Intel Mac OS X can't connect using 802.1x with TTLS authentication

To login at the wireless network on my school I use the following settings:
802.1x connection with TTLS authentication and TTLS inner authentication set to PAP.
My MacBook Pro logs in, but has a self assigned ip-address and I can't use the network.
On my old iBook and my friend's Powerbook with exact the same settings it works perfect. (and gets an assigned ip-address throug DHCP.
Bug in the Intel version of Mac OS X I guess?

Regarding the post about other intel macs being unaffected, I don't have an imac so I don't know for sure, but the connectivity problems seem to be more widely reported for the macbooks. It's certainly possible they are affected as well, but I was under the impression they were using a different chipset and/or firmware. (note to self, check on that).
What I cant understand is why they have changed the
airport express card for the intel macs, albeit the
processor has changed but that shouldn't affect the
card as that should be processor
The intel macs were largely designed by intel. I suspect that apple provided case dimensions and a specifications list which intel then used for the designs. The wireless cards in the powerbooks were based (iirc) on a pc-card bus. The older airports were based on PCMCIA-16.
In the macbooks, it appears to be a mini-PCI-express. (I had to send my back for noise issues. ASP might tell you what bus it connects to). The benefit to this is better speed and the possibility of future expansion. Dell uses the same connector.
Some side-benefits of having the board designed by intel (or with heavy intel involvement) is that we can already dual-boot windows XP. Wireless seems to work fine if you run windows on the macbook. Therefore, I think this is a driver issue likely to be resolved sooner rather than later.

Similar Messages

  • Mac Lion can't connect to Cisco VPN with RSA authentication

    Hello,
    We have a problem with a manager who has upgrades his Mac to the latest Lion OS (64 bit), before uograding he could connect without any problem with his mac to our network and work on the terminal server. Since the upgrade he's not able to get it working in 64 bit (normal) mode.
    This our setup
    Cisco  PIX 515
    RSA Cisco Pix security Apliance.
    Does anybody have any advice to get this setup working.
    regards

    Hi Raymond,
    We have encounter the same issue with one of our sales director, the upgrade to MAC OS-X Lion breaks the VPN IPsec connexion. We have tryed various type of tunning with no sucess.
    Finally, as wordaround, we have installed the AnyConnect client and it works fine now.
    Vincent

  • [WLAN] Use 802.1x with PEAP without Certificates?

    Hello there,
    is it possible to use 802.1x with PEAP authentication via MS-CHAPv2 without cheking for the servers certificate? I can't find an option to disable it

    On whitch device? You can set the autorithy certifacte to none or choose one from the list.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Can't connect to Netgear router with WPA enabled (MBP)

    I just received a Macbook pro today, everything is wonderful except wireless networking. When it first started up, it detected my wireless network, showed me the SSID, and asked for a password. I entered the password, and it failed to connect. I decided to try later and did the rest of the install.
    I connected via cabled ethernet and downloaded all of the updates. For a machine that shipped from the Apple store (custom config) a few days ago, I was surprised at having 13 LARGE updates to download. Grabbed them all, including a Firmware update which required two reboots. One for everything else, and another for the firmware.
    I tried again from sysprefs, and asked for the diagnostics. It asks me for my WEP key, and there is no option for WPA. I tried entered the WPA key anyway, despite only three WEP options showing up, and it still fails.
    Going through the Airport 'tab' and editing the connection, I get an option for WPA Personal, Enterprise, WPA 2 Personal, and WPA2 Enterprise as well.
    I tried using WPA Personal and WPA 2 Personal and entering the key which works on other notebooks, still no joy.

    Which Netgear router do you have? I use the Netgear
    RangeMax WPN824 and works well with WPA enabled but I
    think it may have failed to work the first time.
    WGT624 v2. Works fine with other wireless devices from a number of vendors, and is detected by the Mac, but I can't connect. I don't want to disable WPA if I can help it, I have a number of other systems configured for it as is, plus guests that come to visit.
    but some how I had to delete the connection,
    let airport find it again and re-enter the password
    to get it to work. One of those things I kind of did
    in the process of troubleshooting and can't remember
    exactly how it was I did it
    I'll try that and see if it helps. Thanks for following up.
    UPDATE: Sure enough, I deleted the network and added it back in by manually specifying the SSID and password, and it works now. No idea why, but there it is... thank you very much.

  • TS3367 If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

    If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • How can I connect my iTunes account with PayPal?

    How can I connect my iTunes account with PayPal?
    In the payment method page (I access it by iTunes for Mac) there's no PayPal button!
    PS: I live in Italy

    What do you mean by sync your iTunes account?

  • Why can't I use WebCT chat with my computer?  I get the 'spiral of death' every time I try to type in my chat.  I have a feeling it has to do with compatibility issues between Java and Tiger.

    Why can't I use WebCT chat with my computer?  I get the 'spiral of death' every time I try to type in my chat.  I have a feeling it has to do with compatibility issues between Java and Tiger.

    Hi Elizabeth,
    Do your Mac meet any of these requirements?
    http://www.wvnet.edu/services/webct/requirements.html
    From this it appears to be PC only!???
    http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
    Can you provide any more info on which bersion or file you have?
    Can you tell us why you need this for your use?

  • Can I connect the iphone 3gs with ipad 2?

    Hallo
    can I connect the iphone 3gs with ipad 2?

    You can connect it to use the iPhone as a personal hotspot for the iPad, or to transfer photos/videos via the camera connection kit. You can't connect them in order to transfer music, documents etc.

  • Can i connect my time capsule with my router as a bridge ?

    can i connect my time capsule with my router as a bridge ?

    I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
    The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
    Do you mean wireless bridge??
    If you mean wireless bridge the answer is maybe but unlikely.
    If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
    So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
    If you want specifics ask specific questions.

  • Can I connect a SCXI 1000 with PCI 6025 ?

    Can I connect a SCXI 1000 with PCI 6025 and use Virtual Banch with PCI 6025 ?

    Bley,
    Yes, you can use your PCI-6025E and SCXI-1000 with Virtual Bench. Do you have a more specific concern? Have you tried this setup, and it is not working?
    Spencer S.

  • How can i connect my iphone 4 with my ipad retina by bluetooth???

    how can i connect my iphone 4 with my ipad retina by bluetooth???

    iOS: Understanding Personal Hotspot
    http://support.apple.com/kb/HT4517
    Use Bluetooth to tether your iPhone, iPod touch, or iPad
    http://www.macworld.com/article/1159258/bluetooth_tethering.html
    How to Connect an iPad to an iPhone Via Bluetooth Tethering
    http://techtips.salon.com/connect-ipad-iphone-via-bluetooth-tethering-25472.html
    Tethering an iPad to an Android Cell Phone
    http://everydaylife.globalpost.com/tethering-ipad-android-cell-phone-33675.html
    How to Reconnect a Forgotten Bluetooth Device on an iPad
    http://techchannel.radioshack.com/reconnect-forgotten-bluetooth-device-ipad-1037 .html
     Cheers, Tom

  • Can't connect to any webpages with any browser

    Our Powerbook G4 can not connect to any webpages with any browser (safari, firefox, IE) but other TCP/IP applications work fine. IE, the AOL application can connect via TCP/IP, iChat and skype both work fine.
    Any idea?
    Thanks,
    Alan

    It sounds to me like either a DNS server issue, or your Mac is looking for a web proxy and not finding it.
    If you don't have the DNS server filled out in your network settings, find out the DNS IP info from an ISP and try inputting it.
    Also, click on the Proxies tab in Network Settings to see if you have a proxy configuration listed (either automatic config or manually inputted proxies per port). If you do, disable the proxies and try again. If not, see if you can get the web proxy info for where you are from either your ISP or your work place.

  • Can facetime be used to communicate  with iChat?

    Can facetime be used to communicate with ichat or any similar (VOIP) application on a MAC?

    No. But Apple just release the Beta of FaceTime for the Mac. It requires Snow Leopard. I tried it and it works fine.

  • I have an old IPOD Touch and just bought a new Nano.  If I download the latest version of Itunes for my Nano, will I lose all of my songs stored in my old version of Itunes and can I still use my Touch with the new version?

    I have an old IPID touch and just bought a anew Nano.  If I downoload the latest version of Itunes for my Nano, will I lose all of my osns stored in my old version of Itunes and can I still use my Touch (with my current songs on it) with the new version of Itunes?  In the past when I downloaded a new version, I lost my songs on my Touch.  Thank you for any help any one might offer.

    i am no shure but go on Itunes store in shortcuts and try to find 'purchasse'
    good luck

  • Can't I use my Scanner with the Elements 10 editor without the organizer??

    I have been using Photoshop Elements for a looong time to help me create the product images I need for my online business. It's been a love-love relationship... until I took advantage of a special offer and bought Elements 10. Now it seems the only way I can scan images is thru the Organizer.... and the organizer is something I don't need.
    Is there a way to scan my images thru the Editor only... and completely bypass the organizer (as I'm able to do with my older version of Elements)? Like a twain plugin I can install or something?
    I may scan 10 images and decide to use only 3 of them... and those are the only ones I save.
    With the way PSE10 is set up using the Organizer to scan, it's saving all 10 of them. Not to mention the extra steps of scanning thru the Organizer... (which means that pop-up window for my scanner every time), back over to the editor to pull the images in for editing, back to my files to delete the ones the organizer saved that I don't want... etc etc etc.
    It's like 5-6 extra steps altogether and a huge time-sink for me (you know the old saying... time is money).
    If there's no way to bypass the Organizer for scanning.... can I get a refund on my purchase? My older version of Elements works beautifully for me...  I was just hoping for  more sophisticated image editing capabilities.
    VERY frustrated right now.

    Thank you very much for your explanation which I fully understand.  Since a "fix", as you say, is not a solution might it not be a good idea to alert purchasers of the latest editions of Elements that they have an option to try this alteration to the installation in order to be able to import images from a scanner?  (My own experience with versions prior to 9 always worked perfectly!)  I do not know but does Photoshop CS5 allow the user to import images from a scanner or does the user have to use a similar solution to what applies to Photoshop Elements?  I find Elements to be a very good app and am sure it is a good selling product for Adobe for amateur/semi-pro users that the alternative that I suggest may be a useful tool for existing or new users who want or need the capability to import from a scanner rather than having to go through other more difficulty and time consuming ways of doing the same task.  Kindest regards and with my best intentions.
    Fergus Cooper
    Date: Tue, 20 Dec 2011 12:50:51 -0700
    From: [email protected]
    To: [email protected]
    Subject: Can't I use my Scanner with the Elements 10 editor without the organizer??
        Re: Can't I use my Scanner with the Elements 10 editor without the organizer??
        created by Barbara B. in Photoshop Elements - View the full discussion
    It's not a "fix", exactly. The TWAIN plug-in causes a lot of crashing in PSE so in the past couple of versions adobe makes you install it if you want it.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4096095#4096095
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4096095#4096095. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for

  • URGENT:problem with memory using swing component

    We use Java SDK 1.4.0-b92 on a Sun Blade Machine with Solaris 8 Operating System. We developed a software with a GUI (JFame, JInternalFrame) which have to be refreshed in precise moments and any time we do it there is a big loss of memory(not the Jav

  • Moving objects through all keyframes

    hello all, i want to make chages in my website and i have a problem: im trying to move objects, but i dont want to have to do the change in all my keyframes... how do i make position changes that effect all of the keyframes? with thanks, joel www.joe

  • Getting errors while opening SAP MMC for NWCE

    Hi Frndz .. I installed NWCE 7.1 trail version it was installed well, but when am trying to start the server thru rightcklick start all services on SAPSID(CE1), itz giving follwoing errors.. Start failed :2 *NIEHOSTUNKNOWN*_ *NRawConnect failed in pl

  • Error while migration in R12

    Hi All, I tried migrating the profile options from one r12 instance to the other and the concurrent program ended in error with the following message. Cannot continue processing APIs as there are some errors. java.lang.Exception: Cannot continue proc

  • No audio on windows xp on macbook pro.

    I recently ran boot camp and installed windows xp onto my macbook pro. I also installed the drivers from the mac osx disc but i still get no audio from my internal speakers or headphones. What do i need to do in order to get audio?