Intel MacBook Cannot Sleep?

My Macbook won't go to sleep. When I click on sleep nothing happens. Any ideas??
Thanks.

What does \on starting’ mean? When you start/restart mac, you must hear an initial chime, if immediately after that chime you press option/alt key and wait for 3-4 seconds, can you see the boot options on screen? You must at least see the Lion boot and Recovery boot partition; more if a boot disk in the optical drive and/or a boot system on a flash drive.
If your keyboard works on startup, then things may be simple.

Similar Messages

Cannot install Leopard on Intel Macbook

I have an Intel Macbook (2GHz, 2GB RAM, 160GB HD) with OS 10.4.11 installed, and am trying to upgrade to 10.5 with a retail version of Leopard. However, when I attempt to boot from the install disc (which I can successfully do), I cannot install Leopard because of an error message that it "cannot be installed on this machine."
Any help/advice?

pixelinpink wrote:
I have an Intel Macbook (2GHz, 2GB RAM, 160GB HD) with OS 10.4.11 installed, and am trying to upgrade to 10.5 with a retail version of Leopard. However, when I attempt to boot from the install disc (which I can successfully do), I cannot install Leopard because of an error message that it "cannot be installed on this machine."
Any help/advice?
Check out this article:
http://support.apple.com/kb/TS1940?viewlocale=en_US
Is the Leopard DVD a complete retail version (not an update)?
Is your MBP a very recent one? If you you need a very recent version of the install DVD.
Is your HD formatted/partitioned properly for Leopard (GUID, HFS+)?
You may need to backup your Tiger install (SuperDuper or CCC clone is perfect) and then do an erase and install of Leopard on a blank HD. You can always boot into Tiger (as I do) from the backup, and you can migrate from the Tiger BU to Leopard.

I use MacbookPro late 2011 with Maverick, when i put iPhone 5 or another cellphone askew on left corner of touch pad and slide it to keyboard, the macbook will sleep, i don't know what the problem is, it occur on another macbook pro late 2011

I use MacbookPro late 2011 with Maverick, when i put iPhone 5 or another cellphone askew on left corner of touch pad and slide it to keyboard, the macbook will sleep, i don't know what the problem is, it occur on another macbook pro late 2011

It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
Was there an update maybe ?

I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?

I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Problems viewing HDV .mov file with Intel MacBook

I have a HD QuickTime file exported from FCP HD on G5 PowerPC. I cannot play this file on my intel macbook, I get a white screen.
Any idea why?
Thanks
Brian

You'll need to copy the Apple HDV Codec to your MacBook. Since it won't be Intel native (unless you get FCP 5.1) you'll have to force QuickTime Player to run in Rosetta; it should be a setting in the Get Info window for QT Player. You should then be able to view the video (though I haven't tested this myself).
Hope this helps.

MPEG2 component will not install on Intel Macbook Pro

I have just purchased the MPEG2 component and am trying to install on an Intel Macbook Pro.
My Quicktime Version is 7.1.3 (Pro)
When I run the installer in the folder for Quicktime 6.4 and later & Intel Macs.
I get "Quicktime MPEG2 cannot be installed on this computer"
Any ideas?
Cheers,
Mim
Macbook Pro 2.33 Ghz Intel Core 2 Duo Mac OS X (10.4.6)

Unfortunately that did not help.
Here is the installer log.
Jan 10 18:54:39 Sean-MacBook-Pro : Opened from: /Users/Sean/Desktop/QuickTimeMPEG2.pkg
Jan 10 18:54:39 Sean-MacBook-Pro : It took 0.259875 seconds to finish launching.
Jan 10 18:54:40 Sean-MacBook-Pro : Distribution: QuickTime MPEG2
Jan 10 18:54:42 Sean-MacBook-Pro : Installation checks failed.
Jan 10 18:54:42 Sean-MacBook-Pro : Installation check failure. QuickTime MPEG2 cannot be installed on this computer.. This software cannot be installed on this computer..
Jan 10 18:55:23 Sean-MacBook-Pro : @(#)PROGRAM:Install PROJECT:Install-141 DEVELOPER:root BUILT:Aug 19 2006 19:29:45\n
MacBook Pro Mac OS X (10.4.8)

Reinstall of OS 10.5 on an early intel Macbook pro

I've recently purchased from a university an older intel macbook pro that has been completely wiped. In order to do anything I need to install OS 10.5,but cannot find it anywhere. The computer asks if I'd lioke to reinstall lion but I cannot until I install leopard. Where can I get it?

I wanted to end up with Lion 10.7.5 which apparently is the newest OS that this computer could handle. I would have had to load leopard, then snow leopard, then lion, according to the messages that I was getting. Anyway, I brought the unit in to my local repair joint and found that lion was still on the hard drive though the university had wiped the memory. So I had him dial it in. First time that I couldn't figure things out and needed help, but hey I'm a plant nerd not a computer nerd.
Thanks, Bob

Why did F4 beta uninstall itself after I put MacBook to sleep and had to be rebooted from the disc image?

I put my MacBook to sleep with Firefox 4 beta open and when I went to use it again it had vanished. My spotlight search yielded v. 3.6 and the v.4 beta installation file (.dmg). I opened v. 3.6 and declined to transfer v4 Add-ons . All tabs that were opened on v.4 beta opened on v. 3.6. I closed 3.6 and reinstalled v.4 beta from the disc image. I was warned to replace previous version (3.6) - which I did. V4 beta installed intact (bookmarks, add-ons, history etc.) but I lost my open tabs. My only concern is that I was required to replace v. 3.6 and don't want to risk losing bookmarks and history if v. 4 proves unstable. I am otherwise pleased with the new look and performance.

Yes, your iPhone has the classic signs of early onset Alzheimer's...
Assuming that nothing is pressing on the Home button when this occurs, try the basic steps as needed:
1. Reset phone - press both home and sleep/wake buttons until the Apple logo appears.
2. Restore phone in iTunes using a backup
3. Restore in iTunes as new, without using a backup.
If #3 doesn't help, there is a hardware problem such as a defective home button, and you should make an appt. with an Apple Store Genius bar.

Macbook to TV, Works fine until I put the Macbook to sleep then tv display

Macbook to TV, Works fine until I put the Macbook to sleep,
I wake the Macbook with external keyboard and the display shows up on TV just fine for a second or two then it looks like something changes and then it starts rolling.
It does not do this when Macbook is awake it only does it after it's put to sleep.

Probably the resolution is switching from a mirrored resolution to some other resolution that the TV can't work from. Try this; shut down the MacBook. Cable up the TV to the MB and also the external keyboard and mouse. Hold down the Shift key on the external keyboard, hit the start button on the MacBook and immediately close the lid on the MB after you've hit the start button. Continue holding the Shift key down on the external keyboard until you see the grey screen with the spinning gear at which time you can release the Shift key. The MB should now finish starting up in Safe mode with only the external screen being on. Hopefully the screen will not be rolling.
Once the MB finishes booting, go into System Preferences/Displays and set the resolution to the optimal/desired resolution for your TV. Hopefully this choice will stick through subsequent restarts and also correct the issue of the rolling screen under the conditions in the scenario you described.

Unable to load Flash 9 on my Intel MacBook Pro

Unable to load Flash 9 on my Intel MacBook Pro but can on my
Intel iMac. I spoke with a Tech from the Mac Store service area and
was told that there in a thread on this issue but I can't find it.
The basic issue is that I am able to load Adobe Flash Player
9 on my Intel iMac but not on my Intel MacBook Pro and I'm unable
to determain why. I tryed uninstalling and reinstalling three times
and found no difference.
If someone could help me I'd be thankful.
Dave

I bought the $29 version of Snow Leopard (not the kosher way of doing things, i know.
If you read the license agreement, there's actually no difference between what's allowed with the $29 copy and the $169 boxed set. The only difference is that the boxed set also includes iLife and iWork. There is also, despite what some will have you believe, nothing in the license agreement that requires Leopard to be pre-installed except in the case of the $10 disk purchased as part of the Up-to-Date program (for folks who bought a machine shortly before SL was released). So, you're not being bitten by some technical requirement for Leopard to be present.
I get a flashing folder with a question mark. My disk drive makes some crazy noises as well, and it seems to start running fast, then slowing down. I think it may have caused a minor scratch on the disk as well.
Sounds like it's possible the drive could be failing, though that's impossible to say for sure remotely. One man's crazy noises are another man's normal state of operations. Do other DVDs work in your drive?
I'll also need to do an "Archive & Install" since there are tons of important files on this machine.
*DO NOT* attempt to install a system update on this machine unless you have good backups! If something goes wrong, you're screwed if you didn't have a backup. Hopefully, you have not reached that point already... I'm unclear on whether your machine is no longer able to boot, or if it's only having trouble when you try to boot from the SL disk.
If your machine is still functional, your first priority before doing *+anything else+* should be to make at least two backups. See my [Mac Backup Guide|http://www.reedcorner.net/thomas/guides/backups> for assistance with this.
If your machine can't boot anymore, let us know and we'll offer some troubleshooting tips. And don't try to do anything else with it until you've consulted with some expert, whether here or at an Apple Store or somewhere else.

After updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

Download 9.1 and 9.2.3 updates and install them

I formatted my ext hard drive and changed it to mac os x extended(journaled). then i put in all my data back. after a while, i insert the hard drive but my macbook cannot read it. plz help

i formatted my ext hard drive and changed it to mac os x extended(journaled). then i put in all my data back. after a while, i insert the hard drive but my macbook cannot read it. plz help

SanandaDutta
tried on a different mac. The same problem exists.
If that is the case, its extremely unlikely you have a bad USB cable on the seagate, rather as I mentioned earlier a bad SATA bridge card.
If the Seagate 1TB USB external wont open on either Mac and youve verified same (try a diff. USB cable if you have one however this is nearly never the case),....then to get the data off that HD (unless it is dead which is also extremely unlikely),......then you would need to extract the HD from its case and insert same into either a HD dock or USB HD enclosure.
8 out of 10 seemingly dead inopperable 1-3+ year old external HD are perfectly fine, rather the cheap 50 cent SATA bridge card fries and dies (alas)
reply back if you need help in extracting same.

Problems connecting to Monitor after waking up MacBook from sleep

Hi,
I am experiencing a lot of problems connecting my macbook pro to external monitor once I put it to sleep. I have tried every options like setting up PRAM and all, but it just wont work. Sometimes the restart works and sometimes it wont. I am using a Samsung monitor. I have no idea what to do, as I keep on clicking Detect displays and it just wont do anything. Can anybody please help me as to how I can wake up my macbook from sleep and get it connected to the monitor. I have a mac keyboard and bluetooth mouse, but neither would wake the mac. I have change my bluetooth settings so that the mouse should be able to wake it up..

William Rivas wrote:
William Rivas wrote:
William Rivas wrote:
Linc Davis wrote:
Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. Repair permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reset the System Management Controller.
9. Reset the PRAM.
10. Reinstall OS X.
Updating to 10.9.2 did the trick. So I thought. Does anyone have a solution?
Thanks!

Final Cut express upgrade for intel macbook pro

I need help i used to have a G5 desktop and got DVD Studio Pro 3 and then i got Final Cut pro 4 with Upgrade, i try to install this software to the intel Macbook Pro wich i have 2 gig of memory, but if I install DVD Studio Pro 3 and Final Cut pro 4 it will run too slow and there is also the error pf agp graphic card missing i know that if you hit esc will run but it is to slow my hp 2.0ghz is faster i need help on which is the best upgrade for the intel mac so i don't have to purchase the software again i saw on www.apple.com/universal/crossgrade there are some option i call apple and they told me to buy the Final Cut Pro 4 or HD (4.5)for $199.00 but i want to make sure this is what i need to do! help

Yes you need to crossgrade to 5.1
The offer only lasts until the end of December and after that it'll probably go back up to $699.
Also I wanted to point out that you're in the Final Cut Express forum asking about Final Cut Pro. Not a huge deal but in the future you might get better results asking Final Cut Pro related questions in the Final Cut Pro forum.
i know that if you hit esc will run but it is to slow my hp 2.0ghz is faster
Your HP runs Final Cut Pro and DVD Studio Pro faster?!? Huh...Bwa?!?
By this I assume you mean your HP runs comparative programs faster (Avid)

My macbook is sleeping all the time!

About 2 weeks ago, my macbook instantly sleeped. From that day to now, my macbook could just not awake! do anyone knows how to fix it? or i have to buy another mac?
Thanks, your answer is completely appreciated.

Also, try a SMC reset.
DALE

Intel MacBook Cannot Sleep?

Similar Messages

Maybe you are looking for