Intel or not intel?  Advice wanted.

I need some advice here...
I've decided to buy a dual g5 imac, but now I can't decide to go with the intel or not...I'll be primarily using the maching for dvd authoring, editing and motion graphics...so I already have final cut studio, combustion, after effects, photoshop etc.,...according to Apple Support, the Adobe programs will run but not in the true intel environment, and then there's some 50 dollar upgrade fee to get FCP studio to work on the intel imac...is the intel really worth it? I can't decide whether to get an intel or not...I don't really want to lay down tons of cash for new software...what should I do? Thanks.

Moving up from a G4 you're going to see a big improvement in either case but there are a lot of reasons to go with the Core Duo, the first being performance: I had a 2.0Ghz G5 iMac and can tell you the Intel box is far speedier. There are a lot of improvements: memory & bus speeds, graphics chip, not just the dual CPUs. As applications are better optimized for the duo core performance will get better & better.
The second big reason is support. While Apple promises to support the PPC architecture far into the future you can be sure not a dime of new R & D is going into that platform, either at Apple or elsewhere like Adobe: it is the past, and Intel is the future.
Third, and this may mean nothing to you, eventually someone will figure out how to dual boot Windows on these InteliMacs and your software choices will expand exponentially. I bet there will be tri-boot possibilities as well, with Windows, OS X, and Linux available on call from a start-up menu, within a year.
Last, the G5 iMacs are already discontinued and if you are to find one new you'll be buying the very last stock of a dying breed... not what I'd want to invest in, personally.

Similar Messages

  • Intel or not intel???

    Hi all!
    My G4 iMac is giving up the ghost and I am thinking about getting a new iMac. But I have heard that many of the programmes I use (mainly Adobe) don't support the intel chip so I would have to use rosetta and this can be slow.
    Is it worth up-grading or just getting an old G5 for the moment??
    Thanks for any help.

    I wouldn't get a G-5. Depending on the age of your G-4 the Adobe applications you use may actually run faster under rosetta than on your old G-4. The Intel chips are the future and the applications will be updated soon enouogh. Why lock yourself in to a dying technology?
    Bottom line is that it is your money. If the G-5 was really cheap, then maybe. IMHO if it is more than 25% of the cost of an Intel model I, personally, would not do it. Of course, you also have to factor in the cost of the new Adobe apps when they come out. You might want to check if there will be an upgrade price or if you will have to spend full price. That cost has to be included in your decision.
    Tough decision, but if it were me I would go with an new Intel model.

  • To Intel or not Intel? That is the question.

    Greetings.
    My G4 dual 450 is getting long in the tooth. I've been using 10.3.9 with no problems; however, it may be time to upgrade to Tiger.
    As I don't want to spend money on new software, and I'm pretty happy with what I'm using (primarily Office 2004), I'm thinking of buying a used iMac without the Windows capability, rather than going for a new dual core 2, or whatever they're packing. I know it'd save me a substantial amount, considering my needs.
    Aside from warranty issues, is there a downside to this strategy? Will Leopard run on a non-Intel machine?
    thanx

    Hi Jerry Kaiser;
    You will be going from a very old box to an old box. Personally if I were doing that upgrade I would go with an Intel box instead of the older PowerPC box.
    The Intel can execute PowerPC binaries with Rosetta. This will give you a performance hit but the Intel box should be so much faster then your old G4 that you will see an overall increase in performance going with it.
    By going with the Intel it will last longer and you can gradually upgrade the software over time to get back the lost performance with Rosetta.
    As far as Leopard and non-Intel machines go that is speculation and no one knows for sure. Having said that if Leopard were to cut off all non-Intel machines, it would not have much of a market because most of the Macs out there are non-Intel so I seriously doubt that Apple would do that.
    Allan.

  • HT3964 imac intel monitor not working

    imac intel monitor not working

    Hi Robby62,
    please do report back.
    Also, after you have successfully installed the BootCamp Drivers from the Leopard DVD (which are version 2.0, btw.) you might want to download the 2.1 version update here: http://www.apple.com/downloads/macosx/apple/application_updates/bootcampupdate21 forwindowsvista32.html
    The update also has to be installed while in Windows.
    Have Fun
    Stefan

  • I have an iMAC G5 PowerPC (not Intel) running10.5.8.  I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so.   Yet I can't install Snow Leopard as the G5 is not Intel.   What do I do?  How do I move music

    I have an iMAC G5 PowerPC (not Intel) running10.5.8.  I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so for my new iPhone 5S.     Yet I can't install Snow Leopard as the G5 is not Intel.   What do I do?  How do I move music and pics?  And keep them synced up as I purchase more? 

    Sorry, but that is correct. You need Snow Leopard to sync your phone and the latest version of iTunes and you old G5 cannot run that.

  • Can video chat with Imac non-intel but not with Powerbooks

    Hi,
    I have a Linksys WRT54G firmware v. 1.0.6 connected to a Comcast Cable modem. My IMac Intel Duo (OS 10.4.6) is connected via ethernet cable to the router. I am set to DHCP on router and IMac. My Quicktime settings is at 1.5mb, I have tried with firewall off and on with the appropriate ports open. I have tried upnp on and off.
    I can connect to other Imacs (non-intel) but not to powerbook G4's. With the Powerbooks I can text chat, but sometimes they can see my text, but I can't see theirs. And every video chat is a fail to respond with the powerbook, but they can connect with others.
    Is there anything else I can do?
    Please help. Thanks.

    Hi cmbell,
    Do you know how to access your modem ?
    This should give you somewhere to turn off DHCP.
    Then you go to System Preferences > Network and select the connection method you are using.
    Then select the TCP/IP tab.
    In the drop down that says Using DHCP change it to Manually. (or Manual with DHCP if doing James' way)
    Type the IP you wish to use in the next entry field.
    Copy the subnet mask form the Using DHCP
    Copy any DNS servers listed.
    Copy the router IP address which will be the modem or router in question.
    Hit Apply.
    Done.
    9:23 PM Sunday; May 7, 2006
    Message was edited by: Ralph Johns (UK)

  • Cloning Old iMac G4 HD to new (not Intel) G5 iMac HD????

    I have a 3yr old white round-base, flat panel iMac and need to replicate my 60gb hard drive to a new 160gb G5 (not Intel version) iMac flat panel hard drive??? I plan to connect the 2 via a Firewire cable, then transfer the hard drive contents..any recommendations on how I should do this? Any input would be appreciated...Thanks!

    Hi,Several different options including:
    Target mode. Switch off the iMac G4. Connect the two machines via FW. Boot the iMac G4 holding down 'T'. You'll then enter 'Firewire Target Mode'. On the iMac G5 the iMac G4's hard disk will appear underneath Macintosh HD (but will be coloured orange) - I'd rename them to something other than Macintosh HD to avoid confusion. You can then drag and drop at your will. Just drag the orange icon to the trash when you're finished and hold in the iMac's power button to switch it off.
    Use Tiger's Migration Assistant that automates and guides you through the above. MA will copy about 99% of your settings/documents/applications, icon positions, desktop picture, dock items etc. But most users notice a few errors/items not working properly - hence why I say 99%. MA can be found in Macintosh HD > Applications > Utilities > Migration Assistant.
    HTH
    mrtotes

  • Someone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

    omeone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

    It is retail disk, i bought it in apple store. I also resetter PRRAM and SMC and checked disk. I also tried clean installation and upgrade, nothing works, after run installation program after few seconds wrote: OS X Snow Leopard cannot be install on this machine :-(
    Thank you for your answer
    Majo

  • Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?

    Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?
    Have tried repeatedly and end up shutting down instead of "sleeping:.

    Hello, most usually it's some USB device causing that, but...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • How to get Snow Leopard for Mac 10.5.8 not Intel Based

    how to get snow leopard to not intel based Mac 10.5.8

    Is it a Mac Pro, or a Powermac?
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware and report this upto *but not including the Serial#*...
    Hardware Overview:
    Machine Name: Power Mac G5 Quad
    Machine Model: PowerMac11,2
    CPU Type: PowerPC G5 (1.1)
    Number Of CPUs: 4
    CPU Speed: 2.5 GHz
    L2 Cache (per CPU): 1 MB
    Memory: 10 GB
    Bus Speed: 1.25 GHz
    Boot ROM Version: 5.2.7f1

  • Imac intel will not come on

    My imac intel will not come on when you press the button

    Have a look at > Intel-based iMac: What to do if your computer won't turn on

  • Transfer iphoto library from not intel based computer to ICloud.

    how can i transfer pictures from iphoto on my powerbook G4 10.5.8 to icloud? it is not intel based computer. any easy way? thanks.

    Can't be done. See iCloud Requirements http://support.apple.com/kb/HT4759
     Cheers, Tom

  • I have OS X 10.8.5 trying to upgrade. Have downloaded latest OS X Maverick but to install I am prompted for the Admin Password. I don't believe one was ever set up. I have tried my Apple Id Password but not accepted, Advice appreciated.

    My system is Mac HD OX S 10.8.5. I want to upgrade 10.9.1 and have downloaded it. However, to install it I am prompted for the Admin Password. I don't believe one was ever set up. I have tried my Apple Id Password but not accepted, Advice appreciated?

    If you have 10.8.5 you don't have a PowerPC Mac (PPC).  PPC is for pre-2006 Macs.   Go to Apple menu -> About This Mac to make sure you have an Intel Mac and that you didn't flip the 5 and 8 in your operating system indication.  If you actually have 10.5.8 but you have Intel it gets a lot more complicated to install 10.9.
    10.5.8 is the maximum for PowerPC.
    10.6 can be upgraded on Intel with this tip:
    https://discussions.apple.com/docs/DOC-2455
    And it also help you get up to 10.6.6 or 10.6.8 as needed.
    https://discussions.apple.com/docs/DOC-6271
    will help someone with 10.5.8 determine if they are ready to jump to 10.7 or later.
    If you have 10.8.5, you must install 10.9.0 first (free from the Mac App Store) to get to 10.9.1.
    Backup your data:
    https://discussions.apple.com/docs/DOC-1992
    and check http://www.roaringapps.com/ and your printer, scanner, and peripheral  drivers are compatible with third party vendors before upgrading to 10.9.

  • HT204053 I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing, I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose!

    I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing (supported by MobileMe), I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose! The other thing they don't tell you is that Mountain Lion disables OfficeMac, and I am considering uninstalling it for that reason - do I get my money back?!

    You stated; "Mountain Lion disables OfficeMac"
    That is not true.
    Mountain Lion does not have Rosetta so it is not capable of executing PowerPC code. If you have MS Office 2004 that is coded in PowerPC code and will not run in Mountain Lion. What you need to do is upgrade to an Intel version of Office.
    Allan

  • My IPad 6.1.3 is not allowing me to upgrade to version 7.0.2 ( not that I want to after reading all the horror stories).  My memory is 23.3gb available and ap is 3.3gb and....twice I've deleted pics from album and they are still there !

    My IPad 6.1.3 is not allowing me to upgrade to 7.0.2 (not that I want to after the horror stories) but I would like your advice on what to do. It's not memory because I have 23.3gb available. Also, my delete button in photos does not appear to be working.  I've deleted several pics twice and lo and behold, still there. My question is should I even upgrade to 7.0.2, what happens if I do not ?  And how do I get that delete button to delete ?  When first purchased, worked fine. Now....problems. Also, don't like the idea of having to pay for their support such as one time support question for $19.99 ?  Really ? Don't they all make enough $$ off the users of their products ? Okay, that's me last question.  Hope you can help me !  Thank you !

    My IPad 6.1.3 is not allowing me to upgrade to 7.0.2 (not that I want to after the horror stories) but I would like your advice on what to do. It's not memory because I have 23.3gb available. Also, my delete button in photos does not appear to be working.  I've deleted several pics twice and lo and behold, still there. My question is should I even upgrade to 7.0.2, what happens if I do not ?  And how do I get that delete button to delete ?  When first purchased, worked fine. Now....problems. Also, don't like the idea of having to pay for their support such as one time support question for $19.99 ?  Really ? Don't they all make enough $$ off the users of their products ? Okay, that's me last question.  Hope you can help me !  Thank you !

Maybe you are looking for

  • I want to share files between my MacBook Pro and G5, I am using an AirPort

    I want to share files between my MacBook Pro and G5, I am using an AirPort Extreme Base Station. I can see the MacBook Pro on the G5 and vice versa, I have file sharing turned on both, as well as Screen Sharing. I currently am sharing using Target Di

  • Changing AppleID in iCloud on phone

    My AppleID in the settings>iCloud tab of my iphone4 is incorrect.  A box pops up to tell me that it is incorrect, and I can either edit or ignore. When I select 'edit' the account information pops up: AppleID, password, and description.  the problem

  • XMI & UML Sequence diagrams

    Hi everybody! Does anybody know where I can find some example or tutorial on how to write an XML file (following the XMI specification) representing an UML sequence diagram? I mean...I want to be able to write that XMI file in order to give it to a U

  • Missing small OSX window that shows progress of loading OSX when booting

    I recently reinstalled Leopard using Erase & Install... Now when I boot into Leopard...the grey windows appear with the chasing arrows.. the screens turn the Apple blue...this is when the small white OSX window should appear..the one using a progress

  • IMac G3 Rev.A refuses to boot from an OS 9 installation CD.

    My iMac has first got Mac OS 9.0 on it. Then I just swapped in a new HD and installed Jaguar. After that I realised that I need OS 9 to run in classic mode, so I put in my OS 9.0.4 CD and booted it holding down the C key. Doesn't work. Tried selectin