Intel i7 5th gen with z97 gaming 9 ack 1150 socket

hi guy
im wonder to know if i had intel i7-5th generation can i apply on my 1150 socket mobo?, because i had msi z97 gaming 9 ack. as i seen that in the description show it support
MSI Z97 Gaming 9 ACK
Supports 4th and 5th Gen Intel® Core™ / Pentium® / Celeron® processors for LGA 1150 socket
pls correct me im wrong

i7 supported:
Bios 1.0 (all boards have it at least)
i7-4771
i7-4770T
i7-4770S
i7-4770K
i7-4770
i7-4765T
i7-4790T
i7-4790S
i7-4790
i7-4785T
Bios 1.1 (board made after 2014-06-04)
i7-4790K
that is the list of the i7's the board supports for you to look at! the only one that you would need to be weary of is the i7-4790K as the board may need a BIOS update (the reseller may have newer stock or they may be able to flash the board to support that one if needed so ask them if they know if that one is supported)
as you seem to have one already look what BIOS version it has or if its not built into a system whats the serial number (S/N:000-0000-00000000000000 Leave off the last 3 digits) and i will be able to say what BIOS version it has!

Similar Messages

MOVED: intel i7 5th gen with z97 gaming 9 ack 1150 socket

This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=255550.0

i7 supported:
Bios 1.0 (all boards have it at least)
i7-4771
i7-4770T
i7-4770S
i7-4770K
i7-4770
i7-4765T
i7-4790T
i7-4790S
i7-4790
i7-4785T
Bios 1.1 (board made after 2014-06-04)
i7-4790K
that is the list of the i7's the board supports for you to look at! the only one that you would need to be weary of is the i7-4790K as the board may need a BIOS update (the reseller may have newer stock or they may be able to flash the board to support that one if needed so ask them if they know if that one is supported)
as you seem to have one already look what BIOS version it has or if its not built into a system whats the serial number (S/N:000-0000-00000000000000 Leave off the last 3 digits) and i will be able to say what BIOS version it has!

Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

B-rock, thanks for posting the above. I actually have the same issue, running Windows XP and I don't have that backup location, \Application Data\Apple Computer\MobileSync\Backup\. When I go to Documents and Settings\(username)\ there's a AppData folder followed by:\LocalLow\DataMngr\ .
I have the latest update, 5.0.1 and I have the iPod Touch 3rd gen.
I have tried removing itunes and all that is associated with it then reinstalling and keep getting the same message. I've reset my ipod thinking that would help but still, no backup.
In iTunes, Edit, Preference, Device there are no backups.
What am I doing wrong, can you help?
Thank you!

IPod touch 5th gen with OS X 10.5.8

I've recently bought an iPod touch 5th gen but am struggling to get it to sync with my macbook pro, OS X 10.5.8.
I've done some digging around and it seems I will need to upgrade to 10.6.8 in order to sync it. However, I need to upgrade to Snow Leopard first, and then to Mountain Lion.
It just seems a bit convoluted and I wanted to check I've got this right, before purchasing 2 operating systems just to be able to sync my iPod!!

All you need is Snow Leopard, which is 10.6.8. That and later OSXs require A Mac with an Intel processor. A Mac with a Power PC processor (G4 and G5) can only go to 10.5.8.

BOSD with z97 gaming 5

I buy a new PC and after installing windows i get random BSOF. I try change all my hardware like disk hdd , Ram( Gskill 2x2 1333), vga msi r9 280, vga on board, PSU, i try deactivate lan killer, reset the bios, installe win7 and it do the same.
My current PC specs:
Board: MSI Z97 gaming 5
Bios: Version 1.8
VGA: Sapphira R9 285 oc
PSU: Lepa B700M maxbron
CPU: Intel Core i5-4690k
MEM: Kingston Hyperx Fury 8gb 1x8
FDD: Sand Disk ultra 2 240gb
OS: Windows 8.1 64bit Professional
My problem is the same problem of daniel.burgess.338863. ======> https://forum-en.msi.com/index.php?topic=181419.0
Please help.....
TKS

Quote
The STOP 0xC000021A error occurs when either Winlogon.exe or Csrss.exe fails. When the Windows NT kernel detects that either of these processes has stopped, it stops the system and raises the STOP 0xC000021A error. This error may have several causes. Among them are the following:
Mismatched system files have been installed.
A Service Pack installation has failed.
A backup program that is used to restore a hard disk did not correctly restore files that may have been in use.
An incompatible third-party program has been installed.
Quote
the lats BSOD is memory_ management the other is:
system service exception(dxmms1.sys)
kmode exception not handle (win32.sys)
system service exception(fltmgr.sys)
system service exception(luafv.sys)
0xc000021a
irql not less or equal
unexpected kernel mode trap (ntfs.sys)
attempted execute of non execute memory
system service exception (netio.sys)
do a new fresh OS installation and do not install any 3rd party programs
this refer to norton AV application
do a new fresh OS install
and see how its goes
if you have any issues start with >>Memtest86<<

No signal with Z97 Gaming 5 + HD7850

Hi,
First post here so if there's something to add to it, tell me
So I bought an upgrade kit which had an i5 4670k with a Z97 Gaming 5 and 8gb RAM. It looks like this now :
Board: MSI Z97 Gaming 5
Bios: Version 1.2
VGA: Sapphire HD7850 2Go
PSU: Corsair TX650w (52A - 624W)
Intel Core i5-4670k
MEM: Corsair Vengeance DDR3-1600 2x4Gb
HDD: Samsung 840 120Go + Seagate Barracuda 4To + SanDisk SSD 120Go
COOLER: all stock
OS: Windows 7 64bit Professional
My problem is, since I have this new kit, my PC doesn't want to work anymore with my HD7850. I made a fresh install of Windows incase of incompatibility with my old AMD CPU but now, when I try to boot the computer, nothing shows on screen. To make it work, I have to unplug it and boot with the Intel Graphics 4600 inside my CPU, which is not optimal for gaming
I checked with an old HD4850 and it seemed to boot up correctly, but not with the HD7850.
Something I don't understand is it worked one time. I could play 4h straight with the new Wolfenstein, then the next day the same thing happened.
My motherboard shows no error code on the LED chip, as it boots up as usual except there's no video signal.
I'm asking here some help since I have no clue of what is happening
Thanks

So I tried to CMOS, I guess it changed something because it booted and I could use Windows until I launched World of Warcraft.
BlueScreen with "Attempt to reset the display driver and recover from timeout failed", so I guess there's a problem somewhere :p
I checked my graphic card downloads options, and there's only downloads like "Catalyst" and HydroVision thing. So I guess there's no options for a vbios update. I'll send them a mail but a 2-year old graphic card and from what I saw on Internet and forums, they really don't care about it :/

Weird USB & overclocking issues with Z97 Gaming 7 board

I just had to replace my trusty Z77-G45 board with a new Z97 Gaming 7. The board itself looks fine so far but some things just don't work as I'd expect them to.
1. USB -> as soon as I connect a USB stick, Windows will drop me a blue screen. This only happens with sticks! Memory cards, external hard drives and so on are fine. It doesn't matter whether I use the front or back ports, problem remains the same.
I even tried to re-set the bios USB settings (they were enabled by default), but even disabling them doesn't do any good.
Yes, current Intel and ASMedia drivers have been installed prior to this.
2. Overclocking. I can't change several values in the bios. Values in brackets can be changed, as usual, but many others remain to be "fixed". Starting with the "optimized defaults", could there be anything that blocks these settings?
Bios is current, version 1.8, and CMOS was cleared completely (jumper set, battery & cord removed) after flashing.

Yes, well partly at least:
- found my USB ports to work after I enabled all the options there were in bios (that's a start!)
- found USB sticks to work normally after uninstalling the USB port drivers (ASMedia)
So far, so good at least.
Then I remembered my short "voyage" with a Z87 board. Simply entering numbers seems to work. I like the idea as it keeps total newbies away, but I hate it for not seeing any kind of range.
Especially now, as the platform is totally new to me, and even the default values show up in bright red when I enter them manually. No sort of documentation to be found in the manual, so I hope I'll stumble across something like a "MSI-specific" OC tutorial (most of them seem to concentrate on Asus and Asrock, as usual).
Thanks for trying to help though I couldn't find a button to delete the topic so I thought locking it would be a good alternative.
PS: I'm on Win 8.1 now, which updated my previous Win 8 installation, and it's running fine now. Using things like "show hidden devices" & uninstalling old drivers has helped me to keep my installations for quite some time normally. Often across various platforms even (used to be far more years ago as I don't upgrade as much anymore).

IPod 5th gen with limited storage space due to unknown space used? I don't have anything else loaded, how do I find out what this is?

I have a 5th gen 32gb iPod that I use only for music. Usually I update it via wi fi but it recently updated to the new IOS 8. Now it is saying there is limited space capacity for the music because there is 18.85 gb of used space. I don't have any apps or features on the iPod and all the options such as Siri or App store are turned off. I simply carry it in my car for travel music and use my iPhone for all other business that would need apps/etc.
I reset back to the factory settings and did not link back to the iCloud so it did not "reset" the old copy if it was corrupt. My iPhone has a ton of music plus apps, contacts, etc and does not show this same type of memory usage. Any idea what could be using so much and how to get rid of it??

OTHER
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

Extend my wired Airport Extreme (5th Gen) with a 2nd Wired Airport Extreme (also 5th Gen)

I have a 5th Generation Airport Extreme in my house hard wired directly from my fiber optic provider
Then I have that 5th Generation Airport Extreme hard wired directly to my Desktop Computer in a separate building in my back yard (using an Ethernet Cable run through an underground conduit).
Using that setup, I DO get Wi-Fi for my iPhone 4S & iPad 3 in that separate building in my back yard, but it is sometimes so weak, it really is not useable.
To improve the Wi-Fi signal for my iPhone 4S & iPad 3, I plan on adding a 2nd 5th Generation Airport Extreme in the separate building in my back yard.
I will disconnect the Ethernet Cable that is currently plugged directly into my Desktop computer & plug it into the 2nd Airport Extreme.
Then, I will use a short Ethernet Cable to directly connect my Desktop Computer to the 2nd Airport Extreme.
The desktop computer is an older Dell Dimension 9200 running Windows XP Professional with Service Pack 3
With this set-up, will the strong Wi-Fi signal I now get in my house from the 1st Airport Extreme NOT be reduced?
And since the separate building is only 300 square feet, I assume the Wi-Fi signal there will also be as strong with the 2nd Airport Extreme being so close to everything?
Could someone point me to SPECIFIC instructions on how to CORRECTLY set this up so that the 2nd Airport Extreme will EXTEND my home network?

So, I should unplug the 1st Airport Extreme from the outlet before doing anything?
Yes.
Since the 2 Airport Extremes will be in 2 separate locations, which do I plug into the outlet first?
I would suggest plugging the one in the house first, then the second one in the backyard building. Be sure to connect the Ethernet coming from the first into the second before power-on either base station.
Could I connect the Ethernet both to the 2nd Airport Extreme & then to the desktop, then plug in the current Airport Extreme in the house, then run out & plug in the 2nd Airport Extreme in the separate building?
The key is to leave everything powered-off; connect the Ethernet cables, and then, start by powering up the house unit, then the backyard unit, and then, the PC. Make sense?
P.S. I have the Version 5.5.3 of Airport Utility for Windows (using Windows XP Professional with Service Pack 3)
There does NOT seem to be a later version than that.
That worked great for the installation of the 1st Airport Extreme several months ago, so I shouldn't have any problems, should I?
There is a later version (5.6.1) for Windows, but required Windows 7 to run on. Since you can already administer the 1st 5th gen Extreme with the version you have now, you shouldn't have any issues continuing to use it for the second unit.

Shuffle issue using 5th Gen with Ford's SYNC

I'm using a 5th gen iPod in my 2009 Ford Focus with the SYNC system. Almost everything works just as it should, except SYNC's "shuffle on" command. When used with artists, genres, or playlists, SYNC only seems to build a very short shuffle list of some 12-15 songs, which it repeats until I repeat the selection of artist, genre, or playlist. Then a new short shuffle list gets built and played, over and over, etc., etc. SYNC seems unable to shuffle all songs by my prolific artists, in my well-stocked genres, and in my lengthy playlists in one go, unlike my iPod's built-in shuffle setting.
Ford recommended trying SYNC shuffle with the iPod's shuffle setting turned off, then with it turned on. Doesn't seem to make a difference. They're out of ideas for now. Anyone out there have this problem? Have you found a solution? If so, would you share your experience, please? Thanks!

Absolutely have had this issue.
Here's a fix (but I hate it we have to do it this way):
You have to make sure your iPod's volume is turned all the way up. The static will clear. I haven't found a way around this. The Ford system ***** for that reason. Shouldn't have to rely on our iPods running at full volume in order to work. Seems to kill the battery quicker. But hey, at least you'll have clear sound.
Lemme know if it worked for you.

Newbie Help - 5th gen with no stuff!

Hello all - I recently got a 5th gen iPod from a friend that owed me $$ and all i got was the unit (black/silver - 30GB). Besides a charger, headphones, etc - what do I need to join the revolution? I am totally new to this but feel that this iPod is the bees knees. Any help with software, connections, videos, etc? Any direction would be greatly appreciated. Thanks for helping a newbie out!
New? Windows XP DuLL desktop

Well the main thing you need, besides headphones, is a dock cable to plug the iPod into your computer. You can then put stuff on the iPod with that cable and the cable also charges the iPod from the USB port.
One nice product out there is Griffin's Powerblock which can be seen here...
http://www.griffintechnology.com/products/powerblock/
$30 and can be bought at places like Best Buy. The nice thing about this is that not only is it a charger that plugs into the wall and gives you a standard USB port to charge your iPod and any other USB chargable devices without needing a computer (great for traveling), Griffin was even kind enough to include an iPod USB Dock cable that you need anyway.
In the meantime, if you haven't already, download and install iTunes on your computer and start importing your CD library into it.
Patrick

How can i obtain a user guide for the ipod nano 16GB 5th gen. with out printing it off the computor

How can i obtain a user guide for the ipod nano 16GB 5th gen. without printing it off the computor.

You can't, at least not the one provided by Apple.
B-rock

Can you sync an ipod nano 5th gen with more than one computer

Can you sync an Ipod nano 5th generations with more than one computer. One is a Dell with xp operating system and the other is an Mac laptop.

It is possible to sync your iPod with multiple computers, but syncing with different platforms is not supported by Apple. See this article for more details on how to get this set up.
http://support.apple.com/kb/HT1202
B-rock

IPod classic 5th gen. with sad face goes into disk mode but wont register in itunes

I have an iPod classic 5th gen. A while ago it stopped working and the sad faced iPod started showing up. i've tried putting it into disk mode but when i do it wont pop up into itunes like it should and as soon as i unplug it the sad face appears again. is there anyway to fix it or is it done?

There is a pretty comprehensive post written by another forum member which is about the sad iPod icon. You may find it useful.
The Sad iPod/folder and ! icon.
Btw, there's no such thing as a "4th generation 20gb classic." Your iPod is a 4th gen and not an iPod classic which is a completely different model.

MOVED: Weird USB & overclocking issues with Z97 Gaming 7 board

This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=252886.0

Yes, well partly at least:
- found my USB ports to work after I enabled all the options there were in bios (that's a start!)
- found USB sticks to work normally after uninstalling the USB port drivers (ASMedia)
So far, so good at least.
Then I remembered my short "voyage" with a Z87 board. Simply entering numbers seems to work. I like the idea as it keeps total newbies away, but I hate it for not seeing any kind of range.
Especially now, as the platform is totally new to me, and even the default values show up in bright red when I enter them manually. No sort of documentation to be found in the manual, so I hope I'll stumble across something like a "MSI-specific" OC tutorial (most of them seem to concentrate on Asus and Asrock, as usual).
Thanks for trying to help though I couldn't find a button to delete the topic so I thought locking it would be a good alternative.
PS: I'm on Win 8.1 now, which updated my previous Win 8 installation, and it's running fine now. Using things like "show hidden devices" & uninstalling old drivers has helped me to keep my installations for quite some time normally. Often across various platforms even (used to be far more years ago as I don't upgrade as much anymore).

Intel i7 5th gen with z97 gaming 9 ack 1150 socket

Similar Messages

Maybe you are looking for