Intel or not intel???

Hi all!
My G4 iMac is giving up the ghost and I am thinking about getting a new iMac. But I have heard that many of the programmes I use (mainly Adobe) don't support the intel chip so I would have to use rosetta and this can be slow.
Is it worth up-grading or just getting an old G5 for the moment??
Thanks for any help.

I wouldn't get a G-5. Depending on the age of your G-4 the Adobe applications you use may actually run faster under rosetta than on your old G-4. The Intel chips are the future and the applications will be updated soon enouogh. Why lock yourself in to a dying technology?
Bottom line is that it is your money. If the G-5 was really cheap, then maybe. IMHO if it is more than 25% of the cost of an Intel model I, personally, would not do it. Of course, you also have to factor in the cost of the new Adobe apps when they come out. You might want to check if there will be an upgrade price or if you will have to spend full price. That cost has to be included in your decision.
Tough decision, but if it were me I would go with an new Intel model.

Similar Messages

Intel or not intel? Advice wanted.

I need some advice here...
I've decided to buy a dual g5 imac, but now I can't decide to go with the intel or not...I'll be primarily using the maching for dvd authoring, editing and motion graphics...so I already have final cut studio, combustion, after effects, photoshop etc.,...according to Apple Support, the Adobe programs will run but not in the true intel environment, and then there's some 50 dollar upgrade fee to get FCP studio to work on the intel imac...is the intel really worth it? I can't decide whether to get an intel or not...I don't really want to lay down tons of cash for new software...what should I do? Thanks.

Moving up from a G4 you're going to see a big improvement in either case but there are a lot of reasons to go with the Core Duo, the first being performance: I had a 2.0Ghz G5 iMac and can tell you the Intel box is far speedier. There are a lot of improvements: memory & bus speeds, graphics chip, not just the dual CPUs. As applications are better optimized for the duo core performance will get better & better.
The second big reason is support. While Apple promises to support the PPC architecture far into the future you can be sure not a dime of new R & D is going into that platform, either at Apple or elsewhere like Adobe: it is the past, and Intel is the future.
Third, and this may mean nothing to you, eventually someone will figure out how to dual boot Windows on these InteliMacs and your software choices will expand exponentially. I bet there will be tri-boot possibilities as well, with Windows, OS X, and Linux available on call from a start-up menu, within a year.
Last, the G5 iMacs are already discontinued and if you are to find one new you'll be buying the very last stock of a dying breed... not what I'd want to invest in, personally.

To Intel or not Intel? That is the question.

Greetings.
My G4 dual 450 is getting long in the tooth. I've been using 10.3.9 with no problems; however, it may be time to upgrade to Tiger.
As I don't want to spend money on new software, and I'm pretty happy with what I'm using (primarily Office 2004), I'm thinking of buying a used iMac without the Windows capability, rather than going for a new dual core 2, or whatever they're packing. I know it'd save me a substantial amount, considering my needs.
Aside from warranty issues, is there a downside to this strategy? Will Leopard run on a non-Intel machine?
thanx

Hi Jerry Kaiser;
You will be going from a very old box to an old box. Personally if I were doing that upgrade I would go with an Intel box instead of the older PowerPC box.
The Intel can execute PowerPC binaries with Rosetta. This will give you a performance hit but the Intel box should be so much faster then your old G4 that you will see an overall increase in performance going with it.
By going with the Intel it will last longer and you can gradually upgrade the software over time to get back the lost performance with Rosetta.
As far as Leopard and non-Intel machines go that is speculation and no one knows for sure. Having said that if Leopard were to cut off all non-Intel machines, it would not have much of a market because most of the Macs out there are non-Intel so I seriously doubt that Apple would do that.
Allan.

I have an iMAC G5 PowerPC (not Intel) running10.5.8. I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so. Yet I can't install Snow Leopard as the G5 is not Intel. What do I do? How do I move music

I have an iMAC G5 PowerPC (not Intel) running10.5.8. I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so for my new iPhone 5S. Yet I can't install Snow Leopard as the G5 is not Intel. What do I do? How do I move music and pics? And keep them synced up as I purchase more?

Sorry, but that is correct. You need Snow Leopard to sync your phone and the latest version of iTunes and you old G5 cannot run that.

Can video chat with Imac non-intel but not with Powerbooks

Hi,
I have a Linksys WRT54G firmware v. 1.0.6 connected to a Comcast Cable modem. My IMac Intel Duo (OS 10.4.6) is connected via ethernet cable to the router. I am set to DHCP on router and IMac. My Quicktime settings is at 1.5mb, I have tried with firewall off and on with the appropriate ports open. I have tried upnp on and off.
I can connect to other Imacs (non-intel) but not to powerbook G4's. With the Powerbooks I can text chat, but sometimes they can see my text, but I can't see theirs. And every video chat is a fail to respond with the powerbook, but they can connect with others.
Is there anything else I can do?
Please help. Thanks.

Hi cmbell,
Do you know how to access your modem ?
This should give you somewhere to turn off DHCP.
Then you go to System Preferences > Network and select the connection method you are using.
Then select the TCP/IP tab.
In the drop down that says Using DHCP change it to Manually. (or Manual with DHCP if doing James' way)
Type the IP you wish to use in the next entry field.
Copy the subnet mask form the Using DHCP
Copy any DNS servers listed.
Copy the router IP address which will be the modem or router in question.
Hit Apply.
Done.
9:23 PM Sunday; May 7, 2006
Message was edited by: Ralph Johns (UK)

Cloning Old iMac G4 HD to new (not Intel) G5 iMac HD????

I have a 3yr old white round-base, flat panel iMac and need to replicate my 60gb hard drive to a new 160gb G5 (not Intel version) iMac flat panel hard drive??? I plan to connect the 2 via a Firewire cable, then transfer the hard drive contents..any recommendations on how I should do this? Any input would be appreciated...Thanks!

Hi,Several different options including:
Target mode. Switch off the iMac G4. Connect the two machines via FW. Boot the iMac G4 holding down 'T'. You'll then enter 'Firewire Target Mode'. On the iMac G5 the iMac G4's hard disk will appear underneath Macintosh HD (but will be coloured orange) - I'd rename them to something other than Macintosh HD to avoid confusion. You can then drag and drop at your will. Just drag the orange icon to the trash when you're finished and hold in the iMac's power button to switch it off.
Use Tiger's Migration Assistant that automates and guides you through the above. MA will copy about 99% of your settings/documents/applications, icon positions, desktop picture, dock items etc. But most users notice a few errors/items not working properly - hence why I say 99%. MA can be found in Macintosh HD > Applications > Utilities > Migration Assistant.
HTH
mrtotes

HT3964 imac intel monitor not working

imac intel monitor not working

Hi Robby62,
please do report back.
Also, after you have successfully installed the BootCamp Drivers from the Leopard DVD (which are version 2.0, btw.) you might want to download the 2.1 version update here: http://www.apple.com/downloads/macosx/apple/application_updates/bootcampupdate21 forwindowsvista32.html
The update also has to be installed while in Windows.
Have Fun
Stefan

Someone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

omeone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

It is retail disk, i bought it in apple store. I also resetter PRRAM and SMC and checked disk. I also tried clean installation and upgrade, nothing works, after run installation program after few seconds wrote: OS X Snow Leopard cannot be install on this machine :-(
Thank you for your answer
Majo

Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?

Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?
Have tried repeatedly and end up shutting down instead of "sleeping:.

Hello, most usually it's some USB device causing that, but...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

How to get Snow Leopard for Mac 10.5.8 not Intel Based

how to get snow leopard to not intel based Mac 10.5.8

Is it a Mac Pro, or a Powermac?
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

Imac intel will not come on

My imac intel will not come on when you press the button

Have a look at > Intel-based iMac: What to do if your computer won't turn on

Transfer iphoto library from not intel based computer to ICloud.

how can i transfer pictures from iphoto on my powerbook G4 10.5.8 to icloud? it is not intel based computer. any easy way? thanks.

Can't be done. See iCloud Requirements http://support.apple.com/kb/HT4759
 Cheers, Tom

Radeon HD 7800 (catalyst) + Intel HD graphics (intel-dri) seg fault

Hello, Arch community!
I'm using two monitors setup: one is connected to the Radeon HD 7800 other is connected to the motherboard D-SUB socket.
Symptoms:
- X starts if to use opensource radeon driver.
- X starts if to use only one screen inside ServerLayout section.
- X fails to start If two screens are chosen in ServerLayout section and it prints the following log:
[ 1418.961]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 1419.012] X Protocol Version 11, Revision 0
[ 1419.027] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 1419.042] Current Operating System: Linux Aiur 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 1419.042] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=99bb2cbc-e482-402e-a1ec-91956ac95e90 rw nomodeset i915.modeset=1
[ 1419.070] Build Date: 27 June 2014 07:32:26PM
[ 1419.082]
[ 1419.095] Current version of pixman: 0.32.6
[ 1419.118] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1419.118] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1419.164] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Sep 7 00:53:38 2014
[ 1419.175] (++) Using config file: "xorg.conf"
[ 1419.187] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1419.198] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1419.199] (==) ServerLayout "aticonfig Layout"
[ 1419.199] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 1419.199] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 1419.199] (**) | |-->Device "aticonfig-Device[0]-0"
[ 1419.199] (**) |-->Screen "Screen1" (1)
[ 1419.199] (**) | |-->Monitor "Monitor1"
[ 1419.199] (**) | |-->Device "Card1"
[ 1419.199] (**) Option "Xinerama" "on"
[ 1419.199] (==) Automatically adding devices
[ 1419.199] (==) Automatically enabling devices
[ 1419.199] (==) Automatically adding GPU devices
[ 1419.199] (**) Xinerama: enabled
[ 1419.199] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1419.199] Entry deleted from font path.
[ 1419.199] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1419.199] Entry deleted from font path.
[ 1419.199] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1419.199] Entry deleted from font path.
[ 1419.199] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1419.199] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1419.199] Entry deleted from font path.
[ 1419.199] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1419.199] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 1419.199] (**) ModulePath set to "/usr/lib/fglrx,/usr/lib/xorg/modules,/usr/lib/dri/"
[ 1419.199] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1419.199] (II) Loader magic: 0x811cc0
[ 1419.199] (II) Module ABI versions:
[ 1419.199] X.Org ANSI C Emulation: 0.4
[ 1419.199] X.Org Video Driver: 15.0
[ 1419.199] X.Org XInput driver : 20.0
[ 1419.199] X.Org Server Extension : 8.0
[ 1419.199] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1419.200] (--) PCI: (0:0:2:0) 8086:0162:1849:0162 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 1419.200] (--) PCI:*(0:1:0:0) 1002:6819:1787:201c rev 0, Mem @ 0xe0000000/268435456, 0xf7c00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 1419.200] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1419.212] Initializing built-in extension Generic Event Extension
[ 1419.223] Initializing built-in extension SHAPE
[ 1419.235] Initializing built-in extension MIT-SHM
[ 1419.247] Initializing built-in extension XInputExtension
[ 1419.259] Initializing built-in extension XTEST
[ 1419.271] Initializing built-in extension BIG-REQUESTS
[ 1419.282] Initializing built-in extension SYNC
[ 1419.294] Initializing built-in extension XKEYBOARD
[ 1419.306] Initializing built-in extension XC-MISC
[ 1419.318] Initializing built-in extension SECURITY
[ 1419.330] Initializing built-in extension XINERAMA
[ 1419.341] Initializing built-in extension XFIXES
[ 1419.353] Initializing built-in extension RENDER
[ 1419.365] Initializing built-in extension RANDR
[ 1419.377] Initializing built-in extension COMPOSITE
[ 1419.388] Initializing built-in extension DAMAGE
[ 1419.400] Initializing built-in extension MIT-SCREEN-SAVER
[ 1419.412] Initializing built-in extension DOUBLE-BUFFER
[ 1419.424] Initializing built-in extension RECORD
[ 1419.435] Initializing built-in extension DPMS
[ 1419.447] Initializing built-in extension Present
[ 1419.459] Initializing built-in extension DRI3
[ 1419.470] Initializing built-in extension X-Resource
[ 1419.481] Initializing built-in extension XVideo
[ 1419.492] Initializing built-in extension XVideo-MotionCompensation
[ 1419.504] Initializing built-in extension XFree86-VidModeExtension
[ 1419.515] Initializing built-in extension XFree86-DGA
[ 1419.526] Initializing built-in extension XFree86-DRI
[ 1419.537] Initializing built-in extension DRI2
[ 1419.537] (II) "glx" will be loaded by default.
[ 1419.537] (II) LoadModule: "glx"
[ 1419.537] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1419.537] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 1419.537] compiled for 6.9.0, module version = 1.0.0
[ 1419.548] Loading extension GLX
[ 1419.548] (II) LoadModule: "fglrx"
[ 1419.548] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 1419.559] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 1419.559] compiled for 1.4.99.906, module version = 14.20.7
[ 1419.559] Module class: X.Org Video Driver
[ 1419.559] (II) Loading sub module "fglrxdrm"
[ 1419.559] (II) LoadModule: "fglrxdrm"
[ 1419.559] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 1419.559] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 1419.559] compiled for 1.4.99.906, module version = 14.20.7
[ 1419.559] (II) LoadModule: "intel"
[ 1419.559] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1419.560] (II) Module intel: vendor="X.Org Foundation"
[ 1419.560] compiled for 1.15.2, module version = 2.99.912
[ 1419.560] Module class: X.Org Video Driver
[ 1419.560] ABI class: X.Org Video Driver, version 15.0
[ 1419.560] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[ 1419.560] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.20
[ 1419.560] (II) AMD Proprietary Linux Driver Build Date: May 29 2014 10:25:55
[ 1419.560] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1419.560] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 1419.560] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 1419.560] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 1419.560] (--) using VT number 7
[ 1419.615] (WW) Falling back to old probe method for fglrx
[ 1419.626] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 1419.628] ukiDynamicMajor: found major device number 251
[ 1419.628] ukiDynamicMajor: found major device number 251
[ 1419.628] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1419.628] ukiOpenDevice: node name is /dev/ati/card0
[ 1419.628] ukiOpenDevice: open result is 11, (OK)
[ 1419.628] ukiOpenByBusid: ukiOpenMinor returns 11
[ 1419.628] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1419.631] (--) Chipset Supported AMD Graphics Processor (0x6819) found
[ 1419.631] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 1419.632] (II) fglrx(0): pEnt->device->identifier=0x222aea0
[ 1419.632] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 1419.632] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 1419.632] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 1419.632] (II) Loading sub module "vgahw"
[ 1419.632] (II) LoadModule: "vgahw"
[ 1419.632] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 1419.632] (II) Module vgahw: vendor="X.Org Foundation"
[ 1419.632] compiled for 1.15.2, module version = 0.1.0
[ 1419.632] ABI class: X.Org Video Driver, version 15.0
[ 1419.634] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 1419.634] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 1419.634] (==) fglrx(0): Default visual is TrueColor
[ 1419.634] (**) fglrx(0): Option "DPMS" "true"
[ 1419.634] (==) fglrx(0): RGB weight 888
[ 1419.634] (II) fglrx(0): Using 8 bits per RGB
[ 1419.634] (==) fglrx(0): Buffer Tiling is ON
[ 1419.634] (II) Loading sub module "fglrxdrm"
[ 1419.634] (II) LoadModule: "fglrxdrm"
[ 1419.634] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 1419.634] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 1419.634] compiled for 1.4.99.906, module version = 14.20.7
[ 1419.635] ukiDynamicMajor: found major device number 251
[ 1419.635] ukiDynamicMajor: found major device number 251
[ 1419.635] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1419.636] ukiOpenDevice: node name is /dev/ati/card0
[ 1419.636] ukiOpenDevice: open result is 15, (OK)
[ 1419.636] ukiOpenByBusid: ukiOpenMinor returns 15
[ 1419.636] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1419.636] (**) fglrx(0): NoAccel = NO
[ 1419.636] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 1419.636] (--) fglrx(0): Chipset: "AMD Radeon HD 7800 Series " (Chipset = 0x6819)
[ 1419.636] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x201c)
[ 1419.636] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 1419.636] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 1419.636] (--) fglrx(0): MMIO registers at 0xf7c00000
[ 1419.636] (--) fglrx(0): I/O port at 0x0000e000
[ 1419.636] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 1419.636] (II) fglrx(0): AC Adapter is used
[ 1419.636] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 1419.637] (II) Loading sub module "vbe"
[ 1419.637] (II) LoadModule: "vbe"
[ 1419.637] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 1419.637] (II) Module vbe: vendor="X.Org Foundation"
[ 1419.637] compiled for 1.15.2, module version = 1.1.0
[ 1419.637] ABI class: X.Org Video Driver, version 15.0
[ 1419.637] (II) fglrx(0): VESA BIOS detected
[ 1419.637] (II) fglrx(0): VESA VBE Version 3.0
[ 1419.637] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 1419.637] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 1419.637] (II) fglrx(0): VESA VBE OEM Software Rev: 15.20
[ 1419.637] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 1419.637] (II) fglrx(0): VESA VBE OEM Product: 01
[ 1419.637] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 1419.637] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 1419.637] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 1419.637] (II) fglrx(0): PCIE card detected
[ 1419.637] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 1419.637] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 1419.637] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 1419.637] (II) fglrx(0): RandR 1.2 support is enabled!
[ 1419.637] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 1419.637] (II) Loading sub module "fb"
[ 1419.637] (II) LoadModule: "fb"
[ 1419.637] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1419.638] (II) Module fb: vendor="X.Org Foundation"
[ 1419.638] compiled for 1.15.2, module version = 1.0.0
[ 1419.638] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1419.638] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 1419.638] (II) Loading sub module "ddc"
[ 1419.638] (II) LoadModule: "ddc"
[ 1419.638] (II) Module "ddc" already built-in
[ 1419.746] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 1419.746] (II) fglrx(0): Output DFP2 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP3 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP4 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP5 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP6 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP7 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP8 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP9 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP10 has no monitor section
[ 1419.746] (II) fglrx(0): Output CRT1 has no monitor section
[ 1419.746] (II) Loading sub module "ddc"
[ 1419.746] (II) LoadModule: "ddc"
[ 1419.746] (II) Module "ddc" already built-in
[ 1419.746] (II) fglrx(0): Connected Display0: CRT1
[ 1419.746] (II) fglrx(0): Display0 EDID data ---------------------------
[ 1419.746] (II) fglrx(0): Manufacturer: SAM Model: 8d7 Serial#: 842282293
[ 1419.746] (II) fglrx(0): Year: 2012 Week: 35
[ 1419.746] (II) fglrx(0): EDID Version: 1.3
[ 1419.746] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 1419.746] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 1419.747] (II) fglrx(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 1419.747] (II) fglrx(0): Gamma: 2.20
[ 1419.747] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 1419.747] (II) fglrx(0): First detailed timing is preferred mode
[ 1419.747] (II) fglrx(0): redX: 0.641 redY: 0.338 greenX: 0.315 greenY: 0.629
[ 1419.747] (II) fglrx(0): blueX: 0.159 blueY: 0.059 whiteX: 0.312 whiteY: 0.329
[ 1419.747] (II) fglrx(0): Supported established timings:
[ 1419.747] (II) fglrx(0): 720x400@70Hz
[ 1419.747] (II) fglrx(0): 640x480@60Hz
[ 1419.747] (II) fglrx(0): 640x480@67Hz
[ 1419.747] (II) fglrx(0): 640x480@72Hz
[ 1419.747] (II) fglrx(0): 640x480@75Hz
[ 1419.747] (II) fglrx(0): 800x600@56Hz
[ 1419.747] (II) fglrx(0): 800x600@60Hz
[ 1419.747] (II) fglrx(0): 800x600@72Hz
[ 1419.747] (II) fglrx(0): 800x600@75Hz
[ 1419.747] (II) fglrx(0): 832x624@75Hz
[ 1419.747] (II) fglrx(0): 1024x768@60Hz
[ 1419.747] (II) fglrx(0): 1024x768@70Hz
[ 1419.747] (II) fglrx(0): 1024x768@75Hz
[ 1419.747] (II) fglrx(0): 1280x1024@75Hz
[ 1419.747] (II) fglrx(0): 1152x864@75Hz
[ 1419.747] (II) fglrx(0): Manufacturer's mask: 0
[ 1419.747] (II) fglrx(0): Supported standard timings:
[ 1419.747] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1419.747] (II) fglrx(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 1419.747] (II) fglrx(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 1419.747] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1419.747] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 1419.747] (II) fglrx(0): #5: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1419.747] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 1419.747] (II) fglrx(0): Supported detailed timing:
[ 1419.747] (II) fglrx(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 1419.747] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1419.747] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1419.747] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 1419.747] (II) fglrx(0): Monitor name: S24B350
[ 1419.747] (II) fglrx(0): Serial No: HLNC800121
[ 1419.747] (II) fglrx(0): EDID (in hex):
[ 1419.747] (II) fglrx(0): 00ffffffffffff004c2dd70835353432
[ 1419.747] (II) fglrx(0): 231601030e341d782a2cc1a45650a128
[ 1419.747] (II) fglrx(0): 0f5054bfef80714f81c0810081809500
[ 1419.747] (II) fglrx(0): a9c0b3000101023a801871382d40582c
[ 1419.747] (II) fglrx(0): 450009252100001e000000fd00384b1e
[ 1419.747] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 1419.747] (II) fglrx(0): 3234423335300a2020202020000000ff
[ 1419.747] (II) fglrx(0): 00484c4e433830303132310a202000cc
[ 1419.747] (II) fglrx(0): End of Display0 EDID data --------------------
[ 1419.747] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 1419.747] (II) fglrx(0): EDID for output DFP1
[ 1419.747] (II) fglrx(0): EDID for output DFP2
[ 1419.747] (II) fglrx(0): EDID for output DFP3
[ 1419.747] (II) fglrx(0): EDID for output DFP4
[ 1419.747] (II) fglrx(0): EDID for output DFP5
[ 1419.747] (II) fglrx(0): EDID for output DFP6
[ 1419.747] (II) fglrx(0): EDID for output DFP7
[ 1419.747] (II) fglrx(0): EDID for output DFP8
[ 1419.747] (II) fglrx(0): EDID for output DFP9
[ 1419.747] (II) fglrx(0): EDID for output DFP10
[ 1419.747] (II) fglrx(0): EDID for output CRT1
[ 1419.747] (II) fglrx(0): Manufacturer: SAM Model: 8d7 Serial#: 842282293
[ 1419.747] (II) fglrx(0): Year: 2012 Week: 35
[ 1419.747] (II) fglrx(0): EDID Version: 1.3
[ 1419.747] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 1419.747] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 1419.747] (II) fglrx(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 1419.747] (II) fglrx(0): Gamma: 2.20
[ 1419.747] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 1419.747] (II) fglrx(0): First detailed timing is preferred mode
[ 1419.747] (II) fglrx(0): redX: 0.641 redY: 0.338 greenX: 0.315 greenY: 0.629
[ 1419.747] (II) fglrx(0): blueX: 0.159 blueY: 0.059 whiteX: 0.312 whiteY: 0.329
[ 1419.748] (II) fglrx(0): Supported established timings:
[ 1419.748] (II) fglrx(0): 720x400@70Hz
[ 1419.748] (II) fglrx(0): 640x480@60Hz
[ 1419.748] (II) fglrx(0): 640x480@67Hz
[ 1419.748] (II) fglrx(0): 640x480@72Hz
[ 1419.748] (II) fglrx(0): 640x480@75Hz
[ 1419.748] (II) fglrx(0): 800x600@56Hz
[ 1419.748] (II) fglrx(0): 800x600@60Hz
[ 1419.748] (II) fglrx(0): 800x600@72Hz
[ 1419.748] (II) fglrx(0): 800x600@75Hz
[ 1419.748] (II) fglrx(0): 832x624@75Hz
[ 1419.748] (II) fglrx(0): 1024x768@60Hz
[ 1419.748] (II) fglrx(0): 1024x768@70Hz
[ 1419.748] (II) fglrx(0): 1024x768@75Hz
[ 1419.748] (II) fglrx(0): 1280x1024@75Hz
[ 1419.748] (II) fglrx(0): 1152x864@75Hz
[ 1419.748] (II) fglrx(0): Manufacturer's mask: 0
[ 1419.748] (II) fglrx(0): Supported standard timings:
[ 1419.748] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1419.748] (II) fglrx(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 1419.748] (II) fglrx(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 1419.748] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1419.748] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 1419.748] (II) fglrx(0): #5: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1419.748] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 1419.748] (II) fglrx(0): Supported detailed timing:
[ 1419.748] (II) fglrx(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 1419.748] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1419.748] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1419.748] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 1419.748] (II) fglrx(0): Monitor name: S24B350
[ 1419.748] (II) fglrx(0): Serial No: HLNC800121
[ 1419.748] (II) fglrx(0): EDID (in hex):
[ 1419.748] (II) fglrx(0): 00ffffffffffff004c2dd70835353432
[ 1419.748] (II) fglrx(0): 231601030e341d782a2cc1a45650a128
[ 1419.748] (II) fglrx(0): 0f5054bfef80714f81c0810081809500
[ 1419.748] (II) fglrx(0): a9c0b3000101023a801871382d40582c
[ 1419.748] (II) fglrx(0): 450009252100001e000000fd00384b1e
[ 1419.748] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 1419.748] (II) fglrx(0): 3234423335300a2020202020000000ff
[ 1419.748] (II) fglrx(0): 00484c4e433830303132310a202000cc
[ 1419.748] (II) fglrx(0): Printing probed modes for output CRT1
[ 1419.748] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1419.748] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1400x1050"x60.0 146.25 1400 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1152x864"x60.0 148.50 1152 2008 2052 2200 864 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x768"x60.0 83.50 1280 1352 1480 1680 768 803 809 831 -hsync +vsync (49.7 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1419.748] (II) fglrx(0): Output DFP1 disconnected
[ 1419.748] (II) fglrx(0): Output DFP2 disconnected
[ 1419.748] (II) fglrx(0): Output DFP3 disconnected
[ 1419.748] (II) fglrx(0): Output DFP4 disconnected
[ 1419.748] (II) fglrx(0): Output DFP5 disconnected
[ 1419.748] (II) fglrx(0): Output DFP6 disconnected
[ 1419.748] (II) fglrx(0): Output DFP7 disconnected
[ 1419.748] (II) fglrx(0): Output DFP8 disconnected
[ 1419.748] (II) fglrx(0): Output DFP9 disconnected
[ 1419.748] (II) fglrx(0): Output DFP10 disconnected
[ 1419.748] (II) fglrx(0): Output CRT1 connected
[ 1419.748] (II) fglrx(0): Using exact sizes for initial modes
[ 1419.748] (II) fglrx(0): Output CRT1 using initial mode 1920x1080
[ 1419.748] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1419.748] (II) fglrx(0): DPI set to (96, 96)
[ 1419.748] (II) fglrx(0): Eyefinity capable adapter detected.
[ 1419.748] (II) fglrx(0): Adapter AMD Radeon HD 7800 Series has 6 configurable heads and 1 displays connected.
[ 1419.748] (==) fglrx(0): PseudoColor visuals disabled
[ 1419.748] (II) Loading sub module "ramdac"
[ 1419.748] (II) LoadModule: "ramdac"
[ 1419.748] (II) Module "ramdac" already built-in
[ 1419.748] (==) fglrx(0): NoDRI = NO
[ 1419.748] (==) fglrx(0): Capabilities: 0x00000000
[ 1419.748] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 1419.748] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 1419.748] (==) fglrx(0): UseFastTLS=0
[ 1419.748] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 1419.748] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 1419.748] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 1419.748] (==) intel(1): Depth 24, (--) framebuffer bpp 32
[ 1419.748] (==) intel(1): RGB weight 888
[ 1419.748] (==) intel(1): Default visual is TrueColor
[ 1419.748] (**) intel(1): Option "AccelMethod" "sna"
[ 1419.749] (**) intel(1): Framebuffer tiled
[ 1419.749] (**) intel(1): Pixmaps tiled
[ 1419.749] (**) intel(1): Forcing per-crtc-pixmaps? no
[ 1419.749] (II) intel(1): Output VGA1 using monitor section Monitor1
[ 1419.749] (II) intel(1): Output HDMI1 has no monitor section
[ 1419.749] (II) intel(1): Output DP1 has no monitor section
[ 1419.749] (II) intel(1): Output HDMI2 has no monitor section
[ 1419.749] (II) intel(1): Output HDMI3 has no monitor section
[ 1419.749] (II) intel(1): Output DP2 has no monitor section
[ 1419.749] (II) intel(1): Output DP3 has no monitor section
[ 1419.749] (--) intel(1): Using a maximum size of 256x256 for hardware cursors
[ 1419.749] (II) intel(1): Output VIRTUAL1 has no monitor section
[ 1419.749] (--) intel(1): Output VGA1 using initial mode 1366x768 on pipe 0
[ 1419.749] (**) intel(1): TearFree disabled
[ 1419.749] (==) intel(1): DPI set to (96, 96)
[ 1419.749] (II) Loading sub module "dri3"
[ 1419.749] (II) LoadModule: "dri3"
[ 1419.749] (WW) Warning, couldn't open module dri3
[ 1419.749] (II) UnloadModule: "dri3"
[ 1419.749] (II) Unloading dri3
[ 1419.749] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[ 1419.749] (II) Loading sub module "dri2"
[ 1419.749] (II) LoadModule: "dri2"
[ 1419.749] (II) Module "dri2" already built-in
[ 1419.749] (II) Loading sub module "present"
[ 1419.749] (II) LoadModule: "present"
[ 1419.749] (WW) Warning, couldn't open module present
[ 1419.749] (II) UnloadModule: "present"
[ 1419.749] (II) Unloading present
[ 1419.749] (EE) intel: Failed to load module "present" (module does not exist, 0)
[ 1421.895] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 1421.895] (EE) intel(G0): Failed to claim DRM device.
[ 1421.895] (II) UnloadModule: "intel"
[ 1421.895] (--) Depth 24 pixmap format is 32 bpp
[ 1421.895] Loading extension ATIFGLRXDRI
[ 1421.895] (II) fglrx(0): doing swlDriScreenInit
[ 1421.895] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 1421.895] ukiDynamicMajor: found major device number 251
[ 1421.895] ukiDynamicMajor: found major device number 251
[ 1421.895] ukiDynamicMajor: found major device number 251
[ 1421.895] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1421.895] ukiOpenDevice: node name is /dev/ati/card0
[ 1421.895] ukiOpenDevice: open result is 17, (OK)
[ 1421.895] ukiOpenByBusid: ukiOpenMinor returns 17
[ 1421.895] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1421.895] (II) fglrx(0): [uki] DRM interface version 1.0
[ 1421.895] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 1421.895] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x6277000
[ 1421.895] (II) fglrx(0): [uki] mapped SAREA 0x6277000 to 0x7f0fb99f3000
[ 1421.895] (II) fglrx(0): [uki] framebuffer handle = 0x31000
[ 1421.896] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 1421.896] (II) fglrx(0): swlDriScreenInit done
[ 1421.896] (II) fglrx(0): Kernel Module Version Information:
[ 1421.896] (II) fglrx(0): Name: fglrx
[ 1421.896] (II) fglrx(0): Version: 14.20.7
[ 1421.896] (II) fglrx(0): Date: May 29 2014
[ 1421.896] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 1421.896] (II) fglrx(0): Kernel Module version matches driver.
[ 1421.896] (II) fglrx(0): Kernel Module Build Time Information:
[ 1421.896] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.16.1-1-ARCH
[ 1421.896] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 1421.896] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 1421.896] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 1421.896] (II) fglrx(0): [uki] register handle = 0x00032000
[ 1421.896] (II) fglrx(0): DRI initialization successfull
[ 1421.896] (II) fglrx(0): FBADPhys: 0xf403280000 FBMappedSize: 0x010e0000
[ 1421.897] (==) fglrx(0): Backing store enabled
[ 1421.897] Loading extension FGLRXEXTENSION
[ 1421.897] (**) fglrx(0): DPMS enabled
[ 1421.897] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 1421.897] (**) fglrx(0): Textured Video is enabled.
[ 1421.897] (II) LoadModule: "glesx"
[ 1421.897] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 1421.898] (II) Module glesx: vendor="X.Org Foundation"
[ 1421.898] compiled for 1.4.99.906, module version = 1.0.0
[ 1421.898] Loading extension GLESX
[ 1421.898] (II) fglrx(0): GLESX enableFlags = 8784
[ 1421.898] (II) fglrx(0): GLESX is enabled
[ 1421.898] (II) LoadModule: "amdxmm"
[ 1421.898] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 1421.898] (II) Module amdxmm: vendor="X.Org Foundation"
[ 1421.898] compiled for 1.4.99.906, module version = 2.0.0
[ 1421.913] Loading extension AMDXVOPL
[ 1421.913] Loading extension AMDXVBA
[ 1421.914] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 1421.916] (II) fglrx(0): Composite extension is not loaded
[ 1421.916] (WW) fglrx(0): Option "VendorName" is not used
[ 1421.916] (WW) fglrx(0): Option "ModelName" is not used
[ 1421.916] (II) fglrx(0): X context handle = 0x4
[ 1421.916] (II) fglrx(0): [DRI] installation complete
[ 1421.916] (==) fglrx(0): Silken mouse enabled
[ 1421.916] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 1421.917] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1422.048] (--) RandR disabled
[ 1422.048] (II) intel(1): SNA initialized with Ivybridge (gen7, gt2) backend
[ 1422.048] (==) intel(1): Backing store disabled
[ 1422.048] (==) intel(1): Silken mouse enabled
[ 1422.048] (II) intel(1): HW Cursor enabled
[ 1422.048] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1422.048] (==) intel(1): DPMS enabled
[ 1422.048] (II) intel(1): [DRI2] Setup complete
[ 1422.048] (II) intel(1): [DRI2] DRI driver: i965
[ 1422.048] (II) intel(1): [DRI2] VDPAU driver: i965
[ 1422.048] (II) intel(1): direct rendering: DRI2 enabled
[ 1422.048] (==) intel(1): hotplug detection: "enabled"
[ 1422.048] (--) RandR disabled
[ 1422.052] ukiDynamicMajor: found major device number 251
[ 1422.052] ukiDynamicMajor: found major device number 251
[ 1422.052] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1422.052] ukiOpenDevice: node name is /dev/ati/card0
[ 1422.052] ukiOpenDevice: open result is 19, (OK)
[ 1422.052] ukiOpenByBusid: ukiOpenMinor returns 19
[ 1422.052] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1422.052] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 1422.053] ukiDynamicMajor: found major device number 251
[ 1422.053] ukiDynamicMajor: found major device number 251
[ 1422.053] ukiDynamicMajor: found major device number 251
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card0
[ 1422.053] ukiOpenDevice: open result is 20, (OK)
[ 1422.053] ukiGetBusid returned 'PCI:1:0:0'
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card1
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card2
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card3
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card4
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card5
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card6
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card7
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card8
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card9
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card10
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card11
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card12
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card13
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card14
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card15
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiDynamicMajor: found major device number 251
[ 1422.054] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card0
[ 1422.054] ukiOpenDevice: open result is 20, (OK)
[ 1422.054] ukiOpenByBusid: ukiOpenMinor returns 20
[ 1422.054] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1422.074] (EE)
[ 1422.074] (EE) Backtrace:
[ 1422.074] (EE) 0: X (xorg_backtrace+0x56) [0x58f186]
[ 1422.074] (EE) 1: X (0x400000+0x192fc9) [0x592fc9]
[ 1422.074] (EE) 2: /usr/lib/libpthread.so.0 (0x7f0fb8eeb000+0xf4b0) [0x7f0fb8efa4b0]
[ 1422.075] (EE) 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs115_atiddxGetGPUMapInfo+0x19c) [0x7f0fb51ecf5c]
[ 1422.075] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxGetGPUMapInfo+0xd) [0x7f0fb4fffb2d]
[ 1422.075] (EE) 5: /usr/lib/xorg/modules/extensions/libglx.so (0x7f0fb5e26000+0x1ddfd) [0x7f0fb5e43dfd]
[ 1422.075] (EE) 6: /usr/lib/xorg/modules/extensions/libglx.so (0x7f0fb5e26000+0x1f6f5) [0x7f0fb5e456f5]
[ 1422.075] (EE) 7: X (InitExtensions+0x41) [0x4aa4a1]
[ 1422.075] (EE) 8: X (0x400000+0x3ab4f) [0x43ab4f]
[ 1422.075] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f0fb7b55000]
[ 1422.075] (EE) 10: X (0x400000+0x250fe) [0x4250fe]
[ 1422.075] (EE)
[ 1422.075] (EE) Segmentation fault at address 0x30000014c
[ 1422.075] (EE)
Fatal server error:
[ 1422.075] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 1422.075] (EE)
[ 1422.075] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1422.075] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 1422.075] (EE)
[ 1422.075] (II) fglrx(0): Backup framebuffer data.
[ 1422.107] (II) fglrx(0): Backup complete.
[ 1422.416] (EE) Server terminated with error (1). Closing log file.
My xorg.conf (I've merged output from ati-config with existing one for intel):
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen 1 "Screen1" RightOf "aticonfig-Screen[0]-0"
Option "Xinerama" "on"
Option "Clone" "off"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Files"
ModulePath "/usr/lib/fglrx"
ModulePath "/usr/lib/xorg/modules"
ModulePath "/usr/lib/dri/"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
Option "AccelMethod" "uxa"
#Option "Backlight" # <str>
#Option "DRI" # <str>
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
lscpi:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 Display controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4)
00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
03:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57781 Gigabit Ethernet PCIe (rev 10)
05:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)
07:00.0 Network controller: Qualcomm Atheros AR93xx Wireless Network Adapter (rev 01)
08:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
I've made a few changes that were mentioned on the Catalyst wiki. They are below:
1. /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset i915.modeset=1"
2. /etc/modprobe.d/no_radeon.conf
blacklist radeon
Unfortunately I can't use open-source driver for radeon since I'm getting random frezees of my PC. Especially when some video-content is playing in my browser.
It doesn't relates to main topic (I hope), but let this log be placed here:
Sep 06 04:24:23 Aiur kernel: radeon 0000:01:00.0: ring 5 stalled for more than 10000msec
Sep 06 04:24:23 Aiur kernel: radeon 0000:01:00.0: GPU lockup (waiting for 0x0000000000000004 last fence id 0x0000000000
Sep 06 04:24:23 Aiur kernel: [drm:uvd_v1_0_ib_test] *ERROR* radeon: fence wait failed (-35).
Sep 06 04:24:23 Aiur kernel: [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35).
Sep 06 04:24:23 Aiur kernel: [drm:radeon_pm_resume_dpm] *ERROR* radeon: dpm resume failed
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: GPU fault detected: 146 0x00c28404
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00012206
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02084004
Sep 06 04:24:24 Aiur kernel: VM fault (0x04, vmid 1) at page 74246, read from TC (132)
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: GPU fault detected: 146 0x00c28404
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00012206
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02084004
Sep 06 04:24:24 Aiur kernel: VM fault (0x04, vmid 1) at page 74246, read from TC (132)
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: GPU fault detected: 146 0x00c2c804
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00012206
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x020C8004
Sep 06 04:24:24 Aiur kernel: VM fault (0x04, vmid 1) at page 74246, read from TC (200)
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: GPU fault detected: 146 0x00c2c404
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00012206
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x020C4004
Sep 06 04:24:24 Aiur kernel: VM fault (0x04, vmid 1) at page 74246, read from TC (196)
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: GPU fault detected: 146 0x00c2c404
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00012207
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02048004
Thanks for everyone!
Max

Search the forums for "ati fglrx intel xorg", try using the default aticonfig setup for dual heads with:
aticonfig --initial=dual-head

Driver for Intel Corp. Intel(R) PRO/Wireless 2200BG in Solaris 10 x86

Hi Folks,
I bought a Laptop with the NIC mentioned in the Subject. After installing Solaris 10 x86 I'd like to install a driver for this card. Can someone of you tell me how, or point me to a good documentation?
Cheers
Sven

as far as i know, intel wireless not supported yet in solaris 10.
damn, intel and solaris have not realy work our on their support relationships. No wonder Sun went for AMD. :p

Windows Update for windows 7 won't update the Intel Corporation - Display - Intel (R) HD Graphics

Hi there, a couple of times the windows update on my windows 7 won't update the Intel Corporation - Display - Intel (R) HD Graphics.
What could be the problem?
How can this be solved?

Hello palette35,
Welcome to the community.
You’re having problems with windows not updating the graphics.
It could be security setting blocking the update
You can go to HP.com and download the driver directly.
Here is a link to the site. You’ll need your product number.
Let me know if this helps.

Intel or not intel???

Similar Messages

Maybe you are looking for