Intel iMac and Adobe CS2

Greetings!
I recently purchased Adobe CS2 as well as Macromedia stuido 8. I was planning to upgrade to a new 20" intel iMac and I am curious about the performance of these products under rosetta. Anyone suggestions or additional info? Thanks
-Sam

I've been using a 20" Intel 2 GHz iMac with 1 GB RAM now for just over a month and use Adobe CS2 on it and I'm incredibly disappointed with the performance of the software under Rosetta. So much so that I regret buying the Intel version and wish I'd bought a good old G5 processor model.
The main issue is speed. I upgraded from a Dual 866 mHz G4 and am encountering slower performance with CS2 on my new iMac than I did on that. Illustrator is especially excruciating to use. Another issue is that I can only run two CS2 apps at the same time never three. If I try, one of them randomly crashes. Reinstalls haven't cured it either.
I've called both Adobe and Apple in order to resolve the problem and neither have a solution. Adobe's view on it is that CS2 and earlier were not written to work on the Intel machine and so they cannot address any support problems with patches or updates. Their only solution is waiting until CS3 is released in Autumn which will be Intel compatible.
Based on this experience my advice would be to wait until CS3 is released before you buy one. Otherwise just grin and bear it if you have to have one now!

Similar Messages

  • Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

    Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

    Hi, Derek -
    ...the screen splits into 4 areas and open windows seperate and shrink.
    Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
    It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

  • I have Adobe 5.0, original disk, 6.0 upgrade, original disk, and Adobe CS2. I'd like to install in my new computer with Win.8.1. Can you help?

    I have Adobe 5.0, original disk, 6.0 upgrade, original disk, and Adobe CS2. I'd like to install in my new computer with Win.8.1. Can you help?

    Forget about all the versions you already have (5.0 through to CS2). They will no longer work and the serial numbers are redundant.
    Download the non-activation version of CS2 form the link provided by kglad and use the new non-activation serial number provided at that link. Your existing serial number(s) will no longer work.
    Note: there is no guarantee that CS2 will run well on Win 8.1. Try it and see.

  • I am on a intel Imac and need to update to 10.5. How can i do this?

    I am on a intel Imac and need to update to 10.5. How can i do this?

    You really should update to Snow Leopard because Leopard is no longer in production. The following tells you about Snow Leopard but also what's need to upgrade past Snow Leopard should you be able and wish to do so.
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer)
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
             3. MacBook Pro (Mid/Late 2007 or newer)
             4. MacBook Air (Late 2008 or newer)
             5. Mac mini (Early 2009 or newer)
             6. Mac Pro (Early 2008 or newer)
             7. Xserve (Early 2009)
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         Am I eligible for the free upgrade?
             See Apple - Free OS X Mountain Lion upgrade Program.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
      1. Open Disk Utility from the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Check the box labeled Erase destination.
      5. Select the destination volume from the left side list and drag it to the
          Destination entry field.
      6. Select the source volume from the left side list and drag it to the
          Source entry field.
      7. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal
    startup drive.
    C. Important: Please read before installing:
      1. If you have a FireWire hard drive connected, disconnect it before installing the update
          unless you will boot from this drive and install the update on it. Reconnect it and turn
          it back on after installation is complete and you've restarted.
      2. You may experience unexpected results if you have installed third-party system
           software modifications, or if you have modified the operating system through
           other means. (This does not apply to normal application software installation.)
      3. The installation process should not be interrupted. If a power outage or other
          interruption occurs during  installation, use the standalone installer (see below)
          from Apple Downloads to update.  While the installation  is in progress do not use
          the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
          1. Insert OS X Installer Disc into the optical drive.
          2. Restart the computer.
          3. Immediately after the chime press and hold down the "C" key.
          4. Release the key when the spinning gear below the dark gray Apple
              logo appears.
          5. Wait for installer to finish loading.
          6. Follow instructions.
    E. If updating:
      1. Download and install update(s) 
      2. Use Software Update, or
      3. Download standalone updater(s).

  • I have just got a intel imac and need a router to get on the net......

    Obviously I want cheap! and its important that it will work too!
    So please let me know if you have any suggestions that fit the critera...cheap AND will work with intel imac and TISCALI ( the intel imac wont work with the speedtouch 330 usb they provided)....
    Please Help!!

    Hi Harristotle,
    Welcome to the forum.
    The following link has some reviews which will help you decide:
    http://adslguide.org.uk/reviews/
    You're looking at around 30 - 40 quid. If you shop around you may even find some cheaper. Obviously it would depend on what features you want (wireless etc) and there are more expensive models.
    RD

  • Mac Pro and Adobe CS2

    Since I have been using Adobe CS2 on my Mac Pro, I have been having alot of crashes especially Indesign. Anyone else had problems and know of a way to fix it? I have updated all my software.

    Grant,
    I've installed Windows XP Pro to run Photoshop CS2, Vue5 Infinite, and a number of other programs which have yet to be rewritten for Intel Macs as well as numerous Windows only apps. While it is true that Photoshop runs at a native speed on Windows, it runs just fine under Rosetta for me. I suspect it depends on the file sizes one works with and what your expectations are. Coming from an older G4, Photoshop with Rosetta is much faster than my old computer. Typically I work on 100 - 300mb images.
    The original inquiry was about crashing issues and Version Cue is a real culprit and known issue as is running Photoshop and Illustrator concurrently. As I'll run just one at a time because of that issue and all my Adobe licenses are for specific apps rather than the suites so Version Cue was never an issue, I've not had a Adobe crash yet.
    MacPro, G4 1.5GHZ, Rev.A iMac, Mac IIsi, Mac Plus   Mac OS X (10.4.7)  

  • Problems with new iMac and Adobe Creative Suite 2

    Just wondering if anyone can help me out. I am a Graphic Design student and just bought Adobe Creative Suite2. I installed it on my new iMac, and it wouldn't open InDesign or Photoshop although I had no problems with Acrobat and Illustrator. A pop-up window stated that the program "unexpectedly quit". I have uninstalled and reinstalled three times and was on hold with Adobe Tech Support for three hours until I finally gave up. If anyone knows what's going on I would appreciate it!

    I dragged the installer from the install disk to my desktop and was more successful in installing problem CS2 apps. Make sure to update everything as well. Some times it takes a restart to get the finickiness out of PS.

  • An Intel iMac AND a MacBook Pro for Logic Pro?

    I am torturing myself over this issue lately so any input you guys could offer would be welcome!
    This is the situation:
    After 3 months of serious debating whether to purchase a 20" Intel iMac or a MacBook Pro for Logic Pro, I went ahead about 3 weeks ago and got the iMac. My reasoning behind this was that even though I found the portability of the MBP very desirable, the iMac simply represented a better value with the big screen and bigger hard drive. Since getting it, I must say I love this machine and I have not had one single problem with it. Logic 7.2 runs like a dream on it. By the way, aside from maintaing my iTunes Library, occasional iLife stuff and web surfing with Safari, this iMac is for music production only.
    But here's the problem:
    Still, I can't seem to shake the desire for OCCASSIONAL portability. Keep in mind, I am only a "serious" music hobbyist; I create instrumental hip-hop, trip-hop, electronica style of music mainly with software instruments, loops and breakbeats. So needless to say, I don't tour or do a lot of travelling. But the prospect of being able to compose tracks or make beats in Logic anywhere is DESIRABLE to say the least. I could compose while sitting on the couch watching a game or laying in bed - even though I have no idea of how often I'd actually do that, just having the ability to do it is VERY APPEALING to me. Throw in the fact that the iMac currently shares deskspace with a PC that my wife uses - meaning that I often have to stop what I'm doing to let her use the space. With a laptop, I could move and still continue my flow. Lastly, I unfortunately have bad knees and a bad back so after a couple of hours (or 3 or 4) of sitting at the desk working on Logic, I am seriously hurting. Not comfortable at all. At least owning a MacBook would give me the option to move around to some place more comfortable if I desire.
    So...
    Even though I recently bought a wonderful iMac that works great, I'm seriously considering getting a 1.83 MBP with at least 1GB of RAM and the 100GB/7200 RPM drive to accompany it just for the portability factor. Sure, I could get a used G4 PowerBook or iBook, but all I own is the Universal Binary of Logic Pro; I would have a hard time accepting the decrease in speed I've gotten use to on the Core Duo. Besides, I inherently have a problem buying something (even used) that I know is old and out of date when the latest and greatest is available.
    So here is the $25,000 question: Am I nuts for even considering this? Am I placing too much of a premium on the portability as I would use it?
    This could easily be justified if I was a working musician on the road, but that ain't me. And you can believe that I'm definately not rich and thus don't have money lying around.
    But I have obsessed over this so much lately, I feel that I almost have to get it just to put my mind at ease! I even briefly considered putting the iMac on eBay and just buying a MBP to replace it, but I love the screen real estate I get with the 20" iMac and I question if I'll be truly satisfied with a 15.4" screen FULL TIME. 17" might be better, but I doubt if I can wait until June for them to arrive. In addition, everything would connected via my wireless LAN and .Mac so file sharing should not be an issue.
    Help!!!
    What would you do? Sell the iMac or just get a MBP as cheap as I can?
    Opinions, Please!
    20" iMac Core Duo, 2GHz, 2 GB RAM, 250 GB HD, 128MB VRAM   Mac OS X (10.4.4)  

    I love the portability my powerbook gives me. You can use a PB in your setup. You can run an external monitor for either PB or MBP. You can node. Universal Binary menas it is an application which has the components written for both PPC and Intel chips-so you don't need to do conversion. Nodes won't require you buy a nother license. so the answer is down to how much the 2 upgrades and 1 crossgrades will set you back vs how much use you'll get out of them. IMO the iMac is inexpensive (I mean that in a good way-worth hooding on to). Maybe just look at a refurb PB unless you really have the extra cash.

  • HT6001 updated iTunes on intel iMac and now it won't open at all

    I'm using a 2007 intel imac 20" (2ghz intel core 2 duo) and itunes just updated automatically (to 11.1.4). Now it will not open, I just get an error message "iTunes quit unexpectedly" before it even opens. There seems to be no way to uninstall itunes on OS X 10.9.1. I have restarted to no avail. Any ideas? (no, time machine is not setup)
    Thanks!

    please, any help at all? I'm about to throw this imac out a window and never by another apple product again.

  • Intel iMacs and AirTunes (or possibly iTunes 6.0.3)

    Are there any other Intel iMac users who are having problems playing music to remote speakers using iTunes 6.0.3 on 10.4.5?
    Everything works fine for about 10 minutes then the music suddenly drops out. No error messages, no attempt to reconnect, nothing. My girlfriend can play music from her PowerBook (using iTunes 6.0.2 on 10.4.4) all day long without a hiccup, despite being further from the base station and usually getting a much weaker signal.
    Amusingly I can play my shared iTunes playlists through the PowerBook to the remote speakers without any trouble.
    I thought that my network setup might be at fault so I've tried turning off mixed b/g support, changing to WDS rather than having the AE join my existing network, turning on interface robustness, etc all to no effect.
    Has anyone else got the same problem?

    It looks like this is related to the problems people are having with AirPort networks on the new iMacs.
    See http://discussions.apple.com/thread.jspa?threadID=339752 for more info.

  • TS2570 i have an intel imac and im getting a grey sceen. I get the flashing question mark folder. iv changed the H.D 2x and tired to install a new os into it but no luck. The mac isnt going into safe mode or anything. help?

    Intel imac 2009. Grey screen with question mark folder. Changed harddrives 3 times now. Tired 5 keyboards on all Usb ports and a hub and keyboard wont boot to startup or safemode of anything but hub gets power. disc drive wont eject or accept a disc cuz keyboard commands not being sent to computer. Help?

    Keyboards must be connected directly to the USB port, not through a hub.
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • SilverKeeper backup doesn't work correctly with Intel iMac and 10.4.8

    I use SilverKeeper 1.1.4 to backup daily to a LaCie drive. But it will no longer do automatic backups (that is, wake computer from sleep at 6am before I start the day) since I migrated from PowerBook G4 to new Intel iMac 24". It only starts the backup when I come and wake computer, not by itself, which it had done before...The SilverKeeper people have been unable to help me.
    New Intel iMac 24"   Mac OS X (10.4.8)  

    Could very well be that SilverKeeper's scheduling function no longer works with 10.4.8. Let me suggest alternatives that do:
    1. Deja Vu
    2. Synk (Backup, Standard, or Pro)
    3. Synchronize! Pro X
    All are universal binaries. You can find them at www.versiontracker.com or www.macupdate.com.

  • SilverKeeper stopped working correctly with Intel iMac and 10.4.8

    I use SilverKeeper 1.1.4 to backup daily to a LaCie drive. But it will no longer do automatic backups (that is, wake computer from sleep at 6am before I start the day) since I migrated from PowerBook G4 to new Intel iMac 24". It only starts the backup when I come and wake computer, not by itself, which it had done before...The SilverKeeper people have been unable to help me and I have jumped through all the hoops.. permissions, reload SilverKeeper, trash prefs, etc etc.. nothing works
    Intel iMac 24"   Mac OS X (10.4.8)  

    Could very well be that SilverKeeper's scheduling function no longer works with 10.4.8. Let me suggest alternatives that do:
    1. Deja Vu
    2. Synk (Backup, Standard, or Pro)
    3. Synchronize! Pro X
    All are universal binaries. You can find them at www.versiontracker.com or www.macupdate.com.

  • Sync My Intel Imac and Powerbook

    This may have been asked before...however:
    I have a Imac intel at home and on the road I use the powerbook. Is there any application that will let me keep both the powerbook HD and the IMAC HD in sync COMPLETELY.
    Ie at the end of the day attach the powerbook to the Imac with a firewire cable and the application then looks at changes on both and updates both machines to be in sync....
    However sometimes the files on the Imac will have been updated and then Imac then needs to update the files on the powerbook...
    Might not be such a application in existence.......Hope I explained it alright.
    Cheers
    D.

    Thanks for the info!
    I'll try them out.
    Out of interest would this work: If I do a complete clone of my Intel Imac onto my Powerbook G4 will this work?
    What I mean is there is nothing on the Intel Imac that will not run on the Powerbook application wise because they are universal or powerpc programs?
    Have I got that right?
    Cheers

  • Intel imac and WMP

    Hi
    If I purchase intel imac, I am not going to W. media player. (Unfortunately, I have to use it). Any suggestions other than VLC and Flip4Mac WMV Studio? Thanks...

    Even though 10.4.5 allows installation of Flip4Mac, it won't work yet. Telestream is working on the version that will operate with the Intel Macs. Should be available soon. Check their site occasionally www.flip4Mac.com The player is free, but for a few dollars you can get import/export functions and other tools.
    flip4mac cannot be installed in Intel Macs... gives
    error message... some incompatibility apparently...
    have you been able to install it?...

Maybe you are looking for

  • How can I restore data from my iCloud account on a new iPhone 5c with a previous SW version that my old (stolen) iPhone 5?

    Hello everybody, I need help to restore data from my iCloud account on an unused iPhone 5c because my iPhone 5 with a newer iOS update was stolen. When I try I get a message that I cannot retore my data because the iOS on my iPhone 5c is an older ver

  • Vimeo groups are not updated in ATV3

    Using the ATV for Vimeo but none of the groups I follow are updated since first use. Anyone a suggestion? Thanks in advance!!! Cheers!

  • Make external drive bootable?

    I just got a 1TB Mini Stack External Hard Drive for my Aperture Library and another for my vault. I have not done a back-up of my system yet and would like to know if I should partition both and make each have a bootable section for emergencies. I do

  • Accessing public variables

    I have the code below. What I am trying to do is to print out the value of a public variable. I am trying to change that public variable in the function that handles the result of the remote object call. The problem is the value only seems to change

  • BPM Worklist Task Details Error

    When I open the BPM worklist app via IP address and click on an item for task details, it makes a call to an internal server name that cannot be resolved. Is there somewhere I can change the BPM configuration so that the worklist details opens succes