Intel PRO/Wireless Protected Connectioon

I've been using my security connection after help from users on this forum. When I display what connections are configured, I see the secure connection and a second non-secured connection with the same name. If I exclude the non-secure connection, the next time I boot my system and wait for the wireless connection to connect, it does not until I enable the un-secured connection. Why?

hi....this may happen if u have a "wireless profile" defined on your PC....to verify ...got to the control panel and then to network connections.....right click on the wireless network connection and select properties.....click on the "wireless network" tab, and under "preferred netrwork" check if your SSID has been specified .....select and remove....retart your PC and see what happens.

Similar Messages

  • Intel PRO/Wireless 3945ABG Crashes XP-Pro T61

    I recently updated my windows XP Pro SP2 version of windows to SP3. When I went to connect my wireless, it successfully connected, but then I got the BSOD suggesting I uninstall any recently installed h/w or s/w. Windows error reporting suggested a wireless adapter problem, and sure enough, as soon as I disabled the Intel® PRO/Wireless 3945ABG Network Connection adapter, the crashing stopped. So I went into device drivers, and attempted to update the driver, but was told that it was already updated.
    Then I went to Intel’s website and found a couple of updates, but they indicated:
    “The driver version of the following products will not update. The Intel PROSet/Wireless WiFi Software version will be updated.
    Intel® PRO/Wireless 3945ABG Network Connection”
    So since I prefer to use the ThinkVantage Access connections, I decided to run ThinkVantage System Update, but got the message: “An error occurred while gathering user information.” So I was going to try the solution George had given me a few days ago to solve my “T42 will not connect to secure home wireless/ThinkVantage Access Connections Freezes” problem:
    Of downloading the latest version of System Update from here:
     http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013489
    But I wasn’t sure that would work for my T61 Type 7665-CTO s/n **-***** 08/05. Product ID 7665WZK.
    Moderator note: serial number removed for member's protection.

    'afternoon.
    first, you should edit your post to remove your serial number.
    next, the version of TVSU you linked is correct for your XP machine. the version for win7 was just updated to v5.
    finally, if you want to bypass TVSU, for now, you can get any drivers for your PC from the driver matrix here:
    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-67853
    looks like the WLAN driver pack you could use is v14.03.000 available here:
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS030245
    hth.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Update Intel Pro Wireless driver

    I am trying to update my Intel PRO/Wireless through the Intel main site.
    I downloaded the driver and while trying to install it there is two exe. files there
    *1- dpinst32.exe*
    *2- iProDifx.exe*
    My question is: Which one to install from the above? And if both which one first pls?
    Thank you

    Hi!
    Is there no setup.exe or install.exe?
    But I think you must start the dpinst32.exe file.
    You can also install the driver manually. Go to the device manager => right click on the WLAN card => update driver
    Bye

  • Intel Pro Wireless misbehaving - very slow internet

    I have a problem with the Intel Pro Wireless card in my T60.  When I try to use the internet, it is incredibly slow (about 9 kbps download), even though I have broadband.  I have found a temporary fix for the problem.  In Device Manager, under the Intel Pro driver properties, I noticed that the power management for the wireless card is all the way down.  By increasing the power, my internet problem is fixed.  However, every time I restart the computer, the same thing happens again.  How can I fix this long term?

    I have a problem with the Intel Pro Wireless card in my T60.  When I try to use the internet, it is incredibly slow (about 9 kbps download), even though I have broadband.  I have found a temporary fix for the problem.  In Device Manager, under the Intel Pro driver properties, I noticed that the power management for the wireless card is all the way down.  By increasing the power, my internet problem is fixed.  However, every time I restart the computer, the same thing happens again.  How can I fix this long term?

  • T41 Intel Pro/Wireless 2100

     IPCONFIG reports that our T41 machine's wireless adapters are disconnected. Yet, the Intel Pro/wireless 2100 detects networks but fails to communicate and receive IP addresses.  Intel reports no longer supporting the cards or providing driver updates, which implicates either a WINXP update or an update to our wireless network.  Are there any Intel Pro/wireless 2100 drivers and/or WINXP communiations updates/patches that will permit the T41 to communicate and receive an IP address from the newer faster networks? 
    Solved!
    Go to Solution.

    Welcome to the forum!
    I would strongly suggest upgrading to a newer card, such as Intel 2200BG, Intel 2915ABG or IBM/Atheros b/g or a/b/g
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Intel pro wireless card can not connect

    Since some weeks, i can not use my wireless network, it does not associate the access point.
    The cared is a intel pro, using the agn driver.
    I can not connect to my wep key protected home network, or public, unprotected accesspoints.
    I tried various parameters with iwconfig, without success, so I assume the kernel module is broken.
    Any help would be appreciated.

    B wrote:
    sredna wrote:Yes, I read the wiki page. Yes, everything is installed. It worked for a long time. I read the various manuals. I do it the correct, recomended way. It just does not work.
    Rather than blaming devs for putting out faulty software, if I were you I'd look at myself - the PEBKAC problem . So an upgrade broke it. When was this? What packages where upgraded? Check your pacman log (yes, it exists).
    You are aware the module name for Intel's wireless cards changed? Instead of referring to the card model it's now iwlcore and iwlagn. But then again, if you let udev figure it out, there shouldn't be the slightest problem in that upgrade.
    Care to share any of your cherished errors? Without them there's not much we can do. The BBS has been out of crystal bowls for a long time.
    Dear mr. B, I do not blame anybody anything. I report, as is, it does not work. On my system, in the hope that someone have something meaningful to say, not because I hoped for you to call me names. I do not know what your acronym means, and I do not wish to find out, since it appearently is there to make me less. I do not care for that.
    The kernel modules that are loaded on my system, and was back when I had working wifi support, are iwlcore and iwlagn. I do not know that the iwlwifi-4965-ucode package is used for anything, I installed it because the before-mentioned wiki page recommends that, and I did get working support. I do not try to configure it by hand, I trust udev/hal/whatever is there to handle the hardware.
    But, sorry for repeating, since some time, I can not connect to an access point. No matter if I try cli commands or use wicd or networkmanager applets. The result appears to be the same, there is no error from iwconfig, which does not succeed.
    I can't even remember the date it went wrong, but i know that the kernel was updated as a part of that particular update. rolling back the kernel did not help though.

  • After Intel Pro Wireless 2200 BG software/driver upgrade cant authenticate to WRT310N

    I was having connection issues (solid connection at first then weak to poor connection downloads on the internet started good but degraded - after reading the forums here it seems likely heat related as router is very HOT), so I decided to try upgrading the Intel Pro 2200 BG software for the driver and program.  Upgrade was to version 12.0.4.0 version and driver was upgraded to 9.0.4.39 version.  Now when I try to connect to the WRT310N router via the Intel software it cant get past the authentication (I use WPA2 - Personal (AES-CCMP) ), the message I see is "Authentication process to connect to the network has not started".  Even completely removed the Intel software and reinstalled no dice, can connect to other non secure routers, just cant get my connection to work.
    Now the odd thing is that I can connect no problem with the Windows Wireless manager but not with the Intel software.  I know I could just use the Windows but kind of got use to the Intel and like that better.  Passphrase is correct, so I dont know what the heck is causing this.  Any ideas?  Anyone having the same issue?

    OK last update, tried again when I got home nada, got Windows Wireless connection setup and connected fine.  Prior to that I took off all the wireless security from the router and the Intel connected fine with no security (actually restored router to default as well) soon as I enable WPA TPIK Intel cant connect.  I wonder if somehow it got corrupted and cant relay the passphrase correctly for some reason.
    The other odd thing that I see is when trying to repair the Intel softward (add/remove, click on proggy and select "repair") it tries to repair but then stops as it cannot locate the Intel PROSet Wireless.msi file and I searched my entire HDD and cant find the file so I am just ripping the whole program out and going to stick with the Windows Wireless manager for now.

  • Unable to autoconnect to Wifi network after installing Windows update 8.1 - Toshiba Satellite - Intel Pro/Wireless 3945ABG-netwerkverbinding

    Hello, got a problem connecting to my wifi: every time I start up my Laptop (5 year old Toshiba Satellite L300) the wificonnections are listed but windows is unable to connect to the WIFI. Wificonnection states unable to connect, after running Windows Network
    Control the issue is found en the WIFI connects correctly. 
    I need to run the troubleshooter every time after staring up windows in order to get my wifi running, this is rather annoying..
    Does anybody have a solution? I downloaded and installed the latest driver from intel, and also tried to enter below without any improvement.
    netsh winsock reset catalog (reset winsock entries)
    netsh int ip reset reset.log hit (reset TCP/IP stack)
     see below error report:

    Hi,
    With the google translate, It seems that you are facing with the following problem:
    A network cable is not connected correctly or may be damaged
    Problem with wireless adapter or access point
    For this issue, I suggest you try the following steps:
    Try with another account, or test with another system, another cable.
    Reinstall network adapter.
    Open  Device Manager then Network Adaptors, find the wireless NIC and choose properties then open the power management tab and uncheck the one that says "Allow the computer to turn off this device to save power".
    Test this issue in safe mode with networking
    Windows Startup Settings (including safe mode)
    http://windows.microsoft.com/en-IN/windows-8/windows-startup-settings-including-safe-mode
    Does this work? and I would be appreciate if you could update the diagnostics with English.
    Regards,
    Yolandac

  • Intel Pro wireless 3945ABG and WPA 2 Question

    I see that Intel says this adapter is compatible with WPA2 but I can only find WPA support in the Lenovo driver download.  Without WPA2 AES I can't connect this laptop to many of the newer N wireless routers.  Has anyone found a driver that support WPA 2?
    Solved!
    Go to Solution.

    Welcome to the forum!
    I'm not sure I quite understand your dilemma...any Lenovo driver for this card will enable the type of encryption that you're looking for...typing this on a X60s with the exact same card and connected to the WPA-PSK network...
    I'm using Windows to configure my networks, not Access Connections.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Intel Pro Wireless 3945 (ipw3945) and Kernel 2.6.17.1

    Hi
    I get these message with my Intel Wireless card, what is the reason with?
    [flo@tpad ~]$ iwconfig
    lo no wireless extensions.
    eth0 no wireless extensions.
    eth1 no wireless extensions.
    Warning: Driver for device eth2 has been compiled with version 20
    of Wireless Extension, while this program supports up to version 19.
    Some things may be broken...
    eth2 unassociated ESSID:off/any
    Mode:Managed Frequency=nan kHz Access Point: 00:00:00:00:00:00
    Bit Rate:0 kb/s Tx-Power:16 dBm
    Retry limit:15 RTS thr:off Fragment thr:off
    Power Management:off
    Link Quality:0 Signal level:0 Noise level:0
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:88 Missed beacon:0
    sit0 no wireless extensions.

    Unless you're using wpa, then you might need the new version.  ipw2200 and madwifi seem to anyway.  Sync your abs and edit the pkgbuild for base/wireless_tools.  Delete every instance of pre9, run makepkg, and install.  Hopefully the devs will update the package soon in the repos.
    andy

  • Windows 7 Driver for Intel(R) PRO/Wireless 2200BG

    Hi,
    I've upgraded my MotionComputing LE1600 Tablet from Vista Business to Windows 7. A relatively seemless process and a more efficient OS. However, I need the Intel(R) PRO/Wireless 2200BG driver for my WiFi card or maybe even a generic one? Anyway have a suggestions?
    Thanks,
    j

    I have a DELL Lattitude D830 with the Intel PRO/Wireless 4965AGN. I upgraded from Vista Business 32bit and all of the netwrok connections (wired and wireless) went out. The wireless told me I had an invalid IP configuration and that I could connect locally, but not internet. Looked like a DHCP issue - couldn't get a valid IP configuration, coudn't specify static IP information.
    I tried *everything* to get the network to work. Luckily, I stumbled across this post. If you aren't familiar with it (I wasn't), in order to install in Vista Compatibility mode, right-click on the .msi and choose "Troubleshoot Compatibility", then choose Vista from the list of OSs. I DID get the latest drivers, both from Dell and Intel (The one that I installed was from Dell, haven't tried the Intel version which is slightly newer under this process). You may have to get the newest version to get it working - not sure.
    Mike

  • Wireless protection

    Hi all
    I recently install Network magic on my Vista 64 based computer,this software work great.
    My question is i want to set a wireless protection from the tap -status center,the software ask me for the" router user name"and "password"
    Where i can find those 
    My router is Linksys Cisco WRT54G2 V1
    Thanks 

    Hi, the default username and password for your router is admin.  I highly recommend changing the password if you have not already.
    Message Edited by AugieD369 on 09-18-2009 06:38 AM
    My Cisco Network Magic Configuration:
    Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
    Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
    Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
    Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
    Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

  • Problems reinstalling Intel ProSet Wireless software

    My wife's T42 (2373-5TU) has somehow gotten into a state in which the WIFI adapter (Intel 2200BG) software doesn't work with WPA2-AES authentication.  I tried reinstalling using the latest-and-greatest drivers (6hwc05ww) from the Lenovo site.  However, the installation program produces a popup error message "Intel Wireless Management Service has encountered a problem and needs to close."  This message also occurs when I try to use the adapter.  Also, after reboot there's another popup window about an application error in S24EvMon.exe, which I think is related.
    I have tried uninstalling the Intel software, but I get the same failure during the uninstall process.
    At this point, the T42 works properly with unauthenticated networks, but I need to use WPA2-AES, and that doesn't work.
    I also tried an earlier driver version: 1ywc54ww.  It refused to install because "A newer version of the Intel Pro/Wireless Network Connection driver is installed on this system."

    Some more details: this is an XP system with service pack 3. 
    I upgraded Access Connections to version 5.33, but it doesn't seem to be able to work with the WIFI card.  In the "advanced" mode, it says "status not connected" and "help me fix this" says "incorrectly installed wireless driver or protocol" with an error code of 039.  But if I configure Windows to control the card, I can connect to various open networks.
    I checked, and the "Wireless Zero Configuration" service is started.

  • Intel 2200BG Wireless problem

    I've been doing some maintenance and updating on a friends laptop and just updated a driver from the Intel site for their Intel Pro Wireless 2200BG Wireless adapter.
    (Set to channel 2, using WPA-PSK encryption - working fine before the update) After installing it - the wireless won't connect to my Homehub v1 6.2.6.E
    The adapter is working fine and seeing various networks with good signal strength. They also have a HH at home, also v1 - I haven't tried that one yet.
    My other devices work fine on the wifi. I rebooted both hub and computer. The adapter can see several networks - I tried turning off the windows firewall - that didn't make any difference.
    It tries to connect but never acquires a network address. Device manager reports no problems or conflicts. Intel (R) Pro wireless 2200BG Intel - 19.12.2007 9.0.4.39 - w29n515s.dll 9.0.4.95 - netwc32.dll 9.0.4.95 netwr32.dll I've checked the various settings, and tried setting it to connect via 802.11b only instead of g I don't know about the various other settings.
    Anyone any ideas? The machine has a non connected ethernet adapter, and a mysterious other adapter Anyone any ideas? Otherwise I have just messed up my friends wireless connection. I'm fairly sure the adapter is working fine, it is just not connecting with the hub which makes me think there are some defaults that have changed. I see a fair bit about these 2200BG Wireless adapters and BT Homehub wifie problems in google - but not sure if it applies as the 2200BG was working before the driver "update".
    My broadband secrets and tips

    Okay I've given up with the Intel 2200BG- I've jumped through all the hoops I can think of - uninstalled the adapter replaced the original manufacturers old drivers, uninstalled again, updated with Intel drivers from last year, tried on an unencrypted HHub network. Anyone recommend a replacement internal WiFi adapter for the Intel 2200BG Mini PCI to go in a Hi-Grade Green 553 Notebook? I've also tried running the hub and adapter  in the b mode only, with the hub also only running in b mode.
    It can detect all the networks and the software all works fine, it it can not connect. No matter WHAT I do.
    Must be compatible with Win XP Home, the Hi Grade laptop and the BTHomeHub v1- and come with compatible drivers.
    They look to be reasonably priced, and I'd rather get some friendly supportive peer to peer advice here before trusting myself to PCNurld.
    If the worst comes to the worst I could always get a usb wifi adapter and forget the internal interface.
    Again - thanks for any help
    My broadband secrets and tips

  • No WPA2 encryption option for Intel 2200BG wireless on T42 w XP SP3

    Hi, trying to upgrade my wireless network to WPA2 so i can use the higher 802.11n speeds for my new T500 so I want to upgrade my T42 now on WPA to WPA2. (Yes I realize my T42 needs to be turned off from the wireless network before I can get the higher speed for my T500 but I still want to have both machines set up for WPA2 so I don't need to change any options in Acess Connections before using the T500 on wireless.)
    On my T42 I have upgraded to the latest Intel PRO/Wireless driver 12.01.1000 dated Jan 5 2009. I have latest Access Connection 5.12. When trying to install Microsoft patch KB893357 it responds that it is no longer needed on latest release (I am on XP SP3.)
    Setting my DIR-655 Dlink router to WPA2 only I can access it with my T500  with encryption set in Access Connection to WPA and AES. I can't access the network from my T42 with these settings. (Dropping the router down to WPA and setting encryption on the T42 to WPA and TKIP works.)
    What can I do to achieve WPA2 encryption on my T42?
    Message Edited by zilla on 2009-02-08 08:40 PM
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

    Googling on WPA2 and SP3 there seems to be quite a few people who lost their WPA2 ability as they installed SP3 on XP. Did anybody here find a solution for their WPA2 SP3 problems?
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

Maybe you are looking for