Intel hd graphics on windows 7 problem

boot camp support software does not contain driver for intel hd graphics 3000 for windows.
I have the early 2011 macbook pro 15" which has intel hd grapics 3000 and amd radeon hd 6490M.
I've installed windows 7 home premium 64-bit in my macbook pro.
now my video memory in windows is just 240 MB.
I use windows for gaming.
but video memory here is too low for good performance.
I downloaded a driver from intel official site.
But when i try to install it says "system does not meet the minimum requirements".
But my system has all requirements it asked for.:(
Someone please help me get a solution.
Give me the direct link through which i can download driver for my intel hd graphics.
Does apple provide a direct driver download of intel graphics for windows.??
Thanks a lot in advance.
Pls help me out.

ya you are right.
but will aplle give some updates for installing drivers of intel hd graphics on windows.
its because i use the graphics card only for gaming but mac doesn't support much games and i'm in India so the shops rarely have games for mac for sale.
so i'm forced to do gaming in mac this makes me to need high graphics in windows but the video memory of the radeon graphics low for gaming .
so this makes me annoying.
i hope to get the best from apple's side.
thanks in advance to apple if they give a driver update for intel hd graphics on windows.

Similar Messages

  • Solved: LR6 GPU supported for Intel HD Graphics 4000 (Windows 8.1 64-bit)

    HD Graphics 4000 is supported with latest Intel driver as shown by LR CC (2015) System Info report (text at bottom). Note an older driver (supplied by the laptop vendor) failed the GPU check.
    Chrome browser users: The URL "chrome://gpu" can be used to quickly access detailed driver and monitor information (other information listed is specific to Chrome).
    Is GPU acceleration supported for Intel 4000 with the latest driver? LR6 GPU FAQ requirements below. However, new Intel 4000 driver (Version: 15.33.35.64.4176) incorporates support for DirectX 11.0 (which dates from Windows Vista (see below)), OpenGL 4.0, & OpenCL 1.2 (see Intel® Download Center).
    Note: Intel HD Graphics 4400 supports DirectX 11.2 (may exclude some optional features), OpenGL 4.3, and OpenCL 1.2
    extracted from Adobe Photoshop Lightroom Help | Lightroom GPU FAQ
    Minimum System Requirements
    64-bit OS versions only
    OpenGL 3.3 and later
    Mac OS 10.9 and later
    Windows 7 and later
    Note: Intel 4400 or later required
    Note: GPU acceleration is disabled on Mac OS 10.8
    Note: GPUs running under virtual machines are not tested or supported.
    Intel Information Center
    Intel(R) HD Graphics 4000
    Report Date: Thursday, April 23, 2015
    Report Time [hh:mm:ss]: 1:28:22 PM
    Driver Version: 10.18.10.4176
    Operating System: Windows* 8.1 (6.3.9600)
    Default Language: English (Canada)
    Installed DirectX* Version: 11.2  <= operating system’s DirectX version
    Supported DirectX* Version: 11.0 <= Graphics Driver’s DirectX version
    Shader Version: 5.0
    OpenGL* Version: 4.0
    OpenCL* Version: 1.2
    Physical Memory: 8077 MB
    Processor: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz
    Processor Speed: 1796 MHz
    Vendor ID: 8086
    Device ID: 0166
    Device Revision: 09
    DirectX Versions
    (extracted from How to install the latest version of DirectX)
    DirectX 11.2 is included in Windows 8.1.
    Note There is no standalone update package for DirectX 11.2. You can only install this DirectX version through Windows Update in Windows 8.1,
    DirectX 11.1 for Windows 7 SP1
    DirectX 11.0 for Windows Vista SP2
    Extracted from LR CC (2015) System Info
    Lightroom version:  CC 2015 [1014445]
    License: Expired Trial
    Real memory available to Lightroom: 8077.7 MB
    Real memory used by Lightroom: 339.0 MB (4.1%)
    Virtual memory used by Lightroom: 293.4 MB
    Memory cache size: 0.0 MB
    Maximum thread count used by Camera Raw: 2
    Camera Raw SIMD optimization: SSE2,AVX
    System DPI setting: 115 DPI
    Desktop composition enabled: Yes
    Displays: 1) 1366x768, 2) 1366x768
    Input types: Multitouch: No, Integrated touch: No, Integrated pen: No, External touch: No, External pen: No, Keyboard: No
    Graphics Processor Info:
    Check OpenGL support: Passed
    Vendor: Intel
    Version: 3.3.0 - Build 10.18.10.4176
    Renderer: Intel(R) HD Graphics 4000
    LanguageVersion: 3.30 - Build 10.18.10.4176
    *** Note *** GPU check fails with older Intel HD Graphics 4000 driver
    Check OpenGL support: Failed
    Vendor: Intel
    Version: 3.3.0 - Build 10.18.10.3308
    Renderer: Intel(R) HD Graphics 4000
    LanguageVersion: 3.30 - Build 10.18.10.3308

    This one says 64bits: Intel HD Graphics Driver
    Revision : 01
    Software name Intel HD Graphics Driver
    Support models ThinkPad Edge E120
    ThinkPad Edge E320
    ThinkPad L420, L421
    ThinkPad L520
    ThinkPad X121e, X130e
    Operating Systems Microsoft Windows 7 64-bit
    Microsoft Windows Vista 64-bit
    Refer to marketing materials to find out what computer models
    support which Operating Systems.
    Versions 8.15.10.2827 (Package)
    - 8.15.10.2827 (Graphics Driver)
    - 6.14.00.3086 (Display Audio Driver)
    Support devices Intel HD Graphics Device
    Intel Display Audio
    /L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
    A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
    Comunidad en Español  English Community  Deutsche Community   Русскоязычное Сообщество

  • T410, Intel HD Graphics and Windows Server 2008

    Hi All
    When I run my video drivers with the standard VGA it works fine but I can't use my analog VGA port to a projector or external monitor without changing the BOS settings.  If I install the Windows 7/Vista video drivers for the Intel HD Graphics, it appears to install ok, then, when I reboot, it starts to flash (it appears to be going through various modes) and then eventually comes up with a BSOD.  I have tried the latest version and a previous version of the same driver.
    Any ideas?
    Thanks
    A

    Windows 7 drivers should work, but the applications asociated with the drivers (a.k.a "panel control") won't work.
    Officialy, Windows Server 2008 isn't supported by Lenovo. You can try to enter to Intel's site and checke there if they had published a working driver for your operative system.
    Best regards.
    IPnaSh
    First Spanish Community Guru - Colaborador ad honorem

  • Intel HD Graphics 4400 driver update problem.

    Hi!
    I have an Inspiron 3537 157813. I tried to update to the recommended driver (10.18.10.3316, A02), downloaded from DELL Support, for Intel HD Graphics 4400. But it shows an error message: "The driver being installed is not validated for this computer.  Please obtain the appropriate driver from the computer manufacturer."
    What could I do?

    sorry I do not have an answer, I do have the same problem with this graphics and noticed you had no reply so I thought if I add to it we might get a response from Dell or someone in the forum. I cannot update intel 4400 it is stuck with 10.18.10.3282  (26/08/2013) it won't update to the latest iris even though it goes through the full installation without error, it's the same with any previous update since the one installed, there is always issues with either intel 4400 or AMD 8870m dedicated, any update after 2013 and the AMD is recognised as R9 M270X which it clearly isn't , it doesn't matter if I download the graphics drivers from here or from Intel website itself it just doesn't update, updated chipset and bios and all other hardware and software updates ok Intel 4400 just stays at version 10.18.10.3282, any info would be appreciated ... cheers
    F8ally

  • Solution of dv6-3040ee and 8.1 with vCards Amd mobility radeon HD 5000s and Intel HD Graphics

    With my windows 8.1
    If I setup the two vCards Amd mobility radeon HD 5000s and Intel HD Graphics
    the windows can't open unless I uninstalled one of them
    but I need a solution allow me adjust brighness that not found in AMD card but found in Intel vCard
    and the most of games Intel can run it but AMD can
    Help !!
    Now I'm installing The two cards but if i restarted my laptop it wouldn't run
    The photo show that ...
    http://www3.0zz0.com/2015/04/07/21/289209638.png

    Hi there @ZezoOo 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are looking for help with your video drivers for the adapters in your notebook. Unfortunately, after doing some searching, it appears that Windows 8.1 is not a supported operating system for this notebook. HP customized drivers are only available for the Windows 7 operating system.
    Please see the following, for some guidance.  HP Products - What If I Don't See My Operating System?
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Driver Intel HD Graphics for laptop HP 14-d039tu Notebook PC

    i'm looking for driver intel hd graphics for laptop HP 14-d039tu Notebook PC with os windows 7 x86, please i need Driver Intel HD Graphics for Windows 7 x86.
    This question was solved.
    View Solution.

    Hi:
    This driver should work...
    https://downloadcenter.intel.com/Detail_Desc.aspx?​DwnldID=23889
    Download, unzip and run the setup exe file.

  • Problem installing Intel HD Graphics drivers on HP G62-234DX notebook for windows 10

    HI!I have a HP G62-234DX with intel HD Graphics with the processor Intel core i-3. the driver for my laptop is properly working well on windows 7, but aftering upgrading to windows 10, the driver on intel HD Graphics is not working well. I tried to search for the driver compatible for windows 10, but i could not find the driver from your website. the resolution of the graphics on windows 7 was 1360X738, but now the resolution is 1024X 768.So would you help me install the driver compatible with windows 10?Please help!    

    I think you have Intel 3000 video. Here is official word from Intel. It appears Intel 3000 is not supported: http://www.intel.com/support/graphics/sb/CS-034343.htm What is listed under display adapter in device manager?

  • V570 problem with Intel onboard driver on Windows 7 Pro 64 bit

    Hello Everyone, 
    I recently installed Windows 7 Pro 64 bit on my Lenovo v570. I downloaded the drivers from the support page and I have a strange problem with the onboard graphics driver "Intel Onboard Graphics Driver for Microsoft Windows 7 (64-bit) - Lenovo B470, B570, V370, V470, V570" in the drivers section.
    Installation seems fine, but after restart, the system fails to boot and goes into boot recovery mode, where I get a message saying that booting failed due to a bad driver and the only actual option I have to boot up is to go back to a previous restore point. I tried installing the Nvidia driver for Windows 7, but it says that I need to install an Intel driver first, which is the one that gives me the blue screen when booting. I have also tried installing both drivers without a restart between both installations, but that didn't help.
    I am wondering if anyone in the community has seen something similar. Any advice, information or assistance will be highly appreciated. Thank you very much in advance for your time.
    Best regards,
    Moe.
    Solved!
    Go to Solution.

    Welcome to the Lenovo Community !
    Check out the link I have posted below for video driver installation problems on your model.  The suggestions offered have worked for others.
    http://forums.lenovo.com/t5/Lenovo-C-E-K-M-N-and-V-Series/V570-video-drivers-don-t-work-with-Windows...
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • Intel HD Graphics driver on Yoga 2 Pro fails after Windows 10 upgrade

    Yoga 2 Pro. Everything working fine under Windows 8.1. Upgraded to Windows 10 RTM version. Intel HD Graphics device failed, message in Device Manager is "Windows has stopped this device because it has reported problems. (Code 43)". Installed the latest Windows 10 driver for Yoga 2 Pro from the Lenovo support site (driver dated 7/15/2015). This did not fix the problem. Interestingly, the first time I installed the driver from the support site (I tried it twice), I received a message stating "I already have a newer version of the driver installed". I chose to overwrite/install anyhow, as this was the supported driver from Lenovo. In addition, the Intel Graphics Control Panel (that installed with the driver) fails to come up as well. Is this a known problem? Is there anything else to try? How do I determine exactly which version of Intel HD Graphics I have (there seems to be many versions listed on Intel web site).

    cdsmith22 wrote:
    Update:  I've not had stability when using the Windows 8.1 driver on my Yoga 2 Pro running Windows 10.  The Intel HD Graphics Family driver shows "Working Properly" after first reverting back to the Windows 8.1 driver and the Micro-HDMI port works initially.  At some point though, I end up with the device showing disabled and I'm also having Audio issues.   I decided to upgrade the BIOS which went OK (upgraded from Kona BIOS Version 76CN31WW to Version 76CN43WW).  Then I re-installed the Windows 10 Intel HD Graphics Family driver from the Lenovo website (Version 10.18.15.2040 showing a data of 7/15/15 on the website but 6/16//15 once installed).  However, the driver shows disabled as not working properly so I'm not happy. I'll continue to consider purchasing a support option but figure it'll only reap an apology and perhaps some information confirming the problem but I expect paying for support won't result in a working Windows 10 driver any sooner.  I'm not aware how to report a problem like this to Lenovo without paying them to hear about the trouble they're causing me.Let me stop you from wasting your money.  I too had the problem you described.  What I made sure of was that once I installed that 8.1 driver, and in my case, the one dated March 2014, I went into Windows Update and disabled automatic updates.  That is where it kept getting updated for me.  That was a week ago and still have stability using the old driver. Hope this helps.  Intel needs to make a stable Windows 01 driver like yesterday. 

  • G710 Windows 10 x64 Intel HD Graphics 4600 CODE 43

    Hello,I have on my Lenovo G710 today upgraded to Windows 10 but unfortunately now have problems with my video card.It is the Intel HD Graphics 4600 Series.It works perfectly in Windows 8.1 Update 1.The official updated driver lenovo itself * Windows 10 is not working.  update: Intel has released a beta driver, but I can only get in through Windows Update and have nothing in Windows Update unfortunately.  How can i fix the videocard to working ?

    UPDATE 19:40 / 07:40 PM SOLVEDI fixed the issue with the following steps: 1.Turned laptop off.2.Remove charger and battery.3.Press power button a few times.4.Reinserted battery and charger plugged in.5.Press power button en load windows.6.Removed the drivers of ALL MY GRAPHIC DEVICES (INTEL HD 4600 AND GEFORCE 820M)7. My laptop went black for 5 minutes and never woke up.(Force shutdown by holding power button8. Turned me laptop on (again) and then it was WORKING !!   

  • Lenovo g570 - problems after updating intel hd graphics

    Hello!
    I think i came across a small bug. Don't know for sure which software is to blame, but i think it's the Lenovo Energy Management's  fault. 
    I bought a lenovo g570, with intel integrated graphics driver. Installed w7 64 sp1, drivers from DVD. After a while windows update popuped with intel hd graphics new driver. After installing it, the brightness indicator (the thing that pops up when u change the brightness from the keyboard) got stuck at level 2 even if the display brightness was changing.
    After 2 days i changed my mind and installed w7 32 sp1  after finding out it was a bit pointless to have it these days when lots of programs are running on 32bits. The same thing happened on this windows. The brightness indicator got stuck.
    The mind**bleep** thing (or not) is that after reverting to the old graphics driver, everything was working ok and the brightness indicator got unstucked. 

    Same here in Lenovo G 470, I have tried three times installing and rollbacking, but the problem still remains same.
    Actually before updating graphic driver if you keep your brightness indicator at 'x' level, then after updation, it will always stuck at the 'x' level, although the brightness is changing.  
    But I think it is not a serious issue if everything else is working file, So you could keep your driver updated.

  • Intel HD graphics problem: black zones

    Hi, I have an intel hd graphics and I have something that seems a driver's problem: no matter if I'm using GDM, lightdm, gnome or pathreon: I have a very strange behavior, I recorded it with my phone:
    https://www.youtube.com/watch?v=dD_In8MKmK0
    It's very annoying, and with windows it doesn't happends. What should I do? Thanks for your help

    If you don't mind any possible further instability you can't try linux-git or drm-intel-nightly kernel to see whether your problem is already fixed upstream.
    If it is fixed upstream in one of the above kernels then you just need to wait for the patches to land to stable release.
    If it is not fixed upstream then you'll need to do a git bisect and report it on freedesktop bugtracker. There are many tutorials on the web on how to do a git bisect. Google is your friend.
    If you can't be arsed  to do any of the above you can always browse the existing bug reports here. Maybe you find something that sounds similar to your problem.
    Good luck.

  • Intel 3000 Graphics driver from windows update failing to install. Error 800F0244

    Hi all, So an update has come through windows update for my embedded graphics which is an Intel HD 3000. Problem is the update keeps failing. Tried restarting and nothing changed. I ended up jumping on to the Windows Forums and seems like this problem has just started to pop up for quite alot of users and no solution yet. This is what the windows website says for the Error : SPAPI_E_SIGNATURE_OSATTRIBUTE_MISMATCH0x800F0244 The software was tested for compliance with Windows Logo requirements on a different version of Windows, and may not be compatible with this version. So was wondering if anyone else had this problem and if anyone found a solution?  

    Hi Everyone , So after a few minutes of digging around this is what I found. This is the driver version that is failing for intel HD 3000. ( 9.17.10.4229 )     So I thought I'd check the driver on the Intel site, to see if it was the latest, which it was .. (9.17.10.4229)    And this is the driver currently installed for my HD 3000... and as noted its  ( 9.17.10.4229 )   SO its seems this problm is a windows update issue and the most current driver is available through intels website. No need to stress, jump onto the intel downloads page and download the latest one if you havent already, This is a link to the  32Bit Driver https://downloadcenter.intel.com/download/24970/Intel-HD-Graphics-Driver-for-Windows-7-8-8-1-32bit  Heres the link for the 64Bit https://downloadcenter.intel.com/download/24971/In​tel-HD-Graphics-Driver-for-Windows-7-8-64-bit As for the windows update one, hide that update as clearly something isnt right and surely MS will patch it soon enough! Hoped this helped   

  • Problem on Intel Hd Graphic 4000

    Hi, guys! I just formated my notebook (HP Pavilion dv7-7047cl) and instaled the drivers from the HP Support center. Everything looks great, except for the INtel HD Graphic 4000, that shows a yellow exclamation on the drive list. My notebook also have a Nvidia Gforce GT 650M Driver instaled, and seems to work well. Ima kinda desperated here, because Ive donwloaded from the hp support site the last driver, but it keeps showing the yellow exclamation on it. How should I do to instal the Driver correctly : (sorry bout english) 

    You can download and install Intel HD graphics driver from below intel website and check if graphic drivers are installed properly.
    https://downloadcenter.intel.com/download/24973/Intel-HD-Graphics-Driver-for-Windows-7-8-8-1-64-bit

  • Problem with 3 monitors Intel HD Graphics and GeForce GTX 560

    I would like to attach 3 monitors to my box -- 1 to integrated Intel card and 2 to discreet Nvidia. I've tried different configs but I failed to make monitors connected to different cards to work at the same time. I have system with stock kernel, latest updates and the following configuration:
    $ lspci | egrep "VGA|Disp"
    00:02.0 Display controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
    $ pacman -Qi xorg-server xf86-video-intel nvidia awesome-git linux | egrep "Name|Version"
    Name : xorg-server
    Version : 1.17.1-3
    Name : xf86-video-intel
    Version : 2.99.917-3
    Name : nvidia
    Version : 346.47-3
    Name : awesome-git
    Version : 3.5.2.397.gdde5b1b-1
    Name : linux
    Version : 3.18.6-1
    $ lsmod | egrep 'i915|nvidia'
    nvidia 8335766 46
    i915 946695 2
    button 12953 1 i915
    i2c_algo_bit 12744 1 i915
    video 18043 2 i915,asus_wmi
    drm_kms_helper 80985 1 i915
    drm 263481 7 i915,drm_kms_helper,nvidia
    i2c_core 50152 6
    drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia
    intel_gtt 17848 2 i915,intel_agp
    I've tried different xorg configs. Here is the best one. All 3 monitors are active with it (I could drag cursor over them) but only 2 (which connected to nvidia card) display DE.
    Section "DRI"
    Mode 0666
    EndSection
    Section "Monitor"
    Identifier "SAM"
    ModelName "Samsung SMS27A850"
    HorizSync 30.0 - 90.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    DisplaySize 597 336 # In millimeters
    EndSection
    Section "Monitor"
    Identifier "VS"
    ModelName "ViewSonic VG1930wm"
    Option "DPMS"
    Option "RightOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Monitor"
    Identifier "BNQ"
    ModelName "BenQ FP737s"
    Option "DPMS"
    Option "LeftOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 560 Ti"
    BusID "01:00:0"
    Option "Monitor-DVI-I-1" "SAM"
    Option "Monitor-DVI-I-2" "VS"
    EndSection
    Section "Device"
    Identifier "intel"
    Driver "intel"
    Option "AccelMethod" "none"
    VendorName "Intel"
    BoardName "Intel Integrated Graphic Controller"
    BusID "00:02:0"
    Option "Monitor-VGA-0" "BNQ"
    EndSection
    Section "Screen"
    Identifier "SAM-Screen"
    Device "nvidia"
    Monitor "SAM"
    EndSection
    Section "Screen"
    Identifier "VS-Screen"
    Device "nvidia"
    Monitor "VS"
    EndSection
    Section "Screen"
    Identifier "BNQ-Screen"
    Device "intel"
    Monitor "BNQ"
    EndSection
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "SAM-Screen"
    Screen 1 "VS-Screen" RightOf "SAM-Screen"
    Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
    Option "Xinerama" "0"
    EndSection
    Also, xrandr shows last monitor (VGA-0, it plugged into Intel card) as disconnected
    $ xrandr
    Screen 0: minimum 8 x 8, current 3460 x 1440, maximum 16384 x 16384
    DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
    VGA-0 disconnected (normal left inverted right x axis y axis)
    DVI-I-1 connected 2560x1440+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
    2560x1440 59.95*+
    1920x1200 59.88
    1920x1080 60.00 50.00
    1680x1050 59.95
    1600x1200 60.00
    1440x900 59.89
    1280x1024 75.02 60.02
    1280x960 60.00
    1280x800 59.81
    1280x720 60.00 50.00
    1152x864 75.00
    1024x768 75.03 70.07 60.00
    800x600 75.00 72.19 60.32 56.25
    720x576 50.00
    720x480 59.94
    640x480 75.00 72.81 59.94
    HDMI-0 disconnected (normal left inverted right x axis y axis)
    DVI-I-2 connected 900x1440+2560+0 left (normal left inverted right x axis y axis) 410mm x 256mm
    1440x900 59.89*+ 74.98
    1280x1024 75.02 60.02
    1280x960 60.00
    1152x864 75.00
    1024x768 75.03 70.07 60.00
    800x600 75.00 72.19 60.32 56.25
    640x480 75.00 72.81 59.94
    640x400 70.10
    But it's still posible to start application on last monitor with 'env DISPLAY:=0.1 urxvt'
    Here is full Xorg log file and highlights:
    [ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
    [ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
    [ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
    [ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
    [ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
    [ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
    [ 4792.053] (EE) intel(G0): Failed to claim DRM device.
    [ 4792.053] (II) UnloadModule: "intel"
    [ 4789.342]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 4789.342] X Protocol Version 11, Revision 0
    [ 4789.342] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 4789.342] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
    [ 4789.342] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
    [ 4789.342] Build Date: 22 February 2015 12:50:32PM
    [ 4789.342]
    [ 4789.342] Current version of pixman: 0.32.6
    [ 4789.342] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4789.342] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4789.342] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:43:55 2015
    [ 4789.342] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4789.342] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 4789.342] (==) ServerLayout "Layout0"
    [ 4789.342] (**) |-->Screen "SAM-Screen" (0)
    [ 4789.342] (**) | |-->Monitor "SAM"
    [ 4789.343] (**) | |-->Device "nvidia"
    [ 4789.343] (**) |-->Screen "VS-Screen" (1)
    [ 4789.343] (**) | |-->Monitor "VS"
    [ 4789.343] (**) | |-->Device "nvidia"
    [ 4789.343] (**) |-->Screen "BNQ-Screen" (2)
    [ 4789.343] (**) | |-->Monitor "BNQ"
    [ 4789.343] (**) | |-->Device "intel"
    [ 4789.343] (**) Option "Xinerama" "0"
    [ 4789.343] (==) Automatically adding devices
    [ 4789.343] (==) Automatically enabling devices
    [ 4789.343] (==) Automatically adding GPU devices
    [ 4789.343] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 4789.343] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 4789.343] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 4789.343] (II) Loader magic: 0x815d80
    [ 4789.343] (II) Module ABI versions:
    [ 4789.343] X.Org ANSI C Emulation: 0.4
    [ 4789.343] X.Org Video Driver: 19.0
    [ 4789.343] X.Org XInput driver : 21.0
    [ 4789.343] X.Org Server Extension : 9.0
    [ 4789.344] (EE) systemd-logind: failed to get session: PID 10086 does not belong to any known session
    [ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 4789.347] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 4789.347] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 4789.347] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 4789.347] (II) LoadModule: "glx"
    [ 4789.347] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4789.359] (II) Module glx: vendor="NVIDIA Corporation"
    [ 4789.359] compiled for 4.0.2, module version = 1.0.0
    [ 4789.359] Module class: X.Org Server Extension
    [ 4789.359] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
    [ 4789.359] (II) LoadModule: "nvidia"
    [ 4789.359] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 4789.360] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 4789.360] compiled for 4.0.2, module version = 1.0.0
    [ 4789.360] Module class: X.Org Video Driver
    [ 4789.360] (II) LoadModule: "intel"
    [ 4789.360] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 4789.360] (II) Module intel: vendor="X.Org Foundation"
    [ 4789.360] compiled for 1.17.1, module version = 2.99.917
    [ 4789.360] Module class: X.Org Video Driver
    [ 4789.360] ABI class: X.Org Video Driver, version 19.0
    [ 4789.360] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
    [ 4789.360] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 4789.360] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 4789.360] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
    [ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
    [ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
    [ 4789.360] (++) using VT number 7
    [ 4789.471] (II) Loading sub module "fb"
    [ 4789.471] (II) LoadModule: "fb"
    [ 4789.471] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 4789.471] (II) Module fb: vendor="X.Org Foundation"
    [ 4789.471] compiled for 1.17.1, module version = 1.0.0
    [ 4789.471] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4789.472] (II) Loading sub module "wfb"
    [ 4789.472] (II) LoadModule: "wfb"
    [ 4789.472] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 4789.472] (II) Module wfb: vendor="X.Org Foundation"
    [ 4789.472] compiled for 1.17.1, module version = 1.0.0
    [ 4789.472] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4789.472] (II) Loading sub module "ramdac"
    [ 4789.472] (II) LoadModule: "ramdac"
    [ 4789.472] (II) Module "ramdac" already built-in
    [ 4789.473] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
    [ 4789.474] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
    [ 4789.474] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "SAM-Screen" for depth/fbbpp 24/32
    [ 4789.474] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 4789.474] (==) NVIDIA(0): RGB weight 888
    [ 4789.474] (==) NVIDIA(0): Default visual is TrueColor
    [ 4789.474] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 4789.474] (**) NVIDIA(0): Enabling 2D acceleration
    [ 4789.841] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
    [ 4789.842] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
    [ 4789.842] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 4789.842] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
    [ 4789.842] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 4789.875] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
    [ 4789.875] (--) NVIDIA(0): CRT-0
    [ 4789.875] (--) NVIDIA(0): CRT-1
    [ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
    [ 4789.875] (--) NVIDIA(0): DFP-1
    [ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
    [ 4789.875] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 4789.875] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
    [ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
    [ 4789.875] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
    [ 4789.875] (--) NVIDIA(0): DFP-1: Internal TMDS
    [ 4789.875] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
    [ 4789.875] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
    [ 4789.875] (**) NVIDIA(0): Option "Rotate" "left"
    [ 4789.875] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4789.875] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4789.875] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4789.875] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4789.875] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4789.875] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4789.875] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4789.875] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4789.876] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4789.876] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    [ 4789.877] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4789.877] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4789.877] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4789.878] (==) NVIDIA(0):
    [ 4789.878] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 4789.878] (==) NVIDIA(0): will be used as the requested mode.
    [ 4789.878] (==) NVIDIA(0):
    [ 4789.878] (II) NVIDIA(0): Validated MetaModes:
    [ 4789.878] (II) NVIDIA(0):
    [ 4789.878] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
    [ 4789.878] (II) NVIDIA(0): Virtual screen size determined to be 3460 x 1440
    [ 4789.905] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
    [ 4789.905] (--) NVIDIA(0): option
    [ 4789.906] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
    [ 4789.906] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    [ 4789.906] (II) intel(1): Creating default Display subsection in Screen section
    "BNQ-Screen" for depth/fbbpp 24/32
    [ 4789.906] (==) intel(1): Depth 24, (--) framebuffer bpp 32
    [ 4789.906] (==) intel(1): RGB weight 888
    [ 4789.906] (==) intel(1): Default visual is TrueColor
    [ 4789.906] (**) intel(1): Option "AccelMethod" "none"
    [ 4789.906] (II) intel(1): Output VGA1 using monitor section BNQ
    [ 4789.906] (**) intel(1): Option "LeftOf" "SAM"
    [ 4789.906] (**) intel(1): Option "Rotate" "left"
    [ 4789.906] (II) intel(1): Enabled output VGA1
    [ 4789.906] (II) intel(1): Output HDMI1 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output HDMI1
    [ 4789.906] (II) intel(1): Output DP1 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output DP1
    [ 4789.906] (II) intel(1): Output HDMI2 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output HDMI2
    [ 4789.906] (II) intel(1): Output HDMI3 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output HDMI3
    [ 4789.906] (II) intel(1): Output DP2 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output DP2
    [ 4789.906] (II) intel(1): Output DP3 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output DP3
    [ 4789.906] (--) intel(1): Using a maximum size of 256x256 for hardware cursors
    [ 4789.906] (II) intel(1): Output VIRTUAL1 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output VIRTUAL1
    [ 4789.906] (II) intel(1): EDID for output DP1
    [ 4789.906] (II) intel(1): EDID for output DP2
    [ 4789.906] (II) intel(1): EDID for output DP3
    [ 4789.906] (II) intel(1): EDID for output HDMI1
    [ 4789.906] (II) intel(1): EDID for output HDMI2
    [ 4789.907] (II) intel(1): EDID for output HDMI3
    [ 4789.920] (II) intel(1): EDID for output VGA1
    [ 4789.920] (II) intel(1): Manufacturer: BNQ Model: 7659 Serial#: 28
    [ 4789.920] (II) intel(1): Year: 2003 Week: 39
    [ 4789.920] (II) intel(1): EDID Version: 1.3
    [ 4789.920] (II) intel(1): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 4789.920] (II) intel(1): Sync: Separate Composite
    [ 4789.920] (II) intel(1): Max Image Size [cm]: horiz.: 34 vert.: 27
    [ 4789.920] (II) intel(1): Gamma: 2.20
    [ 4789.920] (II) intel(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 4789.920] (II) intel(1): First detailed timing is preferred mode
    [ 4789.920] (II) intel(1): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.611
    [ 4789.920] (II) intel(1): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
    [ 4789.920] (II) intel(1): Supported established timings:
    [ 4789.920] (II) intel(1): 720x400@70Hz
    [ 4789.920] (II) intel(1): 640x480@60Hz
    [ 4789.920] (II) intel(1): 640x480@67Hz
    [ 4789.920] (II) intel(1): 640x480@72Hz
    [ 4789.920] (II) intel(1): 640x480@75Hz
    [ 4789.920] (II) intel(1): 800x600@56Hz
    [ 4789.920] (II) intel(1): 800x600@60Hz
    [ 4789.920] (II) intel(1): 800x600@72Hz
    [ 4789.920] (II) intel(1): 800x600@75Hz
    [ 4789.920] (II) intel(1): 832x624@75Hz
    [ 4789.920] (II) intel(1): 1024x768@60Hz
    [ 4789.920] (II) intel(1): 1024x768@70Hz
    [ 4789.920] (II) intel(1): 1024x768@75Hz
    [ 4789.920] (II) intel(1): 1280x1024@75Hz
    [ 4789.920] (II) intel(1): 1152x864@75Hz
    [ 4789.920] (II) intel(1): Manufacturer's mask: 0
    [ 4789.920] (II) intel(1): Supported standard timings:
    [ 4789.920] (II) intel(1): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 4789.920] (II) intel(1): #1: hsize: 1280 vsize 1024 refresh: 76 vid: 36993
    [ 4789.920] (II) intel(1): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 4789.920] (II) intel(1): #3: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
    [ 4789.920] (II) intel(1): Supported detailed timing:
    [ 4789.920] (II) intel(1): clock: 108.0 MHz Image Size: 338 x 270 mm
    [ 4789.920] (II) intel(1): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 4789.920] (II) intel(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 4789.920] (II) intel(1): Supported detailed timing:
    [ 4789.920] (II) intel(1): clock: 25.2 MHz Image Size: 304 x 228 mm
    [ 4789.920] (II) intel(1): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
    [ 4789.920] (II) intel(1): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
    [ 4789.920] (II) intel(1): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
    [ 4789.920] (II) intel(1): Monitor name: BenQ FP737s
    [ 4789.920] (II) intel(1): EDID (in hex):
    [ 4789.920] (II) intel(1): 00ffffffffffff0009d159761c000000
    [ 4789.920] (II) intel(1): 270d01036c221b78eac6f6a3574a9c23
    [ 4789.920] (II) intel(1): 114f54bfef80714f81908180818c0101
    [ 4789.920] (II) intel(1): 010101010101302a009851002a403070
    [ 4789.920] (II) intel(1): 1300520e1100001ed50980a0205e6310
    [ 4789.920] (II) intel(1): 1060520830e41000001a000000fd0038
    [ 4789.920] (II) intel(1): 4b1f510e000a202020202020000000fc
    [ 4789.920] (II) intel(1): 0042656e51204650373337730a200072
    [ 4789.920] (II) intel(1): Printing probed modes for output VGA1
    [ 4789.920] (II) intel(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 4789.920] (II) intel(1): Modeline "1280x1024"x76.0 141.81 1280 1376 1512 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
    [ 4789.920] (II) intel(1): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 4789.920] (II) intel(1): Modeline "1280x1024"x72.0 132.84 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
    [ 4789.920] (II) intel(1): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 4789.920] (II) intel(1): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 4789.920] (II) intel(1): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 4789.920] (II) intel(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 4789.920] (II) intel(1): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 4789.920] (II) intel(1): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 4789.920] (II) intel(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 4789.920] (II) intel(1): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 4789.920] (II) intel(1): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 4789.920] (II) intel(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 4789.920] (II) intel(1): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 4789.920] (II) intel(1): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 4789.920] (II) intel(1): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 4789.920] (II) intel(1): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 4789.920] (II) intel(1): Modeline "640x350"x70.1 25.17 640 656 752 800 350 387 389 449 +hsync -vsync (31.5 kHz e)
    [ 4789.920] (II) intel(1): EDID for output VIRTUAL1
    [ 4789.920] (II) intel(1): Output DP1 disconnected
    [ 4789.920] (II) intel(1): Output DP2 disconnected
    [ 4789.920] (II) intel(1): Output DP3 disconnected
    [ 4789.920] (II) intel(1): Output HDMI1 disconnected
    [ 4789.920] (II) intel(1): Output HDMI2 disconnected
    [ 4789.920] (II) intel(1): Output HDMI3 disconnected
    [ 4789.920] (II) intel(1): Output VGA1 connected
    [ 4789.920] (II) intel(1): Output VIRTUAL1 disconnected
    [ 4789.920] (II) intel(1): Using user preference for initial modes
    [ 4789.920] (II) intel(1): Output VGA1 using initial mode 1280x1024
    [ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
    [ 4789.920] (II) intel(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 4789.920] (==) intel(1): TearFree disabled
    [ 4789.920] (==) intel(1): DPI set to (96, 96)
    [ 4789.920] (II) Loading sub module "dri2"
    [ 4789.920] (II) LoadModule: "dri2"
    [ 4789.920] (II) Module "dri2" already built-in
    [ 4789.920] (II) Loading sub module "present"
    [ 4789.920] (II) LoadModule: "present"
    [ 4789.920] (II) Module "present" already built-in
    [ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
    [ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
    [ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
    [ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
    [ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
    [ 4792.053] (EE) intel(G0): Failed to claim DRM device.
    [ 4792.053] (II) UnloadModule: "intel"
    [ 4792.053] (--) Depth 24 pixmap format is 32 bpp
    [ 4792.053] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 4792.053] (II) NVIDIA: access.
    [ 4792.057] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 4792.057] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 4792.057] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 4792.057] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 4792.057] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 4792.057] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 4792.057] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 4792.057] (II) NVIDIA(0): Config Options in the README.
    [ 4792.091] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
    [ 4792.264] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 4792.264] (==) NVIDIA(0): Backing store enabled
    [ 4792.264] (==) NVIDIA(0): Silken mouse enabled
    [ 4792.264] (**) NVIDIA(0): DPMS enabled
    [ 4792.264] (II) Loading sub module "dri2"
    [ 4792.264] (II) LoadModule: "dri2"
    [ 4792.264] (II) Module "dri2" already built-in
    [ 4792.264] (II) NVIDIA(0): [DRI2] Setup complete
    [ 4792.264] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 4792.264] (--) RandR disabled
    [ 4792.264] (II) intel(1): SNA initialized with disabled backend
    [ 4792.264] (==) intel(1): Backing store enabled
    [ 4792.264] (==) intel(1): Silken mouse enabled
    [ 4792.264] (II) intel(1): HW Cursor enabled
    [ 4792.264] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 4792.264] (**) intel(1): DPMS enabled
    [ 4792.264] (==) intel(1): display hotplug detection enabled
    [ 4792.264] (II) intel(1): Textured video not supported on this hardware
    [ 4792.264] (WW) intel(1): loading DRI2 whilst the GPU is wedged.
    [ 4792.264] (II) intel(1): [DRI2] Setup complete
    [ 4792.264] (II) intel(1): [DRI2] DRI driver: i965
    [ 4792.264] (II) intel(1): [DRI2] VDPAU driver: i965
    [ 4792.264] (II) intel(1): direct rendering: DRI2 enabled
    [ 4792.265] (II) intel(1): hardware support for Present enabled
    [ 4792.265] (WW) intel(1): Option "Monitor-VGA-0" is not used
    [ 4792.265] (WW) intel(1): Option "LeftOf" is not used
    [ 4792.265] (WW) intel(1): Option "Rotate" is not used
    [ 4792.265] (--) RandR disabled
    [ 4792.268] (II) Initializing extension GLX
    [ 4792.268] (II) Indirect GLX disabled.(II) intel(1): switch to mode [email protected] on VGA1 using pipe 0, position (0, 0), rotation left, reflection none
    [ 4792.332] (II) intel(1): Setting screen physical size to 270 x 338
    [ 4792.386] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 4792.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 4792.386] (**) Power Button: Applying InputClass "libinput keyboard catchall"
    [ 4792.386] (**) Power Button: Applying InputClass "system-keyboard"
    [ 4792.386] (II) LoadModule: "libinput"
    [ 4792.386] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
    [ 4792.387] (II) Module libinput: vendor="X.Org Foundation"
    [ 4792.387] compiled for 1.17.1, module version = 0.7.0
    [ 4792.387] Module class: X.Org XInput Driver
    [ 4792.387] ABI class: X.Org XInput driver, version 21.0
    [ 4792.387] (II) Using input driver 'libinput' for 'Power Button'
    [ 4792.387] (**) Power Button: always reports core events
    [ 4792.387] (**) Option "Device" "/dev/input/event2"
    [ 4792.387] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
    [ 4792.387] (II) input device 'Power Button', /dev/input/event2 is a keyboard
    [ 4792.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 4792.399] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 4792.399] (**) Option "xkb_model" "pc104"
    [ 4792.399] (**) Option "xkb_layout" "us,ru"
    [ 4792.399] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
    [ 4792.432] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
    [ 4792.432] (II) input device 'Power Button', /dev/input/event2 is a keyboard
    [ 4792.432] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 4792.432] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 4792.432] (**) Power Button: Applying InputClass "libinput keyboard catchall"
    [ 4792.432] (**) Power Button: Applying InputClass "system-keyboard"
    [ 4792.432] (II) Using input driver 'libinput' for 'Power Button'
    [ 4792.432] (**) Power Button: always reports core events
    [ 4792.432] (**) Option "Device" "/dev/input/event1"
    [ 4792.433] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
    [ 4792.433] (II) input device 'Power Button', /dev/input/event1 is a keyboard
    [ 4792.489] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
    [ 4792.489] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 4792.489] (**) Option "xkb_model" "pc104"
    [ 4792.489] (**) Option "xkb_layout" "us,ru"
    [ 4792.489] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
    [ 4792.490] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
    [ 4792.490] (II) input device 'Power Button', /dev/input/event1 is a keyboard
    [ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event0)
    [ 4792.490] (II) No input driver specified, ignoring this device.
    [ 4792.490] (II) This device may have been added with another device file.
    [ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
    [ 4792.490] (II) No input driver specified, ignoring this device.
    [ 4792.490] (II) This device may have been added with another device file.
    [ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
    [ 4792.490] (II) No input driver specified, ignoring this device.
    [ 4792.490] (II) This device may have been added with another device file.
    [ 4792.491] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
    [ 4792.491] (II) No input driver specified, ignoring this device.
    [ 4792.491] (II) This device may have been added with another device file.
    [ 4792.491] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event3)
    [ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
    [ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
    [ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
    [ 4792.491] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
    [ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
    [ 4792.491] (**) Option "Device" "/dev/input/event3"
    [ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
    [ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
    [ 4792.554] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:07B2.0004/input/input24/event3"
    [ 4792.554] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 8)
    [ 4792.554] (**) Option "xkb_model" "pc104"
    [ 4792.554] (**) Option "xkb_layout" "us,ru"
    [ 4792.554] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
    [ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
    [ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
    [ 4792.555] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event4)
    [ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev pointer catchall"
    [ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
    [ 4792.555] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
    [ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
    [ 4792.555] (**) Option "Device" "/dev/input/event4"
    [ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
    [ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
    [ 4792.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:07B2.0005/input/input25/event4"
    [ 4792.610] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 9)
    [ 4792.610] (**) Option "AccelerationScheme" "none"
    [ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
    [ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
    [ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
    [ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
    [ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
    [ 4792.610] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse0)
    [ 4792.610] (II) No input driver specified, ignoring this device.
    [ 4792.610] (II) This device may have been added with another device file.
    [ 4792.611] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event5)
    [ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
    [ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "joystick catchall"
    [ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
    [ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
    [ 4792.611] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
    [ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
    [ 4792.611] (**) Option "Device" "/dev/input/event5"
    [ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
    [ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
    [ 4792.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:045E:07B2.0006/input/input26/event5"
    [ 4792.676] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 10)
    [ 4792.676] (**) Option "xkb_model" "pc104"
    [ 4792.676] (**) Option "xkb_layout" "us,ru"
    [ 4792.676] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
    [ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
    [ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
    [ 4792.677] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/js0)
    [ 4792.677] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
    [ 4792.677] (II) No input driver specified, ignoring this device.
    [ 4792.677] (II) This device may have been added with another device file.
    [ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
    [ 4792.677] (II) No input driver specified, ignoring this device.
    [ 4792.677] (II) This device may have been added with another device file.
    [ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
    [ 4792.677] (II) No input driver specified, ignoring this device.
    [ 4792.677] (II) This device may have been added with another device file.
    [ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
    [ 4792.677] (II) No input driver specified, ignoring this device.
    [ 4792.677] (II) This device may have been added with another device file.
    [ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
    [ 4792.678] (II) No input driver specified, ignoring this device.
    [ 4792.678] (II) This device may have been added with another device file.
    [ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
    [ 4792.678] (II) No input driver specified, ignoring this device.
    [ 4792.678] (II) This device may have been added with another device file.
    [ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event12)
    [ 4792.678] (II) No input driver specified, ignoring this device.
    [ 4792.678] (II) This device may have been added with another device file.
    [ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
    [ 4792.678] (II) No input driver specified, ignoring this device.
    [ 4792.678] (II) This device may have been added with another device file.
    [ 4792.678] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
    [ 4792.678] (II) No input driver specified, ignoring this device.
    [ 4792.678] (II) This device may have been added with another device file.
    [ 4792.679] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
    [ 4792.679] (II) No input driver specified, ignoring this device.
    [ 4792.679] (II) This device may have been added with another device file.
    [ 4792.679] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
    [ 4792.679] (II) No input driver specified, ignoring this device.
    [ 4792.679] (II) This device may have been added with another device file.
    [ 4792.679] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event16)
    [ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
    [ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
    [ 4792.679] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
    [ 4792.679] (**) Eee PC WMI hotkeys: always reports core events
    [ 4792.679] (**) Option "Device" "/dev/input/event16"
    [ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
    [ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
    [ 4792.712] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input19/event16"
    [ 4792.712] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
    [ 4792.712] (**) Option "xkb_model" "pc104"
    [ 4792.713] (**) Option "xkb_layout" "us,ru"
    [ 4792.713] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
    [ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
    [ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
    [ 4793.050] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.050] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4793.050] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.081] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.081] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4793.081] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.081] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.081] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.081] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    [ 4793.129] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.129] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4793.129] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.160] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.160] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4793.160] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.160] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.160] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.160] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    [ 4793.229] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.229] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4793.229] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.259] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.259] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4793.259] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.259] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.259] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.259] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    [ 4849.763] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4849.763] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4849.763] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4849.794] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4849.794] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4849.794] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4849.794] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4849.794] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4849.794] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4849.794] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4849.794] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4849.795] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4849.795] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    I also tried other configs, but neither of them made me happy:
    Section "DRI"
    Mode 0666
    EndSection
    Section "Monitor"
    Identifier "SAM"
    ModelName "Samsung SMS27A850"
    HorizSync 30.0 - 90.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    DisplaySize 597 336 # In millimeters
    EndSection
    Section "Monitor"
    Identifier "VS"
    ModelName "ViewSonic VG1930wm"
    Option "DPMS"
    Option "RightOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Monitor"
    Identifier "BNQ"
    ModelName "BenQ FP737s"
    Option "DPMS"
    Option "LeftOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Device"
    Identifier "nvidia-sam"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 560 Ti"
    BusID "01:00:0"
    Option "Monitor-DVI-I-1" "SAM"
    Screen 0
    EndSection
    Section "Device"
    Identifier "nvidia-vs"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 560 Ti"
    BusID "01:00:0"
    Option "Monitor-DVI-I-2" "VS"
    Screen 1
    EndSection
    Section "Device"
    Identifier "intel"
    Driver "modesetting"
    Option "AccelMethod" "none"
    VendorName "Intel"
    BoardName "Intel Integrated Graphic Controller"
    BusID "00:02:0"
    Option "Monitor-VGA-0" "BNQ"
    Screen 2
    EndSection
    Section "Screen"
    Identifier "SAM-Screen"
    Device "nvidia-sam"
    Monitor "SAM"
    #DefaultDepth 24
    # Option "Stereo" "0"
    # Option "SLI" "Off"
    # Option "MultiGPU" "Off"
    # Option "BaseMosaic" "off"
    #Option "AllowEmptyInitialConfiguration"
    # SubSection "Display"
    # Depth 24
    # EndSubSection
    EndSection
    Section "Screen"
    Identifier "VS-Screen"
    Device "nvidia-vs"
    Monitor "VS"
    #DefaultDepth 24
    # Option "Stereo" "0"
    # Option "SLI" "Off"
    # Option "MultiGPU" "Off"
    # Option "BaseMosaic" "off"
    #Option "AllowEmptyInitialConfiguration"
    # SubSection "Display"
    # Depth 24
    # EndSubSection
    EndSection
    Section "Screen"
    Identifier "BNQ-Screen"
    Device "intel"
    Monitor "BNQ"
    EndSection
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "SAM-Screen"
    Screen 1 "VS-Screen" RightOf "SAM-Screen"
    Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
    Option "Xinerama" "0"
    EndSection
    [ 4488.527]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 4488.527] X Protocol Version 11, Revision 0
    [ 4488.527] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 4488.527] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
    [ 4488.527] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
    [ 4488.527] Build Date: 22 February 2015 12:50:32PM
    [ 4488.527]
    [ 4488.527] Current version of pixman: 0.32.6
    [ 4488.527] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4488.527] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4488.527] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:38:54 2015
    [ 4488.527] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4488.527] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 4488.528] (==) ServerLayout "Layout0"
    [ 4488.528] (**) |-->Screen "SAM-Screen" (0)
    [ 4488.528] (**) | |-->Monitor "SAM"
    [ 4488.528] (**) | |-->Device "nvidia-sam"
    [ 4488.528] (**) |-->Screen "VS-Screen" (1)
    [ 4488.528] (**) | |-->Monitor "VS"
    [ 4488.528] (**) | |-->Device "nvidia-vs"
    [ 4488.528] (**) |-->Screen "BNQ-Screen" (2)
    [ 4488.528] (**) | |-->Monitor "BNQ"
    [ 4488.528] (**) | |-->Device "intel"
    [ 4488.528] (**) Option "Xinerama" "0"
    [ 4488.528] (==) Automatically adding devices
    [ 4488.528] (==) Automatically enabling devices
    [ 4488.528] (==) Automatically adding GPU devices
    [ 4488.528] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 4488.528] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 4488.528] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 4488.528] (II) Loader magic: 0x815d80
    [ 4488.528] (II) Module ABI versions:
    [ 4488.528] X.Org ANSI C Emulation: 0.4
    [ 4488.528] X.Org Video Driver: 19.0
    [ 4488.528] X.Org XInput driver : 21.0
    [ 4488.528] X.Org Server Extension : 9.0
    [ 4488.529] (EE) systemd-logind: failed to get session: PID 32224 does not belong to any known session
    [ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 4488.531] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 4488.531] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 4488.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 4488.531] (II) LoadModule: "glx"
    [ 4488.531] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4488.542] (II) Module glx: vendor="NVIDIA Corporation"
    [ 4488.542] compiled for 4.0.2, module version = 1.0.0
    [ 4488.542] Module class: X.Org Server Extension
    [ 4488.542] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
    [ 4488.542] (II) LoadModule: "nvidia"
    [ 4488.542] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 4488.543] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 4488.543] compiled for 4.0.2, module version = 1.0.0
    [ 4488.543] Module class: X.Org Video Driver
    [ 4488.543] (II) LoadModule: "modesetting"
    [ 4488.543] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 4488.543] (II) Module modesetting: vendor="X.Org Foundation"
    [ 4488.543] compiled for 1.17.1, module version = 1.17.1
    [ 4488.543] Module class: X.Org Video Driver
    [ 4488.543] ABI class: X.Org Video Driver, version 19.0
    [ 4488.543] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
    [ 4488.543] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 4488.543] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 4488.543] (++) using VT number 7
    [ 4488.645] (II) Loading sub module "fb"
    [ 4488.645] (II) LoadModule: "fb"
    [ 4488.645] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 4488.645] (II) Module fb: vendor="X.Org Foundation"
    [ 4488.646] compiled for 1.17.1, module version = 1.0.0
    [ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4488.646] (II) Loading sub module "wfb"
    [ 4488.646] (II) LoadModule: "wfb"
    [ 4488.646] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 4488.646] (II) Module wfb: vendor="X.Org Foundation"
    [ 4488.646] compiled for 1.17.1, module version = 1.0.0
    [ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4488.646] (II) Loading sub module "ramdac"
    [ 4488.646] (II) LoadModule: "ramdac"
    [ 4488.646] (II) Module "ramdac" already built-in
    [ 4488.647] (II) modeset(2): using drv /dev/dri/card0
    [ 4488.647] (II) modeset(G0): using drv /dev/dri/card0
    [ 4488.647] (EE) Screen 2 deleted because of no matching config section.
    [ 4488.647] (II) UnloadModule: "modesetting"
    [ 4488.647] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "SAM-Screen" for depth/fbbpp 24/32
    [ 4488.647] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 4488.647] (==) NVIDIA(0): RGB weight 888
    [ 4488.647] (==) NVIDIA(0): Default visual is TrueColor
    [ 4488.647] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 4488.648] (II) NVIDIA(1): Creating default Display subsection in Screen section
    "VS-Screen" for depth/fbbpp 24/32
    [ 4488.648] (**) NVIDIA(0): Enabling 2D acceleration
    [ 4489.049] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
    [ 4489.050] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
    [ 4489.050] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 4489.050] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
    [ 4489.050] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 4489.082] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
    [ 4489.082] (--) NVIDIA(0): CRT-0
    [ 4489.082] (--) NVIDIA(0): CRT-1
    [ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
    [ 4489.082] (--) NVIDIA(0): DFP-1
    [ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
    [ 4489.082] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 4489.082] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
    [ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
    [ 4489.082] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
    [ 4489.082] (--) NVIDIA(0): DFP-1: Internal TMDS
    [ 4489.082] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
    [ 4489.082] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
    [ 4489.083] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4489.083] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4489.083] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4489.083] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4489.083] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4489.083] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    [ 4489.084] (==) NVIDIA(0):
    [ 4489.084] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 4489.084] (==) NVIDIA(0): will be used as the requested mode.
    [ 4489.084] (==) NVIDIA(0):
    [ 4489.084] (II) NVIDIA(0): Validated MetaModes:
    [ 4489.084] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
    [ 4489.084] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
    [ 4489.113] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
    [ 4489.113] (--) NVIDIA(0): option
    [ 4489.114] (==) NVIDIA(1): Depth 24, (==) framebuffer bpp 32
    [ 4489.114] (==) NVIDIA(1): RGB weight 888
    [ 4489.114] (==) NVIDIA(1): Default visual is TrueColor
    [ 4489.114] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
    [ 4489.114] (II) NVIDIA(1): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
    [ 4489.114] (--) NVIDIA(1): Memory: 1048576 kBytes
    [ 4489.114] (--) NVIDIA(1): VideoBIOS: 70.24.21.00.00
    [ 4489.114] (II) NVIDIA(1): Detected PCI Express Link width: 16X
    [ 4489.146] (--) NVIDIA(1): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
    [ 4489.146] (--) NVIDIA(1): CRT-0
    [ 4489.146] (--) NVIDIA(1): CRT-1
    [ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0) (boot, connected)
    [ 4489.146] (--) NVIDIA(1): DFP-1
    [ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2) (connected)
    [ 4489.146] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 4489.146] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
    [ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0): Internal TMDS
    [ 4489.146] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
    [ 4489.146] (--) NVIDIA(1): DFP-1: Internal TMDS
    [ 4489.146] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2): Internal TMDS
    [ 4489.146] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
    [ 4489.146] (**) NVIDIA(1): Option "Rotate" "left"
    [ 4489.146] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4489.146] (**) NVIDIA(1): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4489.146] (**) NVIDIA(1): has been enabled on all display devices.)
    [ 4489.147] (==) NVIDIA(1):
    [ 4489.147] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
    [ 4489.147] (==) NVIDIA(1): will be used as the requested mode.
    [ 4489.147] (==) NVIDIA(1):
    [ 4489.147] (II) NVIDIA(1): Validated MetaModes:
    [ 4489.147] (II) NVIDIA(1): "DFP-2:nvidia-auto-select{Rotation=90}"
    [ 4489.147] (II) NVIDIA(1): Virtual screen size determined to be 900 x 1440
    [ 4489.150] (--) NVIDIA(1): DPI set to (55, 140); computed from "UseEdidDpi" X config
    [ 4489.150] (--) NVIDIA(1): option
    [ 4489.150] (EE)
    [ 4489.150] (EE) Backtrace:
    [ 4489.151] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
    [ 4489.151] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7f64dd88653f]
    [ 4489.151] (EE) 2: /usr/lib/xorg-server/Xorg (xf86nameCompare+0x19) [0x4a9159]
    [ 4489.151] (EE) 3: /usr/lib/xorg-server/Xorg (xf86findOption+0x2c) [0x4a2c6c]
    [ 4489.151] (EE) 4: /usr/lib/xorg-server/Xorg (xf86SetDepthBpp+0x430) [0x4828d0]
    [ 4489.151] (EE) 5: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x25e1) [0x7f64d695aab1]
    [ 4489.151] (EE) 6: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
    [ 4489.151] (EE) 7: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
    [ 4489.152] (EE) 8: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f64dd873800]
    [ 4489.152] (EE) 9: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
    [ 4489.152] (EE) 10: ? (?+0x29) [0x29]
    [ 4489.152] (EE)
    [ 4489.152] (EE) Segmentation fault at address 0x231
    [ 4489.152] (EE)
    Fatal server error:
    [ 4489.152] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 4489.152] (EE)
    [ 4489.152] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 4489.152] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 4489.152] (EE)
    [ 4489.295] (EE) Server terminated with error (1). Closing log file.
    Section "DRI"
    Mode 0666
    EndSection
    Section "Monitor"
    Identifier "SAM"
    ModelName "Samsung SMS27A850"
    HorizSync 30.0 - 90.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    DisplaySize 597 336 # In millimeters
    EndSection
    Section "Monitor"
    Identifier "VS"
    ModelName "ViewSonic VG1930wm"
    Option "DPMS"
    Option "RightOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Monitor"
    Identifier "BNQ"
    ModelName "BenQ FP737s"
    Option "DPMS"
    Option "LeftOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Device"
    Identifier "nvidia-sam"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 560 Ti"
    BusID "01:00:0"
    Option "Monitor-DVI-I-1" "SAM"
    Screen 0
    EndSection
    Section "Device"
    Identifier "nvidia-vs"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 560 Ti"
    BusID "01:00:0"
    Option "Monitor-DVI-I-2" "VS"
    Screen 1
    EndSection
    Section "Device"
    Identifier "intel"
    Driver "intel"
    Option "AccelMethod" "none"
    VendorName "Intel"
    BoardName "Intel Integrated Graphic Controller"
    BusID "00:02:0"
    Option "Monitor-VGA-0" "BNQ"
    Screen 2
    EndSection
    Section "Screen"
    Identifier "SAM-Screen"
    Device "nvidia-sam"
    Monitor "SAM"
    #DefaultDepth 24
    # Option "Stereo" "0"
    # Option "SLI" "Off"
    # Option "MultiGPU" "Off"
    # Option "BaseMosaic" "off"
    #Option "AllowEmptyInitialConfiguration"
    # SubSection "Display"
    # Depth 24
    # EndSubSection
    EndSection
    Section "Screen"
    Identifier "VS-Screen"
    Device "nvidia-vs"
    Monitor "VS"
    #DefaultDepth 24
    # Option "Stereo" "0"
    # Option "SLI" "Off"
    # Option "MultiGPU" "Off"
    # Option "BaseMosaic" "off"
    #Option "AllowEmptyInitialConfiguration"
    # SubSection "Display"
    # Depth 24
    # EndSubSection
    EndSection
    Section "Screen"
    Identifier "BNQ-Screen"
    Device "intel"
    Monitor "BNQ"
    EndSection
    Section

    Hi:
    There is a specific order you need to install the graphics drivers for the notebooks with the nvidia/intel graphics.
    1. Install the Intel chipset installation utility and reboot.  If the one on your notebook's support page doesn't work, use this one.
    https://downloadcenter.intel.com/Detail_Desc.aspx?​DwnldID=20775&lang=eng&ProdId=816
    2. Install the Intel HD graphics driver and reboot.  If the one on your notebook's suport page doesn't work, try this one.
    https://downloadcenter.intel.com/Detail_Desc.aspx?​DwnldID=24348
    3. Install the nVidia HD graphics driver and reboot.  If the one on your notebook's support page doesn't work, try this one.
    http://www.nvidia.com/download/driverResults.aspx/​81879/en-us

Maybe you are looking for

  • Can't create event from iPad mail

    I Am using an iPad 2, with all updates.  When I try to create an event from an email, the right screen pops up, but the right hand side is cut off, so I have no save button.  Also can't change calendars, etc, because there is no save button on those

  • Set up iPad to use charter email

    I need step by step directions to access my charter.net email on my new I pad I have an Apple desktop and had no trouble getting it to work

  • Calling .ejb from .ejb

    I am using Weblogic Workshop WLS8.1. I have one .ejb calling another .ejb. Appearenlty, MyBeanHome.java MyBean.java resolve in the workshop. But they are not resolving when I use ant build. Any suggestions. Thanks

  • Applications are logging me out when Javascript files are called

    Hey Guys, I am using APEX 3.1.2 and am using LDAP as my Authentication scheme for my application. SSL is also activated on the environment my applications run on. I can log in using the login page (page 101) and I can use my application perfectly. Ho

  • JFM recording and streaming at the same time

    Hello Everyone, I was hoping someone could help me with using a webcam device for sending and recording at the same time. At this moment I'm only able to record. I tried to make another processor, and put the input of the streaming processor to the o