my MBP screen. I can use it with the built in nVidia chip, but not the intel. Any one else have troubles with this?
I just updated the system with the latest software update which had a graphics thing in it, but that did not solve the problem. It seems that my intel graphics chip is dead. Any help or guidance is much appreciated.
Brent

It is a new Macbook Pro 15" i7. I did a complete reinstall and unfortunately my Time Machine Back up does not have before I installed Air Display. Still does it. Even with the new update.
Also reinstalled Air Display just to try and uninstall it - no luck
Also tried PRAM reset it stays on a blue screen after start up (Apple with spinning wheel).
Still works with Nvida but the moment I switch to Dynamic it goes to that screen. I did a reinstall with out my applications from Time Machine...Intel works. Of course I have to rebuild everything.

T500 Intel Graphics Anomalies with a side of BlueTooth

Greetings,
I have my system configured to use the Intel Integrated graphics (set to internal in the bios to save power) and I am experiencing the following graphical problems. I am running the latest bios and display driver from Lenovo, as provided by ThinkVantage System Update. Details of the drivers are in the directx diagnostics below. I have tried to install the latest Intel graphics driver from Intel's website for this chipset, but it says that my system is not supported (possibly something to do with ATI's Hybrid Graphics).
This does not occur in OpenSUSE 11.2 (even with the 3D Gnome desktop), but it does in Windows x64 with Aero. It usually occurs after watching SlingBox or NetFlix Instant View, but it has occurred in the past without those activities.
It has not occurred when using the ATI graphics adapter (set to dedicated in the bios), at least from the limited amount that I have made use of it.
Model: 20828zu
DirectX Diagnostics (full system / driver specs):
http://home.comcast.net/~quako33/MISC/DxDiag.txt
Screenshots of the problem:
http://home.comcast.net/~quako33/Images/gpu_problem1.png
http://home.comcast.net/~quako33/Images/gpu_problem3.png
Any ideas on how to resolve this without having to switch over to the ATI graphics adapter will be appreciated.
Finally... the bluetooth question... any keystroke to disable only the bluetooth? When I hit fn+f5, it disables the wifi and the bluetooth. A way to disable it in OpenSUSE 11.2 Gnome (like I can in Windows) would accomplish the same goal.
Thanks
Solved!
Go to Solution.

It's a bug in the drivers. If you have 2+1GB or 2+4GB of RAM memory this will occur. Did you try to disable Aero? It might help. From what I understand the only way to fix this issue is to buy another 2GB module (2+2GB), or wait until a new graphics driver is released.
Regarding the Bluetooth;
Make sure you have Lenovo Hotkey Installed (If you have ran Lenovo System Update you probably have this installed).
Navigate to "C:\Program Files\Lenovo\HOTKEY" and open "TpFnF5.exe" and hit the "Settings for Fn + F5" button.
I must admit I didn't really get if you had the Fn + F5 issues in Windows or OpenSUSE, but the behavior for Fn + F5 under Ubuntu 9.10 is:
WLAN/BT/OFF toggle (Fn+F5 press once: Wlan and BT off/Press second time: BT off, Wlan on/Third time: BT on, Wlan off/Press another time: BT and Wlan on)
If that is of any help to you.

Urxvt -depth 32 / Intel graphics = input lag

I have a very strange behavior with urxvt at color depth 32: when I press a key and wait for it to repeat and release it, then the last input lags for about one second. For example, moving in a terminal/vim, the cursor stops when I release the key, then moves one second later. Same thing with mouse scroll. If I set depth to its default value, it works just fine.
Does anyone have this annoying problem?
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
xorg-server : 1.9.2-2
xf86-video-intel : 2.13.0-4
rxvt-unicode : 9.09-1

The i915 isn't a graphics powerhouse - what are you comparing with when you say its slow? Glxinfo says direct rendering is enabled and your Xorg log looks ok.
Try sudo gpasswd -a <username> video to add yourself to the group for /dev/dri/card0. Logout and back in and see if that helps.

Intel Graphics Display Controller [Solved]

Similar Messages

Maybe you are looking for