Intel SSD Toolbox work with T510?

I recently swapped in an Intel 320 series 300gb SSD in my T510. The drive works great, and Windows recognizes it as an Intel SSDSA2CW300G3. But the Intel SSD Toolbox application doesn't see the drive (or any drive, since that's the only one in the system). I've tried the usual uninstall/reinstall, reboot routines, with no effect. A post somewhere suggested that turning off ACHI in bios might help, but when I did that, Windows wouldn't boot.
I have the same Intel SSD on my desktop, and the Toolbox application works fine there. Both are Win7-64 machines, and in device manager, both show the same Microsoft driver (6.1.7600.16385) and the same hardware ids for the drives.
Does anyone know if the Intel app works on a T510?

I tried Intel’s online chat support and encountered a helpful tech who took me through updating drivers and trying a couple of other pieces of software. It turns out that Intel’s Rapid Storage Technology applet sees the drive fine. So does SSDLife Free, which assures me that my drive is in excellent health, should last until 2020, and has Trim enabled. But even though no other app has a problem seeing the drive, and I have new drivers and an updated Lenovo bios in my T510, Intel SSD Toolbox still can’t see anything on my system. For the moment, I’ll just live without Toolbox.

Similar Messages

Intel SSD Toolbox does not report expected life remaining of SSD drive

I am trying to figure out expected life remaining of my INTEL SSDSA2BW160G3L on my X220T with Intel Core i7-2640M CPU 2.80GHz and 8GM of RAM, running Win7 64bit. I have been using my X220T for over a year. It is my only computer, so it has been used continously for a year.
Yesterday I installed the Itel SSD Toolbok 3.1.5 to check my SSD drive. Although the SMART Details provide me with the raw data, the normalized scores are all 100%. The expected life remaining shown is 100%, which does not seem to make much sense after a year of use.
I ran the Lenovo Hard Drive Quick Test (http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS025445). The SMART seems to be enable and working.
I would like to know if the Intel SSD Toolbox is working properly.

billbolton wrote:
SSDs do not "wear" in the same way that a mechanical drive does. There is nothing abnormal in an SSD showing no effective wear in terms of SMART parameters after a year of typical use.
In terms of determining remaining life, SMART parameters are really only useful for that when a drive (of any sort) is starting to get near the end of its life.
Cheers,
Bill
Bill,
Are you implying there is no need for garbage collection or wear-leveling after a year or that the SSD and/or OS take care of garbage collection and wear-leveling so the user won't notice the difference after a year?
Helix: 3697 CTO.
Thinkpad user since IBM. I do not work for Lenovo or any entity working for Lenovo.

Can ECM work with T510?

I am implementing ECM in an organization where they have their salary structure in Pay Scale (T510). The organization is not ready for migration to T710. Can ECM run on T510? I need this information ASAP as we are in a critical phase.
Thanks and regards,
Sanjoy

Hi,
Please let me update this post (in time).
The problem is not using T710 or T510, however you must thing about Inditect or Direct valuation.
In the direct valuation the amounts are saved in table PA0008 from infotype 0008 and could be read by ECM.
In the indirect valuation the amounts are stored in tabele T510, T528C, T511k, etc, and cannot be read by ECM without a enhancement. Is very common work with INVAL through T510 but it is not exclusive.
You must implement the Badi HRECM00_ACTIVATION to work with indirect valuation.
You must use this Badi too, if you consider a salary increase for multiples waretypes.
Regards,
Eduardo Marcelino

Intel Browser that works with Yahoo Videos

has anyone have an idea of a browser that might work with the Yahoo video services? eg: "launch.com".

Perhaps try these settings:
How do I configure Firefox to view news video?
First, since the Yahoo! News Video Player appears in a pop-up window, you'll need to allow Yahoo! to open pop-ups from your browser.
Note: Yahoo! and Yahoo! News do not use pop-up advertising of any kind, so the only windows you see will be content windows selected by you, such as video.
Follow these steps to enable pop-ups from Yahoo!:
1. Open Firefox.
2. Click "Firefox/Preferences..."
3. In the newly opened window, select "Content".
4. Make sure there's a check next to "Block Pop-Up Windows," so you can continue to block pop-up ads.
5. Click the "Allowed Sites" button. Here, you can specify which web sites will be allowed to open pop-up windows from your browser.
6. In the Address of Web Site field, enter: http://news.yahoo.com
(and/or http://video.yahoo.com/?fr=news1)
7. Click "Allow," then close the window.
8. Close the main Preferences window.
You should now be able to view video from Yahoo! News and/or Yahoo Video.
You also may need to configure JavaScript to view news video. Follow these steps:
1. Click "Firefox/Preferences..."
2. Select "Content"
3. Make sure that "Enable Java" and "Enable JavaScript" are both checked. If they're not, check them both.
5. Close the main Preferences window.
iMac Intel Core 2 Duo 20" Mac OS X (10.4.8) 1 GB ram
Message was edited by: Doc Spider

Cannot get any SSD to work with my mid 2012 13 inch macbook pro!! PLEASE HELP!

I have tried over and over and NO ssd seems to work. All I get is a blank screen. This is very strange because I had a 128gb crucial m4 running firmware 000f for about 8 months before I decided to upgrade and never had a problem with it, not a single beach ball. Now when I decide to upgrade the 128gb m4 with a 256 m4, I run into problems. I returned the 256 m4 thinking that the drive was defective, and I purchased a Samsung 840 250gb to see if I would have any luck with that one. NOPE. Still didnt work. As a last resort I went with the intel 520 240gb, and still nothing. Im extremely puzzled by this. Especially since I was alredy running a ssd on my machine prior to deciding to upgrade. ALL the ssd's I tried were brand new and sealed and the method for installing the OS on them was by using carbon copy cloner. Anybody know whats going on? Anybody else experiencing/experienced the same?? Did I ruin my mac?? Right now I am using a Western Digital scorpio black 7200rpm 500gb hard drive and it works just fine. The problem seems to happen only when I decide to upgrade to a ssd. Oh, and by the way, I am running Mountain lion 10.8.3

I'm running 10.8.3 with a 512GB Crucial m4 SSD and having no problems. It sounds as if you've a problem with your SATA cable, which will rear its ugly head more often with SSDs than with hard drives.
If I were you, I'd order a new SATA cable (from ifixit or PowerBookMedic or maybe even OWC). Then try out a new SSD. See if your problems are fixed then.
Clinton

HP TM2 SSD install worked (with problem)

i have hp tm2 2150st and Corsair f120 SSD. i install windows 7 a few times on it . Operating system installed and notebook worked. but when i start, my tm2's fan worked full speed and very noisy, and stop only when shutdown notebook, not even restart. When notebook works on this condition, i looked at device manager and see "intel management engine interface" problem. i install driver over and over but problem never changed. Also i use AIDA64 software for notebook condition and see motherboard temperature is 88 °C.
Then i install original 320 GB HDD and reinstal windows, it worked fine.
I read some TM2 owners post , who use ssd (with some problem cold boot etc.) but didnt see any report like this. so what is my problem, hardware or only ssd incompability.
P.S. : I update BIOS,Chipset etc. drivers
LAST: Today problem continue altough my original HDD in notebook. so i'll send it to customer service.

obsatsk wrote:
... imean when i puch the drive to fit in its place its only going the half way from the headers . ...
Hi,
Do you mean physically ? If they are same size, should fit, I can not touch to your machine therefore can not help. Just try it slowly.
Regards
ps. I have not replaced any HDD on laptop/PC but hundreds on other platforms.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

A30 and Intel 2200BG now working with Scotch tape!!

I searched and read, and didn't believe what I read, but with the aid of a little sliver of Scotch tape over pins 11 and 13 I am up and running.
For 3 weeks I have fought this one, Intel support have only replied once to tell me to download the latest SW version, which I had already told them I had.
I mistakenly was under the impression that the pin assignment for Mini PCI cards had been agreed and was standard. So who is rocking the boat Intel or Toshiba? My initial impression is Intel as a search for "2200BG" throws up many cases of problems and not all Toshiba models.
However I suggest anyone who is having problems with the 2200BG Mini PCI card try the high tech bit of scotch tape method first.
BTW the wireless switch or the fn + F8 still does not work.

Hi Alison
The fact is that this Intel card is a part of Centrino concept and many notebook producers use this at own units. A few days ago I was I electronic store and I have looked into device manager of many notebooks (different manufacturers) and almost all of them have this card.
The fact is that notebook producers can not do much. In my opinion Intel should test and check functionality at first. If you check Intel download page there are many newer drivers for this card and I believe that Intel try to make it better. We will see.

Xf86-video-intel not not working with intel 82852/855GM graphics card

I am runing arch linux on a toshiba satilite r15 s829 and have the xf86-video-intel driver installed but Xorg does mot seem to be able to use it with my intel graphics card.
output of lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
01:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 83)
01:0b.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
01:0b.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
01:0b.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
xorg onfig file: 10-monitor.conf
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
#Option "RandRRotation" "true"
VendorName "Intel Corp."
BoardName "82852/855GM Integrated Graphics Device"
EndSection
Section "Screen"
Identifier "Screen0" #Collapse Monitor and Device section to Screen section
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24 #Choose the depth (16||24)
#Option "RandRRotation" "true"
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Xorg log file: Xorg.0.log
[ 2900.308]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[ 2900.308] X Protocol Version 11, Revision 0
[ 2900.308] Build Operating System: Linux 2.6.37-ARCH i686
[ 2900.308] Current Operating System: Linux dragonL 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 25 09:07:57 UTC 2011 i686
[ 2900.309] Kernel command line: BOOT_IMAGE=(hd0,msdos1)//boot/vmlinuz26 root=/dev/disk/by-uuid/0cfdcd8b-eae7-4dbd-8dd6-0ff955089587 rootfstype=ext2 ro nomodeset add_efi_memmap
[ 2900.309] Build Date: 04 February 2011 09:39:45PM
[ 2900.309]
[ 2900.309] Current version of pixman: 0.20.2
[ 2900.309] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2900.309] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2900.310] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 25 12:15:42 2011
[ 2900.310] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2900.310] (==) No Layout section. Using the first Screen section.
[ 2900.310] (**) |-->Screen "Screen0" (0)
[ 2900.310] (**) | |-->Monitor "Monitor0"
[ 2900.311] (**) | |-->Device "Card0"
[ 2900.311] (==) Automatically adding devices
[ 2900.311] (==) Automatically enabling devices
[ 2900.311] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2900.311] Entry deleted from font path.
[ 2900.311] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2900.311] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2900.311] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2900.311] (II) Loader magic: 0x81f3040
[ 2900.311] (II) Module ABI versions:
[ 2900.311] X.Org ANSI C Emulation: 0.4
[ 2900.311] X.Org Video Driver: 8.0
[ 2900.311] X.Org XInput driver : 11.0
[ 2900.311] X.Org Server Extension : 4.0
[ 2900.312] (--) PCI:*(0:0:2:0) 8086:3582:1179:0037 rev 2, Mem @ 0xd8000000/134217728, 0xd0000000/524288, I/O @ 0x0000eff8/8
[ 2900.312] (--) PCI: (0:0:2:1) 8086:3582:1179:0037 rev 2, Mem @ 0x40000000/134217728, 0x4c000000/524288
[ 2900.312] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2900.312] (II) LoadModule: "extmod"
[ 2900.312] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2900.312] (II) Module extmod: vendor="X.Org Foundation"
[ 2900.312] compiled for 1.9.4, module version = 1.0.0
[ 2900.312] Module class: X.Org Server Extension
[ 2900.312] ABI class: X.Org Server Extension, version 4.0
[ 2900.312] (II) Loading extension MIT-SCREEN-SAVER
[ 2900.312] (II) Loading extension XFree86-VidModeExtension
[ 2900.312] (II) Loading extension XFree86-DGA
[ 2900.312] (II) Loading extension DPMS
[ 2900.312] (II) Loading extension XVideo
[ 2900.312] (II) Loading extension XVideo-MotionCompensation
[ 2900.312] (II) Loading extension X-Resource
[ 2900.312] (II) LoadModule: "dbe"
[ 2900.312] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2900.313] (II) Module dbe: vendor="X.Org Foundation"
[ 2900.313] compiled for 1.9.4, module version = 1.0.0
[ 2900.313] Module class: X.Org Server Extension
[ 2900.313] ABI class: X.Org Server Extension, version 4.0
[ 2900.313] (II) Loading extension DOUBLE-BUFFER
[ 2900.313] (II) LoadModule: "glx"
[ 2900.313] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2900.313] (II) Module glx: vendor="X.Org Foundation"
[ 2900.313] compiled for 1.9.4, module version = 1.0.0
[ 2900.313] ABI class: X.Org Server Extension, version 4.0
[ 2900.313] (==) AIGLX enabled
[ 2900.313] (II) Loading extension GLX
[ 2900.313] (II) LoadModule: "record"
[ 2900.313] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2900.313] (II) Module record: vendor="X.Org Foundation"
[ 2900.313] compiled for 1.9.4, module version = 1.13.0
[ 2900.313] Module class: X.Org Server Extension
[ 2900.313] ABI class: X.Org Server Extension, version 4.0
[ 2900.313] (II) Loading extension RECORD
[ 2900.313] (II) LoadModule: "dri"
[ 2900.313] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2900.314] (II) Module dri: vendor="X.Org Foundation"
[ 2900.314] compiled for 1.9.4, module version = 1.0.0
[ 2900.314] ABI class: X.Org Server Extension, version 4.0
[ 2900.314] (II) Loading extension XFree86-DRI
[ 2900.314] (II) LoadModule: "dri2"
[ 2900.314] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2900.314] (II) Module dri2: vendor="X.Org Foundation"
[ 2900.314] compiled for 1.9.4, module version = 1.2.0
[ 2900.314] ABI class: X.Org Server Extension, version 4.0
[ 2900.314] (II) Loading extension DRI2
[ 2900.314] (II) LoadModule: "intel"
[ 2900.314] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2900.314] (II) Module intel: vendor="X.Org Foundation"
[ 2900.314] compiled for 1.9.4, module version = 2.14.0
[ 2900.314] Module class: X.Org Video Driver
[ 2900.314] ABI class: X.Org Video Driver, version 8.0
[ 2900.314] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 2900.314] (--) using VT number 7
[ 2900.324] (EE) No devices detected.
[ 2900.324]
Fatal server error:
[ 2900.324] no screens found
[ 2900.324]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2900.324] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2900.324]

Please use [ code ] tags for pasting code https://bbs.archlinux.org/help.php#bbcode as it makes your posts much easier to read.
There's a problem with old Intel cards and the current Intel drivers. Unfortunately using older drivers means downgrading xorg-server and friends. Read about downgrading in the wiki.
I'm currently using xf86-video-intel 2.13.0-4 and xorg-server 1.9.4-1 and things are OK. My card
[karol@black ~]$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Last edited by karol (2011-04-25 21:16:37)

How do I configure my new SSD to work with my iMac?

I just installed a new 4TB Seagate SSD in my 24" iMac (early 2009). When I turn on my computer, it starts up with an image of a folder and a question mark in the middle of the folder. How do I configure my new SSD without my original utility disks (they're currently in another state . . . in the middle of moving)? I have a drive adapter and have connected my old hard drive which allows me to run the computer, but I was unable to transfer everything from old to new using Disk Utility. Thank you so much for any help you can offer.

OK, it's not an SSD, it's an SSHD (love a set of initials) specifically it is a standard 4TB rotating drive with 8GB of SSD memory attached. Treat it just like any other drive because that is how it appears.
"After doing some reading on the internet last night, it seemed like most people said what you're saying that the disks was the preferred method. My concern is that I won't have my disks for another few weeks. Do most people prefer not to clone in order to shed some of the unwanted programs and "stuff"?"
If you want an entirely fresh installation then cloning is not the way to go, otherwise it's the best choice. If you don't have the disks it is the only way to go (with Snow Leopard anyway)
You could boot from the old drive and use it to install Mavericks on the new one if you wish.

Does the 13 inch macbook pro, retina display, 256 GB HD, 16 MB Memory, Intel Iris Graphics work with Adobe Premiere Pro CC? I'm worried about the Intel Iris Graphics

I'm thinking of buying this computer, mostly for screenwriting. But I might want to occasionally use Adobe Premiere Pro CC

not good enough. you need a 15" that has 2 graphics cards (both dedicated and discreet graphics card).

Getting intel HD4000 working with opengl 3.1

Is it possible to get the intel-dri drivers working with opengl 3.1? My glewinfo is only showing 3.0 support.

You only get 3.1 if you create a core context. It seems glewinfo doesn't do that, so 3.0 is all you'll get. Try glxinfo (it's in the mesa-demos package).

Which Intel SSD comes with W520?

Hi,
I am buying a W520 right now and wanted to know which Intel SSD (160GB) comes with the W520?
Thanks, Mike

Most likely still the X-25M.

HT6114 My CanoScan 8600F no longer works with Mavericks- No drivers available from Canon

My CanoScan 8600F no longer works with Mavericks upgrade. Canon does not offer new drivers.

The Canoscan Toolbox works with Mavericks to scan, copy, etc.
If you have Photoshop or Photoshop Elements the drivers can be installed so one can scan from within those applications.
All the necessary software (CanoScan Toolbox 5.0.1.2 Installer) can be obtained from the Canon site.
And, as Eustace mentioned, Vuescan works.
OT

Intel SSD 320 Series 8 MB Bug neue Firmware?

Hallo,
nach einem Stromausfall hat meine Intel SSD der 320er Serie den 8 MB Bug.
Sprich die SSD wird mit nur noch 8 MB erkannt.
In vielen Foren findet man die Lösung: Ein Firmware Update.
Leider ist die Festplatte von Lenovo, daher geht die original Intel Firmware nicht.
Auf der Lenovo Support Webseite findet man die aktuelle Firmware Version nicht.
Ich habe die Firmware LE05 (4PC1LE05) und brauche die Firmware LE06.
Ich habe zwei Artikel gefunden, die auf die LE06 Firmware verweisen, leider gehen die Downloads nicht mehr, weil Lenovo die Webseitenstruktur geändert hat:
http://support.lenovo.com/in/hi/documents/ht074473
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-SSD-8MB-Error-on-Current-4PC1LE04-Firm...
Ich habe schon den telefonischen Lenovo Support angerufen, aber die konnten mir nicht weiter helfen.
Wo bekomme ich jetzt die neue Firmware LE06 her?
SSD Modell: SSDSA2BW160G3L
Notebook: T420s

Ich konnte das Problem jetzt ohne neue Firmware lösen.
Ich habe die Intel SSD Toolbox installiert: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18455
In der Toolbox habe ich Secure Erase ausgeführt. Nach einem Neustart hat die SSD jetzt wieder ihre 160 GB.
Die Daten sind zwar weg, aber man hat ja ein Backup.
Die LE06 Firmware wäre trotzdem super, damit beim nächsten Stromausfall nicht das gleiche passiert!

Will a 510 intel SSD work with MacBook Pro?

Coulnd't find anyone who has tried this. I am trying to update my crappy harddrive which is on the edge of dying and want to go SSD to speed up the performance and boot times.
Will an intel 510 series SSD work with my 2.4GHz intel core duo / DDr3 15.4" (late 2008) model.

http://support.apple.com/kb/HT3382?viewlocale=en_US#11
11. How is the Apple Mini DisplayPort to Dual-Link DVI adapter different from the Apple Mini DisplayPort to DVI adapter?
The Apple Mini DisplayPort to Dual-Link DVI adapter works best with displays that operate at dual-link resolutions, which are resolutions above 1920 x 1200. For displays that do not support dual-link DVI resolutions (displays that operate at resolutions of 1920 x 1200 or lower) you should use the Apple Mini DisplayPort to DVI adapter instead.
12. Which monitors work with the Apple Mini DisplayPort to Dual-Link DVI adapter?
Use the Mini DisplayPort to Dual-Link DVI Adapter to connect your computer to a 30-inch display that includes a dual-link DVI connector, such as the Apple Cinema HD Display. Note: For such displays, be sure to connect the USB connection on the adapter to the USB port on your Mac; also connect the USB connection from the display to the USB port on the adapter.

Intel SSD Toolbox work with T510?

Similar Messages

Maybe you are looking for