Intel Pro/1000 Lan Adapter Sofware PROSet will not install on TP x60

I was able to install the updated drivers in the 2009-5-19 version successfully, but when I try to install the ProSET software, I keep getting this message:
"The installed version of Intel PROSet is not supported for upgrades. You must uninstall it before installing this version."
I have uninstalled the older version and also the PROSet Wireless driver as recommended in the text file installation instructions. I keep getting the same results.
Can anyone help me get this software installed?
Thanks,
Bob Neufeld

check BIOS / configuration and see if INTERNAL LAN is enbaled or disabled. i had this happen when my wireless and lan were not working. fixed it in bios.
T7600, T60p - 2GB - 2.33GHZ - 100GB

Similar Messages

MacBook Pro EFI Firmware Update 2.0 will not install.

Hi
The latest MacBook Pro EFI Firmware Update 2.0 will not install.
It runs and I restart my Mac but when I search for more updates it appears as a required update again.
Anyone know why this may be?

I had the same problem today. I called Apple support who transferred me to second level support and no resolution. I decided to try a combination of the items I have seen below.
I restarted my computer. I went to apple support download and downloaded the software EFI firmware update 2.0 by typing in search window. I made sure the power cord was pulled into the wall and the laptop had a FULL charge. I installed the update and the computer restarted.
I went to check the software update window after the update and restart completed and SUCCESSFUL.
I do not know why the Genius Bar or the second level support could not resolve my issues but, by me reading information here I hope at least this issue is resolved.
Thanks ALL.......... Happy Mac ing

MacBook Pro 10.6.8 software updates will not install

I have five software updates that will not install. I have checked my hardware and my disk space and all seem fine. I also, downloaded and installed the Apple Software Installer Update 1.0 but my updates will still not install. Any other suggestions?

Installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you. Restart your Mac after the combo is installed. It's ok to do this even though you are already running v10.6.8. Then try launching the app.
if that doesn't help, try contacting the developer of the app > http://support.aspyr.com/home

T61 Intel Pro 1000 Lan Adpater not working

Hello, I have a T61 7664-17U. I recently had to replace the hard drive on this system due to drive read errors.
I have all of my system up to date and working, except the lan adapter. I have the 82566MM Gigabit connection in the network connections but there is no communication when i connect the rj45 cable. I would like to get this working as my office does not
have a wireless connection and i need to use the system there. Could anyone please guide me to the correct driver and how to install it so i get things finished up and working. Any suggestions would be appreciated.

check BIOS / configuration and see if INTERNAL LAN is enbaled or disabled. i had this happen when my wireless and lan were not working. fixed it in bios.
T7600, T60p - 2GB - 2.33GHZ - 100GB

MacBook Pro 15" (Late 2013, 11.3) will not install Windows 7SP1 Pro

Hi All,
I have had many go's at this, but I am unable to install Windows 7 bootcamp on my late 2013 15" retina macbook pro.
First I'll head off with the specs:
Model Name: MacBook Pro
Model Identifier: MacBookPro11,3
Processor Name: Intel Core i7
Processor Speed: 2,3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MBP112.0138.B02
SMC Version (system): 2.19f3
NVIDIA GeForce GT 750M (and the Intel of course)
512GB SSD
16GB USB3 thumbdrive
Windows 7SP1-U
Windows 8.1
First try:
Run bootcamp assistant (Version 5.1.2 (484))
Let it run and run, changed the partition to 101GB, eventually at the installer screen it asks for drivers. Dunno which, but keyboard and mouse fully functional
Second Try:
Run bootcamp assistant (Version 5.1.2 (484))
Update drivers from BootCamp5.1.5621
Same issue... no drivers for, I don't know which driver
Third Try:
Run bootcamp assistant (Version 5.1.2 (484))
Update drivers from BootCamp5.1.5621
boot with alt and boot into osx
remove the partition made by assistant and redo that by making a exFAT
reboot and start windows installer from USB
Same issue... no drivers for, I don't know which driver
Fourth try:
Same as third, but with a USB2 thumbdrive
fail...
Fifth try:
Run bootcamp assistant (Version 5.1.2 (484))
Copied Intel(R)_USB_3.0_eXtensible_Host_Controller_Driver (read it somewhere but cant find the page anymore, downloaded from the Intel site)
Reboot, no KB/mouse so that failed
Sixth Try:
Run bootcamp assistant (Version 5.1.2 (484)) but with a Windows 8.1 ISO
Update drivers from BootCamp5.1.5621
Finally I had the opportunity to install Windows, but... v8. (and I want 7)
Let the install continue, but exited after 1 hour staring at "almost finished"
Seventh try:
Run bootcamp assistant (Version 5.1.2 (484)) but with a Windows 8.1 ISO
Update drivers from BootCamp5.1.5621
boot with alt and boot into osx
remove the partition made by assistant and redo that by making a exFAT
reboot and start windows installer from USB
Let the install continue, but exited after 45 minutes staring at "almost finished" (less patient this time)
Eight try:
Same as try #2, hoping to get lucky....?
Unfortunately I can't come up with options. So any suggestions are welcome!
Maybe Win7 will never install on this
Maybe I need a different Windows 8 ISO
Can't go back to OSX 10.8 as it's not supported on this Macbook.
Ow... and why do I want Windows? Need to test several pieces of software which don't run on Mac
(also wanna play the Windows games with Steam in freetime)
Thanks!!!!

vadik.l wrote:
Yes, as I already mentioned above:
Also I'm using TimeMachine + external HDD (do backups once in 2 weeks).
Sorry I missed that.
This is what I think is happening:
http://support.apple.com/kb/HT4878
There are two options, keep the Time Machine HDD connected full time or turn Time Machine off and on only when you want to make the backup.
Ciao.

Acrobat Pro XI 11.0.7 update will not install - error 1603

This is on Windows7 64-bit PCs running Acrobat Pro XI 11.0.0, 11.0.3, 11.0.4, or 11.0.6, we have 7 machines in this state. Have uninstalled, have used Acrobat uninstall tool in safe moved to remove old app. 11.0.0 will reinstall but 11.0.7 update will not. Gets well into the patching section, then stops and rolls back, error 1603.

Hello,
Please refer to following article:
http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Regards,
Anoop

T61 - Use Lenovo or Intel Pro/1000 Lan Driver?

The latest driver that Lenovo is posting for the wired Intel 82566MM NIC in the T61 is version 9.7.255.0 dated 3/5/2008.
The latest driver that Intel is posting for the same NIC is version 9.12.17.0 dated 2/6/2008.
I would assume that the Intel one is newer based on version numbers, despite the older date, but I'm not sure.
Anybody using the Intel one and confirm it is newer?
Solved!
Go to Solution.

We just updated 20 odd T61p machines and 60 more pending with V9.21.17.0 and must conclude that LENOVO is not really a good source for driver updates.
All our problems disappeared.
The worst one being the machine not able to rejoin the network after coming out of hibernation connected to the dockingstation.

Acrobat products (Acrobat Pro, PS CS6 and LR 5) will not install

I have a new Macbook Pro Retina 15 system. I used the Mac Sync to copy files to the system.
Adobe products (Acrobat Pro XI, PS CS6 would not run. Note, I am NOT a coud user, I OWN these products.
I remvoed the products. I tried running the installer and it fails. Non-decript error says to contact support at Adobe. I tried running the support advisor. It sees no issues and says to contact Adobe.
When I download new installers for the products from Adobe licensing the install fails. Does not matter if I use the key or install as a trial.
What can I do to get the apps working again?
-Mike

Hello,
Please refer to following article:
http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Regards,
Anoop

Laser jet pro 100 color mfp m175nw software will not install

During the prepare to install stage before I have connected the printer I get at 85% on the blue extracting bar: ERROR A problem occurred while preparing to install softwar on your system. Please restart your computer and run this installer again. If the problem persists, please check the product support website for your product.
I have been all through the suggestions including downloading the latest software, checking that the printer spooler is running and on automatic - nothing works. I have urgent ptinting jobs to do and this is most frustrating!
This question was solved.
View Solution.

Hi,
I had this problem just today. It took me a while but I have made it work.
First I changed the Print Spooler to MANUAL (in services.msc).
I then ran msconfig. Went to the services tab and checked the box to hide all Microsoft Services and then I disabled ALL of the remaining services, saved and rebooted.
I ran the software as administrator and it worked.
I think the main thing is the msconfig step but I had done all of what I listed above.
I am going to install it then change it all back to normal.
Hope this helps
Douglas

How to install driver for Intel Pro 1000 PCI Network-card

Hello,
I just bought the a.m. Intel Pro 1000 Network adapter, but I don't know at all how to install the driver for Solaris 10.
The installation instructions delivered from Intel didn't help me at all, because I can't uncompress the INTCGigae.pkg and the INTCGigaE.tar.z files.
I copied them to /tmp and folllowed Intel's Installlation Instructions.
Please keep in mind I am new to Solaris 10, with no Linux/Unix experience, when helping me.
Thanks in advance for help and assistance.

Hi!
And what happens if you install the driver from the Toshiba WLAN portal:
http://aps2.toshiba-tro.de/wlan
I still dont know what you mean with Askey for Toshiba
You should try to install the driver manually. Choose in device manager the WLAN card, right click and select Update Driver. Choose the advanced installation where you can choose the driver directory yourself and navigate to the folder where you have stored the downloaded driver.

Intel pro/1000 CT Speed Issue

Has anyone experienced a drop to 10MBPS from 100MBPS using the Intel pro/1000 CT adapter on the Neo2 865P? If I manually set it to 100 MBPS it says "Network Cable Unplugged". Very strange since it was running at 100 MBPS for a week.

I can not force 100mbs either. It says Network cable unplugged when I try. here are my IRQs:
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 13   Numeric data processor   OK
IRQ 15   Intel(R) 82801EB SMBus Controller - 24D3   OK
IRQ 16   NVIDIA GeForce4 MX 420   OK
IRQ 16   Intel(R) 82801EB USB Universal Host Controller - 24D2   OK
IRQ 16   Intel(R) 82801EB USB Universal Host Controller - 24DE   OK
IRQ 17   Intel(R) 536EP Modem   OK
IRQ 17   C-Media AC97 Audio Device   OK
IRQ 18   Intel(R) PRO/1000 CT Network Connection   OK
IRQ 18   Intel(R) 82801EB USB Universal Host Controller - 24D7   OK
IRQ 18   Intel(R) 82801EB Ultra ATA Storage Controllers   OK
IRQ 18   Intel(R) 82801EB Ultra ATA Storage Controllers   OK
IRQ 19   Intel(R) 82801EB USB Universal Host Controller - 24D4   OK
IRQ 21   VIA OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 23   Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD   OK
I noticed on boot that my Network adapter and IDE controller are both on IRQ 10.

P35 Platinum - Intel PRO 1000 MT Network Adapter problem

Greetings.
Found out very strage thing - installation of "Intel PRO 1000 MT Network Adapter" in any PCI slot disabled onboard Intel raid controller! :(
If this card installed Intel Matrix Storage Manager screen do not appear in boot process and Raid do not listed in Boot Sequence bios options, instead
I can see Network Adapter in this list. I tryed "Boot from othe devices" option, bus it not work too.
So with this adapter installed I'm not able to boot from raid.
Currently I use bios version 1.4
Any idea how to solve this?
P.S. Installation of old 3COM 3C905CX-TX-M Adapter did not have such effect, but there is no Win x64 drivers for it.

Hi Maesus,
Thanks, I did and filled information about my computer configuration.
Hope it'll help solve the problem.
AaronYuri, thans go reply.
But maybe it's some misundestanding - when I say that installation of Intel adapter in PCI slot "disabled onboard Intel raid controllr" it does not mean that raid controller disabled in bios settings - settings in "Integrated Peripherals->On-chip ATA devices" are the same (PCI IDE BusMaster = Enabled, Raid mode = RAID), but it's looks like bios "did not see" raid controller - it disappers from list of devices to boot from and I did not see screen of Intel Matrix in boot proces (this screen alwais presents if controller switched in raid mode)

Intel Pro/1000

Hi,
A probably silly question follows.
I was given an Intel Pro/1000 Gigabit Ethernet adapter ( 1000BASE-SX )
and I was wondering if I can fit it to a Sun Ultra 30. I plan to buy another
Sun workstation soon ( probably a Blade 1000 or 2000, will see ), will it
fit there?
( I am after a Sun adapter but just in case... )
Regards,
Nick.

Ops!
Thank you for your reply. :-)
Nick.

Network card: e1000g (Intel PRO/1000 MT) did not working properly

Hi to everyone!
I'm having some strange trouble.
All computers attached to one DLink gigabit switch
Server #1:
nf4-based motherboard, Intel PRO/1000 MT net card, onboard net card (forcedeth driver used) Ubuntu Linux 2.6.25 kernel version.
All just working.
Server #2:
nf6-based motherboard, same Intel net card, SunOS 5.11 snv_86.
All just working.
Server #3:
Same as server's #1 nf4-based motherboard. Same onboard card. Same SunOS 5.11 snv_86 as server #2 have installed.
Its work. BUT..
Intel card is not working as expected.
It is seen by system. It is properly up and running. It is sending packent and receiving packets. Ierrs=Oerrs=Collis=Queue=0.
But thru e1000g0 interface no one computer can reach this one, and from server #3 no one computer is seen thru e1000g0. Exept...
Except two old Sunray1 devices (attached to the same switch for testing purposes)! But even these devices seen only by arp requests, and is not pingable.
It is some mistery, but if I turn on jubmo frames, these rays got a picture from SRSS, testing on this sevrer! Not for long, heh, they hung up fast, but this is proof a physical connection :)
So, I can not disable onboard network card on Server #3 - server becoming unreachable :(
I know, those network cards must work on Solaris - as they did it on server #2. I know, those network cards work with my nf4-based motherboards - as they did it on server #1.
But I can't uderstand, whait is going on with e1000g driver on server #3!
P.S. Kernel driver e1000g settings are the same. All difference from servers #2 and #3 is: #2 had Intel netcard installed then Solaris was setting up, and #3 had Intel netcard installed later. All netcards are working (I trying to swap them from one computer to another - did not change anything).

*) #3 thinks it is sending, but a NIC/driver error prevents it.NIC is fully health. It is tested on another PC. Driver error - or driver's bad implementation - is the one I'm thinking.
*) #3 has a bad transmit pair of wires (would affect all communication)This patchcord works w/o problems on other PCs and even on onboard NIC of server #3.
*) Network problemsHeh :)
*) Firewall or other device is dropping the ARP repliesIt is some very stealthy and very selective firewall, affecting only external NICs :)
BTW, then cord is attached to NIC, it sends "who has this IP" requests, asking to be shure there will not be an IP conflict. No one seen this requests.
*) #1 has a NIC/driver error preventing it from seeing the reply.Only for send from #3? It is like a firewall on #3 :) And, there is more PCs, not only #1-#3. No one can see #3's replays (or asks), not only #1..
I'm repeating: this PC works in network now on onboard NIC w/o problems. But onboard NIC is only 100 Mb/s, and we need 1 Gb/s.
I was thinking, Solaris took wrong MAC for NICs - but not, ifconfig shows the same MACs as marked on NICs.
Even more, yesterday i plumbed e1000g1 - second Intel NIC in server #3. And I was surprised - it worked perfectly!
But I make "touch /reconfigure; init 6" - and after reboot, no one of two Intel NICs working again :( They both have the same behavior - no one can see packets they sends.)
I even try to restrict connection on 100 Mb/s by driver's .conf modify - it works, link become yellow instead of green (take a note, NIC is able to "speak" properly with switch!), but all other stay the same.
Strange, really strange behavior. More strange is a fact this NICs work on another instance of same SunOS, but on different motherboard, while the same MB with same NIC is working w/o problems under Ubuntu. Looks like some bug in Solaris driver.

Lenovo/IBM 8113-d5u + Intel 945 + Intell Pro 1000 PM

We recently received some boxes from Lenovo part number 8113-d5u. They use
the Intell 945 chipset and have an integrated Intel Pro 1000 PM on a PCIE bus.
When we PXE boot it fails to find drivers for ethernet. This happens
during the loading of linux.2. We added e1000.ko to the list of drivers to
load in /etc/nwdriverList but this does not work.
Error message on PXE boot is:
"Unable to detect network card. Check documentation for list of supported
cards."
From dmesg when loading the e1000 module:
e1000: no version magic, tainting kernel.
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
Copyright (c) 1999-2004 Intel Corporation.
This board is the first board we've had with a PCIE connected ethernet
controller.
We are using a modified PXE image (from Novell forge with SATA support),
but the same error happens on the vanilla one from Novell.
Any help will be greatly appreciated!

Unsure if you mean the same as we have here using IBM T60 and M52, added
the latest intel driver to our imaging environment and it worked. Trying
to load to forge but can't see where to load. Using Zfd 4 SP6.
I had to build a Linux box to create the driver file, used Redhat 7.3 so
that we had an old version of GCC to compile.
Drop me an email if you want me to send our linux.1 and linux.2 or just
the e1000.o
Remove the __ to email me
Thanks
Steve Gardiner
> We recently received some boxes from Lenovo part number 8113-d5u. They
use
> the Intell 945 chipset and have an integrated Intel Pro 1000 PM on a
PCIE bus.
>
> When we PXE boot it fails to find drivers for ethernet. This happens
> during the loading of linux.2. We added e1000.ko to the list of drivers
to
> load in /etc/nwdriverList but this does not work.
>
> Error message on PXE boot is:
> "Unable to detect network card. Check documentation for list of supported
> cards."
>
> From dmesg when loading the e1000 module:
> e1000: no version magic, tainting kernel.
> Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
> Copyright (c) 1999-2004 Intel Corporation.
>
> This board is the first board we've had with a PCIE connected ethernet
> controller.
>
> We are using a modified PXE image (from Novell forge with SATA support),
> but the same error happens on the vanilla one from Novell.
>
> Any help will be greatly appreciated!

Intel Pro/1000 Lan Adapter Sofware PROSet will not install on TP x60

Similar Messages

Maybe you are looking for