Intel Mac Mini: possible to remove Airport card?

Is it possible to remove temporarly the airport extreme card from an Intel Mac Mini to use the card in another Mac having a free Airport Extreme slot?
That is, Intel Mac Minis have a "standard" airport card already mounted inside, or the built-in airport connectivity is supplied by a specific el.circuit with no Airport card at all?!
Mac mini + iBook Mac OS X (10.4.7)

The AirPort Extreme card in the Mac mini is a "standard" card, not special circuitry on the Logic board...so, yes, it would be possible to remove & replace it.

Similar Messages

New Mac Mini doesn't recognize airport card

I have a new mac mini, leopard, 1.8G c2duo, and have finally resolved some display issues. Now it doesn't recognize my airport card. Ideas?

If the airport card doesn't appear in the System Profiler (select 'About this Mac' in the Apple menu, then click the 'more info' button, then click 'Airport Card' down the left hand side) then the mini likely has a hardware problem and would be in need of repair/replacement. On the other hand, if the Airport Card shows up there, the system clearly can see the card, but it then means there is likely a problem with MacOS or a setting - in which case if you could describe the symptom (ie, where it is you are not seeing the card) then it may be possible to resolve.

Dropped mac mini and now my airport card wont work

hi i dropped my Mac mini a a few days ago and my airport stopd working do you think this is something i could fix my self

Then you have three options:
1) If you have AppleCare, go to a retail store and get it fixed.
2) If you don't have AppleCare, but are still into the warranty period, get it fixed at Retail.
3) If your mini is over 1 year old, and you don't have AppleCare, pop off the case and see if you can fix it yourself. Or take it to a Apple Authorized repair shop.

G4 power brick with Intel mac mini? is this possible just to test?

A friend gave me an Intel mac mini, 1.60GHz CPU model, but no power supply.
I tried using my G4 mac mini's 85W A1105 power supply on the intel mac mini but nothing happens. I have to unplug the power supply from the wall to get it to power on my G4 mac mini (it apparently doesn't like being plugged into the intel mac mini).
Is it possible to use the G4 2005 power supply with the Intel mac mini if only to just test to see if the intel computer works? I don't want to buy a MA407LL/A 110W intel mac mini power supply only to find that the computer he gave me is broken.
Just wondering if anyone had any tips/ideas how to tell if the Intel mac mini works at all or if I'm just going to have to find someone who has the 110W intel model supply to test it...

The G4 mini power supply is rated at a significantly lower current capacity than the Intel mini requires, thus while some have had marginal success in using an old supply with a newer system, almost any tolerance variation will mean the Intel box won't run with the G4 supply. Not only that, but since the Intel system will load the G4 supply at a level it was not designed to accommodate, you could damage your G4 supply by trying.
If you have an Apple store in your area, I would take the Intel mini to the genius bar there where it can be tested, thus avoiding you having to buy a new supply without knowing if it will work.

Intel Mac mini as a faxserver with more then one USB-Modems?

Hi there,
does anybody have a clue if this idea will work?
We plan to buy a Intel Mac mini and someone had the idea to use it additionally as a faxserver - BUT, we'll need more the one fax-line. So, I wonder if it is possible to buy 3 or even 4 external USB-Modem from Apple to use all of them.
Does anyone tried this before?
Any comments are welcome!
Thanks in advance, Chris.
Mac mini Core Duo, 2GB, 120GB Mac OS X (10.4.5)

Hello Chris,
incl. a four line fax-card. Why isn't it a good
choice?
From my experience the Mac's make a terrible fax machine.
I have tried receiving faxes with a 1.8 GHz iMac G5 (with built-in modem), a 2.0 GHz iMac G5 (with built-in modem), and my 1.25 GHz Mac Mini (with built-in modem).
In every single case, and experiment, they dropped the fax after the first page.
So, that means that I've gone round and round trying to get beyond the first page received without trouble.
I do have a real fax machine, and never have any trouble receiving faxes on the same line with it. So, I only use the computer as a fax when I want to only receive the first page (for example the many local doctors who send me their customers private details).
In the case of the doctors, my phone rings frequently with customer's private details. All I want is the first page so I can call the doctor and tell them to quit sending me faxes.
They will send, send, and re-send until a fax machine answers. It keeps the phone busy all day if I don't receive the fax.
But, it costs money to receive the 30-page faxes just to stop the phone ringing. So, I let the computer capture the first page, and then call them and demand that they quit calling me (which works for a couple of days).
You wouldn't believe the information they have sent me. And, with an older doner-film fax, a 30-page document is mighty expensive.
What really gets me, is when they had the nerve to request me to invest even more money and pay to mail the fax back to them. I tell them their free to drive here and get it, otherwise, it's going in the garbage.
I can tell you from experience, that your medical records are not safe with a doctor. They just assume they are dialing the right number, and will send your entire personal history (and even family history - I've received generations of information) to just about anyone with a fax machine.
Anyway, now that I explained how I use mine, I hope you can better understand why a real fax machine is going to serve you better.
The tolerance of a real fax machine will prevent you from constantly trying to receive the same fax over and over and over again.

Dual PowerMac G4 or Core Duo Intel Mac Mini?

Right now I have a Intel Core Duo Mac mini. I have the following setup and specs on my desk. The mini contains the Duo 1.66GHz processor, 2GB DDR SDRam, 80GB hard drive, OS X & Windows XP, AirPort +Bluetooth, and so on. My problem is that I have always been a tower lover and that is why I purchased the Mac mini because I purchased a 20.1 widescreen HD Dell LCD with DVI-D, VGA, Component, and so on imputs. I wanted this for my Xbox 360 also.
Here is where it starts to get complicated. I also have four, yes four, external hard drives sitting on my desk, and I still need more hard disc space. I have a 250GB, 120GB, 250GB, and 60GB. Plus remember I have a 80GB in the mini. I am also looking into another 250GB or 500GB external hard drive.
Now before I had the mini, I had the original iMac G5 which had a 1.6GHz PowerPC G5 processor in it, 160GB hard drive, and 1.5GB of ram. It was showing age and I needed more speed and a bigger display so I ditched it for the Intel Mac mini.
In addition I am pulling 12 USB ports out the back of my Mac mini. I have a few hubs fulling almost all the ports. I need these for the external hard drives. If I go internal, I can probably live with 6-8 USB 2.0 ports. I will need at least 1 firewire or an iSight camera or my Sony HD handycam, but USB is more needed. In addition I see some PowerMac G4's came with Firewire 800? Is this something I would need, I currently however have no use for it.
But now I really see the need of a PowerMac G4 Quicksilver tower. I was looking into the Dual 1.42GHz PowerPC G4 models, and really don't know which is faster. I would obviously love the expandability of the PCI cards, and independed graphics memory, but am I willing to transition back to PowerPC after moving over the Intel?
I don't know so I am posting it all here in the PowerMac G4 section of the Apple forums. I really hope I can get some good advice here. By the way, I am very Apple and technology frantic, so I know the ins and outs of a tower and stuff like that. So a non Apple warrenty would probably not be a problem.
But one problem is, how much could I get for my Mini which cost me $1099 and how much would a decent G4 tower cost me? I have an extra Nvideo GeForce 4 MX 5400 Ultra with 64MB of ram and DVD-D/ VGA outputs, so that isn't a problem. Plus to replace the AirPort Extreme built into the mini, I have a AirLink 101 Super G (108MBPS) Wireless PCI card. Bluetooth can be added with a simple USB dongle.
UPDATE: Forgot the mention I already have a DVD Burner compatible with OS X and 3.5inch bays. I would like a Dual Layer, but if its a tower, I can upgrade that anytime.
UPDATE x2: I would also like to mention that I use Gigabit Ethernet so any PowerMac model I choose would have to acomidate that such as the Intel Mac mini does.
THANKS EVERYONE!!!!
Mac Mini 1.67GHz Intel Core Duo, 2GB ram, 1.5TB storage, OS X v.10.4.6, 30GB iPo Mac OS X (10.4.6)

I would like one day to have a tower with 4-8 HD drives
(120-250GB each) and HD DVD and Blue-Ray burners.
Good luck Even the Dell towers we have at work have space for 3 HDs, and thats only of you give up one of the CD bays.
Honestly, I unless a blueray player ships in the CPU, I would get a PS3. 1/2 the cost of a standalone blu-ray player, and a game system too
Expected street prices from Sony and Toshiba web sites:
standalone Sony blueray player: 995.
Toshiba HD-DVD: 599
Sony PS3 w/ bluray: 499/599
Is the reason the PowerPC G4 can't handle HD DVD is
processor speed or what? Cause there is always
processor upgrade cards up to 1.8GHz and 2.0GHz Dual.
Thanks.
One of the Apple support pages says you must have a G5...
does not give the background behind it.
On a G4, the OS will not allow HDDVD playback (as HD is defined by FinalCutHD) via the DVD player, BUT it will play back HD video clips (like QT trailers)
On my 867, 720i clips played back w/o a problem, but 1080 would freeze for 20 seconds at a time, (while audio continued normally)
on my Dual 1.42, I have no problems with 1080.
I hesitate to consider or recommend processor upgrade cards b/c for some, the price approaches the cost of a new machine w/o the benefits of faster busses, etc, and, right on the side of the OS X box, it says processor upgrade cards not supported. I would hate to upgrade the OS to find it refused to support my machine.

Can't find Laserwriter 4/600 on network from Intel Mac mini

Problem: Cannot find/print to networked LaserWriter using Airport network.
Kit: Mac mini 1.66 GHz Intel Core Duo, 512 MB running Mac OS 10.4.5; Silver Apple Airport Base Station unExtreme; Netgear 814 combined switch/router/DSL modem; Asanté LocalTalk-to-Ethernet Adaptor; Apple LaserWriter 4/600PS.
Method: Airport bridges from wireless (Mac mini) side of network to wired (LaserWriter) side via hub/router.
This setup worked perfectly for many years but did not survive the encounter with Intel Mac mini.
Resolution attempted: Carried out detailed instructions involving switching devices off and on in strict order, using Printer Setup Utility etc.
These instructions are posted on Asanté website:
http://www.asante.com/forums/topic.asp?TOPIC_ID=3164
Getting this to work requires that the Ethernet connection be switched from AirPort to Built-in Ethernet and that the computer be physically connected to the hub by an ethernet cable. The unwanted effect of this is that it denies wireless access to network/internet services formerly enjoyed by Mac & PC computers.
Running the identical Asanté routine with AirPort rather than Built-in Ethernet as the connection method results in the loss of the LaserWriter to the network.
Any ideas?

You can rest assured that printing to a AppleTalk
printer through wireless network is way down on the
list of things that is ever going to be tested in the
labs.
Point taken. I'm just curious about what might be going on.
Since I can't test here - the only thing I can do is
think of possible differences between your two
networks (wired and wireless)
I'm not an expert but as I understand it the Intel Mac mini should "see" the network as a single contiguous entity. In other words the AirPort Base Station that bridges between the wireless and the wired parts of the network should be entirely transparent, so I think the answer to your next question is yes.
Is your network flat (sameIP address range and routes
wireless as wired)? I could see issues if there were
a firewall or you had separate networks set up (you
can have different networks that talk to each other
through gateways and routing - but things like
Bonjour/Rendezvous and if my rusty memory is to be
trusted - Appletalk too - depends on things being in
the same "network" for broadcast packets to get to
everyone.)
Again, I don't know if it proves anything but when I had another computer on network here, the IP address assigned to it by the router was within the specified range. This machine is getting on for three whole years old, has begun to self-destruct and so it's gone for repair under the last gasp of its AppleCare warranty extension.
The Intel Mac mini can also "see"/print to a Bonjour wireless printer. This may also answer your question about the possibility there being two networks here rather than one. On the other hand, I guess that the ability to print to the Bonjour device does not involve any bridging between the wireless and wired parts of the network, so this may not be relevant.
If the concept of different networks does not make
sense - open up the Network Utility application and
post the results of your "Display routing table
information" from the netstat section...
Finally, here's what Network Utility, Netstat comes up with:
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.0.1 UGSc 20 55 en1
127 localhost UCS 0 0 lo0
localhost localhost UH 17 199665 lo0
169.254 link#5 UCS 0 0 en1
192.168.0 link#5 UCS 2 0 en1
192.168.0.1 0:9:5b:46:64:3 UHLW 19 17 en1 1177
192.168.0.3 localhost UHS 0 0 lo0
192.168.0.255 link#5 UHLWb 1 12 en1
Internet6:
Destination Gateway Flags Netif Expire
localhost link#1 UHL lo0
localhost Uc lo0
localhost link#1 UHL lo0
link#5 UC en1
ray-thomsons-compu 0:14:51:ef:99:b1 UHL lo0
ff01:: localhost U lo0
ff02::%lo0 localhost UC lo0
I hope it makes more sense to you than it does to me!
Kind regards,
Ray
PowerBook G4•1GHz•512MB•15•AirPort unExtreme Mac OS 9.2.x

Bluetooth Not Available on Intel Mac mini

I keep losing the Bluetooth wireless connection between my Apple wireless mouse and keyboard and my Intel Mac mini (which is running Mac OSX 10.5.5)
Tried re-booting but it doesn't always come back.
Looked in System Preferences, but if the connection is lost, Bluetooth has disappeared as if not installed. If the connection is present then all seems OK. You can check battery levels etc.
Left to itself Bluetooth can re-appear sometime later as mysteriously as it disappeared, maybe after half an hour or so. Very annoying as I have to result to using an Apple USB mouse and keyboard when the connection is lost.
Tried running Bluetooth Updater but it says I haven't got Bluetooth if the connection is lost! But it came pre-installed on purchase. Problem only seems to have started since upgrading to Leopard. Never had this problem with Tiger.
Any thoughts would be most welcome.
regards,
BJ

Ok, I've resolved this on my machine, at least for the time being.
Here is what I did. I am not advising anyone else to do this and I am in-no-way stating this will fix your problem. I'm just relaying what worked for me. If anyone chooses to try this then it's on their own head!
I opened my Mac Mini and located the Bluetooth circuit board just in front of the rear power button. I removed the small phillips screw holding the board in place and noticed that the connector that connects the board to the main motherboard was not seated well. I removed the connector and reattached it, making sure I felt the 'click' as the connector was pushed home.
I had also read on the net that the routing of the bluetooth ariel cable may cause problems due to interference from the USB ports. I took the opportunity to extract the ariel and run it over the disk and away from the USB ports. Before putting the lid back on I booted up to check Bluetooth was working again.
So, I now have my Mac Mini with Bluetooth working again. We shall see how long this lasts - perhaps the root cause was a loose connection, in which case it may be fixed permanently now. I shall report back in a few weeks.
Be aware that opening your Mac is going to invalidate any warranty. Mine was out of warranty anyway so I was not bothered. I've also got a degree in software and electronic engineering so know my way round the insides of computers. Please make your own assessment of your level of expertise before deciding to try what I did. It may not work for you anyway!

Intel Mac mini and widescreen TV output (analog)

I just replaced my 1.25 GHz mini with a dual-core Intel one, and are really disappointed that the wide-screen resolution options are nowhere to be found. I'm using the Apple DVI-to-Video adapter with an S-Video cable.
On the G4 Mac mini, I would get 640x480 (NTSC 4:3), 800x480 (NTSC 16:9), 768x576 (PAL 4:3) and 1024x576 (PAL 16:9). Together with Overscan and Best for Video, I got a really nice picture on my 16:9 CRT TV (can display PAL and NTSC in either 4:3 or 16:9).
With the Intel Mac mini, I only get 640x480.
(The other available resolutions do not match with the actual NTSC or PAL frequencies or aspect ratios. For example, 720x480 or 720x576 is used as the pixel format for some digital media, but the pixels are not square, and so far, all software expects display pixels to be square. So it's actually quite useless.)
Is there a trick to get those resolutions to show up in Displays and become usable?

1.) I am using either 1920x1080 (interlaced) which is the resultion that has the worst problem with text sharpness. Now, I have discovered the Zoom feature in OSX and I can use it to some degree to make things readable. This may be my best option.
2.) I have done the calibraton and it does look quite a bit better. Those the DVD output is good but not great.
3.) Apparently, from what I have read, this is a common problem. Maybe a driver upgrade from Apple or Intel could fix?
I bought a Philips DVI cable. I know it's not the best but it should suffice. Monster cables seem to be overpriced. I plan to hook my PC to my HDTV with the same cable. My ATi card supports HD resolutions as well.
I also hooked the mini to my CRT that I have on my Dell and it looks very good there. I am impressed that OSX adjusts the resoltions that it can display upon boot. Even which switching displays.
Intel Mini Duo Core Mac OS X (10.4.5) 512MB RAM

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06 Intel Core Duo
I can't figure out how to get this to work. Is it possible?

WildBull wrote:
Will it work if I connect via usb instead of firewire?
No. There is no "USB Target Disk Mode".
Just so we're clear, when you start your Mac mini in FireWire Target Disk Mode (TDM - holding T on startup), do you see a FireWire icon on the Mac mini's display? IIRC, it's not required that the Mac mini be connected to a display for TDM, but it would help diagnose whether or not the mini is actually starting in this mode.

Using External Boot Drive with New Intel Mac Mini

I have a 1st Gen MacMini and use an external 7200 RPM Lacie drive as the system boot drive along with all the applications.
If I were to purchase a new Intel Mac Mini, is it possible to use the current external drive as the system drive or is there some conversion steps that would be necessary ?
Thank you.

You can use the hardware, but will have to repartition and reinstall the OS from the disk shipped with the new Mac Mini.
http://docs.info.apple.com/article.html?artnum=303220
If you create a disk image of the Lacie on your Mini, you can later use setup assistant to restore users and applications from that image.

How can I tell if I have the right restore disks for Intel Mac Mini

I have an "early 2006" (confirmed by S/N YM609***) Intel Mac Mini 1.66mhz Core Duo. I bought it used and the hard drive had been wiped. Both the HD and the DVD drive seem to work fine; hard drive passes SMART tests. I was able to boot using "Drive Genius" and can access the pre-install items like Disk Utility (and know that I need to use GUID formatting to create a bootable disk). Not knowing I could order restore disks from Apple I bought a set on eBay, p/n AHT VERSION 3A102 DISC VERSION 1.1 2Z691-5828-A, copyright 2006 on disks and included documentation (OS 10.4.6), but the install always fails 10-15 minutes along. I got the same results when trying to install via internal optical drive to a FW or USB external HD (told it to use GUID for the external HD), or external FW optical drive both to internal HD and to external USB hard drive. A friend tried to install full retail versions of 10.5 and even 10.6 for diagnostic purposes, using the built in HD and DVD drives, but those installs did not complete either; they did not try external drives. Is that the wrong restore version for this model, or even if the right "generation", does a set of restore disks only work with the specific Mac mini they were issued for like for example XP restore disks would? I've been told I can provide my s/n to Apple and for about $30 they will send me the "right" restore disks... anyone know anything about this? Could there be a hardware/firmware explanation for why the install fails like that? PS ran the extended version of the Apple Hardware Test with that restore disk set and it reported "no problems."
<Edited by Host>

Thanks. Actually I got the Mini from a computer recycling company I work with so I knew it might have problems and that I was taking an "as-is" risk. If the original disks were turned in with it, they'd been lost (that outfit took in huge piles of stuff every day; it was often luck of the draw for me to find something before it would be buried, damaged, etc., and not everyone who worked there had any idea of the possible value of things they received) for me to find things. The disks I got on eBay apparently were separated from the mini they'd been packaged for. An Apple Store rep said I could order restore direct from Apple just by providing my serial number; just wish I'd known that before I went to eBay. Since posting this I've seen another seller specifically claiming that the same-part-numbered-as-mine disc set they are selling will work with my specific type of Mac mini. I have an appointment tomorrow morning at the Genius Bar at an Apple store near me in case they have more suggestions. Will share what I know as things develop.

The Intel Mac Mini uses on-board graphics... how good are they?

I'm seriously considering getting an Intel Mac Mini and telling all my friends to get one, too. However, there's one problem - the graphics.
The whole reason I'd want an Intel Mac would be so that I could dual-boot into Windows Vista (when it comes out) in order to play the latest games.
How suitable are the on-board graphics for gaming? Would it be able to play Halo and Command & Conquer Generals well?
Basically, I want to know if it's the equivalent of a 64 MB graphics chip in speed, or if having on-board graphics makes it a bit slower. Does it have hardware acceleration? And is it suitable for smooth casual gaming at an average resolution?

I am very uneasy about finding integrated graphics in the new mini too.
When I first saw the new Mini website on Apple's website I was so excited "intel processor", "4 usb ports", "faster drives" but something was missing from the website; the "graphics" sub-category. I instantly wondering what was up with that, thinking right away obviously the graphics weren't good enough to brag about. I was right. On Apple's MacMini website, on the "Intel Core" sub-category page, bottom of the page, right side there's a weee comment on integrated graphics, "oh." was my only thought.
It's really disappointing to see integrated graphics in the new Mini. That AND the increase in price. The price of the Intel iMac dropped by $100 when it got introduced, but the Intel Mini's price goes up $100 upon introduction, further closing the price between the iMac and the Mini and making the iMac looking more and more attractice in terms of features-performance-price-value. I better run out and buy a Intel iMac before Apple removes the miniDVI-out port (which I'm predicting it will be removed in the next iMac revision)
Hopefully some Intel MacMini review tests in the coming weeks will reveal better-than-expected graphics performance.
I'm surprised nobody else has mentioned this but... doesn't anyone here see that Apple has given us a preview of what's to come by putting integrated graphics in the new Intel MacMini? -- Anyone? I'll tell you -- we're going to see the exact same integrated graphics in the upcoming Intel iBooks, that's what.
Mac Mini Mac OS X (10.4.5)

Best app for QT on Intel Mac Mini kiosk?

Hi all:
I've sent variations of this message off to various folks and fora pertaining to Flash, Director, Livestage, etc., so I thought I'd ask here as well.
I'm working on a very high profile exhibit here in NYC, which is opening to the public on Sept. 11th (draw your own conclusions). It involves a number of standard definition (not HD) video-based kiosks.
These are running on bottom of the line off-the-shelf single-core Intel Mac Minis w/ 512MB RAM. No, we cannot change the platform. We have to make it work with what we have.
We built our prototype in Director. Unfortunately, using QT in Director projects on Intel-based Macs is a non-starter, because Director executables are not Universal Binary yet.
The app is very simple -- a black background that just waits to trigger the video on a mouse click and returns to the black background when the movie is done playing.
The key thing is we need to display the highest possible image quality. We had hoped to use H.264. We've also tried 3IVX and Motion JPEG B, all of which play beautifully in the QT Player but stutter noticeably once in Director. This turns out to be a known problem, and a Universal Binary version of Director isn't due until next year.
I've also tried making a QuickTime Media Link (QTL) file that allows us to "quit when done" so that we can use BuddyAPI to open the program with the QT Player and then drop back to the Director app when done.
That works great, except for the fact that as of OSX 10.3, you can't hide the menu of an app when switching to another app, which looks terrible. Arrgh.
Flash's Player v9 (which is Universal Binary) only runs in a Browser, not as a standalone. So unless there's a browser that will run fullscreen with no chrome, that's out for the foreseeable future as well.
So now I'm thinking about building the whole thing as a self-contained QT movie in Livestage.
Livestage only runs in Rosetta, so I don't know if the QT file I build run natively in the QT player, so that I can use h.264 or 3IVX or whatever without it stuttering. I'd be perfectly happy w/ 3IVX, by the way...
Any help or direction appreciated. We have to have this up and running on site by next Monday, the 14th.
best,
FBC

Right -- well, I'm not concerned with editing the video (I use FCP, too).
I completely understand the role of bitrate in making videos look good, and for the record, I've gotten decent looking videos from Motion JPEG B at the Medium (default) quality settings...
But that's not my question here. The problem is playing back any QT codec as an asset in a larger application (eg, Flash, Director, Livestage) running specifically on the Intel Mac Minis. At the root of the problem is lack of universal binary projectors.
At the moment, the best option I have so far is using SAFT to put Safari into Kiosk mode (no title bar, etc.) and using that to play back a Flash SWF file (which give me the needed interactivity) as the default home page.
We're also going to try to roll our own Cocoa app as a wrapper for a 3ivx file. That will almost certainly look better than even a very high bandwidth FLV/SWF.
Any other ideas appreciated...

Blinking Green Light! Mount & Unmount on Intel Mac mini

Hi all.
This is my sister's iPod shuffle, lat night she plugged into her new Intel Mac mini Core Duo, and the shuffle mounts, everything appears to be in working order, she said today she still listened to it.
Just now she accidently plugged the shuffle while in our Dad's account (on the Mac mini as well), then seemed like "all well broke loose", this is what she told me, first iTunes was not responsive, colour wheel, so she restarted but only arrived at the blank desktop and only the shadow of the Top Menu Bar
I reset the iPod shuffle, was successful in plugging it in, quit iTunes (all in her own account now) and update the shuffle software.
When inside iTunes, once I started Autofill, it suddenly unmounted by itself, followed by the red exclamation error message when you accidently remove an external device unproperly.
When I tried plugging in again, it refuses to mount. Just blinking Green, or pull out again, blinking Yellow.
Now I plug it into my own iMac G5, and it mounts and is blinking slowly with yellow light, what seems to be normal charging.
Has this something got to do with the Intel Mac??
Thanks and cheers

This probably has nothing to do with the Mini, but everything to do with the Shuffle. Like all flash memory, it is susceptible to damage if unplugged at the wrong time.
For the shuffle, you cannot remove it while it is updating or in Disk Mode. This warning is presented in the User's Guide and is repeated in several other places throughout the Support pages as well.
The general rule is: If it's blinking amber, don't unplug it before you unmount it. Unmounting can be done either in iTunes or in the Finder.
About all you can do, given the symptoms you're seeing, is try to Restore it. See the instructions in the User's Guide and/or on the iPod Shuffle Support Page.

Intel Mac Mini: possible to remove Airport card?

Similar Messages

Maybe you are looking for