Intel HD Driver issues when downgrading from Win8 to Win7

Hi Guys,
I currently have a bunch of HP Pro3500MT machines which have come preinstalled with Win8 on these and after checking with HP they stated that these are compatible to be downgraded to run on Win7.
The install works fine up until the point where the Intel HD drivers are installed and this then causes the pc to BSOD with and IRQ is not equal error. (I will add the dump files shortly)
Has anyone experienced this with these machines?
This question was solved.
View Solution.

Hi:
I have seen instances on other HP business desktop PC's where this happens when you install W7 (non SP1), and then try to install the drivers before updating W7 to SP1.
If this is what you did, the solution is to install W7, update it to SP1 before installing any drivers and that should work.
If this is not your situation, then I would try the Intel HD video driver directly from Intel.

Similar Messages

Downgrading from Win8 to Win7 envy 17-j021nr drivers needed

I have a customer who is running some software that doesn't like win8 so I am downgrading his new envy17 to win7. I've managed to get all of the other drivers installed and working but it doesn't seem to matter which additional drivers I try to download from other models I can't seem to get the realtek wired lan to work, the usb controller, or the synaptics touchpad. Does anyone know which drivers will work for this model.
Thanks for your help, it's greatly appreciated.
This question was solved.
View Solution.

Hi:
You should be able to use all of the drivers and software from this model, except the wireless.
When you go to install the graphics, you have to install the Intel HD graphics driver, reboot and then install the nVidia graphics driver.
DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6521...
Wireless: The second driver listed is for 64 bit.
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23491&lang=eng&OSVersion=Windows%207...
Bluetooth: Second driver is for W7 x64
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3507&DwnldID=23450&ProductFamily=Wire...

Portege Z930 - Few questions after downgrade from Win8 to Win7

Hello,
I recently purchased Z930 PT234E with Win8 pre-installed. Due to company policy, I needed to downgrade it to Win7 Pro 32Bit (deleted all partitions and created one partition as normally should be done). I downloaded all drivers for OS and installed. And everything started after that;
1- I'm trying to install TOSHIBA Smart Client Manager but returns with warning "+Before you start setting up TOSHIBA Smart Client Manager Client, copy an action masthead file for TOSHIBA Smart Client Manager Server to the setup folder.+" and I don't have that file and installation fails. *Where can I have this file for a succesful installation?*
2- You have +hwsetup+ software preinstalled on Win8 but I couldn't find that sw / driver, even for Win8 at download pages of Toshiba *Where can I get this sw as it gives ability to configure BIOS without waiting for boot?*
3- I see that the battery is +used+ while I left my device on hibernate. I unplug it from power adaptor after %100 charged and hibernate it. But after few hours, when I turn it on, I see it is %91! I susbect it is becuase of "+sleep and charge+" option is enabled from BIOS but I need to wait for next boot. *Any comments?*
4- If I purchase the recovery media online from Toshiba, will this help me to install Win8 as in first boot and create the deleted partitions as in "+*factory state*+". In other wprds, will this recovery media will set my z930 to factory state with OS and partitions. +OK, I assume this media is a DVD and I know that I need to create a bootable USB from this media...No worries :)+ .
Really thanks for reading and comments / replies :)

> 1- I'm trying to install TOSHIBA Smart Client Manager but returns with warning "Before you start setting up TOSHIBA Smart Client Manager Client, copy an action masthead file for TOSHIBA Smart Client Manager Server to the setup folder." and I don't have that file and installation fails. Where can I have this file for a succesful installation?
This file is not known to me and usually something like that should not appear if you would install the software in the right order.
Before you would start to install any of the Toshiba software you have to install Toshiba Value Added package for Windows 7!
Only if this VAP has been installed and notebook rebooted, you could follow with other tools.
> 2- You have hwsetup software preinstalled on Win8 but I couldn't find that sw / driver, even for Win8 at download pages of Toshiba Where can I get this sw as it gives ability to configure BIOS without waiting for boot?
System driver package which is available for Win 8 is NOT available for Win 7.
Instead of system driver you have to installed VAP!
> 3- I see that the battery is used while I left my device on hibernate. I unplug it from power adaptor after %100 charged and hibernate it. But after few hours, when I turn it on, I see it is %91! I susbect it is becuase of "sleep and charge" option is enabled from BIOS but I need to wait for next boot. Any comments?
Any comments? The Sleep & Charge option as well as other options like Wake Up on LAN or keyboard may discharge the battery. So in case you dont want that, disable this in BIOS
> 4- If I purchase the recovery media online from Toshiba, will this help me to install Win8 as in first boot and create the deleted partitions as in "factory state". In other wprds, will this recovery media will set my z930 to factory state with OS and partitions. OK, I assume this media is a DVD and I know that I need to create a bootable USB from this media...No worries .
Yes

Downgrading from win8 to win7

I want to degrade from windows8 to windows7 .... but i m having a hard time installing the graphics driver as this laptop has a dual graphics. Kindly help me with the drivers.

What is the installed graphics module? If it is one of those in the following list:
AMD Radeon HD 7670M
AMD Radeon HD 7520G
AMD Radeon HD 7660G + 7670M Dual Graphics
AMD Radeon HD 7640G + 7670M Dual Graphics
Then you can use the switchable graphics driver from the g6-2005ax notebook. It has the same chipset on the systemboard as yours and that will make it compatible. The direct link is the following URL
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103954-1&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Pci network adapter on Thinkcenter EDGE 3484-jpg - win7 downgraded from win8

I need add an extra nic on Thinkcenter EDGE 3484-jpg, computer is natively win8 and uefi boot downgraded (from lenovo) to win7 pro. Tring 2 different network controller pci-e 16x - intellinet - startech pex100s systems freeze while loading bios; removing nic i can access uefi bios but i don't find any option to disable/enable pci-e slot (also disable uefi bios). With same computer model bought some month ago (born with win7 and old-style bios) i have no such problems. Lenovo phone helpdesk told me the network card are not compatible, but they don' t know any pci-e nic who run on this hw. Do you have any hint?

Hi:
Yes, you can burn the files to a CD and use those to install the drivers you need.
You need to install the AMD Chipset and USB 3 drivers which are not on your notebook's support page.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_117181_1
Download and install both of these drivers for the usb...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=40...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=40...
Reboot after each installation.
PCI E/D Controller: Not on your notebook's support page.
Run this file and then manually install the driver.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_133833_1
To manually install the driver, go to the device manager and click on the PCI E/D Controller needing the driver.
Click on the driver tab, click on update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file.
That folder will be located in C:\SWSetup\sp66974. Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
Ethernet Controller:
Realtek Local Area Network (LAN) Driver
File name: sp69625.exe
PCI Device:
Realtek Card Reader Driver
File name: sp69619.exe
I don't know what model wireless card your model uses, so if you still need the wireless card driver (Network Controller), please do the following steps so I can figure that out and then I will post the link to the wireless card driver you need...
To find the hardware ID, go to the device manager and click on the device labeled Network Controller.
Then click on the Details tab at the top of the Network Controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the second item (Hardware ID's).
Post the top string of characters you see in the window.

JMS issues when migration from weblogic 9.2 to 10.3.5

We are facing some issues when migration from weblogic 9.2 to 10.3.5
In weblogic 9.2 :_
BMP Entity EJBs used in our project are read-only in nature using entity cache, below is the configuration details
<!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN" "http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd">
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>
Company
</ejb-name>
<entity-descriptor>
<pool>
<max-beans-in-free-pool>300</max-beans-in-free-pool>
<initial-beans-in-free-pool>150</initial-beans-in-free-pool>
</pool>
<entity-cache>
<max-beans-in-cache>3500</max-beans-in-cache>
<idle-timeout-seconds>100000</idle-timeout-seconds>
<read-timeout-seconds>0</read-timeout-seconds>
<concurrency-strategy>ReadOnly</concurrency-strategy>
</entity-cache>
Entity beans will get refreshed using the JMS messges. with in the MDB descriptor files(weblogic-ejb-jar.xml) we are using the provider URL directly and XA enabled connection factory is set to false.
migration to Weblogic 10.3.5_
With the same configurations MDB are not not getting deployed in weblogic 10 with some exception, so we removed the provider URL from weblogic-ejb-jar.xml and changed the JMS configuration to use foreign JMS and XA enable connection factory is set to true. Now when ever the JMS message is triggered Entity bean is not getting refreshed with the updated values. i.e values are stale.
Can some one look into this and provide your inputs to resolve this issue.

I think the Entity bean refresh problem appears to be unrelated to MDBs. The MDB is only responsible for getting the message to your application (which in turn interacts with Entity beans). You might want to try posting your question to an EJB newsgroup.
Tom

Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

I installed OS X Lion v10.7.3 because of the following claim.
The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
Resolve a Wi-Fi connection issue when waking from sleep
It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
Does anyone have a suggestion for the resolution to this problem?

It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
Here are some things to try.
1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

Resolve a Wi-Fi connection issue when waking from sleep

Hi,
In the recent release for Mac OS X Lion 10.7.3 "Resolving a Wi-Fi connection issue when waking from sleep" was supposed to be resolved, not so at my end. Has anyone else encountered the same issue and if so will there be a resolve.
Thank you

Hello BGreg and thank you for your answer,
I have alreadty read about this solution, and tried it.
I downloaded the 1.2 Go file, and applied it. And repaired permissions.
Everything went fine.
Unfortunately, it didn't solve the problem.
Meaning that when iMac wakes up, it doen't join my WiFi network.
I have to do it manually.
I don't know what to do : it is very strange because I never had that problem with OS 10.7.2 !
And my network setup has never changed.
another info :
I noticed that in the network setup screen, when I want to close the little lock to restrain further modifications, it won't close. Weird !
Do you think I should call Apple Assistance ?

Internal Hard drive dismounts when downloading from iTunes Store?

I am having an issue when I download content from the iTunes Store to my Mac Pro.
I have my Media Library on the second Internal Hard drive (an Hitachi). When I download content after a while -usually half-way through a download or after a few minutes if its large amount to data/content (App updates etc) -the second internal hard drive will dismount. Stopping the download and making the disk inaccessible.
The internal hard drive seems to be fine otherwise. It has plenty of space and I use it as a scratch disk for video editing HD content.
To re-mount the disk, I have to do a complete shut down, remove the hard disk (I check for dust/damage etc) and re-insert and re-start the system. If the systems down not pick up the hard drive the first time I try and again and it usually recognized then. I have tried using an external hard drive as well (not sure what make the hard disk is but its an iomega unit) and the same thing has happened.
As you can imagine this is very annoying. I hve a work around currently where I set-up a tempoary Media Libabry on my system disk and download anythin I want from iTunes and then manually move the content to the second drive-not ideal but it works. I have had this issue for a year- so I have been very patient and hoping it would get resolved through updates-as I am sure there ha to been other people with the same issue.
Can anyone help me identify where the problem is? Has anyone else experienced a similar issue? I am stumped and really not sure where to start.
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3 GHz
Ram: 4GB
Mac OS X 10.6.8
iTunes 10.5.2

Hello Nesquik,
Yes, I did notice it too. A lot of noise when downloading, It sure looks as if there is no buffer or not enough buffer. Going back in history when there was no smartdrive
I hope they can fix it, very annoying. Not only because of the noise, but I also get the feeling that my harddrive must be degrading. If you only could say that you want to download on a different location (choosing the SSD) and afterwards moving to the Media Folder on a normal harddrive.
Samsung 1Tb disk.

Mid 2009 17" MacBook Pro battery shutdown issue when waking from sleep.

My unibody 17" MacBook Pro occasionally shuts down on waking from sleep when it isn't plugged in.
When I open the lid to wake it I can hear the hard drive and fans starting to spool, and then the next second it's off and silent. The laptop doesn't mind being turned on again after it does this and might go a week without doing it again, equally it might do it next time I try and wake it from sleep. It does this regardless of battery charge level.
coconutBattery says the battery still has 86% of its designed capacity, and I haven't noticed anything else untoward regarding battery charging or performance when in use.
So my question is two fold:
1) Does it sound like the battery's internal processor is malfunctioning, or could it be something else?
2) If it is the battery's internal processor, will replacing the battery replace the processor, or are they fitted separately (in defference to the 'internal' part of its name)?
Cheers,
James
nb. just in case it makes any difference, the laptop is a 17" Mid-2009 MacBook Pro, 2.8GHz Core 2 Duo with 4Gb Ram running OSX 10.7.3

James
I have had issues when i press the space bar from sleep, sometimes it wakes but others i'm forced to power it on with the power button.
Is this similar to anything you've experianced?
Its so inconsistantly these days, but i'm also connected to an external screen.

Since updating to Lion the iMac won't recognise the external hard drive (maxtor) when waking from sleep mode,

Hi All, Since updating to Lion, my imac won't recognise the ext HDD (Maxtor) when waking from sleep mode, I have tried another port, diisc utility (Ext HDD not listed in here) but nothing works. I now find that I have to restart the imac to get the drive recognised..which is fine until the imac goes into sleep mode then I lose the drive and have to restart etc etc.....anyone suffering same issue. The Ext Drive worked perfectly until the upgrade..

Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

Drive sound when waking from sleep?

Hi, I am getting a short 2-3 second drive sound when I wake my MBP from sleep. It sounds like it is checking to see if there is a disc in the drive or something. Also might be described as the sound when your first put a disc into the drive(but maybe shorter). Is this normal? And also if it is normal is there a way to stop it from making the noise because I actually find it annoying me, I wake my computer from sleep a lot throughout the day. My friends MBP who bought his just a few months before mine does not make a sound when waking from sleep. Thanks.

They all do. All of them. Yours. Mine. Your friend's. Old PowerBooks. Brand new MBPs. Everything in between.
My friends MBP who bought his just a few months before mine does not make a sound when waking from sleep.
Maybe his optical drive is broken?
Or, more likely, it's not waking up from sleep at all - Energy Saver settings can be used to set the display to sleep before the MBP sleeps - a key press will "wake" the display, but the MBP itself was not asleep, thus no noise from the drive when it the display is reactivated.

Snow Leopard - Latency issues when waking from sleep

I own two macs ('09 mini and unibody macbook), both of which connect wirelessly to an airport extreme N router. Since upgrading to Snow Leopard I have been dealing with terrible latency issues when the computers wake from sleep. Ping times from local servers increase from around 23ms to 220ms and webpages load slowly. A quick reboot solves the issue. Connecting directly to the airport extreme with a patch cable also solves the latency issue so I know it's just with wireless.
Has anyone else experienced this problem since upgrading and, if so, what are you doing to solve the issue?
Edit: Samples of ping times...before and then after a reboot:
BEFORE:
Ping has started…
PING www.l.google.com (64.233.169.147): 56 data bytes
64 bytes from 64.233.169.147: icmp_seq=0 ttl=238 time=306.921 ms
64 bytes from 64.233.169.147: icmp_seq=1 ttl=238 time=227.929 ms
64 bytes from 64.233.169.147: icmp_seq=2 ttl=238 time=149.819 ms
64 bytes from 64.233.169.147: icmp_seq=3 ttl=238 time=70.753 ms
64 bytes from 64.233.169.147: icmp_seq=4 ttl=238 time=299.572 ms
64 bytes from 64.233.169.147: icmp_seq=5 ttl=238 time=221.037 ms
64 bytes from 64.233.169.147: icmp_seq=6 ttl=238 time=142.583 ms
64 bytes from 64.233.169.147: icmp_seq=7 ttl=238 time=63.197 ms
64 bytes from 64.233.169.147: icmp_seq=8 ttl=238 time=292.738 ms
64 bytes from 64.233.169.147: icmp_seq=9 ttl=238 time=214.157 ms
--- www.l.google.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 63.197/198.871/306.921/85.201 ms
AFTER:
Ping has started…
PING www.l.google.com (xxx.xxx.xxx.xxx): 56 data bytes
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=0 ttl=47 time=46.076 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=1 ttl=47 time=45.177 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=2 ttl=47 time=44.649 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=3 ttl=47 time=46.317 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=4 ttl=47 time=45.886 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=5 ttl=47 time=45.180 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=6 ttl=47 time=45.899 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=7 ttl=47 time=46.236 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=8 ttl=47 time=45.281 ms
64 bytes from xxx.xxx.xxx.xxx: icmp_seq=9 ttl=47 time=44.900 ms
--- www.l.google.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 44.649/45.560/46.317/0.561 ms
Message was edited by: mikespug

I use Ethernet so I cannot comment but have you tried trashing the airport pref.plist and removed the preferred networks in the network set up in System Preferences and then set up the wifi connection again?
This seems to help with a lot of airport problems on this forum.

Transparency issues when printing from Illustrator CS5

I recently designed a flyer for an event that a group of artists and I are doing as a not-for-profit organization that we started, to help clean up the area and promote the arts.
When I print the file (saved as an AI), the colors are bold, the font is crisp, and everthing overall looks fantastic, apart from this "box" around some of the elements I have created/added to the file.
When being printed from an exported jpeg format, the boxes are not present, but the image overall is of lesser quality (i know it's from being compressed to a jpeg), and the colors are not as bold.
I only have a black & white printer, a Brother MFC-7220. I only found out this issue when my curiousity got the best of me, and printed it to see what it'd look like on paper (8.5"x11") before we sent it off to the print shot. This is when I noticed the problem.
The elements which have this box around them were edited in Photoshop CS 6 (trial), where I had (at least thought), disposed of each elements background, so I could import them into AI as objects, without any background.
The files were edited in PS in new documents with a transparent background, saved as a PSD, then "opened" in Illustrator where I simply copied the object and pasted into the AI file I was working in. I've tried recreating/re-adding the elements from PS back into AI with the same issue.
The image also looks perfect on my screen, no boxes whatsoever. I've tried playing around with printer settings, transparency/raster settings, but the only thing I can get close, is the low-quality jpeg file. This problem also happens when exporting to a PDF, which is what I typically use for my printing format from AI.
Any ideas what's going on here? The pictures linked below show a photo of the AI and the jpeg, and a screencap of my desktop as the AI stands right now. The jpeg export has a few minor changes to it, but are still otherwise the same. The only items that are "supposed" to have this, are the logos for our sponsors in the bottom-left corner.
I'm stumped, nothing is working that I've read about, and I need to get these printed as soon as I can! Any help would be appreciated - please keep in mind I'm a novice when it comes to AI/PS, I know mostly basics.
[url=http://s1286.beta.photobucket.com/user/em0te-apparel/library/AI%20Print%20Issue]PICTURES[/url]

I, too am having the same issue printing from AI CS5. I have edited images in PS CS5 and there is a transparent background. I then placed (File>Place) the PSD files into AI and everything looks good on screen. However, I'm also getting a strange box that appears around my images—though the box itself isn't a solid opaque—it looks more like there's a overprint or screen and so it just shifts the colors behind it. I've tried saving the images as transparent PNGs with the same result. I've also tried playing with my transparency settings in the print dialogue to no avail.
Strangely this is only occurring when I print at 100% size. I came upon this by happenstance when I accidentally printed a copy at 75% and everything was fine. If anyone has any insights, it would be much appreciated. Thanks!

Abap issues when upgrading from 4.7 to ecc6.0

hello All,
I am posting this question with intention of general issues we face that are abap related when upgrade from 4.7 to ECC6.0,
do the programs ahve to be adjusted, if sumone cud also throw some light on what is unicode and wat role does it play in the upgrade,
some specific examples wud be appreciated
thanks,
RS

hi,
Go through this
Unicode is an international standard that assigns characters from virtually every
language and script a unique Unicode Scalar Value, which is a number written in
hexadecimal notation.
     Character     Unicode Scalar Value     Unicode Character Name
     A      U+0041          LATIN CAPITAL LETTER A
     Ä     U+00C4          LATIN CAPITAL LETTER A WITH DIAERESIS
     α     U+03B1          GREEK SMALL LATTER ALPHA
Implementing the Unicode standard enables a single software product or a single
web site to be accessed across multiple platforms, languages, and countries without
the need for re-engineering. It allows data to be transferred across many different
SAP and non-SAP systems without corruption. To meet these requirements, the SAP
Unicode team continues to promote Unicode-enabled SAP systems, aid their
installation, and provide tools and full technical support for the smooth
conversion of existing SAP non-Unicode systems to Unicode.

Intel HD Driver issues when downgrading from Win8 to Win7

Similar Messages

Maybe you are looking for