Intel usb 3,0 extensible host controller driver not working

I have a hp envy sleekbook 6 1100se. 
Im facing a problem with the driver of usb 3.0 extensible host controller 0100 microsoft. It says that the device cannot start. gives a CODE 10 error.  Im using windows 8. i've tried updating it and uninstalling and reinstalling it but it doesnt help. I've restored the laptop to its factory settings and then for like 10 minutes the usb 3 ports worked fine and so did the driver. but i restarted my pc and again it gave me error code 10. Its also got something to do with the date of the computer. in the events of the driver it said device started in the date 8/28/2012. but after i changed the date it stopped working. but now this fix doesnt work when the second time i reset my computer. 
i also know its not a hardware fault because when i plug in my usb in the usb 3 port, the device turns on its light which means that its working. put the computer does not open it or detect the usb drive. 
Help please. ! 

Hi,
Please use the following post:
    http://h30434.www3.hp.com/t5/forums/replypage/board-id/General/message-id/76373
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Sat. A300 - USB ICH8 Family USB Universal Host Controller is not working

    Device: Intel(R) ICH8 Family USB Universal Host Controller - 2830 till 2836 and 283A
    Driverversion is: 8.0.0.1008
    Driverdate: 15.09.2006
    is not working!
    Can anybody help me? Where do I find the actual driver?
    Thanks in advance.
    Chris

    The Intel Chipset driver handles USB drivers. You can download it from the Toshiba Support/Drivers Website.
    But if you installed a strange USB Device recently (perhaps a USB keyboard/mouse/HDD), its driver may be conflicting. So you would need to remove that driver from Control Panel -> Program Features first, then reinstall the Intel Chipset Driver.

  • T430S device manager: USB-IF x HCI USB host controller is not working properly

    Hi ,
    How to change get ride off the exclamatory mark on this device:
    Problem:
    Device manger Intel WiUSB: USB IF x HCI USB Host Controller always has the exclamartory mark on it.
    Device status: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
    Pls help, thanks.

    Hey there wche5,
    I found some information over on this thread may be beneficial to your situation. This controller enables USB over wireless as part of the Intel (WiDi) Wireless Display function. To obtain a fix you will need to go to the Intel Site, and run the Intel Driver Update Utility. This should identify any Intel drivers you have that are out of date, including the WiDi driver.
    Other threads on the forums point directly to this driver by Intel that typically resolves the problem, found on this thread at the end.
     I hope this able to assist you in getting a solution to your issue, Thank You wche5!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • S431 USB 3.0 eXtensible Host Controller Code 10

    In Device Manager this controller has a yellow flag and the device status is "This device cannot start. (Code 10)"
    I have attempted the following:
    1. Uninstalling/Installing drivers from Lenovo Support
    http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-s-series-laptops/thinkpad-s43...
    2. Uninstalling ALL USB controllers and having Windows update them upon reboot.
    3. Hours of searching online but only seeing the same sorts of "fixes" i.e. uninstalling the controllers and ensuring I am using device specific drivers.
    Note: No pins are visibly bent or damaged in the USB port and I don't have anything plugged into them.

    Bump
    Note:
    I need advice regarding a possible "fix"
    Some forums suggest removing all power and resetting the CMOS. This would require me to open up the back and disconnect the battery.
    Will an action like this void my warranty?

  • MSI GE60 2OC Windows 7 x64 USB 3.0 eXtensible Host

    Hi,
    I have another problem with my MSI GE60.
    I have installed Windows 7 x64, updated everything and installed driver.
    At last I installed the USB 3.0 eXtensible Host Controller driver from the msi homepage. But now my usb ports aren't working anymore!
    I tried different driver and deleted them in safe mode from windows.
    Help? ...
    Thanks in advance

    I just posted a similar issue on the same machine, except my USB ports will only work under certain circumstances. It's very odd and it sounds like a driver issue... Did you ever get it sorted out?

  • Usb pci1033,e0 Enhanced Host Controller G5 PowerPC 1.8GHz

    Hi every one
    need help to sort this silly problem out
    We have a PowerPC G5 1.8 duel fitted with 8GB ram - everything works great until I ftted this USB PCI card
    We have just fitted a PCI card into it:
    usb pci1033,e0 Enhanced Host Controller (into slot 2)
    When I look at mac info it say:
    Card                                                       Type                                                    
    Driver Intalled
    pci1033,e0                                              USB Enhanced Host Controller               YES
    but under neath type it says:
    Card                                                       Type                                                    
    Driver Intalled
    usb                                                          usb                                                            No
    usb                                                          usb                                                            No
    Now since this PCI card has been fitted - The PowerPC G5 mac will not go to sleep or even shut down.
    I have ran the CONSOLE - and cleared the cash prior to asking it to go to sleep and it, when I leave it for 5 munites and move mouse the screen comes back on it says
    PROBLEM:
    mac will not go to sleep - will not shut down - just says on all night !!!!
    The Console gives me this
    Anyone know the answer:
    would be very much appricated
    thanks

    Anyone know the answer:
    Remove the offending PCI card.
    If it is a USB 2.0 PCI controller make sure it has the NEC chipset.
    ALI or VIA chipset cards will always cause problems.
    NEC chipsets are natively supported in 10.4.3 and onward.
    Do NOT install third party USB drivers. Most all cause incompatibilities.
    Read more about USB 2.0 PCI cards in PPC Macs:
    B8B574BC-BB45-4B3E-9D9B-F97EBB3230BC.html
    If it is a USB 3.0 PCI card, forget it. There is no support in PPC Macs.

  • Network controller& USB controller driver not found and wifi not working

    hello  I Purchased HP 15-ac025TX (M9V00PA) Notebook laptop  .  i have installed all driver from HP site here is the link  http://support.hp.com/in-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8326084#Z7_3054ICK0KGTE30AQO5O3KA30R1  but still netwok controller driver not found also wifi not  working  i installed blutooth drivers too . I am using window 7 sp1 (32 bit) For network controller device ID is PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 secondly  univeral serial bus driver(usb) controller   not found i installed all drivers from above link  also update windows  but still no solution hardware id of usb controller is PCI\VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03  and last i am unable to download  AMD/Intel Switchable High-Definition (HD) Graphics Driver. the download link not working KINDLY RESOLVE THE ISSUE THANK YOU    

    Update: While the driver I knew would work has not shown up yet, I did some detective work and explored some other broadcom wireless card driver folders from some HP links, and I found one that should work for you. While it says it is for HP desktop PC's, they put the exact same wireless card form factor in a desktop PC that they do in a notebook PC. I see no reason why this driver would not work, since the setup information file contains the same hardware ID that you posted.  Here is a partial copy and paste of the driver setup information file and you can see the hardware ID you posted is supported by this driver.  x86 - Win7
    [BROADCOM.NTx86.6.1]
        %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C
        %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D3103C       
        %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2232103C
        %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D4103C
        %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_149257_1

  • Probook g1 450 4th generation Intel Graphics Driver Not working

    After Updating Baios my laptop , graphics driver not working . install successfully but when    click the graphics driver icon , it's show the  massage ,GfxUiEx has stopped working .
    i am worried about it . what can i do ??
    i uninastalled driver then again install but this massage show again ,,,i use windows 8.1.
    massage is :

    @Ariful11 
    Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
    Thank you,
    Omar
    I Work for HP

  • NVIDIA driver not working on HP envy dv7

    Hi,
    i trying to install nvidia official driver to my HP envy dv7 laptop.
    Two wasted nights without success.
    I trying newest version from nvidia.com and from pacman.
    Result is same in both cases - black screen, high cpu temperatures, no video output.
    Pasted logs are from pacman version.
    Thank you for help !
    uname -a :
    $ uname -a
    Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
    lspci | grep VGA
    $ lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
    modinfo nvidia
    $modinfo nvidia
    filename: /lib/modules/3.13.5-1-ARCH/extramodules/nvidia.ko.gz
    alias: char-major-195-*
    version: 331.38
    supported: external
    license: NVIDIA
    alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
    alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
    alias: pci:v000010DEd*sv*sd*bc03sc02i00*
    alias: pci:v000010DEd*sv*sd*bc03sc00i00*
    depends: drm,i2c-core
    vermagic: 3.13.0-1-ARCH SMP preempt mod_unload modversions
    parm: NVreg_Mobile:int
    parm: NVreg_ResmanDebugLevel:int
    parm: NVreg_RmLogonRC:int
    parm: NVreg_ModifyDeviceFiles:int
    parm: NVreg_DeviceFileUID:int
    parm: NVreg_DeviceFileGID:int
    parm: NVreg_DeviceFileMode:int
    parm: NVreg_RemapLimit:int
    parm: NVreg_UpdateMemoryTypes:int
    parm: NVreg_InitializeSystemMemoryAllocations:int
    parm: NVreg_RMEdgeIntrCheck:int
    parm: NVreg_UsePageAttributeTable:int
    parm: NVreg_MapRegistersEarly:int
    parm: NVreg_RegisterForACPIEvents:int
    parm: NVreg_CheckPCIConfigSpace:int
    parm: NVreg_EnablePCIeGen3:int
    parm: NVreg_EnableMSI:int
    parm: NVreg_MemoryPoolSize:int
    parm: NVreg_RegistryDwords:charp
    parm: NVreg_RmMsg:charp
    parm: NVreg_AssignGpus:charp
    pacman -Qi nvidia
    $pacman -Qi nvidia
    Name : nvidia
    Version : 331.38-3
    Description : NVIDIA drivers for linux
    Architecture : x86_64
    URL : http://www.nvidia.com/
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : linux>=3.13 linux<3.14 nvidia-libgl nvidia-utils=331.38
    Optional Deps : None
    Required By : None
    Optional For : bumblebee
    Conflicts With : nvidia-96xx nvidia-173xx
    Replaces : None
    Installed Size : 4642.00 KiB
    Packager : Thomas Bächler <[email protected]>
    Build Date : Sun 26 Jan 2014 10:22:40 AM UTC
    Install Date : Wed 26 Feb 2014 05:45:32 PM UTC
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    nvidia-xconfig --query-gpu-info
    $nvidia-xconfig --query-gpu-info
    Number of GPUs: 1
    GPU #0:
    Name : GeForce GT 630M
    UUID : GPU-172f9afb-954f-a30c-b9e1-016f89943947
    PCI BusID : PCI:1:0:0
    Number of Display Devices: 1
    Display Device 0 (CRT-0):
    No EDID information available.
    xorg.0.log
    [ 2028.379]
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    [ 2028.394] X Protocol Version 11, Revision 0
    [ 2028.399] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 2028.407] Current Operating System: Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64
    [ 2028.407] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 2028.423] Build Date: 09 January 2014 08:47:24AM
    [ 2028.431]
    [ 2028.439] Current version of pixman: 0.32.4
    [ 2028.456] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2028.456] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2028.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 26 18:29:34 2014
    [ 2028.510] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2028.522] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2028.535] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2028.548] (==) ServerLayout "Layout0"
    [ 2028.561] (**) |-->Screen "Screen0" (0)
    [ 2028.574] (**) | |-->Monitor "Monitor0"
    [ 2028.587] (**) | |-->Device "Device0"
    [ 2028.601] (**) |-->Input Device "Keyboard0"
    [ 2028.615] (**) |-->Input Device "Mouse0"
    [ 2028.629] (==) Automatically adding devices
    [ 2028.643] (==) Automatically enabling devices
    [ 2028.658] (==) Automatically adding GPU devices
    [ 2028.673] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2028.688] Entry deleted from font path.
    [ 2028.704] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2028.721] Entry deleted from font path.
    [ 2028.738] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2028.756] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2028.774] Entry deleted from font path.
    [ 2028.792] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2028.869] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 2028.889] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2028.910] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 2028.931] (WW) Disabling Keyboard0
    [ 2028.952] (WW) Disabling Mouse0
    [ 2028.974] (II) Loader magic: 0x804c80
    [ 2028.995] (II) Module ABI versions:
    [ 2029.017] X.Org ANSI C Emulation: 0.4
    [ 2029.039] X.Org Video Driver: 15.0
    [ 2029.062] X.Org XInput driver : 20.0
    [ 2029.084] X.Org Server Extension : 8.0
    [ 2029.107] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2029.109] (--) PCI:*(0:0:2:0) 8086:0166:103c:181d rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
    [ 2029.134] (--) PCI: (0:1:0:0) 10de:0de9:103c:181d rev 161, Mem @ 0xd2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 2029.186] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 2029.213] Initializing built-in extension Generic Event Extension
    [ 2029.240] Initializing built-in extension SHAPE
    [ 2029.267] Initializing built-in extension MIT-SHM
    [ 2029.295] Initializing built-in extension XInputExtension
    [ 2029.322] Initializing built-in extension XTEST
    [ 2029.349] Initializing built-in extension BIG-REQUESTS
    [ 2029.377] Initializing built-in extension SYNC
    [ 2029.404] Initializing built-in extension XKEYBOARD
    [ 2029.432] Initializing built-in extension XC-MISC
    [ 2029.459] Initializing built-in extension SECURITY
    [ 2029.486] Initializing built-in extension XINERAMA
    [ 2029.512] Initializing built-in extension XFIXES
    [ 2029.538] Initializing built-in extension RENDER
    [ 2029.564] Initializing built-in extension RANDR
    [ 2029.589] Initializing built-in extension COMPOSITE
    [ 2029.615] Initializing built-in extension DAMAGE
    [ 2029.640] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2029.665] Initializing built-in extension DOUBLE-BUFFER
    [ 2029.688] Initializing built-in extension RECORD
    [ 2029.711] Initializing built-in extension DPMS
    [ 2029.734] Initializing built-in extension Present
    [ 2029.756] Initializing built-in extension DRI3
    [ 2029.778] Initializing built-in extension X-Resource
    [ 2029.800] Initializing built-in extension XVideo
    [ 2029.821] Initializing built-in extension XVideo-MotionCompensation
    [ 2029.842] Initializing built-in extension XFree86-VidModeExtension
    [ 2029.863] Initializing built-in extension XFree86-DGA
    [ 2029.883] Initializing built-in extension XFree86-DRI
    [ 2029.903] Initializing built-in extension DRI2
    [ 2029.923] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 2029.923] (II) LoadModule: "glx"
    [ 2029.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2029.993] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2029.993] compiled for 4.0.2, module version = 1.0.0
    [ 2030.034] Module class: X.Org Server Extension
    [ 2030.055] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
    [ 2030.076] Loading extension GLX
    [ 2030.077] (II) LoadModule: "nvidia"
    [ 2030.120] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2030.142] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2030.142] compiled for 4.0.2, module version = 1.0.0
    [ 2030.185] Module class: X.Org Video Driver
    [ 2030.207] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
    [ 2030.229] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2030.251] (II) NVIDIA X compatibility module for ABI 15.0 built from xorg-server-1.14.99.901
    [ 2030.273] (II) X log verbosity: 5
    [ 2030.315] (--) using VT number 1
    [ 2030.462] (II) Loading sub module "fb"
    [ 2030.462] (II) LoadModule: "fb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2030.462] (II) Module fb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 2030.462] (II) Loading sub module "wfb"
    [ 2030.462] (II) LoadModule: "wfb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2030.462] (II) Module wfb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (II) Loading sub module "ramdac"
    [ 2030.462] (II) LoadModule: "ramdac"
    [ 2030.462] (II) Module "ramdac" already built-in
    [ 2030.462] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 2030.462] (==) NVIDIA(0): RGB weight 888
    [ 2030.462] (==) NVIDIA(0): Default visual is TrueColor
    [ 2030.463] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2030.463] (==) NVIDIA(0): Using HW cursor
    [ 2030.463] (==) NVIDIA(0): Video key set to default value of 0x101fe
    [ 2030.463] (==) NVIDIA(0): Not mapping the primary surface by default.
    [ 2030.463] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
    [ 2030.463] (**) NVIDIA(0): Enabling 2D acceleration
    [ 2030.463] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
    [ 2030.588] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
    [ 2030.588] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 2030.589] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
    [ 2030.589] (II) NVIDIA(0): GPU UUID: GPU-172f9afb-954f-a30c-b9e1-016f89943947
    [ 2030.589] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 2030.589] (II) NVIDIA(0): Board ID: 0xce4e
    [ 2030.589] (II) NVIDIA(0): Chip SKU: 770
    [ 2030.589] (II) NVIDIA(0): Chip SKU Mod: 1
    [ 2030.589] (II) NVIDIA(0): Project: 1303
    [ 2030.589] (II) NVIDIA(0): Project SKU: 0000
    [ 2030.589] (II) NVIDIA(0): GPU RAM Type: DDR3
    [ 2030.589] (--) NVIDIA(0): VideoBIOS: 70.08.b9.00.0b
    [ 2030.589] (--) NVIDIA(0): Found 2 heads on board
    [ 2030.589] (II) NVIDIA(0): Supported display device(s): CRT-0
    [ 2030.589] (II) NVIDIA(0): Bus detected as PCI Express
    [ 2030.589] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 2030.589] (II) NVIDIA(0): SPS : 1
    [ 2030.589] (II) NVIDIA(0): User configuration of GPU PowerMizer is supported
    [ 2030.589] (II) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
    [ 2030.591] (--) NVIDIA(0): CRT-0 (boot, connected)
    [ 2030.591] (--) NVIDIA(0): CRT-0 Name Aliases:
    [ 2030.591] (--) NVIDIA(0): CRT
    [ 2030.591] (--) NVIDIA(0): CRT-0
    [ 2030.591] (--) NVIDIA(0): DPY-0
    [ 2030.591] (--) NVIDIA(0): VGA-0
    [ 2030.591] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): No EDID Available.
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- End of EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2030.591] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2030.591] (**) NVIDIA(0): all display devices.)
    [ 2030.591] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2030.591] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2030.591] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2030.591] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2030.591] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2030.593] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(0): Display device(s) assigned to X screen 0:
    [ 2030.593] (II) NVIDIA(0): CRT-0
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 2030.593] (==) NVIDIA(0): will be used as the requested mode.
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (II) NVIDIA(0): Requested modes:
    [ 2030.593] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Validated MetaModes:
    [ 2030.593] (II) NVIDIA(0): MetaMode "CRT-0:nvidia-auto-select":
    [ 2030.593] (II) NVIDIA(0): Size: 1024 x 768
    [ 2030.593] (II) NVIDIA(0): CRT-0: "nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Size : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Offset : +0 +0
    [ 2030.593] (II) NVIDIA(0): Panning
    [ 2030.593] (II) NVIDIA(0): Domain : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Tracking Area: 1024 x 768 +0 +0
    [ 2030.593] (II) NVIDIA(0): Border : 0,0,0,0
    [ 2030.593] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_60"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_56"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 640x480"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 512x384"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 400x300"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 320x240"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: nvidia-auto-select { ViewPortIn = 1024 x 576, ViewPortOut = 1024 x 576 + 0 + 96 }"
    [ 2030.596] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
    [ 2030.596] (WW) NVIDIA(0): from CRT-0's EDID.
    [ 2030.596] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 2030.596] (--) Depth 24 pixmap format is 32 bpp
    [ 2030.597] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 2030.597] (II) NVIDIA: access.
    [ 2030.599] (II) NVIDIA(0): kernel module enabled successfully
    [ 2030.599] (II) NVIDIA(0): GPU initialized
    [ 2030.599] (II) NVIDIA(0): ACPI: AC state file path: /sys/class/power_supply/ADP1/online
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is running on battery power
    [ 2030.599] (II) NVIDIA(0): ACPI: dock file path: /sys/devices/platform//dock.0/docked
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is undocked
    [ 2030.599] (II) NVIDIA(0): Registered for mobile display change hotkey events.
    [ 2030.602] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 2030.619] (II) NVIDIA(0): First mode initialized
    [ 2030.624] (==) NVIDIA(0): Using 8388608 bytes for software rendering cache
    [ 2030.629] (II) NVIDIA(0): Using built-in logo image.
    [ 2030.629] (II) NVIDIA(0): Logo is 744x537 with depth 24.
    [ 2030.641] Loading extension NV-GLX
    [ 2030.689] (II) NVIDIA(0): Initialized OpenGL Acceleration
    [ 2030.689] (II) NVIDIA(0): Visuals set up
    [ 2030.689] (II) NVIDIA(0): Pixmap depths set up
    [ 2030.690] (II) NVIDIA(0): GLX visuals set up
    [ 2030.690] (II) NVIDIA(0): Framebuffer set up
    [ 2030.690] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 2030.690] (II) NVIDIA(0): Initialized X Rendering Acceleration
    [ 2030.690] (==) NVIDIA(0): Backing store enabled
    [ 2030.690] (==) NVIDIA(0): Silken mouse enabled
    [ 2030.690] (II) NVIDIA(0): Default colormap initialized.
    [ 2030.690] (II) NVIDIA(0): Palette loaded
    [ 2030.690] (**) NVIDIA(0): DPMS enabled
    [ 2030.690] Loading extension NV-CONTROL
    [ 2030.690] Loading extension XINERAMA
    [ 2030.690] (II) NVIDIA(0): Loading NVIDIA Xinerama information
    [ 2030.690] (II) Loading sub module "dri2"
    [ 2030.690] (II) LoadModule: "dri2"
    [ 2030.690] (II) Module "dri2" already built-in
    [ 2030.690] (II) NVIDIA(0): [DRI2] Setup complete
    [ 2030.690] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 2030.690] (II) NVIDIA(0): Screen initialization complete
    [ 2030.690] (--) RandR disabled
    [ 2030.695] (II) Initializing extension GLX
    [ 2030.726] (II) XKB: Reusing cached keymap
    [ 2030.728] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2030.728] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2030.728] (II) LoadModule: "evdev"
    [ 2030.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2030.728] (II) Module evdev: vendor="X.Org Foundation"
    [ 2030.728] compiled for 1.15.0, module version = 2.8.2
    [ 2030.728] Module class: X.Org XInput Driver
    [ 2030.728] ABI class: X.Org XInput driver, version 20.0
    [ 2030.728] (II) Using input driver 'evdev' for 'Power Button'
    [ 2030.728] Option "XkbRules" "evdev"
    [ 2030.728] Option "XkbModel" "pc104"
    [ 2030.728] Option "XkbLayout" "us"
    [ 2030.728] Option "_source" "server/udev"
    [ 2030.728] Option "name" "Power Button"
    [ 2030.728] Option "path" "/dev/input/event2"
    [ 2030.728] Option "device" "/dev/input/event2"
    [ 2030.728] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.728] Option "driver" "evdev"
    [ 2030.728] (**) Power Button: always reports core events
    [ 2030.728] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2030.729] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2030.729] (--) evdev: Power Button: Found keys
    [ 2030.729] (II) evdev: Power Button: Configuring as keyboard
    [ 2030.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2030.729] (**) Option "xkb_rules" "evdev"
    [ 2030.729] (**) Option "xkb_model" "pc104"
    [ 2030.729] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2030.748] (II) No input driver specified, ignoring this device.
    [ 2030.748] (II) This device may have been added with another device file.
    [ 2030.748] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 2030.748] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event7)
    [ 2030.748] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
    [ 2030.748] (II) Using input driver 'evdev' for 'HP Truevision HD'
    [ 2030.748] Option "XkbRules" "evdev"
    [ 2030.748] Option "XkbModel" "pc104"
    [ 2030.748] Option "XkbLayout" "us"
    [ 2030.748] Option "_source" "server/udev"
    [ 2030.748] Option "name" "HP Truevision HD"
    [ 2030.748] Option "path" "/dev/input/event7"
    [ 2030.748] Option "device" "/dev/input/event7"
    [ 2030.748] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] Option "driver" "evdev"
    [ 2030.748] (**) HP Truevision HD: always reports core events
    [ 2030.748] (**) evdev: HP Truevision HD: Device: "/dev/input/event7"
    [ 2030.748] (--) evdev: HP Truevision HD: Vendor 0x5c8 Product 0x33a
    [ 2030.748] (--) evdev: HP Truevision HD: Found keys
    [ 2030.748] (II) evdev: HP Truevision HD: Configuring as keyboard
    [ 2030.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 7)
    [ 2030.748] (**) Option "xkb_rules" "evdev"
    [ 2030.748] (**) Option "xkb_model" "pc104"
    [ 2030.748] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) XKB: Reusing cached keymap
    [ 2030.749] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2030.750] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "AT Translated Set 2 keyboard"
    [ 2030.750] Option "path" "/dev/input/event0"
    [ 2030.750] Option "device" "/dev/input/event0"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2030.750] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2030.750] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2030.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
    [ 2030.750] (**) Option "xkb_rules" "evdev"
    [ 2030.750] (**) Option "xkb_model" "pc104"
    [ 2030.750] (**) Option "xkb_layout" "us"
    [ 2030.750] (II) XKB: Reusing cached keymap
    [ 2030.750] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "SynPS/2 Synaptics TouchPad"
    [ 2030.750] Option "path" "/dev/input/event10"
    [ 2030.750] Option "device" "/dev/input/event10"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2030.750] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
    [ 2030.750] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 2030.751] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2030.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.751] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 9)
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 2030.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.752] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
    [ 2030.752] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2030.752] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 2030.752] Option "XkbRules" "evdev"
    [ 2030.752] Option "XkbModel" "pc104"
    [ 2030.752] Option "XkbLayout" "us"
    [ 2030.752] Option "_source" "server/udev"
    [ 2030.752] Option "name" "HP WMI hotkeys"
    [ 2030.752] Option "path" "/dev/input/event9"
    [ 2030.752] Option "device" "/dev/input/event9"
    [ 2030.752] Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] Option "driver" "evdev"
    [ 2030.752] (**) HP WMI hotkeys: always reports core events
    [ 2030.752] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
    [ 2030.752] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 2030.752] (--) evdev: HP WMI hotkeys: Found keys
    [ 2030.752] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 2030.752] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
    [ 2030.752] (**) Option "xkb_rules" "evdev"
    [ 2030.752] (**) Option "xkb_model" "pc104"
    [ 2030.752] (**) Option "xkb_layout" "us"
    [ 2030.752] (II) XKB: Reusing cached keymap
    [ 2031.256] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.256] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.256] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.256] (**) NVIDIA(0): all display devices.)
    [ 2031.256] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.256] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.256] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.256] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.256] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.257] (II) NVIDIA(GPU-0):
    [ 2031.257] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.257] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.258] (II) NVIDIA(GPU-0):
    [ 2031.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.506] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.506] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.506] (**) NVIDIA(0): all display devices.)
    [ 2031.506] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.506] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.506] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.506] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.506] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2031.509] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.509] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2046.582] (II) evdev: HP WMI hotkeys: Close
    [ 2046.582] (II) UnloadModule: "evdev"
    [ 2046.623] (II) evdev: SynPS/2 Synaptics TouchPad: Close
    [ 2046.623] (II) UnloadModule: "evdev"
    [ 2046.663] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2046.663] (II) UnloadModule: "evdev"
    [ 2046.702] (II) evdev: HP Truevision HD: Close
    [ 2046.702] (II) UnloadModule: "evdev"
    [ 2046.741] (II) evdev: Power Button: Close
    [ 2046.741] (II) UnloadModule: "evdev"
    [ 2046.794] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 2046.795] (EE) Server terminated successfully (0). Closing log file.
    xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
    Section "Module"
    Load "glx"
    EndSection
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    # VendorName "Unknown"
    # ModelName "Unknown"
    # HorizSync 28.0 - 33.0
    # VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0"
    # Option "UseEDID" "true"
    Option "ConnectedMonitor" "DFP-0"
    # Option "CustomEDID" "CRT-0:/etc/X11/1280x1024.bin"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection

    dmesg :
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009a3befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009a3bf000-0x000000009aebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ENVY dv7 Notebook PC/181D, BIOS F.12 09/03/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25F600000 mask FFFE00000 uncachable
    [ 0.000000] 8 base 25F800000 mask FFF800000 uncachable
    [ 0.000000] 9 base 260000000 mask FE0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
    [ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
    [ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
    [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0x9a3befff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0x9a1fffff] page 2M
    [ 0.000000] [mem 0x9a200000-0x9a3befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
    [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379b0000-0x37ccffff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009affe210 0000A4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
    [ 0.000000] ACPI: FACP 000000009affb000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: DSDT 000000009afe4000 0130E0 (v01 HPQOEM 181D 00000000 ACPI 00040000)
    [ 0.000000] ACPI: FACS 000000009afb8000 000040
    [ 0.000000] ACPI: UEFI 000000009affd000 000236 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASF! 000000009affc000 0000A5 (v32 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: HPET 000000009affa000 000038 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: APIC 000000009aff9000 00008C (v03 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MCFG 000000009aff8000 00003C (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: WDAT 000000009afe3000 000224 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afe1000 001068 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 000000009afdf000 000028 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASPT 000000009afdd000 000034 (v07 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: DBGP 000000009afdc000 000034 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: FPDT 000000009afda000 000044 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MSDM 000000009afd9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd8000 000926 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd7000 000A92 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd3000 002E84 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
    [ 0.000000] NODE_DATA [mem 0x25f5f3000-0x25f5f7fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x9a3befff]
    [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
    [ 0.000000] node 0: [mem 0x100000000-0x25f5fffff]
    [ 0.000000] On node 0 totalpages: 2070351
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9799 pages used for memmap
    [ 0.000000] DMA32 zone: 627135 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22488 pages used for memmap
    [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9a3bf000-0x9aebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037979
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8068224K/8281404K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 213180K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.589 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.72 BogoMIPS (lpj=7981963)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000023] Security Framework initialized
    [ 0.000029] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000030] Yama: becoming mindful.
    [ 0.000417] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.001940] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.002614] Mount-cache hash table entries: 256
    [ 0.002739] Initializing cgroup subsys memory
    [ 0.002743] Initializing cgroup subsys devices
    [ 0.002744] Initializing cgroup subsys freezer
    [ 0.002746] Initializing cgroup subsys net_cls
    [ 0.002747] Initializing cgroup subsys blkio
    [ 0.002763] CPU: Physical Processor ID: 0
    [ 0.002764] CPU: Processor Core ID: 0
    [ 0.002768] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.003048] mce: CPU supports 9 MCE banks
    [ 0.003058] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003064] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 2
    [ 0.003142] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
    [ 0.003906] ACPI: Core revision 20131115
    [ 0.009053] ACPI: All ACPI Tables successfully acquired
    [ 0.053822] ftrace: allocating 21057 entries in 83 pages
    [ 0.061910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.094942] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.094948] TSC deadline timer enabled
    [ 0.094955] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.094960] ... version: 3
    [ 0.094960] ... bit width: 48
    [ 0.094961] ... generic registers: 4
    [ 0.094962] ... value mask: 0000ffffffffffff
    [ 0.094962] ... max period: 0000ffffffffffff
    [ 0.094963] ... fixed-purpose events: 3
    [ 0.094964] ... event mask: 000000070000000f
    [ 0.121742] x86: Booting SMP configuration:
    [ 0.135256] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.121746] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.256907] x86: Booted up 1 node, 8 CPUs
    [ 0.256909] smpboot: Total of 8 processors activated (38328.81 BogoMIPS)
    [ 0.262487] devtmpfs: initialized
    [ 0.264464] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
    [ 0.265037] RTC time: 21:55:49, date: 02/28/14
    [ 0.265063] NET: Registered protocol family 16
    [ 0.265128] cpuidle: using governor ladder
    [ 0.265129] cpuidle: using governor menu
    [ 0.265147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.265148] ACPI: bus type PCI registered
    [ 0.265150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.265197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.265199] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.282064] PCI: Using configuration type 1 for base access
    [ 0.282527] bio: create slab <bio-0> at 0
    [ 0.282615] ACPI: Added _OSI(Module Device)
    [ 0.282616] ACPI: Added _OSI(Processor Device)
    [ 0.282617] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.282618] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.285086] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.312765] ACPI Error: No handler for Region [RAM_] (ffff880253874090) [EmbeddedControl] (20131115/evregion-162)
    [ 0.312767] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
    [ 0.312770] ACPI Error: Method parse/execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/psparse-536)
    [ 0.312774] ACPI Error: Method execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/uteval-103)
    [ 0.313004] ACPI: SSDT 000000009ae3a018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.313310] ACPI: Dynamic OEM Table Load:
    [ 0.313311] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.325950] ACPI: SSDT 000000009aeada98 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.326272] ACPI: Dynamic OEM Table Load:
    [ 0.326273] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.339208] ACPI: SSDT 000000009ababd98 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 0.339508] ACPI: Dynamic OEM Table Load:
    [ 0.339509] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 1.238575] ACPI: Interpreter enabled
    [ 1.238580] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 1.238584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 1.238594] ACPI: (supports S0 S3 S4 S5)
    [ 1.238595] ACPI: Using IOAPIC for interrupt routing
    [ 1.238612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.238799] ACPI: ACPI Dock Station Driver: 1 docks/bays found
    [ 1.260983] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
    [ 1.321167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 1.321171] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.321214] \_SB_.PCI0:_OSC invalid UUID
    [ 1.321215] _OSC request data:1 1f 0
    [ 1.321218] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 1.321676] PCI host bridge to bus 0000:00
    [ 1.321678] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 1.321679] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.321680] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.321682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.321683] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 1.321688] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 1.321749] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 1.321772] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.321801] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.321826] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 1.321834] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
    [ 1.321839] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.321842] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
    [ 1.321916] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 1.321936] pci 0000:00:14.0: reg 0x10: [mem 0xd4600000-0xd460ffff 64bit]
    [ 1.322002] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.322033] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.322061] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 1.322083] pci 0000:00:16.0: reg 0x10: [mem 0xd4614000-0xd461400f 64bit]
    [ 1.322154] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.322218] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 1.322238] pci 0000:00:1a.0: reg 0x10: [mem 0xd4619000-0xd46193ff]
    [ 1.322321] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.322363] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.322390] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 1.322404] pci 0000:00:1b.0: reg 0x10: [mem 0xd4610000-0xd4613fff 64bit]
    [ 1.322466] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.322498] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.322527] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 1.322652] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.322697] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.322726] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 1.322855] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.322900] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.322929] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 1.323056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.323100] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.323125] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
    [ 1.323197] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.323232] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 1.323263] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 1.323282] pci 0000:00:1d.0: reg 0x10: [mem 0xd4618000-0xd46183ff]
    [ 1.323366] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.323407] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.323434] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 1.323584] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.323601] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
    [ 1.323608] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
    [ 1.323615] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
    [ 1.323623] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
    [ 1.323630] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
    [ 1.323637] pci 0000:00:1f.2: reg 0x24: [mem 0xd4617000-0xd46177ff]
    [ 1.323678] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.323727] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 1.323741] pci 0000:00:1f.3: reg 0x10: [mem 0xd4615000-0xd46150ff 64bit]
    [ 1.323760] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
    [ 1.323853] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
    [ 1.323862] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
    [ 1.323869] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.323875] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
    [ 1.323880] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
    [ 1.323884] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 1.323917] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.330552] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.330557] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.330562] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.330568] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.330681] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.330867] pci 0000:08:00.0: [10ec:5229] type 00 class 0xff0000
    [ 1.330931] pci 0000:08:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
    [ 1.331423] pci 0000:08:00.0: supports D1 D2
    [ 1.331424] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
    [ 1.331502] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 1.337279] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.337286] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.337294] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.337304] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.337465] pci 0000:0a:00.0: [8086:0887] type 00 class 0x028000
    [ 1.337511] pci 0000:0a:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
    [ 1.337733] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
    [ 1.337776] pci 0000:0a:00.0: System wakeup disabled by ACPI
    [ 1.343946] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.343959] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.344076] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.344094] pci 0000:0b:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.344127] pci 0000:0b:00.0: reg 0x18: [mem 0xd4404000-0xd4404fff 64bit pref]
    [ 1.344147] pci 0000:0b:00.0: reg 0x20: [mem 0xd4400000-0xd4403fff 64bit pref]
    [ 1.344234] pci 0000:0b:00.0: supports D1 D2
    [ 1.344236] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.373952] pci 0000:0b:00.0: System wakeup disabled by ACPI
    [ 1.380639] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.380647] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.380654] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.381137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381174] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381209] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381278] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381313] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381348] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381384] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381615] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 1.381620] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.381661] Found 1 acpi root devices
    [ 1.381686] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.381736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.381739] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.381740] vgaarb: loaded
    [ 1.381741] vgaarb: bridge control possible 0000:01:00.0
    [ 1.381741] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.381759] PCI: Using ACPI for IRQ routing
    [ 1.387711] PCI: pci_cache_line_size set to 64 bytes
    [ 1.387850] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
    [ 1.387851] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 1.387852] e820: reserve RAM buffer [mem 0x9a3bf000-0x9bffffff]
    [ 1.387853] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
    [ 1.387854] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
    [ 1.387910] NetLabel: Initializing
    [ 1.387911] NetLabel: domain hash size = 128
    [ 1.387912] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.387923] NetLabel: unlabeled traffic allowed by default
    [ 1.387936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.387940] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.389961] Switched to clocksource hpet
    [ 1.392856] pnp: PnP ACPI init
    [ 1.392865] ACPI: bus type PNP registered
    [ 1.392884] pnp 00:00: [dma 4]
    [ 1.392898] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.392912] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.392979] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.392999] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.393026] system 00:04: [io 0x1100-0x110f] has been reserved
    [ 1.393028] system 00:04: [io 0xffff] has been reserved
    [ 1.393029] system 00:04: [io 0xffff] has been reserved
    [ 1.393031] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 1.393032] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 1.393033] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.393035] system 00:04: [io 0x1200-0x1207] has been reserved
    [ 1.393036] system 00:04: [mem 0xfe800000-0xfe8001ff] has been reserved
    [ 1.393038] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393055] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.393085] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 1.393087] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.393126] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 1.393148] pnp 00:08: Plug and Play ACPI device, IDs SYN1e5e SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.393228] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.393230] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.393231] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.393233] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.393234] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    [ 1.393235] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.393237] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.393238] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.393239] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.393241] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
    [ 1.393242] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393419] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.393420] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.393422] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.393458] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.393478] pnp: PnP ACPI: found 12 devices
    [ 1.393479] ACPI: bus type PNP unregistered
    [ 1.399368] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 1.399417] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
    [ 1.399419] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.399420] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.399422] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.399424] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399427] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.399444] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.399447] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.399452] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.399456] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399465] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.399471] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.399482] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.399485] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.399489] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.399497] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.399499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.399500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.399501] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
    [ 1.399502] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.399503] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd3ffffff]
    [ 1.399505] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399506] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
    [ 1.399507] pci_bus 0000:08: resource 1 [mem 0xd1000000-0xd1ffffff]
    [ 1.399508] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399510] pci_bus 0000:0a: resource 1 [mem 0xd4500000-0xd45fffff]
    [ 1.399511] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
    [ 1.399512] pci_bus 0000:0b: resource 1 [mem 0xd4400000-0xd44fffff]
    [ 1.399530] NET: Registered protocol family 2
    [ 1.399642] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 1.399750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.399849] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.399860] TCP: reno registered
    [ 1.399870] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399937] NET: Registered protocol family 1
    [ 1.399946] pci 0000:00:02.0: Boot video device
    [ 1.780500] PCI: CLS 64 bytes, default 64
    [ 1.780530] Unpacking initramfs...
    [ 1.820767] Freeing initrd memory: 3200K (ffff8800379b0000 - ffff880037cd0000)
    [ 1.820771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.820773] software IO TLB [mem 0x963bf000-0x9a3bf000] (64MB) mapped at [ffff8800963bf000-ffff88009a3befff]
    [ 1.820794] Simple Boot Flag at 0x44 set to 0x1
    [ 1.820989] Scanning for low memory corruption every 60 seconds
    [ 1.821175] audit: initializing netlink socket (disabled)
    [ 1.821183] type=2000 audit(1393624549.773:1): initialized
    [ 1.830154] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.831019] zbud: loaded
    [ 1.831130] VFS: Disk quotas dquot_6.5.2
    [ 1.831155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.831254] msgmni has been set to 15764
    [ 1.831287] Key type big_key registered
    [ 1.831483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.831523] io scheduler noop registered
    [ 1.831524] io scheduler deadline registered
    [ 1.831539] io scheduler cfq registered (default)
    [ 1.831652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.832086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.832096] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.832122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 1.832123] vesafb: scrolling: redraw
    [ 1.832124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.832682] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
    [ 1.946268] Console: switching to colour frame buffer device 240x67
    [ 2.059378] fb0: VESA VGA frame buffer device
    [ 2.059386] intel_idle: MWAIT substates: 0x21120
    [ 2.059387] intel_idle: v0.4 model 0x3A
    [ 2.059387] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.059528] GHES: HEST is not enabled!
    [ 2.059562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.059853] Linux agpgart interface v0.103
    [ 2.059899] rtc_cmos 00:05: RTC can wake from S4
    [ 2.060005] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.060033] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 2.060039] Intel P-state driver initializing.
    [ 2.060046] Intel pstate controlling: cpu 0
    [ 2.060056] Intel pstate controlling: cpu 1
    [ 2.060066] Intel pstate controlling: cpu 2
    [ 2.060075] Intel pstate controlling: cpu 3
    [ 2.060081] Intel pstate controlling: cpu 4
    [ 2.060087] Intel pstate controlling: cpu 5
    [ 2.060094] Intel pstate controlling: cpu 6
    [ 2.060101] Intel pstate controlling: cpu 7
    [ 2.060170] drop_monitor: Initializing network drop monitor service
    [ 2.060205] TCP: cubic registered
    [ 2.060258] NET: Registered protocol family 10
    [ 2.060356] NET: Registered protocol family 17
    [ 2.060361] Key type dns_resolver registered
    [ 2.060562] registered taskstats version 1
    [ 2.061180] Magic number: 2:200:956
    [ 2.061210] memory memory9: hash matches
    [ 2.061260] rtc_cmos 00:05: setting system clock to 2014-02-28 21:55:50 UTC (1393624550)
    [ 2.061289] PM: Hibernation image not present or could not be loaded.
    [ 2.061821] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
    [ 2.061822] Write protecting the kernel read-only data: 8192k
    [ 2.063314] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
    [ 2.064187] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
    [ 2.070995] systemd-udevd[76]: starting version 208
    [ 2.081683] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.086896] rtsx_pci 0000:08:00.0: irq 41 for MSI/MSI-X
    [ 2.086940] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
    [ 2.087062] ACPI: bus type USB registered
    [ 2.087089] usbcore: registered new interface driver usbfs
    [ 2.087162] usbcore: registered new interface driver hub
    [ 2.087210] usbcore: registered new device driver usb
    [ 2.087615] SCSI subsystem initialized
    [ 2.087789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.087987] ehci-pci: EHCI PCI platform driver
    [ 2.088114] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.088121] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.088137] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.088526] libata version 3.00 loaded.
    [ 2.092034] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.092051] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4619000
    [ 2.103911] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.104041] hub 1-0:1.0: USB hub found
    [ 2.104046] hub 1-0:1.0: 2 ports detected
    [ 2.104210] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.104214] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.104225] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.107112] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.107123] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.108127] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.108140] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4618000
    [ 2.117274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.117508] hub 2-0:1.0: USB hub found
    [ 2.117514] hub 2-0:1.0: 2 ports detected
    [ 2.117750] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.117756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 2.117854] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 2.117873] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 2.118100] hub 3-0:1.0: USB hub found
    [ 2.118108] hub 3-0:1.0: 4 ports detected
    [ 2.118349] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.118351] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 2.118452] hub 4-0:1.0: USB hub found
    [ 2.118462] hub 4-0:1.0: 4 ports detected
    [ 2.135939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.150760] ahci 0000:00:1f.2: version 3.0
    [ 2.150968] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 2.164071] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode
    [ 2.164079] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 2.171405] scsi0 : ahci
    [ 2.171666] scsi1 : ahci
    [ 2.171894] scsi2 : ahci
    [ 2.172116] scsi3 : ahci
    [ 2.172313] scsi4 : ahci
    [ 2.172447] scsi5 : ahci
    [ 2.172504] ata1: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617100 irq 43
    [ 2.172514] ata2: DUMMY
    [ 2.172516] ata3: DUMMY
    [ 2.172517] ata4: DUMMY
    [ 2.172519] ata5: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617300 irq 43
    [ 2.172520] ata6: DUMMY
    [ 2.410959] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.491002] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.491072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.502872] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
    [ 2.502878] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.506430] ata5.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
    [ 2.512780] ata1.00: configured for UDMA/133
    [ 2.513113] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
    [ 2.524950] ata5.00: configured for UDMA/100
    [ 2.531477] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
    [ 2.534925] hub 1-1:1.0: USB hub found
    [ 2.534975] hub 1-1:1.0: 6 ports detected
    [ 2.536606] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 2.536677] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.536680] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.536701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.537540] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
    [ 2.538190] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.542465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.542469] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.542686] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 2.608731] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.651327] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 2.651588] systemd[1]: No hostname configured.
    [ 2.651596] systemd[1]: Set hostname to <localhost>.
    [ 2.653530] random: systemd urandom read with 42 bits of entropy available
    [ 2.657173] systemd-fstab-generator[151]: Checking was requested for "nas:/mnt/HD/HD_a2/STORE01", but it is not a device.
    [ 2.687501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 2.687558] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 2.687572] systemd[1]: Starting Login Prompts.
    [ 2.687585] systemd[1]: Reached target Login Prompts.
    [ 2.687595] systemd[1]: Starting Remote File Systems.
    [ 2.687605] systemd[1]: Reached target Remote File Systems.
    [ 2.687615] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 2.687642] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 2.687652] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 2.687669] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 2.687679] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 2.687712] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 2.687722] systemd[1]: Starting Delayed Shutdown Socket.
    [ 2.687759] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 2.687772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 2.687812] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 2.687822] systemd[1]: Starting Paths.
    [ 2.687832] systemd[1]: Reached target Paths.
    [ 2.687842] systemd[1]: Starting Journal Socket.
    [ 2.687878] systemd[1]: Listening on Journal Socket.
    [ 2.687895] systemd[1]: Mounting Debug File System...
    [ 2.688266] systemd[1]: Starting Journal Service...
    [ 2.688521] systemd[1]: Started Journal Service.
    [ 2.694471] usb 3-3: new full-speed USB device number 2 using xhci_hcd
    [ 2.702863] systemd-journald[157]: Vacuuming done, freed 0 bytes
    [ 2.708483] FS-Cache: Loaded
    [ 2.710845] usb 3-3: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.713390] RPC: Registered named UNIX socket transport module.
    [ 2.713392] RPC: Registered udp transport module.
    [ 2.713393] RPC: Registered tcp transport module.
    [ 2.713394] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 2.718880] FS-Cache: Netfs 'nfs' registered for caching
    [ 2.728296] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 2.741906] systemd-udevd[202]: starting version 208
    [ 2.779466] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 2.780942] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 2.780948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780952] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780955] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780958] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780963] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780966] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780969] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780971] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780973] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.782830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 2.785766] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 2.791210] ACPI: Lid Switch [LID0]
    [ 2.791504] [drm] Initialized drm 1.1.0 20060810
    [ 2.791605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 2.791609] ACPI: Power Button [PWRF]
    [ 2.792665] wmi: Mapper loaded
    [ 2.792681] hp_accel: laptop model unknown, using default axes configuration
    [ 2.797256] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 2.802959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.802966] r8169 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.803223] r8169 0000:0b:00.0: irq 46 for MSI/MSI-X
    [ 2.803494] r8169 0000:0b:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011eee000, a0:b3:cc:4b:1a:7e, XID 0c900800 IRQ 46
    [ 2.803496] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.811332] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.815328] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 2.816642] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.816644] Copyright(c) 2003-2013 Intel Corporation
    [ 2.816736] iwlwifi 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.816860] iwlwifi 0000:0a:00.0: irq 47 for MSI/MSI-X
    [ 2.817888] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 2.818258] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.818636] platform microcode: Direct firmware load failed with error -2
    [ 2.818639] platform microcode: Falling back to user helper
    [ 2.821802] iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 2.824537] tsc: Refined TSC clocksource calibration: 2394.561 MHz
    [ 2.826546] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.828014] usbcore: registered new interface driver usbhid
    [ 2.828016] usbhid: USB HID core driver
    [ 2.832266] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 2.832334] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.832373] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.832658] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
    [ 2.832662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.834846] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.834848] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.834850] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.834851] iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
    [ 2.834955] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 2.835666] usbcore: registered new interface driver snd-usb-audio
    [ 2.854044] iTCO_vendor_support: vendor-support=0
    [ 2.854466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.854514] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.854638] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.856761] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.860498] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.860514] platform microcode: Direct firmware load failed with error -2
    [ 2.860516] platform microcode: Falling back to user helper
    [ 2.863566] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.3/input/input10
    [ 2.863734] hid-generic 0003:08BB:2902.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-3/input3
    [ 2.867484] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.867498] platform microcode: Direct firmware load failed with error -2
    [ 2.867500] platform microcode: Falling back to user helper
    [ 2.870088] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870100] platform microcode: Direct firmware load failed with error -2
    [ 2.870102] platform microcode: Falling back to user helper
    [ 2.870542] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870561] platform microcode: Direct firmware load failed with error -2
    [ 2.870563] platform microcode: Falling back to user helper
    [ 2.871275] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871285] platform microcode: Direct firmware load failed with error -2
    [ 2.871288] platform microcode: Falling back to user helper
    [ 2.871938] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871949] platform microcode: Direct firmware load failed with error -2
    [ 2.871952] platform microcode: Falling back to user helper
    [ 2.872242] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.872254] platform microcode: Direct firmware load failed with error -2
    [ 2.872257] platform microcode: Falling back to user helper
    [ 2.872575] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.878423] systemd-udevd[206]: renamed network interface eth0 to eno1
    [ 2.881987] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 2.890802] systemd-journald[157]: Received request to flush runtime journal from PID 1
    [ 2.901323] systemd-udevd[217]: renamed network interface wlan0 to wlo1
    [ 2.908030] ACPI: AC Adapter [ADP1] (on-line)
    [ 2.941825] hub 2-1:1.0: USB hub found
    [ 2.941930] hub 2-1:1.0: 8 ports detected
    [ 3.021509] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 3.061674] intel_rapl: domain uncore energy ctr 8617:8617 not working, skip
    [ 3.074806] lis3lv02d: 8 bits 3DC sensor found
    [ 3.135241] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.142912] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.171642] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3.233041] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.233045] Disabling lock debugging due to kernel taint
    [ 3.238226] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
    [ 3.238279] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.238457] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
    [ 3.238462] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
    [ 3.356112] media: Linux media interface: v0.10
    [ 3.360422] Linux video capture interface: v2.00
    [ 3.365597] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:033a)
    [ 3.377291] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
    [ 3.377488] usbcore: registered new interface driver uvcvideo
    [ 3.377494] USB Video Class driver (1.1.1)
    [ 3.393157] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.400907] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.425257] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
    [ 3.458983] input: HP WMI hotkeys as /devices/virtual/input/input9
    [ 3.473371] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 3.521478] Bluetooth: Core ver 2.17
    [ 3.521492] NET: Registered protocol family 31
    [ 3.521493] Bluetooth: HCI device and connection manager initialized
    [ 3.521499] Bluetooth: HCI socket layer initialized
    [ 3.521501] Bluetooth: L2CAP socket layer initialized
    [ 3.521505] Bluetooth: SCO socket layer initialized
    [ 3.523209] usbcore: registered new interface driver btusb
    [ 3.597251] r8169 0000:0b:00.0 eno1: link down
    [ 3.597286] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
    [ 3.825665] Switched to clocksource tsc
    [ 4.034513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2055, fw id: 1107424
    [ 4.062727] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
    [ 4.071722] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071771] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071832] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071854] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071922] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071944] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.104186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
    [ 4.107557] mousedev: PS/2 mouse device common for all mice
    [ 4.326086] thermal LNXTHERM:00: registered as thermal_zone1
    [ 4.326092] ACPI: Thermal Zone [TZS0] (69 C)
    [ 4.606281] [Firmware Bug]: No valid trip found
    [ 5.280111] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
    [ 5.283560] random: nonblocking pool is initialized
    [ 5.694087] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.035020] thermal LNXTHERM:02: registered as thermal_zone2
    [ 7.035026] ACPI: Thermal Zone [TZS2] (57 C)
    [ 8.889924] thermal LNXTHERM:03: registered as thermal_zone3
    [ 8.889929] ACPI: Thermal Zone [TZS3] (30 C)
    [ 9.408442] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 10.251376] type=1006 audit(1393624558.679:2): pid=348 uid=0 old auid=4294967295 new auid=120 old ses=4294967295 new ses=1 res=1
    [ 11.338226] traps: gnome-shell[416] trap int3 ip:7f1024ce4289 sp:7fffc13c81f0 error:0
    [ 33.022441] type=1006 audit(1393624581.429:3): pid=439 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=2 res=1
    [ 33.028194] type=1006 audit(1393624581.436:4): pid=440 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=3 res=1
    lsmod
    Module Size Used by
    joydev 9631 0
    mousedev 10247 0
    btusb 19648 0
    bluetooth 326343 2 btusb
    uvcvideo 72804 0
    videobuf2_vmalloc 3304 1 uvcvideo
    videobuf2_memops 2335 1 videobuf2_vmalloc
    videobuf2_core 28243 1 uvcvideo
    videodev 111840 2 uvcvideo,videobuf2_core
    media 11719 2 uvcvideo,videodev
    nvidia 10621191 29
    intel_rapl 11776 0
    x86_pkg_temp_thermal 6991 0
    intel_powerclamp 8802 0
    coretemp 6358 0
    kvm_intel 131532 0
    kvm 396221 1 kvm_intel
    crct10dif_pclmul 4682 0
    crct10dif_common 1372 1 crct10dif_pclmul
    crc32_pclmul 2923 0
    crc32c_intel 14185 0
    ghash_clmulni_intel 4405 0
    aesni_intel 45548 0
    aes_x86_64 7399 1 aesni_intel
    lrw 3565 1 aesni_intel
    gf128mul 5858 1 lrw
    glue_helper 4417 1 aesni_intel
    ablk_helper 2004 1 aesni_intel
    cryptd 8409 3 ghash_clmulni_intel,aesni_intel,ablk_helper
    hid_generic 1153 0
    hp_wmi 7595 0
    sparse_keymap 3146 1 hp_wmi
    arc4 2000 2
    iTCO_wdt 5407 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    mxm_wmi 1467 0
    iwldvm 167738 0
    mac80211 474681 1 iwldvm
    snd_usb_audio 117811 0
    usbhid 40545 0
    snd_usbmidi_lib 19755 1 snd_usb_audio
    hid 90902 2 hid_generic,usbhid
    snd_rawmidi 18742 1 snd_usbmidi_lib
    snd_seq_device 5180 1 snd_rawmidi
    microcode 15216 0
    evdev 11045 11
    psmouse 88171 0
    snd_hda_codec_hdmi 36379 1
    iwlwifi 140193 1 iwldvm
    serio_raw 5009 0
    snd_hda_codec_idt 43508 1
    cfg80211 408199 3 iwlwifi,mac80211,iwldvm
    i2c_i801 11269 0
    rtsx_pci_ms 7258 0
    r8169 58423 0
    memstick 7504 1 rtsx_pci_ms
    rfkill 15651 4 cfg80211,hp_wmi,bluetooth
    mii 4027 1 r8169
    thermal 8556 0
    snd_hda_intel 37352 0
    snd_hda_codec 150017 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
    intel_gtt 12664 0
    drm_kms_helper 35710 0
    snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
    drm 239102 3 drm_kms_helper,nvidia
    battery 7565 0
    snd_pcm 77822 4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    ac 3334 0
    snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    hp_accel 16520 0
    i2c_algo_bit 5391 0
    mei_me 9552 0
    i2c_core 24760 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
    lis3lv02d 11283 1 hp_accel
    input_polldev 2818 1 lis3lv02d
    snd 59029 11 snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    shpchp 25425 0
    mei 62867 1 mei_me
    wmi 8251 2 hp_wmi,mxm_wmi
    video 11425 0
    soundcore 5418 1 snd
    lpc_ich 13368 0
    processor 24620 0
    button 4605 0
    nfs 191568 0
    lockd 76942 1 nfs
    sunrpc 233786 2 nfs,lockd
    fscache 47797 1 nfs
    ext4 473259 2
    crc16 1359 2 ext4,bluetooth
    mbcache 6074 1 ext4
    jbd2 80912 1 ext4
    sr_mod 14930 0
    cdrom 34880 1 sr_mod
    sd_mod 31361 3
    atkbd 16806 0
    libps2 4187 2 atkbd,psmouse
    rtsx_pci_sdmmc 13911 0
    mmc_core 95465 1 rtsx_pci_sdmmc
    ahci 23048 2
    libahci 21698 1 ahci
    libata 172104 2 ahci,libahci
    ehci_pci 3928 0
    xhci_hcd 144553 0
    ehci_hcd 64171 1 ehci_pci
    scsi_mod 132250 3 libata,sd_mod,sr_mod
    rtsx_pci 32241 2 rtsx_pci_ms,rtsx_pci_sdmmc
    usbcore 180208 8 btusb,snd_usb_audio,uvcvideo,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
    usb_common 1648 1 usbcore
    i8042 13366 1 libps2
    serio 10721 6 serio_raw,atkbd,i8042,psmouse

  • Wireless driver not working on hp 4540s after system move

    Hi there,
    I have moved my arch linux system from HP probook 4520s to  model 4540s and since then I cannot get wifi working by any reasonable means no metter  what I modprobe it wifi is alwais down:
    my lsmod:
    Module Size Used by
    xfs 666515 0
    exportfs 3005 1 xfs
    jfs 161905 0
    isofs 28679 1
    fuse 60090 3
    tun 12040 2
    dm_mod 60338 2
    snd_hda_codec_hdmi 21248 1
    i915 388194 3
    snd_hda_codec_idt 47704 1
    radeon 781081 0
    ttm 46507 1 radeon
    uvcvideo 60829 0
    coretemp 4702 0
    videobuf2_vmalloc 1896 1 uvcvideo
    videobuf2_memops 1594 1 videobuf2_vmalloc
    crc32c_intel 1487 0
    videobuf2_core 18103 1 uvcvideo
    i2c_algo_bit 4615 2 i915,radeon
    drm_kms_helper 29203 2 i915,radeon
    videodev 73819 1 uvcvideo
    joydev 7695 0
    hp_wmi 6602 0
    sparse_keymap 2532 1 hp_wmi
    aesni_intel 9101 0
    r8169 42786 0
    mcs7830 5195 0
    acpi_cpufreq 5141 0
    media 8321 2 uvcvideo,videodev
    snd_hda_intel 20208 3
    aes_i586 6940 1 aesni_intel
    aes_generic 26054 2 aesni_intel,aes_i586
    snd_hda_codec 80733 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
    cryptd 7357 1 aesni_intel
    usbnet 13158 1 mcs7830
    pcspkr 1455 0
    microcode 8825 0
    jmb38x_ms 7225 0
    snd_hwdep 4746 1 snd_hda_codec
    mii 3439 3 r8169,mcs7830,usbnet
    drm 170883 6 ttm,i915,drm_kms_helper,radeon
    snd_pcm 61237 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    i2c_core 16653 6 drm,i915,drm_kms_helper,i2c_algo_bit,radeon,videodev
    memstick 5616 1 jmb38x_ms
    mperf 1023 1 acpi_cpufreq
    iTCO_wdt 10705 0
    container 1929 0
    battery 5085 0
    thermal 6563 0
    video 9883 1 i915
    wmi 7259 1 hp_wmi
    psmouse 70891 0
    serio_raw 3709 0
    iTCO_vendor_support 1545 1 iTCO_wdt
    snd_page_alloc 5869 2 snd_pcm,snd_hda_intel
    processor 23783 5 acpi_cpufreq
    ac 1796 0
    snd_timer 14902 1 snd_pcm
    snd 44426 13 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 4378 1 snd
    button 3614 1 i915
    hp_accel 15220 0
    lis3lv02d 8969 1 hp_accel
    mei 27671 0
    input_polldev 2142 1 lis3lv02d
    intel_agp 8752 1 i915
    intel_gtt 11229 3 i915,intel_agp
    agpgart 21967 4 drm,ttm,intel_agp,intel_gtt
    evdev 7630 16
    rt2800pci 7993 0
    rt2800lib 39307 1 rt2800pci
    rt2x00pci 4255 1 rt2800pci
    rt2x00lib 31844 3 rt2x00pci,rt2800lib,rt2800pci
    eeprom_93cx6 1707 1 rt2800pci
    mac80211 341172 3 rt2x00lib,rt2x00pci,rt2800lib
    cfg80211 147461 2 mac80211,rt2x00lib
    rfkill 12568 3 cfg80211,hp_wmi
    crc_ccitt 1095 1 rt2800lib
    autofs4 19415 2
    ext4 385248 2
    crc16 1091 1 ext4
    jbd2 62437 1 ext4
    mbcache 4345 1 ext4
    usbhid 31733 0
    hid 67113 1 usbhid
    sr_mod 13180 1
    sd_mod 26959 5
    cdrom 30472 1 sr_mod
    ahci 17913 5
    libahci 16779 1 ahci
    libata 146119 2 ahci,libahci
    scsi_mod 112573 3 libata,sd_mod,sr_mod
    sdhci_pci 8877 0
    ehci_hcd 35926 0
    xhci_hcd 71768 0
    sdhci 20618 1 sdhci_pci
    mmc_core 72774 2 sdhci,sdhci_pci
    usbcore 123297 7 uvcvideo,mcs7830,ehci_hcd,usbhid,usbnet,xhci_hcd
    usb_common 622 1 usbcore
    my dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Linux version 3.4.5-424.1-bfs (mulan@HP4520sNotebook) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Mon Jul 23 04:23:36 CEST 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
    [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040005000 - 00000000a8cf2000 (usable)
    [ 0.000000] BIOS-e820: 00000000a8cf2000 - 00000000a9ebd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000a9ebd000 - 00000000a9fbd000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000a9fbd000 - 00000000a9fff000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000a9fff000 - 00000000aa000000 (usable)
    [ 0.000000] BIOS-e820: 00000000aa000000 - 00000000af200000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000014fe00000 (usable)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ProBook 4540s/17F6, BIOS 68IRR Ver. F.32 11/06/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0xaa000 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FE0000000 write-back
    [ 0.000000] 3 base 0A0000000 mask FF8000000 write-back
    [ 0.000000] 4 base 0A8000000 mask FFE000000 write-back
    [ 0.000000] 5 base 0AA000000 mask FFF000000 uncachable
    [ 0.000000] 6 base 100000000 mask FC0000000 write-back
    [ 0.000000] 7 base 140000000 mask FE0000000 write-back
    [ 0.000000] 8 base 150000000 mask FF0000000 uncachable
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 379d8000 - 37ce4000
    [ 0.000000] Allocated new RAMDISK: 374f2000 - 377fd8bc
    [ 0.000000] Move RAMDISK from 00000000379d8000 - 0000000037ce38bb to 374f2000 - 377fd8bb
    [ 0.000000] ACPI: RSDP 000f2f10 00024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT a9ffe120 00084 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
    [ 0.000000] ACPI: FACP a9ffc000 0010C (v05 HPQOEM 17F6 0000000F HP 00000001)
    [ 0.000000] ACPI: DSDT a9fd5000 2116E (v02 HPQOEM 17F6 00000001 INTL 20110112)
    [ 0.000000] ACPI: FACS a9eb2000 00040
    [ 0.000000] ACPI: HPET a9ffb000 00038 (v01 HPQOEM 17F6 00000001 HP 00000001)
    [ 0.000000] ACPI: APIC a9ffa000 000BC (v01 HPQOEM 17F6 00000001 HP 00000001)
    [ 0.000000] ACPI: MCFG a9ff9000 0003C (v01 HPQOEM 17F6 00000001 HP 00000001)
    [ 0.000000] ACPI: ASF! a9ff8000 000A5 (v32 HPQOEM 17F6 00000001 HP 00000001)
    [ 0.000000] ACPI: SSDT a9fd2000 002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
    [ 0.000000] ACPI: SSDT a9fd1000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
    [ 0.000000] ACPI: FPDT a9fcf000 00044 (v01 HPQOEM 17F6 00000001 HP 00000001)
    [ 0.000000] ACPI: BGRT a9fce000 00038 (v00 HPQOEM 17F6 00000001 HP 00000001)
    [ 0.000000] ACPI: SSDT a9fcd000 009B6 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT a9fcc000 00AAD (v01 PmRef CpuPm 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT a9fcb000 00B50 (v01 SgRef SgTabl 00001000 INTL 20110112)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1832MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x000aa000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009d
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040004
    [ 0.000000] 0: 0x00040005 -> 0x000a8cf2
    [ 0.000000] 0: 0x000a9fff -> 0x000aa000
    [ 0.000000] On node 0 totalpages: 690815
    [ 0.000000] free_area_init_node: node 0, pgdat c150c140, node_mem_map f5fb1200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3949 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 220974 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 3665 pages used for memmap
    [ 0.000000] HighMem zone: 460451 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] Allocating PCI resources starting at af200000 (gap: af200000:30e00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5f3d000 s30272 r0 d22976 u53248
    [ 0.000000] pcpu-alloc: s30272 r0 d22976 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 685374
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-bfs root=UUID=4d97ab7a-4550-4ad8-a01f-0ba29eadc523 ro resume=/dev/sda5 pcie_aspm=force
    [ 0.000000] PCIe ASPM is forcibly enabled
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] allocated 5570432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:000aa000)
    [ 0.000000] Memory: 2724980k/2785280k available (3748k kernel code, 38280k reserved, 1458k data, 524k init, 1856464k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc1516000 - 0xc1599000 ( 524 kB)
    [ 0.000000] .data : 0xc13a9177 - 0xc1515b40 (1458 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc13a9177 (3748 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:2304 nr_irqs:744 16
    [ 0.000000] CPU 0 irqstacks, hard=f540a000 soft=f540c000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2594.268 MHz processor.
    [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.72 BogoMIPS (lpj=8647560)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000021] Security Framework initialized
    [ 0.000025] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000035] Mount-cache hash table entries: 512
    [ 0.000171] Initializing cgroup subsys memory
    [ 0.000176] Initializing cgroup subsys devices
    [ 0.000178] Initializing cgroup subsys freezer
    [ 0.000179] Initializing cgroup subsys net_cls
    [ 0.000181] Initializing cgroup subsys blkio
    [ 0.000203] CPU: Physical Processor ID: 0
    [ 0.000204] CPU: Processor Core ID: 0
    [ 0.000208] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.000209] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.000897] mce: CPU supports 7 MCE banks
    [ 0.000907] CPU0: Thermal monitoring enabled (TM1)
    [ 0.000912] using mwait in idle threads.
    [ 0.001669] ACPI: Core revision 20120320
    [ 0.060127] ftrace: allocating 16715 entries in 33 pages
    [ 0.067784] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.068208] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.101152] CPU0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz stepping 09
    [ 0.206628] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.206633] ... version: 3
    [ 0.206634] ... bit width: 48
    [ 0.206635] ... generic registers: 4
    [ 0.206636] ... value mask: 0000ffffffffffff
    [ 0.206637] ... max period: 000000007fffffff
    [ 0.206638] ... fixed-purpose events: 3
    [ 0.206639] ... event mask: 000000070000000f
    [ 0.206748] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.226603] CPU 1 irqstacks, hard=f5562000 soft=f5564000
    [ 0.226606] Booting Node 0, Processors #1
    [ 0.236841] Initializing CPU#1
    [ 0.240418] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.240484] CPU 2 irqstacks, hard=f55a2000 soft=f55a4000
    [ 0.240485] #2
    [ 0.250779] Initializing CPU#2
    [ 0.254389] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.254442] CPU 3 irqstacks, hard=f55b0000 soft=f55b2000
    [ 0.254444] #3
    [ 0.264737] Initializing CPU#3
    [ 0.268347] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.268367] Brought up 4 CPUs
    [ 0.268368] Total of 4 processors activated (20762.90 BogoMIPS).
    [ 0.271569] devtmpfs: initialized
    [ 0.271707] PM: Registering ACPI NVS region [mem 0xa9ebd000-0xa9fbcfff] (1048576 bytes)
    [ 0.272405] NET: Registered protocol family 16
    [ 0.272510] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.272512] ACPI: bus type pci registered
    [ 0.272560] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.272563] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.272564] PCI: Using MMCONFIG for extended config space
    [ 0.272565] PCI: Using configuration type 1 for base access
    [ 0.272661] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.272662] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.272663] mtrr: corrected configuration.
    [ 0.272972] bio: create slab <bio-0> at 0
    [ 0.273008] ACPI: Added _OSI(Module Device)
    [ 0.273009] ACPI: Added _OSI(Processor Device)
    [ 0.273010] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.273012] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.274547] ACPI: EC: Look up EC in DSDT
    [ 0.276338] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.287685] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.298171] ACPI: SSDT a9eb0018 00861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.298561] ACPI: Dynamic OEM Table Load:
    [ 0.298563] ACPI: SSDT (null) 00861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.298735] ACPI: SSDT a9eb1a98 00303 (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.299145] ACPI: Dynamic OEM Table Load:
    [ 0.299147] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.301064] ACPI: SSDT a9eafd98 00119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 0.301447] ACPI: Dynamic OEM Table Load:
    [ 0.301449] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 1.783250] ACPI: Interpreter enabled
    [ 1.783259] ACPI: (supports S0 S3 S4 S5)
    [ 1.783275] ACPI: Using IOAPIC for interrupt routing
    [ 1.784278] ACPI: Power Resource [APPR] (off)
    [ 1.787223] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 1.787379] ACPI: No dock devices found.
    [ 1.787384] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.787878] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.788268] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 1.788270] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 1.788272] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 1.788274] pci_root PNP0A08:00: host bridge window [mem 0xaf200000-0xdfffffff]
    [ 1.788276] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff]
    [ 1.788278] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
    [ 1.788306] PCI host bridge to bus 0000:00
    [ 1.788307] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.788309] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.788311] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.788312] pci_bus 0000:00: root bus resource [mem 0xaf200000-0xdfffffff]
    [ 1.788314] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
    [ 1.788316] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
    [ 1.788323] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 1.788356] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 1.788384] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.788403] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 1.788413] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
    [ 1.788419] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.788424] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
    [ 1.788473] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 1.788494] pci 0000:00:14.0: reg 10: [mem 0xd0a00000-0xd0a0ffff 64bit]
    [ 1.788565] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.788587] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 1.788610] pci 0000:00:16.0: reg 10: [mem 0xd0a14000-0xd0a1400f 64bit]
    [ 1.788686] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.788719] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 1.788739] pci 0000:00:1a.0: reg 10: [mem 0xd0a19000-0xd0a193ff]
    [ 1.788830] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.788856] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 1.788870] pci 0000:00:1b.0: reg 10: [mem 0xd0a10000-0xd0a13fff 64bit]
    [ 1.788939] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.788960] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 1.789039] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.789065] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
    [ 1.789143] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 1.789168] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 1.789246] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.789272] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
    [ 1.789351] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.789381] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 1.789401] pci 0000:00:1d.0: reg 10: [mem 0xd0a18000-0xd0a183ff]
    [ 1.789491] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.789516] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 1.789640] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 1.789659] pci 0000:00:1f.2: reg 10: [io 0x4068-0x406f]
    [ 1.789667] pci 0000:00:1f.2: reg 14: [io 0x4074-0x4077]
    [ 1.789675] pci 0000:00:1f.2: reg 18: [io 0x4060-0x4067]
    [ 1.789683] pci 0000:00:1f.2: reg 1c: [io 0x4070-0x4073]
    [ 1.789691] pci 0000:00:1f.2: reg 20: [io 0x4040-0x405f]
    [ 1.789699] pci 0000:00:1f.2: reg 24: [mem 0xd0a17000-0xd0a177ff]
    [ 1.789745] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.789787] pci 0000:01:00.0: [1002:6841] type 00 class 0x030000
    [ 1.789802] pci 0000:01:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.789813] pci 0000:01:00.0: reg 18: [mem 0xd0900000-0xd091ffff 64bit]
    [ 1.789821] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff]
    [ 1.789835] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    [ 1.789870] pci 0000:01:00.0: supports D1 D2
    [ 1.794820] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.794825] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 1.794830] pci 0000:00:01.0: bridge window [mem 0xd0900000-0xd09fffff]
    [ 1.794836] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.794902] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.794908] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff]
    [ 1.794983] pci 0000:03:00.0: [197b:2392] type 00 class 0x088000
    [ 1.795010] pci 0000:03:00.0: reg 10: [mem 0xd0703000-0xd07030ff]
    [ 1.795124] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 1.795277] pci 0000:03:00.2: [197b:2391] type 00 class 0x080501
    [ 1.795304] pci 0000:03:00.2: reg 10: [mem 0xd0702000-0xd07020ff]
    [ 1.795566] pci 0000:03:00.3: [197b:2393] type 00 class 0x088000
    [ 1.795593] pci 0000:03:00.3: reg 10: [mem 0xd0701000-0xd07010ff]
    [ 1.801508] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
    [ 1.801529] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff]
    [ 1.801605] pci 0000:04:00.0: [1814:3290] type 00 class 0x028000
    [ 1.801624] pci 0000:04:00.0: reg 10: [mem 0xd0610000-0xd061ffff]
    [ 1.801763] pci 0000:04:00.0: PME# supported from D0 D3hot
    [ 1.801811] pci 0000:04:00.1: [1814:3298] type 00 class 0x0d1100
    [ 1.801831] pci 0000:04:00.1: reg 10: [mem 0xd0600000-0xd060ffff]
    [ 1.801970] pci 0000:04:00.1: supports D1
    [ 1.801971] pci 0000:04:00.1: PME# supported from D0 D1 D3hot
    [ 1.808178] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
    [ 1.808185] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff]
    [ 1.808255] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.808275] pci 0000:05:00.0: reg 10: [io 0x2000-0x20ff]
    [ 1.808309] pci 0000:05:00.0: reg 18: [mem 0xd0404000-0xd0404fff 64bit pref]
    [ 1.808331] pci 0000:05:00.0: reg 20: [mem 0xd0400000-0xd0403fff 64bit pref]
    [ 1.808422] pci 0000:05:00.0: supports D1 D2
    [ 1.808423] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.814790] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
    [ 1.814798] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.814805] pci 0000:00:1c.5: bridge window [mem 0xd0500000-0xd05fffff]
    [ 1.814817] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
    [ 1.814853] pci_bus 0000:00: on NUMA node 0
    [ 1.814856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 1.814983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    [ 1.815033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 1.815058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [ 1.815093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 1.815121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 1.815429] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 1.816231] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 1.820098] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 1.820131] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 1.820161] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 1.820191] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 1.820221] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 1.820251] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.820281] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 1.820313] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.820364] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.820370] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.820372] vgaarb: loaded
    [ 1.820373] vgaarb: bridge control possible 0000:01:00.0
    [ 1.820374] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.820399] PCI: Using ACPI for IRQ routing
    [ 1.826732] PCI: pci_cache_line_size set to 64 bytes
    [ 1.826819] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
    [ 1.826821] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
    [ 1.826823] reserve RAM buffer: 00000000a8cf2000 - 00000000abffffff
    [ 1.826824] reserve RAM buffer: 00000000aa000000 - 00000000abffffff
    [ 1.826890] NetLabel: Initializing
    [ 1.826891] NetLabel: domain hash size = 128
    [ 1.826892] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.826901] NetLabel: unlabeled traffic allowed by default
    [ 1.826928] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.826933] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.828944] Switching to clocksource hpet
    [ 1.833120] pnp: PnP ACPI init
    [ 1.833131] ACPI: bus type pnp registered
    [ 1.833375] pnp 00:00: [bus 00-3e]
    [ 1.833377] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.833379] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.833380] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.833382] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.833384] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.833385] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.833387] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.833388] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.833390] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.833391] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.833393] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.833394] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.833396] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.833397] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.833399] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.833400] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.833402] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.833403] pnp 00:00: [mem 0xaf200000-0xdfffffff window]
    [ 1.833405] pnp 00:00: [mem 0xf0000000-0xfedfffff window]
    [ 1.833406] pnp 00:00: [mem 0xfee01000-0xffffffff window]
    [ 1.833454] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.833518] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 1.833519] pnp 00:01: [mem 0xfed10000-0xfed17fff]
    [ 1.833521] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 1.833522] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 1.833524] pnp 00:01: [mem 0x00000000-0xffffffff disabled]
    [ 1.833525] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 1.833526] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 1.833528] pnp 00:01: [mem 0xfed90000-0xfed93fff]
    [ 1.833529] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 1.833531] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [ 1.833563] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.833565] system 00:01: [mem 0xfed10000-0xfed17fff] could not be reserved
    [ 1.833567] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.833569] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.833571] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 1.833573] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.833575] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.833576] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.833578] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 1.833581] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.833684] pnp 00:02: [io 0x0000-0x001f]
    [ 1.833685] pnp 00:02: [io 0x0081-0x0091]
    [ 1.833687] pnp 00:02: [io 0x0093-0x009f]
    [ 1.833688] pnp 00:02: [io 0x00c0-0x00df]
    [ 1.833689] pnp 00:02: [dma 4]
    [ 1.833714] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.833721] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 1.833745] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.833764] pnp 00:04: [io 0xfe00-0xfe0f]
    [ 1.833765] pnp 00:04: [io 0xfe80-0xfe8f]
    [ 1.833766] pnp 00:04: [mem 0xfed40000-0xfed44fff]
    [ 1.833800] system 00:04: [io 0xfe00-0xfe0f] has been reserved
    [ 1.833802] system 00:04: [io 0xfe80-0xfe8f] has been reserved
    [ 1.833804] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 1.833806] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.833865] pnp 00:05: [mem 0xfed00000-0xfed003ff]
    [ 1.833890] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.833897] pnp 00:06: [io 0x00f0]
    [ 1.833905] pnp 00:06: [irq 13]
    [ 1.833930] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.833937] pnp 00:07: [io 0x002e-0x002f]
    [ 1.833938] pnp 00:07: [io 0x004e-0x004f]
    [ 1.833940] pnp 00:07: [io 0x0061]
    [ 1.833941] pnp 00:07: [io 0x0063]
    [ 1.833942] pnp 00:07: [io 0x0065]
    [ 1.833943] pnp 00:07: [io 0x0067]
    [ 1.833944] pnp 00:07: [io 0x0070]
    [ 1.833946] pnp 00:07: [io 0x0080]
    [ 1.833947] pnp 00:07: [io 0x0092]
    [ 1.833948] pnp 00:07: [io 0x00b2-0x00b3]
    [ 1.833949] pnp 00:07: [io 0x0200-0x027f]
    [ 1.833951] pnp 00:07: [io 0x1000-0x100f]
    [ 1.833952] pnp 00:07: [io 0xffff]
    [ 1.833953] pnp 00:07: [io 0xffff]
    [ 1.833954] pnp 00:07: [io 0x0400-0x047f]
    [ 1.833956] pnp 00:07: [io 0x0500-0x057f]
    [ 1.833957] pnp 00:07: [io 0xef80-0xef9f]
    [ 1.833994] system 00:07: [io 0x0200-0x027f] has been reserved
    [ 1.833996] system 00:07: [io 0x1000-0x100f] has been reserved
    [ 1.833998] system 00:07: [io 0xffff] has been reserved
    [ 1.834000] system 00:07: [io 0xffff] has been reserved
    [ 1.834001] system 00:07: [io 0x0400-0x047f] has been reserved
    [ 1.834003] system 00:07: [io 0x0500-0x057f] has been reserved
    [ 1.834005] system 00:07: [io 0xef80-0xef9f] has been reserved
    [ 1.834007] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.834012] pnp 00:08: [io 0x0070-0x0077]
    [ 1.834017] pnp 00:08: [irq 8]
    [ 1.834042] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.834111] pnp 00:09: [io 0x0060]
    [ 1.834112] pnp 00:09: [io 0x0064]
    [ 1.834117] pnp 00:09: [irq 1]
    [ 1.834143] pnp 00:09: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 1.834151] pnp 00:0a: [irq 12]
    [ 1.834177] pnp 00:0a: Plug and Play ACPI device, IDs SYN0197 SYN0100 SYN0002 PNP0f13 (active)
    [ 1.834321] pnp 00:0b: [irq 23]
    [ 1.834351] pnp 00:0b: Plug and Play ACPI device, IDs HPQ6000 (active)
    [ 1.834378] pnp 00:0c: [mem 0x20000000-0x201fffff]
    [ 1.834379] pnp 00:0c: [mem 0x40004000-0x40004fff]
    [ 1.834418] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.834420] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.834422] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.834551] pnp: PnP ACPI: found 13 devices
    [ 1.834552] ACPI: ACPI bus type pnp unregistered
    [ 1.870222] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 1.870225] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 1.870269] pci 0000:00:1c.2: BAR 15: assigned [mem 0xaf200000-0xaf2fffff pref]
    [ 1.870271] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0920000-0xd093ffff pref]
    [ 1.870274] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.870276] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 1.870278] pci 0000:00:01.0: bridge window [mem 0xd0900000-0xd09fffff]
    [ 1.870281] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.870284] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.870290] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff]
    [ 1.870299] pci 0000:03:00.0: BAR 6: assigned [mem 0xaf200000-0xaf20ffff pref]
    [ 1.870300] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
    [ 1.870306] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff]
    [ 1.870310] pci 0000:00:1c.2: bridge window [mem 0xaf200000-0xaf2fffff pref]
    [ 1.870316] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
    [ 1.870322] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff]
    [ 1.870330] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
    [ 1.870333] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.870338] pci 0000:00:1c.5: bridge window [mem 0xd0500000-0xd05fffff]
    [ 1.870343] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
    [ 1.870385] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.870387] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.870389] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.870390] pci_bus 0000:00: resource 7 [mem 0xaf200000-0xdfffffff]
    [ 1.870392] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
    [ 1.870394] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
    [ 1.870395] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 1.870397] pci_bus 0000:01: resource 1 [mem 0xd0900000-0xd09fffff]
    [ 1.870399] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 1.870401] pci_bus 0000:02: resource 1 [mem 0xd0800000-0xd08fffff]
    [ 1.870402] pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff]
    [ 1.870404] pci_bus 0000:03: resource 2 [mem 0xaf200000-0xaf2fffff pref]
    [ 1.870406] pci_bus 0000:04: resource 1 [mem 0xd0600000-0xd06fffff]
    [ 1.870408] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
    [ 1.870409] pci_bus 0000:05: resource 1 [mem 0xd0500000-0xd05fffff]
    [ 1.870411] pci_bus 0000:05: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref]
    [ 1.870439] NET: Registered protocol family 2
    [ 1.870476] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 1.870562] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.870755] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 1.870852] TCP: Hash tables configured (established 131072 bind 65536)
    [ 1.870854] TCP: reno registered
    [ 1.870856] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 1.870860] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 1.870903] NET: Registered protocol family 1
    [ 1.870912] pci 0000:00:02.0: Boot video device
    [ 1.870920] pci 0000:00:14.0: enabling device (0000 -> 0002)
    [ 1.870924] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 1.870925] pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10
    [ 1.870967] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 1.871048] PCI: CLS 64 bytes, default 64
    [ 1.871077] Unpacking initramfs...
    [ 1.925882] Freeing initrd memory: 3120k freed
    [ 1.926510] apm: BIOS not found.
    [ 1.926640] audit: initializing netlink socket (disabled)
    [ 1.926648] type=2000 audit(1369492237.776:1): initialized
    [ 1.926844] highmem bounce pool size: 64 pages
    [ 1.926848] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 1.927953] VFS: Disk quotas dquot_6.5.2
    [ 1.927987] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 1.928056] msgmni has been set to 1702
    [ 1.928157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.928170] io scheduler noop registered
    [ 1.928172] io scheduler deadline registered
    [ 1.928177] io scheduler cfq registered (default)
    [ 1.928252] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.928335] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 1.928434] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 1.928531] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 1.928627] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
    [ 1.928699] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    [ 1.928701] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 1.928704] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    [ 1.928720] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 1.928724] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 1.928740] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    [ 1.928741] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 1.928743] pci 0000:03:00.2: Signaling PME through PCIe PME interrupt
    [ 1.928744] pci 0000:03:00.3: Signaling PME through PCIe PME interrupt
    [ 1.928749] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    [ 1.928763] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 1.928764] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
    [ 1.928766] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
    [ 1.928770] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 1.928784] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [ 1.928785] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
    [ 1.928790] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [ 1.928861] intel_idle: does not run on family 6 model 58
    [ 1.928899] GHES: HEST is not enabled!
    [ 1.928907] isapnp: Scanning for PnP cards...
    [ 2.285823] isapnp: No Plug & Play device found
    [ 2.285853] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.286325] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.288061] i8042: Detected active multiplexing controller, rev 1.1
    [ 2.288886] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.288905] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 2.288919] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 2.288934] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 2.288947] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 2.289004] mousedev: PS/2 mouse device common for all mice
    [ 2.289058] rtc_cmos 00:08: RTC can wake from S4
    [ 2.289171] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 2.289198] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 2.289210] cpuidle: using governor ladder
    [ 2.289211] cpuidle: using governor menu
    [ 2.289309] TCP: cubic registered
    [ 2.289377] NET: Registered protocol family 10
    [ 2.289506] NET: Registered protocol family 17
    [ 2.289510] Registering the dns_resolver key type
    [ 2.289537] Using IPI No-Shortcut mode
    [ 2.289589] PM: Checking hibernation image partition /dev/sda5
    [ 2.312918] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.325875] PM: Hibernation image not present or could not be loaded.
    [ 2.325885] registered taskstats version 1
    [ 2.326373] rtc_cmos 00:08: setting system clock to 2013-05-25 14:30:38 UTC (1369492238)
    [ 2.326410] Initializing network drop monitor service
    [ 2.326456] Freeing unused kernel memory: 524k freed
    [ 2.326569] Write protecting the kernel text: 3752k
    [ 2.326586] Write protecting the kernel read-only data: 1112k
    [ 2.326588] BFS CPU scheduler v0.424 by Con Kolivas.
    [ 2.331282] systemd-udevd[46]: starting version 203
    [ 2.350840] usbcore: registered new interface driver usbfs
    [ 2.350862] usbcore: registered new interface driver hub
    [ 2.350898] usbcore: registered new device driver usb
    [ 2.351440] sdhci: Secure Digital Host Controller Interface driver
    [ 2.351442] sdhci: Copyright(c) Pierre Ossman
    [ 2.351564] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
    [ 2.351567] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10
    [ 2.351601] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 2.351606] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.351619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.351629] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 2.351731] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 2.351748] xhci_hcd 0000:00:14.0: irq 10, io mem 0xd0a00000
    [ 2.351752] sdhci-pci 0000:03:00.0: SDHCI controller found [197b:2392] (rev 30)
    [ 2.351836] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
    [ 2.351874] Registered led device: mmc0::
    [ 2.351969] xHCI xhci_add_endpoint called for root hub
    [ 2.351972] xHCI xhci_check_bandwidth called for root hub
    [ 2.352001] hub 1-0:1.0: USB hub found
    [ 2.352009] hub 1-0:1.0: 4 ports detected
    [ 2.352081] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.352088] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 2.352182] xHCI xhci_add_endpoint called for root hub
    [ 2.352184] xHCI xhci_check_bandwidth called for root hub
    [ 2.352211] hub 2-0:1.0: USB hub found
    [ 2.352218] hub 2-0:1.0: 4 ports detected
    [ 2.352919] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
    [ 2.352937] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2391] (rev 30)
    [ 2.352957] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface.
    [ 2.353441] SCSI subsystem initialized
    [ 2.354811] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 2.354816] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 2.354826] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 2.354852] ehci_hcd 0000:00:1a.0: debug port 2
    [ 2.355201] libata version 3.00 loaded.
    [ 2.358733] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.358754] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd0a19000
    [ 2.368069] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.368209] hub 3-0:1.0: USB hub found
    [ 2.368214] hub 3-0:1.0: 2 ports detected
    [ 2.368308] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 2.368312] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 2.368319] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 2.368339] ehci_hcd 0000:00:1d.0: debug port 2
    [ 2.372224] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.372229] ehci_hcd 0000:00:1d.0: irq 16, io mem 0xd0a18000
    [ 2.381371] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.381467] hub 4-0:1.0: USB hub found
    [ 2.381471] hub 4-0:1.0: 2 ports detected
    [ 2.381534] ahci 0000:00:1f.2: version 3.0
    [ 2.381580] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
    [ 2.381617] ahci: SSS flag set, parallel bus scan disabled
    [ 2.381646] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
    [ 2.381649] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
    [ 2.381654] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.388429] scsi0 : ahci
    [ 2.388488] scsi1 : ahci
    [ 2.388534] scsi2 : ahci
    [ 2.388587] scsi3 : ahci
    [ 2.388634] scsi4 : ahci
    [ 2.388700] scsi5 : ahci
    [ 2.388893] ata1: SATA max UDMA/133 abar m2048@0xd0a17000 port 0xd0a17100 irq 46
    [ 2.388896] ata2: SATA max UDMA/133 abar m2048@0xd0a17000 port 0xd0a17180 irq 46
    [ 2.388898] ata3: DUMMY
    [ 2.388899] ata4: DUMMY
    [ 2.388900] ata5: DUMMY
    [ 2.388901] ata6: DUMMY
    [ 2.707440] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.714092] usb 1-2: new high-speed USB device number 2 using xhci_hcd
    [ 2.731354] usb 1-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
    [ 2.731358] usb 1-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
    [ 2.837193] usb 3-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.846253] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 2.846394] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
    [ 2.846398] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.848000] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 2.848133] ata1.00: configured for UDMA/100
    [ 2.853924] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
    [ 2.927028] Refined TSC clocksource calibration: 2594.107 MHz.
    [ 2.927035] Switching to clocksource tsc
    [ 2.960819] hub 3-1:1.0: USB hub found
    [ 2.960907] hub 3-1:1.0: 6 ports detected
    [ 3.066748] usb 4-1: new high-speed USB device number 2 using ehci_hcd
    [ 3.173226] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 3.186105] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 3.186112] ata2.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
    [ 3.190368] hub 4-1:1.0: USB hub found
    [ 3.190473] hub 4-1:1.0: 6 ports detected
    [ 3.201445] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 3.201453] ata2.00: configured for UDMA/100
    [ 3.207309] scsi 1:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
    [ 3.209908] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
    [ 3.209911] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 3.209971] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.209975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.210051] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.213008] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.213012] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.213137] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.256484] usb 3-1.2: new full-speed USB device number 3 using ehci_hcd
    [ 3.347820] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input1
    [ 3.347863] generic-usb 0003:03F0:A407.0001: input,hidraw0: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-1.2/input0
    [ 3.350907] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/input/input2
    [ 3.351027] generic-usb 0003:03F0:A407.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-1.2/input1
    [ 3.351045] usbcore: registered new interface driver usbhid
    [ 3.351047] usbhid: USB HID core driver
    [ 3.409566] usb 3-1.3: new high-speed USB device number 4 using ehci_hcd
    [ 3.774803] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4
    [ 3.775176] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 4.674852] PM: Starting manual resume from disk
    [ 4.674855] PM: Hibernation image partition 8:5 present
    [ 4.674856] PM: Looking for hibernation image.
    [ 4.675014] PM: Image not found (code -22)
    [ 4.675018] PM: Hibernation image not present or could not be loaded.
    [ 5.111987] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.250920] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 6.446778] systemd[1]: Inserted module 'autofs4'
    [ 6.459928] systemd[1]: Set hostname to <HP4520sNotebook>.
    [ 7.523274] systemd[1]: Cannot add dependency job for unit cdemu-daemon.service, ignoring: Unit cdemu-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status cdemu-daemon.service' for details.
    [ 7.523287] systemd[1]: Cannot add dependency job for unit modem-manager.service, ignoring: Unit modem-manager.service failed to load: No such file or directory. See system logs and 'systemctl status modem-manager.service' for details.
    [ 7.523476] systemd[1]: Starting Login Prompts.
    [ 7.523788] systemd[1]: Reached target Login Prompts.
    [ 7.523799] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 7.523834] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 7.523843] systemd[1]: Starting Remote File Systems.
    [ 7.524133] systemd[1]: Reached target Remote File Systems.
    [ 7.524142] systemd[1]: Starting Syslog Socket.
    [ 7.524449] systemd[1]: Listening on Syslog Socket.
    [ 7.524458] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 7.524761] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 7.524769] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 7.525085] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 7.525093] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 7.525406] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 7.525414] systemd[1]: Starting Delayed Shutdown Socket.
    [ 7.525722] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 7.525735] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 7.525763] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 7.525786] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 7.526149] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 7.526199] systemd[1]: Starting udev Kernel Socket.
    [ 7.526505] systemd[1]: Listening on udev Kernel Socket.
    [ 7.526546] systemd[1]: Starting udev Control Socket.
    [ 7.526856] systemd[1]: Listening on udev Control Socket.
    [ 7.526865] systemd[1]: Starting Encrypted Volumes.
    [ 7.527159] systemd[1]: Reached target Encrypted Volumes.
    [ 7.527168] systemd[1]: Starting Journal Socket.
    [ 7.527485] systemd[1]: Listening on Journal Socket.
    [ 7.560729] systemd[1]: Starting Load Kernel Modules...
    [ 7.581156] systemd[1]: Mounting Huge Pages File System...
    [ 7.601534] systemd[1]: Mounting POSIX Message Queue File System...
    [ 7.621953] systemd[1]: Starting udev Coldplug all Devices...
    [ 7.688498] systemd[1]: Started Set Up Additional Binary Formats.
    [ 7.688524] systemd[1]: Starting Setup Virtual Console...
    [ 7.759161] systemd[1]: Starting Apply Kernel Variables...
    [ 7.779592] systemd[1]: Starting Create static device nodes in /dev...
    [ 7.799991] systemd[1]: Mounting Debug File System...
    [ 7.820362] systemd[1]: Starting Journal Service...
    [ 7.841068] systemd[1]: Started Journal Service.
    [ 7.841098] systemd[1]: Expecting device dev-sda7.device...
    [ 7.844108] systemd[1]: Started File System Check on Root Device.
    [ 7.844119] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 7.864519] systemd[1]: Expecting device dev-sda5.device...
    [ 8.003303] cfg80211: Calling CRDA to update world regulatory domain
    [ 8.390753] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
    [ 8.902068] systemd-udevd[139]: starting version 204
    [ 9.740962] Linux agpgart interface v0.103
    [ 9.742419] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
    [ 9.742520] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 9.743606] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 9.743755] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
    [ 9.778185] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 9.778362] mei 0000:00:16.0: setting latency timer to 64
    [ 9.778420] mei 0000:00:16.0: irq 47 for MSI/MSI-X
    [ 9.812223] hp_accel: laptop model unknown, using default axes configuration
    [ 9.820580] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 9.820620] ACPI: Sleep Button [SLPB]
    [ 9.820672] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 9.820751] ACPI: Lid Switch [LID]
    [ 9.820805] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 9.820837] ACPI: Power Button [PWRF]
    [ 9.880136] ACPI: AC Adapter [AC] (on-line)
    [ 9.882206] ACPI: Requesting acpi_cpufreq
    [ 9.887435] iTCO_vendor_support: vendor-support=0
    [ 9.928473] wmi: Mapper loaded
    [ 9.929367] lis3lv02d: 8 bits 3DC sensor found
    [ 9.943480] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 9.943537] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 9.943591] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 9.955660] Monitor-Mwait will be used to enter C-1 state
    [ 9.955679] Monitor-Mwait will be used to enter C-2 state
    [ 9.955686] ACPI: acpi_idle registered with cpuidle
    [ 10.179283] [drm] Initialized drm 1.1.0 20060810
    [ 10.249632] ACPI: Battery Slot [BAT0] (battery present)
    [ 10.315729] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.344717] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 10.371132] thermal LNXTHERM:00: registered as thermal_zone0
    [ 10.371136] ACPI: Thermal Zone [CPUZ] (53 C)
    [ 10.450136] Linux media interface: v0.10
    [ 10.499134] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 10.499142] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 10.499201] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
    [ 10.623647] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 10.623777] r8169 0000:05:00.0: irq 49 for MSI/MSI-X
    [ 10.623937] r8169 0000:05:00.0: eth0: RTL8168evl/8111evl at 0xf8738000, b4:b5:2f:85:a8:6e, XID 0c900800 IRQ 49
    [ 10.623940] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 10.645945] usb 1-2: applying rev.C fixup
    [ 10.652542] usb 1-2: applying rev.C fixup
    [ 10.659143] usb 1-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
    [ 10.659153] usb 1-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
    [ 10.659598] MOSCHIP usb-ethernet driver 1-2:1.0: eth1: register 'MOSCHIP usb-ethernet driver' at usb-0000:00:14.0-2, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:13:3b:16:79:bf
    [ 10.659617] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
    [ 10.686387] input: HP WMI hotkeys as /devices/virtual/input/input7
    [ 10.762782] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00473/0x640000/0xa2400
    [ 10.795986] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.798335] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.798695] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.799082] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 10.806360] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
    [ 10.818885] thermal LNXTHERM:01: registered as thermal_zone1
    [ 10.818887] ACPI: Thermal Zone [GFXZ] (0 C)
    [ 10.838775] Linux video capture interface: v2.00
    [ 10.972720] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (0461:4e1d)
    [ 11.011711] [drm] radeon defaulting to kernel modesetting.
    [ 11.011713] [drm] radeon kernel modesetting enabled.
    [ 11.011724] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
    [ 11.011750] radeon 0000:01:00.0: enabling device (0000 -> 0003)
    [ 11.011920] [drm] initializing kernel modesetting (TURKS 0x1002:0x6841 0x103C:0x17F4).
    [ 11.011958] [drm] register mmio base: 0xD0900000
    [ 11.011959] [drm] register mmio size: 131072
    [ 11.081464] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 11.207484] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input10
    [ 11.207552] usbcore: registered new interface driver uvcvideo
    [ 11.207566] USB Video Class driver (1.1.1)
    [ 11.498272] thermal LNXTHERM:02: registered as thermal_zone2
    [ 11.498276] ACPI: Thermal Zone [EXTZ] (46 C)
    [ 11.499349] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 11.499405] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 11.499441] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 11.711160] WARNING! power/level is deprecated; use power/control instead
    [ 12.213082] device-mapper: uevent: version 1.0.3
    [ 12.213173] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
    [ 12.307953] Adding 19529724k swap on /dev/sda7. Priority:-1 extents:1 across:19529724k
    [ 12.702412] ATOM BIOS: HP/Wistron
    [ 12.702440] [drm] GPU not posted. posting now...
    [ 12.705224] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
    [ 12.705226] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
    [ 12.707038] [drm] Detected VRAM RAM=2048M, BAR=256M
    [ 12.707041] [drm] RAM width 128bits DDR
    [ 12.707086] [TTM] Zone kernel: Available graphics memory: 436080 kiB
    [ 12.707088] [TTM] Zone highmem: Available graphics memory: 1364312 kiB
    [ 12.707089] [TTM] Initializing pool allocator
    [ 12.707106] [drm] radeon: 2048M of VRAM memory ready
    [ 12.707107] [drm] radeon: 512M of GTT memory ready.
    [ 12.707117] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 12.707118] [drm] Driver supports precise vblank timestamp query.
    [ 12.707144] radeon 0000:01:00.0: irq 50 for MSI/MSI-X
    [ 12.707152] radeon 0000:01:00.0: radeon: using MSI.
    [ 12.707197] [drm] radeon: irq initialized.
    [ 12.707200] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 12.707359] [drm] radeon: ib pool ready.
    [ 12.707415] [drm] Loading TURKS Microcode
    [ 12.798929] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.824175] thermal LNXTHERM:03: registered as thermal_zone3
    [ 12.824177] ACPI: Thermal Zone [LOCZ] (53 C)
    [ 12.834057] thermal LNXTHERM:04: registered as thermal_zone4
    [ 12.834059] ACPI: Thermal Zone [BATZ] (24 C)
    [ 12.834443] thermal LNXTHERM:05: registered as thermal_zone5
    [ 12.834446] ACPI: Thermal Zone [PCHZ] (127 C)
    [ 12.834552] thermal LNXTHERM:06: registered as thermal_zone6
    [ 12.834555] ACPI: Thermal Zone [DM1Z] (0 C)
    [ 12.834643] thermal LNXTHERM:07: registered as thermal_zone7
    [ 12.834645] ACPI: Thermal Zone [DM2Z] (0 C)
    [ 12.851764] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14
    [ 12.852020] Registered led device: hp::hddprotect
    [ 12.852038] hp_accel: driver loaded
    [ 13.041172] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 13.041267] radeon 0000:01:00.0: WB enabled
    [ 13.041269] [drm] fence driver on ring 0 use gpu addr 0x80000c00 and cpu addr 0xff88ac00
    [ 13.057534] [drm] ring test on 0 succeeded in 1 usecs
    [ 13.057619] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 13.057813] [drm] Radeon Display Connectors
    [ 13.057814] [drm] Connector 0:
    [ 13.057815] [drm] VGA
    [ 13.057817] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
    [ 13.057818] [drm] Encoders:
    [ 13.057820] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 13.064822] [drm] Internal thermal controller with fan control
    [ 13.065645] [drm] radeon: power management initialized
    [ 13.128155] No connectors reported connected with modes
    [ 13.128159] [drm] Cannot find any crtc or sizes - going 1024x768
    [ 13.129014] [drm] fb mappable at 0xB0142000
    [ 13.129016] [drm] vram apper at 0xB0000000
    [ 13.129017] [drm] size 3145728
    [ 13.129018] [drm] fb depth is 24
    [ 13.129019] [drm] pitch is 4096
    [ 13.132598] Console: switching to colour frame buffer device 128x48
    [ 13.135472] fb0: radeondrmfb frame buffer device
    [ 13.135474] drm: registered panic notifier
    [ 13.135481] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 0
    [ 13.135775] i915 0000:00:02.0: setting latency timer to 64
    [ 13.151631] mtrr: no more MTRRs available
    [ 13.151633] [drm] MTRR allocation failed. Graphics performance may suffer.
    [ 13.151767] i915 0000:00:02.0: irq 51 for MSI/MSI-X
    [ 13.151773] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 13.151774] [drm] Driver supports precise vblank timestamp query.
    [ 13.151833] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
    [ 13.151865] vga_switcheroo: enabled
    [ 13.151905] radeon atpx: version is 1
    [ 13.152431] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 13.152434] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 13.456412] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
    [ 13.633390] fbcon: inteldrmfb (fb1) is primary device
    [ 13.633392] fbcon: Remapping primary device, fb1, to tty 1-63
    [ 14.113087] fb1: inteldrmfb frame buffer device
    [ 14.113235] [Firmware Bug]: ACPI(DGFX) defines _DOD but not _DOS
    [ 14.115105] acpi device:03: registered as cooling_device4
    [ 14.115346] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input15
    [ 14.115409] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
    [ 14.116103] acpi device:0b: registered as cooling_device5
    [ 14.116334] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16
    [ 14.116391] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 14.116417] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
    [ 24.776873] r8169 0000:05:00.0: eth0: link down
    [ 24.777050] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 27.141948] tun: Universal TUN/TAP device driver, 1.6
    [ 27.141950] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
    [ 28.793712] systemd-journald[118]: Failed to set ACL on /var/log/journal/172a25a10784a0f0f1d52e0a0000014b/user-120.journal, ignoring: Invalid argumen

    I dont know what to do. Why it wont load wifi modules on startup?
    when I try archlinux install iso it loads wifi all ok.
    lspci -nn | grep Net
    04:00.0 Network controller [0280]: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe [1814:3290]
    lspci -v
    00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
    Subsystem: Hewlett-Packard Company ProBook 4540s
    Flags: bus master, fast devsel, latency 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: agpgart-intel
    Kernel modules: intel_agp
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: d0900000-d09fffff
    Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
    Capabilities: [88] Subsystem: Hewlett-Packard Company Device 17f6
    Capabilities: [80] Power Management version 3
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [a0] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [140] Root Complex Link
    Capabilities: [d94] #19
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    Subsystem: Hewlett-Packard Company Device 17f4
    Flags: bus master, fast devsel, latency 0, IRQ 51
    Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
    Memory at c0000000 (64-bit, prefetchable) [size=256M]
    I/O ports at 4000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [d0] Power Management version 2
    Capabilities: [a4] PCI Advanced Features
    Kernel driver in use: i915
    Kernel modules: i915
    00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
    Subsystem: Hewlett-Packard Company Device 17f6
    Flags: bus master, medium devsel, latency 0, IRQ 46
    Memory at d0a00000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [70] Power Management version 2
    Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
    Kernel driver in use: xhci_hcd
    Kernel modules: xhci_hcd
    00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: Hewlett-Packard Company Device 17f6
    Flags: bus master, fast devsel, latency 0, IRQ 47
    Memory at d0a14000 (64-bit, non-prefetchable) [size=16]
    Capabilities: [50] Power Management version 3
    Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Kernel driver in use: mei
    Kernel modules: mei
    00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Device 17f6
    Flags: bus master, medium devsel, latency 0, IRQ 16
    Memory at d0a19000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci_hcd
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 17f6
    Flags: bus master, fast devsel, latency 0, IRQ 49
    Memory at d0a10000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [130] Root Complex Link
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Memory behind bridge: d0800000-d08fffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Hewlett-Packard Company Device 17f6
    Capabilities: [a0] Power Management version 2
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Memory behind bridge: d0700000-d07fffff
    Prefetchable memory behind bridge: 00000000af200000-00000000af2fffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Hewlett-Packard Company Device 17f6
    Capabilities: [a0] Power Management version 2
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Memory behind bridge: d0600000-d06fffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Hewlett-Packard Company Device 17f6
    Capabilities: [a0] Power Management version 2
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: d0500000-d05fffff
    Prefetchable memory behind bridge: 00000000d0400000-00000000d04fffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Hewlett-Packard Company Device 17f6
    Capabilities: [a0] Power Management version 2
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Device 17f6
    Flags: bus master, medium devsel, latency 0, IRQ 16
    Memory at d0a18000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci_hcd
    00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 17f6
    Flags: bus master, medium devsel, latency 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel modules: iTCO_wdt
    00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
    Subsystem: Hewlett-Packard Company Device 17f6
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 45
    I/O ports at 4068 [size=8]
    I/O ports at 4074 [size=4]
    I/O ports at 4060 [size=8]
    I/O ports at 4070 [size=4]
    I/O ports at 4040 [size=32]
    Memory at d0a17000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [70] Power Management version 3
    Capabilities: [a8] SATA HBA v1.0
    Capabilities: [b0] PCI Advanced Features
    Kernel driver in use: ahci
    Kernel modules: ahci
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon 7550M/7570M/7650M] (prog-if 00 [VGA controller])
    Subsystem: Hewlett-Packard Company Radeon HD 7650M
    Flags: bus master, fast devsel, latency 0, IRQ 50
    Memory at b0000000 (64-bit, prefetchable) [size=256M]
    Memory at d0900000 (64-bit, non-prefetchable) [size=128K]
    I/O ports at 3000 [size=256]
    Expansion ROM at d0920000 [disabled] [size=128K]
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Legacy Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [150] Advanced Error Reporting
    Kernel driver in use: radeon
    Kernel modules: radeon
    03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30)
    Subsystem: Hewlett-Packard Company Device 17f6
    Flags: bus master, fast devsel, latency 0, IRQ 18
    Memory at d0703000 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at af200000 [disabled] [size=64K]
    Capabilities: [a4] Power Management version 3
    Capabilities: [80] Express Endpoint, MSI 00
    Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
    Kernel driver in use: sdhci-pci
    Kernel modules: sdhci_pci
    03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) (prog-if 01)
    Subsystem: Hewlett-Packard Company Device 17f6
    Flags: fast devsel, IRQ 18
    Memory at d0702000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [a4] Power Management version 3
    Capabilities: [80] Express Endpoint, MSI 00
    Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
    Kernel modules: sdhci_pci
    03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30)
    Subsystem: Hewlett-Packard Company Device 17f6
    Flags: bus master, fast devsel, latency 0, IRQ 18
    Memory at d0701000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [a4] Power Management version 3
    Capabilities: [80] Express Endpoint, MSI 00
    Capabilities: [94] MSI: Enable- Count=1/1 Maskable- 64bit-
    Kernel driver in use: jmb38x_ms
    Kernel modules: jmb38x_ms
    04:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
    Subsystem: Hewlett-Packard Company Device 18ec
    Flags: bus master, fast devsel, latency 0, IRQ 10
    Memory at d0610000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Device Serial Number 00-00-25-0f-10-e2-b7-f4
    04:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
    Subsystem: Hewlett-Packard Company Device 18ec
    Flags: bus master, fast devsel, latency 0, IRQ 10
    Memory at d0600000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Device Serial Number 00-00-26-0f-10-e2-b7-f4
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 07)
    Subsystem: Hewlett-Packard Company Device 17f6
    Flags: bus master, fast devsel, latency 0, IRQ 48
    I/O ports at 2000 [size=256]
    Memory at d0404000 (64-bit, prefetchable) [size=4K]
    Memory at d0400000 (64-bit, prefetchable) [size=16K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [70] Express Endpoint, MSI 01
    Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
    Capabilities: [d0] Vital Product Data
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Virtual Channel
    Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
    Kernel driver in use: r8169
    Kernel modules: r8169

  • My USB port (closest to the screen) is not working? And what is an IR Receiver in my USB port?

    Hi everyone,
         I recently found out that my USB port, closest to my screen, is not working. Before I called Apple Care for help, I performed a PRAM and a SMC RESET, which unfortunately did not work. I called Apple Care and they help me troubleshoot simple resets such as, shutdowns and restarts. The representative I spoke with conluded that the physical hardware has an issue and must be brought to the Apple Store for a diagnosis. I called the Apple Store to at least budget the fee for getting a USB port fixed and it's about $300.00. I never dropped my macbook or had any sort tactile encounterment with hard surfaces by dropping or hitting. I don't understand how my macbook pro would be physically damaged. I then thought maybe my software was out of date (right now I am running 10.9 Mavericks) or I forgot to do the minor software updates, but I was at a lost again because my macbook is up-to-date. I searched for further help and found a way to monitor what's plugged into my usb ports. (I read in the apple forums that a girl had nothing in her usb ports, but upon looking at the System Information> Hardware> USB, that the macbook recognizes that there are drives in the ports) I looked at my ports; one is being used by wirless mouse (the port that works) and the other (the port that doesnt work) is being used by an "IR RECEIVER". Now, is the IR Receiver actually using that port and that's why my macbook cannot recognize other devices inserted into that port? Or is the IR RECEIVER suppose to be in that port and that the hardware for that port is simply damaged (which would mean I need $300.00 to get that fixed)? I know this is a lot, but someone help me?
    (PORT THAT WORKS)
    USB Hi-Speed Bus:
      Host Controller Location:          Built-in USB
      Host Controller Driver:          AppleUSBEHCI
      PCI Device ID:          0x1c2d
      PCI Revision ID:          0x0005
      PCI Vendor ID:          0x8086
      Bus Number:          0xfa
    FaceTime HD Camera (Built-in):
      Product ID:          0x8509
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:           5.16
      Serial Number:          DJHBAJ06VRDH7FL0
      Speed:          Up to 480 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa200000 / 3
      Current Available (mA):          500
      Current Required (mA):          500
    Hub:
      Product ID:          0x2513
      Vendor ID:          0x0424  (SMSC)
      Version:           b.b3
      Speed:          Up to 480 Mb/sec
      Location ID:          0xfa100000 / 2
      Current Available (mA):          500
      Current Required (mA):          2
    Microsoft® Nano Transceiver v2.0:
      Product ID:          0x0745
      Vendor ID:          0x045e  (Microsoft Corporation)
      Version:           6.34
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Microsoft
      Location ID:          0xfa130000 / 6
      Current Available (mA):          500
      Current Required (mA):          100
    Apple Internal Keyboard / Trackpad:
      Product ID:          0x0252
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:           1.18
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa120000 / 5
      Current Available (mA):          500
      Current Required (mA):          40
    BRCM2070 Hub:
      Product ID:          0x4500
      Vendor ID:          0x0a5c  (Broadcom Corp.)
      Version:           1.00
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa110000 / 4
      Current Available (mA):          500
      Current Required (mA):          94
    Bluetooth USB Host Controller:
      Product ID:          0x821a
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:           0.42
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa113000 / 8
      Current Available (mA):          500
      Current Required (mA):          0
    (PORT THAT DOESN'T WORK)
    USB Hi-Speed Bus:
      Host Controller Location:          Built-in USB
      Host Controller Driver:          AppleUSBEHCI
      PCI Device ID:          0x1c26
      PCI Revision ID:          0x0005
      PCI Vendor ID:          0x8086
      Bus Number:          0xfd
    Hub:
      Product ID:          0x2513
      Vendor ID:          0x0424  (SMSC)
      Version:           b.b3
      Speed:          Up to 480 Mb/sec
      Location ID:          0xfd100000 / 2
      Current Available (mA):          500
      Current Required (mA):          2
    IR Receiver:
      Product ID:          0x8242
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:           0.16
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Apple Computer, Inc.
      Location ID:          0xfd110000 / 3
      Current Available (mA):          500
      Current Required (mA):          100

    I can help with the "IR Receiver" part of your question. That's the piece of hardware inside older MacBook Pros (MBPs) that lets them work with the Apple Remote. "IR" is the standard abbreviation for "infrared," the portion of the electromagnetic spectrum used by remotes for many common devices (stereos, cable boxes, Apple TVs, etc.). The remote sends a coded stream of IR pulses; a corresponding receiver in the target device "sees" the infrared light and decodes it. The MBP's internal IR Receiver sends the received signals to the processor via USB through an internal hub.
    The most recent MacBook Pros have dropped the IR receiver and no longer work with the Apple Remote.

  • Host command is not working on linux

    Hi
    I m using linux for application server n windows for client. I need to create folder from client machine by cliking a button of forms10g runtime.HOST command is not working which was working fine in windows.
    Any help is appriciateable.
    kazi mokarem

    Hi
    I had the same issue on linux a few weeks back. What tuned out was, when you install the Oracle app svr it does not include the system paths by default.
    The path where mkdir is located may not be visible to the app.
    Try to hardcode the path for mkdir as /bin/mkdir .... and seee if that works.
    If the above statement works then add that path in the paths variable in default.env file located in $ORACLE_HOME/forms/server directory
    HTH
    Arvind

  • Audio driver not working in hp 2000 - 2116tu laptop

    Audio driver not working in hp 2000 - 2116tu laptop
    Driver installed : sp57716.exe
    From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
    OS : Windows 7 Pro x64
    Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
    Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.

    Hi architsomani,
    Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Dvd drive not worked properly

     i have  hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action  till now .why u people do like this .i want explation and just change my  dvd drive that's all.

    tcrite,
    Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
    Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • Controller is not working custom Region

    Hi ,
    I am working on customization of OA pages ,IMCAccountOverviewEditPG, on Oracle customer online.The requirement is to add a new advance table region on at the bottom of this page. The application is on 11.5.10 2CU .
    So here is test that i tried
    CUSTOM REGION:
    1) I have created a indepedent test region EQXAccountContactRN of type MessageCOmponenetLayout. Under that i have created Mesage layout. Under this region i have created a message text input and a submit button.
    I have attached a controller EQXAccountContactRNCO with EQXAccountContactRN which is just Helloworld program.
    Using XML import i have imported this test region. Import works fine.
    /oracle/apps/imc/customer/account/createupdate/webui/
    I have also copied the controller in the EQXAccountContactRNCO.class in the above server webui folder
    ATTACHING THE CUSTOM REGION USING PERSONALIZATION:
    2) Using personalization on IMCAccountOverviewEditPG page, i have created an item of "Flexible Layout" type.
    2)I have added "Flexible content" region unde the Flexible Layout using personalization which extend EQXAccountContactRN created in step one.
    3) I have bounced the apache and looked into the IMCAccountOverviewEditPG page, I can see my Custom SO FAR SO GOOD.
    4) But The controlller EQXAccountContactRNCO ,associated with the EQXAccountContactRN custom page is not working. I have put a test code both in the processRequest() and PrcessFormRequest both are not working.
    A) Can you please tell me why the custom controller is not working ?
    B) Also the flexible content region do not shows the custom controller , all it show is following controller.
    oracle.apps.fnd.framework.webui.OAFlexibleLayoutCO 115.12
    oracle.apps.fnd.framework.webui.OAFlexibleContentCO 115.12

    Also if some one knows a better appoach to modify a exisitng page, please comment here.

Maybe you are looking for

  • Berkeley Xml 2.4.13 works on Tomcat but not on Glassfish

    I recently upgraded my web app to using the latest version of Berkeley Xml from 2.3. The old version worked fine on both glassfish and tomcat java servers. When I upgraded and made the necessary modifications to my app I could not get it to work on g

  • Iphoto won't quit, won't import photos, stalls while editing photos despite rebuilding the database

    I have mountain lion and the newest version of iphoto.   It won't quit unless I force quit it, it won't import photos, it won't let me edit photos without freezing up.   I have tried rebuilding the database and repairing permissions without success

  • End jump woes

    I have a single track with 4 chapter markers. Each chapter marker end jumps back to my main menu. For chapters 2, 3 and 4 this works perfectly. However, when the track gets to the end of the first chapter, it continues on, without returning to the ma

  • E1200 Parental control seems not functioning well...

    Hello, friends, I have a LinkSys E1200 wireless router at home. I set up the parental control, limiting the internet access between 8am - 11pm only. However, to my surprise, my son can still use the facebook to chat with his friends after 11:00pm! I

  • Problem viewing video

    For apple TV we can see the icon and hear the sound we just cant see the picture. Everything is updated. Any idea what to do?