Intel rapid storage high cpu usage

i noticed that after upgrading to windows 10 the laptop was running kinda sluggish, so i looked around and saw that something called IAStorDataSvc (32 bit) uses between 25 to 30 percent of the cpu all the time. i tried opening intel rapid storage control center but it shows some error message, what can i do? can i just stop the process? or will that mess something up? thanks

I upgraded to Windows 10 this morning and get the same issue. Any idea what this does and how to fix it?

Similar Messages

Intel rapid storage high cpe usage

i noticed that after upgrading to windows 10 the laptop was running kinda sluggish, so i looked around and saw that something called IAStorDataSvc (32 bit) uses between 25 to 30 percent of the cpu all the time. i tried opening intel rapid storage control center but it shows some error message, what can i do? can i just stop the process? or will that mess something up? thanks

I upgraded to Windows 10 this morning and get the same issue. Any idea what this does and how to fix it?

High CPU usage - Rapid Battery Drain - Running HOT

Looking for help.. PLEASE!
Z10 - Model STL100-3 Software release 10.2.1.2179
Symptoms;
Occasionally, and for no apparent reason, I notice my Z10 getting hot in my pocket. I run the device monitor App and see a very high CPU usage, which consequently drains the batter very quickly.
I've tried all the solutions from every support group thread and blog. And I mean ALL!
Pulling the battery
Replaced the battery
Removed the SIM
Deleted G Mail
Removed all 3rd party Apps (2)
Stopped email sync
Stopped calendar sync
Turned off all radio
Turned Off Wi-Fi
Let it sit for hours, even days to let it finish doing whatever its trying to do
Etc Etc Etc.
Finally, I called BB support, they wanted $50 to talk to someone. I told them the issue, they said the device is bad and must be replaced. I said its software related!! They said.. no, its a hardware issue. Device is under warranty and they want me to just go get a new one. I don't want a new one, I want a fix! Stop the waste of BB $
Temporary solution
Eventually, I decided I would do a restore, back to the factory settings, and here's when I found something
I run BB Link, connect the device, do a back-up... and LOW AND BEHOLD.. this fixes the high CPU usage and the device runs great, very cool, low cpu and extremely long battery life.
Sadly! .. this problem reoccurs, after a few days, sometimes after a couple of weeks and just out of the blue.
I can force this fault to occur, simply by doing a restart of the device. Sure enough, it will run hot, use all the cpu and I will have to do a back-up to get it to settle down again. I've tried to wait for the so called 'indexing' to finish, but it never stops running with high cpu and doesn't help.
Can any one tell me whats happening and how to make this a permanent fix?
There are hundreds if not thousands of people having very similar issues, and many different methods to fix it. Its my belief that there is an underlying bigger problem that relates to all these differing fixes, but as yet.. I cant find it and none of these fixes work for me. For now... I will keep doing the occasional back-up and hope I get a response that can help.
Thanks to all that read this.

curve8530curve8330 wrote:
The heat may be normal. After a little water damage incident, which I repaired, I disassembled my Z10 the find a small heat sink will thermal compound. This helps dissipate heat efficiently. I found a large number of air bubbles and possibly a large air pocket by the way the paste stuck to both sides. I removed the old paste and replaced it with artic silver paste and the z10 has been much much cooler. It use to run about 105*f and now it is around 85*f.
See this thread I posted for before and after pictures using a thermal imager.
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-heating-up-fix/m-p/3031220#M71390
@Curve8530 .....as much a s your discovery is appreciated, I hardly believe that most people will actually dismantle their phone to remove the paste and replace with arctic silver. Besides, what you are doing is not a fix for the actual problem....
In most cases, this heat is associated with apps using the CPU resources beyond the normal limits.
As an easy fix, finding and removing the app(s) in question followed by a reboot, solves the issue. In some cases an OS reload is necessary.... but under no circumstances I would even remotely suggest to any member to dismantle their phone and do what you did...

SBS 2011 - High CPU usage - Help me Microsoft forums! You're my only hope!

My company supports a client that has a SBS 2011 server. For about the past year, we've been fighting a recurring issue with performance on this server. There are about ten local users and four remote users. The server's CPU idles at
about 60%-80% but is usally running when under *any* load from 80%-100%. If you do anything on the console, it will stay pretty much at 100%. These are not power users by any means. The server is utilized for file/printer sharing, Exchange
2010, and one flat file database application (non-SQL). SharePoint is not utilized.
Needless to say, our client is frustrated. When opening files, using their database application, or doing anything Exchange-related, there is a large amount of lag on the client side. First, here are the server's specs:
Make:Dell PowerEdge T420
OS: SBS 2011 Standard SP1
CPU: 2 - Intel Xeon E5-2407
Memory: 32GB
RAID: RAID 1 - Operating System (C:)/Data Volume (E:) | RAID 5 - Data Volume (D:)
Here is what we have tried to resolve this to finality:
* Doubled resources - Initially the server had a single physical processor and 16GB of memory. While these specs alone should have been fine, and were fine when the server was installed, we had periods of time where the server would just sit all day at
100% usage. We doubled the resources and while this seemed like it would fix the issue, we are still seeing abnormally high processor usage.
* Removed all monitoring tools, antivirus, and backup software - As part of our testing, we removed our monitoring agent (LabTech) and antivirus (GFI Vipre). Mozy is utilized for an off-site backup so that was disabled. No dice.
* Verified updates - We made absolutely sure the server was 100% patched.
* Malware/Virus/Rootkit checks - We have ran scans checking for any potential issues with security.
* Ran MBSA and MBCA to fix any issues with the server's configuration.
There is no single process which is using all of the CPU, or we would simply be able to narrow it down. Our calls to Microsoft support have yielded no answers. The last call ended with Microsoft stating that a SBS server should always be running
at high CPU usage. Meanwhile, we have many other clients with less-beefy servers, with more users, who have no issues like these.
So, I'm turning to you all. I will gladly provide logs, configuration settings, even remote assistance sessions if you all can help shed some light on what might be causing my issues.
Thank you!

Some comments/ideas:
How long was the server running after this screenshot? I ask because store.exe is only got a 1GB of RAM which is really low - it should grab most of the RAM within a few hours.
The server was up for about 12 hours. I believe an adjustment was made before to limit the Exchange memory usage.
Strange that SearchIndexer (wsearch service) is so high although that may be a startup condition.
The LT* processes seem to be a 3rd party monitoring tool - no idea why it would ever need that much CPU though (I thought you disabled this?).
We had, but we cannot go forever without monitoring our client's server. It has been pulled off in the past and results on performance are pretty much the same.
The taskmgr process run by amnet_admin has used a lot of total CPU Time. What is it? (can't see the command line).
That's the user I was logged in as when I took the screenshot. Even the task manager seems to eat up the CPU.
The sqlserver process right above it is also busy - may want to look at the command line and figure out which SQL database that is (SBS has 3 - WSUS, Sharepoint, and SBS monitoring)
I believe that's the SharePoint database. They don't currently use their site. Would you recommend a removal and reinstallation? I would not completely remove as I know SBS doesn't like you removing parts of the complete package.
Strange that vds.exe is 10% - that is the interface to the disk management interface IIRC. Perhaps your monitoring service has gone awry here - definitely lose it.
I'll see about pulling it off and I'll see if there are any improvements.
-- Al

High CPU usage (more than 100%) while running video applications

Hello everyone,
I desperately need help with this.
I have a late 2007 White Macbook running Mac OS X 10.6.8 :
Model Name:          MacBook
Model Identifier:          MacBook2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          3 GB
Bus Speed:          667 MHz
The issue that I am having is, whenever I play a video (Netflix/Silverlight player, YouTube, Skype, etc.) the CPU usage shoots up above 100% and the video or the video chat becomes VERY choppy. It becomes impossible to keep going once that starts. Originally I had 1Gb RAM (512 + 512) ... then I upgraded to (1GB + 512mb) ... it was fine for about a year and then started chocking on memory... so recently I made it (1GB +2GB) and that's when this high CPU usage thing started (according to my knowledge)
I have had this machine since last 4 years and its very dear to me. I dont wanna buy a new one. I will really appreciate if someone could help.

I am spending sleepless nights, researching for a fix. From what I found so far, a considerable amount of people were able to fix this issue by simple cleaning the insides of their machines using air dusters, especially the fans. I don't know how cleaning would help with CPU utilization, but by interpolation, I feel it's worth a try. At least it will be clean, if not perfectly functional. lol
Now the next big challenge ahead of me is getting the screws on my Macbook open. I was following the Fan Repair Guide on ifixit.com. I went and got the #00 Phillips screwdriver as suggested in the guide... came home and found out the screwdriver is too big.... went back got a #0000 Phillips (I also found out that screwdrivers with same number might be of different sizes in different stores)... got a couple of screws out and then--- another road-block!! there are a few extremely tiny Phillips screws on my macbook. Now I am hunting for the smallest Phillips screwdriver in the world. Hopefully, I will find it in some watch repair or eye-glasses repair kit in a store such as CVS or Walgreens... aaaah... this is sooo frustrating!!! I just want to get his done so that I can check it off the list of probable solutions that I want to try. Will update here if this works.
From what you say, I think that the Silverlight upgrade might be the culprit in my case too. But the effect is there also for Youtube, Skype , or any other Video/Graphics intensive application that I use. Although, Silverlight/Netflix performs the worst among all the apps.
I love my Macbook... don't want to part with it.

EA2: high CPU usage with large packages

EA2 + Debian GNU/Linux + jdk1.6.0_04 + Pentium IV 2,8 GHz 1 GBytes RAM
Opening large packages (> 6.000 rows) I have high CPU usage (100%) for about 50-60 seconds. Same problem when I working with these packages
Ciao
Davide

Opening works fine for me, and memory seems to be
contained. Working inside the package on occasions
still boosts CPU like you.Attempting to edit an 800 line type body utilises 100% CPU as soon as typing starts.
Windows XP Professional SP2
Oracle Server 10.2.0.3
Java 1.5.0_06
Intel Pentium M 1.69GHz 2GB RAM

Microsoft Office 2004 -- extremely high cpu usage and virtual ram

hi,
when i use office it causes a very high cpu usage even when its in idle mode.
i am unable to work with it, because its extremely slow.
does anyone have same experiences?
thanks for your help!
mbp 2.0 1,5gb ram 80gb hdd Mac OS X (10.4.7)

I am able to work OK with office, I'm using the 'old version' Microsoft Office v.X, not much details in the About Box, just listed as MSoft Word/Excel/etc for Mac service release 1.
I get the occasional crash, and I have seen Word in particular use 90% of a single core and amazingly large virtual memory usage, gigabytes sometimes, but eventually the document gets printed.
It shows how useful the dual core (or quad) cpu approach is!
One cpu for Word to print, and one cpu to run the rest of my applications/life!
I still use this old office rather than re-booting into Window§ for whatever is the latest version of office.
Doing some playing with a similar one page document in Office v.X and Pages 2.01, I get Word using about 25% of a core , Pages using 5%, - whilst editing; Intel native Pages has 20% of a core and 80MB ram 480 virtual whilst printing, Word has about 100% of a core and 65MB ram 650 virtual whilst printing, but it is a powerPC code so Rosetta is in there somewhere.
check Activity Monitor or other apps/widgets for some parasitic processes? have fun!
many Macs 512k -> MacBool Pro 2GHz 1GB ram Mac OS X (10.4.7) Yes, I have Key Lime

Lenovo G500 - Intel Rapid Storage Technology" SATA disk on Controller 0, Port Unknown detected"

Hi Folks,
I have a lenovo G500 laptop which i had purchased during thanksgiving vaction in 2013. The machine was working fine till June 2014 when I stated getting Blue Screen of death with error messages "irql_not_less_or_equal" The OS was windows 8.1. This created lot of problem while booting , the machine would not boot at all.
Along with this message I started getting this message "Intel Rapid Storage Technology" SATA disk on Controller 0, Port Unknown detected". This message was coming very often.
I along with Lenovo support did all the things possible, like factory reset etc. Finally the machine was sent out to depot for repair in July 2014. They replaced the hard drive and sent the machine back.
I got the machine back on 22nd July and since last week ,ie, 14th July I have started to get the issues again. My IE and Firefox will suddenly hangon and the blue screen will appear again with same message "irql_not_less_or_equal" occasionally. Yesterday i started getting Sata disk message again.
I wanted to understand why this message is coming back along with blue screen of death. Is there some problem with Windows OS or hard disk seems to crash again?
Thanks in advance
shailesh

hi Shailesh,
Welcome to the Lenovo Forums.
From this article, this is the IRQL_NOT_LESS_OR_EQUAL possible cause:
"This bug check is issued if paged memory (or invalid memory) is accessed when the IRQL is too high.
The error that generates this bug check usually occurs after the installation of a faulty device driver, system service, or BIOS.
If you encounter bug check 0xA while upgrading to a later version of Windows, this error might be caused by a device driver, a system service, a virus scanner, or a backup tool that is incompatible with the new version."
From your description, It's possible that the HDD or the RAM is faulty but it's also possible that it's a software (driver) issue -- which is the hard drive (SATA) controller.
To verify, I would:
1. Run a diagnostic on the HDD (via Lenovo's Storage Quick Test or via HD Tune)
- http://www.hdtune.com/faq_1.html
2. Run a diagnostic on the RAM (via Memtest86+)
- RAM - Test with Memtest86+
3, Read the BSOD dump file to see what file caused the crash
- How to solve Windows 8 crashes in less than a minute
- If the file is associated with the Intel Rapid Storage Technology Driver (SATA Controller), uninstall the software from the Control Panel > Programs and let Windows install a generic Windows driver.
- Link to picture
If you get an error after running the diagnostic test, I recommend you contact Lenovo and report the issue.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Hard Drive Replacement - Windows 7 Updates - Intel Rapid Storage - Lightscribe error 4224

I recently needed to replace a damaged hard drive from overheating on a HP Pavilion dv4 notebook that comes with Windows 7 Home Premium. The whole notebook had to be taken apart so that the dust, which had created a thick sweater, literally, blocking the CPU cooling fans, could be cleaned.
But that was done, it's over with, just dreading the cleanup in the future. Installing a new hard drive was unexpectedly difficult... replacing the physical part had nothing to it but, Windows 7 Updates could not work and Windows 7 SP1 installation from the dvd drive or otherwise did not work. To make it work I installed Intel Rapid Storage Technology (AHCI) package. I used the System Recovery Discs to format and install to factory settings before all else, of course...
All was nice and dandy until I started using Lightscribe to label the recovery discs. Error 4224 - communication error with the drive... etc etc. Updated the drivers and software from HP, completed all Windows 7 updates, updated the Lightscribe System Software and Template Maker, updated BIOS and that was a good thing, kept installing and uninstalling preinstalled HP bundles and antivirus sofware for another few days of irritating work to no avail. Finally, the culprit was found in the Intel Rapid Storage Technology installation!
So, without Intel Rapid Storage Technology package there are no Windows 7 updates and the Windows Genuine error comes up, but with Intel Rapid Storage Technoly there's no Lightscribe functionality. I'm throwing my hands in the air after so much painstaking time spent with these issues. Is there any way around this bind? Is there a known fix to get the new hard drive to be recognized by Microsoft and have the Lightscribe functionality back?

Sometimes issues can arise when a driver is downloaded directly from the manufacturer, because in some cases, there are minor tweaks made to the one made specifically for your computer.
Sometimes the developers (combination of HP software developers and the 3rd party maker's software developers) have to tweak the maker's original driver to work with all of the other components inside your particular computer. All of the dv4-2000s may have, for instance, a specific technology of hard drives and optical drives, but each different dv4-2XXX may have different brands of hard drives/optical drives.
Graphics drivers are that way. I always recommend getting the ATI driver, not from ATI's website, but directly from the HP Driver Page, because getting the version on ATI's website will cause some issues with the HP Framework (which is responsible for making the whole web of specific components all work together) on the computer. After that several things have to be uninstalled and the correct versions have to be installed just to undo what that one driver version did.
It gets a little complicated. Suffice it to say, always try to download it from the HP Driver Page for your model first. Then if that version or previous versions don't work, try downloading directly from the 3rd party maker's page. I hope that makes sense. Let me know if I need to clarify anything
I'm going to recommend the following drivers:
Intel Chipset Driver version 9.1.1.1020 A
Intel Management Engine Interface Driver version 1.00 A
Intel Matrix Storage Manager Driver version 8.9.2.1002 A
Intel Turbo Boost Technology Driver version 1.0.0.1030 A
Essential System Updates version 7.00 A
LightScribe System Software version 1.18.18.1
Also, please check and see what BIOS version you're currently on. To do that, press the FN + ESC keys and look for 'F.##' and let me know what that is. I'll compare it to the latest version and link you to that one if necessary.

High CPU Usage on Cisco 3845

Hi all,
I'm having high CPU usage with one of my Cisco 3845.
It works as an IP-IP Gateway and the CPU is quite high when the total number of calls only around 100-200 calls.
I check the CPU usage with "show process cpu sort" and it looks like there are some "hidden" processes that consuming CPU.
For example, 41% is total CPU, 25% is due to interrups, so CPU utilization on process level = 41 - 25 = 16%.
But as showed below, processes don't consume that much CPU, only around 7% ???
Please help to advise on this case. Any help is highly appreciated..
Thank you.
3845-GW#show process cpu sort | ex 0.00% 0.00% 0.00%
CPU utilization for five seconds: 41%/25%; one minute: 46%; five minutes: 47%
PID Runtime(ms)     Invoked      uSecs     5Sec   1Min   5Min TTY Process
382     6619708     1473171       4493      1.59% 1.81% 1.92%   0 CCSIP_SPI_CONTRO
141     4228940    10181955        415      1.35% 1.51% 1.57%   0 IP Input
65     2450824      163102      15026        1.19% 1.16% 1.17%   0 Per-Second Jobs
370     2702292     3709512        728        0.87% 0.88% 0.88%   0 VOIP_RTCP
224      321680      245640       1309    0.47% 0.49% 0.50%   0 AFW_application_
112       93940    18093506          5             0.39% 0.31% 0.32%   0 Ethernet Msec Ti
384     1058280     1553567        681         0.23% 0.28% 0.30%   0 CCSIP_UDP_SOCKET
   2       18148       32905        551                 0.07% 0.03% 0.02%   0 Load Meter
137       35644     4657843          7               0.07% 0.04% 0.05%   0 IPAM Manager
189      206392      267959        770            0.07% 0.05% 0.07%   0 TCP Protocols
30       30792      198554        155               0.07% 0.01% 0.00%   0 ARP Input
368      145456      176151        825             0.07% 0.04% 0.05%   0 CC-API_VCM
28        9628       32759        293 0.00% 0.01% 0.00%   0 Environmental mo
48      221352       37922       5837 0.00% 0.11% 0.11%   0 Net Background
63       16728       32924        508 0.00% 0.01% 0.00%   0 Compute load avg
64       72080        2781      25918 0.00% 0.01% 0.00%   0 Per-minute Jobs
   6      371644       29792      12474 0.00% 0.14% 0.12%   0 Check heaps
176       12216      240288         50 0.00% 0.01% 0.00%   0 CEF: IPv4 proces
284       36416     4929826          7 0.00% 0.02% 0.01%   0 MMON MENG
307       12168      806151         15 0.00% 0.01% 0.00%   0 Atheros LED Ctro
335       35300       19755       1786 0.00% 3.16% 1.00% 708 Virtual Exec
3845-GW#sh int g0/0
GigabitEthernet0/0 is up, line protocol is up
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full Duplex, 1Gbps, media type is RJ45
output flow-control is XON, input flow-control is XON
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/2/56803 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 1551000 bits/sec, 5751 packets/sec
5 minute output rate 4207000 bits/sec, 7643 packets/sec
     925128804 packets input, 939078510 bytes, 0 no buffer
     Received 62732 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 2 throttles
     2 input errors, 0 CRC, 0 frame, 2 overrun, 0 ignored
     0 watchdog, 3763438515 multicast, 0 pause input
     1472816545 packets output, 3214770103 bytes, 0 underruns
     0 output errors, 2067720191 collisions, 1 interface resets
     0 unknown protocol drops
     0 babbles, 2281155551 late collision, 0 deferred
     2 lost carrier, 0 no carrier, 0 pause output
     0 output buffer failures, 0 output buffers swapped out
3845-GW#sh int g0/1
GigabitEthernet0/1 is up, line protocol is up
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full Duplex, 1Gbps, media type is RJ45
output flow-control is XON, input flow-control is XON
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/30335 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 1684000 bits/sec, 7697 packets/sec
5 minute output rate 3372000 bits/sec, 5632 packets/sec
     1484558664 packets input, 2383177786 bytes, 0 no buffer
     Received 208998 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles
     2 input errors, 0 CRC, 0 frame, 2 overrun, 0 ignored
     0 watchdog, 3060386282 multicast, 0 pause input
     903478941 packets output, 2814588854 bytes, 0 underruns
     0 output errors, 2910776303 collisions, 1 interface resets
     0 unknown protocol drops
     0 babbles, 4157448025 late collision, 0 deferred
     2 lost carrier, 0 no carrier, 0 pause output
     0 output buffer failures, 0 output buffers swapped out

Has this been something that just recently started happening, or have you had this issue for a while? Have you installed any new programs recently?
You may want to download Glary Utilities, which is a free software(they will ask you if you want to go Pro, just say no, the free version works very well). There is a module for startup manager. You can go in and disable stuff that starts with the computer. I would advise unchecking adobe, java, quicktime, printers, etc. Anything that doesn't REALLY need to start with the computer. The nice thing with Glary is that you can restart the computer, and if you find that you need one of the programs to start with windows, you can go back in and enable it again.
The Celeron 925 processor in your computer is a decent entry level processor, but if there are too many programs running in the background, it can bog down quick. I would also recommend downloading and running Malwarebytes Anti-malware, to be sure that there is nothing malicous running in the background.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

High cpu usage when moving application windows

Hello all,
I have two machines with arch installed:
- an eeepc 701 surf/intel gpu(xorg driver) with xfce
- an amd 3800+ X2/nvidia 8860 gt(proprietary driver) with kdemod3(also checked with xfce4)/arch amd64 installed.
I noticed that when i move a window of an application(for example konsole, etc..) too fast i get high cpu usage(30-40 %), when checking with htop.
Is it normal that the X server uses the cpu so much when moving a window??
EDIT: up to now i tested it in a friends windows machine, and it happens exactly the same, so i guess is normal. It seems i need to be informed better about how X works :-)
Last edited by mechmg93 (2008-10-15 08:04:10)

today i switced back my desktop system to debian unstable and tried to see what the difference is concerning this problem.
I found out that in kde3 the solution to the "problem" is debians kde default configuration about window behaviour.
Especially the one mentioned below :
In debian this is not ticked and this has as a result zero cpu usage when windows are moved.
Last edited by mechmg93 (2008-10-23 18:36:58)

Everytime time I try to upload a document or an image, it takes for ever and ever. I get a warning saying " High CPU usage by Firefox " How do I change this ? Can anyone explain ? thanks Lazarus 3

Everytime time I try to upload a document or an image, it takes for ever and ever. I get a warning saying " High CPU usage by Firefox " How do I change this ? Can anyone explain ? thanks Lazarus 3

Here is the new troubleshooting information, if it helps.
Application Basics
Name: Firefox
Version: 24.0
User Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0
Extensions
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.startup.homepage_override.buildID: 20130910160258
browser.startup.homepage_override.mstone: 24.0
extensions.lastAppVersion: 24.0
gfx.blacklist.webgl.msaa: 4
network.cookie.prefsMigrated: true
plugin.importedState: true
plugin.state.silverlight: 0
privacy.sanitize.migrateFx3Prefs: true
Graphics
Device ID: 0x 655
GPU Accelerated Windows: 1/1 OpenGL
Vendor ID: 0x10de
WebGL Renderer: NVIDIA Corporation -- NVIDIA GeForce GT 120 OpenGL Engine
windowLayerManagerRemote: false
AzureCanvasBackend: quartz
AzureContentBackend: none
AzureFallbackCanvasBackend: none
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10
Version in use: 4.10
NSS
Expected minimum version: 3.15.1 Basic ECC
Version in use: 3.15.1 Basic ECC
NSSSMIME
Expected minimum version: 3.15.1 Basic ECC
Version in use: 3.15.1 Basic ECC
NSSSSL
Expected minimum version: 3.15.1 Basic ECC
Version in use: 3.15.1 Basic ECC
NSSUTIL
Expected minimum version: 3.15.1
Version in use: 3.15.1

/sbin/init high CPU usage (80%)

My PC run slowly, I viewed the processes by htop utility and it revealed that /sbin/init has a constantly high CPU usage, around 70-80%. I scanned it with clamscan virus scanner, but not infected. What can I do to fix this problem?

Did you mean "ps -ef" ? Then:
UID PID PPID C STIME TTY TIME CMD
root 1 0 8 Sep22 ? 08:27:41 /usr/lib/systemd/systemd --system --deserialize 131
root 2 0 0 Sep22 ? 00:00:00 [kthreadd]
root 3 2 0 Sep22 ? 00:45:38 [ksoftirqd/0]
root 5 2 0 Sep22 ? 00:00:00 [kworker/0:0H]
root 7 2 0 Sep22 ? 00:05:10 [rcu_preempt]
root 8 2 0 Sep22 ? 00:00:03 [rcu_sched]
root 9 2 0 Sep22 ? 00:00:00 [rcu_bh]
root 10 2 0 Sep22 ? 00:00:02 [migration/0]
root 11 2 0 Sep22 ? 00:00:01 [watchdog/0]
root 12 2 0 Sep22 ? 00:00:01 [watchdog/1]
root 13 2 0 Sep22 ? 00:00:02 [migration/1]
root 14 2 0 Sep22 ? 00:54:35 [ksoftirqd/1]
root 16 2 0 Sep22 ? 00:00:00 [kworker/1:0H]
root 17 2 0 Sep22 ? 00:00:00 [khelper]
root 18 2 0 Sep22 ? 00:00:00 [kdevtmpfs]
root 19 2 0 Sep22 ? 00:00:00 [netns]
root 20 2 0 Sep22 ? 00:00:00 [khungtaskd]
root 21 2 0 Sep22 ? 00:00:00 [writeback]
root 22 2 0 Sep22 ? 00:00:00 [ksmd]
root 23 2 0 Sep22 ? 00:00:52 [khugepaged]
root 24 2 0 Sep22 ? 00:00:00 [crypto]
root 25 2 0 Sep22 ? 00:00:00 [kintegrityd]
root 26 2 0 Sep22 ? 00:00:00 [bioset]
root 27 2 0 Sep22 ? 00:00:00 [kblockd]
root 30 2 0 Sep22 ? 00:05:54 [kswapd0]
root 31 2 0 Sep22 ? 00:00:00 [fsnotify_mark]
root 35 2 0 Sep22 ? 00:00:00 [kthrotld]
root 36 2 0 Sep22 ? 00:00:00 [ipv6_addrconf]
root 37 2 0 Sep22 ? 00:00:00 [deferwq]
root 63 2 0 Sep22 ? 00:00:00 [khubd]
root 64 2 0 Sep22 ? 00:00:00 [firewire]
root 65 2 0 Sep22 ? 00:00:00 [firewire_ohci]
root 66 2 0 Sep22 ? 00:00:00 [ata_sff]
root 68 2 0 Sep22 ? 00:00:00 [scsi_eh_0]
root 69 2 0 Sep22 ? 00:00:00 [scsi_tmf_0]
root 70 2 0 Sep22 ? 00:00:00 [scsi_eh_1]
root 71 2 0 Sep22 ? 00:00:00 [scsi_tmf_1]
root 74 2 0 Sep22 ? 00:00:00 [scsi_eh_2]
root 75 2 0 Sep22 ? 00:00:00 [scsi_tmf_2]
root 76 2 0 Sep22 ? 00:00:00 [scsi_eh_3]
root 77 2 0 Sep22 ? 00:00:00 [scsi_tmf_3]
root 88 2 0 Sep22 ? 00:01:22 [kworker/0:1H]
root 89 2 0 Sep22 ? 00:00:00 [scsi_eh_4]
root 90 2 0 Sep22 ? 00:00:00 [scsi_tmf_4]
root 91 2 0 Sep22 ? 00:00:07 [usb-storage]
root 99 2 0 Sep22 ? 00:00:00 [kworker/1:1H]
root 101 2 0 Sep22 ? 00:00:27 [jbd2/sda1-8]
root 102 2 0 Sep22 ? 00:00:00 [ext4-rsv-conver]
root 130 1 0 Sep22 ? 00:08:22 /usr/lib/systemd/systemd-journald
root 145 2 0 Sep22 ? 00:00:00 [rpciod]
root 147 2 0 Sep22 ? 00:00:00 [nfsiod]
root 163 1 0 Sep22 ? 00:00:00 /usr/lib/systemd/systemd-udevd
root 221 2 0 Sep22 ? 00:00:00 [kpsmoused]
root 243 1 1 Sep22 ? 01:39:24 /sbin/mount.ntfs-3g /dev/sda2 /mnt/ntfs -n -o rw,uid=1000,gid=100,dmask=022,fmask=133
root 251 1 0 Sep22 ? 00:00:34 /usr/lib/systemd/systemd-logind
dbus 253 1 0 Sep22 ? 00:02:38 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
root 254 1 0 Sep22 ? 00:02:32 /usr/bin/haveged -w 1024 -v 1
root 255 1 0 Sep22 ? 00:00:00 /usr/bin/dhcpcd -q -b
rpc 258 1 0 Sep22 ? 00:00:00 /usr/bin/rpcbind -w
root 288 1 0 Sep22 ? 00:00:13 /usr/bin/NetworkManager --no-daemon
root 295 1 0 Sep22 ? 00:00:00 /usr/sbin/rpc.idmapd
root 330 2 0 Sep22 ? 00:00:00 [cfg80211]
polkitd 333 1 0 Sep22 ? 00:00:09 /usr/lib/polkit-1/polkitd --no-debug
tor 436 1 0 Sep22 ? 00:03:27 /usr/bin/tor -f /etc/tor/torrc
privoxy 438 1 0 Sep22 ? 00:00:00 /usr/bin/privoxy --pidfile /run/privoxy.pid --user privoxy.privoxy /etc/privoxy/config
root 445 1 0 Sep22 ? 00:00:00 /usr/sbin/rpc.statd --no-notify
root 449 1 0 Sep22 ? 00:00:00 /usr/sbin/rpc.mountd
root 466 2 0 Sep22 ? 00:00:00 [nfsv4.0-svc]
root 500 1 0 Sep22 ? 00:00:00 /usr/sbin/lxdm-binary
root 503 500 6 Sep22 tty7 06:37:07 /usr/bin/Xorg.bin :0 vt07 -nolisten tcp -novtswitch
root 1755 500 0 Sep22 ? 00:00:00 /usr/lib/lxdm/lxdm-session
walaki 1756 1 0 Sep22 ? 00:00:00 /usr/lib/systemd/systemd --user
walaki 1757 1756 0 Sep22 ? 00:00:00 (sd-pam)
walaki 1763 1755 0 Sep22 ? 00:00:00 /bin/sh /etc/xdg/xfce4/xinitrc -- /etc/X11/xinit/xserverrc
walaki 1773 1 0 Sep22 ? 00:00:00 dbus-launch --sh-syntax --exit-with-session
walaki 1774 1 0 Sep22 ? 00:00:21 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
walaki 1781 1763 0 Sep22 ? 00:00:46 xfce4-session
walaki 1784 1 0 Sep22 ? 00:00:00 /usr/lib/xfce4/xfconf/xfconfd
walaki 1789 1 0 Sep22 ? 00:00:16 /usr/bin/gpg-agent --sh --daemon --enable-ssh-support --write-env-file /home/walaki/.cache/gpg-agent-info
walaki 1792 1781 0 Sep22 ? 00:01:54 xfwm4 --display :0.0 --sm-client-id 23fec2b63-e849-4a72-8ded-64b47902bd41
walaki 1795 1781 0 Sep22 ? 00:00:35 Thunar --sm-client-id 2d0147b28-0a91-4a3b-a669-064fc26ae553 --daemon
walaki 1797 1781 0 Sep22 ? 00:09:43 xfce4-panel --display :0.0 --sm-client-id 247d7309b-f81b-4064-adbd-0875fed923d4
walaki 1798 1781 0 Sep22 ? 00:00:18 xfdesktop --display :0.0 --sm-client-id 2e572e480-670a-4c6f-af62-2339f19929ef
walaki 1799 1 0 Sep22 ? 00:00:36 xfsettingsd --display :0.0 --sm-client-id 26269b48e-af0b-4399-b385-5305502e24f1
walaki 1802 1781 1 Sep22 ? 01:24:09 /usr/lib/skype/skype -session 21d1f7d38-8c0a-41de-98b7-021e4f2a5bd7_1410900031_251500
walaki 1803 1781 0 Sep22 ? 00:00:06 kruler -session 20c051002-8d7b-4c2c-bf0b-c384f149b9b5_1410900031_629257
walaki 1806 1 0 Sep22 ? 00:00:01 xfce4-power-manager --restart --sm-client-id 2154ad16d-be90-40bc-8354-c2647728cf16
walaki 1810 1 0 Sep22 ? 00:00:00 /usr/lib/gvfs/gvfsd
walaki 1823 1 0 Sep22 ? 00:00:00 /usr/lib/gvfs/gvfsd-fuse /run/user/1000/gvfs -f -o big_writes
walaki 1825 1797 0 Sep22 ? 00:00:02 /usr/lib/xfce4/panel/wrapper /usr/lib/xfce4/panel/plugins/libsystray.so 6 14680094 systray Notification Area Area where notification icons appear
walaki 1833 1797 0 Sep22 ? 00:00:07 /usr/lib/xfce4/panel/wrapper /usr/lib/xfce4/panel/plugins/libmixer.so 15 14680095 mixer Audio Mixer Adjust volume levels
walaki 1834 1797 0 Sep22 ? 00:44:27 /usr/lib/xfce4/panel/wrapper /usr/lib/xfce4/panel/plugins/libweather.so 16 14680096 weather Weather Update Show current weather conditions
walaki 1835 1797 0 Sep22 ? 00:46:02 /usr/lib/xfce4/panel/wrapper /usr/lib/xfce4/panel/plugins/libsystemload.so 17 14680097 systemload System Load Monitor Monitor CPU load, swap usage and memory footprint
walaki 1836 1797 0 Sep22 ? 00:00:03 /usr/lib/xfce4/panel/wrapper /usr/lib/xfce4/panel/plugins/libactions.so 2 14680098 actions Action Buttons Log out, lock or other system actions
walaki 1841 1797 0 Sep22 ? 00:00:03 /usr/lib/xfce4/panel/wrapper /usr/lib/xfce4/panel/plugins/libthunar-tpa.so 8 14680102 thunar-tpa Trash Applet Display the trash can
walaki 1843 1 0 Sep22 ? 00:00:04 /usr/lib/gvfs/gvfs-udisks2-volume-monitor
walaki 1846 1 0 Sep22 ? 00:00:03 /usr/lib/gvfs/gvfsd-trash --spawner :1.9 /org/gtk/gvfs/exec_spaw/0
root 1856 1 0 Sep22 ? 00:00:00 /usr/lib/upower/upowerd
root 1857 1 0 Sep22 ? 00:02:10 /usr/lib/udisks2/udisksd --no-debug
walaki 1862 1 0 Sep22 ? 00:09:10 kwooty -session 2fc05dbf4-9492-4cf1-bd80-efe7e47dfb90_1410900031_251208
walaki 1895 1 0 Sep22 ? 00:00:00 /usr/lib/GConf/gconfd-2
walaki 1904 1 0 Sep22 ? 00:00:05 /usr/bin/python2 /usr/bin/glipper
walaki 1907 1 0 Sep22 ? 00:00:06 nm-applet
walaki 1922 1 0 Sep22 ? 00:00:00 /usr/lib/at-spi2-core/at-spi-bus-launcher
walaki 1926 1922 0 Sep22 ? 00:00:25 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --nofork --print-address 3
walaki 1930 1 0 Sep22 ? 00:00:03 /usr/lib/evolution/3.12/evolution-alarm-notify
walaki 1936 1 1 Sep22 ? 01:59:26 firefox
walaki 1938 1 0 Sep22 ? 00:01:08 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
walaki 2023 1 0 Sep22 ? 00:00:00 /usr/lib/evolution-data-server/evolution-source-registry
walaki 2043 1 0 Sep22 ? 00:00:25 /usr/lib/gnome-online-accounts/goa-daemon
walaki 2058 1 0 Sep22 ? 00:00:01 /usr/lib/evolution-data-server/evolution-calendar-factory
walaki 2084 1 0 Sep22 ? 00:00:00 kdeinit4: kdeinit4 Runnin e
walaki 2089 2084 0 Sep22 ? 00:00:00 kdeinit4: klauncher [kdei e
walaki 2101 1 0 Sep22 ? 00:00:06 kdeinit4: kded4 [kdeinit]
walaki 5752 1 0 Sep22 ? 00:00:01 /usr/bin/gnome-keyring-daemon --start --foreground --components=secrets
walaki 5887 1789 0 Sep22 ? 00:01:01 scdaemon --multi-server
walaki 7557 11505 0 11:19 pts/8 00:00:00 /bin/bash
walaki 8876 19571 0 12:04 pts/4 00:00:03 mc
walaki 8878 8876 0 12:04 pts/9 00:00:00 bash -rcfile .bashrc
root 10950 2 0 18:10 ? 00:00:02 [kworker/u4:1]
walaki 10953 18727 0 18:10 pts/6 00:00:04 mc
walaki 10955 10953 0 18:10 pts/7 00:00:00 bash -rcfile .bashrc
walaki 11492 1797 0 Sep23 ? 00:02:06 /usr/bin/python2 /usr/bin/terminator
walaki 11504 11492 0 Sep23 ? 00:00:00 gnome-pty-helper
walaki 11505 11492 0 Sep23 pts/8 00:00:00 /bin/bash
walaki 12283 1797 0 13:19 ? 00:00:26 /usr/bin/python2 /usr/bin/terminator
walaki 12299 12283 0 13:19 ? 00:00:00 gnome-pty-helper
walaki 12300 12283 0 13:19 pts/1 00:00:00 /bin/bash
walaki 12707 1797 0 13:23 ? 00:02:59 geany
walaki 12713 12707 0 13:23 ? 00:00:00 gnome-pty-helper
walaki 12714 12707 0 13:23 pts/11 00:00:00 /bin/bash
walaki 13471 1797 0 18:31 ? 00:00:18 /usr/bin/python2 /usr/bin/terminator
walaki 13487 13471 0 18:31 ? 00:00:00 gnome-pty-helper
walaki 13488 13471 0 18:31 pts/3 00:00:00 /bin/bash
walaki 13751 13488 0 18:33 pts/3 00:00:00 /bin/bash
walaki 16906 1797 46 13:59 ? 04:12:08 /usr/lib/opera-next/opera-next
walaki 18711 1797 0 Sep23 ? 00:05:05 /usr/bin/python2 /usr/bin/terminator
walaki 18726 18711 0 Sep23 ? 00:00:00 gnome-pty-helper
walaki 18727 18711 0 Sep23 pts/6 00:00:00 /bin/bash
walaki 19550 1797 0 Sep22 ? 00:01:48 /usr/bin/python2 /usr/bin/terminator
walaki 19570 19550 0 Sep22 ? 00:00:00 gnome-pty-helper
walaki 19571 19550 0 Sep22 pts/4 00:00:00 /bin/bash
walaki 21931 23464 3 20:17 ? 00:04:59 /opt/google/chrome/chrome --type=renderer --lang=en-US --force-fieldtrials=AutoReloadExperiment/Enabled/ChromeSuggestions/Most Likely with Kodachrome/ExtensionInstallVerification/None/OmniboxBundledExperimentV1/StandardR4/Prerender/PrerenderEnabled/PrerenderFromOmnibox/OmniboxPrerenderEnabled/PrerenderLocalPredictorSpec/LocalPredictor=Disabled/SPDY/SpdyDisabled/SettingsEnforcement/no_enforcement/Test0PercentDefault/group_01/UMA-Dynamic-Binary-Uniformity-Trial/default/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Population-Restrict/normal/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_14/UMA-Uniformity-Trial-1-Percent/group_22/UMA-Uniformity-Trial-10-Percent/group_05/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_03/UMA-Uniformity-Trial-5-Percent/group_14/UMA-Uniformity-Trial-50-Percent/default/VoiceTrigger/Install/ --renderer-print-preview --enable-offline-auto-reload --enable-threaded-compositing --enable-delegated-renderer --disable-accelerated-video-decode --disable-webrtc-hw-encoding --disable-gpu-compositing --channel=23445.24.769536197
walaki 22985 23464 0 20:39 ? 00:00:55 /opt/google/chrome/chrome --type=renderer --lang=en-US --force-fieldtrials=AutoReloadExperiment/Enabled/ChromeSuggestions/Most Likely with Kodachrome/ExtensionInstallVerification/None/OmniboxBundledExperimentV1/StandardR4/Prerender/PrerenderEnabled/PrerenderFromOmnibox/OmniboxPrerenderEnabled/PrerenderLocalPredictorSpec/LocalPredictor=Disabled/SPDY/SpdyDisabled/SettingsEnforcement/no_enforcement/Test0PercentDefault/group_01/UMA-Dynamic-Binary-Uniformity-Trial/default/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Population-Restrict/normal/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_14/UMA-Uniformity-Trial-1-Percent/group_22/UMA-Uniformity-Trial-10-Percent/group_05/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_03/UMA-Uniformity-Trial-5-Percent/group_14/UMA-Uniformity-Trial-50-Percent/default/VoiceTrigger/Install/ --renderer-print-preview --enable-offline-auto-reload --enable-threaded-compositing --enable-delegated-renderer --disable-accelerated-video-decode --disable-webrtc-hw-encoding --disable-gpu-compositing --channel=23445.25.841939391
walaki 23052 23464 2 20:40 ? 00:03:57 /opt/google/chrome/chrome --type=ppapi --channel=23445.26.1843768387 --ppapi-flash-args --lang=en-US
walaki 23445 1 3 15:02 ? 00:16:57 /opt/google/chrome/chrome
walaki 23453 23445 0 15:02 ? 00:00:05 /opt/google/chrome/chrome --type=sandbox-ipc
walaki 23454 23445 0 15:02 ? 00:00:00 /opt/google/chrome/chrome-sandbox /opt/google/chrome/chrome --type=zygote
walaki 23455 23454 0 15:02 ? 00:00:00 /opt/google/chrome/chrome --type=zygote
walaki 23461 23455 0 15:02 ? 00:00:00 /opt/google/chrome/chrome-sandbox /opt/google/chrome/nacl_helper
walaki 23462 23461 0 15:02 ? 00:00:00 /opt/google/chrome/nacl_helper
walaki 23464 23455 0 15:02 ? 00:00:00 /opt/google/chrome/chrome --type=zygote
walaki 23484 23445 0 15:03 ? 00:00:04 /opt/google/chrome/chrome --type=gpu-process --channel=23445.0.587379006 --supports-dual-gpus=false --gpu-driver-bug-workarounds=1,14,20,23,43 --disable-accelerated-video-decode --gpu-vendor-id=0x10de --gpu-device-id=0x0322 --gpu-driver-vendor --gpu-driver-version
walaki 23672 23464 0 15:04 ? 00:01:06 /opt/google/chrome/chrome --type=renderer --lang=en-US --force-fieldtrials=AutoReloadExperiment/Enabled/ChromeSuggestions/Most Likely with Kodachrome/ExtensionInstallVerification/None/OmniboxBundledExperimentV1/StandardR4/Prerender/PrerenderEnabled/PrerenderFromOmnibox/OmniboxPrerenderEnabled/PrerenderLocalPredictorSpec/LocalPredictor=Disabled/SPDY/SpdyDisabled/SettingsEnforcement/no_enforcement/Test0PercentDefault/group_01/UMA-Dynamic-Binary-Uniformity-Trial/default/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Population-Restrict/normal/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_14/UMA-Uniformity-Trial-1-Percent/group_22/UMA-Uniformity-Trial-10-Percent/group_05/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_03/UMA-Uniformity-Trial-5-Percent/group_14/UMA-Uniformity-Trial-50-Percent/default/VoiceTrigger/Install/ --renderer-print-preview --enable-offline-auto-reload --enable-threaded-compositing --enable-delegated-renderer --disable-accelerated-video-decode --disable-webrtc-hw-encoding --disable-gpu-compositing --channel=23445.5.858801638
root 23962 288 0 Sep25 ? 00:00:00 /usr/bin/dhclient -d -sf /usr/lib/networkmanager/nm-dhcp-helper -pf /var/run/dhclient-enp2s8.pid -lf /var/lib/NetworkManager/dhclient-a8966a98-c9d9-4425-9e4d-459c41d83921-enp2s8.lease -cf /var/lib/NetworkManager/dhclient-enp2s8.conf enp2s8
root 24159 1 0 15:08 tty2 00:00:00 /sbin/agetty --noclear tty2 linux
root 24165 1 0 15:08 tty3 00:00:00 /sbin/agetty --noclear tty3 linux
root 24169 1 0 15:08 tty5 00:00:00 /sbin/agetty --noclear tty5 linux
root 24174 1 0 15:08 tty6 00:00:00 /sbin/agetty --noclear tty6 linux
walaki 25161 1 2 Sep23 ? 02:22:03 audacious
root 25840 2 0 21:32 ? 00:00:01 [kworker/1:1]
walaki 27082 23464 4 21:51 ? 00:02:56 /opt/google/chrome/chrome --type=renderer --lang=en-US --force-fieldtrials=AutoReloadExperiment/Enabled/ChromeSuggestions/Most Likely with Kodachrome/ExtensionInstallVerification/None/OmniboxBundledExperimentV1/StandardR4/Prerender/PrerenderEnabled/PrerenderFromOmnibox/OmniboxPrerenderEnabled/PrerenderLocalPredictorSpec/LocalPredictor=Disabled/SPDY/SpdyDisabled/SettingsEnforcement/no_enforcement/Test0PercentDefault/group_01/UMA-Dynamic-Binary-Uniformity-Trial/default/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Population-Restrict/normal/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_14/UMA-Uniformity-Trial-1-Percent/group_22/UMA-Uniformity-Trial-10-Percent/group_05/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_03/UMA-Uniformity-Trial-5-Percent/group_14/UMA-Uniformity-Trial-50-Percent/default/VoiceTrigger/Install/ --renderer-print-preview --enable-offline-auto-reload --enable-threaded-compositing --enable-delegated-renderer --disable-accelerated-video-decode --disable-webrtc-hw-encoding --disable-gpu-compositing --channel=23445.29.1207326524
root 27424 2 0 22:00 ? 00:00:00 [kworker/0:1]
root 27664 2 0 15:42 ? 00:00:04 [kworker/u4:2]
root 27769 2 0 22:07 ? 00:00:00 [kworker/1:2]
walaki 28865 1 0 Sep25 ? 00:00:00 /usr/lib/gvfs/gvfsd-http --spawner :1.9 /org/gtk/gvfs/exec_spaw/1
walaki 29628 8878 0 22:54 pts/9 00:00:02 /usr/bin/ruby /home/walaki/util/mr1 Nekem az ég - hazafutás
walaki 29652 23464 0 22:54 ? 00:00:00 /opt/google/chrome/chrome --type=renderer --lang=en-US --force-fieldtrials=AutoReloadExperiment/Enabled/ChromeSuggestions/Most Likely with Kodachrome/ExtensionInstallVerification/None/OmniboxBundledExperimentV1/StandardR4/Prerender/PrerenderEnabled/PrerenderFromOmnibox/OmniboxPrerenderEnabled/PrerenderLocalPredictorSpec/LocalPredictor=Disabled/SPDY/SpdyDisabled/SettingsEnforcement/no_enforcement/Test0PercentDefault/group_01/UMA-Dynamic-Binary-Uniformity-Trial/default/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Population-Restrict/normal/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_14/UMA-Uniformity-Trial-1-Percent/group_22/UMA-Uniformity-Trial-10-Percent/group_05/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_03/UMA-Uniformity-Trial-5-Percent/group_14/UMA-Uniformity-Trial-50-Percent/default/VoiceTrigger/Install/ --renderer-print-preview --enable-offline-auto-reload --enable-threaded-compositing --enable-delegated-renderer --disable-accelerated-video-decode --disable-webrtc-hw-encoding --disable-gpu-compositing --channel=23445.30.161699173
root 29693 2 0 22:55 ? 00:00:00 [kworker/0:2]
root 29915 2 0 23:00 ? 00:00:00 [kworker/0:0]
root 29930 27664 89 23:00 ? 00:00:31 /usr/lib/systemd/systemd-coredump 29431 1000 100 6 1411765249 wavparse1374:si
walaki 29946 10955 0 23:01 pts/7 00:00:00 ps -ef
walaki 29948 10955 0 23:01 pts/7 00:00:00 leafpad
walaki 30148 1 0 Sep23 ? 00:00:00 /usr/lib/dconf/dconf-service
walaki 30523 1 0 Sep25 ? 00:00:00 /bin/sh /home/walaki/jdownloader/JDLauncher
walaki 30544 30523 0 Sep25 ? 00:04:54 /usr/lib/jvm/java-default-runtime/bin/java -Dinstall4j.jvmDir=/usr -Dexe4j.moduleName=/home/walaki/jdownloader/JDLauncher -Xmx512m -Xms64m -Dinstall4j.launcherId=26 -Dinstall4j.swt=false -Di4j.vmov=true -Di4j.vmov=true -Di4j.vmov=true -Di4j.vmov=true -Di4j.vmov=true -Di4j.vpt=true -classpath /home/walaki/jdownloader/.install4j/i4jruntime.jar:/home/walaki/jdownloader/JDownloader.jar com.install4j.runtime.launcher.Launcher launch jd.Main true false true true false true true 0 0 20 20 Arial 0,0,0 8 500 version 0.9 20 40 Arial 0,0,0 8 500 -1

Tecra Z50-A - Intel Rapid Storage Technology not working

Dear,
We have purchased a lot of Toshiba Tecra Z50-A laptops with a Hybrid HDD (with SSD cache).
The exact model:
TECRA Z50-A
PT544E-00D01TBT
We stage and re-partition the laptops via SCCM.
However, when installing all drivers and the Intel Rapid Storage Technology software, I see that only rge HDD is used and no SSD partition with Intel RST.
How can we enable this?
The problem is that the performance is incredibly bad.
The laptops are very slow even though the specs are good:
i5-4200U CPU
8GB RAM
Windows 7 x64
Any idea how to enable this Intel RST?
In the BIOS I can't find any options for RAID as this needs to be enabled for RST to work.
Thank you

Well, I have tried the the latest Intel RST drivers from the Toshiba site and from the Intel site as well.
When installing the driver from Intel I also have the Intel RST Control Center where you can view and change some settings.
From all the info I've gathered, there should be an "Accelerate" tab in the Intel RST Control Center but there isn't.
What ever I try, the performance of all our Toshiba laptops are bad. Very bad. (we have 100 +)
Every user who received a Toshiba complained about the performance.
Right now I am testing it with a different HDD (WD 320GB 7200rpm)... No difference.
Seriously, these laptop are the worst I've worked with in the last decade.

MSI C847MS-E33 Intel Rapid Storage Tech support

Greetings,
as advised by power member this topic was moved from discussion topic found here:
https://forum-en.msi.com/index.php?topic=167094.0
System description:
MB: MSI C847MS-E33 (integrated BGA Celeron C847 with Intel HD2000 graphics on NM70 Chipset)
RAM: 2x4GB 1600MHz Patriot value series (working at 1333MHz)
HDD: WD Blue WD6400AAKS 640GB SATA (connected to main SATA port (SATA gen3)
PSU: Antec EarthWats 380 80+ Silver (branded Seasonic 380W)
OS: Windows 7 x64 Ultimate
Description of problem:
Intel Rapid Storage Technology is not working.
At MB download section, at drivers there is a driver for IRST, while it can not be installed as driver setup gives message that system does not have minimum requirements met.
http://www.msi.com/product/mb/C847MS-E33.html#/?div=Driver&os=Win8%2064
In BIOS there is a section for IRST, but that option can not be selected or changed from "Disabled".
Chipset and CPU have support for this technology and after reading forums I can confirm that this option is working properly on different manufacturers boards with same configuration (Gigabyte and ECS).
Conclusion is that MSI designers overlooked this section of BIOS, and that IRST section of it is bugged.
Can this be solved?
BTW, I have sent question about this issue at MSI support with no answer yet.

Greetings,
as advised by power member this topic was moved from discussion topic found here:
https://forum-en.msi.com/index.php?topic=167094.0
System description:
MB: MSI C847MS-E33 (integrated BGA Celeron C847 with Intel HD2000 graphics on NM70 Chipset)
RAM: 2x4GB 1600MHz Patriot value series (working at 1333MHz)
HDD: WD Blue WD6400AAKS 640GB SATA (connected to main SATA port (SATA gen3)
PSU: Antec EarthWats 380 80+ Silver (branded Seasonic 380W)
OS: Windows 7 x64 Ultimate
Description of problem:
Intel Rapid Storage Technology is not working.
At MB download section, at drivers there is a driver for IRST, while it can not be installed as driver setup gives message that system does not have minimum requirements met.
http://www.msi.com/product/mb/C847MS-E33.html#/?div=Driver&os=Win8%2064
In BIOS there is a section for IRST, but that option can not be selected or changed from "Disabled".
Chipset and CPU have support for this technology and after reading forums I can confirm that this option is working properly on different manufacturers boards with same configuration (Gigabyte and ECS).
Conclusion is that MSI designers overlooked this section of BIOS, and that IRST section of it is bugged.
Can this be solved?
BTW, I have sent question about this issue at MSI support with no answer yet.

Intel rapid storage high cpu usage

Similar Messages

Maybe you are looking for