Intel HD graphics cannot use more than 256M

Hello,
I want to play Bastion (http://chrome.supergiantgames.com/) in chromium browser on my laptop Acer TimelineX 5820TG. The system uses integrated intel HD graphics (i5 420m arrandale). When loading the game I got this error: Bastion requires a graphics card with at least 256MB of VRAM. I guess integrated GPU gets needed memory from RAM and I have plenty of free RAM (currently -/+ buffers/cache: 796MB 2836MB).
Here's lspci -vvv output:
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device 035d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d8000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4050 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
Thanks for any help.

What lspci says is not relevant. There are special tricks required to access more video ram. The graphics driver knows about them, lspci does not. The error message of the game is misleading (probably a generic message), the actual issue is something else.

Similar Messages

[VIA] Via K7-266 Pro2 - System crashes if use more than 512 MB of memory

Cannot use more than 512 MB of memory or system crashes. After running without a problem for over 2 years with 1 GB of memory installed, system started intermittent crashing, generally after 5 to 30 minutes of use. I worked with the system manufacturer's tech support and they determined that it must be a motherboard problem. I am hoping to find another fix rather than replacing motherboard. System details:
MB: Via K7-266 Pro2 (MS 6380)
OS: MS Windows XP Update 1
Bios: V3.6
I've used Norton Systemworks and Norton Anti-Virus to keep system clean, and SpyBot and Adaware to clean adware
During troubleshooting, we found that it will run with 512 MB of memory without problems, but not with the 1 GB I had installed. My memory was 2 x 256 MB installed with the machine and 512 MB I purchased from Crucial and installed. Computer ran over 2 years with all memory installed without a problem. After the problem started and during troubleshooting, we found that any combination of 512 MB worked fine (either the 2 x 256 MB or the one 500MB chip), apparently in any arrangement of slots. But as soon as I went to higher memory, I was subject intermittent crashes.
Could not ID the source of the crash. It sometimes happened when I was working with a single program open (various programs from IE to Excel to playing at GameSpy), had multiple programs open in background, or even when computer was sitting idle with only the startup programs active.
During troubleshooting we also did a complete re-install of Windows XP, updated the bios to V3.6, and checked bios settings, but the problems persists.
What else could be the problem?

I am beginning to suspect a PSU problem. I neglected to mention in my first post that when the system crashes, it does not freeze but has intermittent reboots.
I ran the memtest86+ test first on the two old sticks of memory then on just the one new 512 MB stick; both passed the test. I also used the Prime95 stress test on both sets, and both ran without incident.
I used PC Alert to report CPU and case temperatures during the stress test. The results maxed at 54 and 41 degrees respectively during the first stress test and 46 amd 39 degrees during the second test (I think part of the difference was due to a lower ambient, room temperature during the second test.) The voltages reported during both tests were similar and were: Vcore1: 1.71v; Vcore2: 1.26v; +5v: 4.76v; 3.3v: 3.31v; +12v: 11.60v; and -12v: 12.60v. I am not sure if that information is meaningful, PCAlert showed all measurements as within the required range.
I periodically have cleaned the dust out of my computer, so I don't think that is the problem.
I used 2 power calculators with major differences in the reported status of the system. The test from pcpowercooling reported minimum and maximum requirements for my system (with the full 1 GB of memory installed) of 300w and 510w. The alternate I found at jscustompcs (from a recent article about power supplies at Extreme Tech) reported a minimuum of 256w (no maximum is calculated with their tool. The two tools had significant differences for memory, CPU, and PCI cards. Off particular relevance to my problem was the difference in memory requirements; Pcpowercooling calculated memory requirements at 8w per 128MGB while jcustompcs used 12.5 per stick, resulting in different totals of 64w vs. 21w. Which is right?
One item that makes me think it is not the PSU, however, is that the problem would occur with the 1 GB of memory while the system was idle, thus I was not using any of the hardware devices. However, I never experienced the problem while using a device (e.g. DVD, CDRW, or tape drive) - either with 500MB or 1GB of memory.
My power unit is a Power Man #FSP 300-60BTV with 300w output, including +3.3v: 28amps; +5v: 30.0 amps; +12v: 15 amps; +5vsb: 20amps; -5v: 0.3amps; -12v: 0.8amps. It also notes max output of +3.3v and +5v of 200amps.
My system also includes a Leadtek nVidia Geforce 3 Ti400 graphics card, DVD, CDRW, HP 14 GB tape drive, 1 case fan, and 4 PCI cards (modem, network, USB2.0, and Audigy 1). The USB card is connected only to a bus in my Dell monitor and I have not used other USB devices.
Any thoughts or suggestions? Do I need to replace the PSU?

I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use ' ' with more than one recipient the save grays out. Any thoughts?

am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use '< >' with more than one recipient the save grays out. Any thoughts?

I figured it out. I needed to fix some errors in my account information. It works fine now.

Problems when using outlook and outlook express, cannot send more than app 100 KB.

Since app 6 weeks ago we have problems when sending pictures etc, we cannot send more than app 100KB. If we send more there is error code
Socket Error 10053, Error number 0x800CCC0F. Your server has unexpectedly terminated the connection.
I have made no changes to either computer. Restoring the laptop to Nov 2011 made no difference.We use Outlook Exlorer and Outlook.
When I take my laptop to my neighbors house, who has Time Warner, I can send 10MB files without any problems, using the EXACT same settings.
Spending over 2 hours with a very informed Verizon technician on the phone did nothing.
I first blamed our server, turns out the culprit is Verizon.
Any ideas?
Eugene

Good Morning,
Are you able to send attachments on webmail.verizon.net?
Shamika_Vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Cisco AP 1252AG Cannot setup More than 54Mb/s speed in radio 0 (2.4G)

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:SimSun;
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
I have a problem when I configure CISCO AP 1252, it cannot support more than 54Mb/s speed but support 802.n which speed can up to 300Mb/s. See below :
here is dot11radio 0 speed option: (The MAX speed is 54Mb/s by manually, how can i setup more than 54Mb/s, because of this AP support 802.n. So the speed should be more than 54M/s, like 300M)
AP#sho inter dot11Radio 0
Dot11Radio0 is up, line protocol is up
   Hardware is 802.11N 2.4Ghz Radio, address is *************
   MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
AP(config)#inter dot11Radio 0
AP(config-if)#speed ?
   1.0         Allow 1.0 Mb/s rate
   11.0        Allow 11.0 Mb/s rate
   12.0        Allow 12.0 Mb/s rate
   18.0        Allow 18.0 Mb/s rate
   2.0         Allow 2.0 Mb/s rate
   24.0        Allow 24.0 Mb/s rate
   36.0        Allow 36.0 Mb/s rate
   48.0        Allow 48.0 Mb/s rate
   5.5         Allow 5.5 Mb/s rate
   54.0        Allow 54.0 Mb/s rate
***(why here without more than 54M/s rate, CISCO AP 1252 support IEEE802/n)
   6.0         Allow 6.0 Mb/s rate
   9.0         Allow 9.0 Mb/s rate
   basic-1.0   Require 1.0 Mb/s rate
   basic-11.0 Require 11.0 Mb/s rate
   basic-12.0 Require 12.0 Mb/s rate
   basic-18.0 Require 18.0 Mb/s rate
   basic-2.0   Require 2.0 Mb/s rate
   basic-24.0 Require 24.0 Mb/s rate
   basic-36.0 Require 36.0 Mb/s rate
   basic-48.0 Require 48.0 Mb/s rate
   basic-5.5   Require 5.5 Mb/s rate
   basic-54.0 Require 54.0 Mb/s rate
***(why here without over than 54Mb/s Rate?, it support IEEE802.n)
   basic-6.0   Require 6.0 Mb/s rate
   basic-9.0   Require 9.0 Mb/s rate
   default     Set default rates
   m0-7        Allow MCS rate indices 0-7
   m0.         Allow MCS rate index 0
   m1.         Allow MCS rate index 1
   m10.        Allow MCS rate index 10
   m11.        Allow MCS rate index 11
   m12.        Allow MCS rate index 12
   m13.        Allow MCS rate index 13
   m14.        Allow MCS rate index 14
   m15.        Allow MCS rate index 15
   m2.         Allow MCS rate index 2
   m3.         Allow MCS rate index 3
   m4.         Allow MCS rate index 4
   m5.         Allow MCS rate index 5
   m6.         Allow MCS rate index 6
   m7.         Allow MCS rate index 7
   m8-15       Allow MCS rate indices 8-15
   m8.         Allow MCS rate index 8
   m9.         Allow MCS rate index 9
   ofdm        How to place OFDM rates in rates elements
   only-ofdm   Set rates for best OFDM throughput (no ERP protection will be used)
   range       Set rates for best range
   throughput Set rates for best throughput (includes non-OFDM rates and may cause ERP
Why this device cannot support 300Mb/s rate in radio 0 of speed ?
i want to setup more than 54 Mb/s when i use my laptop to connect this AP.

The 802.11n HT rates apply only to no encryption or WPA2/AES encryption. They do not apply to WEP or WPA encryption. If WEP or TKIP encryption is used, the 1250 series access points and any 802.11n Draft 2.0 clients will not transmit at the HT rates. Legacy rates (802.11a/b/g) will be used for any clients using WEP or TKIP encryption.
Ref.: Release Notes
40MHz Operation
If the throughput you get from a 20-MHz channel isn't enough for your speedy users, you can flip each 5-GHz 11n radio into a bonded-channel configuration.
You can configure 40-MHz operation on the 2.4-GHz radio of the 1250 Series AP, but this isn't recommended or supported. The primary reason against it is that with a wide channel in a band that has so little available spectrum (and so much interference), you make a single AP capable of higher throughput at the expense of performance for all neighboring access points-certainly not the way enterprise WLANs ought to be designed. Also, the vast majority of client chipsets (Intel's, for one) will not support 40-MHz operation in the 2.4-GHz space.
Ref.: Cisco 802.11n Design and Deployment Guidelines
Making the Most of Things
Once you're connected at 802.11n HT rates, you'll want to make sure you don't lose the throughput gains you should be able to achieve. Not all may be within your control, but if you understand the performance implications of these variables, it will help you in baselining your WLAN capabilities.
When your laptops are unplugged, the 11n client will likely try aggressively to save battery power. Depending on client radio and chipset, it's not uncommon to see performance drop by as much as 50 percent. Unless you know how to fully disable this, keep your laptops plugged in if you want maximum performance,
Note: Even if you managed to disable this power save function, most laptop motherboards/chipsets have automated power-saving features that kick in when the laptop is unplugged. At best, these are difficult to disable. Thus, it is strongly recommended that you not do performance testing when clients are battery operated.
As detailed previously, throughput performance may vary as legacy devices are introduced into the 802.11n environment. This is to be expected, but make sure that you find a channel void of all legacy transmissions if you want to test the high-water mark of your new 11n WLAN. If that isn't possible, adjust your expectations accordingly.
Ref.: Cisco 802.11n Design and Deployment Guidelines
Regards,
André

How can I use more than one Data Provider in my web Apps

I am trying to use two different data provider in my web apps to run two different queries from the same table ,the data provider A is working correctly but when I attempt to run data provider B ,It display an error page ,here is the error message : Exception Details :javax.servlet.ServletEx ception
java.lang.RuntimeException: java.sql.SQLException : Cannot connect .Both dataSourceName and url properties are null.

Hi,
You can use more than one data provider in your application. However if you have defined a dataprovider for a particular table already, and wish to bind a component, select the component and use its context menu to Bind to Data...

Cannot move more than 2 mailboxes from exchange 2007 to Exchange 2013

I have been trying to move mailboxes from ex2007 to ex2013with the new-migrationbatch and the new-moverequest command.
I have a DAG-cluster with two servers with all roles.
What happens is that I cannot get more than two concurrent mailbox moves. If I restart the MRS-service nothing happens. I have changed the config-file for the mailbox replication service and currently have these settings:
MaxMoveHistoryLength="5"
MaxActiveMovesPerSourceMDB="20"
MaxActiveMovesPerTargetMDB="20"
MaxActiveMovesPerSourceServer="100"
MaxActiveMovesPerTargetServer="100"
MaxTotalRequestsPerMRS="100"
What is funny is that when I start a new batch with autocomplete off, only two mailboxes goes to 95% and the rest of them is not even started.
The command I use is New-Migrationbatch -local -Name TestNew -csvdata ([System.IO.File]::ReadAllBytes("c:\temp\exchange\migration\testmigration.txt")) -targetdatabases mdb001,mdb002 -autostart
Here is the output of Get-MigrationConfig | fl
RunspaceId : d382f8a7-924a-4f0e-812e-f18970b632e2
Identity :
MaxNumberOfBatches : 100
MaxConcurrentMigrations : Unlimited
Features : MultiBatch
CanSubmitNewBatch : True
SupportsCutover : False
I have off course restarted both servers and services.

Just out of curiosity, on which server you made these changes? Mailbox or CAS? And on Target or Source Server?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Cannot run more than one instance of a remote app in remote desktop services Server 2012

All,
I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done. We may have 12 or more students accessing and trying to run the Olyvia application
at any one time.
All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time. That is, when I start up "olyvia" on a Mac, it works great. If I leave it up and running, and then try
and start up "olyvia" on an iPad (using different accounts), I get the following error message:
"Cannot run more than one instance of this program simultaneously. Either the program is already running, or it has not been terminated completely."
I need to understand the root issue.
1. Is this a licensing issue? So, I need to add some CALs to the RDS server?
2. Is this a application issue with "olyvia"? So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
3. Did I not "publish" the application correctly?
4. Is this happening because I followed the "quick start" guide?
Appreciate any help I can get on this. We have no problem getting CALs, I just need some help with the root issue.
Thanks,
Geoff Weatherford
CVMBS, CSU

Hi Geoff,
Each application uses different techniques for determining if multiple instances are running. If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
In the best case you really should direct your question to the maker of Olyvia. The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why? Is it related to Licensing?
Compatibility? If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
-TP

Can I use more than one version of Adobe Reader on an iPad, 8.1 touch and 11.1

Can I use more than one version of Adobe Reader on an iPad adobe Reader Touch and Reader 11.1 . . I use Acrobat XI Pro although I had some old files that were stored on adobe.com from a prior version of acrobat 9 student edition.
I guess the same question for my Surface Pro2 Computer might apply, although I gather from what I read that you shouldn't have two versions of reader on a computer.

If I may add a qualification: on a device running full Windows 8, you may have both Adobe Reader Touch and Adobe Reader (normal desktop edition). This does not apply to the primitive devices which cannot run desktop apps (running "Windows RT"), and while I may be wrong, I believe that the Surface 2 is such a device.

HT6114 I cannot select more than one message at a time to delete from the trash. Any ideas will be appreciated

I cannot select more than one message at a time to delete from the trash. I did not have this problem before I updated to Maverick. What am I doing wrong?

This works in many different ways and in lots of apps.
Hold down the command key and you can select from a list (leaving some not checked) to exclude them from the delete process.
To empty all of the trash folder use command-a keys to "select all" and then the delete key to remove them.

Cannot have more than one Mobile item for a person

Hi,
I cannot have more than one mobile phone item for a person. In India some of them carry dual SIM card phones and both will be valid. In Lumia 800, I dont see an option to add two mobile items. I can do with a work around by choosing one mobile item with Windows Live Account and another with Google Account. But then that is not the right way to do it. If I need it both on same account, then I cannot do it.
This feature is available in all the Android phones. Also i am facing another issue is that Lumia 800 does not sync any mobile item #2 of Google account, so I have to go to Google and manually add that phone number to my phone, which is painful.
Hope Microsoft is listening.
But I really like the way the facebook, SMS and all other chat are sync'ed in one place.
Regards,
-Srinivasan.

The wierd thing is they have duplicates for Home/Work but not for Cell. I have the odd contact that has two cell phones. Really only two work arounds, use one of the other available types as a secondary cell number or what I do is create two contacts, one in Exchange and one on Live. Since my main account is Exchange, I put the secondary number in the Live contact, then on the phone I link the two together. This way I see two cell numbers for one contact.

ORA-01776: cannot modify more than one base table through a join view

I have created EO based on a database view than consists of two tables, and only one is updateable.
When I try to update a row using EO, I got a following message: "ORA-01776-cannot modify more than one base table through a join view"
In Forms, this issue is resolved by setting "Query Only" property of non-updateable items to "True".
Is it possible to do something like that in ADF BC?
Thanks

Thanks for answer.
When I set "updateable" property to "Never", that attribute is protected from any change.
I'm sorry for incomplete usecase.
I have set up a list of value on that attribute, because it is a lookup field for another table and I need to get an ID from that table.
Basically, I need that attribute to be updateble for BC, but not for database.
Edited by: MarioK on Oct 13, 2011 9:28 AM

Cannot modify more than one base table through a join view

hi guys, my current problem is that i have a datablock based on a view, now all the fields bar 1 are updateable, but this one field that is obtained through a join is displayed, the user can enter data in this field which then pupulates other fields which are required, but this specific field should not be updated. Is there an option to state this as i keep getting the error:
cannot modify more than one base table through a join view
Any help would be greatly appreciated, thanks.

the user can enter data in this field which then pupulates other fields So, using the value of "this field" you then query the rest of the fields? Can you show us the code you use to populate the rest of the fields?
but this specific field should not be updatedHave you tried setting the "Query Only" property of the field to "Yes" and the other DML properties (Ins, Upd, Del) to No?
Also, what is your Forms version?
Thanks,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

ORA-24335 - cannot support more than 1000 columns - How to solve this?

Hi,
I got error message 'ORA-24335 - cannot support more than 1000 columns ' when i try to insert x no of rows for a table with following code:
INSERT ALL
INTO tableA Values ('A', 'B', 'C', 1, 2, 3)
INTO tableA Values ('D', 'E', 'F', 4, 5, 6)
INTO tableA Values ('G', 'H', 'I', 7, 8, 9)
SELECT *
FROM DUAL
How to solve above?
What does it really mean? It's not as easy as if my table has 10 columns than I can't insert more than 100 rows (1000 columns divided with 10 columns = maximun 100 rows to insert), or?
Is there a better/more appropriate way to do insert many rows?
Should I do my inserts with an OracleTransaction (My application is developed with C# and asp.net), as ~follows
BEGIN
INSERT INTO tableA Values ('A', 'B', 'C', 1, 2, 3)
INSERT INTO tableA Values ('D', 'E', 'F', 4, 5, 6)
INSERT INTO tableA Values ('G', 'H', 'I', 7, 8, 9)
COMMIT
END
Thx in advance!
Edited by: user8819407 on 2010-mar-07 15:40

Hi,
So how did you solve the problem? Can you please give an example?
I have the same problem inserting over 1000 values into my Oracle DB. The table only has 51 columns but to speed up the insert command, I use bulk inserts via insert all command. I need to insert 100 rows at a time for a total of 5100 values.
Example:
SQLCmd = INSERT ALL INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
SELECT 1 FROM DUAL
SQLVals = 1 22C38299 80700334 04-19-2012 13:55:33 mm-dd-yyyy hh24:mi:ss MCC93000 04/19/2012 13:55:42 mm-dd-yyyy hh24:mi:ss 12 4 0.792191 23 1 0.00 -113.50 13.48 9 1 9
1 36PR7038 8070EDC2 04-19-2012 12:24:35 mm-dd-yyyy hh24:mi:ss MCC60360 04/19/2012 12:24:41 mm-dd-yyyy hh24:mi:ss 7 4 0.757501 3 2 13.88 -114.80 14.06 5 1 6
1 42C63512 8050166F 04-19-2012 16:02:50 mm-dd-yyyy hh24:mi:ss MCC52420 04/19/2012 16:02:57 mm-dd-yyyy hh24:mi:ss 10 4 0.778471 8 1 0.00 -122.30 13.05 8 1 7
1 33MR3076 80803E75 04-19-2012 13:13:16 mm-dd-yyyy hh24:mi:ss MCC60330 04/19/2012 13:13:22 mm-dd-yyyy hh24:mi:ss 13 5 0.636721 28 3 0.00 -122.19 0.70 8 1 6
Then I call: &DBInsert($sqlCmd, @sqlVals);
This is the error I get: ORA-24335: cannot support more than 1000 columns.
I need to insert about 879,500 rows (51 cols per row). The values I read from a text file in sets of about 48,000 and put them into a hash. I tried inserting one row at a time, but it takes too long, about 28 hrs! Then, I tried the bulk update with only 6 rows and the total time was about 25 minutes. Which is acceptable to us.
Thanks!

Intel HD graphics cannot use more than 256M

Similar Messages

Maybe you are looking for