Intel HAXM and Hyper-V are they mutually exclusive?

Hi all, if you have Intel virtualization turned on and HAXM installed it appears that Hyper-V won't install. And, if you have Hyper-V installed you cannot install HAXM as it says that virtualization is turned off or is not present.
http://stackoverflow.com/questions/13285682/android-sdks-intel-haxm-disabled-after-installing-hyper-v
Is Microsoft aware of this and if so do they care? I know that developing for WP8 is great. But I also like to develop on android.
Thanks, -ja

>Is it possible to get an Android Virtual Device to run on Hyper-V?
I don't do Android development, but if there's one that runs on an intel
x86 processor, then maybe.
>Can I get Windows phone emulator to run on Genymotion/VirtualBox?
I believe so, googling windows phone emulator and virtualbox, you get a
number of how-tos. I haven't tried to do it personally though.
>Or if I have HAXM running on another machine on the network with WP Emulator/Hyper-V running on my main dev box can I remote into the networked Emulator?
I don't know HAXM at all, you'd have to ask the developers of it, but I
know you can do it the other way around. Access a Windows Phone emulator
running on a machine with Hyper-V. It's a bit tricky to set up but it
works. Not sure Visual Studio could use it directly though.
Bob Comer

Similar Messages

What are ROWID and ROWNUM? Are they stored in database and where?

Hi All,
can anybody please answer this question
What are ROWID and ROWNUM? Are they stored in database and where?
Thanks,
Srini

ROWID can be thought of as a pointer to the physical location (on disk) of the (table) row.
From a ROWID value, Oracle can extract the file, block-within-that-file and offset-of-the-row-within-that-block. Using these, Oracle can directly access a disk block to retrieve a row.
ROWNUM is a just sequence number of a row within a result set of a query.
As said by other repliers, both are not stored. They are 'constructed' when you reference them inside a query.

Yosemite 10.10.2 server app. FTP help. I have a program running in my local server enviroment that wants to FTP to my mac folder. It asks for the server , name, password, port and path. what are they?

So I have set up a localhost area in my Mac. I have the new server.app and I am running yosemite 10.10.2 .
I have a program running in my local server enviroment that wants to FTP to my mac .
It asks for the server , name, password, port and path. what are they?
I am pretty certain that the Serveris "localhost",
Name is my macs name (like my-mac-min)
password is "my login password"
and they suggest port 21.
But what is the file path, lets just say my site is set up http://localhost/siteftp and is actually at my Users/Sites/siteftp folder.
Why cant this program connect to the mac.
Is it because they are both operating in the same localhost enviroment,
could it be my folder permissions are not correct on siteftp folder?
Help please !

I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on.

Service Contract and Service Quote, Are they two different application or s

Service Contract and Service Quote, Are they two different application or same application ?
What is the difference ?
thanks
siva

Siva
There is no application called Service Quote (But we can have services in the quoting lines).
Thanks
Nagamohan

I have an iMac, where are the completed print jobs stored on the iMac and what format are they?

I have an iMac, where are the completed print jobs stored on the iMac and what format are they?
My OSX is 10.10.1

Hi
If you are using standard system or HP drivers, than the jobs contents are not saved at all.
You can see the list of completed jobs per printer via this URL: http://127.0.0.1:631/printers/
If you want to save a print job, you can do it in the print dialog, by selecting an action prom "PDF" popup.
It allows to save a job (prior or instead to printing it) as PDF or PostScript.

Itunes show duplicate, 1 with icloud and 1 without. are they both on hard drive?

itunes shows duplicates - 2 with icloud and 1 without.
are they both on hard drive?
which ones should i delete?

iTunes Store: Transferring purchases from your iOS device or iPod to a computer
The should then show in your iTunes library. They are not anywhere else.

Hyper-v cannot be installed: A hypervisor is already running: VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation

When I try to go to Control Panel\Programs and click on turn windows features on/off and , it shows ticks on hyper-v is removed.
Hyper-v platform Is grayed out and When i move the mouse point to Hyper-v platform it shows a message.
"Hyper-v cannot be installed: A hypervisor is already running"
When I try to install vmware it says..
VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation..

I dont feel you can do this. I have also tried what you tried and ended up with a failure.. So had to stick with vmware in one instance and for other instance hyper v...
For further details raise your question here http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
and
https://communities.vmware.com/community/vmtn/developer/forums
Good luck..

ChangeEventPolicy vs partial triggers - are they mutely exclusive?

Under section 24.4.3 of the 11.1.2 Fusion Guide, the guide has the following to say about the changeEventPolicy property:
"When you create a form, setting up PPR to work for all the components in the form can be time consuming and error prone. To alleviate this, you can set the changeEventPolicy attribute to ppr on value bindings. Doing so means that anytime the associated component’s value changes as a result of backend business logic, the component will be automatically rerendered. You can also set an iterator binding’s changeEventPolicy to ppr. When you do this, any action or value binding associated with the iterator will act as though its changeEventPolicy is set to PPR. This allows entire forms to use PPR without your having to configure each component separately."
Fair enough, this property can save us setting up our own partial triggers.
What isn't clear to me, is are they mutely exclusive? If changeEventPolicy is set to PPR, can we/should we still use partial triggers on the same page? I ask because I know it's easy to accidentally setup a circular partial triggers scenario which causes the application to break, so presumably with a combination of changeEventPolicy=PPR and partial triggers the same problem can occur.
Does anyone have any opinions or advice to share please?
Thanks,
CM.

changeEventPolicy=ppr affects only fields that are databound to binding attributes associated with this certain ppr'ed iterator.
If you have other UI components that are dependant on some databound fields but do not bind to such, they will not be notified of changes unless they point to them using partial triggers. This usecase still requires partial triggers.
One will also need to use them and change changeEventPolicy to none if he or she has some advanced field dependency where some fields have require update only after certain field is changed or in a specific order.
Change event policy also alters other behaviours significantly. I am not sure if this is what should happen, bet if you have a form for a record including some af:selectOneChoice components bound to required attributes, ADF will warn user about them after EACH edit of any field that binds to a PPR'ed iterator. Let's say you have 4 af:inputText's and 4 selectOneChoice's. User gets 4 messages 4 times - after each inputText loses focus. And each of the messages will warn about 4 fields (soc'es) that "must have a value". This is certainly annoying to users.
There are many more cases where changing changeEventPolicy to none solves mysterious problems - dependant LOV's, showPrintablePage or other "operation" behaviours.
And yes, ppr'ing everything imposes notable impact on performance. Though I can't prove it easily, but it really feels different on weblogic instances running in slow machines (say 4 years old laptop).

Jumper SW1 and SW2, where are they?

I have a 2100+, and my KT4 Ultra is only recognizing it as a 1500+. I know it is because the FSB is set to 100, but when I try to change it to 133, my computer dies hard, and I have to clear the CMOS and start over. But printed on the MB is a table that says I have to set Jumper SW1 and SW2 to 1-2 in order to change the FSB successfully. But I couyld not find any jumpers anywhere on the board that weren't audio or the clearing CMOS one. Where are they? Is there some other solution to my problem?
Help!!! I have been looking for a relavent answer to this question for the last two weeks. (and yes, my power supply is fine...)

I am experiencing the same problem. I have an Athlon XP 2600+ barton (333mhz), and every time I try to clock the CPU at the factory speed, it will shut down.
I also noticed the FSB jumpers on the motherboard, and did some experimenting with the jumper settings on 1-2 and 2-3 for a 166MHZ fsb. After I set this and change the fsb in the bios to 166mhz and a multiplier of 10-15 it reports clocks speeds from 850mhz-933mhz?!
My question is for the KT4 ultra does the fsb have to be set through jumpers and bios, or just bios?
-kid

Flash ActiveX and NPAPI - what are they?

I see two things in Control Panel/Add Remove Programs
Adobe Flash Player 16 ActiveX
Adobe Flash Player 16 NPAPI
I don't use special software or anything, I just have Google chrome, IE and firefox... do I need these two software, and what are they please?
I ask since recently I had bsod and want to see the cause. Also firefox crashes.
Thanks

Flash Player for NPAPI is Flash Player for Firefox
Flash Player for ActiveX is Flash Player for Internet Explorer
Flash Player for Chrome is built directly into the browser, so there's nothing separate to install or download.

DSC 8.6.1 run-time and LV2009 executable are they working together ?

Hi All,
In my application I first deploy shared variables and when they all have depleoyed the main application starts. My deployment procedure is something like that:
0. Select first library
1. check if library is already running on SVE
2. if not deploy it
3. check next library
Most of my variables in libraries are connected to OPC variables. OPC server is located in other computer and there is a LAN network between computers. I have noticed that when I execute my application exe only few of libraries are deployed to SVE. Eg. If I remove all processes(libraries) from SVE and start my application only 7/28 libraries are deployded. If I deploy those libraries manually from LV2009 project everything is okay.
On my computer is installed LV2009 development and DSC 8.6.1 run-time. Our target is remove LV2009 immediately after we have edited and tested all our variables and libraries. Is there a potential risk that application which is made on LV2009 don't work with DSC run-time 8.6.1? Have anyone else noticed problem when deploying variables from application exe?
BR, Jim

Meg K. B. ,
It sounds like you are experiencing Time Stamp Counter (TSC) Drift as mentioned in the KB's for the AMD Multi-Core processors. However, according to this wikipedia article on TSC's, the Intel Core 2 Duo's "time-stamp counter increments at a constant rate.......Constant TSC behavior ensures that the duration of each clock tick is
uniform and supports the use of the TSC as a wall clock timer even if
the processor core changes frequency." This seems to suggest that it would be not be the case that you are seeing the issue mentioned in the KBs.
Can you provide the exact modle of the Core 2 Duo processor that you are using?
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Mac os x and Sony Ericsson are they compatible

I have a Cellphone Sony Ericsson W41S, I plugged to iMac 20" PPC and tried to sync it, no luck. How can they communicate with each other? Any solution?
Thank you
Luis
20 iMac G5 PPC 1GB Ram Mac OS X (10.4.5) iBook 500, 784 Ram

Apple has a compatibility list for phones that work together with isync:
http://www.apple.com/macosx/features/isync/devices.html
But there are quite some phones that are not on the list but work anyway. So i think your SE phone should be able to connect to your mac.
But as you can see on the bottom of that site, SE phones can only connect via bluetooth to the mac. So if your phone has bluetooth built in, you should try this.

HR Qualifications and Proficiencies how are they related ? Which table ?

Hi all
People have qualifications, qualifications have proficiencies, proficiencies have proficiency scales.
Table HRP1001 contains personel numbers and the qualifiation objects that are related to them.
Table HRP1000 contains loads of objects including the qualifications IDs with object type 'Q'.
Table T77TS holds the Proficiency IDs and text.
Table T77TP holds the Proficiency Scale IDs and Texts
But where (which table) is the relationship between the qualification and its accociated proficiency stored.
In short I am trying to report on people with a particular proficiency level for a particulat qualification but can not make the link between qualification and proficiency. It must be stored somwhere !
cheers hugh

Hi
Just to qualify, I'm looking at qualifications associated with an employee, not those associated with a post so I don't think they are in IT0024.
from Volkers post...
"OTYPE P (person) related to OTYPE Q via RSIGN = A and RELAT = 032
and OType Q is related to Person via B 032"
But what links OType Q or A 032 to a proficiency and proficiency scale ?
cheers Hugh

Session timeout and session.invalidate() -- are they the same?

I was just wondering when a session timeout occurs (either by setting the session-timeout in web.xml or the server's default timeout), is the session automatically invalidated? Or should we call setMaxInactiveInterval() instead? Or is calling session.invalidate() the only way to invalidate a session?

Hello all,
Both are same in terms of functionality, but if you use both of them like
1: You specified the tag sessionTimeout and
2: in your program the session.maxInactiveIntervalTime( value ) here if the value is(we gave it in terms of seconds like for 40 minutes we give 2400) then the program code will override the value previously set in web.xml
Thanks
Prabhakar

Vista and Solaris 10, are they compatible?

I have attempted to follow dual boot guides found everywhere, but none tailor specifically to (or eve mention) Vista. This is a problem, because Vista does not use the same method of boot as previous versions of NT.
So far, in my many failed attempts at creating a Vista dual boot, I have experienced this:
When I install Solaris 10 on any partition (Solaris installs correctly and works great), and then attempt to install Windows Vista, Vista says all of my partitions do not meet its requirements for installation (that the drive is NTFS and at least 12 GB is all it tells me). Even after formatting, deleting, recreating, and reformatting a drive, the drive is still unusable. Only after deleting ALL drives, including Solaris 10, and recreating and brand new first partition does Vista allow me to install. If I create a partition that Vista allows me to use, and also a partition to use with Solaris, and THEN install Solaris, the partition that Vista liked can no longer be used!
When I install Windows Vista first (and it works fine) (which is what I tried first and reasoned is what I should be doing), and then install Solaris 10 on a partition (it installs correctlt and works great), I load up my computer and go into the GRUB bootloader. I can select Windows. However, when attempting to load windows, I get an error (in the Vista font by the way) that says my operating system cannot be loaded. When I load my Vista install disc, it cannot find any installations of windows, and it cannot repair the master boot record, saying something like the filesystem is corrupt. However, just as an experiment, I loaded Vista onto the former Solaris drive, and looked at my first partition. Every file was there, intact.
I have attempted this with Windows Home Premium 32 bit, Windows Business 32 bit, and Vista Ultimate x64. I don't want to believe that it's impossible to load Vista and Solaris simultaneously, I've seen as much stating its impossibility as I've seen documents telling me how to do it (<- cold irony).
As long as I can get AN INSTALLATION of Solaris 10 on my machine at the same time I have Vista able to boot, I'm fine, but I seem to have lost on all fronts.
Edited by: ZetaZeta on Sep 19, 2007 12:30 AM

In Solaris Express, this is not an issue, according to this weblog:
http://blogs.sun.com/moinakg/entry/solaris_vista_dual_boot_conclusion
For versions of Solaris Express prior to buid 70, this method was described for creating a dual-boot with the oh-too-picky Windows Vista:
http://linux.wordpress.com/2007/02/17/vista-and-solaris-express-dual-boot/
I am going to assume that setting up a dual-boot with Solaris 10 is similar to, if not the same as, Solaris Express, since the only steps specific to Solaris are the files I copy from Solaris.
I hope this helps anyone else with a problem similar to mine.

Intel HAXM and Hyper-V are they mutually exclusive?

Similar Messages

Maybe you are looking for