Intel Mac Mini won't Shutdown or Restart

I have searched the forum with no joy.
Apple/Restart/ OK
Wait 60 seconds
Reports random app not closing/OK
Close all apps.
Apple/Restart/OK
Wait 60+ seconds
Menu Bar shutsdown, Dock still visible
Reports Finder will not close
Only way out now to Power off.
Once rebooted it still will not restart or shutdown without pulling the plug.
How can I make this machine Restart?
Any ideas please
Thanks, it's my wife's machine and she is getting pissy

Now to find out why every time the mini reboots it requires me to specify the wireless network to attach to.
In System Preferences Network pane, select Airport in the sidebar. Click the Advanced button. In the Airport tab, your wireless network(s) should be the only one(s) listed as Preferred Networks. Make sure the check box for +Remember any network this computer has joined+ is checked.
Back in the main Network pane, if Airport is the primary networking service being used, it should be at the top of the list of services. You can change the order by clicking on the little gear icon and selecting +Set Service Order+. You may also want to remove any networking services you do not use, such as FireWire and Bluetooth.
For the Time Machine, how about opening System Preferences +Time Machine+ pane, clicking on +Change Disk+ button and reselecting the Time Capsule disk.

Similar Messages

My Mac Mini won't shutdown it keeps restarting. Help!

I have brought my Mac Mini a week ago, the basline model (new 2012). I go to shut it down and it just reastarts and show me the screen saying there was a problem, I can't reslove the issue, and I had to result in holding the power button down. What is the issue that I ama having?

I used to run my Mac Mini (2012) with Lion and XBMC under my 32" Samsung TV and never had an issue with shutting it down.
I then upgraded to Moutain Lion via upgrade and moved my Mac mini to my office with my 24" Samsung TV...
Then I noticed my Mac Mini would reboot when I was screen sharing and I tried to shutdown...
This is annoying when you are using it remotely.
So being a techie sort of guy I went overkill and did the follwoing:
- Wiped the HDD
- Did a fresh install of Moutain Lion
- Cleared the NVRAM (Rebooted 10 times)
- Cleared the PRAM (Rebooted 10 times)
The shutdown problem still persisted....
My conclusion was it must have been upgrading the OS from Lion to Mountain Lion however my work colleague (mockingly) pointed out that in the forums someone said is to do with the HDMI.
I ran tests:
24" Samsung TV Powered On - HDMI Connected - Shutdown (Issue occurred)
24" Samsung TV Powered Off - HDMI Connected - Shutdown (Issue did not occur)
(To test this I turned the tv off and watched what I was doing via Screenshare)
24" Samsung TV Powered On - HDMI Connected - Shutdown via Screen Sharing (Issue occurred)
24" Samsung TV Powered Off - HDMI Connected - Shutdown via Screen Sharing (Issue did not occur)
HDMI Disconnected - Shutdown via Screen Sharing (Issue did not occur)
- So I ran further tests!!!!
32" Samsung TV Powered On - HDMI Connected - Shutdown (Issue did not occur)
32" Samsung TV Powered Off - HDMI Connected - Shutdown (Issue did not occur)
(To test this I turned the tv off and watched what I was doing via Screenshare)
32" Samsung TV Powered On - HDMI Connected - Shutdown via Screen Sharing (Issue did not occur)
32" Samsung TV Powered Off - HDMI Connected - Shutdown via Screen Sharing (Issue did not occur)
It looked like it was the 24" TV however whilst I was testing with the 32" TV I got annoyed that the menu bar was off screen so I turned the resolution down from (1920X1080 @60hz) to (1360 x 768 @60hz), shutdown, and on the second shutdown the issue occurred!!!!!
So I checked my 24" TV (1360 x 768 @60hz) was the original resolution.
I have changed it to 1600 x 900 and no shutdown issue on the 24" TV!!!!
So the resolution 1360 x 768 seems to be the problem!!!!!!

Intel Mac Mini stuck in reboot loop

I just upgraded the hard drive in my 2007 intel mac mini core duo. Drive formatted successfully, contains GUID Partition Table.
OSX 10.5 installed successfully.
Machine rebooted, I ran software update to 10.5.7 successfully.
Upon installing Adobe Flash Player, Adobe Acrobat Reader, machine began to react slowly to commands.
Rebooted machine, went to Grey Apple Screen with spinning dash wheen icon.
Machine rebooted itself, once again going to the grey apply screen with the spinning wheel.
After about 15 minutes of letting the continual reboot cycle happen, I inserted the installation DVD for 10.5, held the power button in to power off the machine, and booted from the disk.
I ran disk utility. Disk Utility shows the hard drive, shows the partition (GUID Partition) correctly.
I Verified Disk, which verified as "OK"
Repaired permissions.
Restarted machine.
Once again, it loaded to the grey apple screen, stayed there with the spinning dash wheel for about 3 minutes then continued to reboot over and over (everytime it reboots it sticks on the grey apple screen for 3 minutes before rebooting.
I once again powered off the machine and reset the PRAM.
Machine stuck again on reboot cycle.
I powered off the machine and reset the mini's SMC.
Machine is still stuck in reboot cycle.
I have also taken the mini back apart and verified that all RAM and connections are seated properly.
Any advice on what to do at this point will be very helpful.

+And I promise I will not download and install a hundred different programs this time.+
Good idea.
Any time you install software in OSX, there is a small, but finite, chance that the installation process won't be able to access a needed file because it is in use. This can mess up pre-binding, or even prevent files from being updated.
So the best advice is not to run any other programs while doing software installs or updates. And when in doubt, run DiskUtility afterwards and fix permissions one more time.
I cringe whenever I think of a post I read a while back about a Mac user who boasted about what music he likes to run in iTunes while doing system software updates. Not a good idea. It's "Russian roulette" with maybe 99 blanks in the "gun", but one real bullet that can kill your Mac's installation.

Intel Mac Mini Core Solo - Kernel Panic on Boot

I was wondering if anyone who has purchased the Intel Mac Mini is having issues with Kernel Panics during the booting sequence?
I got a Core Solo from the local Apple store (couldn't wait to play, I'm waiting on the Core Duo I ordered online to come still ). The first thing I did was fire it up check it out for a few minutes, then I put the install disc in and reinstalled a clean OS, with less options because I'm planning on hooking it up to my TV so I don't need space hogs like Garageband etc on my TV computer. I got the updates that popped up, then shutdown the computer. I took it out to the living room and hooked it up to the tv and I got a black message about needing to restart (a kernel panic) right when the blue progress loading bar comes up on boot. I spent a while with it trying to figure out what was wrong, ran the Apple Hardware Test, booted it fine in Safe Boot. Finally I got tired of it and reinstalled the OS again.
It was fine for a day, working fine out on the tv. I brought it back in my room to play with a few things like Darwine, etc. Shut it down, came back an hour or so later booted it up and got the kernel panic on boot. Safe boot still worked fine. I spent some time trying to look for panic logs but didn't see any. I ran the disk utility and did a Full erase and it worked fine. I reinstalled the OS again. Ran MemTestOSX and it worked fine. I left it running the Apple Hardware Test for about 6 hours or more, and it performed perfectly.
This morning it still seemed ok, except sometimes on a cold boot when the blue progress bar screen should come on... my monitor just shows black and the light on the monitor goes inactive. So, I press the button on the back to sleep it, then bring it out of sleep with the keyboard and the OS is sitting there booted.
It seems like a weird combination of software and hardware problems, but maybe it's all hardware problems. I can't get past Safe Boot working when the OS stops loading. Right now the computer is working fine.
I'm waiting for my Core Duo to come in the mail and verify that it works flawlessly, then I'll take the Solo to the store and ask them to look at it.
Anyone have any similar experiences so far?

It seems like the mini is doing alright so far. I think maybe the full erase solved whatever issue it was having. I also got my Core Duo Mini yesterday in the mail and it's performing like a champ. Definitely a nice machine.
I'll close my question for now, since the Core Solo Mini seems alright. But, as a warning don't get on Front Row's bad side. I tried force quitting it because it was taking too long to load the videos folder and then tried shutting down from a terminal and ended up having to turn the machine off.

Normal + 3 chimes at startup with intel mac mini

I posted this in the mac mini forum, but didn't get a helpful response. So maybe someone can help me here.
I have a 300GB USB drive (formatted as Mac OS extended (journaled)) connected to my intel mac mini with the drive's power on all the time. When I start up the mini after the USB drive has spun down I get the regular startup chime plus 3 lower volume startup chimes. The activity light on the USB drive flashes during the 3 chimes. Then the system starts normally with the USB drive icon on the desktop. I can read and write to the USB hard drive with no problems.
If I shutdown the mini and start it up again but now the USB hard drive has not spun down, I get just the normal single chime. Also, if the USB drive is disconnected, I get the normal single chime. I've tried a different USB port, but still got the same behavior.
I've connected a USB flash drive, but it exhibits normal behavior, that is, just the single startup chime.
Are the subsequent 3 chimes at startup OK and just telling me that there is an external hard drive? Or is there a looming problem? Has anyone else experienced this?
Intel Mac Mini Core Duo Mac OS X (10.4.7) Apple BT Mouse & Keyboard

Thanks. But the article says you won't hear the normal startup chime but some number of beeps if there is a problem with 3 beeps meaning no good banks.
I hear the normal startup chime, then 3 of the same chimes but at lower volume. Must be something about the USB hard drive.
When I bought the drive, it was formatted for windows with NTFS. I used disk utility to format is as Mac OS Extended (journaled). I've copied about 100 GB of data to it.

Won't shutdown or restart unless hard boot - SMCFanControl Application

I have quite a bit of installed hardware so I thought SMCFanControl would be a good idea. However, it seems that I can reproduce a problem I'm having when utilizing the SMC app.
Problem:
1. Won't shutdown or restart unless a power boot is performed
2. Many applications lock up and won't even force quit.
3. Can't reboot locked apps after force quitting when I re-click in dock.
Noticed:
I don't seem to have a problem unless I've at some point started ( or even after I've manually quit ) SMCFanControl. BTW I don't have it to start on login. But once I've used SMC after booting, no matter what, that is when the issues seem to begin. So I tried quitting prior to shutdown. Didn't work.
Question: Has anyone else experienced unexplained lock ups, non forceable quits on apps, no shutdown or startup without boot, whom also has SMCFanControl? Has anyone found a solution to this problem as I REALLY NEED some sort of cooling mechanism. Because without SMC, I'm running about 150 farrenheit and I can't get the room any colder without locking up myself!
P.S. I've tried resetting the PRAM or VRam or whatever Ram is reset when you power up, holding the power button in while then pushing Command, Alt, "R" at the same time until it does that long beep.
The only solution found so far is unnacceptable, which is leaving SMC turned off permanently.
Thanks,
Videoguy_511

Well Bababooey if you're comparing yourself to a Apple Genius Bar then you should already know my answer, your snarky remark get a snarky reply. Why would I go to a salesperson to fix my computer problem when I can go directly go to the source itself. I used to sell Apple computers over 8 years ago and was apple certified before the Genius bar existed. If I am to go about fixing an issue I can't fix on my own I will go to the source itself meaning Apple's programmers and developers - being UI UX Developer myself I know they should have QA'd all platforms and troubleshooted any arising issues.
This was also the first time in the 20 years I've been using a Mac that I even attempted to go on this forum which i thought would put me in connection with a certified Apple representative. This turned out to be a complete waste of time just being a public forum with no Apple employee involved. I was hoping to find a quick fix but in turn I was only frustrated with stupid responses such as yours that were in no way an answer to my original question.
BTW I fixed the issue on my own and without your help or Apples help. I'm glad if all forums point here regarding this issue because I now have the answer. The answer I was looking for from someone earlier was as simple as this {Download Maverick and reinstall the platform - it will take an hour to do but afterward 10.9.2 was installed and my computer is now able to shutdown and restart without having to do a hard boot.} No more software update bar at top and no problems with my drive which I told both you and Grant - I know my computer better than you and I've probably been using them longer than you.
So again Babowa you were so wrong...... and I am right.
Again anyone having the same problem, I suggest reinstalling Maverick and you'll be suprised 10.9.2 will work fine.

Mac mini won't boot - keyboard shortcuts don't work

Older Intel Mac Mini that I use as an entertainment / movie center. Leopard.
I did a software update recently, but somehow botched it and interrupted the process.
Ever since then, it won't start up correctly. It chimes, disk powers up, but then it gets stuck on the screen with the apple and rotating propeller. Can go on for hours if you let it.
Took it to a dealer, who said it started up fine from another system an I should try starting it in target disk mode an reinstall the OS.
Bought a USB keyboard specifically so I could press the T and tried it.
It seems that none of the keyboard shortcuts work. I tried target disk mode (T), starting from a system disk (C), tried having it give me a choice of bootable volumes (Option) - nothing. It would appear the Mini doesn't recognize my brand new Apple USB keyboard.
Tried the keyboard with my MacBook and there it works fine.
Any ideas?

OK, just found the answer while browsing the "more like this" answers that appeared after I posted my question.
I wasn't aware that the new Apple Aluminium Keyboard doesn't play nice with the Mini and that the Mini doesn't recognize this particular keyboard in time for the boot sequence.
Thank you for these helpful discussions:
https://discussions.apple.com/message/9306774#9306774
https://discussions.apple.com/message/9084810?messageID=9084810
https://discussions.apple.com/thread/1477855?threadID=1477855&tstart=0
Using the remote (press the menu key during boot-up) worked fine and I could choose to boot from a system disk.
Spending $60 for a new keyboard that won't do what I bought it for is, however, another story. Grr.

Mac Mini Won't Boot Up After HD Upgrade

So I have a Mac Mini 1.5GHz Intel Solo. I recently maxed it out with 2GB RAM and a 500GB Hard Drive. My problem is, when I start it up with the install disc all that appears is the folder icon with the question mark. Tried restarting holding down "C" and the same thing happens. I tried booting up with the install disc that came with my MacBook Pro with Leopard, and it gets me through to the main screen but then it tells me that this software cannot be installed on this computer. But I was able to format the Hard Drive. So I tried the Tiger install disc and the same folder question mark icon came up. Any ideas?

+"I have the install discs that came with my MacBook Pro, Leopard, tried those on the Intel Mac Mini and that's when it let's me choose a language but then a window saying the software _cannot be installed_ onto this computer pops up."+
+While _the same version of Leopard can run on Intel and PPC_, Tiger requires a different version for Intel than for PPC.+
The distinction is between installing vs. running.
Macs have generally not allowed install discs from one model to be used to install on an other model.
But an external Leopard bootable hard drive (with the correct partition map) can boot either Intel or PPC Macs capable of running Leopard. Of course the partition map has to be GUID for Intel, and APM for PPC -- and PPC Macs can only boot from firewire externals or from internals.

Someone tell me why is it so difficult to print from my Intel Mac Mini

I'm so frusrated at this Intel Mac Mini of mine. I wish honest to God that I never bought this evil little machine.
I have the following printers:
HP Photosmart 7550
HP Laserjet 1012
Canon MP830
I can't get anything to print! It so **** frustrating. I switched my wife from her WinXP to a Intel Mac Mini (10.4.6). She hates the Mac Mini because she can't print anything.
Why is it so difficult? Please someone enlighten me.
After months (not kidding) of searching on the web I was able to get the Photosmart 7550 to print using one of the gimp drivers, but I couldn't get it to change the paper type or quality. So that tells me I can't print any photos from my Mac. Need to use the WinXP box.
Then I was able to get the 1012 printing by selecting "open using rosetta" for the Printer Setup Utility, and selecting the "HP LaserJet 4 series - Gimp-Print v5.0.0-beta2". So now I could at least print BW docs. Great the Mac Mini is not a total waste. Then I updated software, which include the Mac mini SMC Firmware Update. I don't know what did it, but now I can't print to the 1012 anymore. ARGHH!
I tried deleting the Library/Printer/HP directory, Reseting the Printing System, Restarting the CUPs, Installing PDDs, Installing the gimp drivers. What the ****! Why do I need to do any of this? I thought the Mac was suppose to be so easy. With all those **** commercials talking about how the Mac can do anything a PC can do, you would think one of those things is being able to print.
Those people making those commericals should try using the "Printer Setup Utility" program. That will change their tune. First you have to search for your printer, then pick the Printer Model, and then pick the specific model. And God forbid you click to fast, oops you've now picked a generic printer, needs to start all over again. There's no back button. You've already committed to the generic printer type. Now you have to open the Printer Setup Utility again and delete the generic printer and go search for your printer again. Lame.
Don't get me started with the Canon MP 830. I thought, ok maybe its because the 1012 and 7550 are older printers. I'll go buy a new printer - they must have current drivers for that. Canon tells me that the MP 830 is only a single OS machine, meaning you can only connect it to a windows machine and only other windows machines can print from it, or connect it to a Mac, and only other Macs can use it - Again, Lame.
Really I wanted to love the Mac OS. When I first got it, I was loving it. But what good is it if I can't print. I searched the web and it seems I'm not the only person having issues with printing.
I hate this Intel Mac Mini with every fiber of my being. Ok, maybe my printing woes are only because it's a Intel chip, and the PPC macs are golden. But come on, if you can't print from a computer, what good is it?
Please, someone help me. Otherwise, anybody want to buy a Intel dual core Mac Mini?
mac mini duo core Mac OS X (10.4.6)

You have two different issues: HP and Canon.
I don't know if I believe the Canon people. Windows XP has lots of different print options. Try installing Bonjour on Windows and then setting up a networked, Color Apple Laserwriter PS printer using "http://macmini.local:631" (assuming macmini is the name of your Mac). I have done this before (though not on a Canon). I am sure Canon will only support a standard configuration and this is not quite standard. Give it a try. It doesn't sound like it can hurt anything in your current setup.
For the HP, you might have to just wait for an updated driver from HP. HP has always had this problem. They are a huge printer company and I'm sure they get Apple hardware and OS versions before anybody else in the world. And yet, it seems as if they don't even begin working on their drivers until Apple officially releases a new OS. HP drivers are always the last to show up for a new OS and the first to break. If you get it working under MacOS 10.4.6, and then upgrade to 10.4.7, it is very likely that the HP drivers will stop working.
Unlike some of the other big companies, HP seems to have made the transition from Classic MacOS to MacOS X seamlessly. Their printer driver software works just as well on MacOS X as it did under MacOS.

Blinking Green Light! Mount & Unmount on Intel Mac mini

Hi all.
This is my sister's iPod shuffle, lat night she plugged into her new Intel Mac mini Core Duo, and the shuffle mounts, everything appears to be in working order, she said today she still listened to it.
Just now she accidently plugged the shuffle while in our Dad's account (on the Mac mini as well), then seemed like "all well broke loose", this is what she told me, first iTunes was not responsive, colour wheel, so she restarted but only arrived at the blank desktop and only the shadow of the Top Menu Bar
I reset the iPod shuffle, was successful in plugging it in, quit iTunes (all in her own account now) and update the shuffle software.
When inside iTunes, once I started Autofill, it suddenly unmounted by itself, followed by the red exclamation error message when you accidently remove an external device unproperly.
When I tried plugging in again, it refuses to mount. Just blinking Green, or pull out again, blinking Yellow.
Now I plug it into my own iMac G5, and it mounts and is blinking slowly with yellow light, what seems to be normal charging.
Has this something got to do with the Intel Mac??
Thanks and cheers

This probably has nothing to do with the Mini, but everything to do with the Shuffle. Like all flash memory, it is susceptible to damage if unplugged at the wrong time.
For the shuffle, you cannot remove it while it is updating or in Disk Mode. This warning is presented in the User's Guide and is repeated in several other places throughout the Support pages as well.
The general rule is: If it's blinking amber, don't unplug it before you unmount it. Unmounting can be done either in iTunes or in the Finder.
About all you can do, given the symptoms you're seeing, is try to Restore it. See the instructions in the User's Guide and/or on the iPod Shuffle Support Page.

New Intel Mac Mini Start-up Problems

I've recently purchased a new Intel Mac Mini (my first Mac after switching from a PC). Several times (probably once a day), the mac mini won't start-up.
I've noticed it happens after I've used iPhoto or iDVD. The mini becomes busy and performance seems to slow. After the software has finished its task, I can exit the application fine and shut down the mini.
When I then go to boot the mini, the little blue light comes up, but nothing else happens. It's almost as though it's in sleep mode (which it isn't). I've tried different ways to wake it using the keyboard, mouse and start button, but nothing.
The Mac Mini will only start-up again if it is unplugged from the mains and left for several minutes.
Has anyone else had this problem? Is there something I'm doing wrong that my lack of Mac knowledge may not be aware of?
Any help would be appreciated.
Thanks

I have been frustrated by the same issue. My (admittedly non-professional) diagnosis is that the problem is related to heat build up. I am able to boot normally only after forcing a hard shut down and waiting for "a while" (5 minutes is not enough, 30 minutes does the trick). Thus my hypothesis that an appropriate cooling down period is needed.
Any similar thoughts? I'm calling Apple today...

Intel Mac mini: upgrading questions...

Hi, I'm going to buy the new intel mac mini but I'm a little afraid for the graphic card inside the tiny machine...
What about music recording? (GarageBand, Logic Express...)
What about games? (Doom3, The Sims...) It's better than the nVidia 5200 that was inside the first gen of iMacG5?
What about video editing? It's the Mac mini fast enaugh to perform simple video operations or I need a more powerful computer? Maybe the new iMac?... Please help me!

I can't tell you about games, though if you scan through these Discussion threads in the next week or so I'd bet you'll find plenty of references to game playing on the new mini as people buy them and try them out. At the present moment, having only been announced a couple of days ago, there aren't many of the systems in actual use yet, so there's not much information to go on.
But it has to be said that it has always been a mistake to assume the physical size of the system reflects anything of it's capabilities. The PPC mini that has just been discontinued and which was slower and more limited than the new system appears to be was perfectly capable of running such things as Garageband, and doing complex video editing projects, so there's absolutely no reason to assume the new mini won't be more capable. The fact that it has an integrated graphics processor that shares RAM with the CPU has got a whole lot of people in a tizzy, but despite the comments some are making about it, they don't have any first-hand knowledge (as yet) and thus have no clue how well or badly it performs.
I'd urge you to find one of these systems in a local Apple store or retailer and play with it for a bit - I would expect you to be pleasantly surprised, even shocked, at how well it behaves. If you can't get access to one, watch these Discussions and read what actual owners and users begin to report, not what 'experts' are thinking.

Can't Migrate from G4 to Intel Mac Mini

Hi
I have been unable to migrate files from my old G4 destop to my new Intel Mac mini. I wonder if anyone could help.
I first tried first using the migration assistant on the Mac mini and used the G4 as a fire wire drive. Failed twice, the process froze both times.
Erased Intel Mac mini and tried to do a restore from G4 using Disk Utilty. Failed twice. Didn't complete process.
I then tried the same twice using Supe Duper. Completed process (took hours) but in both cases couldn't boot Mac mini. Get the folder icon on boot indicating can't find system (I think).
I though I would then clean re-install system files from restore disks that came with MIni mac and start a fresh, but won't allow me to do this !! Spent two days and no further forward.
Any suggestions ?
Would erasing Mac mini and and trying Carbon Copy Cloner work ?
Can I add files manually from G4 to mac mini ?
Thanks in advance.
G4 ibook. G4 desktop, mac mini (intel) Mac OS X (10.4.7)

Exactly which model G4 tower do you have? The
PCI-graphics G4 towers do not support FireWire Target
Disk Mode.
If FWTDM works, have you replaced the hard drive that
came with the G4? Technically, Apple claims FWTDM
will only work with the OEM (original) hard drive
that came with the G4 tower. If you've replaced it or
added a second drive, it might not work correctly in
"target" mode.
If you do have a new hard drive, you should be able
to put it into a FireWire (or USB) external hard
drive case and use the Migration/Setup Assistant to
copy your files over.
If you're still having trouble, you can copy your
files over manually. Do you know which files you're
interested in copying? If your G4 tower works in
"target" mode, but the Migration/Setup Assistant is
having trouble, you can usually just drag all the
files and folders from your user's old home folder to
the new folders on the new computer. (Macintosh
HD/Users/YourUserName/Pictures > NewMacintosh
HD/Users/YourUserName/Pictures)
-Doug
Yes I did change the hard drive to a bigger one so that may be the problem.
When I use the Traget mode I do see my "old" drive (both partitions) on my desktop so it suggests firewire is working.
Won't take everything across including applications, library etc.
Will let you know how I get on.
Thank you for your time. Geatly appreciated.

G4 power brick with Intel mac mini? is this possible just to test?

A friend gave me an Intel mac mini, 1.60GHz CPU model, but no power supply.
I tried using my G4 mac mini's 85W A1105 power supply on the intel mac mini but nothing happens. I have to unplug the power supply from the wall to get it to power on my G4 mac mini (it apparently doesn't like being plugged into the intel mac mini).
Is it possible to use the G4 2005 power supply with the Intel mac mini if only to just test to see if the intel computer works? I don't want to buy a MA407LL/A 110W intel mac mini power supply only to find that the computer he gave me is broken.
Just wondering if anyone had any tips/ideas how to tell if the Intel mac mini works at all or if I'm just going to have to find someone who has the 110W intel model supply to test it...

The G4 mini power supply is rated at a significantly lower current capacity than the Intel mini requires, thus while some have had marginal success in using an old supply with a newer system, almost any tolerance variation will mean the Intel box won't run with the G4 supply. Not only that, but since the Intel system will load the G4 supply at a level it was not designed to accommodate, you could damage your G4 supply by trying.
If you have an Apple store in your area, I would take the Intel mini to the genius bar there where it can be tested, thus avoiding you having to buy a new supply without knowing if it will work.

Blank screen, Intel Mac mini, Samsung P23700 LCD monitor; HELP!?!

I just got a new 23" Samsung LCD monitor and hooked it up to an Intel Mac mini. Turning on the system results in a blank screen with the monitor simply displaying a dialog box that seems to show that it is trying to figure out if the incoming signal is digital or analog. This dialog box is on for a few seconds and then the monitor goes to sleep. The monitor realizes that there is a signal coming in; As soon as I disconnect the DVI cable I get the standard "Check Signal Cable" on the monitor's screen. I don't even get the initial white screen on the Mac boot up. nothing. just the monitor's confused signal identifying dialog.
I've tried connecting the Mac mini to the monitor with a DVI to DVI cable and a DVI to VGA to DVI connection, with the same result.
I've also tried the monitor with an older PowerPC based Mac mini with the same result.
Both Macmini's work with out a problem when connected to my 32" LCD TV with a DVI to HDMI cable.
I also tried the Samsung monitor with a little Windows XP running laptop using the VGA to DVI cable and the monitor worked like a charm; I think that fact has been the most painful part of the process up to now.
The windows machine's screen set up that worked was 1280x800 at 40Hz. I can't get a resolution like that on the Mac's display settings. I've only been able to hook it up to the LCD TV, and the display settings when hooked up to the TV are limited to LCD TV settings; i.e. 1080i. I've also tried setting the mac mini to 800x600 but still get no picture.
Resetting PRAM etc. didn't help either.
I'm stuck... any ideas people?

I've tried connecting the Mac mini to the monitor with a DVI to DVI cable...
That should work.
and a DVI to VGA to DVI connection...
That won't work. Once you go from DVI to VGA from the mini, you need to stay VGA. There is no going back to digital. So try DVI to VGA and then a VGA cable to the Samsung.
I also tried the Samsung monitor with a little Windows XP running laptop using the VGA to DVI cable and the monitor worked like a charm;...The windows machine's screen set up that worked was 1280x800 at 40Hz.
I wouldn't call that working like a charm. 1280 x 800 at 40Hz is a completely bizarre resolution for a 23" monitor, or any monitor. I would begin wondering if you got a bad monitor if that's the best it can do.

Intel Mac Mini won't Shutdown or Restart

Similar Messages

Maybe you are looking for