Intel Rapid Start Technology does not appear to be installed

How do I get rid of this message?
It's an HP Envy dv7 Notebook, D0X38EA#ABU
I haven't upgraded any part of the hardware - it's configured as it came out of the box. It's running Win 8.1
I have looked through the forum and downloaded manuals and it all gets extremely technical very quickly. So I downloaded a driver from intel and it says "This computer does not meet the minimum requirements for installing the software".
I am just a simple user. I can guess that the Intel thing will make the computer boot faster. That would be nice but I'm not qualified to start faffing around in the BIOS. Nor do I want to be.
Please just tell me how to make the message go away. It's annoying.
This question was solved.
View Solution.

Hello @Gatasblancas,
Welcome to the HP support Forums. I completely understand your issue and your reluctance to go into the BIOS. If you dont feel comfortable doing it then by all means stay out. Thank you for providing your system information as well. Now there is only one way of dealing with this and it does require going into the BIOS. Here is a link that can walk you through the steps needed.
Intel Rapid Start Technology.
Now you may have not upgraded or changed anything it may have been caused by an update that ran automaticaly.
If you can not work through this with the link I posted for you. I would contact phone support to walk you through this.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Phone support by Region.
I hope this helps.
Thank you for posting.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Similar Messages

Lenovo IdeaPad U310 Intel Rapid Start Technology with WIndows 7 Ultimate

Hello,
I have upgraded my Windows 7 Home Premium to Ultimate. Got it in my domain and everything seems normal . But I wanted to check the options of that energy saving settings and can't find any information about, when does my computer go to hibernate. He does use the stand by, but for how long? Until the battery is low? That makes no sense.
The computer must go in hibernate or is this with ultrabooks going other ways?

Hi
I have further investigated and found a solution for hibernation
In order to enable hibernate in Lenovo Machines SSD support models, you will need to restart and Enter into the BIOS Setting
1. Press Fn+ F2 to enter BIOS
2. Choose "Configuration > SATA controller working mode" as "RAID";
3. Select "Configuration>Intel Rapid Start Technology", choose " iRST Support" and "Entry on S3 critical battery event" as "Disable";
. It will then automatically return to an available Windows power options setting. However, iRST (Intel Rapid Start Technology) does not have the ability to wake a system from hibernate.
Now restart the system and you will find hibernation option is enabled under power option
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Yoga 13 Intel Rapid Start technology

Hi,
I've just got a Yoga 13 and on every time that I'm turn it on I'm getting an ERROR
"Your system does not appear to have Intel rapid start technology enable"
1.i didn't see a "Intel rapid start" in the bios
2. I've update my bios
3. When I've try reinstall the driver I got this error "this computer does not meet the min requirements for installing the software"
I need help.
tnx.
Solved!
Go to Solution.

hi O_hei,
If you're running on the 66cn52ww BIOS or above, I'm afraid the BIOS is limitting you from enabling the Intel Rapid Start Technology feature. For now, try to uninstall the Intel Rapid Start Technology under Control Panel (large icon view) > Programs and Features to get rid of the "Your system does not appear to have Intel rapid start technology enable" error on startup.
Upon checking, the Yoga 13 here in the lab runs on the 66cn51ww BIOS and has the Intel Rapid Start Technology feature.
Spoiler (Highlight to read)
I recommend you visit the lenovo website once an updated BIOS is released that enable this feature.
Best regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Intel Rapid Start Technology - Error Message upon start-up

I have a fairly new Lenovo U310 that has been nothing but problems since I purchased it. Recently, it has been taking a long time to start up and when it finally hits the desktop, an error message pops up that says "Your system does not appear to have Intel Rapid Start Technology enabled." I hit 'OK' but there's not apparent way to fix this problem. I've tried downloading the IRST drivers from Intel, but trying to install them give me the error message saying that my system can't support the item. Help?

I'm afraid I don't know the layout of the BIOS options on Ideapads, only on Thinkpads - with the latter it is on something like the third screen of options and it is clearly labelled as Intel RapidStart.

How to use Intel Rapid Start technology on my ThinkPad Edge 531 computer?

I have a Thinkpad Edge 531 (model 6885-73G) preloaded with Windows 7 64bit. According to the appropriate user guide (see Thinkpad E531 User Guide - page 108) and chipset specifications Mobile Intel® HM77 Express this ThinkPad model supports Intel Rapid Start Technology with a special partition on the SSD M.2.Such an SSD with the specification M.2 (see MyDigitalSSD Super Cache 2) I bought it and installed successfully on my ThinkPad, which can run a cache software FNet HybriDisk on.
However, even if I proceed exactly according to the installation script by Intel, see (Intel Rapid Start Technology User Guide) or by the installation script by Lenovo community, (see Edge E330 and Intel Rapid Start), I can not put into operation Intel Rapid Start Technology on my ThinkPad, although I use the installed SSD disk with an alone partition of appropriate type (with ID type 84 on MBR) with more allocated space than the size of RAM for my ThinkPad and with the currently deployed version of BIOS (1.29) and current drivers, such is Intel (R) Rapid Storage Technology Driver version 11.1.5.1001 downloaded from the webiste of Lenovo support for this model ThinkPad Edge 531.
Since, in my opinion, based on the above specifications declared by the manufacturer Lenovo and Intel, this ThinkPad model should support Intel Rapid Start Technology, I would like therefore to know how this technology on my ThinkPad to put into operation, because of which I also bought this ThinkPad model. Does exist for this model ThinkPad Edge 531 some specific deployment scenario of Intel Rapid Start Technology? Does anyone have any practical experience with the launch of this technology on those ThinkPad models? Can it be expected that the full support of Intel Rapid Start Technology for the ThinkPad Edge 531 will occur after the release of a new version of the BIOS or a new version of Solid State Drive Firmware Update Utility with support for MyDigitalSSD Super Cache 2 published on the website of Lenovo support?
Thanks in advance for any advice and guidance with the launch of Intel Rapid Start Technology on my ThinkPad Edge 531.

Hi @nmulji ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY TouchSmart 15t-j000 Notebook and issues with Raid technology. Here is a link that helps with the driver for your Notebook.
You might need this update for software and drivers with the Intel Management Engine Interface.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. If something is not updated this could be causing an issue.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

U410 Intel Rapid Start Technology Driver - failure

For about the last two weeks (for some unknown reason) Intel Rapid Start Technology is unable to start on my U410 Laptop. I attempted to reinstall the driver from the Lenovo page, but when I get to the install point I get a message stating my device does not meet the minimum specifications for this technology!
It's making start ups and logging on a major drag
Has anyone experienced this before? Any help would be appreciated.
Thank you,
Rory

Never found a way to fix it. Me and my friends are pretty proficient with computers too. Just been shutting down my computer every time I'm done using it. Lenovo said we can send it to them and they'll take a look or replace under warranty

Intel Rapid Start Technology | MSI Z87-G45 Gaming Motherboard

Are there any users at all that have Intel Rapid Start Technology fully functional; if so can those share their experiences?

Quote from: dude on 16-March-14, 22:27:39
I use it because I have a Crucial M4 SSD. It performs better with the intel
I was referring to intel rapid Storage Technology. I will drink more coffee before posting again
Finished with that cooffee
Iam also having thoughts about this, any information would be great.
Note! Iam not having problems but are curious about it.

Your system does not appear to have intel rapid start technology

I have a Lenovo U310 with windows 8 and wish I could take it back. Problem after problem with this computer, both hardware and software related. I started getting this message about the Intel rapid start a couple of days ago. I went into this forum and one of the specilists suggested going into BIOS and change the SATA controller working mode to RAID and to enable IRST which I did. Now the computer can not start. It tries to load and it says that the recovery system failed. I can get to the BIOS menu again but I wont let me get to configuration screen. Any help would be much appreciated. thanks
Solved!
Go to Solution.

hi yzarate,
I'm sorry to hear what happened,
If the system is giving you a failed to start Option, Restarting it May sometime give you option Like Safe mode,
If you're getting that, select that option and it should be able to start you system while in RAID then restart the system again once booted back up.
If you're not getting that message I would suggest go back to BIOS
go to the Exit TAB, Select Load optimized default or press F9 to load defaults, F10 to save and Exit and hit enter,
Try loading BIOS again and see if the configuration tab will be available,
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Y410p Cannot install Intel Rapid Start Technology

Hi Guys, I have a Y410p and I have replaced the HDD with a SSD on windows 8. Before changed to SSD, i did not try to install the intel rapid start and thus I never know if it could work before. I re-install Windows 8 on the SSD and also installed Intel Rapid Storage Technology driver. When I install the Intel Rapid Start, I got this error: "this computer does not meet the minimum requirements for installing this software" I have checked the BIOS, I cannot see any relevant settings and I just make sure AHCI enabled. I have done the parition (on the GPT) using the set ID = D3BFE2DE-3DAF-11DF-BA40-E3A556D89593 I have followed this guide (UEFI)http://download.intel.com/support/motherboards/desktop/sb/rapid_start_technology_user_guide_for_uefi1.pdf Is it Y410P cannot have the Intel Rapid Start installed because of the chipset or the BIOS? Do I miss anything? Please help. Thanks in advance.

Never found a way to fix it. Me and my friends are pretty proficient with computers too. Just been shutting down my computer every time I'm done using it. Lenovo said we can send it to them and they'll take a look or replace under warranty

Classic environment does not appear to be installed

By not installed I don't mean that OS 9 isn't installed, I have an OS 9 system folder on a seperate parition and I can start up the computer with it fine. What I mean by not installed is that the pref pane does not exist, and neither does "/System/Library/CoreServices/Classic Startup.app", or "/System/Library/Classic" and all the other files it uses. Whenever I try and start a classic app I get an error. "The operation could not be completed. An unexpected error Occured". How can I get Classic installed and working. Running OS X Server 10.4.11 on a PPC G4 Mac.

I've asked a moderator move your post to the correct forum. Note for future reference there is a Server Products Discussion on http://discussions.apple.com/ separate from Mac OS X & Related products.

When I turn on my computer the start button does not appear. Where did it go?

With no start button I cannot do anything.

This isn't a Firefox issue, it sounds more like a Windows problem. It's possible you set your taskbar to auto-hide, so try mousing down to the bottom of the screen, does your taskbar with the start button show? If so, right click it, click properties, then un-check "Auto-hide taskbar".
Aslo, you need to update your Firefox to a modern version: [[Update Firefox to the latest version]]

APP BAR ON START SCREEN DOES NOT APPEAR - SO I CANNOT NAME OR CREATE GROUP NAMES

HELLO, COULD SOMEONE TELL ME IF THEY KNOW OF THE FIX FOR MY APP BAR ISSUE? I AM TRYING TO CREATE GROUP NAMES FOR MY APPS. I HAVE THEM ORGANIZED, I CLICK THE LITTLE MINUS BUTTON AT THE BOTTOM RIGHT HAND CORNER (OR PINCH THEM TO DOWNSIZE) SO THE
APPS GET SMALL, BUT YET WHEN I RIGHT CLICK ON A GROUP TO GET THE APP BAR TO COME UP IT DOES NOTHING. I LEFT CLICK ON THE GROUP OF APPS AND THEY GO BACK TO NORMAL SIZE...ANY SUGGESTIONS?
THANKS!

Hi,
For this problem, you can try to use system restore to revert your system to a former normal time point for test:
How to refresh, reset, or restore your PC:
http://windows.microsoft.com/en-us/windows-8/restore-refresh-reset-pc
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Connection navigator does not appear in new install on Win XP

I am trying to install SQL Developer as part of a class project on a Win XP machine.
My problem
When I launch sqldeveloper.exe, the start page appears but not the connection navigator pane. I do not have Oracle installed. I am trying to connect with a MySQL database I installed using Xampp.
What I did
Originally I tried installing the SDK separately. I installed the latest version of Java SDK (jdk-7-windows-i586.exe) along with unzipping sqldeveloper-3.0.04.34-no-jre.zip in to my c:\programs\ directory. But when I launched sqldeveloper.exe, it complained that it could not use version 7.
So uninstalled Java 7 and downloaded and unzipped the file sqldeveloper-3.0.04.34.zip in the program files directory as directed by the install instructions. The down load includes the
SDK but it is not installed.
I am wondering If the program is not functioning correctly because javew is not correctly installed. Why do I not need to execute an installer for the java SDK included in the download?

Have you tried View | Connections ?
Java doesn't really need to be installed, the actual installer does very little.
To debug your problem, try running <sqldev>\sqldeveloper\bin\sqldeveloper.exe instead of the normal executable. That should leave a console open which may show additional errors which will help .
Incidentally, using SQLDeveloper for non-oracle databases is probably not the best way to go. Third-party database support is there mainly to support migration to oracle. If you are using Mysql, you would be better using the native mysql clients.
Edited by: Jim Smith on Sep 11, 2011 10:18 AM

Could not edit in photoshop. photoshop does not appear to be installed

V
When editing a menu in Encore this message appears.
How to solve?
My system is Windows 7 64Bit. Use the Encore and Photoshop CS6 CC.
Ao editar um menu no Encore esta mensagem aparece.
Como resolver?
Meu Sistema é Windows 7 64Bit. Uso o Encore CS6 e o Photoshop CC.

First I would check to see what software my system was using to automatically open .psd files. Sometimes when you install other programs they claim the right to open these files. Close down all open software. Go to Windows Explorer, find a .psd file, right click on it and choose properties, under type of file choose Change and then choose Photoshop to open the file and tick the box that says use all the time. Click okay. Hopefully that will prevent you from having to re-install anything. Peace, BJ

Issues with Intel Rapid Start in Lenovo U310

I have a lenovo U310 with 500 GB HDD and 24 GB SSD. Both drive are working fine. However, when I boot my computer and reach to the desktop, I receive the error saying Intel Rapid Start Technology is not enabled. When I checked the BIOS, the Partition type for iRST appears to be INVALID. Also, I tried to download and install the driver for iRST from the Lenovo website. It installed properly, but at the end it said install the driver and finish. When I hit the finish button, I received the error saying the minimum requirements are not met.
So, I have 24 GB SSD installed. But why am I getting the error and how to fix it?
Help will be very much appreciated

The B85 supports Intel Rapid Start Technology, see one of the user guides on intel site, but it needs BIOS support.
The B85M gaming don't have it on specs page but looking at it's manual it has rapid start settings in BIOS.

Intel Rapid Start Technology does not appear to be installed

Similar Messages

Maybe you are looking for