Intel Mac Mini - Does not eject Discs or see the disc that is stuck

It seems like the mac has just stopped seeing the CD drive. I put a disc in there (an installer disc - not a CDR) and the disc didn't mount... I thought it was odd and tried to eject it. no go (not even the sounds like it is attempting to eject). I check system profiler and it lists:
ATA Bus
- MatshitaDVD-R UJ-846
So, the profile reads the drive.
I tried restarting the machine holding the mouse button down and no luck.
Even by pressing the eject button, I do not see the greyed out eject symbol on the desktop that usually appears when you hit eject.
Any ideas anyone?

The open firmware method doesn't work on intel macs unfortunately (at least the command-option-f-o method).
starting with the eject key didn't work either...
in the end, I cracked open the case, popped the top of the drive off, removed the disc by, re-assembled. Note that at this point the computer still thinks there is a disk in the drive. However, upon attempting to read a disk (that isn't there) on boot, the computer realizes this and unlocks the releasing mechanism, so it "ejects" clearing the drive bay.
To be safe, I rebooted a few times... then booted from CD a few times... then booted normally. All seems to be ok.
I do not recommend this method to anyway. This should be done as a last resort by Apple techs. The only reason I did this is because I am pretty far away from any apple service center. For me, I have an external burner attached so had I destroyed the CD drive, I would still have been "ok". Again, this most likely voided my warranty, and I do not suggest this to anyone.

Similar Messages

  • My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

    My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

    Try disconnecting any external devices, especially hard drives
    and try rebooting.
    If that doesn't help, then :
    If you are running Lion, boot to the Recovery HD and run a
    Repair Disk on the OSX partition.
    If Snow Leopard, boot to the installl DVD and run Repair Disk.
    Also, you may want to bookmark this:
    http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
    for future reference.  It is a pretty good explanation of the
    Mac boot process and how to identify where problems may be.

  • My new mac mini does not see usb drives, but in hardware info the usb is visible

    my new mac mini does not see usb drives, but in hardware info the usb is visible
    i'tried several usb flash drives even brand new ones, they are visible onder hardware info but they are not on the desktop nor in the finder.
    what is wrong and doe anyone has a solution ?

    It does not show up in disk utility, its only visible through systeminformation.
    When you plug in the USB flash drive and then refresh systeminformation it becomes visible.
    To remove it I shut down the computer because I cannot eject the USB device anywhere.
    After starting up again when I have removed the flash drive it has gone from the systeminfo USB list.
    By the way my USB mouse and keyboard are working fine, I also changed ports of these and they still keep on working so I don't think the USB ports are defect.
    I guess it some kind software problem, and because I'm new to Apple I do not know much about it how to solve this.

  • The green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct?  Mine does not.  Sometimes it makes the pop-up screen SMALLER.  Appreciate someone solving this for me.

    the green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct?  Mine does not.  Sometimes it makes the pop-up screen SMALLER.  Appreciate someone solving this for me.

    Are you talking about the green '+' button in the top left corner? That technically doesn't enlarge it. It switches the window from the default window size to the custom size you made. You can enlarge the window by moving your mouse to the bottom right corner of the window, and dragging until you get the size you want.
              MacBook

  • ITunes on new Mac Mini does not show shared libraries on network or songs on NAS drive

    iTunes on new Mac Mini does not show shared libraries on network or songs on NAS drive
    The latest version of iTunes on a 3-month old Mac Mini (8 gig RAM, OS 10.10.2) does not see any of the shared iTunes libraries on a  MacBookPro (MBP) (OS 10.9.5) and a 14-month old Mac Mini (OS 10.9.5). And a network shared drive/media server does not appear as well. I have a Gigabite Ethernet G4 and on it, the MPB and the "old" mini I can see the various shared music libraries and NAS, but not on the new Mini.
    The little house with a music note inside it that I see on the upper left corner of the iTunes 12.1 window on my MBP does not appear on iTunes 12.1 on the new Mac Mini. I have gone through all the iTunes preferences and can not find where I can turn on this feature. The new Mac Mini is on the local network and I can reach the internet successfully.
    I have been using iTunes since its beginning (still have a PowerTower Pro with a working copy of SoundJam), so I am not a newbie, but this has me baffled.

    May I add, that I gave full rights to the user at the Mac Mini to access and change data on the server drive for ITunes Media.

  • Why my 2006 mac mini does not receive updates

    Why my Apple 2006 mac mini does not receive updates

    To see if you are ready for 10.5, read:
    https://discussions.apple.com/docs/DOC-2275
    To see if you are ready for 10.6, read:
    https://discussions.apple.com/docs/DOC-2455
    To see if you are ready for 10.7, read:
    https://discussions.apple.com/docs/DOC-2465

  • My mac mini does not want to turn on

    my mac mini does not want to turn on

    See this Apple note: http://support.apple.com/kb/HT2622

  • Help - Mac Mini does not boot after re-install of OS X

    Hi,
    I have a Mac Book Pro and Mac Mini. I needed to reinstall my Mac Mini but lost the install disks. The install disks of the Macbook do not work (machine specific). So what I did was boot the Mac Mini in firewire target mode and installed OS X to it from the Macbook. Worked ok. Except for one thing: The Mac mini does not boot the fresh OS X installation. I get a blinking folder icon with a question mark on top of it.
    I booted from the Mac OS X install disk, repaired disk permissions etc. and tried to use the "Startup Disk" utility to select the hard drive as a boot device. But that utility does not offer me to select the hard disk, it doesn't even show up (while DiskUtility can perfectly see it).
    Any hints for me? I am pretty much stuck right now.
    Thanks

    Well, see, the fact that it wouldn't let you boot from the MacBook install disks should have been your first clue to not try to do it. There's a reason it wouldn't let you. The MacBook install disks contain a version of the OS specific to the MacBook, in order to prevent people doing what you just tried to do (ie, installing the same copy of the OS on multiple machines).
    If you don't have the Mac Mini system disks any more, you'll have to go buy a copy of OS X. You could also ask for help from an Apple Store, if there's one in your area, but I honestly don't know if they would give you new disks. I would think they should (for a small fee), since Mac Mini system disks would be useless to anyone who didn't already own a Mac Mini, but you never know.

  • My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

    My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
    I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
    Reset SMC  no change

    Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

  • My Overdrive for my library books does not allow me to access the book that i am currently reading since IOS7 updated.  also how do i now turn off the apps running in the background that are draining my battery?

    my Overdrive for my library books does not allow me to access the book that i am currently reading since IOS7 updated.  also how do i now turn off the apps running in the background that are draining my battery?

    hey i m working on my illustrator and i m having many problems with my swatches
    for example i use the green phosphorique i don't get this color i get another green
    and many colors too it's like illustrator chooses for you the only green color
    so please i kind of need help i can show you pictures of that i print screen viewed them.. so anybody who can help... pleaaaaaaaaaase contact me because i m having a project now..
    my e mail is [email protected] i would be thankful
    i even tried to download the illustrator on my friend's computer also i m having this problem ....

  • My ipod screen does not light, I can see the icons, connects to itunes but it does not even light up the brightness of the screen. I made it the restoration of production and did not work.

    My ipod screen does not light, you can see the icons, connects to itunes but it does not even light up the brightness of the screen. I made him the restoration of production and did not work.
    Please I need to know what do I have to do.
    Regards

    If you can't enter the passcode then you have to place the iPod in recovery mode and then restore the iPod via iTunes. For ecovery mode see:
    iPhone and iPod touch: Unable to update or restore
    Note that this requires using the sleep/wake button.  If you are not successful then there is nothing else that I know you can do.

  • Mac mini does not boot, no video signal, no chime

    My mini "starts" without chime when I press the power button on the back. The fan starts, the light in front goes on and I hear some clicks which could be the hard drive. The screen remains black (no signal) and the mini does not respond to the USB keyboard power button. It does not start when pressing it and will not power down if I press it for any length of time when it is on. Pressing the power button on the back for some time shuts it down.
    Time to get a new one?
    Ingmar

    You can try:
    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Then try booting from your installer DVD. If still no success then you most likely have a hardware failure.

  • Mac mini does not start up after password is given

    Our mac mini is strating up, but when entering the right password there's coming a blue screen and you return to the login where you have to enter your password. Whe are sure we are typing the right password but the mini is not starting up and every time returns to the login user screen.
    OSX 10.4 and not a intel mini.
    Can anyone please help us.

    Hello, first try this...
    "Try Disk Utility
    1. Insert the Mac OS X10.4 Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • HT1338 mac mini does not burn cds?

    Can't get any burning of cd's or dvd's on the older mac mini that takes has a superdrive built in. It will play discs but just won't burn. I'm guessing I'll need an external device added, and if so what is out there?

    You say "older mac mini," but this is still the "Late 2009" model, correct, not a really old "G4" (pre-Intel) Mac mini?
    What method are you using to burn discs?  Using Disk Utility to burn a disk image to disc?  Using Finder to burn a Burn Folder to disc?  Using iTunes to burn a playlist to disc?  Using a third-party application, like Toast?

  • Mac Mini does not detect DVI monitor on boot but does so on awake

    Hi,
    my Mac Mini fails to detect a monitor on the DVI port when it boots (monitor says no signal).
    If I leave it a few minutes to boot, then put it to sleep and awake using the power button, then the display appears.
    This problem does not occur with the DVI-to-VGA adapter, and I have tried with 2 separate DVI monitors (different brands) and cables (both monitors are fine with Windows PCs).
    I have tried various resolutions and color depths, to no avail.
    Any ideas about how to resolve this?

    What brand and model of monitor do you have?

Maybe you are looking for

  • 10.7.4 AFP bound to 10.6.8 OD for Network home?

    I'm running a mostly 10.6.8 server environment and recently tried to bring a 10.7.4 server into the setup. Open Directory is on 10.6.8 server as is the replica. 10.7.4 server binds to OD master just fine. When I try to set the "Make available for hom

  • Need a Script for Removing User Profiles in Windows 7

    I am in need of a script that will allow me to remotely delete user profiles from multiple computers. I am an IT Admin over around 15-20 computers that are publicly used by many different people each day, and at least once a month we have to go into

  • 10.9.2 update broke my macbook

    I updated downloaded 10.9.2, and chose 'Not Now' to the question about restart. I set a timer on my computer to go to sleep (counting sheep dashboard widget that I've used since Tiger), because I anticipated a long download. I wake up this morning to

  • Report painter - profit center group

    Hi all, How do i make profit center group available in the selection screen before executing the report. or. I wanted profit center group report, while executing the report how to make profit center group as selection Criteria Pls it is urgent.,assur

  • Any SCM-APO ABAPpers out there ????

    Hey folks - In my new job I'm going to have to do some exit/BAdI programming in SCM-APO. Somnath Manna has told me that over in the SCM-APO Forum,  the expertise is primarily functional, i.e. not many "techies" post or respond there. So who's going t