Intel(R) USB 3.0 Root Hub, not installed

Dear Sir, I am Recently purchage HP HP 15-r264TU, tried to instal drivers for windows 7 64 bit OS, its not installed properly and also not ditect pendrive. it showing some worning mark at Intel(R) USB 3.0 Root Hub, i want your help to salve this problem. i am eagerly waiting for your valuable reply. Thanking you:Beeresha R s

Hi: Download, unzip and run the setup.exe file from the link below... https://downloadcenter.intel.com/download/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Controller-Driver-for-Intel-8-9-Series-and-C220-C610-Chipset-Family

Similar Messages

Power management issue USB 2.0 Root Hub

82801EB USB 2 Enhanced host controller .
USB 2.0 Root Hub
Power management issue.
The check box of the Function (Allow the computer to turn off this device to save power) Remains always unchecked , it does not matter if you check it , in the next check in the properties window it will be unchecked again .
My problem is that my system does not hibernate if I set time more than 15 minutes or so.
The system stays-On for ever, I have check for software issues, but everything looks normal, at my search for power management problems in drivers, I found this issue, with the USB 2 controller.
I have unplug any USB device from it, and the power management status does not change also.
The INTEL driver file is very fresh, 29/4/2004.
Does any one have any ideas, Beta driver or other solution?

Well i think that i found my real problem , even if the above issue is not 100% responsible for my troubles .
The AVAST antivirus was blocking the hibernation , by one function called as ( On acces file check ) .
I did disable it , and my system now hibernates .
The point is that even now , i am not 100% certen that the system will act corectly its and every time .
But at list i did a good step on the corect direction.

T410 System Update 4 - Intel Rapid Storage AHCI Driver "Package did not install" Error

I've not had a problem with system Update 4 until today. I went out to check for any updates and there was only one (Optional) listed so I went ahead and tried to install it.
It is Intel Rapid Storage AHCI Driver for Windows 64bit. The installed version is 9.5.7.1002 and the version trying to be installed is 9.6.0.1014. The progress bar indicated it downloaded and tried to install, but ended with the error, "1 Package did not install." Not a lot of help in that statement!?!
Has anyone had a problem like this before? Any idea how to "fix" it so I can install this update?
I even tried once with MS Security Essentials, Windows Firewall and UAC turned off with no difference.
System details are in my sig, below.
Thanks for any help,
Gary A.
ThinkPad T410 | ThinkCentre M83
Solved!
Go to Solution.

Yup, that's what I ended up doing - download and install the standalone file. Installed just fine
Gary A.
ThinkPad T410 | ThinkCentre M83

NI-IMAQ for USB 1.1.1 will not install with LV8 and Vision 8.0 or 8.21

When I try to install NI-IMAQ for USB 1.1.1 I get a message that vision 7.1 or higher with Labview 7.0 or higher; or Vision Assistant 7.1 or higher is required, I have tried the vision 8.0 and vision 8.2.1 packs with Labview 8.0 with no success.

Hello mcg,
I am not familiar with NI-IMAQ for USB 1.1.1. The newest version I know of that we have is 1.0 at the following link:
NI-IMAQ for USB Cameras 1.0
You are correct that you need LabVIEW 8.0 and Vision 8.0 installed. After this you should be able to install this very simply. If that's still giving you trouble, try repairing LabVIEW and repairing Vision (Start » Control Panel » Add or Remove Programs » National Instruments Software » LabVIEW or Vision » Repair).
Please let us know if you have any more trouble on this. Please post a screenshot of the error as well.
Regards,
Luke H

T540p (20BE) Intel HD 4600 Lenovo Version drivers will not install. (Fix provided)

Hi all.
I figured I would post this issue. I recently did (another) re-install of my Windows 7 Professional OS from a Windows OEM DVD. I noticed that when I attempted to install the Intel HD 4600 Video Graphics drivers from the Lenovo site, I got an error saying "This computer does not meet the minimum requirements for installing the software." I have the dual-video graphics system (Intel HD 4600 & NVIDIA GeForce 730M) T540p Lenovo package. In order to install the NVIDIA mobile chipset drivers, you must first install the Intel drivers which fails to run.
Resolution: Download and install the Intel HD 4600 drivers from Intel's website, install, and reboot. Once installed the NVIDIA drivers can then be installed.
Hope this saves people some headaches in the future.
Thanks.
Certified Computer Support Technician
EMC VNX EMCIE, EMCTA, Isilon TA, NetBackup STS, CommVault Certified.
~ Jason Voyles

Ok, Gyz... since Lenovo driver team has hands grown from the arses.... they manage to forget adding proper HW id to the inf file provided in the recent drivers.
My sys has id : PCI\VEN_8086&DEV_0416&SUBSYS_221117AA&REV_06
Thats what I did:
1) Downloaded recent drivers from lenovo (sfx exe).
2) Ran it and got error "your system is not ... something"
3) At this point it made folder with intel crap on c:\drivers\video\
4) I edited c:\drivers\video\graphics\ki103976.inf by adding tis line:
%iHSWGT2UT% = iHSWM_w7, PCI\VEN_8086&DEV_0416&SUBSYS_221117AA
Just find simular hw id string under "; HSW Classic" and add.
Then I ran setup exectutable and have my updates. This works for win7 x64. If u need fix for win8, go your windows/inf directory and find oem92.inf, then you can find your hw id string and add it in same manner to the proper section of the inf.
Lenovo T540p / Z570 / Y50-70 / S10-3

USB Keyboard with trackpoint: mouse not installing...

Hi everyone
My new external keyboard seems to install ok (and works) but the mouse (trackpoint) doesn't. Under in control panel under mouse the USB trackpoint comes up and I can play with the settings but it has no effect.
Cannot install the mouse (trackpoint), "a service installation section in this INF is invalid". When I've tried re-installing the drivers it says that it isn't compatible with XP.
I'm running a thinkpad sl500 on XP.
I've tried the newest drivers I could find (2006) on the lenovo website.
Can someone please help?
Justin

I fixed it by randomly installing a different driver.

MSI KT3 Ultra 2/Win 98SE/ USB Root Hub

Please, could someone help me to understand if I have the correct installation of drivers for USB
for Win 98SE?
Having installed the USB 2.0 driver from the M/B disk
Under Device Manger > Universal Serial Bus Controller,
I have the following entries:
1x USB 2.0 Root Hub
3x USB Root Hub
1x Via PCI to USB enhanced Host Controller
3x Via Tech 3038 PCI to USB Universal Host Controller
My M/B Bios version is 5.5 and I have enabled all USB ports (6) in the Bios.

Hi,
You don't need to connect USBOC....
As for the other pins, you have to rewire them....
Take an Ohm-meter and measure them against a normal USB connector.....
Don't connect it just like that......

USB 3.0 host controller and USB Root Hub xHCI not showing up on Windows 8.1 laptop

Greetings and thank you for taking the time to read the following message and 'maybe' attempt to help me with my current plight...
I have an HP envy m6 laptop running Windows 8.1 and Windows 7. The problem i am facing at current is that i have only 1 out of 4 usb ports working on my Windows 8.1 partition however on my Server 2012 partition, all four ports are working fine. After asking
around i have come to the conclusion that i'm having a driver issue. I compared what was present on the Windows 7 USB controllers (in Device Manager) to what was present on the Windows 8.1 controllers and i found that my Intel(R) USB 3.0 extensible host controller
- 0100 (Microsoft) and my USB Root Hub (xHCI) was missing on my Windows 8.1 partition.
Now for some background....the problem first occurred when i was trying to solve an external hard drive issue in which none of my external hard drives where showing up when i plugged them into my usb ports, i came across an online solution telling me to
uninstall all my USB drivers in device manager, restart the laptop and let the computer re install the drivers automatically, the result was that i only had 1 out of 4 ports working. Could someone please point me in the right direction in order to fix this
problem?

Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station.

Re: Usb Root Hub Message

Hi
i am doing some researching for my friend who has a laptop, model no
Toshiba Satelite A200 System Uni
Model No. PSAF0A-02L0K
He recently has purchased a wireless internet usb stick
when he connect this through the USB ports, he gets an USB Root Hub message and informs him that this product can work faster
We are unable to source what the problem is and rectify this issue as his internet is working very slow
Any help would be greatly appreciated

Sounds like its running in USB 1.1 mode.
Possible reasons could be:
1) There is anothe rUSB 1.1 device plugged in that is causing the 3G USB device to run slower.
2) There is a conflicting USB driver installed, such as a printer driver or USB Storage driver, or camera driver.
3) The Intel Chipset drivers are incorrect or not installed properly.
Does it happen on all the USB ports?

USB Root Hub (xHCI) in windows 8.1

After install windows 8.1 for 5 months, I find out that there are 2 problems in my PC.
1) USB3.0 does not work anymore. In device manager, it says that the drivers for this device are not installed. (code 28). I try to update driver, windows could not find driver software for my device.
On hardware IDs:
USB\ROOT_HUB30&VID8086&PID8C31&REV0005
USB\ROOT_HUB30&VID8086&PID8C31
USB\ROOT_HUB30
2)Error in Bluetooth (Broadcom 43142 Bluetooth 4.0 Adapter): This device is not configured correctly. (Code1)
While I try to update driver software BCM43142A0:
Windows found driver software for my device but encountered an error while attempting to install it. This device is not configured correctly. (Code1)
Thank you for any help.

DR05 wrote:
After install windows 8.1 for 5 months, I find out that there are 2 problems in my PC.
1) USB3.0 does not work anymore. In device manager, it says that the drivers for this device are not installed. (code 28). I try to update driver, windows could not find driver software for my device.
On hardware IDs:
USB\ROOT_HUB30&VID8086&PID8C31&REV0005
USB\ROOT_HUB30&VID8086&PID8C31
USB\ROOT_HUB30
Your desktop needs drivers for an AMD usb 3.0 device. You have provided the hardware ids PCI\VEN codes for the Intel usb 2.0 hub.
2)Error in Bluetooth (Broadcom 43142 Bluetooth 4.0 Adapter): This device is not configured correctly. (Code1)
While I try to update driver software BCM43142A0:
Windows found driver software for my device but encountered an error while attempting to install it. This device is not configured correctly. (Code1)
Try the following driver
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-135105-1
If no joy with that one, try the Lenovo Windows 8.1 driver on the following web document.
http://support.lenovo.com/us/en/downloads/ds034049
Thank you for any help.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Audigy 2NX USB Root Hub Prob

Hopefully someone here will have some suggestions to help resolve my issue.
I have fi've USB Root Hubs on my computer; the USB system is 2.0
Only two of those hubs are in use. One hosts my Canon scanner.
The other hosts every other USB device on my system.
That in itself is an issue, but because not all of my USB devices are in use simultaneously, it hasn't previously been an issue.
Now, however, it has become one.
Both my Audigy 2NX and a four-port self-powered USB 2.0 hub are on one USB Root Hub. The four port hub has my two printers connected to it.
The issue is that when I use my laserjet printer, it disables the Audigy 2NX. The Audigy normally comes back up after the printer has gone back into sleep mode.
However, if I am playing a game when the printer is used (I share it on a wireless home network) it disables the Audigy and it can only be brought back up by restarting the computer.
I think it is one of two issues;
. The four port hub with the printers on it cannot share a root hub with the Audigy 2NX; when the laserjet comes out of sleep mode, it uses all of the bandwidth on that root hub and disconnects the Audigy.
2. A recent driver update to the Audigy is conflicting somehow with the printer.
I might also be tempted to think it was a power supply issue if I didn't have a robust 650 watt PSU on my system.
To try to get the two devices on separate root hubs, I turned off my computer and disconnected all of my USB devices. Then I connected one at a time, powering down in between connections.
The device assignment remained the same.
My next step is to uninstall the Audigy 2NX completely from my system, and then re-install from the base drivers.
My question is; does anyone know how to force devices to install to a specific and/or different root hub outside of their physical connection? An .ini edit or perhaps a driver edit's
Thanks in advance for any help.

I have an Audigy 2 NX myself, and I found it works best off of a direct root usb port (not off a hub). The problem is that on most computers 2 USB ports share hub. Which is why you are having that comflict.
My conflict doesn't happen there, it was on the mouse at first, now it's on an external IDE Adapter i'm using.
All I do is unplug the IDE adaptor when it stops working, waiting a few seconds, then plugging it back in.
So what I suggest is to do like I did, and switch what ports things are plugged into until it's something that can plug & unplug with no real issues.
Why this happens, in opinion, is that there just isn't enough power getting to all the usb ports when there's alot of stuff plugged into them. My limit seems to be 7 items, even though most of them are lower power stuff, mouse, joysticks. I do have a 3.5" hd in a case, which is self powered, and the ide adaptor which is self powered, and the audigy 2 nx, which is, as you know, self powered. I can plug another item in, but anymore after that will knock my ide adaptor. and i still have usb ports i'm not even using. oh, the joysticks are on a hub which is where I usually plug another item in, either my mp3 player or thumbdri've.
I think it most likely an electric problem, and that it only affects people with faulty usb componets or something. I haven't heard of it being widespread or specific chipset/usb controller problem. Can't think of anything else it could be, but i'm not an electrition.
Sorry i could be of much help, but maybe you can at least make it less of a bother to deal with.
good luck

Bluetooth USB Root Hub Conflict

Hi,
New to the forum.
I have a Lenovo T400, running Windows XP SP2.
I am getting recurring dialog:
USB Device not Recognized
USB Root Hub (2 ports)
- Unknown device
- Thinkpad Bluetooth with Enhanced Data Rate II
I've installed the latest Lenovo Bluetooth drivers, and followed some of the suggestions I found on the web like deleting all USB devices while logged in in safe mode.
Any pointers would be *greatly* appreciated!

Try installing this http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-69996

V200 PROBLEM - USB ROOT HUB (2 POR

hey everybody.
i have one problem - i can't connect my v200 to computer - i mean when i wawt to do this to copy some files i have notice: ' usb device bot recognized - one od the usb devices attached to this computer has malfunctioned, and windows does not recognize it' and a notice USB ROOT HUB (2 PORTS). i have this problem since my sister rebooted computer with connected v200
thx for help - and sorry for my mistakes in english

i have forgotten that after my sister had rebooted computer with connected v200 i can't use it as a radio or mp3 player as well (after long pushing the play button nothing has happening)

My USB hub driver is not installing on my macbook pro windows 7 partition ?

hey there, my USB hub driver is not installing on my macbook pro windows 7 partition .. any clue?

yes am talking about windows 7 on my mac pro ... i did the following troubleshooting steps but no use and still the device is not recognized.
       - i changed the usb port .
       - i changed the hub it self .
     - i seaarched online for the driver automatically
        - i searched online for the driver manually ie. hardware id ..
         - i checked the connections,,
anything else should i do ??

My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please.

My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please?

It can be the bridge. It could need firmware update. or the FW ports may be an issue. LaCie seemed to invent the phrase/tip 'resetting firewire ports' due to the issues with their drive cases.
You can try an SMC Reset.
So far I have avoided name-brand and tend to see them mentioned. Often with a new OS (though you are on 10.6.8, but when 10.6 came out there was a common complaint and thread of users: FW or USB worked but not the other interface).

Intel(R) USB 3.0 Root Hub, not installed

Similar Messages

Maybe you are looking for