Intel Mac Mini automatically starts up at 11am!

Before anyone yells out "Energy Saver->Schedule..."
Neither check box is selected!
My mini will chime right on 11:00am every-time ever since my install of Leopard.
Is there perhaps a UNIX command inverse to the "shutdown" that may be at play?
Thanks in advance

Thanks for the informative reply Bob.
Both the SMC and PRAM resets failed to bare fruit.
However I did find a fix via some tinkering;
First off you were right about the reason my machine chose to boot at 11am... I'm in Melbourne, Australia which is +10 GMT and it's also daylight savings time so add another hour, making it +11GMT (tada).
In my original post I mentioned that neither the "Shutdown" or "Startup/Wake" check boxes were selected!
What I did was select "Startup/Wake" and set to 12:00PM, I then set my time manually to 11:59:30AM and shut the computer down. It started at the new presumed time.
I then went back into "Energy Saver" disabled the "Startup/Wake" checkbox and once again set the time to 11:59:00AM... This time the machine didn't startup.
The Final test was then obvious, set the time to 10:59:30AM -> Shut Down and see what happens... Computer didn't startup.
In summary: I think that buy turning on the "Startup/Wake" option and overwriting it with a given parameter, and then disabling it after a test rectified my given issue.
I remember when I used to work on the Power PCs I could just enter into Open Firmware, clear/reset everything and it would all be done. In comparison this was bit of a farce (only because my mini is anchored by dozens of cables and wires)
Thanks Again,
-Z

Similar Messages

New Intel Mac Mini Start-up Problems

I've recently purchased a new Intel Mac Mini (my first Mac after switching from a PC). Several times (probably once a day), the mac mini won't start-up.
I've noticed it happens after I've used iPhoto or iDVD. The mini becomes busy and performance seems to slow. After the software has finished its task, I can exit the application fine and shut down the mini.
When I then go to boot the mini, the little blue light comes up, but nothing else happens. It's almost as though it's in sleep mode (which it isn't). I've tried different ways to wake it using the keyboard, mouse and start button, but nothing.
The Mac Mini will only start-up again if it is unplugged from the mains and left for several minutes.
Has anyone else had this problem? Is there something I'm doing wrong that my lack of Mac knowledge may not be aware of?
Any help would be appreciated.
Thanks

I have been frustrated by the same issue. My (admittedly non-professional) diagnosis is that the problem is related to heat build up. I am able to boot normally only after forcing a hard shut down and waiting for "a while" (5 minutes is not enough, 30 minutes does the trick). Thus my hypothesis that an appropriate cooling down period is needed.
Any similar thoughts? I'm calling Apple today...

Bluetooth Not Available on Intel Mac mini

I keep losing the Bluetooth wireless connection between my Apple wireless mouse and keyboard and my Intel Mac mini (which is running Mac OSX 10.5.5)
Tried re-booting but it doesn't always come back.
Looked in System Preferences, but if the connection is lost, Bluetooth has disappeared as if not installed. If the connection is present then all seems OK. You can check battery levels etc.
Left to itself Bluetooth can re-appear sometime later as mysteriously as it disappeared, maybe after half an hour or so. Very annoying as I have to result to using an Apple USB mouse and keyboard when the connection is lost.
Tried running Bluetooth Updater but it says I haven't got Bluetooth if the connection is lost! But it came pre-installed on purchase. Problem only seems to have started since upgrading to Leopard. Never had this problem with Tiger.
Any thoughts would be most welcome.
regards,
BJ

Ok, I've resolved this on my machine, at least for the time being.
Here is what I did. I am not advising anyone else to do this and I am in-no-way stating this will fix your problem. I'm just relaying what worked for me. If anyone chooses to try this then it's on their own head!
I opened my Mac Mini and located the Bluetooth circuit board just in front of the rear power button. I removed the small phillips screw holding the board in place and noticed that the connector that connects the board to the main motherboard was not seated well. I removed the connector and reattached it, making sure I felt the 'click' as the connector was pushed home.
I had also read on the net that the routing of the bluetooth ariel cable may cause problems due to interference from the USB ports. I took the opportunity to extract the ariel and run it over the disk and away from the USB ports. Before putting the lid back on I booted up to check Bluetooth was working again.
So, I now have my Mac Mini with Bluetooth working again. We shall see how long this lasts - perhaps the root cause was a loose connection, in which case it may be fixed permanently now. I shall report back in a few weeks.
Be aware that opening your Mac is going to invalidate any warranty. Mine was out of warranty anyway so I was not bothered. I've also got a degree in software and electronic engineering so know my way round the insides of computers. Please make your own assessment of your level of expertise before deciding to try what I did. It may not work for you anyway!

Need Advice: New Intel Mac Mini Still In The Box

Hi!
Okay.. I know... I have several posts going here as I have several issues I am trying to solve rather simultaneously. Thanks for being patient with me.
I have my old 1.25 Ghz PowerPC Mac Mini running 10.4.11 and all was well and happy. Then Security Update 2007-009 happened and all went to ....well... you know and, yes, it was bad! Went to Apple, got it running of sorts as they re-installed the OS, but they used an old version of OS X. (10.4.7. Can you believe that?) This caused other problems. It continues to have all sorts of difficulties, as I have had to get applications to re-recognize that the computer is back up to 10.4.11. Currently, I am struggling with trying to get iTunes to access it's music folders on the external hard drives. Realized that I hadn't even gotten around to figuring out whether or not some of my other applications work, like some of the games and third party, etc.
The thing is I got a new Intel Mac Mini for Christmas and it's still in the box because as I suspected I need to get my old mac perfect again before I can even think about migrating stuff over to the new Mac. But.. here's the thing... it's starting to look pretty much like 2008 will come and go before I can get the old Mac ready enough to take the new Mac out of the box. This really is rather silly!
Now... I can't get the old Mac to see the music and it made me think. I have all of my iTunes music and iPhoto backed up on an external hard drive (I used Apple's "Back-up" software to do it) and in addition to this two complete copies of the iTunes music and iPhoto photos albums on two separate external hard drives. Should I just forget using migration assistant? Can I get my music and my photo albums into the new mac directly from the external hard drives?
Or...can I use "back up" to restore the music and photos into the new Mac?
I am starting to think that the best way to get my new Mac running is not risk it by attaching it to my old Mac. What do you think?
Thank you so much for any advice or experiences you can give. -Charlotte

I know that I am vacillating back and forth as to what to do. Thanks so much for being patient with me. All of your advice is really appreciated and I am at least closing in on deciding on my strategy. Probably will follow your first response advice, especially considering that some of the third party apps may not have updates to handle Leopard quite yet. Anyway... it's a good strategy since everything is on the externals anyway.
You can say that fine.
Ha ha ha.... yes, I've been messing around with computers since my parents bought our first Apple computer back in 1979. Just like you, I've never had a serious problem with any of the computers and we've had them all, running all sorts of things from the Original Apple and Apple IIc (which my parents still have and it still runs!) to the Commodore and all the Windows permeations and then on to the Macs running Jaguar, Panther and Tiger, probably because we've always been careful with the machines and what we install in them and how we update them. I have always kept my computers on UPS' and un-plug them when storms brew outside. As it is I am still using my eight year old Windows 98 computer, (for games mostly) and it still runs quicker than most peoples windows pcs and it's only a 740 Megahertz.
I haven't had to re-install anything, especially on this lovely little Mac Mini until now and wouldn't have in this situation, had I known more. I had taken the little Mac Mini in for a Procare "Tune-Up," only four days before the big up-date disaster. Not sure what they did to my mac in the tune-up but the guy gave me back the machine assuring me that the computer was perfect with no problems in answer to my asking "were they sure?" Even after the Genius Bar techs at the Apple Store re-installed the OS to fix the big problems it seems that no one ever thought to run verify disk. Had the Genius Bar techs at the time of the tune-up done this, or at least told me to do this, the last security update would not have wrecked so much havoc. It was only after I got the machine back from Apple that second time that I found that the directory had been corrupted when I ran disk verify. Actually it is amazing that I have had this little Mac Mini for so long and so not have had any problems on it that I would be able to go so long without having to know this really pretty important aspect of keeping one's mac in good running shape. I had been running maintenance scripts and permissions verify and repair and thought that was all there was to it. Silly! You know... that really is a testimony of how nice these little machines are.
Anyway... experience is a good teacher and I have learned so much it's actually been great! This stuff is pretty interesting.
Now... on to Leopard!
Thanks so much and you have a great New Year! -Charlotte

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06 Intel Core Duo
I can't figure out how to get this to work. Is it possible?

WildBull wrote:
Will it work if I connect via usb instead of firewire?
No. There is no "USB Target Disk Mode".
Just so we're clear, when you start your Mac mini in FireWire Target Disk Mode (TDM - holding T on startup), do you see a FireWire icon on the Mac mini's display? IIRC, it's not required that the Mac mini be connected to a display for TDM, but it would help diagnose whether or not the mini is actually starting in this mode.

Need help with Intel Mac mini... potential logic board failure...

Hey everyone! For the past couple years, I've been using an Intel Mac mini which I was able to afford before rough times hit for me. It has been a champ for a long time, until recently. In the past week, the clock would lose time ever so often, and last week, whenever I'd try to power it up in the morning (as I shut it down every night), it wouldn't start up most times (meaning, you hit the power, nothing... no LED, no fan, nothing on screen, nada). After a while, I would somehow manage to get it to start. I assumed at this point, the lithium battery (coin type CR2032, not the traditional 1/2 AA purple battery) was shot. Since I'm in the middle of a job transition, I was waiting until I had time to put in a new battery, which I was planning to do this weekend. Then Wednesday happened...
I go to start it, nothing... A week before this, I started losing time and sometimes it would not boot. I figured eventually I would be able to start it since I was able to sometimes get it to start after a half hour or more. That didn't happen. So I decided to go ahead and swap in the new battery. I do that, power it up, nothing. I reset the SMC (same as PMU on the PPC Macs), to no avail. I reseated the RAM, and did everything I could think of, but it's deader than Elvis. I also had took the power supply to a guy who had a voltimeter. He said voltage was getting to all pins.
I went back and read some of the archives on this board. Someone mentioned something about a repair exception. It mentioned that sometimes if you call AppleCare (even if you don't have it) and ask for a repair exception, sometimes they'll agree to have the logic board replaced due to it being a documented problem. How true is this and who should I contact?
Can anyone suggest anything here? If I can't revive the mini, I may have to drag my iMac back out and try to set it up to run OS X. I can't no where near afford another computer at this point. I'm praying the mini can be fixed. I would appreciate any and all suggestions!
Thanks in advance!
Tommy

It does sound like the logic board has gone bad. However, there are no current repair extension programs open on the Mac Minis.
This page lists the open extensions:
http://www.apple.com/support/exchange_repair/
So that's not an option. I assume that the Mini doesn't have AppleCare (whoops.), so I would not count on Apple covering it, but it's always worth a shot. You can call AppleCare (1-800-275-2273) or visit your local Apple Store

Best app for QT on Intel Mac Mini kiosk?

Hi all:
I've sent variations of this message off to various folks and fora pertaining to Flash, Director, Livestage, etc., so I thought I'd ask here as well.
I'm working on a very high profile exhibit here in NYC, which is opening to the public on Sept. 11th (draw your own conclusions). It involves a number of standard definition (not HD) video-based kiosks.
These are running on bottom of the line off-the-shelf single-core Intel Mac Minis w/ 512MB RAM. No, we cannot change the platform. We have to make it work with what we have.
We built our prototype in Director. Unfortunately, using QT in Director projects on Intel-based Macs is a non-starter, because Director executables are not Universal Binary yet.
The app is very simple -- a black background that just waits to trigger the video on a mouse click and returns to the black background when the movie is done playing.
The key thing is we need to display the highest possible image quality. We had hoped to use H.264. We've also tried 3IVX and Motion JPEG B, all of which play beautifully in the QT Player but stutter noticeably once in Director. This turns out to be a known problem, and a Universal Binary version of Director isn't due until next year.
I've also tried making a QuickTime Media Link (QTL) file that allows us to "quit when done" so that we can use BuddyAPI to open the program with the QT Player and then drop back to the Director app when done.
That works great, except for the fact that as of OSX 10.3, you can't hide the menu of an app when switching to another app, which looks terrible. Arrgh.
Flash's Player v9 (which is Universal Binary) only runs in a Browser, not as a standalone. So unless there's a browser that will run fullscreen with no chrome, that's out for the foreseeable future as well.
So now I'm thinking about building the whole thing as a self-contained QT movie in Livestage.
Livestage only runs in Rosetta, so I don't know if the QT file I build run natively in the QT player, so that I can use h.264 or 3IVX or whatever without it stuttering. I'd be perfectly happy w/ 3IVX, by the way...
Any help or direction appreciated. We have to have this up and running on site by next Monday, the 14th.
best,
FBC

Right -- well, I'm not concerned with editing the video (I use FCP, too).
I completely understand the role of bitrate in making videos look good, and for the record, I've gotten decent looking videos from Motion JPEG B at the Medium (default) quality settings...
But that's not my question here. The problem is playing back any QT codec as an asset in a larger application (eg, Flash, Director, Livestage) running specifically on the Intel Mac Minis. At the root of the problem is lack of universal binary projectors.
At the moment, the best option I have so far is using SAFT to put Safari into Kiosk mode (no title bar, etc.) and using that to play back a Flash SWF file (which give me the needed interactivity) as the default home page.
We're also going to try to roll our own Cocoa app as a wrapper for a 3ivx file. That will almost certainly look better than even a very high bandwidth FLV/SWF.
Any other ideas appreciated...

Someone tell me why is it so difficult to print from my Intel Mac Mini

I'm so frusrated at this Intel Mac Mini of mine. I wish honest to God that I never bought this evil little machine.
I have the following printers:
HP Photosmart 7550
HP Laserjet 1012
Canon MP830
I can't get anything to print! It so **** frustrating. I switched my wife from her WinXP to a Intel Mac Mini (10.4.6). She hates the Mac Mini because she can't print anything.
Why is it so difficult? Please someone enlighten me.
After months (not kidding) of searching on the web I was able to get the Photosmart 7550 to print using one of the gimp drivers, but I couldn't get it to change the paper type or quality. So that tells me I can't print any photos from my Mac. Need to use the WinXP box.
Then I was able to get the 1012 printing by selecting "open using rosetta" for the Printer Setup Utility, and selecting the "HP LaserJet 4 series - Gimp-Print v5.0.0-beta2". So now I could at least print BW docs. Great the Mac Mini is not a total waste. Then I updated software, which include the Mac mini SMC Firmware Update. I don't know what did it, but now I can't print to the 1012 anymore. ARGHH!
I tried deleting the Library/Printer/HP directory, Reseting the Printing System, Restarting the CUPs, Installing PDDs, Installing the gimp drivers. What the ****! Why do I need to do any of this? I thought the Mac was suppose to be so easy. With all those **** commercials talking about how the Mac can do anything a PC can do, you would think one of those things is being able to print.
Those people making those commericals should try using the "Printer Setup Utility" program. That will change their tune. First you have to search for your printer, then pick the Printer Model, and then pick the specific model. And God forbid you click to fast, oops you've now picked a generic printer, needs to start all over again. There's no back button. You've already committed to the generic printer type. Now you have to open the Printer Setup Utility again and delete the generic printer and go search for your printer again. Lame.
Don't get me started with the Canon MP 830. I thought, ok maybe its because the 1012 and 7550 are older printers. I'll go buy a new printer - they must have current drivers for that. Canon tells me that the MP 830 is only a single OS machine, meaning you can only connect it to a windows machine and only other windows machines can print from it, or connect it to a Mac, and only other Macs can use it - Again, Lame.
Really I wanted to love the Mac OS. When I first got it, I was loving it. But what good is it if I can't print. I searched the web and it seems I'm not the only person having issues with printing.
I hate this Intel Mac Mini with every fiber of my being. Ok, maybe my printing woes are only because it's a Intel chip, and the PPC macs are golden. But come on, if you can't print from a computer, what good is it?
Please, someone help me. Otherwise, anybody want to buy a Intel dual core Mac Mini?
mac mini duo core Mac OS X (10.4.6)

You have two different issues: HP and Canon.
I don't know if I believe the Canon people. Windows XP has lots of different print options. Try installing Bonjour on Windows and then setting up a networked, Color Apple Laserwriter PS printer using "http://macmini.local:631" (assuming macmini is the name of your Mac). I have done this before (though not on a Canon). I am sure Canon will only support a standard configuration and this is not quite standard. Give it a try. It doesn't sound like it can hurt anything in your current setup.
For the HP, you might have to just wait for an updated driver from HP. HP has always had this problem. They are a huge printer company and I'm sure they get Apple hardware and OS versions before anybody else in the world. And yet, it seems as if they don't even begin working on their drivers until Apple officially releases a new OS. HP drivers are always the last to show up for a new OS and the first to break. If you get it working under MacOS 10.4.6, and then upgrade to 10.4.7, it is very likely that the HP drivers will stop working.
Unlike some of the other big companies, HP seems to have made the transition from Classic MacOS to MacOS X seamlessly. Their printer driver software works just as well on MacOS X as it did under MacOS.

Blinking Green Light! Mount & Unmount on Intel Mac mini

Hi all.
This is my sister's iPod shuffle, lat night she plugged into her new Intel Mac mini Core Duo, and the shuffle mounts, everything appears to be in working order, she said today she still listened to it.
Just now she accidently plugged the shuffle while in our Dad's account (on the Mac mini as well), then seemed like "all well broke loose", this is what she told me, first iTunes was not responsive, colour wheel, so she restarted but only arrived at the blank desktop and only the shadow of the Top Menu Bar
I reset the iPod shuffle, was successful in plugging it in, quit iTunes (all in her own account now) and update the shuffle software.
When inside iTunes, once I started Autofill, it suddenly unmounted by itself, followed by the red exclamation error message when you accidently remove an external device unproperly.
When I tried plugging in again, it refuses to mount. Just blinking Green, or pull out again, blinking Yellow.
Now I plug it into my own iMac G5, and it mounts and is blinking slowly with yellow light, what seems to be normal charging.
Has this something got to do with the Intel Mac??
Thanks and cheers

This probably has nothing to do with the Mini, but everything to do with the Shuffle. Like all flash memory, it is susceptible to damage if unplugged at the wrong time.
For the shuffle, you cannot remove it while it is updating or in Disk Mode. This warning is presented in the User's Guide and is repeated in several other places throughout the Support pages as well.
The general rule is: If it's blinking amber, don't unplug it before you unmount it. Unmounting can be done either in iTunes or in the Finder.
About all you can do, given the symptoms you're seeing, is try to Restore it. See the instructions in the User's Guide and/or on the iPod Shuffle Support Page.

Intel Mac Mini Duo on WiFi network

Just got my Intel Mac Mini Duo and had upgraded to 10.4.6, firmware, boot camp, Windows XP Pro all running alright.
I had an Airport Extreme and Airport Express based wireless network at home configured with closed network. My PB G4 and another Sony Viao sitting in the same room running nicely over the network to the Internet. Everytime I started the Mini it can locate the closed network and connected but no connection status, and no matter how long I had waited the same thing happened. The only work around is turn off the airport and turn it on again. But still though sometimes it works and sometimes it doesn't. Any one got any clue what's happening or having similar experience?

very long running thread on Mini Core Duo WiFi and Bluetooth problems. see
http://discussions.apple.com/thread.jspa?threadID=387407&tstart=0
person who originally started that thread, which now has 320 posts, just posted that his mini now works after two rather complete repairs.

Intel Mac Mini fans run full blast even when off

Hi All,
I have gone through the forums and haven't found an answer to this one. I have an Intel Mac Mini running the latest updated Tiger that I use solely for a media center.
About a week ago, the box started running fans full blast, regardless of whether it was actually turned on or not. As soon as it is plugged in the fans blast.
Otherwise, it seems healthy, and boots normally.
The steps I have taken so far include resetting permissions, verifying the disk, and resetting the SMC in the proscribed fashion.
After this occurred, I downloaded and installed smcFanControl from Lifehacker.com. This reported fan speed of zero and Temperature of zero.
Next I opened the case and insured the fan/HD cable next to the lttle battery was securely fastened as this had been reported to cause this symptom.
What's next? The device is out of warranty and honestly, I don't want to spend any money if I can help it.
Should I take it apart further and see if the other end of the fan/HD cable has somehow worked loose?
Can anyone think of another cause besides a loose cable?
What if I completely disabled the fan? The hardest thing I ever ask it to do is run iTunes and VLC.
Any advice is greatly appreciated.
Dave

I have refurbished two G5s with LCS and screaming fans (this was avery common problem with G5 LCS macs), the red light on the motherboard could mean the CPUs need to be re-seated. This red LED light appeared on my mac after I had removed the CPUs to add new thermal paste.
If you have done all the necessary basics with no sucess here are a few things to try next.
1 - Coolant
As BDAqua mentioned above, coolant evaporates and often leaks at the 'O' rings, to check this you will need to remove the CPUs from the LCS and check for crystalisation (white rice). If you have leakage, it will be time to drain the block, add new coolant and 'O' rings. This is tricky to do but there is lots of info here and on other sites to help you.
2 - Thermal paste
Replace the thermal paste with Artic MX4.
Try the above and let is know how ou get on.

Can't Migrate from G4 to Intel Mac Mini

Hi
I have been unable to migrate files from my old G4 destop to my new Intel Mac mini. I wonder if anyone could help.
I first tried first using the migration assistant on the Mac mini and used the G4 as a fire wire drive. Failed twice, the process froze both times.
Erased Intel Mac mini and tried to do a restore from G4 using Disk Utilty. Failed twice. Didn't complete process.
I then tried the same twice using Supe Duper. Completed process (took hours) but in both cases couldn't boot Mac mini. Get the folder icon on boot indicating can't find system (I think).
I though I would then clean re-install system files from restore disks that came with MIni mac and start a fresh, but won't allow me to do this !! Spent two days and no further forward.
Any suggestions ?
Would erasing Mac mini and and trying Carbon Copy Cloner work ?
Can I add files manually from G4 to mac mini ?
Thanks in advance.
G4 ibook. G4 desktop, mac mini (intel) Mac OS X (10.4.7)

Exactly which model G4 tower do you have? The
PCI-graphics G4 towers do not support FireWire Target
Disk Mode.
If FWTDM works, have you replaced the hard drive that
came with the G4? Technically, Apple claims FWTDM
will only work with the OEM (original) hard drive
that came with the G4 tower. If you've replaced it or
added a second drive, it might not work correctly in
"target" mode.
If you do have a new hard drive, you should be able
to put it into a FireWire (or USB) external hard
drive case and use the Migration/Setup Assistant to
copy your files over.
If you're still having trouble, you can copy your
files over manually. Do you know which files you're
interested in copying? If your G4 tower works in
"target" mode, but the Migration/Setup Assistant is
having trouble, you can usually just drag all the
files and folders from your user's old home folder to
the new folders on the new computer. (Macintosh
HD/Users/YourUserName/Pictures > NewMacintosh
HD/Users/YourUserName/Pictures)
-Doug
Yes I did change the hard drive to a bigger one so that may be the problem.
When I use the Traget mode I do see my "old" drive (both partitions) on my desktop so it suggests firewire is working.
Won't take everything across including applications, library etc.
Will let you know how I get on.
Thank you for your time. Geatly appreciated.

Normal + 3 chimes at startup with intel mac mini

I posted this in the mac mini forum, but didn't get a helpful response. So maybe someone can help me here.
I have a 300GB USB drive (formatted as Mac OS extended (journaled)) connected to my intel mac mini with the drive's power on all the time. When I start up the mini after the USB drive has spun down I get the regular startup chime plus 3 lower volume startup chimes. The activity light on the USB drive flashes during the 3 chimes. Then the system starts normally with the USB drive icon on the desktop. I can read and write to the USB hard drive with no problems.
If I shutdown the mini and start it up again but now the USB hard drive has not spun down, I get just the normal single chime. Also, if the USB drive is disconnected, I get the normal single chime. I've tried a different USB port, but still got the same behavior.
I've connected a USB flash drive, but it exhibits normal behavior, that is, just the single startup chime.
Are the subsequent 3 chimes at startup OK and just telling me that there is an external hard drive? Or is there a looming problem? Has anyone else experienced this?
Intel Mac Mini Core Duo Mac OS X (10.4.7) Apple BT Mouse & Keyboard

Thanks. But the article says you won't hear the normal startup chime but some number of beeps if there is a problem with 3 beeps meaning no good banks.
I hear the normal startup chime, then 3 of the same chimes but at lower volume. Must be something about the USB hard drive.
When I bought the drive, it was formatted for windows with NTFS. I used disk utility to format is as Mac OS Extended (journaled). I've copied about 100 GB of data to it.

Wireless keyboard delay before active for Intel Mac Mini

I posted this many moons ago when I got my Intel Mac Mini. The issue was never resolved even though several users found it to be a problem. I am reposting the issue to see if there is any progress. I took my Intel Mini in to the Genius Bar at an Apple store. He thought it was a software issue related to the dual processor and thought it would be corrected by an update. This apparently has not happened yet.
When I start up my Mac Mini, the wireless keyboard is not active immediately. When the login screen appears, there is a delay of maybe 20 -30 seconds before a keystroke will show up even though the cursor is blinking on the screen. If I hit a key more than once during the end of this delay period, all the keystrokes eventually show up.
Mac Mini (Intel Core Duo) Mac OS X (10.4.5)

I just bought new Mac mini w/ wireless keyboard and track pad. During initial setup it would not pair to keyboard but it di see trackpad. I could not complete setup, I have no control. Brought home USB keyboard from work and resumed setup. I'm stuck again. In setup it's asking for a trackpad click to continue. The trackpad will scroll, but will not click. The whole system is two days old and nothing works I tried to contact support through the lengthy online screening process and apple ultimately say the new system doesn't qualify for free support.
Totally ******. I'm back to using my old pc.. What to do with this expensive boat anchor from apple?
Really could use some help here
Thanks

Dual PowerMac G4 or Core Duo Intel Mac Mini?

Right now I have a Intel Core Duo Mac mini. I have the following setup and specs on my desk. The mini contains the Duo 1.66GHz processor, 2GB DDR SDRam, 80GB hard drive, OS X & Windows XP, AirPort +Bluetooth, and so on. My problem is that I have always been a tower lover and that is why I purchased the Mac mini because I purchased a 20.1 widescreen HD Dell LCD with DVI-D, VGA, Component, and so on imputs. I wanted this for my Xbox 360 also.
Here is where it starts to get complicated. I also have four, yes four, external hard drives sitting on my desk, and I still need more hard disc space. I have a 250GB, 120GB, 250GB, and 60GB. Plus remember I have a 80GB in the mini. I am also looking into another 250GB or 500GB external hard drive.
Now before I had the mini, I had the original iMac G5 which had a 1.6GHz PowerPC G5 processor in it, 160GB hard drive, and 1.5GB of ram. It was showing age and I needed more speed and a bigger display so I ditched it for the Intel Mac mini.
In addition I am pulling 12 USB ports out the back of my Mac mini. I have a few hubs fulling almost all the ports. I need these for the external hard drives. If I go internal, I can probably live with 6-8 USB 2.0 ports. I will need at least 1 firewire or an iSight camera or my Sony HD handycam, but USB is more needed. In addition I see some PowerMac G4's came with Firewire 800? Is this something I would need, I currently however have no use for it.
But now I really see the need of a PowerMac G4 Quicksilver tower. I was looking into the Dual 1.42GHz PowerPC G4 models, and really don't know which is faster. I would obviously love the expandability of the PCI cards, and independed graphics memory, but am I willing to transition back to PowerPC after moving over the Intel?
I don't know so I am posting it all here in the PowerMac G4 section of the Apple forums. I really hope I can get some good advice here. By the way, I am very Apple and technology frantic, so I know the ins and outs of a tower and stuff like that. So a non Apple warrenty would probably not be a problem.
But one problem is, how much could I get for my Mini which cost me $1099 and how much would a decent G4 tower cost me? I have an extra Nvideo GeForce 4 MX 5400 Ultra with 64MB of ram and DVD-D/ VGA outputs, so that isn't a problem. Plus to replace the AirPort Extreme built into the mini, I have a AirLink 101 Super G (108MBPS) Wireless PCI card. Bluetooth can be added with a simple USB dongle.
UPDATE: Forgot the mention I already have a DVD Burner compatible with OS X and 3.5inch bays. I would like a Dual Layer, but if its a tower, I can upgrade that anytime.
UPDATE x2: I would also like to mention that I use Gigabit Ethernet so any PowerMac model I choose would have to acomidate that such as the Intel Mac mini does.
THANKS EVERYONE!!!!
Mac Mini 1.67GHz Intel Core Duo, 2GB ram, 1.5TB storage, OS X v.10.4.6, 30GB iPo Mac OS X (10.4.6)

I would like one day to have a tower with 4-8 HD drives
(120-250GB each) and HD DVD and Blue-Ray burners.
Good luck Even the Dell towers we have at work have space for 3 HDs, and thats only of you give up one of the CD bays.
Honestly, I unless a blueray player ships in the CPU, I would get a PS3. 1/2 the cost of a standalone blu-ray player, and a game system too
Expected street prices from Sony and Toshiba web sites:
standalone Sony blueray player: 995.
Toshiba HD-DVD: 599
Sony PS3 w/ bluray: 499/599
Is the reason the PowerPC G4 can't handle HD DVD is
processor speed or what? Cause there is always
processor upgrade cards up to 1.8GHz and 2.0GHz Dual.
Thanks.
One of the Apple support pages says you must have a G5...
does not give the background behind it.
On a G4, the OS will not allow HDDVD playback (as HD is defined by FinalCutHD) via the DVD player, BUT it will play back HD video clips (like QT trailers)
On my 867, 720i clips played back w/o a problem, but 1080 would freeze for 20 seconds at a time, (while audio continued normally)
on my Dual 1.42, I have no problems with 1080.
I hesitate to consider or recommend processor upgrade cards b/c for some, the price approaches the cost of a new machine w/o the benefits of faster busses, etc, and, right on the side of the OS X box, it says processor upgrade cards not supported. I would hate to upgrade the OS to find it refused to support my machine.

Intel Mac Mini automatically starts up at 11am!

Similar Messages

Maybe you are looking for